Heat sink Sumidero trmico Dissipateur de chaleur
Parts list for installation and connection
The following parts are provided for this unit. If anything is missing, contact your dealer immediately. Main unit Unidad principal Appareil principal
Lista de piezas para instalacin y conexin
Con esta unidad se suministran las siguientes piezas. Si hay algn elemento faltante, pngase inmediatamente en contacto con su concesionario. Power cord Cable de alimentacin Cordon dalimentation AV I/O cord Cable AV I/O Cordon AV E/S
Liste des pices pour linstallation et raccordement
Les pices suivantes sont fournies avec cet appareil. Si quelque chose manquait, contactez votre revendeur immdiatement. 5.1CH (LINE OUT) cord Cable 5.1CH (LINE OUT) Cordon 5.1CH (LINE OUT)
Reverse gear signal extension cord Conductor de la luz de marcha atrs Cordon prolongateur de signal de marche arrire

Sleeve Cubierta Manchon

Trim plate Placa de guarnicin Plaque dassemblage
Brackets Mnsulas Supports
Crimp connectors Conectores a presin Raccord sertir Flat head screws (M5 x 8 mmmm/M5 x 3/8) Tornillos de cabeza plana (M5 x 8 mm/M5 x 3/8 pulgada) Vis tte plate (M5 x 8 mm/M5 x 3/8 pouces) Round head screws (M2.6 x 3 mm/M2.6 x 1/8) Tornillos de cabeza esfrica (M2,6 x 3 mmM2,6 x 1/8 pulgada) Vis tte ronde (M2,6 x 3 mm/M2,6 x 1/8 pouces) Holder / Soporte / Support
Remote controller / Holder Control remoto / Soporte Tlcommade / Support Batteries Pilas Piles
Installing the remote controller Instalacin del control remoto Installation de la tlcommande
Remote controller Control remoto Tlcommade 1
Double-sided adhesive tape Cinta adhesiva de doble cara Ruban adhsif double-face
Instal1-3_KW-AVX800[J]_f.indd 1

07.2.13 11:08:15 PM

INSTALLATION (IN-DASH MOUNTING)
The following illustration shows a typical installation. However, you should make adjustments corresponding to your specific car. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. If you are not sure how to install this unit correctly, have it installed by a qualified technician.

CAMERA IN

To rear view camera / A la cmara de retrovisin / la camra de recul

L R L R

2nd AUDIO OUT VIDEO OUT LINE IN VIDEO IN

REVERSE GEAR SIGNAL

2nd monitor (KV-MR9010, etc.) 2do. monitor (KV-MR9010, etc.) Second moniteur (KV-MR9010, etc.)
Video cord (not supplied) Cable de vdeo (no suministrado) Cordon vido (non fourni)

OE REMOTE

Audio/video cords (not supplied) Cables de audio/vdeo (no suministrados) Cordon audio/vido (non fourni)
Cordless headphones (KS-HP2) Auriculares inalmbricos (KS-HP2) Casque dcoute sans fil (KS-HP2)
Navigation System or playback source Sistema de navegacin o fuente de reproduccin Systme de navigation ou source de lecture
Reverse gear signal extension cord *3 Conductor de la luz de marcha atrs *3 Cordon prolongateur de signal de marche arrire *3 Crimp connector Conectore a presin Raccord sertir To reverse lamp A la luz de marcha atrs Aux feux de recul
Reverse lamp Luz de marcha atrs Feux de recul
To car battery A la batera del automvil la batterie de la voiture
Reverse lamp lead Conductor de la luz de marcha atrs Fil des feux de recul
OE remote adapter (not supplied) Adaptador para control remoto OE (no suministrado) Adaptateur pour tlcommande au volant (non fourni)
Steering wheel remote controller (equipped in the car) Control remoto del volante de direccin (equipado en el vehculo) Tlcommande de volant (installe dans la voiture)
*3 Required only when connecting a rear view camera to CAMERA IN plug. *4 If your car is equipped with the steering wheel remote controller, you can operate this unit using the controller. For connection, an exclusive remote adapter (not supplied) which matches your car is required. For details, consult the same car audio dealer as where the unit is purchased.
*3 Requerido slo al conectar una cmara de retrovisin a la clavija CAMERA IN. *4 Si su vehculo est equipado con control remoto en el volante de direccin, podr hacer funcionar este receptor utilizando dicho control. Para la conexin, se requiere un adaptador remoto exclusivo (no suministrado) que sea adecuado para su automvil. Para los detalles, consulte con el concesionario car audio donde compr el receptor.
*3 Ncessaire uniquement lors de la connexion dune camra de recul la fiche CAMERA IN. *4 Si votre voiture est munie dune tlcommande de volant, vous pouvez commander cet autoradio en utilisant la tlcommande. Pour la connexion, un adaptateur de tlcommande exclusif (non fourni) correspondant votre voiture est requis. Pour en savoir plus, consultez le revendeur autoradio auprs duquel vous avez achet cet autoradio.
Instal4-6_KD-AVX800[J]_f.indd 1

