Reviews & Opinions
Independent and trusted. Read before buy JVC KS-F350R!

JVC KS-F350R

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
JVC KS-F350R, size: 1.0 MB
Related manuals
JVC KS-F350r Installation Manual
JVC KS-F350r Installation Manual

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

JVC KS-F350RAbout JVC KS-F350R
Here you can find all about JVC KS-F350R like manual and other informations. For example: review.

JVC KS-F350R manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a JVC KS-F350R please write about it to help other people.

 

[ Report abuse or wrong photo | Share your JVC KS-F350R photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
harlandavid1 10:48pm on Friday, October 22nd, 2010 
Good stuff Zero trouble whatsoever with it, works perfectly fine, sound quality is actually pretty good, on the mp3 decoder. Does what it says on the tin Bought this as a stop-gap replacement for an all singing all dancing unit - but will probably leave it fitted!
kosmic 7:27pm on Saturday, July 10th, 2010 
Ideal for my use Everything was in the box apart from a manual in English, however 2 mins on the PC and I had it.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

CASSETTE RECEIVER

CASSETTEN-RECEIVER RADIOCASSETTE RADIO/CASSETTESPELER

KS-FX453R

/I ATT

KS-FX450R

CD CHANGER CONTROL

MO/FIND SSM TP RDS

KS-F353R

KS-F350R

DETACHABLE CONTROL PANEL

MO SSM

MO SSM RDS PTY
For installation and connections, refer to the separate manual. Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesonderten Anleitung. Pour linstallation et les raccordements, se rfrer au manuel spar. Zie de afzonderlijke handleiding voor details aangaande het installeren en verbinden van het toestel.

INSTRUCTIONS

BEDIENUNGSANLEITUNG MANUEL DINSTRUCTIONS GEBRUIKSAANWIJZING

FSUN3101-311 [E]

COVER.453/450/353/350[E]311

99.11.9, 3:22 PM

NEDERLANDS
KS-FX453R/KS-FX450R KS-F353R/KS-F350R

FRANAIS

DEUTSCH

ENGLISH

Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit.

CONTENTS

BASIC OPERATIONS.. 3 RADIO BASIC OPERATIONS... 4 Listening to the radio... 4 Storing stations in memory.. 5 Tuning into a preset station... 7 RDS OPERATIONS.. 8 What you can do with RDS EON.. 8 Other convenient RDS functions and adjustments.. 14 TAPE OPERATIONS.. 16 Listening to a tape.. 16 SOUND ADJUSTMENTS.. 17 Selecting preset sound modes.. 17 Adjusting the sound... 18 Storing your own sound adjustments... 19 OTHER MAIN FUNCTIONS... 20 Setting the clock... 20 Changing the general settings.. 22 Detaching the control panel.. 25 CD CHANGER OPERATIONS (ONLY FOR KS-FX453R/KS-FX450R). 26 Playing CDs... 26 Selecting CD playback modes.. 28 MAINTENANCE.. 29 To extend the lifetime of the unit.. 29 TROUBLESHOOTING.. 30 SPECIFICATIONS.. 31
Note: For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on the units chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen. BEFORE USE * For safety. Do not raise the volume level too much, as this will block outside sounds, making driving dangerous. Stop the car before performing any complicated operations.
* Temperature inside the car. If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.
EN02-03KS-FX453/450/353/350[E]

99.11.9, 3:31 PM

BASIC OPERATIONS
Note: When you use this unit for the first time, set the built-in clock correctly, see page 20.

/ I /ATT

Turn on the power.
Note on One-Touch Operation: When you select tuner as a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. If the cassette is already in the cassette compartment, tape play starts automatically.

KS-FX453R KS-FX450R

KS-F353R KS-F350R

Play the source.

To operate the tuner, see pages 4 15. To operate the tape deck, see page 16. ONLY FOR KS-FX453R/KS-FX450R: To operate the CD changer, see pages 26 28.

AM AM CD CH

Adjust the volume.

Volume level appears.

Adjust the sound as you want (see pages 17 19).
To drop the volume in a moment
Press briefly while listening to any source. ATT starts flashing on the display, and the volume level will drop in a moment. To resume the previous volume level, press the button briefly again.

To turn off the power

Press for more than 1 second.

RADIO BASIC OPERATIONS

Listening to the radio
Note on One-Touch Operation: When you select a band in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.
Select the band (FM1, FM2, FM3 or AM).

FM1 FM2 FM3 AM

You can select any one of FM1, FM2, and FM3 to listen to an FM station.
Note: When a cassette is in the cassette compartment, you cannot select the tuner. Be sure to eject the cassette from the cassette compartment to listen to the radio.
Start searching a station.
When a station is received, searching stops.
To search stations of higher frequencies.
To search stations of lower frequencies.
To stop searching before a station is received, press the same button you have pressed for searching.
To tune in a particular frequency manually:
1 Select the band (FM or AM). Press FM or AM. or until M starts flashing on the display. 2 Press and hold Now you can manually change the frequency while M is flashing. or repeatedly until the frequency you want is reached. 3 Press If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM MW/LW) until you release the button. 4
EN04-07KS-FX453/450/353/350[E]
You can use one of the following two methods to store broadcasting stations in memory. Automatic preset of FM stations: SSM (Strong-station Sequential Memory) Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3).
Select the FM band number (FM1, FM2 or FM3) you want to store FM stations into.

FM1 FM2 FM3

KS-FX453R/KS-FX450R SSM
Press and hold both buttons for more than 2 seconds.

or KS-F353R/KS-F350R SSM

SSM appears, then disappears when automatic preset is over.
Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2 or FM3). These stations are preset in the number buttons No. 1 (lowest frequency) to No. 6 (highest frequency). When automatic preset is over, the station stored in number button 1 will be automatically tuned in. 5
Storing stations in memory

Manual preset

You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. EXAMPLE: Storing an FM station of 88.3 MHz into preset number 1 of the FM1 band

Select the FM1 band.

Tune into a station of 88.3 MHz.
See page 4 to tune into a station.
Press and hold the button for more than 2 seconds.
P1 flashes for a few seconds.
Repeat the above procedure to store other stations into other preset numbers.
Notes: A previously preset station is erased when a new station is stored in the same preset number. Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again. 6
You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see pages 5 and 6. DISP
MO/RND (for KS-FX453R/KS-FX450R) MO (for KS-F353R/KS-F350R)
Select the band (FM1, FM2, FM3 or AM) you want.
Select the number (1 6) for the preset station you want.
To change the display information while receiving an FM RDS station
Press DISP. Each time you press the button, the display changes as follows:
PS NAME (Station name) CLOCK (Clock time)
FREQ (Station frequency) PTY (Programme type)
When an FM stereo broadcast is hard to receive: Press MO/RND (mono/random: for KS-FX453R/KS-FX450R) or MO (mono: for KS-F353R/ KS-F350R) while listening to an FM stereo broadcast. The MO (mono) indicator lights up on the display. The sound you hear becomes monaural but reception will be improved.

MO/RND

Lights up when receiving an FM broadcast in stereo.

