Reviews & Opinions
Independent and trusted. Read before buy JVC MX-K3R!

JVC MX-K3R

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
JVC MX-K3R, size: 1.5 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

JVC MX-K3RAbout JVC MX-K3R
Here you can find all about JVC MX-K3R like manual and other informations. For example: review.

JVC MX-K3R manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a JVC MX-K3R please write about it to help other people.

 

[ Report abuse or wrong photo | Share your JVC MX-K3R photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 5. Page 1 of 1. Average Rating:
almabuz 9:24am on Friday, October 8th, 2010 
iPod Touch Sreeen Protector After installing this plastic sheet over the screen on my iPod touch. I love it! I thought it would be difficult to apply, but it was not. No bubbles or any other problems. I recommend it.
shayz 3:57pm on Thursday, September 23rd, 2010 
Recently as we all know will have been submitted by the owner of Apple, a new and large number of iPods. The iPod touch 32 GB: Hi, the iPod touch is a really great device. This iPod has many features and works great. Reviews about Apple iPod touch 32 GB: Large memory no Disadvantages The 32GB iPod is an audio player with the ability to play MP3/MP4, AIFF audio and audio files.
mowa 9:09pm on Saturday, September 4th, 2010 
This was not an IPOD touch. Cheap MP3 player.This was a xmas present that I will have to buy elsewhere. This is an AMAZING product. It plays music,videos. I can say its a very good gadget with so many features. The picture viewer with touch screen and zoom function is amazing.
Al Su 12:47am on Tuesday, August 17th, 2010 
This iPod is far and away better than any MP3 player available. It feels solid, touch screen actually works as it should instead of having to poke.
Hanswurst 1:54am on Friday, July 30th, 2010 
This screen protector is definitely worth the extra money. Although I thought installation was going to be stressful, it was actually pretty easy.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Handle batteries properly.
t To avoid battery leakage or explosion: Remove batteries when the Remote Control will not be used for a long time. When you need to replace the batteries, replace both batteries at the same time with new ones. Do not use an old battery with a new one. Do not use different types of batteries together.

Using the Remote Control

The Remote Control makes it easy to use many of the functions of the System from a distance of up to 7m (23 feet) away. You need to point the Remote Control at the remote sensor on the Systems front panel.

Remote sensor

C L AS S I C
REC START CD /STOP REC START DUBBING
MX-K1R&MX-K3R(B).book Page 4 Friday, March 23, 2001 9:49 AM
Make all connections before plugging the System into an AC power outlet.
Connecting the FM Antenna English
Using the Supplied Wire Antenna

AUX IN

CAUTION: SPEAKER IMPEDANCE 6 SPEAKERS

ANTENNA

AM EXT AM LOOP FM75 COAXIAL

16 OHMS.

FM wire antenna (supplied)

RIGHT GND

Using the Coaxial Type Connector (Not supplied)
A 75-ohm antenna with coaxial type connector (IEC or DIN45 325) should be connected to the FM 75-ohm COAXIAL terminal.
If reception is poor, connect the outdoor antenna.
FM outdoor antenna (Not supplied)

Coaxial cable

Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outdoor antenna), disconnect the supplied FM Wire Antenna
MX-K1R&MX-K3R(B).book Page 5 Friday, March 23, 2001 9:49 AM
Connecting the AM (MW/LW) Antenna

Rear Panel of the Unit

Turn the loop until you have the best reception.
AM (MW/LW) loop antenna (Supplied)

AM EXT

AM LOOP

FM 75 COAXIAL

Attach the AM (MW/LW) loop to its base by snapping the tabs on the loop into the slot in the base.
AM (MW/LW) antenna wire (not supplied) If reception is poor, connect the outside antenna.
Even when connecting an outside AM (MW/LW) antenna, keep the indoor AM (MW/LW) loop connected.

To avoid noise, keep antennas away from the System, the connecting cord and the AC power cord.
Connecting the Speakers English
1. Open each of the terminals to connect the speaker wire leads. 2. Connect the speaker cords to the Speaker terminals of the Unit. Connect the red (+) and black () wires of the right side speaker to the red (+) and black () terminals marked RIGHT on the System. Connect the red (+) and black () wires of the left side speaker to the red (+) and black () terminals marked LEFT on the System. 3. Close each of the terminals to securely connect the cords.
Right side (rear view) Red

Left side (rear view)

CAUTIONS:
A TV may display irregular colors if located near the speakers. If this happens, set the speakers away from the TV. Use speakers with the correct impedance only. The correct impedance is indicated on the rear panel.
MX-K1R&MX-K3R(B).book Page 6 Friday, March 23, 2001 9:49 AM
Connecting External Equipment
Connect a signal cord (not supplied) between the Systems AUX-IN terminals and the output terminals of the external MD recorder, tape deck, etc. You can then listen to the external source through the System.
Signal cord (not supplied)
MD recorder, tape deck, etc. (not supplied)

Pin-plug x 2

Connecting to the Wall Outlet English
Plug the AC power cord into the wall outlet. Now, your System is at your command!

DEMO Mode

When the System is connected to the wall outlet, a DEMO mode displaying some of the systems features automatically starts. To turn the DEMO display off, press any of the operation buttons. The DEMO display automatically stops. To turn the DEMO display on, press the DEMO button on the Unit for more than 2 seconds.

(For 2 seconds)

The DEMO display will automatically turn on again if no button operation is made for 2 minutes. To cancel this auto DEMO display function, press the CANCEL button on the Unit during DEMO display.

COMPU Play

JVCs COMPU PLAY feature lets you control the most frequently used System functions with a single touch. With One Touch Operation you can play a CD, a tape, turn on the radio, or listen to an external equipment with a single press of the play button for that function. One Touch Operation turns the power on for you, then starts the function you have specified. If the System is not ready (no CD or tape in place), the System still powers on so you can insert a CD or tape. How One Touch Operation works in each case is explained in the section dealing with that function. The COMPU PLAY buttons are:

On the Unit

CD 6 button FM/AM button TAPE 3 button AUX button CD1, CD2 and CD 3 buttons CD Open/Close 0 button

On the Remote Control

CD 6 button FM/AM button TAPE 3 button AUX button CD1, CD2 and CD 3 buttons

English 6

MX-K1R&MX-K3R(B).book Page 7 Friday, March 23, 2001 9:49 AM

Basic Operations

REMOTE CONTROL
% Display STANDBY indicator % ECO PHONES

Numeric keys

FM MODE

FM /AM

SOUND MODE VOLUME
PROGRAM /RANDOM REPEAT TAPE A/B

CD 1 CD 2 CD 3

VOLUME +, FADE MUTING

Various information

BASS S.MODE
BASS indicator Sound Mode indicator

Level bar

Status bar (Indicates various statuses.)
* When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.
Turning the Power On and Off

Turning the System On

ECO Mode (ECO)
The System has three energy modes; power on, power off (Standby) and ECO. In ECO mode, the display goes off and the least power is consumed. To enter ECO mode, press the ECO button on the Unit in Standby mode (while the STANDBY indicator lights up). ECO MODE appears on the display, then the display goes off. The STANDBY indicator remains lit. To cancel ECO mode and turn on the power, press the % button for a second. To cancel ECO mode and enter Standby mode, press the ECO button again for a second.