07.2.15 8:45:38 PM

Connecting the external amplifiers
You can connect amplifiers to upgrade surround system in the car compartment. Connect the amplifiers to 5.1-ch analog discrete output plugs to enjoy multi-channel source. After you have connected the center speaker, make sure to activate the center speaker; otherwise, no sound comes out of the connected center speaker, see page 57 of the INSTRUCTIONS. You can supply the power to the amplifiers by connecting the remote leads (blue with white stripe) of this unit and amplifiers. (To connect more than one amplifier using the remote leads, Yconnectors need to be separately purchased.) Disconnect the speakers from the unit, and connect them to the amplifier. Leave the speaker leads of the unit unused.

07.2.13 10:04:23 PM

EN02-07_KW-AVX800E_f.indd 7
Before operating the unit
Cancel the display demonstration and set the clock ( pages 58 and 59 for details). Non-available items will be displayed being shaded on the AV Menu screens.

Set the clock settings.

Moves to the preceding menu page

Indication language:

In this manual, English indications are used for purpose of explanation. You can select the indication language on the monitor. ( page 59)
Moves to the succeeding menu page

Turn on the power.

Display <AV Menu>.
Display the <Setup> menu.

Finish the procedure.

Cancel the display demonstrations.

Select <Off>.

Return to the previous screen.
EN08-15_KW-AVX800E_f.indd 8

07.2.13 10:04:51 PM

Common operations
Selecting the playback source
Available sources depend on the external components you have connected, media you have attached, and the <Input> settings you have made ( pages 62 and 63).
Changing the display information
Available display information varies among the playback sources.

On the touch panel:

On the monitor panel only:
Each time you press DISP, the display changes to show the various information.
Ex. When the playback source is a DivX disc. Playback picture screen (only for video sources)

page 30

Source information screen

On the monitor panel:

Preset station (service) list, track (file) list, or phone number list

Animation screen

TUNER = DAB = DISC (DVD/VCD/CD) = SD = USB =CD-CH, iPod, D.PLAYER, or EXT-IN = Bluetooth PHONE = Bluetooth AUDIO = AV-IN = (back to the beginning) You cannot select these sources if they are not ready.

Back to the beginning

Navigation screen (When <Navigation> is selected for <AV Input>): ( page 62).

OPERATIONS

07.2.13 10:04:53 PM
EN08-15_KW-AVX800E_f.indd 9

Listening to the radio

Preset No. PS (station name) for FM RDS. If no PS signal is coming in, the tuned frequency appears.
Band Sound mode ( page 55) Tuner/Standby Reception indicators

PTY code for FM RDS

page 12
: Buttons on the touch panel. In the explanation, they are indicated inside [ ].

page 9

Press [SOURCE], then press [TUNER]. ] ( page 9) You can also use SOURCE on the monitor panel. Press it repeatedly. Press [BAND].
Press [4] or [] to search for a stationAuto Search. Manual Search: Hold either [4]or [] until Manual Search appears on the display, then press it repeatedly. The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength.
When an FM stereo broadcast is hard to receive

Press [AV MENU].

Reception improves, but stereo effect will be lost. The MONO indicator lights up. To restore stereo effect, select <Off>.

Press [Mode].

EN08-15_KW-AVX800E_f.indd 10

07.2.13 10:04:55 PM

This function works only for FM bands. Once you have activated this function (selected <Local>), it always works when searching for FM stations.