To restore the stereo effect, press the button again. 7
Tuning into a preset station

RDS OPERATIONS

What you can do with RDS EON
RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. For example, the station send their station names, as well as information about what type of programme they broadcast, such as sports or music, etc. Another advantage of RDS function is called EON (Enhanced Other Networks). The EON indicator lights up while receiving an FM station with the EON data. By using the EON data sent from a station, you can tune into a different station of a different network broadcasting your favorite programme or traffic announcement while listening to another programme or to another source such as tape. By receiving the RDS data, this unit can do the following: Tracing the same programme automatically (Network-Tracking Reception) Standby Reception of TA (Traffic Announcement) or your favorite programme PTY (Programme Type) search TP (Traffic Programme) search And some other functions
Tracing the same programme automatically (NetworkTracking Reception)
When driving in an area where FM reception is not good, the tuner built in this unit automatically tune in another RDS station, broadcasting the same programme with stronger signals. So, you can continue to listen to the same programme in its finest reception, no matter where you drive. (See the illustration on the next page.) Two types of the RDS data are used to make Network-Tracking Reception work correctly PI (Programme Identification) and AF (Alternative Frequency). Without receiving these data correctly from the RDS station you are listening to, NetworkTracking Reception will not operate.

KS-FX453R/KS-FX450R

TP RDS

or KS-F353R/KS-F350R

To use Network-Tracking Reception, press and hold TP/RDS (Traffic Programme/Radio Data System: for KS-FX453R/KSFX450R) or RDS (for KS-F353R/KS-F350R) for more than 1 second. Each time you press and hold the button, NetworkTracking Reception modes change as follows:

Mode 1

Mode 2

Mode 3

EN08-15.KS-FX453/450/353/350[E]

99.11.9, 3:32 PM

The AF indicator lights up but the REG indicator does not. Network-Tracking is activated with Regionalization set to off. Switches to another station within the same network when the receiving signals from the current station become weak. Note: In this mode, the programme may differ from the one currently received. Mode 2 Both the AF indicator and the REG indicator light up. Network-Tracking is activated with Regionalization set to on. Switches to another station, within the same network, broadcasting the same programme when the receiving signals from the current station become weak. Mode 3 Neither the AF indicator nor the REG indicator lights up. Network-Tracking is deactivated.

The same programme can be received on different frequencies.
Programme 1 broadcasting on frequency E Programme 1 broadcasting on frequency A
Programme 1 broadcasting on frequency B
Programme 1 broadcasting on frequency C
Programme 1 broadcasting on frequency D

Using Standby Reception

Standby Reception allows the unit to switch temporarily to your favorite programme (PTY: Programme Type) and Traffic Announcement (TA) from the current source another FM station and Tape (or CD: for KS-FX453R/KS-FX450R only). Note: Standby Reception will not work if you are listening to an AM station.

TA Standby Reception

When you press TP/RDS (for KS-FX453R/KS-FX450R) or TP (for KSF353R/KS-F350R) while listening to an FM station, the TP indicator is lit during reception of a TP (Traffic Programme) station and the TA standby mode is engaged. Note: When the station being received is not a TP station, the TP indicator flashes. Press or to engage the TA standby mode. SEARCH appears on the display, and TP station search starts. When a TP station is tuned in, the TP indicator is lit. If you are listening to a tape (or CD: for KS-FX453R/KS-FX450R only), and wish to listen to a TP station, press TP/RDS (for KS-FX453R/KS-FX450R) or TP (for KS-F353R/KS-F350R) to enter the TA standby mode. (The TP indicator lights up.) If a traffic programme starts broadcasting while the TA standby mode is active, TRAFFIC appears and the playback source changes to the FM band. The volume increases to the preset TA volume level and the traffic programme can be heard (see page 14). To deactivate the TA standby mode, press TP/RDS (for KS-FX453R/KSFX450R) or TP (for KS-F353R/KS-F350R) again.

or KS-F353R KS-F350R

PTY Standby Reception
When you press PTY while listening to an FM station, the PTY indicator is lit during reception of a PTY station and the PTY standby mode is engaged. The selected PTY name stored on page 12 flashes for 5 seconds. Note: When the station being received is not a PTY station, the PTY indicator flashes. Press or to engage the PTY standby mode. SEARCH appears on the display, and PTY station search starts. When a PTY station is tuned in, the PTY indicator is lit. If you are listening to a tape (or CD: for KS-FX453R/KS-FX450R only), and wish to listen to a selected PTY broadcast, press PTY to enter the PTY standby mode. (The PTY indicator lights up.) If the selected PTY programme starts broadcasting while the PTY standby mode is active, the selected PTY name appears and the playback source changes to the FM band. The selected PTY programme can then be heard.

To deactivate the PTY standby mode, press PTY again.
You can select your favorite programme for PTY Standby Reception to store in memory. When shipped from the factory, NEWS is stored as the programme type for PTY Standby Reception. 1, 4
Press and hold SEL (select) for more than 2 seconds to enter the general setting mode (see page 22).

KS-F353R/KS-F350R

Select PTY STBY (standby) if not shown on the display.
Select one of twenty-nine PTY codes. (See page 15.)
Selected code name appears on the display and is stored into memory.

Finish setting.

Searching Your Favorite Programme
You can search one of your 6 favorite programme types stored in memory. When shipped from the factory, the following 6 programme types have been stored in the number buttons (1 to 6). To change the factory preset settings, see page 12. To search your favorite programme, see page 13.
1 POP M 2 ROCK M 3 EASY M 4 CLASSICS 5 AFFAIRS 6 VARIED
Selecting Your Favorite Programme for PTY Standby Reception
To store your favorite programme types
Select PTY SRCH (search) if not shown on the display.
Selected code name appears on the display. If the code already stored in memory is selected, it will flash on the display.
Press and hold the number button for more than 2 seconds to store the PTY code selected into the preset number you want.
The selected code name will flash on the display.
Press and hold PTY (programme type) for more than 1 second while listening to an FM station.
The last selected PTY code appears.
Select one of PTY codes stored in preset number buttons (1 to 6).
Ex. When ROCK M is stored in preset number button 2.
PTY search for your favorite programme starts after 5 seconds. If there is a station broadcasting a programme of the same PTY code you selected, that station is tuned in. If there is no station broadcasting a programme of the same PTY code you selected, the station will not change. Note: In some areas, the PTY search will not work correctly. 13
To search your favorite programme type
Other convenient RDS functions and adjustments
Changing the display mode while listening to an FM station
You can change the initial indication on the display to station name (PS NAME), station frequency (FREQ), or clock time (CLOCK) while listening to an FM RDS station. See also Changing the general settings on page 22. 1. Press and hold SEL (select) for more than 2 seconds to call up the general setting mode. 2. Press or to select DISPMODE (display mode). 3. Press + or to set to the desired indication PS NAME (station name), FREQ (station frequency), or CLOCK (clock time). Note: By pressing DISP, you can also change the display while listening to an FM RDS station. Each time you press the button, the following information appears on the display:

* Then, the display goes back to the original indication in several seconds.
Setting the TA volume level
You can preset the volume level for TA Standby Reception. When a traffic programme is received, the volume level automatically changes to the preset level. See also Changing the general settings on page 22. 1. Press and hold SEL (select) for more than 2 seconds to call up the general setting mode. 2. Press or to select TA VOL (volume). 3. Press + or to the desired volume.
When shipped from the factory, the clock built in this unit is set to be readjust automatically using the CT (Clock Time) data in the RDS signal. If you do not want to use automatic clock adjustment, follow the procedure below. See also Changing the general settings on page 22. 1. Press and hold SEL (select) for more than 2 seconds to call up the general setting mode. 2. Press or to select AUTO ADJ (adjust). 3. Press to select ADJ OFF. Now automatic clock adjustment is canceled. To reactivate clock adjustment, repeat the same procedure and select ADJ ON in step 3 by pressing the + button. Note: It takes about 2 minutes to adjust the time using the CT data. So, you must tune to the station for more than 2 minutes continuously; otherwise, the clock time will not be adjusted.

