y u i o ; a s d

FM MODE button (23) MEMORY button (22, 23) SETTING button (15) SET button (15, 19) MULTI JOG dial (15, 19) EXIT button (15, 19) ADJUST button (19) For RX-6030VBK and RX-6032VSL Source selection buttons (11) DVD MULTI, DVD, VCR, TV SOUND, CD, TAPE/CDR, FM, AM SOURCE NAME button (12) f For RX-5030VBK and RX-5032VSL Source selection buttons (11) DVD, VCR, TV SOUND, CD, TAPE/CDR, FM/AM SOURCE NAME button (12)
01-10_RX-60_5030[J]f 2 02.11.28, 13:46

Display

= ~ ! @ # $
TUNED indicator (22) INPUT ATT indicator (18) STEREO indicator (22) AUTO MUTING indicator (23) SLEEP indicator (14) VOLUME indicator (13) Digital signal format indicators (17) CH indicator (22) Main display
See pages in parentheses for details. ANALOG indicator (17) DIGITAL AUTO indicator (17) SPK indicator (13) Speaker indicators and signal indicators (27) PRO LOGIC II indicator (24, 26) DSP indicator (25, 27) H.PHONE indicator (13) RX-6030VBK and RX-6032VSL only: BASS BOOST indicator (18)

Remote Control

See pages in parentheses for details. 1 TV/CATV selector (35) keys for selecting preset channels (23) 10 keys for sound adjustment (20, 21) 10 keys for operating audio/video components (32 36) 3 SOUND button (20, 21) 4 REC PAUSE button (33, 34) 5 Source selection buttons (11) TAPE/CDR, CD, DVD, DVD MULTI*, FM/AM, TV SOUND, VCR 6 FM MODE button (23) 7 SURROUND button (26) 8 DIMMER button (13) 9 TV/VIDEO button (34, 35) 0 VCR CH +/ buttons (34, 36) - TV/CATV CH +/ buttons (34, 35) buttons (11, 34 36) = STANDBY/ON AUDIO, TV/CATV, VCR, DVD ~ SLEEP button (14) ! Operating buttons for audio/video components 3, 8, 7, /4, FF/REW (33, 34, 36) @ CD-DISC button (33) # ANALOG/DIGITAL button (17) $ SURROUND/DSP OFF button (26, 27) % DSP button (27) ^ MUTING button (13) & BASSBOOST* button (18) * VOLUME +/ button (13) ( TV VOLUME +/ buttons (34, 35)
A/V CONTROL RECEIVER FRONT L FRONT R

CENTER

SUBWFR

TV/CATV

SURR L

SURR R VCR

RETURN

TA/NEWS/INFO 100

REW FF REC PAUSE CD-DISC
TAPE/CDR CD DVD DVD MULTI ANALOG /DIGITAL FM/AM TV SOUND VCR

0 FM MODE SURROUND DSP

SURROUND /DSP
OFF DIMMER TV/VIDEO BASSBOOST MUTING

* # $ % ^ &* *

Getting Started/Basic Operations

Front panel

STANDBY/ON and STANDBY lamp
RX6030V AUDIO/VIDEO CONTROL RECEIVER

Remote control

A/V CONTROL RECEIVER

STANDBY/ON AUDIO

Source selection buttons

Turning On the Power

Press STANDBY/ON (or STANDBY/ON AUDIO on the remote control). The STANDBY lamp goes off. The name of the current source (or station frequency) appears on the display. To turn off the power (into standby mode) (or STANDBY/ON Press STANDBY/ON remote control) again. The STANDBY lamp lights up.
Note: A small amount of power is consumed in standby mode. To turn the power off completely, unplug the AC power cord.

TAPE/CDR*:

Select the cassette deck (or the CD recorder). FM (front panel): Select an FM broadcast. AM (front panel): Select an AM broadcast. FM/AM* (remote control): Select an FM or AM broadcast. Each time you press the button, the band alternates between FM and AM.

