CD RECEIVER

CD-RECEIVER -

KD-S1501/KD-G152/KD-G151

For canceling the display demonstration, see page 7. Zum Abbrechen der Displaydemonstration siehe Seite 7. . . 7. For installation and connections, refer to the separate manual. Fr den Einbau und die Anschlsse siehe das eigenstndige Handbuch. .

INSTRUCTIONS

BEDIENUNGSANLEITUNG

GET0287-006A

Cover_KD-S1501[EY]006A_f.indd 2

10/29/04 12:30:22 PM

CCK DEUTSCH ENGLISH

ENGLISH

Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Warning:

If you need to operate the receiver while driving, be sure to look ahead carefully or you may be involved in a traffic accident.
How to forcibly eject a disc
If a disc cannot be recognized by the receiver or cannot be ejected, ejects the disc as follows.

How to reset your unit

This will reset the microcomputer. Your preset adjustments will also be erased. If a disc is loaded, it will eject. Be careful not to drop the disc.
If this does not work, try to reset your receiver. Be careful not to drop the disc when it ejects.
For security reasons, a numbered ID card is provided with this receiver, and the same ID number is imprinted on the receivers chassis. Keep the card in a safe place, as it will help the authorities to identify your receiver if stolen. 2
EN02-05_KD-S1501[EY]006A_f.indd 2

10/29/04 2:29:59 PM

Contents
3 How to reset your unit.. How to forcibly eject a disc. How to read this manual. How to use the MODE button.. 4 4
Disc operations.. 13 Playing a disc.. 13
Selecting the playback modes. 14
Control panel KD-S1501/ KD-G152/KD-G151. 5

Parts identification.. 5

Sound adjustments. 15 Selecting preset sound modes (C-EQ: custom equalizer). 15

Adjusting the sound. 16

Getting started.. 6 Basic operations.. 6
Canceling the display demonstrations. Setting the clock. 7 7

General settings PSM. 17

Basic procedure.. 17
Radio operations. 8 Listening to the radio.. 8
Storing stations in memory.. Listening to a preset station. 9 9
Detaching the control panel.. 19 Maintenance. 20 More about this receiver. 21 Troubleshooting. 22 Specifications.. 23
FM RDS operations.. 10 Searching for your favorite FM RDS programme.. 10
Storing your favorite programmes. 11 Using the standby receptions.. 11 Tracking the same programme Network-Tracking Reception. 12

*For safety.

Do not raise the volume level too much, as this will block outside sounds, making driving dangerous. Stop the car before performing any complicated operations.
*Temperature inside the car.
If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.
EN02-05_KD-S1501[EX_EU]f.indd 3

10/27/04 3:22:06 PM

How to read this manual
The following methods are used to made the explanations simple and easy-to-understand: Some related tips and notes are explained in More about this receiver (see page 21). Button operations are mainly explained with the illustrations as follows:
How to use the MODE button
If you press MODE, the receiver goes into functions mode, then the number buttons work as different function buttons. Ex.: When number button 2 works as MO (monaural) button.

Press briefly.

Press repeatedly.

Press either one.

Time countdown indicator
Press and hold until your desired response begins. Press and hold both buttons at the same time.
To use these buttons for original functions again after pressing MODE, wait for 5 seconds without pressing any of these buttons until the functions mode is cleared. Pressing MODE again also clears the functions mode.
EN02-05_KD-S1501[EX_EU]f.indd 4

Control panel

Parts identification

Display window

9 p q w e r t y u i o
+/ buttons DISP (display) button Loading slot Display window MODE button 0 (eject) button /4 buttons (standby/on/attenuator) button SEL (select) button EQ (equalizer) button MO (monaural) button SSM (Strong-station Sequential Memory) button CD button FM/AM button RPT (repeat) button RND (random) button T/P (traffic programme/programme type) button (control panel release) button Number buttons
; Tuner reception indicators MO (monaural), ST (stereo) a RDS indicators TP, PTY, AF, REG s CD indicator d RND (disc random) indicator f RPT (repeat) indicator g LOUD (loudness) indicator h EQ (equalizer) indicator j Sound mode (C-EQ: custom equalizer) indicators ROCK, CLASSIC, POPS, HIP HOP, JAZZ, USER also works as the time countdown indicator. k Main display l Source display Volume level indicator
EN02-05_KD-S1501[EX_EU]f.indd 5

10/27/04 3:22:07 PM

Getting started

Basic operations

To drop the volume in a moment (ATT)
To restore the sound, press it again.

To turn off the power

You cannot select CD as the playback source if there is no disc in the loading slot.
Caution on volume setting:
Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.

Volume level appears.