PTY codes

NEWS: AFFAIRS: News Topical programmes expanding on current news or affairs INFO: Programmes which impart advice on a wide variety of topics SPORT: Sport events EDUCATE: Educational programmes DRAMA: Radio plays CULTURE: Programmes on national or regional culture SCIENCE: Programmes on natural science and technology VARIED: Other programmes like comedies or ceremonies POP M: Pop music ROCK M: Rock music EASY M: Easy-listening music LIGHT M: Light music CLASSICS: Classical music OTHER M: Other music WEATHER: Weather information FINANCE: Reports on commerce, trading, the Stock Market, etc. CHILDREN: Entertainment programmes for children SOCIAL: Programmes on social activities RELIGION: Programmes dealing with any aspect of belief or faith, or the nature of existence or ethics PHONE IN: Programmes where people can express their views either by phone or in a public forum TRAVEL: Programmes about travel destinations, package tours, and travel ideas and opportunities LEISURE: Programmes concerned with recreational activities such as gardening, cooking, fishing, etc. JAZZ: Jazz music COUNTRY: Country music NATION M: Current popular music from another nation or region, in that countrys language OLDIES: Classic pop music FOLK M: Folk music DOCUMENT: Programmes dealing with factual matters, presented in an investigative style

Automatic clock adjustment

TAPE OPERATIONS

Listening to a tape

Insert a cassette.

When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse)
Select the tape direction.
Press both buttons at the same time. Each time you press both buttons, the tape direction changes alternatively forward ( ) and reverse ( ).
To stop play and eject the cassette
Press 0. Tape play stops and the cassette ejects from the cassette compartment. You can hear the last received station (or CD playback from the CD changer: for KS-FX453R/ KS-FX450R). You can also eject the cassette with the unit turned off.

To fast-wind a tape

Press either or 1. The tape will be wound in the direction of the arrows ( or 1). To restart playback, press or 1 lightly.

Tape direction

EN16-16KS-FX453/450/353/350[E]

99.11.9, 3:33 PM

SOUND ADJUSTMENTS
You can select a preset sound adjustment suitable to the music genre.
Each time you press SOUND, the sound mode changes as follows.
Indication SCM OFF BEAT POP SOFT
For: Bass (Flat sound) Rock or disco music Light music Quiet background music 00 +2 +4 +1
Preset values Treble +Loudness On On Off Off
Notes: You can adjust the preset sound mode to your preference, and store it in memory. If you want to adjust and store your original sound mode, see Storing your own sound adjustments on page 19. To adjust only the bass and treble reinforcement levels to your preference, see Adjusting the sound on page 18. When one of the sound modes is selected, it is shown on the display as follows:
For example, when POP is selected.
EN17-19KS-FX453/450/353/350[E]
Selecting preset sound modes

Adjusting the sound

You can adjust the sound characteristics to your preference.
Select the item you want to adjust.
Indication BAS (Bass) TRE (Treble) FAD (Fader)* BAL (Balance)
To do: Adjust the bass Adjust the treble Adjust the front and rear speaker balance Adjust the left and right speaker balance
Range 6 (min.) +6 (max.) 6 (min.) +6 (max.) R6 (rear only) F6 (front only) L6 (left only) R6 (right only)
ON OFF LOUD Boost low and high frequencies to (Loudness) produce a well-balanced sound at low volume level. VOL (Volume) Adjust the volume 00 (min.) 50 (max.)
Note: * If you are using a two-speaker system, set the fader level to 00.

Adjust the level.

Press the + button to turn on the loudness function, and the button to turn it off. Note: Normally the + and buttons work as the volume control buttons. So you do not have to select VOL to adjust the volume level.

You can adjust the sound modes (BEAT, POP, SOFT: see page 17) to your preference and store your own adjustments in memory.
Call up the sound mode you want to adjust.

See page 17 for details.

Within 5 seconds

Select BAS, TRE or LOUD.

Adjust the bass or treble level or turn the loudness function ON/OFF.

See page 18 for details.

Press and hold SOUND until the sound mode you have selected in step 1 flashes on the display.
Your setting is stored in memory.
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 17. 19
Storing your own sound adjustments

OTHER MAIN FUNCTIONS

Setting the clock
You can also set the clock system either to 24 hours or 12 hours.

2, 3, 4 2, 3, 4

Press and hold SEL (select) for more than 2 seconds to enter the general setting mode. 2
Set the hour. 1 Select CLOCK H (Hour) if not shown on the display. 2 Adjust the hour.
Set the minute. 1 Select CLOCK M (Minute). 2 Adjust the minute.
EN20-25KS-FX453/450/353/350[E]

99.11.9, 3:34 PM

Set the clock system. 1 Select 24H/12H. 2 Select 24H or 12H.

Start the clock.

To check the current clock time (changing the display mode)
Press DISP repeatedly. Each time you press the button, the display mode changes as follows.
During tuner operation: For FM RDS stations See page 14. For AM and other FM stations

Frequency Clock

During tape operation:

Play mode Clock

During CD operation: ONLY FOR KS-FX453R/KS-FX450R
Clock Elapsed playing time Disc number
Changing the general settings
You can change the items listed on the next page to your preference.

