POWER for each IC

Modulator 5.3VA Hi-Fi IC NICAM IC SECAM IC Power Control Timer Control 5.3VA AVCP IC TUNER
IC to detect ACK data is selected as below because IC is different in accordance to region and option

S/ Series P/Y/I Series

5V POWER 5VT POWER 5V POWER 5VT POWER
SECAM IC AVCP IC Modulator AVCP IC
*Short protection off mode : DJ01 Diode in
SERVICE NOTICE ON REPLACING EEPROM
In case that defective EEPROM of PAL models is replaced, to operate these sets from the initial state MP KEY must be repaired as well before delivering to the customer. If MP KEY isnt repaired the setting of RF OUT channel or LANGUAGE might be different from that for custormers country. MP KEY : In case of PAL VCR if holding the REC button on the front panel and the CLEAR button on the remote control handset for 5 ~ 7 seconds with power being switch all and no tapes, OK is displayed at FLD for FLD models and LED becomes on for LED CLOCK models. This is the state that initializing EEPROM is finished. (In case of PAL VCP if holding the REC button on the front panel and the MENU button on the remote control handset for 5 ~ 7 seconds with power being off and no tapes, All the LED DOTs become on. This is the state that initializing EEPROM is finished.) MP KEY's function : MP KEY sets EEPROM's data up to the initial state.

REC VCR TIMER AM

FLD MODEL: MP KEY OK
LED CLOCK MODEL: MP KEY Switch all on a Light
LED DOT MODEL: MP KEY Switch all on a Light
SERVICE INFORMATION FOR EEPROM IC SETTING
EEPROM option code No. setting
MODEL HR-J283EU NAME 02 C0 C8 B50 0C C0 C0 B50 0C C0 C8 B50 HEX BINARY 00000000 00000000
NAME 02 C0 C0 B48 HR-J290EU E2 HR-J293EU C1 C8 B48 HR-J585EU 0C C0 C0 B48 HR-J590EU/ EC J593EU C1 C8 B48 HR-J595EK 2C C0 C8 B43 HR-J595MS 6C CB40 HR-J295MS 62 CB40 HR-J295EK 02 C0 C8 B43 HR-J282EU 02 C0 C0 B50

MODEL HR-J285EU

HEX 00 00

BINARY 00000000 00000000

HR-J582EU

HR-J583EU

# Remote control Key action OK : Now option data write to EEPROM MENU : Menu exit EDIT : vw (Option data change from 0~F Hexadecimal) MOVE : vw (Cursor move for option data setting) v v
EEPROM option code No. setting procedure
1. Power Cord plug-in and Power SW on, then EEPROM option data setting screen to the left will be displayed. # If not, press the Child lock key on the Remote controller to switch with CANAL because the VCR set has CANAL IC inside. # If your VCR set has NTSC Line Record, switch the VCR set to AV mode after inputting the Line Video signal. If not, the Blue back screen may be shown in to screen. 2. Refer to option data in the next page and input the value to the HEX field using EDIT key only, and then press the OK key on the Remote controller. 3. Check the basic operation (Tuner/PB/CUE/REV/AV/REC mode.) 4. Initialize the EEPROM IC pressing the REC key on the Front Panel and CLEAR key on the Remote controller at the same time.

No sound YES Check the Vcc of IC301 Pin 18. YES Check the Tuner Audio signal at IC301 Pin 13. YES Check the Audio signal at IC301 Pin 11. YES Check the signal flow from IC301 pin 11 to IC901 Pin 6. NO Replace IC301. NO Chekc the signal flow from TU701 Pin21 to IC301 Pin 13. NO Check 5VT power.
(3) No sound (Hi-Fi Model)
No sound YES Check the Vcc of IC751 Pins 1, 19, 33. YES Check the Tuner SiF signal at IC751 Pin 2. YES Check the oscillator of IC751 Pins 5, 6. YES Check the Audio of IC751 Pins 30, 31. YES Check the Audio of IC801 Pins 2, 3. YES Check the Audio of IC801 Pins 18, 19. YES Check the signal flow from IC801 pins 18, 19 to JK901 Pins 1, 3. NO Check the IIC Clock and Data at IC801 Pins 42, 43. NO Check the signal flow from IC751 Pins 30, 31 to IC801 Pins 2,3. NO Check the IIC Clock and Data at IC751 Pins 12, 13. NO Replace X751. NO Check the Tuner Audio of TU701 Pin 21. NO Check 5V power.
6. Hi-Fi Circuit (Hi-Fi Model)

A. Hi-Fi Playback.

No sound
Check the Vcc of IC801.(Pins 34, 40)

NO YES

Check the Hi-Fi Selection Switch and the Tape quality.

Check power.

Is the RF Envelope at IC801 Pin 44 over 2Vp-p?
Is the Head switching signal IC802 Pin 41 O.K?
Check IC501 Pin 23. (Audio head switch 25)
Check IC801 Pin 42(Data), Pin 43(Clock).
Check the connection at P3D01 if good then Replace IC801.
Do Audio signals appear at IC801 Pin 16(L-CH), 17(R-CH)?

Check Ports of -COM.

Check the Signal path of Audio Output.

Replace IC801.

B. Hi-Fi REC.
It is impossible to record and playback Hi-Fi Audio signal.
Check Vcc of IC801. (Pins 34,40)
Check IC801 Pin 42(Data),Pin 43(CLOCK).
Do Audio signals appear at IC801 Pins 16, 17?

Check ports of -COM.

Do FM Audio signals appear at IC801 Pin 36?
Check Audio input signal of IC801 Pins 2, 3(TU.A.), 6, 7(Scart 1)
Check the Contact Points of Drum Connector if good then Replace the Drum.

CONTENTS

DECK MECHANISM PARTS LOCATIONS
Top View...4-1 Bottom View..4-1
DECK MECHANISM ADJUSTMENT
Tools and Fixtures for Service.4-12 1. Mechanism and Mode Switch Alignment Check..4-13 2. Deck Preparation for Adjustment.4-14 3. Checking Torque..4-14 4. Guide Roller Height Adjustment.4-15 4-1. Preliminary Adjustment..4-15 4-2. Precise Adjustment.4-15 5. Audio/Control (A/C) Head Adjustment.4-16 5-1. Preliminary Adjustment..4-16 5-2. Confirmation of Tape Path between Pinch Roller and Take-up Guide..4-17 5-3. Precise Adjustment(Azimuth Adjustment)..4-17 6. X-Value Adjustment..4-17 7. Adjustment after Replacing Drum Assembly (Video Heads)...4-18 8. Check the Tape Travel after Reassembling Deck Mechanism..4-18 8-1. Checking Audio and RF Locking Time during Playback after CUE or REV..4-18 8-2. Checking Tape Curling or Jamming..4-18

