Reviews & Opinions
Independent and trusted. Read before buy JVC KD-BT11!

JVC KD-BT11

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
JVC KD-BT11 - Installation Car Audio, size: 9.6 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

JVC KD-BT11JVC KD BT11 Radio / CD / MP3 player

In-dash unit, Full-DIN, 50 Watts x 4, Stereo

The KD-BT11 is a CD receiver that features built-in Bluetooth wireless technology for hands-free calling and audio streaming, and is updatable for pairing with new cell phones. The unit is equipped for readiness with CD changer, HD radio, Satellite radio, and is MP3/WMA compatible. The KD-BT11 also features a 3-Band Parametric iEQ, MOS-FET 50W x 4, variable color display, and front AUX Input.

 

[ Report abuse or wrong photo | Share your JVC KD-BT11 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
Bamapride 11:04am on Saturday, October 30th, 2010 
Upgrade, this is not the best unit Watch Video Here: http://www.amazon.com/review/R2RG6R192SZGQC Ok, so I am a JVC nut.
topmaverick 10:52am on Sunday, April 4th, 2010 
excellent value from a household name I purchased this as a gift for my Son as it appeared tremendous value for money.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

*1 Al poner la unidad vertical, tenga cuidado de no daar el fusible provisto en la parte posterior. *2 No suministrado con esta unidad.

TROUBLESHOOTING

* * * * * * * * * The fuse blows. Are the red and black leads connected correctly? Power cannot be turned on. Is the yellow lead connected? No sound from the speakers. Is the speaker output lead short-circuited? Sound is distorted. Is the speaker output lead grounded? Are the terminals of L and R speakers grounded in common? Noise interfere with sounds. Is the rear ground terminal connected to the cars chassis using shorter and thicker cords? This unit becomes hot. Is the speaker output lead grounded? Are the terminals of L and R speakers grounded in common? This unit does not work at all. Have you reset your unit? * * * * * * * * *

LOCALIZACION DE AVERIAS

El fusible se quema. Estn los conductores rojo y negro correctamente conectados? No es posible conectar la alimentacin. Est el cable amarillo conectado? No sale sonido de los altavoces. Est el cable de salida del altavoz cortocircuitado? El sonido presenta distorsin. Est el cable de salida del altavoz conectado a masa? Estn los terminales de los altavoces L y R conectados a una masa comn? Perturbacin de ruido. El terminal de tierra trasero est conectado al chasis del automvil utilizando los cordones ms corto y ms grueso? Esta unidad se calienta. Est el cable de salida del altavoz conectado a masa? Estn los terminales de los altavoces L y R conectados a una masa comn? Esta unidad no funciona en absoluto. Reinicializ la unidad? 2 * * * * * * * * *

EN CAS DE DIFFICULTES

Le fusible saute. Les fils rouge et noir sont-ils racords correctement? Lappareil ne peut pas tre mise sous tension. Le fil jaune est-elle raccorde? Pas de son des enceintes. Le fil de sortie denceinte est-il court-circuit? Le son est dform. Le fil de sortie denceinte est-il la masse? Les bornes des enceintes gauche et droit sont-elles mises ensemble la masse? Interfrence avec les sons. La prise arrire de mise la terre est-elle connecte au chssis de la voiture avec un cordon court et pais? Cet appareil devient chaud. Le fil de sortie denceinte est-il la masse? Les bornes des enceintes gauche et droit sont-elles mises ensemble la masse? Cet appareil ne fonctionne pas du tout. Avez-vous rinitialis votre appareil?
Install1-2 KD-BT11[J]f.indd 2

11/30/07 2:21:15 PM

ELECTRICAL CONNECTIONS
Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color. 1 Connect the colored leads of the power cord in the order specified in the illustration below. 2 Connect the antenna cord. 3 Finally connect the wiring harness to the unit.

CONEXIONES ELECTRICAS

White with black stripe Blanco con rayas negras Blanc avec bande noire

White Blanco Blanc

Gray with black stripe Gris con rayas negras Gris avec bande noire

Gray Gris Gris

Left speaker (front) Altavoz izquierdo (frontal) Enceinte gauche (avant)
Right speaker (front) Altavoz derecho (frontal) Enceinte droit (avant)
Left speaker (rear) Altavoz izquierdo (trasero) Enceinte gauche (arrire)
Connecting the external amplifiers or subwoofer / Conexin de los amplificadores o subwoofer externos / Connexion damplificateurs extrieurs ou dun caisson de grave
Usted podr conectar amplificadores para mejorar el sistema estreo de su automvil. Conecte el conductor remoto (azul con rayas blancas) al conductor remoto del otro equipo para poderlo controlar a travs de esta unidad. Desconecte los altavoces de esta unidad y conctelos al amplificador. Los cables de los altavoces de esta unidad quedan sin usar. Vous pouvez connecter des amplificateurs pour amliorer votre systme autoradio. Connectez le fil de commande distance (bleu avec bande blanche) au fil de commande distance de lautre appareil de faon quil puisse tre command via cet appareil. Dconnectez les enceintes de cet appareil et connectez-les lamplificateur. Laissez les fils denceintes de cet appareil inutiliss.
Y-connector (not supplied for this unit) Conector en Y (no suministrado con esta unidad) Connecteur Y (non fourni avec cet appareil)
You can connect amplifiers to upgrade your car stereo system. Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit. Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker leads of this unit unused.
Set L/O MODE to REAR (See page 24 of the INSTRUCTIONS.) Ajuste L/O MODE a REAR (Consulte la pgina 24 del MANUAL DE INSTRUCCIONES.) Rglez L/O MODE sur REAR (Voir page 24 du MANUEL DINSTRUCTIONS.)
Rear speakers Altavoces posteriores Enceintes arrire