Basic Procedure

Press and hold SEL (select) for more than 2 seconds to enter the general setting mode.
Select the item you want to adjust. (See page 23.)
Select or adjust the item selected above.
Finish the setting Factorypreset settings 0:00 24H ADJ ON PS NAME DISC NEWS (See page 11.) VOL (20) OFF See page
Select. CLOCK H CLOCK M 24H/12H AUTO ADJ DISPMODE CH DISP* PTY STBY PTY SRCH TA VOL TEL Hour adjustment Minute adjustment 24/12-hour time display Automatic setting of the clock Display mode Back Back 12H ADJ OFF PS NAME
Set. Advance Advance 24H ADJ ON FREQ
CLOCK Changer display PTY standby PTY search Traffic announcement volume Audio mute for cellular phone system TIME DISC

29 programme types (See page 15.) VOL (00-50) OFF MUTING 1 MUTING 2
ONLY FOR KS-FX453R/KS-FX450R.
Selecting the initial CD information display
(ONLY FOR KS-FX453R/KS-FX450R) You can select what type of the CD playback information to be initially shown on the display when you start playing a CD. When shipped from the factory, the disc number and track number information is selected to be shown. DISC: Disc number and track number appear on the display. TIME: Elapsed playing time appears on the display. 1. Press and hold SEL (select) for more than 2 seconds to call up the general setting mode. or 4 to select CH DISP (changer display). 2. Press 3. Press + or to select the desired mode. The initial CD information display changes as follows:
To see the other information while playing a CD, press DISP. Each time you press the button, the information changes alternately.
Selecting the telephone muting
This mode is used when a cellular phone system is connected. Depending on the phone system used, select either MUTING 1 or MUTING 2, whichever mutes the sounds from this unit. When shipped from the factory, this mode is deactivated. MUTING 1: Select this if this setting can mute the sounds. MUTING 2: Select this if this setting can mute the sounds. OFF: Cancels the telephone muting. 1. Press and hold SEL (select) for more than 2 seconds to call up the general setting mode. or to select TEL (telephone). 2. Press 3. Press + or to select the desired mode. The telephone muting mode changes as follows:

MUTING 1

MUTING 2
You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder.
How to detach the control panel
Before detaching the control panel, be sure to turn off the power.
How to attach the control panel
Unlock the control panel.
Insert the left side of the control panel into the groove on the panel holder.
Lift and pull the control panel out of the unit.
Press the right side of the control panel to fix it to the panel holder.
Put the detached control panel into the provided case.
Note on cleaning the connectors: If you frequently detach the control panel, the connectors will deteriorate. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.

Connectors

Detaching the control panel

CD CHANGER OPERATIONS

This section is ONLY FOR KS-FX453R/KS-FX450R, when used with a JVC CD automatic changer (separately purchased). We recommend that you use one of the CH-X series with your unit. If you have another CD automatic changer, consult your JVC IN-CAR ENTERTAINMENT dealer for connections. For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KS-U15K) for connecting it to this unit. Before operating your CD automatic changer: Refer also to the Instructions supplied with your CD changer. If no discs are in the magazine of the CD changer or the discs are inserted upside down, NO CD or NO DISC will appear on the display. If this happens, remove the magazine and set the discs correctly. If RESET 1 - RESET 8 appears on the display, something is wrong with the connection between this unit and the CD changer. If this happens, check the connection, connect the connecting cord(s) firmly if necessary, then press the reset button of the CD changer.

Playing CDs

Number buttons
Select the CD automatic changer.
Playback starts from the first track of the first disc. All tracks of all discs are played back.

Disc number

Track number
Note on One-Touch Operation: When you press CD-CH, the power automatically comes on. You do not have to press to turn on the power.
EN26-28KS-FX453/450/353/350[E]

99.11.9, 3:35 PM

To fast-forward or reverse the track
Press and hold track. , while playing a CD, to fast-forward the

Press and hold 4 track.

, while playing a CD, to reverse the
To go to the next tracks or the previous tracks
Press briefly, while playing a CD, to go ahead to the beginning of the next track. Each time you press the button consecutively, the beginning of the next tracks is located and played back. briefly, while playing a CD, to go back to the Press 4 beginning of the current track. Each time you press the button consecutively, the beginning of the previous tracks is located and played back.
To go to a particular disc directly
Press the number button corresponding to the disc number to start its playback (while the CD changer is playing). To select a disc number from 1 6: Press 1 (7) 6 (12) briefly. To select a disc number from 7 12: Press and hold 1 (7) 6 (12) for more than 1 second. Ex. When disc number 3 is selected
Selecting CD playback modes
To play back tracks at random (Random Play)
Each time you press MO/RND (mono/random) while playing a CD, CD random play mode changes as follows:

(Random1)

(Random2)

Cancelled

Mode RND1 RND2
RND Indicator Lights Flashes
Plays at random All tracks of the current disc, then the tracks of the next disc, and so on. All tracks of all discs inserted in the magazine.

MAINTENANCE

This unit requires very little attention, but you will be able to extend the life of the unit if you follow the instructions below.

To clean the heads

Clean the heads after every 10 hours of use using a wet-type head cleaning tape (available at an audio store). When the head becomes dirty, you may realize the following symptoms: Sound quality is reduced. Sound level decreases. Sound drops out. Do not play dirty or dusty tapes. Do not touch the highly-polished head with any metallic or magnetic tools.

To keep the tape clean

Always store the tapes to their storage cases after use. Do not store tapes in the following places: Subject to direct sunlight With high humidity At extremely hot temperatures
CAUTIONS: Do not play the tapes with peeling labels; otherwise, they can damage the unit. Tighten tapes to remove slack since loose tape may become entangled with the mechanism. Do not leave a cassette in the cassette compartment after use, as the tape may become slack.
EN29-31KS-FX453/450/353/350[E]
To extend the lifetime of the unit

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms
A cassette tape cannot be inserted. Cassette tapes become hot. Tape sound is at very low level and sound quality is degraded. Sound is sometimes interrupted. Sound cannot be heard from the speakers.

Causes

You have tried to insert a cassette in the wrong way. This is not a malfunction. The tape head is dirty.
Remedies Insert the cassette with the exposed tape facing right.
Clean it with a head cleaning tape.
Connections are not good.
Check the cords and connections. Adjust it to the optimum level.
The volume control is turned to the minimum level. Connections are incorrect.
Check the cords and connections. Store stations manually.
SSM (Strong-station Sequential Memory) automatic preset does not work. Static noise while listening to the radio. NO CD or NO DISC appears on the display.

Signals are too weak.

The antenna is not connected firmly. No CD is in the magazine. CDs are inserted incorrectly.
Connect the antenna firmly.
Insert CDs into the magazine. Insert them correctly. Connect this unit and the CD changer correctly and press the reset button of the CD changer. Press the reset button of the CD changer.
RESET 8 appears on the display.
This unit is not connected to a CD changer correctly.
RESET 1 RESET 7 appears on the display.

SPECIFICATIONS

Maximum Power Output: Front: 40 W per channel Rear: 40 W per channel Continuous Power Output (RMS): Front: 16 W per channel into 4 , 40 Hz to 20,000 Hz at no more than 0.8% total harmonic distortion. Rear: 16 W per channel into 4 , 40 Hz to 20,000 Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 (4 to 8 allowance) Tone Control Range Bass: 10 dB at 100 Hz Treble: 10 dB at 10 kHz Frequency Response: 40 Hz to 20,000 Hz Signal-to-Noise Ratio: 70 dB Line-Out Level/Impedance: KS-FX453R/KS-FX450R: 2.0 V/20 k load KS-F353R/KS-F350R: 1.0 V/20 k load Wow & Flutter: 0.15% (WRMS) Fast-Wind Time: 190 sec. (C-60) Frequency Response: 50 Hz to 14,000 Hz Signal-to-Noise Ratio: 52 dB Stereo Separation: 40 dB

GENERAL

Power Requirement Operating Voltage: DC 14.4 V (11 V to 16 V allowance) Grounding System: Negative ground Allowable Operating Temperature: 0 C to +40 C Dimensions (W H D) Installation Size: 182 mm 52 mm 150 mm Panel Size: 188 mm 58 mm 14 mm Mass: 1.3 kg (excluding accessories) Design and specifications subject to change without notice.

doc1

CASSETTE RECEIVER

CASSETTEN-RECEIVER RADIOCASSETTE RADIO/CASSETTESPELER

KS-FX453R

/I ATT

KS-FX450R

CD CHANGER CONTROL

MO/FIND SSM TP RDS

KS-F353R

KS-F350R

DETACHABLE CONTROL PANEL

MO SSM

MO SSM RDS PTY
For installation and connections, refer to the separate manual. Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesonderten Anleitung. Pour linstallation et les raccordements, se rfrer au manuel spar. Zie de afzonderlijke handleiding voor details aangaande het installeren en verbinden van het toestel.