Press the %_ button.

The display comes on and WELCOME is displayed once. The STANDBY indicator goes out. The System comes on ready to continue in the mode it was in when the power was last turned off. For example, if the last thing you were doing was listening to a CD, you are now ready to listen to a CD again. If you wish, you can change to another source. If you were listening to the Tuner last, the Tuner comes on playing the station it was last set to.

Tuning In a Station

Press the FM/AM button.
The Band and Frequency you were last tuned to appear on the display. (If the last station was selected using the preset number, the preset number appears first.) Each time you press the button, the band alternates between FM and AM (MW/LW).
Manual Tuning Briefly press the 22 or button on the Unit to move from frequency to frequency until you find the station you want. OR Auto Tuning If you hold down the 22 or button on the Unit for 0.5 second or more and then release it, the frequency changes down, or up, automatically until a station is found. OR Preset Tuning (Possible only after presetting stations) Preset tuning using the Unit: Select the preset number you want, using the 4 or button.

Example:

Press the button until the preset number P-12 appears on the display. After 2 seconds, the display will show the preset numbers band and frequency.

DISPLY MODE

(After 2 seconds)

(on the Unit)

(on the Remote Control)
Select a station using one of the following methods.
Preset tuning using the Remote Control: Enter the preset number you want to recall using the numeric keys. See Entering the Number with the Remote Control on page 8.
Press +10, then 2 to recall the preset number 12. After 2 seconds, the display will show the preset numbers band and frequency.
MX-K1R&MX-K3R(B).book Page 10 Friday, March 23, 2001 9:49 AM
In AM (MW/LW) broadcast, reception sensitivity will be changed by turning the AM loop antenna. Turn the AM (MW/LW) loop antenna for best reception.
Even if the System is unplugged or if the power failure occurs, the preset stations will be stored for a few days. However, in case the preset stations are erased, you will need to preset the stations again.

Presetting Stations

You can preset up to 30 FM stations and up to 15 AM (MW/LW) stations.
To Change the FM Reception Mode
When you are tuned in to an FM stereo broadcast, the ST (Stereo) indicator lights up and you can hear stereo effects. If an FM stereo broadcast is hard to receive or noisy, you can select Monaural mode. Reception improves, but you lose stereo effect. Press the FM MODE button on the Remote Control so that the MONO indicator lights up on the display.

While the CD Player is stopped, press the CD Open/Close 0 button on the Unit to open the tray. Remove the CD, then press the DISC SKIP button on the Unit.
The tray turns for the next CD.
Repeat step 2 to remove all the CDs. Press the CD Open/Close Unit to close the tray.

0 button on the

To Load CDs
Press the CD Open/Close Unit to open the tray.
t You can remove CDs while listening to the other source.
Place a CD, with its label side up, onto the tray.
Be sure that the CD is securely seated on the disc tray.

With the label side up

You can also remove the CDs during playback. However, in this case, you can only remove the CDs that are not being played back.
Press the DISC SKIP button on the Unit and place the next CD.
When you press the button, the tray turns for the next CD.
Repeat step 3 for the last CD. Press the CD Open/Close Unit.

The tray is closed.

MX-K1R&MX-K3R(B).book Page 16 Friday, March 23, 2001 9:49 AM
Basics of Using the CD PlayerNormal Play

To Play CDs

Removing/changing the CDs during playback While playing back a CD (e.g. CD-1), you can remove or change the other CDs (e.g. CD-2 and CD-3) by pressing the CD Open/ Close 0 button. After removing or changing, press the same button to close the tray.

To Select a Track

Load CDs. Press one of the Disc button (CD1-CD3) you want to play.
The selected disc number (e.g. CD-1 ) appears on the display. The first track of the selected CD begins playing. When the first CD finishes playing, the next and the third CDs are continuously played back. When the last CD has finished playing, the CD Player automatically stops.
CD1 = CD2 = CD3 = (stop) CD2 = CD3 = CD1 = (stop) t You can start to play the currently selected disc by simply pressing the CD 6 button. While playing the CD, the following will appear on the display.
During playback (using the 4 or button): Briefly press the 4 or button to select the track you want to play. By pressing the button, you can skip to the next track or skip back to the previous track. The selected track starts playing. Press the button once to skip to the beginning of the next track. (You can skip to the next CD (e.g. CD-1 = CD-2 = CD-3).) Press the 4 button to skip to the beginning of the current track. Press twice quickly to skip to the beginning of the previous track. (You cannot skip back to the previous CD.) In Stop mode (using the 4 or button): By briefly pressing the 4 or button, the CD Player operates in the same way as during playback, except the following points. The buttons are effective only for the currently selected CD. Using the numeric keys on the Remote Control: Using the numeric keys, you can directly select the track on the currently selected CD. The selected track starts playing. For example, press +10, then 5 to play back the track number 15. See Entering the Number with the Remote Control on page 8.

Search Play

Track number Elapsed CD is playing. playing time
When the Disc button (CD1-CD3) is pressed with the tray opened, the tray is closed and the selected CD automatically begins playing. To stop playing the CD, press the 7 button. The following information for the CD is displayed.
Holding down the following buttons, during playback, will fast forward/backwards the CD so you can quickly find a particular passage in the track you are listening to. 22 or button on the Unit 4 or button on the Remote Control
Total track number (After 5 seconds)

Total playing time

Track number

Playing time

To pause, press the CD 6 button. The playing time indication blinks on the display. To cancel pause, press the CD 6 button again. Play continues from the point where it was paused. To remove the CD, stop playing and press the CD Open/Close 0 button on the Unit.
Tips: Playing back the CD using the DISC SKIP button You can also play the CDs using the DISC SKIP button. During playback, each time you press the button, the next CD is automatically played back. If the next disc tray is empty, the disc tray is automatically skipped.
MX-K1R&MX-K3R(B).book Page 17 Friday, March 23, 2001 9:49 AM
Programming the Playing Order of the Tracks
You can program the playing order of the tracks on all the CDs. Note that you can only make a program when the CD Player is stopped. t You can program up to 32 tracks in any desired order including the same tracks.
Repeat steps 3 and 4 to program other tracks on the same CD or the other CD. To play the program, Press the CD ton.

6 but-

For details, see To Play the Program You Have Made mentioned below. To delete all the tracks in the program, while the CD Player is stopped, press the 7 button. To Modify the Program, while the CD Player is stopped, press the CANCEL button, the last track in the program is deleted. To add new tracks to the end of the program, repeat above steps 3 and 4.

To Make a Program

Load CDs In Stop mode, set the CD Player in Program Play mode.
On the Unit Press the PROGRAM button to light the PRGM indicator on the display. At the same time, PROGRAM appears on the display. On the Remote Control Press the PROGRAM/RANDOM button until PROGRAM appears on the display. The PRGM indicator also lights up on the display. Each time you press the button, the display changes as follows: PROGRAM = RANDOM = Blank display (Normal Play) = (back to the beginning) If a program is already made, the last step of the program will be displayed.
If you try to program a track number that does not exists on the CD, your entry will be ignored. If you try to program the 33rd track, FULL appears on the display.