Display the Preset List.

Press [AV MENU]. Press [Mode].
Only stations with sufficient signal strength will be detected. The DX indicator goes off, then the LO indicator lights up.
Tune in to a station you want to preset.
FM station automatic presetting SSM (Strong-station Sequential Memory)
This function works only for FM bands. You can preset six stations for each band.

Select a preset number.

The station selected in step 2 is now stored in preset number 4. Local FM stations with the strongest signals are searched and stored automatically in the FM band.

07.2.13 10:04:56 PM

EN08-15_KW-AVX800E_f.indd 11
Tuning in to stations with sufficient signal strength

Manual presetting

Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band.
Selecting preset stations

On the remote:

The following features are available only for FM RDS stations.
Searching for FM RDS programmePTY Search
You can search for your favorite programmes being broadcast by selecting the PTY code for your favorite programmes.

On the unit:

Display <PTy Search> menu.
To select directly on the touch panel
To select from the Preset List
<PTy Search> menu can also be accessed by pressing [SHORT CUT] on the touch panel, then. page 55 page 14
EN08-15_KW-AVX800E_f.indd 12

07.2.13 10:04:58 PM

PTY Search starts. If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in.
Available PTY codes: News, Current Affairs, Information, Sport, Education, Drama, Cultures, Science, Varied Speech, Pop Music, Rock Music, Easy Listening, Light Classics M, Serious Classics, Other Music, Weather & Metr, Finance, Childrens Progs, Social Affairs, Religion, Phone In, Travel & Touring, Leisure & Hobby, Jazz Music, Country Music, National Music, Oldies Music, Folk Music, Documentary

Automatic station selection Programme Search
Usually when you select preset stations, the preset station is tuned in. If the signals from the FM RDS preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency broadcasting the same programme as the original preset station is broadcasting. ( page 62) The unit takes some time to tune in to another station using programme search.

07.2.13 10:05:02 PM

EN08-15_KW-AVX800E_f.indd 15
Tracing the same programme Network-Tracking Reception

Disc operations

The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends on its internal program). If a disc does not have any disc menu, all tracks in it will be played repeatedly until you change the source or eject the disc. If appears on the monitor, the unit cannot accept the operation you have tried to do. In some cases, without showing , operations will not be accepted.

Open the monitor panel.

Insert a disc.

Label side

<Open/Tilt> menu appears. Shaded icons cannot be used at that time. By pressing and holding the button, you can open the monitor panel and eject the disc.
Monitor panel closes automatically. If not, press [CLOSE].

Press [OPEN]. Caution:

Do not place your finger behind the monitor panel.
Caution on volume setting:
Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. 16 [OPEN]: Open the monitor panel. [EJECT]: Eject the disc. [CLOSE]: Close the monitor panel. [TILT +/]: Tilt the monitor panel. [Exit]: Erase this screen.
EN16-36_KW-AVX800E_f.indd 16

07.2.14 11:45:17 AM

DVD Video: Title no./Chapter no./Playing time DVD-VR: Program no. (or Playlist no.)/Chapter no./Play time
Disc type *1 Audio format Playback mode Speaker/signal indicators ( page 69)
Sampling frequency/Bit rate/Recorded signal channel no. Surround mode ( page 27)

page 22

: Buttons on the touch panel. In the explanation, they are indicated inside [ ]. These buttons also work when they are not shown on the touch panel (while watching pictures on the screen). Start and pause playback [3 / 8] [7] Stop playback [4 ] Press: Select chapter Hold: Reverse/forward search*2 [5 ] Select title/program/playlist
Group no./Track no./Playing time

pages 23 to 25 on how the operation buttons particularly work for a variety of the discs To erase the operations, touch the screen again. A * Touch the screen (center portion).
[SOURCE] Display the <Source Menu> [AV MENU] Display the <AV Menu> [SHORT CUT] Display the Short Cut buttons [3 / 8] Start and pause playback [7] Stop playback [4 ] Press: Select track Hold: Reverse/forward search [5 ] Select folders The above buttons also work when they are not shown on the touch panel (while watching pictures on the screen). * While a disc menu is played back for DVD, [KEY] is automatically displayed. On the disc menu, you can select a menu item directly by touching it on the screen.

