Here you can find all about JVC KD-R303 like manual and other informations. For example: .
JVC KD-R303 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a JVC KD-R303 please write about it to help other people. [ Report abuse or wrong photo | Share your JVC KD-R303 photo ]
JVC KD-R303 Car Audio, size: 245 KB
JVC KD-R303 Installation
User reviews and opinions
|foolhandy||7:59am on Sunday, July 25th, 2010|
|JVC CD/Radio - Great Sound, lacking in usability This unit installed really easily, with the aid of an adapter cable.|
|jonboy99||11:39am on Friday, March 26th, 2010|
|Didnt let me down. It is very good product in such a cheap price, with all the commenly used features. I would definitley recommend this product.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
For canceling the display demonstration, see page 6. Pour annuler la dmonstration des affichages, rfrez-vous la page 6.
For installation and connections, refer to the separate manual. Pour linstallation et les raccordements, se rfrer au manuel spar.
20/8/08 11:31:12 AM
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
If you need to operate the unit while driving, be sure to look around carefully or you may be involved in a traffic accident. Battery Products Information for Users on Disposal of Old Equipment and Batteries [European Union only] These symbols indicate that the product and the battery with this symbol should not be disposed as general household waste at its end-of-life. If you wish to dispose of this product and the battery, please do so in accordance with applicable national legislation or other rules in your country and municipality. By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health. Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead.
Caution on volume setting:
Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.
Do not raise the volume level too much, as this will block outside sounds, making driving dangerous. Stop the car before performing any complicated operations.
Temperature inside the car.
If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.
EN02-09_KD-R303_003A_2.indd 2 20/8/08 11:29:47 AM
How to reset your unit
OPERATIONS Basic operations.. Preparation.. Listening to the radio.. Disc operations.. 7 10
Your preset adjustments will also be erased.
How to forcibly eject a disc
EXTERNAL DEVICES Listening to the other external components... 11 SETTINGS Selecting a preset sound mode.. 12 Menu operations.. 13 REFERENCES More about this unit. Troubleshooting.. Maintenance.. Specifications..
Be careful not to drop the disc when it ejects. If this does not work, reset your unit.
Detaching the control panel
Attaching the control panel
EN02-09_KD-R303_003A_2.indd 3 20/8/08 11:29:53 AM
1 FM/AM: Select preset station. 2
CD: Select folder. Turn on the power. Attenuate the sound (if the power is on). Turn off the power [Hold]. Select the source. FM = CD *1 = AUX IN *2 = AM *2 = (back to the beginning) Enter list operations. Enter Menu setting [Hold]. Control the volume or selection [Turn]. *3 Confirm the selection [Press]. *3 FM: Enter SSM preset mode [Hold]. *3 CD: Enter playback mode [Hold]. *3 Loading slot Display window
8 Eject disc. 9 Activate/deactivate TA Standby Reception.
Enter PTY Searching mode [Hold].
p Detach the panel. q Change the display information. w FM/AM: Search for station.
CD: Select track.
e Return to the previous menu. r AUX (auxiliary) input jack
*1 You cannot select CD as the playback source if no disc is in the unit. *2 You cannot select these sources if they were disabled in the Menu (see Menu operations on page 15). *3 Also known as Control dial in this manual.
EN02-09_KD-R303_003A_2.indd 4 21/8/08 5:07:53 PM
1 Tr (track) indicator 2 Source display / Track number / Folder number /
7 LOUD (loudness) indicator 8 Disc information indicators
Time countdown indicator
3 DISC indicator 4 Sound mode indicatorsCLASSIC, HIP HOP, JAZZ,
TAG (Tag information),
ROCK, POPS, USER
5 Playback mode / item indicators RND (random),
9 Main display p Radio Data System indicatorsAF, REG, TP, PTY q Tuner reception indicatorsST (stereo),
(disc), (folder), RPT (repeat) 6 EQ (equalizer) indicator
20/8/08 11:29:54 AM
Cancel the display demonstration and set the clock
See also page 13.