To Play the Program You Have Made
Press the CD 6 button. The System plays the tracks in the order you have programmed them. To use Repeat Play for Program Play, press the REPEAT button to select ALL or 1 before starting playback. For details, see Repeating Tracks on page 18. t You can skip to a particular program track by pressing the 4 or button during Program Play. t To stop playing, press the 7 button once. If you press the 7 button, while the CD Player is stopped, the program is deleted.
Press one of the Disc button (CD1-CD3) to select the CD you want to program.
The display will change to the Program Entry display.
To Exit and Re-enter Program Play

Disc number Track number

Select the track you want to program.
Using the Unit While the display is blinking, press the 4 or button to select the track, then press the SET button within 5 seconds. The program order number will be assigned from P-1.
The program you have made is stored in memory. So, you can exit Program Play temporarily or re-enter Program Play unless you delete the program. To exit the program mode once, while the CD Player is stopped, press the PROGRAM button on the Unit or the PROGRAM/RANDOM button on the Remote Control to light off the PRGM indicator. By changing the source to the other (e.g. Tuner), the CD Player also exits Program Play mode. To re-enter Program Play mode, press the PROGRAM or PROGRAM/RANDOM button until the PRGM indicator lights up again.
Even when the power is turned off (standby or ECO mode), the programmed tracks are not deleted. So, you can re-enter Program Play mode.

Program order number

Using the Remote Control Press the numeric keys to directly enter the track number. Then, the program order number will be assigned from P-1. To delete the current program step, press the CANCEL button on the Unit.
MX-K1R&MX-K3R(B).book Page 18 Friday, March 23, 2001 9:49 AM

Random Play

The tracks of all the CDs will play in no special order when you use this mode. To use Repeat Play for Random Play, press the REPEAT button to select ALL or 1 before starting playback. For details, see Repeating Tracksmentioned below.

Tray Lock Function

In order to safely keep the CD in the CD Player, the tray can be electronically locked. When the electronic lock is on, the tray cannot be opened even if the CD Open/Close 0 button on the Unit is pressed.

In Stop mode, set the CD Player in Random Play mode.

Locking the Tray

On the Unit Press the RANDOM button to light the RANDOM indicator. At the same time, RANDOM appears on the display. On the Remote Control Press the PROGRAM/RANDOM button until the RANDOM appears on the display. The RANDOM indicator also lights up on the display. Each time you press the button, the display changes as follows: PROGRAM = RANDOM = Blank display (Normal Play) = (back to the beginning)
Turn on the System and enter CD mode. While pressing down the 7 button, press the CD Open/Close 0 button on the Unit.
LOCKED appears on the display.

Press the CD 6 button.

If you try to open the tray by pressing the 0 button, LOCKED appears on the display to let you know that the tray has been locked.
The tracks on all the CDs are played in random order. To stop playing, press the 7 button. To skip a track during playback, press the button to jump to the next track in the random sequence. To exit Random Play mode, while the CD Player is stopped, press the RANDOM button on the Unit or the PROGRAM/RANDOM button on the Remote Control again to light off the RANDOM indicator. Normal Play resumes.

Unlocking the Tray

Repeat above steps 1 and 2. UNLOCKED appears on the display.
Now, you can use the tray normally.

Repeating Tracks

You can repeat all tracks or individual track, as many times as you like. Press the REPEAT button. The Repeat indicator changes with each press of the button, as follows: ALL= 1CD = 1 = Blank display = (back to the beginning) REPEAT ALL: In Normal Play mode, repeats all the tracks on all the CDs. In Program Play mode, repeats all the tracks in the program. In Random Play mode, repeats all the tracks on all the CDs in random order. REPEAT 1CD: Repeats all tracks on one CD. (Selectable in Normal Play only) Repeats one track. REPEAT 1: To stop playing, press the 7 button. Changing the source to the other (e.g. Tuner) will also stop playing. To exit Repeat mode, press the REPEAT button until the Repeat indicator on the display goes out. t Repeat mode remains in effect during the following Play Mode changing: a. PROGRAM PLAY MODENORMAL PLAY MODE b. RANDOM PLAY MODE NORMAL PLAY MODE c. PROGRAM PLAY MODERANDOM PLAY MODE
English English English 18
MX-K1R&MX-K3R(B).book Page 19 Friday, March 23, 2001 9:49 AM
Using the Cassette Deck (Listening to a Tape)

TAPE 3

0 EJECT (Deck A)

TAPE 3 TAPE A/B

0 EJECT (Deck B) TAPE A/B

3: Tape indicator

Deck indicators * When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.
The Cassette Deck allows you to play, record, and dub audio tapes. t Listening to type I, II tape is suitable for this Cassette Deck. The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may occur and these tapes easily jam in the pinch-rollers and the capstans.
Close the cassette holder gently.
When both Deck A and Deck B contain a tape, the last deck to have a tape inserted is selected. The selected Deck is shown by the Deck indicator A or B. For example, when the Deck A is selected, the Deck indicator A lights up. To change the deck, press the TAPE A/B button. Each time you press the button, Deck A or Deck B is alternately selected.
By pressing the TAPE 3 button, the System will come on, and if a tape is in the deck, it will start to play. If no tape is loaded, NO TAPE appears on the display, the System will come on and wait for you to insert a tape, or select another function.

Press the TAPE 3 button.

The Tape indicator (3) blinks on the display and the tape is played back. The Cassette Deck automatically stops when one side of the tape has finished playing.

Playing a Tape

You can use either Deck A or Deck B at a time for playback.
Press the 0 EJECT part for the deck you want to use. When the cassette holder opens, put a cassette in, with the exposed part of the tape down, toward the base of the Unit.
The tape will travel from the left to right.
To stop playing, press the 7 button. To remove the tape, stop the tape, and press the 0 EJECT part to open the Cassette Holder.

To Fast-Wind A Tape

During playback or in Stop mode, press the (FF) button on the Unit to fast-wind the tape onto the right side of the cassette without playing. During playback or in Stop mode, press the 22 (REW) button on the Unit to fast-wind the tape onto the left side of the cassette without playing. During fast-winding the tape, the Tape indicator (3) goes out. The Cassette Deck automatically stops when one side of the tape has finished playing. t During fast-winding the tape, you can change the tape travelling direction by pressing the (FF) or 22 (REW) button.
Tape travelling direction
If the cassette holder does not open, turn the System off, then back on and press the 0 EJECT part again.