Touch [KEY].

For DVD/VCD/DivX menu operation playback [5 ] Select the menu items [ENT] Confirm the selection [TOP MENU] Display the disc menu [MENU] Display the disc menu [RETURN] Return to the previous menu or display the menu (only for VCD with PBC)
For entering the numbers [DIRECT CLR] Switch between chapter/track entry and title/group/folder entry Erase the last entry when you enter a wrong number [0][9]=[ENT] Enter the number Ex. To enter 105: press [1], [0], [5], then [ENT]
EN16-36_KW-AVX800E_f.indd 20

07.2.15 10:46:52 AM

Selecting playback modes
Random You can use only one of the following playback modesIntro/Repeat/Random. Ex. To select Track Repeat
When one of the playback modes is selected, the corresponding indicator lights up on the source information screen. To cancel, select <Off>. Disc type Intro Repeat Chapter: Repeats current chapter Title: Repeats current title Track: Repeats current track
Track: Plays the first 15 seconds of each track (for VCD: PBC not in use)
Chapter: Repeats current chapter Program: Repeats current program (not available for Playlist playback). Track: Repeats current track*1 Disc (All): Randomly plays all (for VCD: PBC not in use) tracks (for VCD: PBC not in use)
Track: Plays the first 15 Track: Repeats current track*1 Folder: Randomly plays all seconds of each track Folder: Repeats all tracks of tracks of current folder, Folder: Plays the first 15 the current folder then tracks of next folders seconds of the first track of Disc (All): Randomly plays all each folder tracks Track: Repeats current track Folder: Repeats current folder Folder: Repeats current folder
*1 You can also use [SHORT CUT] to turn on and off Track Repeat 21

07.2.13 10:05:58 PM

EN16-36_KW-AVX800E_f.indd 21
Selecting tracks on the list
If a disc includes folders, you can display the Folder/ Track (File) Lists, then start playback.
Prohibiting disc ejection
You can lock a disc in the loading slot.

at the same time

Select a folder (1), then a track (2).

To cancel the prohibition, repeat the same procedure to select <EJECT OK?>.

Using Short Cut Icons

You can easily access the some frequently used functions by using [SHORT CUT] on the touch panel.
Selected track starts playing. (* Press to move to the previous/next pages of the list) 1 Current folder list number/total folder list number 2 Current track list number/total track list number of the current folder Track List can also be accessed by pressing DISP on the monitor panel.

For video software:

Aspect ratio ( page 59) Surround ( page 27) Sound mode ( page 55)

For audio software:

Turn on or off Track Repeat (Repeat play: page 21)
Selected track starts playing. 22
EN16-36_KW-AVX800E_f.indd 22

07.2.13 10:06:01 PM

Operations using the remote controllerRM-RK251
: : : : : Stop playback. Start playback/pause (if pressed during playback). Reverse/forward search*2. (No sound can be heard.) (Slow motion*3 during pause. No sound can be heard.) Press: Select chapter (during playback or pause). Hold: Reverse/forward search*4. Select title (during playback or pause). Using menu driven features Select an item you want to start play.
= = : Select chapter. Select title (when not playing). (twice) = = : Select title (during playback or pause). : Select aspect ratio. : Select audio language. : Select subtitle language. : Select view angle.
*1 Erases the misentry of the number. *2 Search speed: x2 ] x5 ] x10 ] x20 ] x60 *3 Slow motion speed: 1/32 ] 1/16 ] 1/8 ] 1/4 ] 1/2 *4 Search speed: x2 ] x10
Stop playback. Start playback/pause (if pressed during playback). : Reverse/forward search*2. : Press: Select track. Hold: Reverse/forward search*4. Select group. Using menu driven features : Select an item you want to start play.
= = : Select track. (twice) = = Select group. : Select aspect ratio. : Select audio stream.