Volume level indicator
Adjust the sound as you want. (See pages 15 and 16.)
EN06-11_KD-S1501[EX_EU]f.indd 6

10/27/04 3:22:49 PM

Canceling the display demonstrations
If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]see page 17.

Setting the clock

2 Set the hour, minute, and clock
system. 1 Select CLOCK H (hour), then adjust the hour. 2 Select CLOCK M (minute), then adjust the minute. 3 Select 24H/12H, then select 24H (hour) or 12H (hour).

3 Finish the procedure.

4 Finish the procedure.
To check the current clock time when the power is turned off
To activate the display demonstration

In step 3 above.

EN06-11_KD-S1501[EX_EU]f.indd 7

10/27/04 3:22:50 PM

Radio operations

Listening to the radio

Lights up when receiving an FM stereo broadcast with sufficient signal strength.
2 Select the desired station frequencies.
When an FM stereo broadcast is hard to receive

Selected band appears.

Start searching for a station.
When a station is received, searching stops. To stop searching, press the same button again.
Lights up when monaural mode is activated.
To tune in to a station manually

In step above. 1

Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure. MONO OFF appears and the MO indicator goes off.
EN06-11_KD-S1501[EX_EU]f.indd 8

10/27/04 3:22:51 PM

Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting SSM (Strong-station Sequential Memory) 1 Select the FM band (FM1 FM3)

you want to store into.

Preset number flashes for a while.
Listening to a preset station
2 Select the preset station (1 6) you
SSM flashes, then disappears when automatic presetting is over. Local FM stations with the strongest signals are searched and stored automatically in the FM band.

Manual presetting

Ex.: Storing FM station of 92.5 MHz into the preset number 4 of the FM1 band.
To check the current clock time while listening to an FM (non-RDS) or AM station
For FM RDS stations, see page 12.
EN06-11_KD-S1501[EX_EU]f.indd 9

FM RDS operations

Searching for your favorite FM RDS programme
You can tune in to a station broadcasting your favorite programme by searching for a PTY code.
Start searching for your favorite programme.
The last selected PTY code appears.
Select one of your favorite programme type.
If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in.

PTY codes

or Select one of the twenty-nine PTY codes.
NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music), DOCUMENT
Ex.: When ROCK M is selected
EN06-11_KD-S1501[EX_EU]f.indd 10

10/29/04 11:49:32 AM

What you can do with RDS
RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. By receiving the RDS data, this receiver can do the following: Programme Type (PTY) Search (see page 10) Standby Reception of Traffic Announcement TA (see the following) or your favorite programme (PTY) (see pages 12 and 18) Tracing the same programme automatically Network-Tracking Reception (see page 12) Programme Search (see page 18)
other PTY codes into other preset numbers.
Using the standby receptions

TA Standby Reception

TA Standby Reception allows the receiver to switch temporarily to Traffic Announcement (TA) from any source other than AM. The volume changes to the preset TA volume level (see page 18).
Storing your favorite programmes
You can store six favorite programme types. Preset programme types in the number buttons (1 6):
To activate TA Standby Reception
The TP indicator either lights up or flashes.
1 Perform steps ~ and on page 10 to

select a PTY code.

2 Select the preset number (1 6) you

want to store into.

If the TP indicator lights up, TA Standby Reception is activated. If the TP indicator flashes, TA Standby Reception is not yet activated. (This occurs when you are listening to an FM station without the RDS signals required for TA Standby Reception.) To activate TA Standby Reception, tune in to another station providing these signals. The TP indicator will stop flashing and remain lit.
To deactivate the TA Standby Reception
The TP indicator goes off.
EN06-11_KD-S1501[EX_EU]f.indd 11

10/27/04 3:22:52 PM

3 Repeat steps 1 and 2 to store

PTY Standby Reception

PTY Standby Reception allows the receiver to switch temporarily to your favorite PTY programme from any source other than AM. To activate and select your favorite PTY code for PTY Standby Reception, see page 18. The PTY indicator either lights up or flashes. If the PTY indicator lights up, PTY Standby Reception is activated. If the PTY indicator flashes, PTY Standby Reception is not yet activated. To activate PTY Standby Reception, tune in to another station providing these signals. The PTY indicator will stop flashing and remain lit. To deactivate the PTY Standby Reception, select OFF for the PTY code (see page 18). The PTY indicator goes off.
Tracking the same programme Network-Tracking Reception
When driving in an area where FM reception is not sufficient enough, this receiver automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration below). When shipped from the factory, NetworkTracking Reception is activated. To change the Network-Tracking Reception setting, see page 18.
Programme A broadcasting on different frequency areas (01 05)

To check the current clock time while listening to an FM RDS station
EN12-17_KD-S1501[EX_EU]f.indd 12