AUDIO on the

On the front panel
DVD VCR TV SOUND CD TAPE/CDR FM/AM

From the remote control

TAPE/CDR CD DVD ANALOG /DIGITAL
Selecting the Source to Play
Press one of the source selection buttons. The selected source name appears on the display. DVD: VCR: TV SOUND: CD*: TAPE/CDR*: FM/AM*:
DVD MULTI DVD VCR TV SOUND CD TAPE/CDR
TAPE/CDR CD DVD DVD MULTI ANALOG /DIGITAL
Select the DVD player. Select the VCR. Select the TV sound (or the CATV converter). Select the CD player. Select the cassette deck (or the CD recorder). Select an FM or AM broadcast. Each time you press the button, the band alternates between FM and AM.
Notes: When connecting a CD recorder to the TAPE/CDR jacks, change the source name to CDR so that CDR appears on the display when selected as the source. See Changing the Source Name on page 12. When you have connected some digital source components using the digital terminals (see page 10), you need to select the digital input terminals (see page 16). When you press one of the source selection buttons on the remote control marked with an asterisk (*), the receiver automatically turns on.

DVD MULTI:

DVD: VCR: TV SOUND: CD*:
Select the DVD player for viewing a digital video disc using the analog discrete output mode (5.1 channel reproduction). To use the DVD MULTI playback, see page 28. Select the DVD player. Select the VCR. Select the TV sound (or the CATV converter). Select the CD player.
11-17_RX-60_5030[J]f 11 02.11.28, 13:47
DIMMER MASTER VOLUME control

Audio source selection buttons DIMMER MUTING VOLUME +/

PHONES jack

SPEAKERS ON/OFF

SOURCE NAME (TAPE/CDR)

Audio source selection buttons

Changing the Source Name

Selecting Different Sources for Picture and Sound
You can watch the picture from a video component while listening to sound from another component. Press one of the audio source selection buttons while watching the picture from a video component such as the VCR or DVD player. Once you have selected a video source, pictures of the selected source are sent to the TV until you select another video source.
When you have connected a CD recorder to the TAPE/CDR jacks on the rear panel, change the source name to CDR so that CDR appears on the display when selected as the source.

CD TAPE/CDR

Press TAPE/CDR (SOURCE NAME) on the front panel to select TAPE as the source. Press again and hold SOURCE NAME (TAPE/CDR) on the front panel until ASSIGN CDR appears on the display.
DVD MULTI ANALOG /DIGITAL

CD TAPE/CDR FM/AM

To change the source name from CDR to TAPE, repeat the same procedure above.
Note: Without changing the source name, you can still use the connected components; however, you may experience one of the following inconveniences: A different source name will appear on the display when you select the target component. You cannot use the digital input (see page 16) for the CD recorder. You cannot use the COMPU LINK remote control system (see page 29) to operate the target component.

DVD ANALOG /DIGITAL

11-17_RX-60_5030[J]f 12 02.11.28, 13:47

Adjusting the Volume

To increase the volume, turn MASTER VOLUME control clockwise. To decrease the volume, turn MASTER VOLUME control counterclockwise.
After using the headphones
1 Press SPEAKERS ON/OFF on the front panel to activate the speakers.
The H.PHONE indicator goes off and the SPK indicator lights up.
2 Disconnect the headphones.
To increase the volume, press VOLUME +. To decrease the volume, press VOLUME. The volume level can be adjusted within a range of 0 (minimum) to 50 (maximum). CAUTION:
Always set the volume to the minimum before starting any source. If the volume is set at a high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.

Notes: You cannot assign and store different settings for digital input mode and analog input mode. If the source is FM or AM, you can assign a different setting for each band.

7/P 10

Press SLEEP on the remote control repeatedly. The SLEEP indicator lights up on the display. Each time you press the button, the shut-off time changes in 10 minute intervals as follows:

For recording

You can record any sources playing through the receiver to a cassette deck (or a CD recorder) connected to the TAPE/CDR jacks and the VCR connected to the VCR jacks at the same time. While recording, you can listen to the selected sound source at whatever sound level you like without affecting the sound levels of the recording.
Note: The output volume level, tone adjustment (see page 20), and Surround/DSP modes (see pages 26 and 27) do not affect the recording.