Remote lead (blue with white stripe) Cable remoto (azul con rayas blancas) Fil dalimentation distance (bleu avec bande blanche) To the remote lead of other equipment or automatic antenna if any Al conductor remoto de otro equipo o de la antena automtica, si hubiere Au fil de tlcommande de lautre appareil ou lantenne automatique sil y en a une Front speakers Altavoces delanteros Enceintes avant
JVC Amplifier Amplificador de JVC JVC Amplificateur
Signal cord *1 Cable de seal *1 Cordon de signal *1
Set L/O MODE to SUB.W (See page 24 of the INSTRUCTIONS.) Ajuste L/O MODE a SUB.W (Consulte la pgina 24 del MANUAL DE INSTRUCCIONES.) Rglez L/O MODE sur SUB.W (Voir page 24 du MANUEL DINSTRUCTIONS.)
Subwoofer Subwoofer Caisson de grave

or / o / ou

*1 Not supplied for this unit. *2 Before checking the operation of this unit prior to installation, this lead
must be connected; otherwise, the power cannot be turned on.
*1 No suministrado con esta unidad. *2 Antes de comprobar el funcionamiento de esta unidad previa a de la *3 *4
instalacin, es necesario conectar este cable, de lo contrario no se podr conectar la alimentacin. Cable remoto Fije firmemente el cable de tierra a la carrocera metlica o al chasisa un lugar no cubierto con pintura (si est cubierto con pintura, qutela antes de fijar el cable). De lo contrario, se podran producir daos en la unidad.
*1 Non fourni avec cet appareil. *2 Pour vrifier le fonctionnement de cet appareil avant installation, ce fil
doit tre raccord, sinon lappareil ne peut pas tre mis sous tension.
*3 Remote lead *4 Firmly attach the ground wire to the metallic body or to the chassis of
the carto the place uncoated with paint (if coated with paint, remove the paint before attaching the wire). Failure to do so may cause damage to the unit.
*3 Fil dalimentation distance *4 Attachez solidement le fil de mise la masse au chssis mtallique de la
voiture un endroit qui nest pas recouvert de peinture (sil est recouvert de peinture, enlevez dabord la peinture avant dattacher le fil). Lappareil peut tre endommag si cela nest pas fait correctement.
Install3-4 KD-BT11[J]f.indd 3

doc1

11/30/07 3:11:17 PM
EN02-07_KD-BT11_003A_3.indd 4

Basic operations

Using the control panel

r Adjust the sound mode.

1 DAB: Select DAB service.
CD/CD-CH: Select folder. IPOD: Enter the main menu/Pause playback/ Confirm selection. Eject disc. Turn on the power. Turn off the power [Hold]. Attenuate the sound (if the power is on). Volume control [Turn]. FM/AM: Select the bands. BLUETOOTH (AUDIO): Start playback Loading slot Display window Activate/deactivate TA Standby Reception. Enter programme type searching mode [Hold]. Change the display information. Detach the panel. Enter Bluetooth menu Display the last called number [Hold]. FM/AM: Search for station. DAB: Search for DAB ensemble. CD/CD-CH/IPOD: Select track. BLUETOOTH (AUDIO): Reverse skip/Forward skip. Select the source. FM/AM = DAB = CD *1 = CD-CH *1/IPOD *1 (or EXT INPUT) = BLUETOOTH = AUX IN = (back to the beginning)
Enter the PSM settings [Hold].

t Enter functions mode.

Press M MODE, then one of the following buttons (within 5 seconds). EQ : Select the sound mode. MO : Turn on/off monaural reception. SSM : Automatic station presetting [Hold]. RPT : Select repeat play. RND : Select random play. 5/ : Skip 10 tracks. Activate Voice Dialing [Hold]. y FM/AM: Select preset station. DAB: Select preset DAB service. CD/CD-CH: Select folder/track/disc (for CD changer). BLUETOOTH (PHONE): Dial preset phone number *2. u AUX (auxiliary) input jack *1 You cannot select these sources if they are not ready or not connected. *2 For storing preset phone number, see page 14.
Continued on the next page

OPERATIONS

EN02-07_KD-BT11_003A_3.indd 5

11/30/07 3:11:18 PM

Display window
1 Status of Bluetooth device
7 Tuner reception indicatorsST (stereo),
(Device number, [1 5]; signal strength, [0 3]*; battery reminder, [0 3]*) * As the number increases, the signal/battery power becomes stronger. Tr (track) indicator Source display / Track number / Folder number / Time countdown indicator Bluetooth indicator RDS indicatorsAF, REG, TP, PTY Playback mode / item indicators RND (random), (disc), (folder), RPT (repeat)