INSTRUCTIONS

BEDIENUNGSANLEITUNG MANUEL DINSTRUCTIONS GEBRUIKSAANWIJZING

FSUN3101-311 [E]

COVER.453/450/353/350[E]311

99.11.9, 3:22 PM

NEDERLANDS
KS-FX453R/KS-FX450R KS-F353R/KS-F350R

FRANAIS

DEUTSCH

ENGLISH

Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit.

CONTENTS

BASIC OPERATIONS.. 3 RADIO BASIC OPERATIONS... 4 Listening to the radio... 4 Storing stations in memory.. 5 Tuning into a preset station... 7 RDS OPERATIONS.. 8 What you can do with RDS EON.. 8 Other convenient RDS functions and adjustments.. 14 TAPE OPERATIONS.. 16 Listening to a tape.. 16 SOUND ADJUSTMENTS.. 17 Selecting preset sound modes.. 17 Adjusting the sound... 18 Storing your own sound adjustments... 19 OTHER MAIN FUNCTIONS... 20 Setting the clock... 20 Changing the general settings.. 22 Detaching the control panel.. 25 CD CHANGER OPERATIONS (ONLY FOR KS-FX453R/KS-FX450R). 26 Playing CDs... 26 Selecting CD playback modes.. 28 MAINTENANCE.. 29 To extend the lifetime of the unit.. 29 TROUBLESHOOTING.. 30 SPECIFICATIONS.. 31
Note: For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on the units chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen. BEFORE USE * For safety. Do not raise the volume level too much, as this will block outside sounds, making driving dangerous. Stop the car before performing any complicated operations.
* Temperature inside the car. If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.
EN02-03KS-FX453/450/353/350[E]

99.11.9, 3:31 PM

BASIC OPERATIONS
Note: When you use this unit for the first time, set the built-in clock correctly, see page 20.

/ I /ATT

Turn on the power.
Note on One-Touch Operation: When you select tuner as a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. If the cassette is already in the cassette compartment, tape play starts automatically.

KS-FX453R KS-FX450R

KS-F353R KS-F350R

Play the source.

To operate the tuner, see pages 4 15. To operate the tape deck, see page 16. ONLY FOR KS-FX453R/KS-FX450R: To operate the CD changer, see pages 26 28.

AM AM CD CH

Adjust the volume.

Volume level appears.

Adjust the sound as you want (see pages 17 19).
To drop the volume in a moment
Press briefly while listening to any source. ATT starts flashing on the display, and the volume level will drop in a moment. To resume the previous volume level, press the button briefly again.

To turn off the power

Press for more than 1 second.

RADIO BASIC OPERATIONS

Listening to the radio
Note on One-Touch Operation: When you select a band in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.
Select the band (FM1, FM2, FM3 or AM).

FM1 FM2 FM3 AM

You can select any one of FM1, FM2, and FM3 to listen to an FM station.
Note: When a cassette is in the cassette compartment, you cannot select the tuner. Be sure to eject the cassette from the cassette compartment to listen to the radio.
Start searching a station.
When a station is received, searching stops.
To search stations of higher frequencies.
To search stations of lower frequencies.
To stop searching before a station is received, press the same button you have pressed for searching.
To tune in a particular frequency manually:
1 Select the band (FM or AM). Press FM or AM. or until M starts flashing on the display. 2 Press and hold Now you can manually change the frequency while M is flashing. or repeatedly until the frequency you want is reached. 3 Press If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM MW/LW) until you release the button. 4
EN04-07KS-FX453/450/353/350[E]
You can use one of the following two methods to store broadcasting stations in memory. Automatic preset of FM stations: SSM (Strong-station Sequential Memory) Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3).
Select the FM band number (FM1, FM2 or FM3) you want to store FM stations into.

FM1 FM2 FM3

KS-FX453R/KS-FX450R SSM
Press and hold both buttons for more than 2 seconds.

or KS-F353R/KS-F350R SSM

SSM appears, then disappears when automatic preset is over.
Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2 or FM3). These stations are preset in the number buttons No. 1 (lowest frequency) to No. 6 (highest frequency). When automatic preset is over, the station stored in number button 1 will be automatically tuned in. 5
Storing stations in memory

Manual preset

You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. EXAMPLE: Storing an FM station of 88.3 MHz into preset number 1 of the FM1 band

Select the FM1 band.

Tracing the same programme automatically (NetworkTracking Reception)
When driving in an area where FM reception is not good, the tuner built in this unit automatically tune in another RDS station, broadcasting the same programme with stronger signals. So, you can continue to listen to the same programme in its finest reception, no matter where you drive. (See the illustration on the next page.) Two types of the RDS data are used to make Network-Tracking Reception work correctly PI (Programme Identification) and AF (Alternative Frequency). Without receiving these data correctly from the RDS station you are listening to, NetworkTracking Reception will not operate.

KS-FX453R/KS-FX450R

TP RDS

or KS-F353R/KS-F350R

To use Network-Tracking Reception, press and hold TP/RDS (Traffic Programme/Radio Data System: for KS-FX453R/KSFX450R) or RDS (for KS-F353R/KS-F350R) for more than 1 second. Each time you press and hold the button, NetworkTracking Reception modes change as follows:

Mode 1

Mode 2

Mode 3

EN08-15.KS-FX453/450/353/350[E]

99.11.9, 3:32 PM

The AF indicator lights up but the REG indicator does not. Network-Tracking is activated with Regionalization set to off. Switches to another station within the same network when the receiving signals from the current station become weak. Note: In this mode, the programme may differ from the one currently received. Mode 2 Both the AF indicator and the REG indicator light up. Network-Tracking is activated with Regionalization set to on. Switches to another station, within the same network, broadcasting the same programme when the receiving signals from the current station become weak. Mode 3 Neither the AF indicator nor the REG indicator lights up. Network-Tracking is deactivated.
The same programme can be received on different frequencies.
Programme 1 broadcasting on frequency E Programme 1 broadcasting on frequency A
Programme 1 broadcasting on frequency B
Programme 1 broadcasting on frequency C
Programme 1 broadcasting on frequency D

Using Standby Reception

Standby Reception allows the unit to switch temporarily to your favorite programme (PTY: Programme Type) and Traffic Announcement (TA) from the current source another FM station and Tape (or CD: for KS-FX453R/KS-FX450R only). Note: Standby Reception will not work if you are listening to an AM station.