0 (Canceled)

When the shut-off time comes, the receiver turns off automatically. To check or change the shut-off time, press SLEEP once. The remaining time (in minutes) until the shut-off time appears. To change the shut-off time, press SLEEP repeatedly. To cancel the Sleep Timer, press SLEEP repeatedly until SLEEP 0 MIN appears on the display. (The SLEEP indicator goes off.) Turning off the power also cancels the Sleep Timer.
11-17_RX-60_5030[J]f 14 02.12.2, 9:53

Basic Settings

Basic Settings Using MULTI JOG Dial
After connecting and placing speakers, you need to make basic settings for the following items according to your listening conditions. Speaker information (see the next column and page 16) Digital input terminal sources (see page 16) RX-6030VBK and RX-6032VSL only: Video input terminal type (see page 16) 7 Operating buttons
Turn MULTI JOG dial to adjust the selected item.
Select SUBWOOFER YES if a subwoofer is connected.
Basic Operations/Basic Settings
Ex.: When SUBWOOFER YES is selected.

Press EXIT.

Select digital input mode.

Press INPUT DIGITAL.

DIGITAL AUTO appears on the display. The DIGITAL AUTO indicator also lights up. To change the input mode back to analog input, press INPUT ANALOG. ANALOG appears on the display for a while. The ANALOG indicator lights up.
The ANALOG indicator and digital signal format indicators on the display indicate what type of signal comes into the receiver. ANALOG LINEAR PCM DIGITAL Lights when the analog input is selected. Lights when Linear PCM signals come in. Lights when Dolby Digital signals come in. Flashes when DOLBY DIGITAL is selected for software not encoded with Dolby Digital signals. Lights when DTS signals come in. Flashes when DTS SURROUND is selected for software not encoded with DTS signals.
Note: When DIGITAL AUTO cannot recognize the incoming signals, no digital signal indicators light up on the display.

Press ANALOG/DIGITAL.

Each time you press the button, the input mode alternates between the analog input (ANALOG) and the digital input (DIGITAL AUTO). DIGITAL AUTO Select this for the digital input mode. The receiver automatically detects the incoming signal format. ANALOG Select this for the analog input mode (initial setting).
11-17_RX-60_5030[J]f 17 02.11.28, 13:47

Sound Adjustments

INPUT ATT ADJUST

BASSBOOST

REMOTE CONTROL RM-SRX6030J

SUBWOOFER OUT ON/OFF

SET MULTI JOG dial
Attenuating the Input Signal
Notes: This button does not work when the subwoofer is set to NO (see page 15). In this case, NO SUBWOOFER will appear on the display for a while. You cannot turn off the subwoofer when the front speaker size is set to SMALL. When you change the subwoofer from NO to YES, the subwoofer is automatically turned on.
When the input level of the analog source is too high, the sound will be distorted. If this happens, you need to attenuate the input signal level to prevent the distortion. Once this has been adjusted, this receiver memorizes the adjustment for each source. Press and hold INPUT ATT on the front panel so that the INPUT ATT indicator lights up on the display. Each time you press and hold the button, the Input Attenuator mode turns on (INPUT ATT ON) or off (INPUT NORMAL).