Turn on the power. Cancel the display demonstrations
Select DEMO, then DEMO OFF.
Set the clock
Select CLOCK = CLOCK SET. Adjust the hour, then press control dial once to proceed to adjust the minute. Select 24H/12H, then 24 HOUR or 12 HOUR. To return to the previous menu, press BACK. When the power is turned off: Check the current clock time when CLOCK DISP is set to CLOCK OFF, (see page 13) When the power is turned on: Change the display information of the current source FM/AM Station Frequency = Clock = (back to the beginning)
[Turn] = [Press]
FM Radio Station name (PS) = Station Frequency = Programme type (PTY) = Clock = (back to the Data System beginning) CD Audio CD/CD Text: Disc title/performer *1 = Track title *1 = Current track number with the elapsed playing time = Current track number with the clock time = (back to the beginning) MP3/WMA: Album name/performer (folder name) *2 = Track title (file name) *2 = Current track number with the elapsed playing time = Current track number with the clock time = (back to the beginning)
*1 If the current disc is an audio CD, NO NAME appears. *2 If an MP3/WMA file does not have Tag information or TAG DISPLAY is set to TAG OFF (see page 13), folder name and file name appear.
EN02-09_KD-R303_003A_2.indd 6 20/8/08 11:29:55 AM
Listening to the radio
Select FM or AM. Search for a station to listenAuto Search.
Manual Search: Hold either one of the buttons until M flashes on the display, then press it repeatedly. When receiving an FM stereo broadcast with sufficient signal strength, ST lights up on the display.
When an FM stereo broadcast is hard to receive
See also page 14.
Select the preset number range you want to store.
Select TUNER = MONO = MONO ON Reception improves, but stereo effect will be lost. MO lights up on the display. To restore the stereo effect, repeat the same procedure to select MONO OFF. The MO indicator goes off. Local FM stations with the strongest signals are searched and stored automatically. To preset other 6 stations, repeat from step 1 again.
Manual presetting (FM/AM)
You can preset up to 18 stations for FM and 6 stations for AM. Ex.: Storing FM station of 92.50 MHz into preset number 04.
FM station automatic presetting SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
While listening to a station.
Select preset number 04.
Continued on the next page
10/9/08 2:56:02 PM
Start searching for your favorite programme. or
Selecting preset station
If a station is broadcasting a programme of the same PTY code as you have selected, that station is tuned in.
Using the standby receptions
TA Standby Reception [Turn] = [Press]
TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. The volume changes to the preset TA volume level if the current level is lower than the preset level (see page 14). To activate TA Standby Reception The TP (Traffic Programme) indicator either lights up or flashes. If the TP indicator lights up, TA Standby Reception is activated. If the TP indicator flashes, TA Standby Reception is not yet activated. (This occurs when you are listening to an FM station without the Radio Data System signals required for TA Standby Reception.) To activate the reception, tune in to another station providing these signals. The TP indicator will stop flashing and remain lit. To deactivate the TA Standby Reception The TP indicator goes off.
The following features are available only for FM Radio Data System stations.
Searching for FM Radio Data System programme PTY Search
You can tune in to a station broadcasting your favorite programme by searching for a PTY code.
The last selected PTY code appears. Select one of your favorite programme types or a PTY code.
EN02-09_KD-R303_003A_2.indd 8 20/8/08 11:29:57 AM
To activate and select your favorite PTY code for PTY Standby Reception, see page 14. The PTY indicator either lights up or flashes. If the PTY indicator lights up, PTY Standby Reception is activated. If the PTY indicator flashes, PTY Standby Reception is not yet activated. To activate the reception, tune in to another station providing these signals. The PTY indicator will stop flashing and remain lit. To deactivate the PTY Standby Reception, select PTY OFF for the PTY code (see page 14). The PTY indicator goes off.