MX-K1R&MX-K3R(B).book Page 20 Friday, March 23, 2001 9:49 AM
Using the Cassette Deck (Recording)
PROGRAM REC START/STOP CD REC START DUBBING 0 EJECT (Deck A)
REC indicator 3: Tape indicator
Recording onto a cassette from any of the sound sources is simple. Just place a tape in Deck B, have the source ready, make one or two settings, and youre ready to record. For each source, the procedure is a little bit different so we explain each separately. But first, here are a few things to make your recordings better.
Things To Know Before You Start Recording
t It may be unlawful to record or play back copyrighted material without the consent of the copyright owner. t The recording level, which is the volume at which the new tape is being made, is automatically set correctly, so it is not affected by the VOLUME Control on the System. Also, it is not affected by adjusting the sound effects. Thus, during recording, you can adjust the sound you are actually listening to without affecting the recording level. t Two small tabs on the back of the cassette tape, one for side A and one for side B, can be removed to prevent accidental erasure or recording.
At the start and end of cassette tapes, there is leader tape which cannot be recorded onto. Thus, when recording CDs, radio broadcasts, etc., wind on the leader tape first to ensure getting the beginning of the recording.
If a recording you make has excessive noise or static, the Unit may have been too close to a TV which was on during the recording. Either turn off the TV or increase the distance between the TV and the Unit.

Adhesive tape

t To record on a cassette with the tabs removed, you must cover the holes with adhesive tape first. t Type I tape can be used for recording.
MX-K1R&MX-K3R(B).book Page 21 Friday, March 23, 2001 9:49 AM

Standard Recording

This is the basic method for recording any source. The System also has special ways for recording CD to tape, and tape to tape, which save you time and effort, as well as give you some special effects. However, when you need to add a selection to a tape you have made, or are combining selections from several sources on one tape, use the method described below; just substitute the source you want into this procedure, such as a tape in Deck A, a CD, or the Tuner. You can also record from an external equipment with this procedure.
Insert a blank or erasable tape into the Deck B and wind past the tape leader. Press the CD REC START button on the Unit.
CD REC appears on the display and the REC indicator lights up. Then, the System begins CD Synchro Recording and the tracks on the CD are recorded on the tape. When recording of the tracks of all CDs is finished, CD REC FINISHED scrolls on the display and the CD Player and Cassette Deck stop.

(When finished)

CD REC START
To Record Any Sound Source to Tape

At this time, DAILY indicator blinks and the Timer indicator ( ) lights up on the display. Each time you press the button, the display changes as follows: DAILY = ON TIME* = REC = ON TIME = Clock setting display = Canceled = (back to the beginning)
1. Press the or 4 button to set the hour you want the System to come on, then press the SET button. The minute digits of the ON time blink on the display.
* : This item should be selected for the Daily Timer setting.
After 2 seconds, the System enters ON-time setting mode. The current ON time appears on the display and the hour digits blink.
The System enter Music Source Selecting mode and TUNER FM appears on the display.
Setting the ON time (Example: 10:15).
1. Press the or 4 button to set the hour you want the System to come on, then press the SET button. The minute digits of the ON time blink on the display. Pressing the button moves the time forwards and pressing the 4 button moves it backwards. Holding down the button moves the time rapidly.
Press the or 4 button to select the music source you want to listen to, then press the SET button. Each time you press the or 4 button, the display changes as shown below: TUNER FM = TUNER AM = CD = TAPE = AUX = (back to the beginning) According to the music source you have selected, the next operation differs. TUNER FM: Tunes in to the specified preset FM station. TUNER AM: Tunes in to the specified preset AM station. CD : Plays the specified track on the specified CD. Plays a tape in the selected Deck (A or B). TAPE: Plays an external source. AUX:
Selecting the music source.
MX-K1R&MX-K3R(B).book Page 25 Friday, March 23, 2001 9:49 AM
Preparation for each music source: Perform the following operation according to the music source you have selected. Then, the System enters Volume Setting mode. When selecting TUNER FM or TUNER AM: Press the or 4 button to select the preset station number, then press the SET button. When selecting CD : 1. Press the or 4 button to select the disc number, then press the SET button. Each time you press the button the disc number changes as follows: CD = 1CD = 2CD = 3CD = (back to the beginning) 2. Press the or 4 button to select the track number, then press the SET button. For example: 2CD 12 (Disc number 2, Track number 12) When selecting TAPE: Be sure that the Deck indicator (A or B) is lit for the tape you want to play. When selecting AUX: Prepare the external equipment so that it will turn on at the ON time set by the System. To allow this, the equipment should have the timer function.

Capstan Pinch-roller

Do not use any solvent (for example, conventional record cleaner, spray thinner, benzine, etc.) to clean a CD.

General Notes

In general, you will have the best performance by keeping your CDs and the mechanism clean. Store CDs in their cases, and keep them in cabinets or on shelves. Keep the Systems Top Cover closed when not in use.

Moisture Condensation

Moisture may condense on the lens inside the System in the following cases: After turning on heating in the room. In a damp room. If the System is brought directly from a cold to a warm place. Should this occur, the System may malfunction. In this case, leave the System turned on for a few hours until the moisture evaporates, unplug the AC power cord, and then plug it in again.
If the heads become magnetized, the Unit will produce noise or lose high frequencies. To demagnetize the heads, turn off the Unit, and use a head demagnetizer (available at electronics and record shops).

English 28

MX-K1R&MX-K3R(B).book Page 29 Friday, March 23, 2001 9:49 AM

Troubleshooting

If you are having a problem with your System, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your dealer, for service. Symptom No sound is heard. Possible Cause Connections are incorrect, or loose. Headphones are connected. Poor radio reception The antenna is disconnected. The AM Loop Antenna is too close to the System. The FM Wire Antenna is not properly extended and positioned. The AC power cord is not plugged in. Tray is locked. The CD is dirty or scratched. The CD is upside down. During tape playing, the power cord was unplugged. Cassette record protect tabs are removed. The path between the Remote Control and the sensor on the Unit is blocked. The batteries have lost their charge. The built-in microprocessor has malfunctioned due to external electrical interference. Action Check all connections and make corrections. (See pages 4 to 6.) Disconnect the headphones. Reconnect the antenna securely. Change the position and direction of the AM Loop Antenna. Extend FM Wire Antenna to the best reception position. Plug the AC power cord. Unlock the tray. (See page 18.) Clean or replace the CD. (See page 28.) Put the CD in with the label side up. Plug in the power cord, and turn on the System. Cover holes on back edge of cassette with tape. Remove the obstruction. Replace the batteries. Unplug the System then plug it back in.
English English English English
The disc tray does not open. The CD skips. The CD does not play. The cassette holder cannot be opened. Unable to record. Unable to operate the Remote Control.

doc1

MX-J500/700[J].Safety/f 1 99.12.19, 1:49 PM
Instructions for safe use
(Statement in accordance with the UL standards)
1) Read Instructions Read carefully this instructions for your safe use before this appliance is installed, wire-connected, and operated. Retain Instructions For your future reference, retain this instruction. Follow Instructions Follow and obey all warnings, cautions and instructions marked on this appliance and this instruction. Water and Moisture Do not expose this appliance to rain, water and moisture, or operate it near water for example near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool, and the like. Ventilation and Heat This appliance should be situated so that its location does not interfere with its proper ventilation. For example, this appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. This appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. Power sources This appliance should be connected to a power supply only of the type as marked on this appliance. Polarization The precautions that should be taken so that the polarization means of this appliance is not defeated. Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. Cleaning The appliance should be cleaned only as recommended by the manufacturer. 11) Outdoor Antenna Grounding If this appliance is provided with means to connect the outdoor antenna and outside antenna is connected to this appliance, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/ NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antennadischarge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Example of antenna grounding is illustrated in here.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE

Playing Back Tapes... 16

Playing Back a Tape.. 16 Locating the Beginning of a Song Music Scan. 16

Recording... 17

Recording a Tape on Deck B. Dubbing Tapes... CD Direct Recording.. Auto Edit Recording.. Using Daily Timer.. Using Recording Timer.. Using Sleep Timer.. Timer Priority... 22 22

Using the Timers.. 20

Maintenance.. 23 Troubleshooting... 23 Specifications... 24
EN01-12.MX-J500/700[J]/f 2 99.12.19, 1:51 PM
Location of the Buttons and Controls
Become familiar with the buttons and controls on your unit.