Repeat steps 1 to 4 until you store all the stations you want.
Selecting the FM Reception Mode
When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode. You can store the FM reception mode for each preset station. (See page 22.) Press FM MODE while listening to an FM station.
To erase a stored preset station, store a new station on a used number. The station previously stored will be erased.
To Tune in to a Preset Station On the front panel
Each time you press the button, the FM reception mode alternates between AUTO and MONO. AUTO Normally select this (initial setting). When a program is broadcast in stereo, you will hear stereo sound; when in monaural, you will hear monaural sound. This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display. Select this to improve the reception (but stereo effect will be lost). In this mode, you will hear noise while tuning in to the station. The AUTO MUTING indicator goes off on the display. (The STEREO indicator goes off.)
Press FM or AM. The last received station of the selected band is tuned in.
Press FM/AM. The last received station of the last selected band is tuned in. Each time you press the button, the band alternates between FM and AM. MONO
Press FM/AM PRESET 5/ repeatedly until you find the channel you want.
18-23_RX-60_5030[J]f 23 02.11.28, 13:47
Creating Realistic Sound Fields
You can use the following Surround and DSP modes to reproduce a realistic sound field: Dolby Digital 5.1 channel encoding method (so-called discrete multi-channel digital audio format) records and digitally compresses the left front channel, right front channel, center channel, left surround channel, right surround channel, and LFE channel signals. Since each channel is completely independent from the other channel signals to avoid interference, you can obtain much better sound quality with many stereo and surround effects. When Dolby Digital signal comes in, the indicator lights up on the display.

Surround modes

7 Dolby Dolby Pro Logic II Dolby Digital 7 DTS Digital Surround

DSP modes

7 DAP modes 7 All Channel Stereo

DIGITAL

7 Dolby Dolby Pro Logic II* Dolby Pro Logic II has a multi-channel playback format to decode all 2 channel sourcesstereo source and Dolby Surround encoded sourceinto 5.1 channels. Matrix-based encoding/decoding method for Dolby Pro Logic II makes no limitation for the cutoff frequency of the rear treble and enables stereo rear sound compared to conventional Dolby Pro Logic. Dolby Pro Logic II enables reproduction of spacious sound from original sound without adding any new sounds and tonal colorations. Dolby Pro Logic II has two modesMovie mode and Music mode: Pro Logic II Movie (PL II MOVIE)suitable for the reproduction of Dolby Surround encoded sources bearing the DOLBY SURROUND. You can enjoy a sound field very close to mark the one created with discrete 5.1 channel sounds. Pro Logic II Music (PL II MUSIC)suitable for the reproduction of any 2 channel stereo music sources. You can enjoy wide and deep sound by using this mode. For this mode, Panorama control can be selected, which gives wraparound sound effect with side-wall image. When Dolby Pro Logic II is activated, the indicator lights up on the display. Dolby Digital* Used to reproduce multi-channel sound tracks of the software encoded with Dolby Digital ( ). To use software encoded with Dolby Digital, connect the source component to the digital terminal on the rear of this receiver. (See page 10.)

Dolby Digital software can roughly be grouped into two categories multi-channel (up to 5.1 channel) and 2 channel software. To enjoy surround sounds while playing Dolby Digital 2 channel software, you can use Dolby Pro Logic II.
7 DTS Digital Surround** Used to reproduce multi-channel sound tracks of software ). encoded with DTS Digital Surround ( To use software encoded with DTS Digital Surround, connect the source component to the digital terminal on the rear of this receiver. (See page 10.) DTS Digital Surround is another discrete multi-channel digital audio format available on CD, LD, and DVD software. Compared to Dolby Digital, the audio compression ratio is relatively low. This fact allows DTS Digital Surround format to add breadth and depth to the reproduced sounds. As a result, DTS Digital Surround features natural, solid, and clear sound. When DTS signal comes in, the the display. indicator lights up on
Typical multi-channel (5.1 channel) reproduction

PRO LOGIC II

Center speaker Left front speaker Subwoofer Right front speaker
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.
** DTS and DTS Digital Surround are registered trademarks of Digital Theater Systems, Inc.
24-27_RX-60_5030[J]f 24 02.11.28, 13:48
7 DAP (Digital Acoustic Processor) modes DAP modes have been designed to create important acoustic surround elements. The sound heard in a live club, dance club, hall or pavilion consists of direct sound and indirect soundearly reflections and reflections from behind. Direct sounds reach the listener directly without any reflection. On the other hand, indirect sounds are delayed by the distances of the ceiling and walls (see the diagram on the right). These indirect sounds are important elements of the acoustic surround effects. The DAP mode can reproduce a realistic sound field by adding these indirect sounds. DAP modes can be used when the front and surround speakers are connected to this receiver (without respect to the center speaker connection: no sound comes out of the center speaker even if it is connected). The following DAP modes are provided with this receiver: LIVE CLUB Gives the feeling of a live music club with a low ceiling. Gives clear vocal and the feeling of a concert hall. Gives the spacious feeling of a pavilion with a high ceiling.