Usually when you select a preset number, the station preset in that number is tuned in. If the signals from the FM Radio Data System preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency possibly broadcasting the same programme as the original preset station is broadcasting. The unit takes some time to tune in to another station using programme search. See also page 14.
NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music), DOCUMENT
Tracing the same programme Network-Tracking Reception
When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM Radio Data System station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration below).
Programme A broadcasting on different frequency areas (01 05)
When shipped from the factory, Network-Tracking Reception is activated. To change the Network-Tracking Reception setting, see AF-REG on page 14.
19/9/08 2:37:41 PM
PTY Standby Reception PTY Standby Reception allows the unit to switch temporarily to your favorite PTY programme from any source other than AM.
Automatic station selection Programme Search
Turn on the power. Insert a disc.
All tracks will be played repeatedly until you change the source or eject the disc.
Stop playing and ejecting the disc
NO DISC appears. Press SRC to listen to another playback source.
Pressing (or holding) the following buttons allows you to. MP3/WMA: Select folder
Prohibiting disc ejection
[Press] Select track [Hold] Reverse/fast-forward track
To cancel the prohibition, repeat the same procedure.
Selecting a track/folder
For MP3/WMA discs, select the desired folder, then the desired track by performing the control dial. To return to the previous menu, press BACK.
20/8/08 11:30:13 AM
Selecting the playback modes
You can use only one of the following playback modes at a time.
FOLDER RND : MP3/WMA: Randomly plays all tracks of current folder, then tracks of next folders : Randomly plays all tracks
To cancel repeat play or random play, select RPT OFF or RND OFF. To return to the previous menu, press BACK.
Listening to the other external components
You can connect an external component to AUX (auxiliary) input jack on the control panel. Preparation: Make sure AUX ON is selected in the SRC SELECT = AUX IN setting, see page 15.
Select AUX IN.
Turn on the connected component and start playing the source. Adjust the volume.
You can adjust the auxiliary input level to avoid the sudden increase of the output level (see AUX ADJUST on page 14).
Adjust the sound as you want (see page 12).
Connecting an external component to the AUX input jack
Portable audio player, etc. 3.5 mm stereo mini plug (not supplied)
OPERATIONS & EXTERNAL DEVICES
22/8/08 10:02:12 AM
TRACK RPT FOLDER RPT
: Repeats current track : MP3/WMA: Repeats current folder
Selecting a preset sound mode
You can select a preset sound mode suitable to the music genre. See also page 13 (EQ).
Storing your own sound mode
You can store your own adjustments in memory.
Select USER for EQ.
Select EQ = USER
Preset value setting for each sound mode
TREBLE LOUD BASS Preset values Indication (For) USER (Flat sound) ROCK (Rock or disco music) CLASSIC (Classical music) POPS (Light music) JAZZ (Jazz music)
While USER is shown on the display.
00 +03 +01 +04 +02
OFF ON OFF OFF ON OFF
If no operation is done for about 30 seconds, the operation will be canceled.
Select a tone.
HIP HOP (Funk or rap music) +02
Adjust the level. Tone BASS TREBLE Level 06 to +to +06
To return to the previous menu, press BACK.
Finish the procedure.
EN10-17_KD-R303_003A_2.indd 12 20/8/08 11:30:17 AM
Repeat step 2 if necessary. To return to the previous menu, press BACK. Initial: Underlined
Category Menu items DEMO Display demonstration CLOCK DISP *1 Clock display DEMO
Selectable settings, [reference page] DEMO ON DEMO OFF CLOCK ON CLOCK OFF : Display demonstration will be activated automatically if no operation is done for about 20 seconds, . : Cancels. : Clock time is shown on the display at all times when the power is turned off. : Cancels; pressing DISP will show the clock time for about 5 seconds when the power is turned off, .
CLOCK SET Clock setting
: Adjust the hour, then the minute, . [Initial: 0:00] : See also page 6 for setting. : The built-in clock is automatically adjusted using the CT (clock time) data in the Radio Data System signal. : Cancels.