TA Standby Reception

When you press TP/RDS (for KS-FX453R/KS-FX450R) or TP (for KSF353R/KS-F350R) while listening to an FM station, the TP indicator is lit during reception of a TP (Traffic Programme) station and the TA standby mode is engaged. Note: When the station being received is not a TP station, the TP indicator flashes. Press or to engage the TA standby mode. SEARCH appears on the display, and TP station search starts. When a TP station is tuned in, the TP indicator is lit. If you are listening to a tape (or CD: for KS-FX453R/KS-FX450R only), and wish to listen to a TP station, press TP/RDS (for KS-FX453R/KS-FX450R) or TP (for KS-F353R/KS-F350R) to enter the TA standby mode. (The TP indicator lights up.) If a traffic programme starts broadcasting while the TA standby mode is active, TRAFFIC appears and the playback source changes to the FM band. The volume increases to the preset TA volume level and the traffic programme can be heard (see page 14). To deactivate the TA standby mode, press TP/RDS (for KS-FX453R/KSFX450R) or TP (for KS-F353R/KS-F350R) again.

or KS-F353R KS-F350R

PTY Standby Reception
When you press PTY while listening to an FM station, the PTY indicator is lit during reception of a PTY station and the PTY standby mode is engaged. The selected PTY name stored on page 12 flashes for 5 seconds. Note: When the station being received is not a PTY station, the PTY indicator flashes. Press or to engage the PTY standby mode. SEARCH appears on the display, and PTY station search starts. When a PTY station is tuned in, the PTY indicator is lit. If you are listening to a tape (or CD: for KS-FX453R/KS-FX450R only), and wish to listen to a selected PTY broadcast, press PTY to enter the PTY standby mode. (The PTY indicator lights up.) If the selected PTY programme starts broadcasting while the PTY standby mode is active, the selected PTY name appears and the playback source changes to the FM band. The selected PTY programme can then be heard.
To deactivate the PTY standby mode, press PTY again.
You can select your favorite programme for PTY Standby Reception to store in memory. When shipped from the factory, NEWS is stored as the programme type for PTY Standby Reception. 1, 4
Press and hold SEL (select) for more than 2 seconds to enter the general setting mode (see page 22).

KS-F353R/KS-F350R

Select PTY STBY (standby) if not shown on the display.
Select one of twenty-nine PTY codes. (See page 15.)
Selected code name appears on the display and is stored into memory.

Finish setting.

Searching Your Favorite Programme
You can search one of your 6 favorite programme types stored in memory. When shipped from the factory, the following 6 programme types have been stored in the number buttons (1 to 6). To change the factory preset settings, see page 12. To search your favorite programme, see page 13.
1 POP M 2 ROCK M 3 EASY M 4 CLASSICS 5 AFFAIRS 6 VARIED
Selecting Your Favorite Programme for PTY Standby Reception
To store your favorite programme types
Select PTY SRCH (search) if not shown on the display.
Selected code name appears on the display. If the code already stored in memory is selected, it will flash on the display.
Press and hold the number button for more than 2 seconds to store the PTY code selected into the preset number you want.
The selected code name will flash on the display.
Press and hold PTY (programme type) for more than 1 second while listening to an FM station.
The last selected PTY code appears.
Select one of PTY codes stored in preset number buttons (1 to 6).
Ex. When ROCK M is stored in preset number button 2.
PTY search for your favorite programme starts after 5 seconds. If there is a station broadcasting a programme of the same PTY code you selected, that station is tuned in. If there is no station broadcasting a programme of the same PTY code you selected, the station will not change. Note: In some areas, the PTY search will not work correctly. 13
To search your favorite programme type
Other convenient RDS functions and adjustments
Changing the display mode while listening to an FM station
You can change the initial indication on the display to station name (PS NAME), station frequency (FREQ), or clock time (CLOCK) while listening to an FM RDS station. See also Changing the general settings on page 22. 1. Press and hold SEL (select) for more than 2 seconds to call up the general setting mode. 2. Press or to select DISPMODE (display mode). 3. Press + or to set to the desired indication PS NAME (station name), FREQ (station frequency), or CLOCK (clock time). Note: By pressing DISP, you can also change the display while listening to an FM RDS station. Each time you press the button, the following information appears on the display:
* Then, the display goes back to the original indication in several seconds.
Setting the TA volume level
You can preset the volume level for TA Standby Reception. When a traffic programme is received, the volume level automatically changes to the preset level. See also Changing the general settings on page 22. 1. Press and hold SEL (select) for more than 2 seconds to call up the general setting mode. 2. Press or to select TA VOL (volume). 3. Press + or to the desired volume.

When shipped from the factory, the clock built in this unit is set to be readjust automatically using the CT (Clock Time) data in the RDS signal. If you do not want to use automatic clock adjustment, follow the procedure below. See also Changing the general settings on page 22. 1. Press and hold SEL (select) for more than 2 seconds to call up the general setting mode. 2. Press or to select AUTO ADJ (adjust). 3. Press to select ADJ OFF. Now automatic clock adjustment is canceled. To reactivate clock adjustment, repeat the same procedure and select ADJ ON in step 3 by pressing the + button. Note: It takes about 2 minutes to adjust the time using the CT data. So, you must tune to the station for more than 2 minutes continuously; otherwise, the clock time will not be adjusted.

PTY codes

NEWS: AFFAIRS: News Topical programmes expanding on current news or affairs INFO: Programmes which impart advice on a wide variety of topics SPORT: Sport events EDUCATE: Educational programmes DRAMA: Radio plays CULTURE: Programmes on national or regional culture SCIENCE: Programmes on natural science and technology VARIED: Other programmes like comedies or ceremonies POP M: Pop music ROCK M: Rock music EASY M: Easy-listening music LIGHT M: Light music CLASSICS: Classical music OTHER M: Other music WEATHER: Weather information FINANCE: Reports on commerce, trading, the Stock Market, etc. CHILDREN: Entertainment programmes for children SOCIAL: Programmes on social activities RELIGION: Programmes dealing with any aspect of belief or faith, or the nature of existence or ethics PHONE IN: Programmes where people can express their views either by phone or in a public forum TRAVEL: Programmes about travel destinations, package tours, and travel ideas and opportunities LEISURE: Programmes concerned with recreational activities such as gardening, cooking, fishing, etc. JAZZ: Jazz music COUNTRY: Country music NATION M: Current popular music from another nation or region, in that countrys language OLDIES: Classic pop music FOLK M: Folk music DOCUMENT: Programmes dealing with factual matters, presented in an investigative style
Automatic clock adjustment

TAPE OPERATIONS

Listening to a tape

Insert a cassette.

When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse)
Select the tape direction.
Press both buttons at the same time. Each time you press both buttons, the tape direction changes alternatively forward ( ) and reverse ( ).
To stop play and eject the cassette
Press 0. Tape play stops and the cassette ejects from the cassette compartment. You can hear the last received station (or CD playback from the CD changer: for KS-FX453R/ KS-FX450R). You can also eject the cassette with the unit turned off.