10/29/04 11:50:02 AM

Disc operations

Playing a disc

Fast-forwards. Reverses. To the following tracks.
All tracks will be played repeatedly until you change the source or eject the disc.
To fast-forward or reverse the track
To go to the next or previous tracks
Total playing time of Total track number the inserted disc of the inserted disc
To the beginning of the current track, then the previous tracks. Elapsed playing time Current track number
To go to a particular track directly
To select a number from 01 06:
To stop play and eject the disc
To select a number from 07 12:
EN12-17_KD-S1501[EX_EU]f.indd 13

10/27/04 3:23:20 PM

Prohibiting disc ejection
You can lock a disc in the loading slot.
To check the current clock time while listening to a disc
To cancel the prohibition, repeat the same procedure.
Selecting the playback modes
You can use only one of the following playback modes at a time.
2 Select your desired playback mode.

Repeat play Mode

TRK RPT: RPT OFF:

Plays repeatedly

The current track. RPT lights up. Cancels.
Ex.: When TRK RPT is selected

Random play

DISC RND: RND OFF:

Plays at random

All tracks of the current disc. RND lights up. Cancels.
Ex.: When DISC RND is selected
EN12-17_KD-S1501[EX_EU]f.indd 14

Sound adjustments

Selecting preset sound modes (C-EQ: custom equalizer)
00 +++03 OFF ON OFF OFF ON OFF 15

10/27/04 3:23:21 PM

You can select a preset sound mode suitable to the music genre.

Indication

USER ROCK CLASSIC
(Flat sound) Rock or disco music Classical music Light music Funk or rap music Jazz music
Preset values BAS*1 TRE*2 LOUD*3

00 +03 +01 +04 +02 +02

POPS HIP HOP JAZZ
*1 BAS: Bass *2 TRE: Treble *3 LOUD: Loudness
Ex.: When ROCK is selected
Indication pattern for each sound mode:
EN12-17_KD-S1501[EX_EU]f.indd 15

Adjusting the sound

You can adjust the sound characteristics to your preference.
BAS*1 (bass) TRE*1 (treble) FAD*2 (fader)

To do:

Adjust the bass.
06 (min.) to +06 (max.) 06 (min.) to +06 (max.) R06 (Rear only) to F06 (Front only) L06 (Left only) to R06 (Right only) LOUD ON J LOUD OFF

Adjust the treble.

Adjust the front and rear speaker balance.
Ex.: When TRE is selected

BAL (balance)

LOUD*1 (loudness)
Indication pattern changes as you adjust the level.
Adjust the left and right speaker balance.
Boost low and high frequencies to produce a wellbalanced sound at low volume level.

VOL*3 (volume)

Adjust the volume. 00 (min.) to 30 or 50 (max.)*4
*1 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including USER. *2 If you are using a two-speaker system, set the fader level to 00. *3 Normally the +/ buttons work as the volume control. So you do not have to select VOL to adjust the volume level. *4 Depending on the amplifier gain control setting. (See page 18 for details.)
EN12-17_KD-S1501[EX_EU]f.indd 16

General settings PSM

Basic procedure
You can change PSM (Preferred Setting Mode) items listed on the table that follows.
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.

2 Select a PSM item.

5 Finish the procedure.
Ex.: When you select AMP GAIN

Indications

DEMO Display demonstration
Selectable settings, [reference page]
DEMO ON: [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7]. DEMO OFF: Cancels. (1 12), [7] [Initial: 0 (0:00)] 00 59, [7] [Initial: 00 (0:00)] 12H O 24H, [7] [Initial: 24H] AUTO: OFF: [Initial]; The built-in clock is automatically adjusted using the CT (clock time) data in the RDS signal. Cancels.
CLOCK H Hour adjustment CLOCK M Minute adjustment 24H/12H 24 hours or 12 hours time display CLK ADJ Automatic clock setting

To be continued. 17

EN12-17_KD-S1501[EX_EU]f.indd 17

10/27/04 3:23:22 PM

3 Adjust the PSM item selected.
AF-REG Alternative frequency/ regionalization reception
When the received signals from the current station become weak. AF: [Initial]; Switches to another station (the programme may differ from the one currently received), [12]. The AF indicator lights up. AF REG: Switches to another station broadcasting the same programme. The AF and REG indicators light up. OFF: Cancels. Activates PTY Standby Reception with one of the 29 PTY codes, [12]. OFF [Initial] = PTY codes, [10] = (back to the beginning) [Initial: VOL 20]; VOL 00 VOL 30 or 50*1, [11]
PTY-STBY PTY standby TA VOL Traffic announcement volume P-SEARCH Programme search
OFF: ILL SW*2 Illumination switch
Using the AF data, the receiver tunes in to another frequency broadcasting the same programme as the original preset RDS station is if the preset station signals are not sufficient. [Initial]; Cancels.