24H/12H 24 HOUR Time display mode 12 HOUR CLOCK ADJ *2 Clock adjustment EQ Equalizer DIMMER Dimmer SCROLL*3 Scroll EQ AUTO OFF
: Select a preset sound mode suitable to the music genre. USER, ROCK, CLASSIC, POPS, HIP HOP, JAZZ DIMMER ON : Dims the display and button illumination. DIMMER OFF : Cancels. SCROLL ONCE : Scrolls the displayed information once. SCROLL AUTO : Repeats scrolling (at 5-second intervals). SCROLL OFF : Cancels. Pressing DISP for more than one second can scroll the display regardless of the setting. TAG ON TAG OFF : Shows the Tag information while playing MP3/WMA tracks. : Cancels.
TAG DISPLAY Tag display
*1 If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select CLOCK OFF to save the cars battery. *2 Takes effect only when CT (clock time) data is received. *3 Some characters or symbols will not be shown correctly (or will be blanked) on the display. Continued on the next page
19/9/08 2:38:52 PM
Category Menu items AF-REG *4 Alternative frequency/ regionalization reception
Selectable settings, [reference page] AF ON : When the currently received signals become weak, the unit switches to another station (the programme may differ from the one currently received), . The AF indicator lights up. : When the currently received signals become weak, the unit switches to another station broadcasting the same programme. The AF and REG indicators light up. : Cancels. Activates PTY Standby Reception with one of the PTY codes, .
OFF PTY-STANDBY * PTY standby TA VOLUME *4 Traffic announcement volume TUNER
PTY OFF, PTY codes
Initial: VOLUME 15 VOLUME 00 VOLUME 50 (or VOLUME 00 VOLUME 30)*5 : Activates Programme Search, . : Cancels. : Activate monaural mode to improve FM reception, but stereo effect will be lost, . : Restore the stereo effect. : Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) : Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. : Adjust the front and rear speaker output balance. [Initial: 00] : Adjust the left and right speaker output balance. [Initial: 00] : Cancels. : Boost low and high frequencies to produce a well-balanced sound at a low volume level. : Adjust the auxiliary input level to avoid the sudden increase of the output level when changing the source to external component connected to the AUX input jack on the control panel.
P-SEARCH *4 SEARCH ON Programme search SEARCH OFF MONO *6 Monaural mode IF BAND Intermediate frequency band MONO ON MONO OFF AUTO WIDE
FADER*7 Fader BALANCE Balance AUDIO LOUD Loudness AUX ADJUST Auxiliary input level adjustment *4 *5 *6 *7
R06 F06 L06 R06 LOUD OFF LOUD ON AUX ADJ 00 AUX ADJ 05
Only for FM Radio Data System stations. Depends on the amplifier gain control. Displayed only when the source is FM. If you are using a two-speaker system, set the fader level to 00.
12/9/08 5:56:56 PM
Category Menu items BEEP Keypress tone AUDIO TEL MUTING Telephone muting AMP GAIN *8 Amplifier gain control SRC SELECT AM *9 AM station AUX IN *10 Auxiliary input
Selectable settings, [reference page]
MUTING 1/ : Select either one which mutes the sounds while using a MUTING 2 cellular phone. MUTING OFF : Cancels. LOW POWER : VOLUME 00 VOLUME 30 (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speaker.) HIGH POWER : VOLUME 00 VOLUME 50 AM OFF AM ON AUX OFF AUX ON : Disable AM in source selection. : Enable AM in source selection, . : Disable AUX IN in source selection. : Enable AUX IN in source selection, .
*8 The volume level automatically changes to VOLUME 30 if you change to LOW POWER with the volume level set higher than VOLUME 30. *9 Displayed only when any source other than AM is selected. *10 Displayed only when any source other than AUX IN is selected.
More about this unit
Turning on the power
By pressing SRC button on the unit, you can also turn on the power. If the source is ready, playback also starts. After ejecting a disc, NO DISC appears and you cannot operate some of the buttons. Insert another disc or press SRC to select another playback source. If no operation is done for about 30 seconds after pressing MENU button, the operation will be canceled.