DECK MECHANISM DISASSEMBLY
1. Drum Assembly...4-2 2. Plate Top...4-4 3. Holder Assembly CST.4-4 4. Opener Door..4-4 5. Bracket Assembly L/D Motor.4-4 6. Gear Assembly Rack F/L.4-4 7. Arm Assembly F/L..4-4 8. Lever Assembly S/W..4-4 9. Arm Assembly Cleaner..4-5 10.Head F/E...4-5 11. Base Assembly A/C Head..4-5 12.Brake Assembly RS..4-6 13.Brake Assembly T..4-6 14.Arm Assembly Tension..4-6 15.Reel S / Reel T..4-6 16.Base Assembly P4.4-7 17.Opener Lid..4-7 18.Arm Assembly Pinch..4-7 19.Lever T/up / Arm T/up.4-7 20.Belt Capstan/Motor Capstan.4-8 21.Lever F/R..4-8 22.Clutch assembly D35..4-8 23.Bracket Assembly Capstan..4-8 24.Gear Drive/Gear Cam.4-9 25.Gear Sector..4-9 26.Plate Slider..4-9 27.Lever Tension..4-9 28.Lever Spring...4-9 29.Gear Assembly P2/ Gear Assembly P3..4-10 30.Base Assembly P2/ Base Assembly P3..4-10 31.Base Loading..4-11 32.Base Tension..4-11 33.Arm Assembly Idler Jog.4-11
MAIN TENANCE/INSPECTION PROCEDURE
1. 2. 3. 4. Check before starting Repairs.4-19 Required Maintenance..4-20 Scheduled Maintenance.4-20 Supplies Required for Inspection and Maintenance..4-20 5. Maintenance Procedure.4-20 5-1. Cleaning..4-20 5-2. Greasing..4-21
MECHANISM TROUBLESHOOTING GUIDE
1. Deck Mechanism..4-23 2. Front Loading Mechanism..4-26
1. Front Loading Mechanism Section.4-28 2. Moving Mechanism Section (1)..4-29 3. Moving Mechanism Section (2)..4-30

Top View

Pracedure Starting No. 11 2,2,2,2,3,12,13, 17,20, 26 2,3,4 2,3,4,6
Drum Assembly Plate Top Holder Assembly CST Opener Door Bracket Assembly L/D Motor Gear Assembly Rack F/L Arm Assembly F/L Lever Assembly S/W Arm Assembly Cleaner Head F/E Base Assembly A/C Head Brake Assembly RS Brake Assembly T Arm Assembly Tension Reel S/Reel T Base Assembly P4 Opener Lid Arm Assembly Pinch Lever T/Up / Arm T/Up Belt Capstan/Motor Capstan Lever F/R Clutch Assembly D35 Break Assembly Capstan Gear Drive/Gear Cam Gear Sector Plate Slider

Fixing Type

3 Screw 2 Hook Chassis Hole Chassis Hole 3 Hook 1 Hook, Chassis Hole Chassis Hole 1 Hook Chassis Embossing Chassis Embossing 1 Screw 1 Hook 1 Hook 2 Hook

Fig- Viure ew

A-1 A-2 A-2 A-2 A-2 A-2 A-2 A-2 A-3 A-3 A-3 A-4 A-4 A-4 A-4 A-5 A-5 A-5 A-5 A-6 A-6 A-6 A-6 A-7 A-7 A-7 A-7 A7 T T T T T T T T T T T T T T T T T T T B B B B B B B B B
Chassis Embossing Chassis Embossing Shaft 1 Hook 3 Screw Locking Tab Washer Locking Tab Washer/Hook 1 Hook Shaft Guide 1 Hook Locking Tab

Bracket assembly L/M

(1) When reassembling, push the Plate Top after alignment the two position(C), (C) as Fig.
6. Gear Assembly Rack F/L (Fig. A-2-5)

(C') (C) (B') (B)

1) Move the Gear Assembly Rack F/L in direction of arrow(A) and unhook the Hook(H6) pulling back in front. 2) Separate the Rear Rack F/L in direction of arrow(B).
When reassembling, align the Gear part of the Gear Assembly Rack F/L with the Gear Drive as below Fig.
3. Holder Assembly CST (Fig.A-2-2)
1) Move the Holder assembly CST in direction of arrow and separate the left side of it first through the (D) position of the Chassis.
Holder assembly CST Chassis Gear Drive

Gear Rack F/L

7. Arm assembly F/L (Fig. A-2-6)
1) Move the Arm assembly F/L in direction of arrow and separate the left side of it first. 2) Disassemble the Arm assembly F/L from each guided Hole of the Chassis.
2) Disassemble the right side of the Holder assembly CST from each guided hole of the Chassis.
8. Lever assembly S/W(Fig. A-2-7)
1) Hook the Spring Lever S/W on the Hook(H7) first as below Fig. 2) Unhook the Hook(H8) in the left side of the Chassis and move the Lever assembly S/W.

Chassis

When reassembling, insert the (E) part of the Holder assembly CST in the (E) hole of the Chassis first and assemble the left side of it.
4. Opener Door (Figure. A-2-3)
1) Turn the Opener Door clockwise and remove it through the guide hole of the chassis.

(H8) (H7)

5. Bracket assembly L/D Motor(Fig. A-2-4)
1) Unplug the Connector(C1).

Spring Lever S/W

Arm Assembly Cleaner (Fig. A-3-1) (A)
(S4) (A) Base Assembly A/C Head

*(Fig. A-3-3)

Head F/E (Fig. A-3-2)
Fig. A-3 9. Arm assembly Cleaner (Fig. A-3-1)
1) Breakaway the (A) portion as Fig. A-3-1 from the Embossing of the Chassis, turn the Arm assembly Cleaner to clockwise direction and lift it up.
11. Base assembly A/C Head (Fig. A-3-3)
1) Remove the Screw(S4) and lift the Base assembly A/C Head up.

10. Head F/E (Fig. A-3-2)
1) Breakaway the (A) portion of the Head F/E from the Embossing of the Chassis, turn it to counterclockwise direction and lift it up.

Arm Assembly Tension

(Fig. A-4-3)
(H11) Spring TB Brake Assembly T

(Fig. A-4-1)

Spring Tension

Reel S

(Fig. A-4-4)

Reel T

Spring RS

Brake Assembly RS

(Fig. A-4-2)

(H12) (H9) (H10)

Base Tension
Fig. A-4 12. Brake assembly T (Fig. A-4-1)
1) Unhook the Spring TB from the Hook(H9) of the Chassis. 2) Lift the Brake assembly T up.
Difference for Springs (Difference for Springs)
13. Brake assembly RS (Fig. A-4-2)
1) Unhook the Spring RS from the Hook(H10) of the Chassis. 2) Lift the Brake assembly T up.
Spring TB Color (Black) Spring RS Spring Tension
15. Reel S / Reel T (Fig. A-4-4)
1) Difference for Reel S / Reel T
14. Arm assembly Tension (Fig. A-4-3)
1) Unhook the Spring Tension from the Hook(H11) of the Arm assembly tension. 2) Unhook the Hook(H12) of the Base Tension and lift the Arm assembly Tension up.

Opener Lid (B)

(Fig. A-5-2)

Arm Assembly Pinch

(Fig. A-5-3)
(C) Base Assembly P4 Lever T/up

(Fig. A-5-1)

(Fig. A-5-4)

Arm T/up

(Fig. A-5-5)
Fig. A-5 16. Base assembly P4 (Fig. A-5-1)
1) Breakaway the (A) portion of the Base assembly P4 from the Embossing of the Chassis. 2) Turn the Base assembly P4 to counterclockwise direction and lift it up.
19. Lever T/up (Fig. A-5-4)/ Arm T/up (Fig. A-5-5)
1) Unhook the Hook(H13) of the bottom Chassis and lift the Lever T/up up. 2) Lift the Arm T/up up.
17. Opener Lid (Fig. A-5-2)
1) Breakaway the (B) portion of the Opener Lid from the Embossing of the Chassis. 2) Turn the Opener Lid to clockwise direction and lift it up.
When reassembling, confirm the (C) portion of the Arm assembly Pinch is inserted to the Chassis Hole correctly as Fig. Place the Mechanism face down, or up side down.
18. Arm assembly Pinch (Fig. A-5-3)
1) Lift the Arm assembly Pinch up.