07.2.13 10:06:03 PM

EN16-36_KW-AVX800E_f.indd 23

07.2.13 10:06:20 PM

EN16-36_KW-AVX800E_f.indd 29

Dual Zone operations

You can enjoy a disc playback on the external monitor connected to the VIDEO OUT and 2nd AUDIO OUT plugs, while listening to any other source than SD and USB through the speakers. When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller. To select a different source (main source) to listen through the speakers: Press SOURCE on the monitor panel. You cannot select SD and USB for the main source. By using the buttons on the monitor panel, you can operate the newly selected main source without affecting Dual Zone (DISC) operations.
When the main source is SD or USB, the DUAL button does not work.
Adjust the volume through the 2nd AUDIO OUT plug.
When the main source is SD or USB, DISC and DISC SURROUND cannot be displayed.
OFF: Deactivates Dual Zone. DISC: Activates Dual Zone without applying Headphone Surround*. DISC SURROUND: Activates Dual Zone and applies Headphone Surround*.
Operate the DVD/CD player.
* JVC original headphone virtual surround system. This surround will also work for the main source DISC if DISC SURROUND is selected as the sub-source. This surround does not work for DivX/MPEG1/MPEG2 discs.
Ex. When [DISC SURROUND] is selected.
EN16-36_KW-AVX800E_f.indd 30

07.2.13 10:06:24 PM

For discs except DVD and VCD: While Dual Zone is on, these operations are possible on the external monitor using the remote controller. The control screen automatically appears when you insert a disc. (For DivX/MPEG1/MPEG2/JPEG; while not playing.) When Dual Zone is off, you can only watch the control screen, but cannot operate it.
Select a folder or track. If necessary, press ENT to start playback.

Ex.: MP3/WMA

Ex.: CD Text
Current folder (highlighted bar) Current folder number/total folder number Folder list Selected playback mode ( page 32) Elapsed playing time of the current track (not displayed for JPEG) 6 Operation status 7 Current track number/total number of tracks in the current folder (total number of tracks on the disc) 8 Track information (only for MP3/WMA/WAV/AAC) 9 Track list p Current track (highlighted) * If tag data includes Jacket Picture (baseline JPEG), it will be displayed.
1 Playback mode selection window: appears when OSD is pressed ( page 32). 2 Selected playback mode ( page 32) 3 Elapsed playing time of the current track 4 Operation status 5 Current track number/total number of tracks on the disc 6 Track information 7 Track list 8 Current track (highlighted bar)

07.2.13 10:06:30 PM

EN16-36_KW-AVX800E_f.indd 33
You can use only one of the following playback modesIntro/Repeat/Random. Ex. To select Track Repeat
When one of the playback modes is selected, the corresponding indicator lights up on the source information screen. To cancel, select <Off>.

File type

Repeat

Random

Track: Plays the first 15 Track: Repeats current track *1 Folder: Randomly plays all seconds of each track Folder: Repeats all tracks of tracks of current folder, Folder: Plays the first 15 the current folder then tracks of next folders seconds of the first track of SD (All): Randomly plays all each folder tracks Folder: Repeats current folder *1 You can also use [SHORT CUT] to turn on and off Track Repeat.
EN16-36_KW-AVX800E_f.indd 34

07.2.13 10:06:32 PM

USB operations
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player *1, portable HDD, etc. to the unit.
USB cable from the rear of the unit You cannot connect a computer to the USB (

) terminal of the unit.

Press [SOURCE], then press [USB]. ( page 9)
You can also use SOURCE on the monitor panel. Press it repeatedly.
This unit can play the DivX/JPEG/MPEG1/MPEG2*2/ MP3/WMA/WAV/AAC*3 files stored in USB mass storage class device. You can operate the USB device in the same way you operate the files on discs (except OSD operation and those on the external monitor). ( page 18 to 28) All tracks in the USB device will be played repeatedly until you change the source. You cannot select USB when Dual Zone is in use. Make sure all important data has been backed up. *1 Except for JVC D. Player XA-HD500. *2 Except for MPEG2 files recorded by JVC Everio camcorder (extension code <.mod>). *3 This unit can play back AAC files encoded using iTunes. This unit cannot play back AAC files purchased from the iTunes Store.
Avoid using the USB device if it might hinder your safety driving. Do not pull out and attach the USB device repeatedly while Now Reading. is flashing on the monitor screen. Do not start the car engine if a USB device is connected. Stop playback before disconnecting a USB device. Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device.