Creating sound field

Reflections from behind Early reflections

Direct sounds

7 All Channel Stereo This mode can reproduce a larger stereo sound field using all the connected (and activated) speakers. All Channel Stereo can be used when the front and surround speakers are connected to this receiver without respect to the center speaker connection. If the center speaker is connected and activated, the same phase of the front left and right signals is emitted through the center speaker. All Channel Stereo can be used while reproducing 2 channel stereo software, either analog or digital except Dolby Digital and DTS. When All Channel Stereo is selected, the DSP indicator lights up on the display.

When your CATV converter turns on or off, you have entered the correct codes. If more than one code is listed for your brand of CATV converter, try each one until the correct one is entered. Manufacturers codes for CATV converter Manufacturer Echostar General Instrument Hamlin Pioneer RCA Scient Sony Zenith
* 01 is the initial setting.
After pressing TV SOUND, you can perform the following operations on the TV: 1 9, 0, +10 (100+) ENTER (10)
Note: Refer also to the manual supplied with your TV.
Select a channel. Function as the ENTER button. Codes 01* 02, 03, 04, 05, 06, 07, 08, 09 16, 17, 18, 19 14, 10, 12, 13
6 Try to operate your TV by pressing STANDBY/ON TV/CATV.
When your TV turns on or off, you have entered the correct codes. If more than one code is listed for your brand of TV, try each one until the correct one is entered. Manufacturers codes for TV Manufacturer JVC Hitachi Magnavox Mitsubishi Panasonic RCA Samsung Sanyo Sharp Sony Toshiba Zenith

Codes 01* 03 04, 08 09

Manufacturers codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
28-39_RX-60_5030[J]f 35 02.11.28, 13:48
To change the transmission signals for operating a VCR To change the transmission signals for operating a DVD player
1 Press and hold STANDBY/ON VCR. 2 Press VCR. 3 Enter manufacturers codes using buttons 1 9, and 0. 4 Release STANDBY/ON VCR.
Now, you can perform the following operations on the VCR. STANDBY/ON VCR CH +/ VCR Turn on or off the VCR. Change the channels.
1 Press and hold STANDBY/ON DVD. 2 Press DVD. 3 Enter manufacturers codes using buttons 1 9, and 0. 4 Release STANDBY/ON DVD.
Now, you can use the following buttons on the DVD player. Start playback. Stop playback. Skip to the beginning of the next chapters. Return to the beginning of the current (or previous) chapters. Pause playback. To release, press 3.

TEST FRONT L FRONT R

After pressing VCR, you can perform the following operations on the VCR: 3 FF REW REC PAUSE Start playback. Fastwind a tape. Rewind a tape. Stop playback or recording. Pause playback. To release, press 3. Press this button to enter recording pause. Then press 3 to start recording.
Note: Refer also to the manual supplied with your VCR.