Belt Capstan

(Fig. A-6-1)

Motor Capstan

(Fig. A-6-2)

Washer(W1)

Clutch Assembly D35 (L1) Brake Assembly Capstan

When reassembling, align the two Holes of the Gear assembly P2 and P3 in a straight line after confirmation whether the Gear Sector Hole(A) and the Plate Slider Hole(B) are aligned or not as Fig.

(S7) Base Loading

(Fig. A-9-2)

(Fig. A-9-1)

Arm Assembly Idler Jog

(Fig. A-9-3)

Fig. A-9 31. Base Loading (Fig. A-9-1)
1) Remove the Screw(S7). 2) Lift the Base Loading up.
33. Arm assembly Idler (Fig. A-9-3)
1) Make narrower the two parts, (A) and (B), as Fig. A-9-3. 2) Lift the Arm assembly Idler up.
32. Base Tension (Fig. A-9-2)
1) Breakaway the (A) portion of the Base Tension from the Embossing of the Chassis. 2) Turn the Base Tension to counterclockwise direction and lift it up.
When disassembling, be careful not to be caught the (D) part by the Chassis as Fig.
Tools and Fixfures for Service
1. Cassette Torque meter 1. PUJ42881 1. 2. Alignment tape MHPE 3. Torque gauge 3. PUJ48075-2 3.
VID K CAS EO S TOR ETTE Q MET UE VHT- ER 303

K - V H T 0T SR 150

4. Post height adjusting driver (Roller driver) PTU94002
1.Mechanism Alignment Position Check
Purpose:To determine if the Mechanism is in the correct position, when a Tape is ejected.
Test Equipment/ Fixture Blank tape Test Conditions (Mechanism Condition) Eject Mode (with Cassette ejected) Check Point Mechanism and Mode Switch Position
1) Turn the Power S/W on and eject the Cassette by pressing the Eject Button. 2) Remove the Top Cover and Plate Assembly Top, visually check if the Gear Cam Hole is aligned with the Chassis Hole as below Fig. C-2. 3) IF not, rotate the Shaft of the Loading Motor to either Clockwise or Counterclockwise until the Alignment is as below Fig. C-2.
4) Remove the Screw which fixes the Deck Mechanism and Main Frame and confirm if the Gear Cam is aligned with the Gear Drive as below Fig. C-1(A). 5) Confirm if the Mode S/W on the Main P.C.Board is aligned as below Fig. C-1(B). 6) Remount the Deck Mechanism on the Main P.C.Board and check each operation.

CHECK DIAGRAM

Mode S/W
Gear Drive Gear Cam (o) and Gear Drive (o) groove alignment

BOTTOM VIEW Fig. C-1

L/D Motor Assembly

Gear Cam (A') (B) (A)

(B') Chassis Hole Gear Cam Hole Gear Cam Hole

TOP VIEW Fig. C-2

2. Preparation for Adjustment (To set the Deck Mechanism to the Loading state without inserting a Cassette Tape).
1) 2) 3) 4) Unplug the Power Cord from the AC Outlet. Disassemble the Top Cover and Plate Assembly Top. Plug the Power Cord into the AC Outlet. Turn the Power S/W on and push the Lever Stopper of the Holder Assembly CST to the back for Loading the Cassette without Tape. Cover the Holes of the End Sensors at the both sides of the Bracket Side(L) and Bracket Assembly Door to prevent a light leak. Then The Deck Mechanism drives to the Stop Mode. In this case, The Deck Mechanism can accept inputs of each mode, however the Rewind and Review Operation can not be performed for more than a few seconds because the Take-up Reel Table is in the Stop State and can not be detected the Reel Pulses.

MAINTENANCE/INSPECTION PROCEDURE
1 Check before starting repairs
The following faults can be remedied by cleaning and oiling. Check the needed lubrication and the conditions of cleanliness in the unit. Check with the customer to find out how often the unit is used, and then determine that the unit is ready for inspection and maintenance. Check the following parts.
Phenomenon Inspection Replacement o

F/E Head

Color beats

Dirt on full-erase head

Poor S/N, no color Vertical or Horizontal jitter Low volume, Sound distorted Tape does not run. Tape is slack In Review and Unloading (off mode), the Tape is rolled up loosely.
Dirt on video head Dirt on video head Dirt on tape transport system Dirt on Audio/control head

Video Head

A/C Head Pinch Roller

Fig. C-9-1 Top VIEW

Dirt on pinch roller Clutch Assembly D33K Torque reduced Cleaning Drum and transport system

Belt Capston

Clutch Assembly D33K

Fig. C-9-3

If locations marked with o do not operate normally after cleaning, check for wear and replace. See the EXPLODED VIEWS at the end of this manual as well as the above illustrations See the Greasing (Page 4-22) for the sections to be lubricated and greased.

Fig. C-9-2 BOTTOM VIEW

* No. (1)~(13) Indicates the Tape Path to be traveled from Supply Reel to Take-up Reel.
(3) F/E Head (6) Base Assembly P3 (7) A/C Head (8) P4 Post (5) Drum Assembly (Video Head) (4) Base Assembly P2 (2) Tension Post (1) Supply Reel (12) Take-up Reel (10) Pinch Roller (11) Take-up Guide Post

(9) Capstan Shaft

Fig. C-9-3 Tape Transport System 4-19

2. Required Maintenance

The recording density of a VCR(VCP) is much higher than that of an audio tape recorder. VCR(VCP) components must be very precise, at tolerances of 1/1000mm, to ensure compatiblity with other VCRs. If any of these components are worn or dirty, the symptoms will be the same as if the part is defective. To ensure a good picture, periodic inspection and maintenance, including replacement of worn out parts and lubrication, is necessary.

NOTE:Greasing Points

1) Loading Path Inside & Top side 2) Base Tension Boss inside Hole 3) Arm Assembly F/L "U" Groove 4) Arm Take-up Rubbing Section 5) L/D Motor Gear Wheel Part
6) Shaft 7) Arm Assembly F/L of Buming Inside Hole 8) Reel S, T Shaft (G381:Yellow) 9) Brake T Groove

Chassis (Bottom)

Chassis (Top)

Gear Part

Gear Sector
Gear Cam Guide Rack F/L Gear Rack F/L

Base Loading

Gear Drive

Guide Rail

Bracket Side (L)

Bracket Assembly Door

GEAR , F/R

GEAR AY, P2 & P3

1.Deck Mechanism

Auto REW doesn't work.

Is the output of END sensor of supply side "H"? H: more than 3.5V L: less than 0.7V~1V
Is the Vcc. voltage of End sensor 5V?

Check the syscon power.

Replace End sensor.
Is the voltage across IR LED between 0.8~1.5V?

Replace LED.

Check syscon circuit.

No F/R modes.