You can select the button illumination according to your preference. RED O GREEN [Initial: RED] MUTING 1/MUTING 2: Select either one which mutes the sounds while using the cellular phone. OFF: [Initial]; Cancels. You can change the maximum volume level of this receiver. LOW PWR: VOL 00 VOL 30 (Select this if the maximum power of the speaker is less than 45 W to prevent them from damaging the speaker.) HIGH PWR: [Initial]; VOL 00 VOL 50
TEL*2 Telephone muting AMP GAIN Amplifier gain control
*1 Depends on the amplifier gain control. *2 Only for KD-S1501.
EN18-23_KD-S1501[EX_EU]f.indd 18

10/29/04 3:49:57 PM

Detaching the control panel

10/27/04 3:23:52 PM

When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder.
Attaching the control panel
Before detaching the control panel, be sure to turn off the power.
EN18-23_KD-S1501[EX_EU]f.indd 19

Maintenance

ENGLISH How to clean the connectors
Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.

To keep discs clean

A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs.

To play new discs

New discs may have some rough spots around the inner and outer edges. If such a disc is used, this receiver may reject the disc. To remove these rough spots, rub the edges with a pencil or ball-point pen, etc.

Connector

Moisture condensation
Moisture may condense on the lens inside the CD player in the following cases: After starting the heater in the car. If it becomes very humid inside the car. Should this occur, the CD player may malfunction. In this case, eject the disc and leave the receiver turned on for a few hours until the moisture evaporates.

How to handle discs

When removing a disc from Center holder its case, press down the center holder of the case and lift the disc out, holding it by the edges. Always hold the disc by the edges. Do not touch its recording surface. When storing a disc into its case, gently insert the disc around the center holder (with the printed surface facing up). Make sure to store discs into the cases after use. Do not use the following discs:

Warped disc Sticker Sticker residue Disc Stick-on label
EN18-23_KD-S1501[EX_EU]f.indd 20

More about this receiver

Turning off the power
If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Use only finalized CD-Rs or CD-RWs. This receiver can play back multi-session discs; however, unclosed sessions will be skipped while playing. Some CD-Rs or CD-RWs may not play back on this receiver because of their disc characteristics, and for the following causes: Discs are dirty or scratched. Moisture condensation occurs on the lens inside the receiver. The pickup lens inside the receiver is dirty. CD-R or CD-RW on which the files are written with Packet Write method. There are improper recording conditions (missing data, etc.) or media conditions (stain, scratch, warp, etc.). CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs. Do not use the following CD-Rs or CD-RWs: Discs with stickers, labels, or protective seal stuck to the surface. Discs on which labels can be directly printed by an ink jet printer. Using these discs under high temperatures or high humidities may cause malfunctions or damages to discs.

Tuner operations

During SSM search. All previously stored stations are erased and stations are stored newly. Received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency). When SSM is over, the station stored in No. 1 will be automatically tuned in. When storing a station manually, a previously preset station is erased when a new station is stored in the same preset number.
Network-Tracking Reception requires two types of RDS signalsPI (Programme Identification) and AF (Alternative Frequency) to work correctly. Without receiving these data correctly, NetworkTracking Reception will not operate. If a Traffic Announcement is received, the volume level (TA Volume) automatically changes to the preset level.

Changing the source

If you change the source, playback also stops (without ejecting the disc). Next time you select CD for the playback source, disc play starts from where it has been stopped previously.

General

This receiver has been designed to reproduce CDs, and CD-Rs (Recordable)/CD-RWs (Rewritable) in audio CD (CD-DA) format. When a disc has been loaded, selecting CD for the playback source starts disc play.

Ejecting a disc

If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to prevent it from dust. (Disc will not play this time.)

Inserting a disc

When a disc is inserted upside down, the disc automatically ejects. Do not insert 8 cm discs (single CD) and unusual shape discs (heart, flower, etc.) into the loading slot.

General settingsPSM

If you change the AMP GAIN setting from HIGH PWR to LOW PWR while the volume level is set higher than VOL 30, the receiver automatically changes the volume level to VOL 30. 21
EN18-23_KD-S1501[EX_EU]f.indd 21

10/27/04 3:23:53 PM

Playing a CD-R or CD-RW

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.

Symptoms

Sound cannot be heard from the speakers. General

Causes

The volume level is set to the minimum level. Connections are incorrect.