MO (monaural)

8 LOUD (loudness) indicator 9 EQ (equalizer) indicator p Disc information indicators

PTY Standby Reception PTY Standby Reception allows the unit to switch temporarily to your favorite PTY programme from any source other than AM. To activate and select your favorite PTY code for PTY Standby Reception, see page 25. The PTY indicator either lights up or flashes. If the PTY indicator lights up, PTY Standby Reception is activated. If the PTY indicator flashes, PTY Standby Reception is not yet activated. To activate PTY Standby Reception, tune in to another station providing these signals. The PTY indicator will stop flashing and remain lit. To deactivate the PTY Standby Reception, select OFF for the PTY code (see page 25). The PTY indicator goes off.
Using the standby receptions
TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. The volume changes to the preset TA volume level if the current level is lower than the preset level (see page 25).
EN08-15_KD-BT11_003A_3.indd 8 11/30/07 3:11:33 PM
When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration below). When shipped from the factory, Network-Tracking Reception is activated. To change the Network-Tracking Reception setting, see AF-REG on page 25.
Programme A broadcasting on different frequency areas (01 05)
Usually when you press the number buttons, the preset station is tuned in. If the signals from the FM RDS preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency broadcasting the same programme as the original preset station is broadcasting. The unit takes some time to tune in to another station using programme search. See also page 25.

PTY codes

NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music), DOCUMENT

Disc operations

All tracks will be played repeatedly until you change the source or eject the disc.
To stop play and eject the disc
Press SRC to listen to another playback source.
Prohibiting disc ejection
To cancel the prohibition, repeat the same procedure.
EN08-15_KD-BT11_003A_3.indd 9

11/30/07 3:11:35 PM

Tracing the same programme Network-Tracking Reception
Automatic station selection Programme Search
Pressing (or holding) the following buttons allows you.
After pressing M MODE, press the following buttons. Skip 10 tracks MP3/WMA: Within the same folder TRACK RPT: Repeat current track FOLDER RPT: MP3: Repeat current folder FOLDER RND: MP3: Randomly play all tracks of current folder, then tracks of next folders ALL RND: Randomly play all tracks To cancel repeat play or random play, select RPT OFF or RND OFF.

[Press] Select track [Hold] Reverse/fast-forward track MP3: Select folder

(Number buttons) *1

Locate particular folder *2 (for MP3/WMA disc) or track directly
*1 Press to select number 1 to 6; hold to select number 7 to 12. *2 It is required that folders be assigned with 2-digit numbers at the beginning of their folder names01, 02, 03, and so on.
Using the Bluetooth devices

Features

You can operate Bluetooth devices through the unit as follows: Receiving a call Making a callfrom phonebook, from call history (dialed number/received call), by dialing number, by preset numbers, by voice command Informing you of the arrival of a text message Play back a Bluetooth audio player Refer also to the instructions supplied with the Bluetooth device.
Bluetooth is a short-range wireless radio communication technology for the mobile device such as mobile phones, portable PCs, and other devices. The Bluetooth devices can be connected without cables and communicate with each other. Refer to the list (included in the box) to see the countries where you may use the Bluetooth function.

Bluetooth profile

This unit supports the following Bluetooth profiles; HFP (Hands-Free Profile) 1.5 OPP (Object Push Profile) 1.1 A2DP (Advanced Audio Distribution Profile) 1.2 AVRCP (Audio/Video Remote Control Profile) 1.3
EN08-15_KD-BT11_003A_4.indd 10 12/4/07 5:02:15 PM

Pairing and PIN code

When you connect a Bluetooth device to the unit for the first time, make pairing between the unit and the device. Pairing allows Bluetooth devices to communicate with each other. To make pairing, you may need to enter the PIN (Personal Identification Number) code of your Bluetooth device you want to connect. Once the connection is established, it is registered in the unit even if you reset the unit. Up to five devices can be registered in total. Only one device for Bluetooth phone and one for Bluetooth audio can be connected at a time. To use the Bluetooth function, you need to turn on Bluetooth function of the device. Preparation: Operate the device to turn on its Bluetooth function.

2 Select a number.

3 Repeat steps 1 and 2 until you finish

entering a PIN code.

4 Confirm the entry.
While listening to a source.

Select DEVICE.