Is the present mode, F/R Mode?
Is the mode SW assembled correctly (refer to Pages 4-14.)
Does the Capstan Motor rotate? Is the normal voltage supplied to the Capstan Motor Vcc1, Vcc2.?
Do the T/Up, Supply Reel rotate?
Does terminal voltage(Vctl) of Capstan Motor supply side more than 4V?
Check Servo, Power Circuits.
Replace the Capstan Motor.
AUTO STOP. (PLAY/CUE/REV)
Check aligment positions (page 414) Check spring Pinch. In Play/Cue/Rev is the pinch roller in contact with the capstan shaft.
Is the output of DFG, DPG OK? Replace Drum Motor.

NO YES NO

Check Servo, Syscon.
Are there T/up and supply reel pulses.
Check the Syscon, -COM. Replace Reel Sensor.

No cassette loading.

Insert the cassette.
Does the lever Assembly S/W work normally.
Check Holder Assembly CST.
Is there variation for CST IN S/W Output? (In Tape with REC Tab LHL) (In Tape without REC Tab LHLH)
Does the CST IN S/W work normally?

Replace CST IN S/W.

Check Syscon Circuit. Check Syscon Circuit.
In PB mode Tape Presence not sensed.
Is the Pinch Roller attached to the Capstan Motor Shaft?
Check Alignment positions (page 4-14)

Does the T/Up Reel turn?

Is the Belt ok?

Replace the Belt.

Does the Capstan Motor turn?
Check the clutch and the Idler Assembly.
Does the Drum Motor turn?
Is the Voltage supplied to the Capstan Motor Vcc1,Vcc2 each?
Are there DPG, DFG Pulses?
Is the terminal voltage of Capstan Motor supplied more than 4V?

Check Servo, Power.

Are the T/Up Supply Reel Sensors ok?
Check Servo, Syscon. Is the Vcc voltage of the Drum Motor normal?

Check Syscon, Circuit.

Is the terminal voltage of the Drum Motor more than 2.3V?

-COM is unstable. Q501, Q503 are defective.
WAVEFORM & VOLTAGE SHEET
_ IC301 Oscilloscope Waveform
IC301 Pin 20 PB mode 500mvp-p
IC301 Pins 38,32,31 38, 38 Video in 1Vp-p
IC301 Pin 28 PB/REC mode 4.0Vp-p
IC301 Pin 7 REC mode 1.1Vp-p
IC301 Pin 6 REC mode 2.0Vp-p
IC301 Pin 29 PB mode 2.02Vp-p
IC301 Pin 41 PB mode 400mVp-p
IC301 Pin 64 PB mode 400mVp-p
IC301 Pin 23 PB/REC mode 5Vp-p
IC301 Pin 24 PB/REC mode 5Vp-p
IC301 Pins REC mode 340mVp-p
IC301 Pins PB mode 300mVp-p
IC301 Pin 63 PB mode 400mVp-p
IC301 Pin 11 PB mode 3.6Vp-p
* IC501 Waveform Photographs
V.HSW (IC501 Pin 105) 1V/10mS REC/PB MODE
DV.SYNC (IC501 PIN 109) 1V/100uS QUE/REV MODE
CTL(+) (IC501 Pin 3) 1V/10mS
CTL(-) (IC501 Pin4) 1V/10mS
DFG/FG (IC501 PIN 103,104) 1V/10mS REC/PB MODE

CFG (IC501 Pin9) 1V/10mS

V.IN (IC501 Pin 17) 500mV/20uS
V.OUT (IC501 Pin 19) 500mV/20uS EE/PB MODE
C.SYNC (IC501 Pin 111) 1.0V/100uS EE/PB MODE
5. Hi-Fi, SCART Circuit Diagram
IC801 42, 43 Pins are defective. All Audio is not appear.
F. PWR F/To A/V F/To PWR F/To SYS F/To A/V