Remedies

Adjust it to the optimum level. Check the cords and connections. Reset the receiver (see page 2). Store stations manually. Connect the aerial firmly. Insert the disc correctly. Insert a finalized CD-R/ CD-RW. Finalize the CD-R/ CD-RW with the component which you used for recording. Unlock the disc (see page 14). Eject the disc forcibly (see page 2). Stop playback while driving on rough roads. Change the disc. Check the cords and connections. Insert a disc into the loading slot. Insert the disc correctly.
This receiver does not work at all. SSM automatic presetting does not work. Static noise while listening to the radio. Disc automatically ejects. CD-R/CD-RW cannot be played back. Tracks on the CD-R/ CD-RW cannot be skipped. Disc can be neither played back nor ejected.
The built-in microcomputer may have functioned incorrectly due to noise, etc. Signals are too weak. The aerial is not connected firmly. Disc is inserted upside down. CD-R/CD-RW is not finalized.
Disc is locked. The CD player may have functioned incorrectly.

Disc playback

Disc sound is sometimes interrupted.
You are driving on rough roads. Disc is scratched. Connections are incorrect.
NO DISC appears on the display.
No disc is in the loading slot. Disc is inserted incorrectly.
EN18-23_KD-S1501[EX_EU]f.indd 22

Specifications

Maximum Power Output: Front: 45 W per channel Rear: 45 W per channel Continuous Power Output (RMS): Front: 17 W per channel into 4 , 40 Hz to Hz at no more than 0.8% total harmonic distortion. Rear: 17 W per channel into 4 , 40 Hz to Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 (4 to 8 allowance) Tone Control Range: Bass: 10 dB at 100 Hz Treble: 10 dB at 10 kHz Frequency Response: 40 Hz to Hz Signal-to-Noise Ratio: 70 dB Line-Out Level/Impedance: 2.0 V/20 k load (full scale) Output Impedance: 1 k Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of channels: 2 channels (stereo) Frequency Response: 5 Hz to Hz Dynamic Range: 96 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit

.. 19 .. 20 .. 21 . 22

. 8 .. 8

. 9 .. 9

FM RDS. 10 FM RDS. 10

. 11 .. 11 (- ). 12

, , . , .

, , , , . 3
RU02-05_KD-S1501[EY]f.indd 3

10/26/04 5:45:41 PM

.. 6 . 6

PSM. 17

.. 17
, , : (. 21). , , , , :

MODE

MODE , . : 2 ().

. .

MODE, 5 , , . MODE .
RU02-05_KD-S1501[EY]f.indd 4

KD-S1501/KD-G152/KD-G151

+/ DISP () MODE 0 () /4 (/ /) SEL () EQ () MO () SSM (Strong-station Sequential Memory ) CD FM/AM RPT ( ) RND ( ) T/P ( / ) ( )
; MO (), ST () a RDS TP, PTY, AF, REG s CD ( d RND ) f RPT ( ) g LOUD () h EQ () j (C-EQ: ) ROCK, CLASSIC, POPS, HIP HOP, JAZZ, USER . k l
RU02-05_KD-S1501[EY]f.indd 5

10/26/04 5:45:42 PM

(ATT)

CD , .

. , - .

. (. 15 16).

RU06-11_KD-S1501[EY]f.indd 6

10/26/04 6:12:46 PM

20 , . [ : DEMO ON]. 17.

12- 24-.

1 CLOCK H () 2 CLOCK M ()

3 24H/12H,

24H () 12H ().
RU06-11_KD-S1501[EY]f.indd 7

10/26/04 5:46:23 PM

FM- .

. , .

. 1 , . . MONO OFF, MO. 8
RU06-11_KD-S1501[EY]f.indd 8

10/26/04 5:46:24 PM

FM (FM1 FM3) .

SSM, . FM FM.

(1 6).

: FM- 92,5 4 FM1.

FM ( RDS) AM

FM RDS. . 12.

RU06-11_KD-S1501[EY]f.indd 9

10/26/04 5:46:25 PM

FM-SSM (Strong-station Sequential Memory )

FM RDS

FM RDS

PTY , .

PTY.

, PTY, , .

PTY.
NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (), ROCK M (), EASY M (), LIGHT M (), CLASSICS, OTHER M (), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (), OLDIES, FOLK M (), DOCUMENT

: ROCK M

RU06-11_KD-S1501[EY]f.indd 10

10/29/04 1:51:42 PM

RDS
RDS (Radio Data System) FM- . RDS : (PTY) (. 10) TA (. ) (PTY) (. 12 18) - (. 12) (. 18)

PTY .

TA (TA) , AM. TA (. 18).

. (1 6):

1 PTY

~ . 10.

TP , .

(1 6) .

TP , TA. TP , TA . ( FM- RDS-, TA). TA , . TP .
RU06-11_KD-S1501[EY]f.indd 11

10/26/04 5:46:26 PM

PTY , AM. PTY PTY. . 18. PTY , .