Select NEW PAIRING.
Operate the target Bluetooth device, (while WAIT PAIR is flashing on the display). On the device to be connected, enter the same PIN code you have just entered for this unit. PAIRING flashes, then PAIRING OK appears on the display when the connection is established. Now you can use the device through the unit.
The device remains registered even after you disconnect the device. Use CNNCT PHONE or CNNCT AUDIO (or activate AUTO CNNCT) to connect the same device from next time on. (See pages 12 and 27.)
EN08-15_KD-BT11_003A_3.indd 11

11/30/07 3:11:36 PM

Connecting a Bluetooth device for the first time
Enter a PIN (Personal Identification Number) code to the unit. You can enter any number you like (1-digit to 16-digit number). [Initial: 0000] * Some devices have their own PIN code. Enter the specified PIN code to the unit. 1 Move to the next (or previous) number position.
Deleting a registered device
Perform steps 1 and 2 on page 11, then. 1 Select DELETE PAIR.
Connecting a registered device (PHONE/ AUDIO)
Perform steps 1 and 2 on page 11, then. 1 Select CNNCT PHONE or CNNCT AUDIO.
2 Select a device you want to delete, then

select YES.

2 Select a device you want.
CONNECTING flashes, then CONNECTED appears on the display when the device is connected. You can set the unit to connect the Bluetooth device automatically when the unit is turned on. (See AUTO CNNCT on page 27.)
Disconnecting a device (PHONE/AUDIO)
Perform steps 1 and 2 on page 11, then. Select DISCN PHONE or DISCN AUDIO.
DISCONNECT appears on the display.
Using the Bluetooth cellular phone
Establish the connection with a device.

(see page 11.)

Enter Bluetooth menu. Select CALL, then make a call or settings using the SETTINGS menu.
(See the following and page 27.)
EN08-15_KD-BT11_003A_5.indd 12 12/7/07 3:35:27 PM

When a call comes in.

The source is automatically changed to BLUETOOTH, then RCV CALL (receive call) and the phone number appear alternately. When AUTO ANSWER is activated. The unit answers the incoming calls automatically, see page 27. When AUTO ANSWER is deactivated, press any button (except and 0) to answer the incoming call. You can adjust the microphone volume level (see page 27). To end the call Hold any button (except

Switching conversation media (the unit/ cellular phone)
During a phone call conversation. Then, continue your conversation using the other media.
EN08-15_KD-BT11_003A_4.indd 14 11/30/07 5:04:28 PM
Using the Bluetooth audio player

Select BLUETOOTH.

Pressing can enter the Bluetooth menu directly.
Establish the connection with a Bluetooth audio player.
If playback does not start automatically, operate the Bluetooth audio player to start playback.
[Press] Reverse skip/forward skip [Hold] Reverse search/forward search Select group/folder
After pressing M MODE, press the following buttons. Select repeat play Select random play
Start/pause playback Refer also to page 12 for registering/connecting/ disconnecting/deleting a registered device. Bluetooth Information: If you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.jvc-victor.co.jp/english/car/>.
EN08-15_KD-BT11_003A_4.indd 15

11/30/07 5:04:31 PM

Operations and display indications differ depending on their availability on the connected audio player.
Listening to the CD changer
It is recommended to use a JVC MP3-compatible CD changer (separately purchased) with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. You can only play conventional CDs (including CD Text) and MP3 discs. Preparation: Make sure CHANGER is selected for the external input setting, see page 26.

Select CD-CH.

Select a disc to start playing.
[Press] For selecting disc number 1 6. [Hold] For selecting disc number 7 12.
[Press] Select track [Hold] Reverse/fast-forward track MP3: Select folders
After pressing M MODE, press the following buttons. Skip 10 tracks MP3: Within the same folder TRACK RPT: Repeat current track FOLDER RPT: MP3: Repeat all tracks of current folder DISC RPT: Repeat all tracks of the current disc FOLDER RND: MP3: Randomly play all tracks of the current folder, then tracks of the next folder DISC RND: Randomly play all tracks of current disc ALL RND: Randomly play all tracks of the discs in the magazine To cancel repeat play or random play, select RPT OFF or RND OFF.
EN16-21_KD-BT11_003A_3.indd 16 11/30/07 3:12:01 PM

Listening to the iPod

Before operating, connect the Interface adapter for iPod, KS-PD100 (separately purchased) to the CD changer jack on the rear of the unit. Preparation: Make sure CHANGER is selected for the external input setting, see page 26.

Select IPOD.

Select a song to start playing.
Selecting a track from the menu

Enter the main menu.

Pause/stop playback To resume playback, press the button again. [Press] Select tracks [Hold] Reverse/fast-forward track

attenuates the sound when the power is on. Turns the power off if pressed and held. 2 Changes the FM/AM/DAB bands with 5 U. Changes the preset stations (or DAB services) with D. Changes the folder of the MP3/WMA. While playing an MP3 disc on an MP3-compatible CD changer: Changes the disc if pressed briefly. Changes the folder if pressed and held. While listening to an Apple iPod: Pauses or resumes playback with D. Enters the main menu with 5 U. (Now 5 U/D /2 R/F 3 work as the menu selecting buttons.)* * 5 U : Returns to the previous menu. D : Confirms the selection. 3 Adjusts the volume level. 4 Selects the sound mode (iEQ: intelligent equalizer). 5 Selects the source. 6 For Bluetooth cellular phone: Answers calls if pressed briefly. Rejects calls if pressed and held.
EN16-21_KD-BT11_003A_3.indd 21

11/30/07 3:12:06 PM

7 Searches for stations (or DAB services) if pressed
briefly. Searches for DAB ensembles if pressed and held. Fast-forwards or reverses the track if pressed and held. Changes the tracks if pressed briefly.
While listening to an iPod (in menu selecting mode): Selects an item if pressed briefly. (Then, press D to confirm the selection.) Skips 10 items at a time if pressed and held. Reverse skip/forward skip for Bluetooth audio.
Selecting a preset sound mode
You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer).
Enter functions mode. Select a preset sound mode.
Storing your own sound mode
You can adjust the sound modes and store your own adjustments in memory. The adjustment you make will be stored for the currently selected sound mode (iEQ) including USER.
Adjust the sound elements of the selected tone. 1 Adjust the frequency.