F/To A/V

F/To Tuner

- To STS or SYSTEM

- F. POWER

F. PWR

PB Hi-Fi NORMAL Audio

V.OUT V.IN

CIRCUIT VOLTAGE CHART
MODE PIN NO. R A K EE PB REC MODE PIN NO. 11 2.4.07 2.52 2.41 3.3.2.19 3.25 4.01 2.56 3.06 3.22 0.22 0.13 2.22 2.06 2.5.06 5.06 2.37 2.38 2.11 0.18 0.41 2.5.21 2.2.2.0 2.5.29 4.94 5.29 5.29 2.5.46 2.26 5.17 2.26 5.17 4.3.36 3.07 3.06 5.16 0.13 1.44 2.07 4.23 2.4.7 4.7 2.85 0.33 2.17 3.35 2.09 1.99 9.0 5.17 2.4 2.34 2.33 2.69 2.28 2.29 2.28 2.27 2.26 2.29 2.2.26 EE 2.41 2.5.0 5.15 0.02 2.29 PB 2.41 2.1 5.29 5.0 5.14 0.03 2.29 1.46 2.26 2.28 2.28 2.27 2.26 2.29 2.39 0.02 2.3 0.02 2.26 0.16 2.26 5.17 4.1.96 3.06 3.03 5.16 3.44 1.82 2.1 4.21 2.4.7 4.7 2.06 0.31 2.16 3.35 2.11 2.03 9.0 5.16 2.42 4.42 2.46 2.67 2.29 5.05 2.27 5.14 3.3.25 3.06 3.05 5.13 5.1.42 4.18 2.4.69 4.69 2.07 0.31 2.16 3.35 2.09 2.02 9.0 5.14 2.39 0.08 2.46 2.68 REC 2.42 2.08 5.29 5.0 1.7 0.0.5 2.47 2.29 2.27 2.27 3.05 2.28 2.28 0.11 2.28 MODE PIN NO. 0 0.71 0.71 0.71 5.1.95 1.95 1.95 1.2.2.29 2.55 2.46 2.47 1.59 2.7 2.02 1.06 1.5.13 0.EE 4.17 2.35 3.18 1.1.97 2.34 1.97 5.24 2.25 2.02 2.37 2.94 1.42 1.72 0.09 1.1.0. 4.79 4.75 5.27 0.01 5.13 2.95 1.55 1.85 0.11 1.1.0.44 4.91 4.81 2.5.11 1.98 2.63 2.63 0.77 1.59 3.39 1.91 1.06 1.1.47 2.0 0.72 0.72 0.72 0.72 5.1.93 1.93 1.93 1.2.29 2.29 2.29 0. 1.0.4 4.81 4.79 2.69 0.01 5.09 2.21 2.53 2.45 2.45 1.49 2.69 2.52 4.72 1.1.51 1.75 1.36 2.03 0.7 0.7 0.7 0.7 5.0.73 0.72 0.72 4.2.4 2.4 2.53 PB 4.17 2.37 3.18 1.1.97 2.35 1.99 5.24 2.31 2.14 REC 4.17 2.33 3.18 1.1.97 2.35 1.99 5.24 2.29 1.99 2.4 2.93 1.38 2.05 0.54 MODE PIN NO. EE PB REC MODE PIN NO. 2.57 3.04 2.1 2.57 2.57 2.58 2.55 2.31 5.016 1.9 1.89 2.49 0.4 0.56 1.98 2.31 5.11 2.0 0.01 2.8 5.28 2.54 5.28 5.27 0.05 1.9 0.18 0.3 5.28 5.29 4.94 4.88 2.4.88 5.0 5.0.04 5.5.0.02 5.5.27 0.18 0.43 5.28 5.28 4.94 4.87 2.4.87 5.109 EE 5.27 5.0 4.91 4.91 5.17 5.17 2.84 5.14 0.01 5.1 0.83 0.01 0.01 5.29 5.29 0.03 5.1.49 1.3 5.27 2.5.29 3.25 5.2.0.0 0.0 5.0.01 0.0.12 0.0 0.05 PB 5.29 5.0 4.92 4.91 5.18 5.19 2.83 5.14 0.01 5.11 0.83 5.3 5.3 5.0.03 5.1.5 1.4 5.27 2.2.58 3.25 5.28 2.7 2.77 3.55 2.68 3.0 5.0 0.0 5.26 2.0.1.39 1.39 2.7 2.64 2.75 2.78 0.0 0.0 5.0 0.1.39 1.5.12 2.74 2.77 0.05 REC 0.08 5.0 4.79 4.79 5.18 5.18 2.86 5.15 0.02 5.11 0.89 5.3 5.3 5.3 0.01 0.04 5.1.5 1.21 5.27 2.2.58 3.25 5.28 2.69 2.77 3.55 2.86 3.MODE PIN NO. 112 EE 0 4.2 5.0 5.01 5.5.29 5.5.28 5.4.5.01 5.5.28 5.0 0.0.01 1.56 0.99 5.28 2.84 2.92 2.91 2.82 2.8 2.8 2.79 2.78 2.79 2.79 2.77 2.76 2.71 2.49 2.48 2.64 2.64 1.48 2.63 PB 0 0.4 5.0 4.95 4.5.29 5.5.28 5.4.4.94 4.5.28 5.0 0.0 1.56 0.99 5.29 2.91 2.91 2.9 2.81 2.86 2.86 2.85 2.85 2.84 2.84 2.83 2.82 2.75 2.51 2.51 2.67 2.68 2.57 2.67 2.2.31 2.36 2.31 1.56 1.39 5.28 2.7 2.81 2.81 2.68 2.67 2.66 2.65 2.65 2.66 2.66 2.65 2.64 2.59 2.33 2.32 2.49 2.5 2.32 2.5 REC 0 0.4 5.0 4.79 4.5.28 5.5.28 5.4.4.79 4.0.MODE PIN NO. 44 2.34 0.03 0.03 12.6 3.35 3.29 3.29 3.5.2 2.27 4.96 5.05 2.8 5.14 1.51 1.2.47 2.47 0.5.16 4.91 4.9 2.58 2.58 2.41 0.53 0.54 5.0.53 5.0 0.0 2.41 0.02 0.04 12.5 3.31 3.3 3.3 3.5.2 2.29 4.98 5.06 2.79 5.15 1.51 1.2.48 2.48 0.5.16 4.86 4.8 0.51 0.5 0.51 0.53 0.51 5.0.51 5.16 0.02 0.0.05 0.0 1.38 -0.07 -0.06 12.57 2.89 2.9 2.9 3.42 0.01 5.21 2.5 4.91 4.97 2.69 5.15 1.51 1.2.48 2.48 0.46 0.45 0.5.16 4.79 4.79 0.0.0.58 5.0 5.0 2.8 EE 2.6 2.57 2.66 2.63 2.5 2.52 2.36 0.01 2.51 2.6 PB 2.63 2.59 2.86 2.64 2.5 2.53 2.2.47 2.57 REC 2.5 2.47 2.55 2.51 2.39 2.4 2.2.41 2.46

SPECIFICATION GDZJ6.2C 26MM TP GRANDE DOUZ-5.6BSB 26MM TP PYUNG CHANG UZ-5.6BSB 26MM TP PYUNG CHANG MTZ13A TP ROHM-K MTZ13A TP ROHM-K PCX2 275V 0.1UF,M (PILKO) 435D SUNIL ELECTRONICS 0.1UF/2 PCX2 275V 0.1UF,M (PILKO) 435D SUNIL ELECTRONICS 0.1UF/2 47UF SHL,SD 400V M FL BK7.5 0.01UF D 630V K PE NI TP HIGH-VOL 100P/1KV SMPS SAMHWA 10M SRA 50V M FM5 TP(5) 3300 PF 400V M E R(NK,AD,SD) 100 PF 400V K B R (NK,AD,SD) 0.047UF S 50V J PE TP CE 47UF/50V KME (SMPS) 1000UF KME 16V M FM5 BULK CE 1000UF/10V SHL(10*12.5)T/P 470UF KME TYPE 25V M FM5 BULK 220UF SHL,SD 25V 20% FL TP 5 0.022UF 50V Z F TA26 S 470P 50V K B TA26 10M SRA 16V M FM5 TP(5) 10M SRA 16V M FM5 TP(5) 0.01M 16V M Y TA26 0.01M 16V M Y TA26 1.0M SRA/SS50V M FM5 TP(5) 1.0M SRA/SS50V M FM5 TP(5) 0.1UF D 50V 80%,-20% F(Y5V) TA 0.01M 16V M Y TA26 0.47M SRA 50V M FM5 TP(5) 0.01M 16V M Y TA26 0.01M 16V M Y TA26 0.47M SRA 50V M FM5 TP(5) 2200P 16V M X TA26 2200P 16V M X TA26 2.2UF SRA,SS 50V 20% FM5 TP 5 0.01M 16V M Y TA26 47M SRA/SS 16V M FM5 TP(5) 0.01M 16V M Y TA26 4.7UF SRA,SS 50V 20% FM5 TP 5 22M SRA 16V M FM5 TP(5) 1200P 16V M X TA26 47M SRA/SS 16V M FM5 TP(5) 0.01M 16V M Y TA26 1200P 16V M X TA26 1.0M SRA/SS50V M FM5 TP(5) 0.015UF S 50V J PE TP 120P 50V K B TA26 0.01UF S 50V J PE TP 47UF SR,SV 50V M FL TP 5 0.01M 16V M Y TA26 0.022UF S 63V K PP NI TP5 22M SRA 16V M FM5 TP(5) 2.2UF SRE,SE 50V 20% FM5 BP(D) 10M SRA 16V M FM5 TP(5) 8200P 16V M X TA26 1.0M SRA/SS50V M FM5 TP(5) 0.01UF S 50V J PE TP 1.0M SRA/SS50V M FM5 TP(5) 68P 50V J SL TA26 10M SRA 16V M FM5 TP(5) 10M SRA 16V M FM5 TP(5) 4.7UF SRA,SS 50V 20% FM5 TP 5 10M SRA 16V M FM5 TP(5) 0.01M 16V M Y TA26 1.0M SRA/SS50V M FM5 TP(5) 0.01M 16V M Y TA26 0.01M 16V M Y TA26 0.1UF D 50V 80%,-20% F(Y5V) TA 10M SRA 16V M FM5 TP(5) 47M SRA/SS 16V M FM5 TP(5) 0.047UF D 50V 80%,-20% F(Y5V) 0.01M 16V M Y TA26 47M SRA/SS 16V M FM5 TP(5) 1.0M SRA/SS50V M FM5 TP(5) 0.047UF D 50V 80%,-20% F(Y5V) 1.0M SRA/SS50V M FM5 TP(5) 0.047UF D 50V 80%,-20% F(Y5V) 0.022UF 50V Z F TA26 S 0.1UF D 50V 80%,-20% F(Y5V) TA 0.047UF D 50V 80%,-20% F(Y5V)
ABCDEFGHI JKLMN ABCDEFGHI JKLMN CDEF H MN CDEF H MN CDEF H MN CDEF H MN ABCDEFGHI J KLMN ABCDEFGHI J KLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN

MAIN BOARD ASSEMBLY <03>
PBM00 PBM00 PBM00 PBM00 PBM00 PBM00 PBM00 PBM00 PBM00 PBM00 IC101 ! IC102 IC103 IC201 IC301 IC501 IC501 IC503 IC504 IC505 IC751 IC7V1 IC801 IC901 Q151 Q152 Q154 Q155 Q157 Q162 Q163 Q164 Q165 Q166 Q301 Q302 Q303 Q304 Q305 Q306 Q307 Q308 Q309 Q501 Q502 Q503 Q504 Q514 Q515 Q5P2 Q5P3 Q5P4 Q5P5 Q5S1 Q7S1 Q901 Q902 Q903 Q906 ! BD101 D102 D103 D104 D105 D106 D109 D155 D156 D159 D160 D301 D502 D509 D901 D902 D903 D904 ZD151 LG-6871R-5739A PWB(PCB) ASSEMBLY,TOTAL LG-6871R-5739B PWB(PCB) ASSEMBLY,TOTAL LG-6871R-5739C PWB(PCB) ASSEMBLY,TOTAL LG-6871R-5739D PWB(PCB) ASSEMBLY,TOTAL LG-6871R-5739E PWB(PCB) ASSEMBLY,TOTAL LG-6871R-5739F PWB(PCB) ASSEMBLY,TOTAL LG-6871R-5739G PWB(PCB) ASSEMBLY,TOTAL LG-6871R-5739H PWB(PCB) ASSEMBLY,TOTAL LG-6871R-5739J PWB(PCB) ASSEMBLY,TOTAL LG-6871R-5739K PWB(PCB) ASSEMBLY,TOTAL STR-A6351 IC,POWER MANAGEMENT LTV-817B SENSOR LG-0IKE431000A IC,KEC LG-0ILNRSA007A IC,LINEAR LG-0ILNRSA005A IC,LINEAR LG-0IMCRHI014B IC,MICRO CONTROLLER LG-0IMCRHI019A IC,MICRO CONTROLLER LG-0IAL241600B IC,ATMEL LG-0IKE703100A IC,KEC LG-0IKE704200B IC,KEC LG-0IIT341700B IC,ITT LG-0ILNRMN001A IC,LINEAR LG-0IPH960500A IC,PHILIPS MM1443XJ IC,MITSUMI LG-0TR127309AA TRANSISTOR LG-0TR127309AA TRANSISTOR LG-0TR126809BA TRANSISTOR,BIPOLARS LG-0TR320509AB TRANSISTOR LG-0TR120309AE TRANSISTOR LG-0TR534309BA TRANSISTOR LG-0TR120109AC TRANSISTOR LG-0TR120309AE TRANSISTOR LG-0TR220309AF TRANSISTOR LG-0TR127309AA TRANSISTOR LG-0TR534309BA TRANSISTOR LG-0TR198009CA TRANSISTOR LG-0TR534309BA TRANSISTOR LG-0TR534309BA TRANSISTOR LG-0TR198009CA TRANSISTOR LG-0TR534409AA TRANSISTOR LG-0TR198009CA TRANSISTOR LG-0TR198009CA TRANSISTOR LG-0TR198009CA TRANSISTOR LG-0TR534309BA TRANSISTOR LG-0TR534309BA TRANSISTOR LG-0TR127309AA TRANSISTOR LG-0TR534309BA TRANSISTOR LG-0TR120309AE TRANSISTOR LG-0TR120309AE TRANSISTOR LG-0TR120309AE TRANSISTOR LG-0TR120309AE TRANSISTOR LG-0TR120309AE TRANSISTOR LG-0TR120309AE TRANSISTOR LG-0TR534309BA TRANSISTOR LG-0TR534309BA TRANSISTOR LG-0TR120309AE TRANSISTOR LG-0TR220309AF TRANSISTOR LG-0TR120309AE TRANSISTOR LG-0TR534309BA TRANSISTOR S1WBA60 DIODE EG01CW DIODE,RECTIFIER LG-0DR180209AA DIODE,RECTIFIER 1SS133DIODE,SWITCHING LG-0DR104009BA DIODE,RECTIFIER 1N5822DIODE,RECTIFIER LG-0DR202000AB DIODE,RECTIFIER LG-0DR104009AB DIODE,RECTIFIER 1SS133 DIODE,SWITCHING 1SS133 DIODE,SWITCHING 1SS133 DIODE,SWITCHING 1SS133 DIODE,SWITCHING 1SS133 DIODE,SWITCHING 1SS133 DIODE,SWITCHING 1SS133 DIODE,SWITCHING 1SS133 DIODE,SWITCHING 1SS133 DIODE,SWITCHING 1SS133 DIODE,SWITCHING MTZ13CT-77 DIODE,ZENERS EDJ209P (PCB ASSY) EDJ200P (PCB ASSY) EDJ904NS (PCB ASSY) EDJ900NP (PCB ASSY) EDJ909NP (PCB ASSY) EC(D) SERIES (PCB ASSY) EDJ SERIES (HIFI) EDJ904NI (HIFI) EDJ SERIES (MONO) EDJ203I (MONO) STR-A6351 SANKEN 8 DIP ST SMPS LTV-817B,PHOTO COUPLER(LITEON) KIAPIN TP LA70100M SANYO 30 SOP ST SECAM LA71750AM SANYO 100 QFP TRAY A HD6432197SA06F HITACHI 112 QFP HD6432197SA09F HITACHI 112P QF AT24C16 - - - KIA7031P 3P 3.1V RESET(TAPING) KIA7042P 3P 4.2V RESET(TAPING) MSP3417D-QG QFP44 BK NICAM+A2 SDA5650 MICRONAS 14 DIP ST VPS TDA9605H QFP44 BK HIFI AMP+HIF MM1443XJ SSOP-34 TP CANAL S/W KTA1273-TP-Y (KTA966A)KEC KTA1273-TP-Y (KTA966A)KEC KTA1268-BL TP KEC KTC3205-TP-Y (KTC2236A)KEC SRC1203 TP AUK TO92 22K,22K 2SC5343-L TP AUK TO92 SRC1201 TP AUK TO92 4.7K,4.7K SRC1203 TP AUK TO92 22K,22K SRA2203 TP AUK TO92 22K,22K KTA1273-TP-Y (KTA966A)KEC 2SC5343-L TP AUK TO92 2SA1980G TP AUK TO92 2SC5343-L TP AUK TO92 2SC5343-L TP AUK TO92 2SA1980G TP AUK TO92 2SC5344Y TP 2SA1980G TP AUK TO92 2SA1980G TP AUK TO92 2SA1980G TP AUK TO92 2SC5343-L TP AUK TO92 2SC5343-L TP AUK TO92 KTA1273-TP-Y (KTA966A)KEC 2SC5343-L TP AUK TO92 SRC1203 TP AUK TO92 22K,22K SRC1203 TP AUK TO92 22K,22K SRC1203 TP AUK TO92 22K,22K SRC1203 TP AUK TO92 22K,22K SRC1203 TP AUK TO92 22K,22K SRC1203 TP AUK TO92 22K,22K 2SC5343-L TP AUK TO92 2SC5343-L TP AUK TO92 SRC1203 TP AUK TO92 22K,22K SRA2203 TP AUK TO92 22K,22K SRC1203 TP AUK TO92 22K,22K 2SC5343-L TP AUK TO92 S1WBA60(1A 600V) SHIDENKEN EG01CW(R-FORM 5MM) TP SANKEN ERA18-02KFRB TP FUJI DO204AL 2 1SS133 DETECT,SW TP RL104F TP RECTRON NON 400V 1A 1N5822 BK RECTRON DO201AD 40V HER202 BK RECTRON NON 100V 2A RL104 R. TP GULF SEMICONDUCTOR 1SS133 DETECT,SW TP 1SS133 DETECT,SW TP 1SS133 DETECT,SW TP 1SS133 DETECT,SW TP 1SS133 DETECT,SW TP 1SS133 DETECT,SW TP 1SS133 DETECT,SW TP 1SS133 DETECT,SW TP 1SS133 DETECT,SW TP 1SS133 DETECT,SW TP MTZ13C TP ROHM-K B A F C DE G MN H KL I ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN FG ABCDEFGHI JKLMN ABCDEFGHI JKLMN KLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN CDEF H MN B DE J CDEF H MN B G J ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN B DEFGH J ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN FG ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN H ABCDEFGHI JKLMN ! ! J ! ! ! !