Turning off the power
If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power.
Storing stations in memory
During SSM search. All previously stored stations are erased and the stations are stored anew. When SSM is over, the station stored in the lowest preset number will be automatically tuned in. When storing a station manually, the previously preset station is erased when a new station is stored in the same preset number.
If you change the source while listening to a disc, playback stops. Next time you select CD as the playback source, playback will start from where it had been stopped previously.
SETTINGS & REFERENCES
28/8/08 3:43:26 PM
BEEP OFF BEEP ON
: Deactivates the keypress tone. : Activates the keypress tone.
FM Radio Data System operations
Network-Tracking Reception requires two types of Radio Data System signalsPI (Programme Identification) and AF (Alternative Frequency) to work correctly. Without receiving these data correctly, Network-Tracking Reception will not operate correctly. If a Traffic Announcement is received by TA Standby Reception, the volume level automatically changes to the preset level (TA VOL) if the current level is lower than the preset level. When Alternative Frequency Reception is activated (with AF selected), Network-Tracking Reception is also activated automatically. On the other hand, Network-Tracking Reception cannot be deactivated without deactivating Alternative Frequency Reception. (See page 14.)
Caution for DualDisc playback
The Non-DVD side of a DualDisc does not comply with the Compact Disc Digital Audio standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.
This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing. Some CD-Rs or CD-RWs may not play back on this unit because of their disc characteristics, or for the following reasons: Discs are dirty or scratched. Moisture condensation has occurred on the lens inside the unit. The pickup lens inside the unit is dirty. The files on the CD-R/CD-RW are written using the Packet Write method. There are improper recording conditions (missing data, etc.) or media conditions (stained, scratched, warped, etc.). CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs. Do not use the following CD-Rs or CD-RWs: Discs with stickers, labels, or a protective seal stuck to the surface. Discs on which labels can be directly printed by an ink jet printer. Using these discs under high temperature or high humidity may cause malfunctions or damage to the unit.
This unit has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/CD-RWs (Rewritable) in audio CD (CD-DA), MP3/WMA formats. When a disc is inserted upside down, PLEASE and EJECT appear alternately on the display. Press 0 to eject the disc. MP3 and WMA tracks (words file and track are used interchangeably) are recorded in folders. While fast-forwarding or reversing on an MP3 or WMA disc, you can only hear intermittent sounds.
Playing an MP3/WMA disc
This unit can play back MP3/WMA files with the extension code <.mp3> or <.wma> (regardless of the letter caseupper/lower). This unit can show the names of albums, artists (performer), and Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 files and for WMA files. This unit can display only one-byte characters. No other characters can be correctly displayed. This unit can play back MP3/WMA files meeting the conditions below: Bit rate: 8 kbps 320 kbps Sampling frequency: 48 kHz, 44.1 kHz, 32 kHz (for MPEG-1) 24 kHz, 22.05 kHz, 16 kHz (for MPEG-2) Disc format: ISO 9660 Level 1/Level 2, Romeo, Joliet, Windows long file name
Playing a CD-R or CD-RW
Use only finalized CD-Rs or CD-RWs. This unit can only play back files of the same type as those detected first if a disc includes both audio CD (CD-DA) files and MP3/WMA files.
EN10-17_KD-R303_003A_f.indd 16 19/9/08 2:56:33 PM
The maximum number of characters for file/folder names vary depending on the disc format used (includes 4 extension characters<.mp3> or <.wma>). ISO 9660 Level 1: up to 12 characters ISO 9660 Level 2: up to 31 characters Romeo: up to 128 characters Joliet: up to 64 characters Windows long file name: up to 128 characters This unit can recognize a total of 512 files, 255 folders, and 8 hierarchical levels. This unit can play back files recorded in VBR (variable bit rate). Files recorded in VBR have a discrepancy in the elapsed time display, and do not show the actual elapsed time. In particular, this difference becomes noticeable after performing the search function. This unit cannot play back the following files: MP3 files encoded in MP3i and MP3 PRO format. MP3 files encoded in an inappropriate format. MP3 files encoded with Layer 1/2.