Select a sound mode.

2 Adjust the level.
Enter the adjustment mode.
This mode will be canceled if no operations are done for about 5 seconds.
3 Adjust the quality slope (Q).

Select a tone.

CLOCK HOUR Hour adjustment CLOCK MIN Minute adjustment

(1 12) 00 59

EN22-29_KD-BT11_003A_5.indd 24 12/7/07 3:36:36 PM
Indications 24H/12H Time display mode CLOCK ADJ *2 Clock adjustment AF-REG *2 Alternative frequency/ regionalization reception
12 HOUR 24 HOUR AUTO OFF AF
: See also page 4 for setting. : The built-in clock is automatically adjusted using the clock data provided via the satellite radio channel. : Cancels. : When the currently received signals become weak, the unit switches to another station (the programme may differ from the one currently received), [9]. The AF indicator lights up. : When the currently received signals become weak, the unit switches to another station broadcasting the same programme. The AF and REG indicators light up. : Cancels (not selectable when DAB AF is set to AF ON). Activates PTY Standby Reception with one of the PTY codes, [8]. [Initial: VOLUME 15]

AF-REG

AF OFF PTY-STANDBY *2 PTY standby TA VOLUME *2 Traffic announcement volume P-SEARCH *2 Programme search OFF, PTY codes VOLUME 00 VOLUME 50 (or VOLUME 00 VOLUME 30)*3 ON OFF
: Activates Programme Search, [9]. : Cancels. : Traces the programme among DAB services and FM RDS stations, [19]. : Cancels. : Dims the display and button illumination when you turn on the headlights. : Activates dimmer. : Cancels.
DAB AF *4 AF ON Alternative frequency reception AF OFF DIMMER Dimmer AUTO ON OFF
*1 If the power supply is not interrupted by turning off the ignition key of your car, it is recommended that you select CLOCK OFF to save the cars battery. *2 Only for RDS FM stations. *3 Depends on the amplifier gain control. *4 Displayed only when DAB tuner is connected.
EN22-29_KD-BT11_003A_6.indd 25

12/17/07 4:43:08 PM

Item ( : Initial)
Setting, [reference page]

Indications

Item ( : Initial) ONCE AUTO OFF
Setting, [reference page] : : : Scrolls the displayed information once. Repeats scrolling (at 5-second intervals). Cancels. Pressing DISP for more than one second can scroll the display regardless of the setting.

SCROLL *5 Scroll

L/O MODE Line output mode

REAR SUB.W

: Select if the REAR LINE OUT terminals are used for connecting the rear speakers (through an external amplifier). : Select if the REAR LINE OUT terminals are used for connecting a subwoofer (through an external amplifier). : Frequencies lower than 90 Hz are sent to the subwoofer. : Frequencies lower than 135 Hz are sent to the subwoofer. : Frequencies lower than 180 Hz are sent to the subwoofer. : Select either 0 DEG or 180 DEG which reproduces a better sound. : To connect a JVC CD changer, [16], or an Apple iPod, [17]. : To connect portable audio player to the CD changer jack, [20]. : Shows the Tag information while playing MP3/WMA tracks. : Cancels.

SUB.W FREQ *6 Subwoofer cutoff frequency SUB.W PHASE *6 Subwoofer phase EXT INPUT *7 External input TAG DISPLAY Tag display AMP GAIN Amplifier gain control IF BAND Intermediate frequency band
LOW MID HIGH 180 DEG 0 DEG CHANGER EXT INPUT TAG ON TAG OFF LOW POWER
: VOLUME 00 VOLUME 30 (Select this if the maximum power of the speaker is less than 50 W to avoid damaging the speaker.) HIGH POWER : VOLUME 00 VOLUME 50 AUTO WIDE : Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) : Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain.
*5 Some characters or symbols will not be shown correctly (or will be blanked) on the display. *6 Displayed only when L/O MODE is set to SUB.W. *7 Displayed only when one of the following sources is selectedFM, AM, DAB, CD, BLUETOOTH, AUX IN.
EN22-29_KD-BT11_003A_3.indd 26 11/30/07 3:11:53 PM

Bluetooth settings

You can change the settings listed on the right column according to your preference.
Enter the Bluetooth menu.
AUTO ANSWER The unit answers the incoming calls automatically. OFF: The unit does not answer the calls automatically. Answer the calls manually. REJECT: The unit rejects all incoming calls. ON: MSG NOTICE (message notice) ON *1: The unit informs you of the arrival of a message by ringing and displaying RCV MESSAGE (receiving message). OFF: The unit does not inform you of the arrival of a message. MIC SETTING (microphone setting) Adjust the built-in microphone volume, [LEVEL 01/02/03].