To fast-wind a tape

Press either or 1. The tape will be wound in the direction of the arrows ( or 1). To restart playback, press or 1 lightly.

Tape direction

EN16-16KS-FX453/450/353/350[E]

99.11.9, 3:33 PM

SOUND ADJUSTMENTS
You can select a preset sound adjustment suitable to the music genre.
Each time you press SOUND, the sound mode changes as follows.
Indication SCM OFF BEAT POP SOFT
For: Bass (Flat sound) Rock or disco music Light music Quiet background music 00 +2 +4 +1
Preset values Treble +Loudness On On Off Off
Notes: You can adjust the preset sound mode to your preference, and store it in memory. If you want to adjust and store your original sound mode, see Storing your own sound adjustments on page 19. To adjust only the bass and treble reinforcement levels to your preference, see Adjusting the sound on page 18. When one of the sound modes is selected, it is shown on the display as follows:
For example, when POP is selected.
EN17-19KS-FX453/450/353/350[E]
Selecting preset sound modes

Adjusting the sound

You can adjust the sound characteristics to your preference.
Select the item you want to adjust.
Indication BAS (Bass) TRE (Treble) FAD (Fader)* BAL (Balance)
To do: Adjust the bass Adjust the treble Adjust the front and rear speaker balance Adjust the left and right speaker balance
Range 6 (min.) +6 (max.) 6 (min.) +6 (max.) R6 (rear only) F6 (front only) L6 (left only) R6 (right only)
ON OFF LOUD Boost low and high frequencies to (Loudness) produce a well-balanced sound at low volume level. VOL (Volume) Adjust the volume 00 (min.) 50 (max.)
Note: * If you are using a two-speaker system, set the fader level to 00.

Adjust the level.

Press the + button to turn on the loudness function, and the button to turn it off. Note: Normally the + and buttons work as the volume control buttons. So you do not have to select VOL to adjust the volume level.
You can adjust the sound modes (BEAT, POP, SOFT: see page 17) to your preference and store your own adjustments in memory.

Call up the sound mode you want to adjust.

See page 17 for details.

Within 5 seconds

Select BAS, TRE or LOUD.

Adjust the bass or treble level or turn the loudness function ON/OFF.

See page 18 for details.

Press and hold SOUND until the sound mode you have selected in step 1 flashes on the display.
Your setting is stored in memory.
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 17. 19
Storing your own sound adjustments

OTHER MAIN FUNCTIONS

Setting the clock
You can also set the clock system either to 24 hours or 12 hours.

2, 3, 4 2, 3, 4

Press and hold SEL (select) for more than 2 seconds to enter the general setting mode. 2
Set the hour. 1 Select CLOCK H (Hour) if not shown on the display. 2 Adjust the hour.
Set the minute. 1 Select CLOCK M (Minute). 2 Adjust the minute.
EN20-25KS-FX453/450/353/350[E]

99.11.9, 3:34 PM

Set the clock system. 1 Select 24H/12H. 2 Select 24H or 12H.

Start the clock.

To check the current clock time (changing the display mode)
Press DISP repeatedly. Each time you press the button, the display mode changes as follows.
During tuner operation: For FM RDS stations See page 14. For AM and other FM stations

Frequency Clock

During tape operation:

Play mode Clock

During CD operation: ONLY FOR KS-FX453R/KS-FX450R
Clock Elapsed playing time Disc number
Changing the general settings
You can change the items listed on the next page to your preference.

Basic Procedure

Press and hold SEL (select) for more than 2 seconds to enter the general setting mode.
Select the item you want to adjust. (See page 23.)
Select or adjust the item selected above.
Finish the setting Factorypreset settings 0:00 24H ADJ ON PS NAME DISC NEWS (See page 11.) VOL (20) OFF See page
Select. CLOCK H CLOCK M 24H/12H AUTO ADJ DISPMODE CH DISP* PTY STBY PTY SRCH TA VOL TEL Hour adjustment Minute adjustment 24/12-hour time display Automatic setting of the clock Display mode Back Back 12H ADJ OFF PS NAME
Set. Advance Advance 24H ADJ ON FREQ
CLOCK Changer display PTY standby PTY search Traffic announcement volume Audio mute for cellular phone system TIME DISC
29 programme types (See page 15.) VOL (00-50) OFF MUTING 1 MUTING 2
ONLY FOR KS-FX453R/KS-FX450R.
Selecting the initial CD information display
(ONLY FOR KS-FX453R/KS-FX450R) You can select what type of the CD playback information to be initially shown on the display when you start playing a CD. When shipped from the factory, the disc number and track number information is selected to be shown. DISC: Disc number and track number appear on the display. TIME: Elapsed playing time appears on the display. 1. Press and hold SEL (select) for more than 2 seconds to call up the general setting mode. or 4 to select CH DISP (changer display). 2. Press 3. Press + or to select the desired mode. The initial CD information display changes as follows:

To see the other information while playing a CD, press DISP. Each time you press the button, the information changes alternately.
Selecting the telephone muting
This mode is used when a cellular phone system is connected. Depending on the phone system used, select either MUTING 1 or MUTING 2, whichever mutes the sounds from this unit. When shipped from the factory, this mode is deactivated. MUTING 1: Select this if this setting can mute the sounds. MUTING 2: Select this if this setting can mute the sounds. OFF: Cancels the telephone muting. 1. Press and hold SEL (select) for more than 2 seconds to call up the general setting mode. or to select TEL (telephone). 2. Press 3. Press + or to select the desired mode. The telephone muting mode changes as follows:

MUTING 1

MUTING 2
You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder.
How to detach the control panel
Before detaching the control panel, be sure to turn off the power.
How to attach the control panel
Unlock the control panel.
Insert the left side of the control panel into the groove on the panel holder.
Lift and pull the control panel out of the unit.
Press the right side of the control panel to fix it to the panel holder.
Put the detached control panel into the provided case.
Note on cleaning the connectors: If you frequently detach the control panel, the connectors will deteriorate. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.

Connectors

Detaching the control panel

CD CHANGER OPERATIONS

This section is ONLY FOR KS-FX453R/KS-FX450R, when used with a JVC CD automatic changer (separately purchased). We recommend that you use one of the CH-X series with your unit. If you have another CD automatic changer, consult your JVC IN-CAR ENTERTAINMENT dealer for connections. For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KS-U15K) for connecting it to this unit. Before operating your CD automatic changer: Refer also to the Instructions supplied with your CD changer. If no discs are in the magazine of the CD changer or the discs are inserted upside down, NO CD or NO DISC will appear on the display. If this happens, remove the magazine and set the discs correctly. If RESET 1 - RESET 8 appears on the display, something is wrong with the connection between this unit and the CD changer. If this happens, check the connection, connect the connecting cord(s) firmly if necessary, then press the reset button of the CD changer.

Playing CDs

Number buttons
Select the CD automatic changer.
Playback starts from the first track of the first disc. All tracks of all discs are played back.

Disc number

Track number
Note on One-Touch Operation: When you press CD-CH, the power automatically comes on. You do not have to press to turn on the power.
EN26-28KS-FX453/450/353/350[E]

99.11.9, 3:35 PM

To fast-forward or reverse the track
Press and hold track. , while playing a CD, to fast-forward the

Press and hold 4 track.