(- )

, FM, FM RDS , (. ). , , - . - . . 18.
PTY , PTY. PTY , PTY . PTY , . PTY . PTY OFF PTY (. 18). PTY.

(01 05)

FM RDS
RU12-17_KD-S1501[EY]f.indd 12

10/29/04 1:52:08 PM

, .

.

, .

01 06:

07 12:
RU12-17_KD-S1501[EY]f.indd 13

10/26/04 5:46:56 PM

.

. RPT.

: TRK RPT

. RND.

: DISC RND
RU12-17_KD-S1501[EY]f.indd 14

10/26/04 6:13:25 PM

(C-EQ: )

( )

BAS*1 TRE*2 LOUD*3

00 ++01 OFF ON

CLASSIC POPS HIP HOP

+01 +04

02 +01 00

OFF OFF ON

+02 . +02

: ROCK

*1 BAS: *2 TRE: *3 LOUD:
RU12-17_KD-S1501[EY]f.indd 15

10/26/04 6:13:41 PM

BAS*1 ( ) TRE*1 ( )
06 (.). +06 (.) . 06 (.) +06 (.) R06 ( ) F06 ( ) L06 ( ) R06 ( )

FAD*2 () .

: TRE

BAL ()

LOUD ON LOUD*1 J () LOUD OFF . VOL*3 (). 00 (.) (.)*4
*1 (C-EQ), USER (). *2 00. *3 +/ . VOL . *4 . (. . 18).
RU12-17_KD-S1501[EY]f.indd 16

10/26/04 5:46:57 PM

PSM ( ), .

2 PSM. CCK

PSM, .

: AMP GAIN

DEMO CLOCK H CLOCK M 24H/12H 24- 12 CLK ADJ

, [ ]

DEMO ON: [ ]; 20 , , [7]. DEMO OFF:.
(1 12), [7] [ : 0 (0:00)] 00 59, [7] [ : 00 (0:00)] 12H O 24H, [7] [ : 24H]

[ ]; CT ( ) RDS. .

RU12-17_KD-S1501[EY]f.indd 17

10/26/04 5:46:58 PM

AF-REG /
. AF: [ ]; ( ), [12]. AF. AF REG: , . AF REG. OFF:. PTY 29 PTY, [12]. OFF [ ] = PTY, [10] = ( ) [ : VOL 20]; VOL 00 VOL 30 50*1, [11]
PTY-STBY PTY TA VOL P-SEARCH
OFF: ILL SW*2 TEL*2 AMP GAIN
AF, , , RDS . [ ];.
. RED O GREEN [ : RED] MUTING 1/MUTING 2: , . OFF: [ ];. . LOW PWR: VOL 00 VOL 30 ( , 45 ). HIGH PWR: [ ]; VOL 00 VOL 50

*1 . *2 KD-S1501. 18

RU18-23_KD-S1501[EY]f.indd 18

10/29/04 4:51:33 PM

.
RU18-23_KD-S1501[EY]f.indd 19

10/26/04 5:47:21 PM

. , , , .
. , . (, , , , .) .

. . , .

- : . . . , .
, . . , . , ( ). . :

RU18-23_KD-S1501[EY]f.indd 20

, , .

. ; , . - , : ; ; ; - ; ( .) (, , .). , -. - : , ; , . .
SSM. , . 1 ( ) - 6 ( ). SSM , 1. , .
RDS PI ( ) AF ( ). , - . , ( TA) .

( ). CD , .

-, - (CD-DA). , CD .

15 , . ( ).

, . 8 (- ) (, .) .
AMP GAIN HIGH PWR LOW PWR VOL 30, VOL 30.
RU18-23_KD-S1501[EY]f.indd 21

10/26/04 5:47:22 PM

. .

. . . . (. 2).

- . .
SSM . . . - . - . .
. . . . , . (. 14). (. 2). . . .

. . - .

. , - . .

, , .

. NO DISC ( ). 22 .
RU18-23_KD-S1501[EY]f.indd 22
: : 45 : 45 (RMS): : 17 4 , 40 0,8% . : 17 4 , 40 0,8% . : 4 ( 4 8 ) : : 10 100 : 10 10 : 40 /: 70 / : 2,0 /20 k ( ) : 1 k : 2 () : 5 : 96 /: 98 :
: : 14,4 ( 11 16 ) : : 0C +40C , ( ) (.): 182 52 150 (.): 188 58 11 (.): 1,3 ( ) .
() , , (7) . , , , / . , , (2) . (), , , , , JVC, , .
: FM: 87,5 108,0 AM: () 522 () 144 279

[ FM]

: 11,3 dBf (1,0 /75 ) 50 : 16,3 dBf (1,8 /75 ) (400 ): 65 : 40 : 30 : 1,5

[ CB]