Select SETTINGS.

Select a setting item.
AUTO CNNCT = AUTO ANSWER = MSG NOTICE *1 = MIC SETTING = PHONEBOOK = INITIALIZE = INFORMATION = (back to the beginning)
PHONEBOOK Load the phone book of the Bluetooth phone to the unit. (You can load up to 50 phone numbers.) Before using this function, make sure that the Bluetooth phone is connected. INITIALIZE Initialize all settings you have made in the Bluetooth menu. NO: Return to the previous screen. YES: INFORMATION NAME: Name of the unit (as shown on Bluetooth devices). ADDRESS: Address of the unit. VERSION: Hardware and software versions of the Bluetooth module. PHONE NAME*2: Name of the connected Bluetooth phone. AUDIO NAME*2: Name of the connected Bluetooth audio player. 1 If the connected Bluetooth phone does not support * text message notification (via Bluetooth), the unit will not receive any notification upon the arrival of a text message. *2 Appears only when a Bluetooth phone/audio player is connected.
Change the setting accordingly.
If PHONEBOOK is selected in step 3, enter the PIN code both for this unit and Bluetooth phone (see page 11: steps 4 and 5), then press 5 to exit. Setting menu ( : Initial) AUTO CNNCT (connect) When the unit is turned on, the connection is established automatically with. OFF: No Bluetooth device. LAST: The last connected Bluetooth device.

Playing a CD-R or CD-RW

Use only finalized CD-Rs or CD-RWs. This unit can only play back files of the same type as those detected first if a disc includes both audio CD (CD-DA) files and MP3/WMA files. This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing.
EN22-29_KD-BT11_003A_3.indd 28 11/30/07 3:11:54 PM
Some CD-Rs or CD-RWs may not play back on this unit because of their disc characteristics, or for the following reasons: Discs are dirty or scratched. Moisture condensation has occurred on the lens inside the unit. The pickup lens inside the unit is dirty. The files on the CD-R/CD-RW are written using the Packet Write method. There are improper recording conditions (missing data, etc.) or media conditions (stained, scratched, warped, etc.). CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs. Do not use the following CD-Rs or CD-RWs: Discs with stickers, labels, or a protective seal stuck to the surface. Discs on which labels can be directly printed by an ink jet printer. Using these discs under high temperature or high humidity may cause malfunctions or damage to the unit.

Playing an MP3/WMA disc

This unit can play back MP3/WMA files with the extension code <.mp3> or <.wma> (regardless of the letter caseupper/lower). This unit can show the names of albums, artists (performer), and Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 files and for WMA files. This unit can display only one-byte characters. No other characters can be correctly displayed. This unit can play back MP3/WMA files meeting the conditions below: Bit rate of MP3: 32 kbps 320 kbps Sampling frequency of MP3: 48 kHz, 44.1 kHz, 32 kHz (for MPEG-1) 24 kHz, 22.05 kHz, 16 kHz (for MPEG-2) Bit rate of WMA: 32 kbps 192 kbps Disc format: ISO 9660 Level 1/Level 2, Romeo, Joliet, Windows long file name
The maximum number of characters for file/folder names vary depending on the disc format used (includes 4 extension characters<.mp3> or <.wma>). ISO 9660 Level 1: up to 12 characters ISO 9660 Level 2: up to 31 characters Romeo *: up to 128 characters Joliet *: up to 64 characters Windows long file name *: up to 128 characters * The parenthetic figure is the maximum number of characters for file/folder names in case the total number of files and folders is 271 or more. This unit can recognize a total of 512 files, 200 folders, and 8 hierarchical levels. This unit can play back files recorded in VBR (variable bit rate). Files recorded in VBR have a discrepancy in the elapsed time display, and do not show the actual elapsed time. In particular, this difference becomes noticeable after performing the search function. This unit cannot play back the following files: MP3 files encoded in MP3i and MP3 PRO format. MP3 files encoded in an inappropriate format. MP3 files encoded with Layer 1/2. WMA files encoded in lossless, professional, and voice format. WMA files which are not based upon Windows Media Audio. WMA files copy-protected with DRM. Files which have data such as AIFF, ATRAC3, etc. The search function works but search speed is not constant.