, while playing a CD, to reverse the
To go to the next tracks or the previous tracks
Press briefly, while playing a CD, to go ahead to the beginning of the next track. Each time you press the button consecutively, the beginning of the next tracks is located and played back. briefly, while playing a CD, to go back to the Press 4 beginning of the current track. Each time you press the button consecutively, the beginning of the previous tracks is located and played back.
To go to a particular disc directly
Press the number button corresponding to the disc number to start its playback (while the CD changer is playing). To select a disc number from 1 6: Press 1 (7) 6 (12) briefly. To select a disc number from 7 12: Press and hold 1 (7) 6 (12) for more than 1 second. Ex. When disc number 3 is selected
Selecting CD playback modes
To play back tracks at random (Random Play)
Each time you press MO/RND (mono/random) while playing a CD, CD random play mode changes as follows:

(Random1)

(Random2)

Cancelled

Mode RND1 RND2
RND Indicator Lights Flashes
Plays at random All tracks of the current disc, then the tracks of the next disc, and so on. All tracks of all discs inserted in the magazine.

MAINTENANCE

This unit requires very little attention, but you will be able to extend the life of the unit if you follow the instructions below.

To clean the heads

Clean the heads after every 10 hours of use using a wet-type head cleaning tape (available at an audio store). When the head becomes dirty, you may realize the following symptoms: Sound quality is reduced. Sound level decreases. Sound drops out. Do not play dirty or dusty tapes. Do not touch the highly-polished head with any metallic or magnetic tools.

To keep the tape clean

Always store the tapes to their storage cases after use. Do not store tapes in the following places: Subject to direct sunlight With high humidity At extremely hot temperatures
CAUTIONS: Do not play the tapes with peeling labels; otherwise, they can damage the unit. Tighten tapes to remove slack since loose tape may become entangled with the mechanism. Do not leave a cassette in the cassette compartment after use, as the tape may become slack.
EN29-31KS-FX453/450/353/350[E]
To extend the lifetime of the unit

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms
A cassette tape cannot be inserted. Cassette tapes become hot. Tape sound is at very low level and sound quality is degraded. Sound is sometimes interrupted. Sound cannot be heard from the speakers.

Causes

You have tried to insert a cassette in the wrong way. This is not a malfunction. The tape head is dirty.
Remedies Insert the cassette with the exposed tape facing right.
Clean it with a head cleaning tape.
Connections are not good.
Check the cords and connections. Adjust it to the optimum level.
The volume control is turned to the minimum level. Connections are incorrect.
Check the cords and connections. Store stations manually.
SSM (Strong-station Sequential Memory) automatic preset does not work. Static noise while listening to the radio. NO CD or NO DISC appears on the display.

Signals are too weak.

The antenna is not connected firmly. No CD is in the magazine. CDs are inserted incorrectly.
Connect the antenna firmly.
Insert CDs into the magazine. Insert them correctly. Connect this unit and the CD changer correctly and press the reset button of the CD changer. Press the reset button of the CD changer.
RESET 8 appears on the display.
This unit is not connected to a CD changer correctly.
RESET 1 RESET 7 appears on the display.

SPECIFICATIONS

Maximum Power Output: Front: 40 W per channel Rear: 40 W per channel Continuous Power Output (RMS): Front: 16 W per channel into 4 , 40 Hz to 20,000 Hz at no more than 0.8% total harmonic distortion. Rear: 16 W per channel into 4 , 40 Hz to 20,000 Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 (4 to 8 allowance) Tone Control Range Bass: 10 dB at 100 Hz Treble: 10 dB at 10 kHz Frequency Response: 40 Hz to 20,000 Hz Signal-to-Noise Ratio: 70 dB Line-Out Level/Impedance: KS-FX453R/KS-FX450R: 2.0 V/20 k load KS-F353R/KS-F350R: 1.0 V/20 k load Wow & Flutter: 0.15% (WRMS) Fast-Wind Time: 190 sec. (C-60) Frequency Response: 50 Hz to 14,000 Hz Signal-to-Noise Ratio: 52 dB Stereo Separation: 40 dB

GENERAL

Power Requirement Operating Voltage: DC 14.4 V (11 V to 16 V allowance) Grounding System: Negative ground Allowable Operating Temperature: 0 C to +40 C Dimensions (W H D) Installation Size: 182 mm 52 mm 150 mm Panel Size: 188 mm 58 mm 14 mm Mass: 1.3 kg (excluding accessories) Design and specifications subject to change without notice.

TUNER SECTION

Frequency Range FM: 87.5 MHz to 108.0 MHz AM: (MW) 522 kHz to 1,620 kHz (LW) 144 kHz to 279 kHz [FM Tuner] Usable Sensitivity: 11.3 dBf (1.0 V/75 ) 50 dB Quieting Sensitivity: 16.3 dBf (1.8 V/75 ) Alternate Channel Selectivity (400 kHz): 65 dB Frequency Response: 40 Hz to 15,000 Hz Stereo Separation: 30 dB Capture Ratio: 1.5 dB [MW Tuner] Sensitivity: 20 V Selectivity: 35 dB [LW Tuner] Sensitivity: 50 V 31

AUDIO AMPLIFIER SECTION

CASSETTE DECK SECTION
VICTOR COMPANY OF JAPAN, LIMITED

EN, GE, FR, NL

1199MNMMDWJEIN

 

Tags

Touch 735 Heartgold WV-7330 DSC-S700 LAV73639-W WT-R801 DSP-E200 M-3000U Afen 10 IM-DR80 Pops 120 KX-TC1811B Gpsmap 195 900-299011 PT-D5000 MC225 Factor FLS1072C DC 3400 V3000 SGH-D807 Nokia E73 Client YP-R0 SFX-111 BH-304 Review PDP-4270HD LE37A336j1D Gmini 500 MRV308 Telesfon Isdn Benq V551 KF-50SX200U Gateway DPX-3030S A7PRO Aspire-1650Z Notebook PC AV-28WFT1 5838-expressbake-bread-maker KX-TG1100NE DCT646-2 35 S PEG-TJ35 E2 ASF2643A PDA-5002 DP281B CS5111-3 Nokia 3300 Tusim Eazygo Easyshare C713 WF-T7015TP BB500 IC-F10 Polar S210 1420 Mp3 ROC2309 SRT2232S VGN-AR61ZU DVD-E232A UA46C7000WM AJP-6420 SA-DM3 KEH-P2033R ACD-21 Sedan Officejet 9130 Teil 1 Gigaset A250 P1192 Krups 962 PS42B451b2wxxc CL7200 47230 DVD-7500 FT-920 DTR300 VSX-519V-K M3027 MFP Kodak Z650 Observer TT Siemens M580 HT-SF100 576 VT X-970T PLC-XD2200 6310XI Decathlon DC4 C3300 Digital Switch SUP 016E DW-100 CDX-S2220 Mf4690PL STR-DG920 Tecra S4 M-CR603 DC-3185

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101