07.2.13 10:06:33 PM

EN16-36_KW-AVX800E_f.indd 35
Track: Plays the first 15 Track: Repeats current track *1 Folder: Randomly plays all seconds of each track Folder: Repeats all tracks of tracks of current folder, Folder: Plays the first 15 the current folder then tracks of next folders seconds of the first track of USB (All): Randomly plays all each folder tracks Track: Repeats current track Folder: Repeats current folder Folder: Repeats current folder

File Type*5

Select playback file type when a disc/SD/USB contains different types of files. You can store this setting separately for each source DISC/ SD/USB. Audio: Plays back audio files. Picture: Plays back JPEG files. Video: Plays back DivX/MPEG1/MPEG2 files. (Not applicable to SD) This unit has its own Registration Code. Once you have played back a file with which the Registration Code recorded, this units Registration Code is overwritten for copyright protection. You can enjoy a powerful sound at a low volume level while playing Dolby Digital software. Auto: Select to apply the effect to multi-channel encoded software. On: Select to always use this function.
Divx Regist. (Registration)*5
D. (Dynamic) Range Compres. (Compression)*5
*5 Selectable only for DISC, SD, and USB. (Playback stops when you change the setting.)
EN55-67_KW-AVX800E_f.indd 60

07.2.13 10:08:14 PM

Menu items Speaker Size*5
Selectable settings, [reference page] You can adjust the speaker size setting. As you change the speaker size, the speaker on the screen changes its size. When <None> or <Off> is selected, the speaker is shaded. L/R (Front): Small, Large C (Center): None, Small, Large LS/RS (Surround): None, Small, Large SW (Subwoofer): On, Off Speaker size: <Large> for 13-cm diameter or more; <Small> for 13 cm or less. If you select <Large> or <Small> for non-connected speakers, the incoming signals for the non-connected speakers will not come out of any other speakers. Front speakers and surround speakers cannot be adjusted separately for left and right speakers. Regardless of the setting above. No sound comes out of the subwoofer while playing Dolby Pro Logic II Movie or Music if the front speaker is set to <Large>. No sound comes out of the center speaker when surround is deactivated.

Speaker Level*6

You can adjust the output level of the activated speakers ( <Speaker Size> above), monitoring the test tone. L/C/R/RS/SW*7/LS: adjust the output level of each speaker in the range of 10dB to +10dB; Initial 00dB. Press [Test] to turn on and off the test tone.

Speaker Distance*6, 8

You can adjust the speaker output timing. L/C/R/RS/LS: adjust the speaker distance from the listening position in the range of 15cm/6 inches to 600 cm/240 inches in 15-cm/6inch step; Initial 120 cm/48 inches (for center speaker), 150 cm/60 inches (for other speakers). Press [cminch] to change the measuring unitcm and inch.

*5 *6 *7 *8

Selectable settings, [reference page] For connecting an external component to the CD changer jack on the rear. Changer/iPod/D. player*14: CD changer, iPod, or D. player [44, 50] External: Any other than the above. [54] For connecting the Bluetooth adapter and DAB tuner, this setting is not required. It is automatically detected. Off: Cancels. On: Activates the key-touch tone. Off: Cancels. Muting1, Muting2: Select either one which mutes the sounds while using the cellular phone. Off: Cancels. On: When the ignition is turned off, the lamp on the flashes. button

Beep Telephone Muting*15

Others

Power LED Flash

TouchPanel Sens. Initialize
Change the sensitivity of the touch panel. As the number decreases, sensitivity become higher. 1/2/3; Initial 2 Initialize all settings you have made in <AV Menu>. Press and hold [Enter] to initialize the settings, then reset the unit ( page 3).
*13 Not selectable when the component connected to the CD changer jack is selected as the source. *14 The name of the component detected through the CD changer jack is shown. *15 The TEL MUTING lead connection is required. See Installation/Connection Manual (separate volume).

Disc Surround*16

Menu items Surround Surround Mode Panorama Center Width*17 Selectable settings, [reference page] On, Off, [27] Auto, Through, Dolby PLII Movie, Dolby PLII Music, [27] On, Off, [27] 00 to 07; Initial 04, [28]
*16 Selectable only for DISC, SD, and USB. *17 This setting takes effect only when the center speaker is activated.