WMA files encoded in lossless, professional, and voice format. WMA files which are not based upon Windows Media Audio. WMA files copy-protected with DRM. Files which have data such as AIFF, ATRAC3, etc. The search function works but search speed is not constant.
Ejecting a disc
If the ejected disc is not removed within 15 seconds, it is automatically inserted into the loading slot again to protect it from dust. Playback starts automatically.
If you change the AMP GAIN setting from HIGH POWER to LOW POWER while the volume level is set higher than VOLUME 30, the unit automatically changes the volume level to VOLUME 30.
What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Sound cannot be heard from the speakers. General Remedies/Causes Adjust the volume to the optimum level. Check the cords and connections. Reset the unit (see page 3). Check the SRC SELECT = AUX IN setting (see page 15). Store stations manually. Connect the aerial firmly. Check the SRC SELECT = AM setting (see page 15). Continued on the next page
The unit does not work at all. AUX IN cannot be selected.
SSM automatic presetting does not work. FM/AM Static noise while listening to the radio. AM cannot be selected.
19/9/08 2:56:36 PM
Remedies/Causes Insert the disc correctly. Insert a finalized CD-R/CD-RW. Finalize the CD-R/CD-RW with the component which you used for recording.
Disc cannot be played back. CD-R/CD-RW cannot be played back. Tracks on the CD-R/CD-RW cannot be skipped.
Disc can neither be played back nor ejected. Unlock the disc (see page 10). Eject the disc forcibly (see page 3). Disc sound is sometimes interrupted. Stop playback while driving on rough roads. Change the disc. Check the cords and connections. Insert a playable disc into the loading slot.
NO DISC appears on the display.
PLEASE and EJECT appear alternately on the display. Disc cannot be played back.
Press 0, then insert a disc correctly.
Use a disc with MP3/WMA tracks recorded in a format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. Add the extension code <.mp3> or <.wma> to the file names. Skip to another track or change the disc. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.)
Noise is generated. MP3/WMA playback
A longer readout time is required Do not use too many hierarchical levels and folders. (READING keeps flashing on the display). Tracks do not play back in the order you have intended them to play. The elapsed playing time is not correct. The playback order is determined when the files are recorded. This sometimes occurs during playback. This is caused by how the tracks are recorded on the disc. This unit can only display letters (upper case), numbers, and a limited number of symbols.
The correct characters are not displayed (e.g. album name).
Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
EN18-23_KD-R303_003A_f.indd 18 19/9/08 2:46:42 PM
How to clean the connectors
Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
To keep discs clean
A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. Do not use any solvents (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs.
To play new discs
New discs may have some rough spots around the inner and outer edges. If such a disc is used, this unit may reject the disc. To remove these rough spots, rub the edges with a pencil or ball-point pen, etc. Do not use the following discs:
Single CD (8 cm disc) Warped disc
Moisture may condense on the lens inside the unit in the following cases: After starting the heater in the car. If it becomes very humid inside the car. Should this occur, the unit may malfunction. In this case, eject the disc and leave the unit turned on for a few hours until the moisture has evaporated.
How to handle discs
When removing a disc from its Center holder case, press down the center holder of the case and lift the disc out, holding it by the edges. Always hold the disc by the edges. Do not touch its recording surface. When storing a disc in its case, gently insert the disc around the center holder (with the printed surface facing up). Make sure to store discs in cases after use.