# REF No. C917 C920 C921 C952 C956 C957 C960 C961 C962 C963 C9A1 C9A2 C9A3 C9A4 C9A5 C9A6 C9A7 C9A8 R101 R102 R103 R104 R105 R106 R109 R112 R116 R117 R118 R119 R120 R125 R126 R151 R152 R153 R154 R155 R157 R158 R159 R161 R170 R172 R173 R201 R202 R204 R301 R303 R304 R305 R306 R307 R308 R309 R310 R311 R312 R313 R314 R315 R316 R317 R318 R319 R320 R321 R322 R323 R324 R325 R326 R327 R328 R329 R330 R331 R334 R335 R336 R337 R338
PART No. LG-0CX2700K408 LG-0CN1040K948 LG-0CN1040K948 LG-0CN1040K948 QET41HM-105 LG-0CX2700K408 LG-0CN1040K948 LG-0CN1040K948 QET41CM-106 QET41CM-106 QET41HM-105 QET41HM-105 QET41HM-105 LG-0CN1040K948 QET41CM-106 QET41CM-106 QET41CM-106 QET41CM-106 LG-614-007A QRD161J-184Y QRD161J-680Y LG-0RS5602K619 LG-0RF0101A619 QRD161J-184Y LG-0RS0350K619 QRD161J-104Y QRD161J-221Y QRD161J-222Y QRD161J-102Y LG-0RN3301F408 LG-0RN3001F408 QRD161J-472Y QRD161J-681Y QRD161J-102Y QRD161J-561Y QRD161J-102Y QRD161J-331Y QRD161J-332Y QRD161J-102Y QRD161J-183Y QRD161J-471Y QRD161J-472Y QRD161J-562Y QRD161J-271Y QRD161J-271Y QRD161J-102Y QRD161J-124Y QRD161J-473Y QRD161J-563Y QRD161J-183Y QRD161J-103Y QRD161J-103Y QRD161J-223Y QRD161J-222Y QRD161J-472Y QRD161J-102Y QRD161J-472Y QRD161J-102Y QRD161J-683Y QRD161J-2R2 QRD161J-102Y QRD161J-470Y QRD161J-101Y QRD161J-562Y QRD161J-392Y QRD161J-561Y QRD161J-151Y QRD161J-122Y QRD161J-102Y QRD161J-103Y QRD161J-334Y QRD161J-471Y QRD161J-123Y QRD161J-562Y QRD161J-271Y QRD161J-123Y QRD161J-103Y QRD161J-472Y QRD161J-272Y QRD161J-682Y QRD161J-104Y QRD161J-222Y QRD161J-271Y
PART NAME, DESCRIPTION CAPACITOR TUBULA(T.C) CAPACITOR,FIXED TUBULAR(High d CAPACITOR,FIXED TUBULAR(High d CAPACITOR,FIXED TUBULAR(High d CAPACITOR,ELECTROLYTIC CAPACITOR TUBULA(T.C) CAPACITOR,FIXED TUBULAR(High d CAPACITOR,FIXED TUBULAR(High d CAPACITOR,ELECTROLYTIC CAPACITOR,ELECTROLYTIC CAPACITOR,ELECTROLYTIC CAPACITOR,ELECTROLYTIC CAPACITOR,ELECTROLYTIC CAPACITOR,FIXED TUBULAR(High d CAPACITOR,ELECTROLYTIC CAPACITOR,ELECTROLYTIC CAPACITOR,ELECTROLYTIC CAPACITOR,ELECTROLYTIC RESISTOR RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED METAL OXIDE FIL RESISTOR,DRAWING RESISTOR,FIXED CARBON FILM RESISTOR,FIXED METAL OXIDE FIL RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED METAL FILM RESISTOR,FIXED METAL FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM RESISTOR,FIXED CARBON FILM

ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN FG ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDE H I JKLMN CDEF H MN CDEF H MN B DE J CDEF H MN CDEF H MN CDEF H MN CDEF H MN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN B DEFGH J B DEFGH J B DEFGH J B DEFGH J ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN CDEF H MN B DEFG J AC I KLMN H ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN CDEF H MN AB G I JKL ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN FG AB J CDE H I KLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN ABCDEFGHI JKLMN CDEF H MN
! L102 LG-616-145H L103 LG-633-088G L104 LG-633-088G L106 LG-636-004C L201 LG-0LR1000K035 L301 LG-0LR0102J0N5 L302 LG-0LR1000K035 L303 LG-0LR0102J0N5 L304 LG-0LR0102J0N5 L305 LG-0LR1000K035 L307 LG-0LR0102J0N5 L501 LG-0LA0122K018 L503 LG-0LR1000K035 L504 LG-0LR0102J0N5 L505 LG-0LR1000K035 L506 LG-635-027C L5G2 LG-0LR3300K035 L5S1 LG-0LA0332K018 L702 LG-0LR1000K035 L703 LG-0LR1000K035 L704 LG-0LA0821K018 L705 LG-0LR1000K035 L751 LG-0LR0102J0N5 L753 LG-0LR0102J0N5 L7V1 LG-0LR1000K035 L801 LG-0LR0102J0N5 L802 LG-0LR0102J0N5 L8R1 LG-0LA1000K018 L8R2 LG-0LA1000K018 L901 LG-0LA1000K018 L902 LG-0LA1000K018 L904 LG-0LA1000K018 L905 LG-636-004C L906 LG-0LA1000K018 L907 LG-636-004C L911 LG-0LA1000K018 L912 LG-0LA1000K018 L914 LG-0LA1000K018 L915 LG-0LA1000K018 CS501 LG-6600M000002 ES501 LG-4931R-0050C ES502 LG-4931R-0050C ! F101 LG-585-011T ! FH01 LG-586-008B ! FH02 LG-586-008B JK801 LG-6612R-C002C JK901 LG-6620RM0002J JK901 LG-6620RM0002K JK901 LG-6620RM0002L LD501 LG-4931R-0017C LED502 LG-6301R2U001F MS501 LG-6600JB8005B P3D01 LG-561-234S P3D01 LG-561-234Z P3D02 LG-6630R5S010A P3D03 LG-561-251B PMC01 LG-6630R-BE01L ! PW101 LG-561-292B RC501 LG-6712R1940GA RS501 LG-6500RAB003A RS502 LG-6500RAB003A SW5T1 LG-556-213C SW5T10 LG-556-213C SW5T11 LG-556-213C SW5T12 LG-556-213C SW5T13 LG-556-213C SW5T3 LG-556-213C SW5T4 LG-556-213C SW5T5 LG-556-213C SW5T6 LG-556-213C ! T101 LG-642-015G TU701 LG-6700PFPL03A TU701 LG-6700PFPL03B TU701 LG-6700PFPL03E X301 LG-6202R2443AC X501 LG-6212AA2100C X502 LG-6202R-DA01A X751 LG-529-021Q
FILTER(CIRC) SHT LFS2020V4-04350 COIL,CHOKE CHOCK(22MH) 5MM TOKO TP COIL,CHOKE CHOCK(22MH) 5MM TOKO TP COIL BEAD CORE BFS3550R2FD8,R T/P INDUCTOR RADIAL LEAD 100M K 6X6 L5 TP INDUCTOR,RADIAL LEAD 10UH 5% TP 3X5 TR5 INDUCTOR RADIAL LEAD 100M K 6X6 L5 TP INDUCTOR,RADIAL LEAD 10UH 5% TP 3X5 TR5 INDUCTOR,RADIAL LEAD 10UH 5% TP 3X5 TR5 INDUCTOR RADIAL LEAD 100M K 6X6 L5 TP INDUCTOR,RADIAL LEAD 10UH 5% TP 3X5 TR5 INDUCTOR AXIAL LEAD 12M K 2.3X3.4 L5 TP INDUCTOR RADIAL LEAD 100M K 6X6 L5 TP INDUCTOR,RADIAL LEAD 10UH 5% TP 3X5 TR5 INDUCTOR RADIAL LEAD 100M K 6X6 L5 TP INDUCTOR,RADIAL LEAD EL0405RA SKI150G-3 K-TDK 15UH INDUCTOR RADIAL LEAD 330M K 6X6 L5 TP INDUCTOR AXIAL LEAD 33M K 2.3X3.4 L5 TP INDUCTOR RADIAL LEAD 100M K 6X6 L5 TP INDUCTOR RADIAL LEAD 100M K 6X6 L5 TP INDUCTOR AXIAL LEAD 8.2M K 2.3X3.4 L5 TP INDUCTOR RADIAL LEAD 100M K 6X6 L5 TP INDUCTOR,RADIAL LEAD 10UH 5% TP 3X5 TR5 INDUCTOR,RADIAL LEAD 10UH 5% TP 3X5 TR5 INDUCTOR RADIAL LEAD 100M K 6X6 L5 TP INDUCTOR,RADIAL LEAD 10UH 5% TP 3X5 TR5 INDUCTOR,RADIAL LEAD 10UH 5% TP 3X5 TR5 INDUCTOR AXIAL LEAD 100M K 2.3X3.4 L5 TP INDUCTOR AXIAL LEAD 100M K 2.3X3.4 L5 TP INDUCTOR AXIAL LEAD 100M K 2.3X3.4 L5 TP INDUCTOR AXIAL LEAD 100M K 2.3X3.4 L5 TP INDUCTOR AXIAL LEAD 100M K 2.3X3.4 L5 TP COIL BEAD CORE BFS3550R2FD8,R T/P INDUCTOR AXIAL LEAD 100M K 2.3X3.4 L5 TP COIL BEAD CORE BFS3550R2FD8,R T/P INDUCTOR AXIAL LEAD 100M K 2.3X3.4 L5 TP INDUCTOR AXIAL LEAD 100M K 2.3X3.4 L5 TP INDUCTOR AXIAL LEAD 100M K 2.3X3.4 L5 TP INDUCTOR AXIAL LEAD 100M K 2.3X3.4 L5 TP SWITCH,PUSH MPU11810MLB0 MIC DC 5V 1MA D-3 HOLDER ASSEMBLY END (DI) HOLDER ASSEMBLY END (DI) FUSE,SLOW BLOW 1600MA 250 V 5.2X20 CY/GL SEMK HOLDER FUSE CLIP TP SINSUNG HOLDER FUSE CLIP TP SINSUNG JACK,RCA RCA-208C-06 YUQIU WH-RD JACK,SCART DSAM-0121 DOOWON 2F-21P(BL-BK) JACK,SCART DSAM-0120 DOOWON 1F-21P (BK) JACK,SCART DSAM-0139 DOOWON 2F-21P(BK-BK) HOLDER ASSY LED(DI-CKD)LOCAL LED ASSEMBLY TOH-30M-G3R1 OASIS UNIVERSAL 4 SWITCH,MODE NON 5V 1MA VERTICAL -G CONNECTOR(CIRC),DRAWING GF120-9S-TS-A LG CABLE 9P 1.25 CONNECTOR (CIRC) GF120-3S-TS-A LGC 3PIN 1.25MM CONNECTOR (CIRC) GF105-06S-TS LG CABLE 6PIN 2MM CONNECTOR(CIRC),DRAWING GB201-2P-TS-B(LGC) CONNECTOR (CIRC),BOARD TO BOARJE612-12 JAE EUN 12P 2.0MM CONNECTOR GP390 LGC 3P 3.96 STRAIGHT SN REMOTE CONTROLLER RECEIVER TSOP2840WE1 VISHAY(TEMIC) 40KH SENSOR SG-260 KODENSHI D33 REEL SENSO SENSOR SG-260 KODENSHI D33 REEL SENSO SWITCH,DETECTOR THVV951BAA POSTECH DC 12 V 5-0 SWITCH,DETECTOR THVV951BAA POSTECH DC 12 V 5-0 SWITCH,DETECTOR THVV951BAA POSTECH DC 12 V 5-0 SWITCH,DETECTOR THVV951BAA POSTECH DC 12 V 5-0 SWITCH,DETECTOR THVV951BAA POSTECH DC 12 V 5-0 SWITCH,DETECTOR THVV951BAA POSTECH DC 12 V 5-0 SWITCH,DETECTOR THVV951BAA POSTECH DC 12 V 5-0 SWITCH,DETECTOR THVV951BAA POSTECH DC 12 V 5-0 SWITCH,DETECTOR THVV951BAA POSTECH DC 12 V 5-0 TRANSFORMER,SMPS SJE-015G/SHT-015G SJ/SH/CS/LSE TUNER SECAM TADC-S301D LG PAL FS Y2K TUNER B/G TADC-G301D LG PAL FS Y2K2 TUNER G/K/I TADC-M301D LG PAL FS Y2 RESONATOR,CRYSTAL HC49U BUBANG 4-433709MHZ 15 RESONATOR,CRYSTAL HC-49S BUBANG 10MHZ +/- 30 PPM RESONATOR,CRYSTAL CFS-308 CITIZEN 32-768KHZ RESONATOR,CRYSTAL 49U BUBANG 18432000HZ 30PPM 16