: 20 : 35

: - : ( )

RU18-23_KD-S1501[EY]f.indd 23
Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit
Haben Sie PROBLEME mit dem Betrieb?
Bitte setzen Sie Ihr Gert zurck
Siehe Seite Zurcksetzen des Gerts
EN, GE, RU 2004 Victor Company of Japan, Limited

1004DTSMDTJEIN

Rear_KD-S1501[EY]006A_f.indd 2

10/29/04 12:31:49 PM

KD-S1501/KD-G152/KD-G151
Installation/Connection Manual Manuel dinstallation/raccordement

GET0287-010A

[EX/EU]

1004DTSMDTJEIN EN, FR

ENGLISH
This receiver is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC IN-CAR ENTERTAINMENT dealers.

FRANAIS

Cet appareil est conu pour fonctionner sur des sources de courant continu de 12 V masse NEGATIVE. Si votre vhicule noffre pas ce type dalimentation, il vous faut un convertisseur de tension, que vous pouvez acheter chez un revendeur dautoradios JVC.
Parts list for installation and connection
The following parts are provided for this receiver. After checking them, please set them correctly.
A/B Hard case/Control panel Etui de transport/Panneau de commande C Sleeve Manchon
Liste des pices pour linstallation et raccordement
Les pices suivantes sont fournies avec cet appareil. Aprs vrification, veuillez les placer correctement.
D Trim plate Plaque dassemblage E Power cord Cordon dalimentation
F Washer (5) Rondelle (5)
G Lock nut (M5) Ecrou darrt (M5)
H Mounting bolt (M5 x 20 mm) Boulon de montage (M5 x 20 mm)
I Rubber cushion Amortisseur en caoutchouc

J Handles Poignes

INSTALLATION (IN-DASH MOUNTING)
The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. If you are not sure how to install this receiver correctly, have it installed by a qualified technician.
INSTALLATION (MONTAGE DANS LE TABLEAU DE BORD)
Lillustration suivante est un exemple dinstallation typique. Si vous avez des questions ou avez besoin dinformation sur des kits dinstallation, consulter votre revendeur dautoradios JVC ou une compagnie dapprovisionnement. Si lon nest pas sr de pouvoir installer correctement cet appareil, le faire installer par un technicien qualifi.
Do the required electrical connections. Ralisez les connexions lectriques.
*1 When you stand the receiver, be careful not to damage the fuse on the rear. *1 Lorsque vous mettez lappareil la verticale, faire attention de ne pas endommager le fusible situ sur larrire.
Bend the appropriate tabs to hold the sleeve firmly in place. Tordez les languettes appropries pour maintenir le manchon en place.
Removing the receiver / Retrait de lappareil
Before removing the receiver, release the rear section. Avant de retirer lappareil, librer la section arrire.
When using the optional stay / Lors de lutilisation du hauban en option

Fire wall Cloison

When installing the receiver without using the sleeve / Lors de linstallation de lappareil scans utiliser de manchon
In a Toyota for example, first remove the car radio and install the receiver in its place.
Dashboard Tableau de bord
Insert the two handles, then pull them as illustrated so that the receiver can be removed. Insrez les deux poignes, puis tirez de la faon illustre de faon retirer lappareil.
Stay Par exemple dans une Toyota, retirer dabord lautoradio et installer lappareil la (option) place. Hauban (en * Not included for this option) receiver. Flat type screws * Non fourni avec cet appareil. (M5 x 8 mm)* Bracket* Vis tte plate Support* Screw (option) (M5 x 8 mm)* Flat type screws Vis (en option) (M5 x 8 mm)* Vis tte plate Pocket (M5 x 8 mm)* Bracket* Poche Support*
Note Install the receiver at an angle of less than 30. Installez lappareil avec un angle de moins de 30.
: When installing the receiver on the mounting bracket, make sure to use the 8 mm-long screws. If longer screws are used, they could damage the receiver. Remarque : Lors de linstallation de lappareil sur le support de montage, sassurer dutiliser des vis dune longueur de 8 mm. Si des vis plus longues sont utilises, elles peuvent endommager lappareil.
PRECAUTIONS on power supply and speaker connections:
DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the receiver will be seriously damaged. BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in your car.

PRECAUTIONS sur lalimentation et la connexion des enceintes:
NE CONNECTEZ PAS les fils denceintes du cordon dalimentation la batterie; sinon, lappareil serait srieusement endommag. AVANT de connecter les fils denceintes du cordon dalimentation aux enceintes, vrifiez le cblage des enceintes de votre voiture.