Front Panel

Powered Rolling Panel o
Press PANEL OPEN/ CLOSE to open the panel. To close the panel, press the button again.

j k l / z x c v b

d f g h

MX-J700

MX-J500

e r t y

EN01-12.MX-J500/700[J]/f 3 99.12.19, 1:51 PM

Continued

Display Window
See pages in the parentheses for details.
Disc trays POWER button and STANDBY lamp (9) Display window For MX-J700: SUBWOOFER VOLUME control (10) For MX-J500: ACTIVE BASS EX. (extension) LEVEL control (10) Remote sensor TAPE button and lamp (9, 16) Pressing this button also turns on the unit. AUX button and lamp (9) Pressing this button also turns on the unit. Deck A cassette holder (16) 0 EJECT button for deck A (16) Disc number buttons (CD1, CD2, and CD3) (13) Pressing one of these buttons also turns on the unit. 0 (CD tray open/close) buttons (13) Pressing one of these buttons also turns on the unit. VOLUME control (10) CD 8 (play/pause) button and lamp (9, 13) Pressing this button also turns on the unit. PANEL OPEN/CLOSE button (9) Pressing this button also turns on the unit. PHONES jack (10) FM/AM button and lamp (9, 12) Pressing this button also turns on the unit. Deck B cassette holder (16, 17) EJECT 0 button for deck B (16, 17)
d f g h j k l / z x c v b

9 p q w e r t y u i

CD REC START button (18, 19) TAPE A/B button (16) CLOCK/TIMER button (9, 20 22) SET button (9, 12, 20 22) 7 (stop) button (13 19) TUNING / + buttons (12) 1 / (fast left/fast right) buttons (11, 14, 16) SEA CONTROL button (11) PROGRAM/RANDOM button (14, 15, 18) EDIT button (19) REPEAT button (15) DISPLAY button (9) SOUND MODE button (10) CANCEL button (9, 15, 20) DEMO button (8)

When using the remote control, press ACTIVE BASS EX. + to increase the bass sound level or press ACTIVE BASS EX. to decrease it. To cancel the Active Bass Extension, turn the control counterclockwise until BASS OFF appears.
Selecting the Sound Modes
To turn down the volume level temporarily
Press FADE MUTING on the remote control. The volume level gradually decreases to MIN. To restore the sound, press the button again. You can select one of the 6 preset sound modes (3 surround modes and 3 SEA Sound Effect Amplifier modes). This function only affects the playback sound, but does not affect your recording. To select the sound modes, press SOUND MODE until the sound mode you want appears on the display. The SOUND MODE indicator also lights up on the display.
Reinforcing the Bass Sound
This function only affects the playback sound, but does not affect your recording. For MX-J700 The SUBWOOFER VOLUME control provided for this unit can enhance the subwoofer sound if subwoofers are connected to the rear of this unit (see page 7). Turn the SUBWOOFER VOLUME control clockwise to increase the subwoofer sound or counterclockwise to decrease it. The subwoofer level can be adjusted in 6 steps (WOOFER 1 WOOFER 5, and MAX).
Each time you press the button, the sound modes change as follows:

D.CLUB

(Dance CLUB)

STADIUM

ROCK POP CLASSIC

(Canceled)

MANUAL 3

MANUAL 2

MANUAL 1
SUBWOOFER indicator always lights up when the unit is on.
EN01-12.MX-J500/700[J]/f 10 99.12.20, 4:56 PM
Surround modes *: D.CLUB: Increases resonance and bass. HALL: Adds depth and brilliance to the sound. STADIUM: Adds clarity and spreads the sound, like in an outdoor stadium. SEA (Sound Effect Amplifier) modes: ROCK: Boosts low and high frequency. Good for acoustic music. POP: Good for vocal music. CLASSIC: Good for classical music. Manual modes: MANUAL 1/2/3: Your individual mode stored in memory. See Creating Your Own Sound Mode Manual Mode. OFF: Cancels the sound mode.
2 Adjust the SEA pattern.
1) Press 4 or to select the frequency range to adjust (LOW, MID, HIGH). 2) Press 1 or to adjust the level (3 to +3) of the selected frequency range. 3) Repeat steps 1) and 2) to adjust the level of the other frequency ranges.
3 Press SEA CONTROL again.
* Surround elements are added to the SEA elements to create a being-there feeling in your room. When one of these modes is selected, the SOUND MODE indicator lights up as

Repeating Tracks or CDs Repeat Play
You can have all the CDs, the program or the individual track currently playing repeat as many times as you like. To repeat play, press REPEAT during or before playing. To use Repeat play for Program play and Random play, press the button after starting playback. Each time you press the button, Repeat play mode changes as follows, and the following indicator lights up on the display:

REPEAT ALL Canceled

(Continuous play)
If you try to program a 33rd track FULL will appear on the display. If your entry is ignored You have tried to program a track from an empty tray, or a track number that does not exist on the CD (for example, selecting track 14 on a CD that only has 12 tracks). Such entries are ignored.

REPEAT 1CD REPEAT 1

Playing at Random Random Play
The tracks of all loaded CDs will play at random. To use Repeat play for Random play, press REPEAT after starting Random play.
REPEAT ALL: Repeats all the tracks on all the CDs (continuously or at random), or all the tracks in the program. REPEAT 1CD*: Repeats all the tracks on one CD. REPEAT 1: Repeats one track on one CD. * REPEAT 1CD is not used for Program play and Random play. To cancel Repeat play, press REPEAT repeatedly until the REPEAT indicator (REPEAT ALL, REPEAT 1CD, or REPEAT 1) goes off from the display. Repeat play is also canceled when you select Program play or Random play.
repeatedly until RANDOM appears on the display.
Prohibiting Disc Ejection Tray Lock
You can prohibit CD ejection from the unit and can lock CDs. This operation is possible only using the buttons on the unit. To prohibit disc ejection, press 0 for any disc tray while holding 7. (If there is any disc tray opened, close it first.) LOCKED appears for a while, and the loaded CDs are locked. To cancel the prohibition and unlock the CDs, press 0 for any disc tray while holding 7. UNLOCKED appears for a while, and the loaded CDs are unlocked.
If you try to eject CDs LOCKED appears to inform you that the Tray Lock is in use.