MENU 32 5//3/2

Display or hide the menu screen. Select an item on the menu screen.
5 Try to operate your VCR by pressing VCR. STANDBY/ON
When your VCR turns on or off, you have entered the correct codes. If more than one code is listed for your brand of VCR, try each one until the correct one is entered. Manufacturers codes for VCR Manufacturer JVC Emerson Gold Star Hitachi Mitsubishi NEC Panasonic Philips RCA Samsung Sanyo Sony Zenith
ENTER (10) Enter a selected item.
5 Try to operate your DVD player by pressing DVD. STANDBY/ON

When your DVD player turns on or off, you have entered the correct codes. Manufacturers codes for DVD player Manufacturer JVC Panasonic Philips Pioneer Sony Toshiba Yamaha

Codes 01* 06 07

Codes 01*, 02, 03 10, 21 07, 05, 17, 18, 19 14, 15, 16 08
28-39_RX-60_5030[J]f 36 02.11.28, 13:48

Troubleshooting

Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC service center.
PROBLEM The power does not come on. No sound from speakers. POSSIBLE CAUSE The power cord is not plugged in. Speaker signal cables are not connected. An incorrect source is selected. Muting is activated. An incorrect input mode (analog or digital) is selected. Connections are incorrect. SOLUTION Plug the power cord into an AC outlet. Check speaker wiring and reconnect if necessary. Select the correct source. Press MUTING on the remote control to cancel the mute. Select the correct input mode (analog or digital). Check connections. For analog connections, see pages 7 9. For digital connections, see page 10. Check speaker wiring and reconnect if necessary. Adjust the speaker output level (see pages 19 21). Press SPEAKERS ON/OFF on the front panel to activate the speakers (see page 13). Connect an outdoor FM antenna or contact your dealer. Select a new station. Check with your dealer to be sure you have the correct antenna. Check connections. Move the antenna farther from automobile traffic. 1. Press STANDBY/ON to turn off the receiver. on the front panel
Operating Other Manufacturers Video Equipment/Troubleshooting
Speaker signal cables are not connected properly. Sounds from speakers are heard unequally. No test tone is available. Continuous hiss or buzzing during FM reception. The speaker output level is not set correctly. The speakers are deactivated. Incoming signal is too weak. The station is too far away. The wrong antenna is being used. Antennas are not connected properly. Occasional cracking noise during FM reception. OVERLOAD starts flashing on the display. Ignition noise from automobiles. Speakers are overloaded because of high volume.
2. Stop the playback source. 3. Turn on the receiver again, and adjust the volume. Speakers are overloaded because of short circuit of speaker terminals. Press STANDBY/ON on the front panel, then check the speaker wiring. If OVERLOAD does not disappear after turning on the receiver again, unplug the AC power cord, then plug it back in again. If speaker wiring is not short-circuited, contact your dealer. on the front panel to Press STANDBY/ON turn off the receiver. After unplugging the power cord, consult your dealer. on the front panel to Press STANDBY/ON turn off the receiver. After unplugging the power cord, consult your dealer. Remove the obstruction. Replace batteries in the remote control. Press SOUND or source selection buttons first, then press the button you want to use. (See pages 32 36).

Caution: Proper Ventilation To avoid risk of electric shock and fire and to protect from damage. Locate the apparatus as follows: Front: No obstructions open spacing. Sides: No obstructions in 10 cm from the sides. Top: No obstructions in 10 cm from the top. Back: No obstructions in 15 cm from the back. Bottom: No obstructions, place on the level surface. In addition, maintain the best possible air circulation as illustrated. Attention: Ventilation Correcte Pour viter les chocs lectriques, lincendie et tout autre dgt. Disposer lappareil en tenant compte des impratifs suivants Avant: Rien ne doit gner le dgagement Flancs: Laisser 10 cm de dgagement latral Dessus: Laisser 10 cm de dgagement suprieur Arrire: Laisser 15 cm de dgagement arrire Dessous: Rien ne doit obstruer par dessous; poser lappareil sur une surface plate. Veiller galement ce que lair circule le mieux possible comme illustr.
Spacing 15 cm or more Dgagement de 15 cm ou plus
Front Avant Stand height: 15 cm or more Hauteur du socle: 15 cm ou plus
Wall or obstructions Mur, ou obstruction