TROUBLESHOOTING

* * * * * * * * * The fuse blows. Are the red and black leads connected correctly? Power cannot be turned on. Is the yellow lead connected? No sound from the speakers. Is the speaker output lead short-circuited? Sound is distorted. Is the speaker output lead grounded? Are the terminals of L and R speakers grounded in common? Noise interfere with sounds. Is the rear ground terminal connected to the cars chassis using shorter and thicker cords? Receiver becomes hot. Is the speaker output lead grounded? Are the terminals of L and R speakers grounded in common? This receiver does not work at all. Have you reset your receiver? * * * * * * * * * 1

EN CAS DE DIFFICULTES

Le fusible saute. Les fils rouge et noir sont-ils racords correctement? Lappareil ne peut pas tre mise sous tension. Le fil jaune est-elle raccorde? Pas de son des enceintes. Le fil de sortie denceinte est-il court-circuit? Le son est dform. Le fil de sortie denceinte est-il la masse? Les bornes des enceintes gauche et droit sont-elles mises ensemble la masse? Interfrence avec les sons. La prise arrire de mise la terre est-elle connecte au chssis de la voiture avec un cordon court et pais? Lappareil devient chaud. Le fil de sortie denceinte est-il la masse? Les bornes des enceintes gauche et droit sont-elles mises ensemble la masse? Cet appareil ne fonctionne pas du tout. Avez-vous rinitialis votre appareil?
Instal1-2_S1501_010A_f.indd 2

20/10/04, 12:18:50 PM

ELECTRICAL CONNECTIONS
To prevent short circuits, we recommend that you disconnect the batterys negative terminal and make all electrical connections before installing the receiver. Be sure to ground this receiver to the cars chassis again after installation. Notes: Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC IN-CAR ENTERTAINMENT dealer. It is recommended to connect to the speakers with maximum power of more than 45 W (both at the rear and at the front, with an impedance of 4 to 8 ). If the maximum power is less than 45 W, change AMP GAIN setting to prevent the speakers from being damaged (see page 18 of the INSTRUCTIONS). To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape. Heat sink The heat sink becomes very hot after use. Be Dissipateur de chaleur careful not to touch it when removing this receiver.

To steering wheel remote controlleronly for KD-S1501 (see diagram ) Pour la tlcommande de volantseulement pour le KD-S1501 (voir le diagramme
Fuse position 2 / Position de fusible 2 Rear ground terminal Borne arrire de masse Line out (see diagram Sortie de ligne (voir le diagramme ) ) Black Noir Yellow*2 Jaune*2 Red Rouge 15 A fuse Fusible 15 A Fuse position 1 / Position de fusible 1
*1 Not included for this receiver *1 Non fourni avec cet appareil
Ignition switch Interrupteur dallumage
Aerial terminal Borne de lantenne
To metallic body or chassis of the car Vers corps mtallique ou chssis de la voiture To a live terminal in the fuse block connecting to the car battery (bypassing the ignition switch) (constant 12 V) une borne sous tension du porte-fusible connecte la batterie de la voiture (en drivant linterrupteur dallumage) (12 V constant) To an accessory terminal in the fuse block Vers borne accessoire du porte-fusible Fuse block Porte-fusible
*2 Before checking the operation of this receiver prior to installation, this lead must be connected, otherwise power cannot be turned on. *2 Pour vrifier le fonctionnement de cet appareil avant installation, ce fil doit tre raccord, sinon lappareil ne peut pas tre mis sous tension.
Blue with white stripe Bleu avec bande blanche Brown Marron
To the remote lead of other equipment or power aerial if any (200 mA max.) Au fil de tlcommande de lautre appareil ou lantenne automatique sil y en a une (200 mA max.) To cellular phone system (only for KD-S1501) un systme de tlphone cellulaire (seulement pour le KD-S1501)
White with black stripe Blanc avec bande noire

White Blanc

Gray with black stripe Gris avec bande noire

Gray Gris

Green with black stripe Vert avec bande noire

Green Vert

Purple with black stripe Violet avec bande noire
Purple Violet Right speaker (rear) Enceinte droit (arrire)
Left speaker (front) Enceinte gauche (avant)
Right speaker (front) Enceinte droit (avant)
Left speaker (rear) Enceinte gauche (arrire)
Connecting the external amplifier / Connexion dun amplificateur extrieur
Vous pouvez connecter un amplificateur pour amliorer votre systme autoradio. Connectez le fil de commande distance (bleu avec bande blanche) au fil de commande distance de lautre appareil de faon quil puisse tre command via cet appareil. Dconnectez les enceintes de cet appareil et connectez-les lamplificateur. Laissez les fils denceintes de cet appareil inutiliss.
You can connect an amplifier to upgrade your car stereo system. Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this receiver. Disconnect the speakers from this receiver, connect them to the amplifier. Leave the speaker leads of this receiver unused.