EN30-35_KD-BT11_003A_3.indd 31

11/30/07 3:12:20 PM

Symptoms
Remedies/Causes The playback order is determined when the files are recorded. This sometimes occurs during playback. This is caused by how the tracks are recorded on the disc. This unit can only display letters (upper case), numbers, and a limited number of symbols. Search from the Bluetooth device again. Reset the unit. When WAIT PAIR appears on the display, search from the Bluetooth device again. Enter the same PIN code for both the unit and target device. Reduce the distance between the unit and the Bluetooth cellular phone. Move the car to a place where you can get a better signal reception. Reduce the distance between the unit and the Bluetooth audio player. Disconnect the device connected for PHONE. Turn off, then turn on the unit. When the sound is not yet restored: Connect the player again. Check whether the connected audio player supports AVRCP (Audio Video Remote Control Profile). (Operations depend on the connected audio player.) Disconnect and connect the Bluetooth player again. You may have tried to copy the same entries (as stored) to the unit. Press 5 to exit. Insert a disc into the magazine. Insert the magazine. Connect this unit and the CD changer correctly and press the reset button of the CD changer. Press the reset button of the CD changer. Reset the unit (see page 3).
MP3/WMA playback Bluetooth CD changer
Tracks do not play back in the order you have intended them to play. The elapsed playing time is not correct. The correct characters are not displayed (e.g. album name). The unit cannot be detected by the Bluetooth device. The unit does not make pairing with the Bluetooth device. Phone sound quality is poor.
The sound is interrupted or skipped during playback of a Bluetooth audio player.
The connected audio player cannot be controlled.
The unit does not response when you tried to copy the phone book to the unit. NO DISC appears on the display. NO MAGAZINE appears on the display. RESET 8 appears on the display. RESET 1 RESET 7 appears on the display. The CD changer does not work at all.
EN30-35_KD-BT11_003A_4.indd 32 12/4/07 5:04:01 PM
Symptoms noSIGNAL appears on the display. RESET 8 appears on the display. DAB ANTENNA NG appears on the display. The DAB tuner does not work at all.

Remedies/Causes

Connect this unit and the DAB tuner correctly and reset the unit (see page 3). Check the cords and connections. Reconnect this unit and the DAB tuner correctly and reset the unit (see page 3).
The iPod does not turn on or does not work. Check the connecting cable and its connection. Update the firmware version. Charge the battery. The sound is distorted. NO IPOD appears on the display. Playback stops. iPod No sound can be heard when connecting an iPod nano. NO FILES appears on the display. RESET 1 RESET 7 appears on the display. RESET 8 appears on the display. The iPods controls do not work after disconnecting from this unit. Deactivate the equalizer either on this unit or the iPod. Check the connecting cable and its connection. Charge the battery. The headphones are disconnected during playback. Restart the playback operation (see page 17). Disconnect the headphones from the iPod nano. Update the firmware version of the iPod nano. No tracks are stored. Import tracks to the iPod. Disconnect the adapter from both this unit and iPod. Then, connect it again. Check the connection between the adapter and this unit. Reset the iPod.

Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Victor Company of Japan, Limited (JVC) is under license. Other trademarks and trade names are those of their respective owners. iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
EN30-35_KD-BT11_003A_7.indd 33

12/18/07 8:54:50 AM

Move to an area with stronger signals.

Maintenance

How to clean the connectors
Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.

To keep discs clean

A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. Do not use any solvents (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs.

Connectors

To play new discs
New discs may have some rough spots around the inner and outer edges. If such a disc is used, this unit may reject the disc. To remove these rough spots, rub the edges with a pencil or ball-point pen, etc. Do not use the following discs:
Single CD (8 cm disc) Warped disc

Moisture condensation

Moisture may condense on the lens inside the unit in the following cases: After starting the heater in the car. If it becomes very humid inside the car. Should this occur, the unit may malfunction. In this case, eject the disc and leave the unit turned on for a few hours until the moisture has evaporated.

How to handle discs

When removing a disc from its Center holder case, press down the center holder of the case and lift the disc out, holding it by the edges. Always hold the disc by the edges. Do not touch its recording surface. When storing a disc in its case, gently insert the disc around the center holder (with the printed surface facing up). Make sure to store discs in cases after use.
Sticker and sticker residue

Stick-on label

Unusual shape
EN30-35_KD-BT11_003A_3.indd 34 11/30/07 3:12:21 PM

Specifications

AUDIO AMPLIFIER SECTION
Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 , 40 Hz to Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 (4 to 8 allowance) Tone Control Range: Bass: 12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz) Mid-range: 12 dB (500 Hz, 1.0 kHz, 1.5 kHz, 2.5 kHz) Treble: 12 dB (10.0 kHz, 12.5 kHz, 15.0 kHz, 17.5 kHz) Q: Bass: Q1.0, Q1.25, Q1.5, Q2.0 Mid-range: Q0.5, Q0.75, Q1.0, Q1.25 Frequency Response: 40 Hz to Hz Signal-to-Noise Ratio: 80 dB Line-Out/ 2.5 V/20 k load (full scale) Subwoofer-Out Level/Impedance: Output Impedance: 1 k Other Terminals: CD changer jack, Steering wheel remote input, AUX (auxiliary) input jack, Aerial input

CD PLAYER SECTION

Type: Compact disc player Signal Detection Non-contact optical pickup System: (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to Hz Dynamic Range: 96 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit MP3 Decoding Format: (MPEG1/2 Audio Layer 3) Max. Bit Rate: 320 kbps WMA (Windows Media Audio) Decoding Format: Max. Bit Rate: 192 kbps