07.2.13 10:08:22 PM

EN55-67_KW-AVX800E_f.indd 63

Equalizer ENGLISH

Flat/Hard Rock/R&B/Pop/Jazz/Dance/Country/Reggae/Classic/User1/User2/User3, [55]
Menu items Fader/Balance Selectable settings, [reference page] Adjust faderspeaker output balance between the front and rear speakers. Upmostfront only (F6) Downmostrear only (R6) When using a two-speaker system, set the fader to the center (0). Adjust balancespeaker output balance between the left and right speakers. Leftmostleft only (L6) Rightmostright only (R6) Adjust and store auto-adjustment volume level for each source, comparing to the FM volume level. The volume level will automatically increase or decrease when you change the source. 12 to +12; Initial 00 For Disc/SD/USB: An auto-adjustment level is commonly used when playing DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC files Select either <Normal> or <Reverse>, which reproduces a better sound.

Volume Adjust

How to handle discs

When removing a disc from its Center holder case, press down the center holder of the case and lift the disc out, holding it by the edges. Always hold the disc by the edges. Do not touch its recording surface. When storing a disc into its case, gently insert the disc around the center holder (with the printed surface facing up). Make sure to store discs into the cases after use.

To play new discs

New discs may have some rough spots around the inner and outer edges. If such a disc is used, this unit may reject the disc. To remove these rough spots, rub the edges with a pencil or ball-point pen, etc. Do not use the following discs:
Warped disc Sticker Sticker residue

Stick-on label

EN68-74_KW-AVX800E_f.indd 68

07.2.13 10:15:22 PM

More about this unit

General

Turning on the power
By pressing SOURCE on the monitor panel, you can also turn on the power. If the source is ready, playback starts. Speaker/signal indicators for DVD
Speaker indicators Signal indicators
Storing stations in memory
When SSM is over, received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency). The speaker indicatorssquare around the letters lights in light blue when the corresponding speakers are set to <Large> or <Small>. The center speaker indicatorsquare around C lights in light blue, when the center speaker is set to <Large> or <Small> and when surround is activated. Sounds come out of the speakers whose speaker indicators are lit. The SW indicator lights up when <SW (Subwoofer)> is set to <On>. The signal indicators indicate the incoming signalsL (front left) / R (front right) / C (center) / LFE (low frequency effect) / LS (left surround) / RS (right surround) / S (monaural surround). If the speaker is activated, but the signals corresponding to the speaker are not coming in, the signal indicators changes their color from white to black to indicate no signals coming in. Changing the source If you change the source with Dual Zone deactivated, playback also stops without ejecting the disc. Next time you select DISC for the playback source, disc play starts from where it has been stopped previously.

ST SU SW TA TE TG TH TI TK TL TN TO TR TS TT TW UK UR UZ VI VO WO XH YO ZU Sesotho Sundanese Swahili Tamil Telugu Tajik Thai Tigrinya Turkmen Tagalog Setswana Tonga Turkish Tsonga Tatar Twi Ukrainian Urdu Uzbek Vietnamese Volapuk Wolof Xhosa Yoruba Zulu

2.5 kHz

6.3 kHz

150 Hz

400 Hz

15 kHz

Sound mode
Flat R&B Pop Jazz Dance Country Reggae Classic User 1/2/3

Preset equalizing values

About sounds reproduced through the rear terminals
Speaker out/analog discrete outputLINE OUT (FRONT/REAR)/CENTER OUT/SUBWOOFER: Multi-channel signals are emitted for a multichannel encoded software. (When Dual Zone is activated, the signal emitted through 2nd AUDIO OUT plugs are emitted for the main source DISC.) 2nd AUDIO OUT: 2-channel signal is emitted when Dual Zone is activated. When playing a multi-channel encoded disc, multi-channel signals are downmixed (except for some DVD Audio).
Hard Rock +03 +03 +01 +03 +02 ++00 00

+02 +01

+01 +01 +03 +01 +01 +02
+03 +02 +01 +01 +01 +03 +02 +04 +02 +02 +01 ++01 +00 +01 +02 ++01 +02 +02 +03