Program Play Random Play

3 Press CD 8.

Continuous Play

The tracks are played at random. Random play ends when all the tracks are played once. To skip the currently playing track, press (or / on the remote control).
EN13-16.MX-J500/700[J]/f 15 99.12.19, 1:53 PM

Playing Back Tapes

You can play back type I, type II, and type IV tapes without changing any settings.
To play both sides repeatedly Reverse Mode
Reverse Mode works for both decks at the same time. When it is in use, the tape automatically reverses at the end of a side and the unit starts playing the other side of the tape, and repeats the same process. To use Reverse Mode, press REVERSE MODE so that the Reverse Mode indicator on the display lights up like To cancel Reverse Mode, press the button again so that the Reverse Mode indicator on the display lights up like

Playing Back a Tape

1 Press EJECT (0) for the deck you want to
For Deck B For Deck A When Reverse Mode is on with cassettes in both decks A and B After the reverse (2) side of the tape finishes playing, the tape in the other deck starts playing.
2 Put a cassette in, with the exposed part of the

tape down.

Locating the Beginning of a Song Music Scan
You can use Music Scan to locate the beginning of a song. Music Scan searches for blank portions that usually separate recorded songs, then plays the next song.
3 Close the cassette holder gently.
If you put cassettes in both decks A and B, the last deck you have put a cassette into is selected. To operate the other deck, press TAPE A/B.
To find the beginning of the current song
During play, press 1 / (1 / 4 or / on the remote control) in the opposite direction to the tape play. The tape direction indicator of the opposite direction to the tape play starts flashing slowly. Searching stops automatically at the beginning of the current song, and the current song starts automatically.

4 Press TAPE 2 3.

The tape play starts and the tape direction indicator (2 3) starts flashing slowly to indicate the tape running direction. Each time you press the button, the tape direction changes. 3 : plays the front side. 2 : plays the reverse side. When the tape plays to the end, the deck automatically stops if the Reverse Mode is not on. (See To play both sides repeatedly Reverse Mode.) To stop during play, press 7. To operate the other deck, press TAPE A/B, then TAPE 2 3. To fast wind to the left or to the right, press 1 / (1 / 4 or / on the remote control) while the tape is not running. The tape direction indicator (2 3) starts flashing quickly on the display. To remove the cassette, press 0 EJECT for deck A or EJECT 0 for deck B.
To find the beginning of the next song
During play, press 1 / (1 / 4 or / on the remote control) in the same direction as the tape play. The tape direction indicator of the same direction as the tape play starts flashing slowly and quickly alternately. Searching stops automatically at the beginning of the next song, and the next song starts automatically.
Music Scan works by detecting a 4-second long blank between each song, so it will not work well in the following cases No blank at the beginning of a song. Noise (often caused by much use or poor quality dubbing) which fills the blank. Long, very soft passages or pauses in a song.

Pinch rollers Capstans

6 Start recording.
On the unit: Press REC START/STOP. On the remote control: Press and hold REC START/STOP for more than 1 second.
The REC (recording) indicator lights up on the display and recording starts. To stop during recording, press REC START/STOP again or 7. To remove the cassette, press EJECT 0 for deck B.
To record on both sides Reverse Mode
Press REVERSE MODE so that the Reverse Mode indicator lights up as When using the Reverse Mode for recording, start recording in the forward (3) direction first. Otherwise, recording will stop when recording is done only on one side (reverse) of the tape. To cancel Reverse Mode, press the button again so that the Reverse Mode indicator lights up as
To demagnetize the heads Turn off the unit, and use a head demagnetizer (available at electronics and record shops).
EN17-24.MX-J500/700[J]/f 17 99.12.19, 1:54 PM
To record an AM station Beat Cut
While recording an AM broadcast, beats may be heard (which are never heard when listening to the broadcast without recording it). If this occurs, press PROGRAM/RANDOM repeatedly, while recording, until the beats are reduced. Each time you press the button, the display changes to show the following:

CUT1 CUT2 CUT3

CD Direct Recording
Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have made for Program play.
1 Put a recordable cassette into deck B. 2 Place a disc correctly on the circle of the disc

Dubbing Tapes

It is preferable that the tape type (type I or II) you record from be the same as the tape type you record onto when dubbing tapes.
buttons (CD1 to CD3) to select the disc, then 7.

4 Press CD REC START.

CD REC appears, and the REC (recording) indicator lights up on the display. Deck B starts recording and the CD player starts playing. When the recording is done, CD REC FINISHED appears on the display, and the CD player and deck B stop. To stop during CD Direct Recording, press 7 or REC START/STOP.
1 Press TAPE 2 3, then 7.
2 Put the source cassette in deck A, and a
recordable cassette into deck B.
Put the cassettes in both decks so that the tapes will run in the forward (3) direction.
Press REVERSE MODE so that the Reverse Mode indicator lights up as When using the Reverse Mode for CD Direct Recording, start recording in the forward (3) direction first. When the tape reaches its end while recording a song in the forward direction (3), the last song will be recorded at the beginning of the reverse side (2). If you start recording on the reverse side (2), recording will stop when recording is done only on one side (reverse) of the tape. To cancel Reverse Mode, press the button again so that the Reverse Mode indicator lights up as

Using Daily Timer

With Daily Timer, you can wake to your favorite music or radio program.
3 Set the on-time you want the

unit to turn on.

1) Press 4 or to set the hour, then press SET. 2) Press 4 or to set the minute, then press SET. OFF TIME appears for 2 seconds, then the unit enters off-time setting mode.
How Daily Timer actually works
The unit automatically turns on, set the volume level to the preset level, and starts playing the specified source when the on-time comes (the indicator flashes just before the ontime, and continues flashing while the timer is operating). Then, when the off-time comes (OFF flashes just before the off-time), the unit automatically turns off (stands by). The timer setting remains in memory until you change it. There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again. If you have made a mistake while setting timer, press CANCEL. (However, this does not always work. If CANCEL does not work, press CLOCK/TIMER repeatedly and start from step 1 again.) Before you start. When using a CD as the source to play, make sure there is a CD on the selected disc number tray. When using a tape as the source to play Make sure that a tape is in the deck whose deck indicator (A or B) is lit on the display. Make sure that the tape direction is correct. When using the external component as the source to play, set the timer equipped with the external component at the same time.
4 Set the off-time you want the
unit to turn off (on standby).
1) Press 4 or to set the hour, then press SET. 2) Press 4 or to set the minute, then press SET. The unit enters source selecting mode.
5 Press 4 or to select the
source to play, then press SET.
Each time you press 4 or , the source changes as follows:
TUNER FM TUNER AM CD AUX TAPE
1 Press CLOCK/TIMER until
DAILY appears on the display.
The DAILY (Daily Timer) indicator also starts flashing on the display.
TUNER FM: tunes into a specified preset FM station. = go to step 6. TUNER AM: tunes into a specified preset AM station. = go to step 6. CD : plays a disc from a specified track of a specified disc. = go to step 6. TAPE: plays a tape in deck A or B. = go to step 7. AUX: plays an external source. = go to step 7.