Sticker and sticker residue Stick-on label
C-thru Disc (semitransparent disc)
Transparent or semitransparent parts on its recording area
10/9/08 9:50:05 AM
AUDIO AMPLIFIER SECTION Maximum Power Output: Continuous Power Output (RMS): Front/Rear: Front/Rear: 50 W per channel 19 W per channel into 4 , 40 Hz to Hz at no more than 0.8% total harmonic distortion. 4 (4 to 8 allowance) Bass: Treble: Frequency Response: Line-Out Level/Impedance: Output Impedance: Other Terminal: 12 dB at 100 Hz 12 dB at 10 kHz 40 Hz to Hz 2.5 V/20 k load (full scale) 1 k AUX (auxiliary) input jack
Load Impedance: Tone Control Range:
TUNER SECTION Frequency Range: FM: AM: FM Tuner Usable Sensitivity: 50 dB Quieting Sensitivity: Alternate Channel Selectivity (400 kHz): Frequency Response: Stereo Separation: MW Tuner Sensitivity: Selectivity: LW Tuner Sensitivity: 87.5 MHz to 108.0 MHz MW: 522 kHz to kHz LW: 144 kHz to 279 kHz 11.3 dBf (1.0 V/75 ) 16.3 dBf (1.8 V/75 ) 65 dB 40 Hz to Hz 30 dB 20 V 35 dB 50 V
EN18-23_KD-R303_003A_2.indd 20 20/8/08 11:30:56 AM
CD PLAYER SECTION Type: Signal Detection System: Number of Channels: Frequency Response: Dynamic Range: Signal-to-Noise Ratio: Wow and Flutter: MP3 Decoding Format: (MPEG1/2 Audio Layer 3) WMA (Windows Media Audio) Decoding Format: Compact disc player Non-contact optical pickup (semiconductor laser) 2 channels (stereo) 5 Hz to Hz 93 dB 98 dB Less than measurable limit Max. Bit Rate: 320 kbps Max. Bit Rate: 192 kbps
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Vous avez des PROBLMES de fonctionnement?
Rinitialisez votre appareil
Rfrez-vous la page intitule Comment rinitialiser votre appareil
Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of Victor Company of Japan, Limited is: JVC Technical Services Europe GmbH Postfach Friedberg Germany
Cher(e) client(e), Cet appareil est conforme aux directives et normes europennes en vigueur concernant la compatibilit lectromagntique et la scurit lectrique. Reprsentant europen de la socit Victor Company of Japan, Limited: JVC Technical Services Europe GmbH Postfach Friedberg Allemagne
EN, FR 2008 Victor Company of Japan, Limited
22/9/08 4:00:03 PM
DV-F727 LS-L1260CL AS285 3945S Alertegps G300 3SF-6C Xantia KX-TG8100PD HTS6500 TC-K808ES KDC-334SG World Tour DEH-1950 50 CM HT-THX25R Logitech G7 Dslr-A390 XB2000 ZDF 210 RX-V1200RDS 150 E CE119KFS E3350 HP 610 TA-P9000ES LD-2120WH P1100 LK-80 MD7000 Sg520 HDR-SR8E HK 3480 Waves GTR NN-K125mbbpq S1700 Bladesystem Urc-3050 W580IM RX-150 SCL860 LE40M5 Photosmart 8050 WFH1176F Processor Radiators Wfmc6400UC Ist D 250 X FAX-L380S SA-W505 Shine RAK25NH4 M187AST GR-DVL9000 41135 Inkjet 2300 SQ505X K32LED LE32A437t2D Yamaha HH65 42PB4DT-UB 4D-10B DVP-FX94 WD-60638 Slide 200 RS20nrhs Canoscan-3000EX Recorder 4 Vivitar 283 SM-230 D-LUX 5 TDM-7545R DEH-2100UB KX-TG5632M 37LC55 Total WAR Rs 550 KX-FC225E 82413 RMT-V128 Warmer Samsung J600 YP-S3jaby 50PG1000 DPF-D710 PM-7001KI N1B HT762PZ JBL L110 SDM-HS95 Vyper AIR FP222W 300 AE Camera EZ200 Meter DVX9900 - 2004 MFC-8660DN Control Unit HMS800TVE
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101