BLUETOOTH

Version: Power Class: Service Area: Profile: Bluetooth 1.2 certified Class 2 Radio (possible distance 10 m) 10 m HFP 1.5, OPP 1.1, A2DP 1.2, AVRCP 1.3

GENERAL

Power Requirement: Operating Voltage: DC 14.4 V (11 V to 16 V allowance) Negative ground 0C to +40C

TUNER SECTION

Frequency Range: FM: AM: FM Tuner Usable Sensitivity: 50 dB Quieting Sensitivity: Alternate Channel Selectivity (400 kHz): Frequency Response: Stereo Separation: MW Tuner Sensitivity/Selectivity: LW Tuner Sensitivity: 87.5 MHz to 108.0 MHz MW: 522 kHz to kHz LW: 144 kHz to 279 kHz 11.3 dBf (1.0 V/75 ) 16.3 dBf (1.8 V/75 ) 65 dB 40 Hz to Hz 30 dB 20 V/35 dB 50 V
Grounding System: Allowable Operating Temperature: Dimensions (W H D): (approx.) Installation Size: 182 mm 52 mm 160 mm Panel Size: 188 mm 58 mm 13 mm Mass: 1.3 kg (excluding accessories) Design and specifications are subject to change without notice.
EN30-35_KD-BT11_003A_3.indd 35

11/30/07 3:12:22 PM

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit
Vous avez des PROBLMES de fonctionnement?
Rinitialisez votre appareil
Rfrez-vous la page intitule Comment rinitialiser votre appareil
Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of Victor Company of Japan, Limited is: JVC Technology Centre Europe GmbH Company name changed in: JVC Technical Services Europe GmbH Postfach Friedberg Germany
Cher(e) client(e), Cet appareil est conforme aux directives et normes europennes en vigueur concernant la compatibilit lectromagntique et la scurit lectrique. Reprsentant europen de la socit Victor Company of Japan, Limited: JVC Technology Centre Europe GmbH Le nom de la compagnie a chang dans: JVC Technical Services Europe GmbH Postfach Friedberg Allemagne.

 

Technical specifications

General
Product TypeRadio / CD / MP3 player
Recommended UseCar
Form FactorFull-DIN - in-dash unit
Faceplate TypeDetachable
Audio System
System Control BusJ-Link
Sound Output ModeStereo
EqualizerYes
ControlsVolume, fader, balance, attenuate
Max Output Power / Channel Qty50 Watts x 4
Multicolor DisplayYes
CD Changer ControlYes
Additional FeaturesTelephone mute, CD Text capable, rotary encoder multi-control, ID3 tags support, Bluetooth hands-free for cellular phone, HD radio ready, iPod ready, Bluetooth audio streaming
Equalizer
Equalizer TypeParametric
Equalizer Band Qty3 bands
Radio
TypeRadio tuner - AM/FM
Preset Station Qty24 preset stations
AM Preset Station Qty6 preset stations
FM Preset Station Qty18
Additional FeaturesPreset buttons, FM stereo/mono switch, best stations memory
CD System
TypeCD / MP3 player
Media Load TypeSlot-load
Supported Digital Audio StandardsWMA, MP3
CD-R CompatibleYes
CD-RW CompatibleYes
Connections
Connector Type1 x audio line-out 1 x audio line-in
Remote Control
TypeRemote control
TechnologyInfrared
Miscellaneous
Included AccessoriesMicrophone
Universal Product Identifiers
BrandJVC
Part NumberKD-BT11
GTIN04975769349478, 00046838032905

 

Tags

FWD-S47h1 Motorola 8700 Stonekeep XR-10S Fisheasy ST MM-ZB9 CMT-DC1 MEX-R1 LE40B550 RT-21FA35RX FJ1200SC VZ-2500H VR540-39 Stick FT-100D LG XD63 Palm OS VGN-A517M Stylus-7040 T 984 MS-3446VR Netscanev30 HT762TZ-a2 MUM7400UC UX-B700 TX-SA507 Elna 6003 HT353SD 2333HD-1 Bell 351 DVD-V6500 DCR-SX43E Xv-dv151 AW-SW300 KM-1650 CWL4GE RM1300 User Cd Receiver With Bluetooth Altima 63010 Impressa 601 HDR-XR200E SP-404SX SLV-D910B 6000U FLS462C HM1810 Panda CE 4500 SRS-D211 Micro Delphi PSS-100 Software 1200 CP FS-1028MFP ADR560 TCF741 NVD-V003-space-ver-space-3-00- GC2560 Specs Review WA95F3 DVD-A1XVA Mark S807 Abit AW8 PLC-XU46 Microtower Mastermind PV-DV102D DP-500M TTR230-2005 Leica M3 CM 127 PEG-S320 S8100 FD SLV-D990PR DM-520 Centro Sl XB Turbo-9R TI-5660 RL24fcsw Supernova - 2004 Extensa 5210 A570 IS F27650 Bluetooth CZ02RT11P EL-1197PII 630 530 HT-C750W BT2070 Imac G5 AS18FCN PLA-401 V3 Lexmark W840 M1active WD-1480FD Classic NO 0870 4-mercenaries UE-32C6000RW

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101