Each time you press the button, the timer setting modes change as follows:
DAILY Canceled ON TIME Clock setting

(See page 9.)

REC ON TIME
EN17-24.MX-J500/700[J]/f 20 99.12.19, 1:54 PM

6 When selecting CD

Using Recording Timer
With Recording Timer, you can make a tape of a radio broadcast automatically.
1) Press 4 or to select the disc number, then press SET. 2) Press 4 or to set the track number, then press SET. The unit enters volume setting mode.
How Recording Timer actually works
The unit automatically turns on, tunes into the specified station, sets the volume level to MIN, and starts recording when the on-time comes (the indicator flashes just before the on-time, and continues flashing while the timer is operating). Then, when the off-time comes (OFF appears just before the off-time), the unit automatically turns off (stands by). The timer setting remains in memory until you change it. There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again. If you have made a mistake while setting the timer, press CANCEL. (However, this does not always work. If CANCEL does not work, press CLOCK/TIMER repeatedly and start from step 1 again.)
When selecting TUNER FM or TUNER AM
Press 4 or to select the preset station number, then press SET. The unit enters volume setting mode.

7 Press 4 or to set the

volume level.
You can select the volume level from among the following VOL , VOL 5, VOL 10, and VOL 15. If you select VOL , the volume is set to the last level when the unit has been turned off.
8 Press SET to complete the Daily

Timer setting.

The DAILY (Daily Timer) indicator stops flashing and remains lit. The settings you have done are shown on the display in sequence.
1 Put a recordable cassette into deck B. 2 Press CLOCK/TIMER until REC

appears on the display.

The REC (Recording Timer) indicator also starts flashing on the display.
9 Press POWER to turn off the unit
(on standby) if you have set the Daily Timer with the unit turned on.

AM 6:00 6:30 7:00 7:30

To turn on or off Recording Timer after its setting is done
1 Press CLOCK/TIMER repeatedly until REC appears on the display. 2 To turn off the Recording Timer, press CANCEL. The REC (Recording Timer) indicator goes off from the display. The Recording Timer is canceled, but the setting for the Recording Timer remains in memory. To turn on the Recording Timer, press SET. The REC (Recording Timer) indicator lights up on the display. The settings you have done are shown on the display in sequence for your confirmation.
Recording Timer Daily Timer does not work.
If Recording Timer is set to come on while Sleep Timer is operating, Sleep Timer will not work (the SLEEP indicator does not go off). 7:30 6:30 7:00 AM 6:00
Recording Timer Sleep Timer does not work.
EN17-24.MX-J500/700[J]/f 22 99.12.19, 1:55 PM

Maintenance

To get the best performance of the unit, keep your discs, tapes, and mechanism clean.

Handling discs

Remove the disc from its case by holding it at the edge while pressing the center hole lightly. Do not touch the shiny surface of the disc, or bend the disc. Put the disc back in its case after use to prevent warping. Be careful not to scratch the surface of the disc when placing it back in its case. Avoid exposure to direct sunlight, temperature extremes, and moisture.

Handling cassette tapes

If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. If the tape is loose, it may get stretched, cut, or caught in the cassette. Be careful not to touch the tape surface.
To clean the disc Wipe the disc with a soft cloth in a straight line from center to edge.
Avoid the following places to store the tape: In dusty places In direct sunlight or heat In moist areas Near a magnet
DO NOT use any solvent such as conventional record cleaner, spray, thinner, or benzine to clean the disc.

Troubleshooting

If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service.
Symptom No sound is heard. Hard to listen to broadcasts because of noise. Cause Connections are incorrect or loose. Antennas are disconnected. The AM loop antenna is too close to the unit. The FM antenna is not properly extended and positioned. The disc sound is discontinuous. The disc tray does not open or close. The disc does not play. The cassette holders cannot be opened. Impossible to record. Operations are disabled. The disc is scratched or dirty. The AC power cord is not plugged in. Trays are locked. The disc is placed upside down. Power supply from the AC power cord has been cut off while the tape was running. Small tabs on the back of the cassette are removed. The built-in microprocessor may malfunction due to external electrical interference. The path between the remote control and the remote sensor on the unit is blocked. The batteries are exhausted. Action Check all connections and make corrections. (See pages 6 to 8.) Reconnect the antennas correctly and securely. Change the position and direction of the AM loop antenna. Extend the FM antenna at the best position. Clean or replace the disc. (See above.) Plug the AC power cord. Unlock the trays. (See page 15.) Place the disc with the label side up. Turn on the unit. Cover the holes with adhesive tape. Unplug the AC power cord and then plug it back in. Remove the obstruction. Replace the batteries.

Unable to operate the unit from the remote control.
EN17-24.MX-J500/700[J]/f 23 99.12.19, 1:55 PM

Specifications

MX-J700 Amplifier section CA-MXJ700
Output Power SUBWOOFERS: 100 W per channel, min. RMS, driven into 6 at 63 Hz with no more than 10% total harmonic distortion. MAIN SPEAKERS:50 W per channel, min. RMS, driven into 6 at 1 kHz with no more than 10% total harmonic distortion. Audio input sensitivity/Impedance (at 1 kHz, measured at MAIN SPEAKERS) AUX: 590 mV/50 k Digital output: CD OPTICAL DIGITAL OUTPUT Signal wave length: 660 nm Output level: 15 dBm to 12 dBm Speakers/Impedance: 6 16
Design and specifications are subject to change without notice.
MX-J500 Amplifier section CA-MXJ500
Output Power 120 W per channel, min. RMS, driven into 6 at 1 kHz with no more than 10% total harmonic distortion. Audio input sensitivity/Impedance (at 1 kHz) AUX: 580 mV/50 k Digital output: CD OPTICAL DIGITAL OUTPUT Signal wave length: 660 nm Output level: 15 dBm to 12 dBm Speakers/Impedance: 6 16
FM tuning range: 87.5 MHz 108.0 MHz AM tuning range: 530 kHz 1,710 kHz

CD player

CD Capacity: Dynamic range: Signal-to-noise ratio: Wow and flutter: 3 CDs 85 dB 90 dB Immeasurable

Cassette deck

Frequency response Normal (type I): 50 Hz 14,000 Hz CrO2 (type II): 50 Hz 14,000 Hz Metal (type IV): 50 Hz 14,000 Hz (only for playback) Wow and flutter 0.15% (WRMS)

General

AC 120 V , 60 Hz 95 W / 125 VA (at operation) 14 W (on standby) Dimensions (approx.): 265 mm x 335 mm x 368 mm (W/H/D) (10 7/16 in. x 13 1/4 in. x 14 1/2 in.) Mass (approx.): 9.7 kg (21.4 lbs) Power requirement: Power consumption:
AC 120 V , 60 Hz 155 W / 200 VA (at operation) 17 W (on standby) Dimensions (approx.): 265 mm x 335 mm x 368 mm (W/H/D) (10 7/16 in. x 13 1/4 in. x 14 1/2 in.) Mass (approx.): 9.9 kg (21.8 lbs) Power requirement: Power consumption:

Supplied accessories

See page 6.
Speaker section SP-MXJ550
3-way bass-reflex type Woofer: 16 cm (6 5/16 in.) cone x1 Midrange: 5 cm (2 in.) cone x1 Tweeter: 2 cm (13/16 in.) dome x1 Power handling capacity: 120 W Impedance: 6 Frequency range: 45 Hz 25,000 Hz Sound pressure level: 86 dB/Wm Dimensions (approx.): 235 mm x 335 mm x 270 mm (W/H/D) (9 5/16 in. x 13 1/4 in. x 10 11/16 in.) Mass (approx.): 3.7 kg (8.2 lbs) each Speaker units:
Speaker section SP-MXJ700
4-way bass-reflex type Twin Hyper Power-Drive Subwoofer Speaker units: Subwoofer: 16 cm (6 5/16 in.) cone x1 Main Woofer: 16 cm (6 5/16 in.) cone x1 Midrange: 5 cm (2 in.) cone x1 Tweeter: 2 cm (13/16 in.) dome x1 Power handling capacity: Subwoofer: 100 W Main speaker: 50 W Impedance: Subwoofer: 6 Main speaker: 6 Frequency range: Subwoofer: 26 Hz 3,500 Hz Main speaker: 70 Hz 29,000 Hz Sound pressure level: Subwoofer: 75 dB/Wm Main speaker: 88 dB/Wm Dimensions (approx.): 286 mm x 335 mm x 365 mm (W/H/D) (11 5/16 in. x 13 1/4 in. x 14 3/8 in.) Mass (approx.): 6.3 kg (13.9 lbs) each

99.12.20, 8:44 PM

EN17-24.MX-J500/700[J]/f

QUALITY

SERVICE
HOW TO LOCATE YOUR JVC SERVICE CENTER
TOLL FREE : 1-800-537-5722 http://www.jvcservice.com Dear customer: In order to receive the most satisfaction from your purchase, read the instruction booklet before operating the unit. In the event that repair is necessary, or for the address nearest your location, please refer to the factory service center list below or within the Continental United States, Call 1-800-537-5722 for your authorized servicer. Remember to retain your Bill of Sale for Warranty Service.
JVC SERVICE & ENGINEERING COMPANY OF AMERICA DIVISION OF JVC AMERICAS CORP.
FACTORY SERVICE CENTER LOCATIONS
10 New Maple Avenue Pine Brook, NJ 07058-9641 (973) 396-Corporate Avenue Cypress, CA 90630-0024 (714) 229-Cummings Park Woburn, MA 01801 (781) 376-Lakes Parkway Lawrenceville, GA 30243-5857 (770) 339-Mapunapuna Place Honolulu, HI 96819-2040 (808) 833-State Road 84 Davie, FL 33324 (954) 472-Enterprise Street Aurora, IL 60504-8149 (630) 851-Hammerly, Suite 110 Houston, TX 77043 (713) 935-Dubuque Avenue South San Francisco, CA 94080-1804 (650) 871-2666
Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level of performance for which JVC is world famous. The JVC service and engineering organization stands behind our products.
NATIONAL HEADQUARTERS JVC SERVICE & ENGINEERING COMPANY OF AMERICA DIVISION OF JVC AMERICAS CORP. 1700 Valley Road Wayne, NJ 07470

If you ship the product

Pack your JVC unit in the original carton or one of equivalent size and strength. Enclose, with the unit, a letter stating the problem or symptom that exists and also a copy of the receipt or bill of sale you received when you purchased your JVC unit. Print your home return address on the outside and the inside of the carton. Send to the appropriate JVC Factory Service Center as listed above.
Dont service it yourself. CAUTION
To prevent electrical shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified service personnel.

ACCESSORIES

To purchase accessories for your JVC product, you may contact your local JVC Dealer. Or from the 48 Continental United States call toll free : 800-882-2345

(1099)

MX-J500/700[J].Warranty/f

99.12.19, 1:50 PM

LIMITED WARRANTY

AUDIO-1

JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP from the date of original retail purchase for the period as shown below. (The Warranty Period.) PARTS 1YR LABOR 1YR

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY(50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN COMMONWEALTH OF PUERTO RICO. WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and above which are covered on an in-home basis. WHAT YOU MUST DO FOR WARRANTY SERVICE: Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized service center, please call toll free: (800)537-5722. If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of your bill of sale plus and letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location of which will be given to you by the toll-free number. If you have any questions concerning your JVC Product, please contact our Customer Relations Department. WHAT IS NOT COVERED: This limited warranty provided by JVC does not cover: 1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by JVC to render such service, or if affixed to any attachment not provided with the products, or if the model number or serial number has been altered, tampered with, defaced or removed; 2. Initial installation and installation and removal for repair; 3. Operational adjustments covered in the Owners Manual, normal maintenance, video and audio head cleaning; 4. Damage that occurs in shipment, due to act of God, and cosmetic damage; 5. Signal reception problems and failures due to line power surge; 6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus(Needle) are covered for 90 days from the date of purchase; 7. Accessories; 8. Batteries (except the Rechargeable Batteries are covered for 90 days from the date of purchase); There are no express warranties except as listed above. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied warranty last, so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. JVC COMPANY OF AMERICA DIVISION OF JVC AMERICAS CORP. 1700 Valley Road Wayne, NJ 07470

 

Tags

RDR-GX220 DAV-DZ820KW GS93W65CEF Dynax 3L SMP-N100 Charger EWH-80SL VGP-PRZ1 U22 D Thinkpad 600E RF26vabbp XAA VR550 F40 FD Leica R4 SCC-C6435P Novak GTB Q1027 MF5750 Edirol R1 PS50C430a1 SL-QD33 XC700 WM2032HS SV0802E S4R-2004 ATA-171P ICD-P630F MYC4-2 MRV-F505 FM30AH Kodak C182 EB-G5350NL S5230C GR-L197NIS 14PT1332 WV-CU550C PV-L600D Kardon 330A R530-JA07 PCG-505E CQ-C1301U 32PFL3512D Chair RX-6012R TS250GSJ25m-R Documate 250 KDL-V40xbr1 520 Plus 100 KC2 L62640 910 510 RC-EZ35sc-rc-ez35 Easyshare C143 TDS370T SR224G WH-700 AUF23391W Dwl-G510 ML-2550 5 BS UX-F250CW CMT-A70 Diagram MRD-M500 BV2250 Aspire 2930 Optimus V-KC902HTM GTX285-htdi-1GD3 TX-SV444 Motif6-motif7-motif8 KDL-22PX300 Removal Tool Spec-2 Digital 500 LT17M24CU KX-B630 MX-50X3 DJ-196 DTH 8540 STR-GX700ES BH-109 CDP-CX200 Powershot TX1 PT-110 Revenge Electric A735 CDP-311 Motorola V3C Review DVD580M-171 ZWT3105 Server 2 6 TH-65PF9EK KCA-620M PMP300 Server Motolivn D802 RA-04 CS-E18gfew

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101