+02 +03 +01

EN68-74_KW-AVX800E_f.indd 74

07.2.13 10:15:36 PM

Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center. For operations with the external components, refer also to the instructions supplied with the adapters used for the connections (as well as the instructions supplied with the external components). Symptoms No sound comes out of the center speaker. Remedies/Causes Center speaker is not activated. ( page 61) Center speaker is used only for surround playback. No sound comes out for stereo playback.
No sound comes out of the rear speakers, and Rear speakers and subwoofer are not activated. ( subwoofer. page 61) When Dual Zone is in use, this is normal with <Off> selected for <Rear Speaker>. ( page 64) No sound comes out of the subwoofer while This happens while playing some discs with <Auto> playing in stereo. selected for <Surround Mode> ( page 27). Cancel surround. The monitor is not clear and legible. Sunshine from the windscreen may cause this symptom. Adjust <Bright>. ( page 58) You cannot select SD and USB as the Deactivate Dual Zone. ( page 30) source. (While Dual Zone is activated, you cannot select them as the source.) The remote controller does not work. Deactivate Dual Zone. ( page 30) (While Dual Zone is activated, the remote controller only functions for operating the DVD/CD player.) Position Error Push Open Key appears on The monitor panel angle has been forcibly adjusted, or its the monitor. adjustment has been interrupted while opening or closing. Press OPEN/TILT (CLOSE). Mecha Error Push Reset appears on the Reset the unit ( page 3). monitor, and the panel does not move. SD Loading Error appears on the monitor. SD is not inserted fully. Fully insert it into the slot to close the monitor panel.

EN75-81_KW-AVX800E_f.indd 78

07.2.13 10:09:31 PM

Symptoms Reset 08 appears on the monitor. CD changer Reset 01 Reset 07 appears on the monitor. The CD changer does not work at all. No DAB Signal appears on the monitor. Reset 08 appears on the monitor. DAB tuner The DAB tuner does not work at all. Antenna Power NG appears on the monitor. The iPod/D. player does not turn on or does not work. Sound is distorted. Disconnect appears on the monitor. For iPod: Playback stops. iPod/D. player No sound can be heard. Error 01 appears on the monitor when connecting a D. player. No Files or No Track appears on the monitor. Reset 01 Reset 07 appears on the monitor. Reset 08 appears on the monitor. The iPods or D. players controls do not work after disconnecting from this unit. No picture appears on the monitor.

Remedies/Causes

Reset the unit. ( page 3) Move to an area with stronger signals. Connect this unit and the DAB tuner correctly, then reset the unit. ( page 3) Connect this unit and the DAB tuner correctly, then reset the unit. ( page 3) Check the cords and connections. Check the connecting cable and its connection. Charge the battery. For D. player: Update the firmware version. Deactivate the equalizer either on this unit or the iPod/ D. player. Check the connecting cable and its connection. The headphones are disconnected during playback. Restart playback. Disconnect the D. player from the adapter. Then, connect them again. No tracks are stored. Import tracks to the iPod or D. player. Disconnect the adapter from both this unit and iPod/ D. player. Then, connect them again. Check the connection between the adapter and this unit. Reset the iPod or D. player. Turn on the video component if it is not on. This unit is not connected to the video component correctly. Connect it correctly. Adjust items in <Picture Adjust>. ( page 58)
Playback picture is not clear and legible.

07.2.13 10:09:32 PM

EN75-81_KW-AVX800E_f.indd 79
Connect this unit and the CD changer correctly and press the reset button of the CD changer. Press the reset button of the CD changer.

Specifications

Maximum Power Output: Continuous Power Output (RMS): Load Impedance: Equalizer Control Range: Front/Rear: Front/Rear: 50 W per channel 20 W per channel into 4 , 40 Hz to Hz at no more than 0.8% total harmonic distortion 4 (4 to 8 allowance) 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, 15 kHz 10 dB 70 dB 5.0 V/20 k load (full scale) 1 k PAL 1 Vp-p/75 LINE IN, VIDEO IN, CAMERA IN, USB input terminal, Aerial input 2nd AUDIO OUT, VIDEO OUT CD changer, OE REMOTE 87.5 MHz to 108.0 MHz (MW) (LW) 522 kHz to kHz 144 kHz to 279 kHz