Floor Plancher

Safety_RX-60_5030[C]f

02.12.24, 18:42

Operating Audio Components.. 32 Operating Video Components.. 35
Operating Other Manufacturers Video Equipment.. 36 Troubleshooting... 38 Specifications.. 39
This mark indicates that the remote control CANNOT be used for the operation explained. Use the buttons on the front panel. Features with this mark are provided ONLY for RX-6030VBK and RX-6032VSL.
EN01-10_RX-60_5030[C]f 1 03.1.7, 15:52

English

EN01-10_RX-60_5030[C]f 2 02.12.24, 18:40
See pages in parentheses for details. 1 TV/CATV selector (36) keys for selecting preset channels (23) 10 keys for sound adjustment (20, 21) 10 keys for operating audio/video components (32 36) 3 SOUND button (20, 21) 4 REC PAUSE button (34, 35, 37) 5 Source selection buttons (11) TAPE/CDR, CD, DVD, DVD MULTI*, FM/AM, TV SOUND, VCR 6 FM MODE button (23) 7 SURROUND button (26) 8 DIMMER button (13) 9 TV/VIDEO button (35, 36) 0 VCR CH +/ buttons (35, 37) - TV/CATV CH +/ buttons (35, 36) buttons (11, 35 37) = STANDBY/ON AUDIO, TV/CATV, VCR, DVD ~ SLEEP button (14) ! Operating buttons for audio/video components 3, 8, 7, /4, FF/REW (33 35, 37) @ CD-DISC button (33) # ANALOG/DIGITAL button (17) $ SURROUND/DSP OFF button (26, 27) % DSP button (27) ^ MUTING button (13) & BASSBOOST* button (18) * VOLUME +/ button (13) ( TV VOLUME +/ buttons (35, 36)

EN01-10_RX-60_5030[C]f 3 02.12.24, 18:40
EN01-10_RX-60_5030[C]f 4 02.12.24, 18:40
DO NOT insert any metal object into the unit. DO NOT disassemble the unit or remove screws, covers, or cabinet. DO NOT expose the unit to rain or moisture.
EN01-10_RX-60_5030[C]f 5 02.12.24, 18:40
EN01-10_RX-60_5030[C]f 6 02.12.24, 18:40
*You can connect these components using the methods described in Analog Connections (below) and/or in Digital Connections (see page 10).
EN01-10_RX-60_5030[C]f 7 02.12.24, 18:40
EN01-10_RX-60_5030[C]f 8 02.12.24, 18:40
EN01-10_RX-60_5030[C]f 9 02.12.24, 18:40
Notes: When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components: DIGITAL 1 (coaxial): For DVD player DIGITAL 2 (optical): For CD player When you want to operate the CD player or CD recorder using the COMPU LINK remote control system, connect the target component also as described in Analog Connections (see page 7). When you want to operate the DVD player using the AV COMPU LINK remote control system, connect the DVD player also as described in Analog Connections (see page 9).
EN01-10_RX-60_5030[C]f 10 02.12.24, 18:40
EN11-17_RX-60_5030[C]f 11 02.12.24, 18:40
Press TAPE/CDR (SOURCE NAME) on the front panel.
Make sure TAPE appears on the display.
Press again and hold SOURCE NAME (TAPE/CDR) on the front panel until ASSIGN CDR appears on the display.
To change the source name from CDR to TAPE, repeat the same procedure above (in step 1, make sure CDR appears on the display).
EN11-17_RX-60_5030[C]f 12 02.12.24, 18:40
EN11-17_RX-60_5030[C]f 13 02.12.24, 18:40
When the shut-off time comes, the receiver turns off automatically. To check or change the shut-off time, press SLEEP once. The remaining time (in minutes) until the shut-off time appears. To change the shut-off time, press SLEEP repeatedly. To cancel the Sleep Timer, press SLEEP repeatedly until SLEEP 0MIN appears on the display. (The SLEEP indicator goes off.) Turning off the power also cancels the Sleep Timer.

EN11-17_RX-60_5030[C]f 14 02.12.24, 18:40
SUBWOOFER O FRNT SPEAKERS O CNTR SPEAKER O SURR SPEAKERS O DISTANCE UNIT O FRNT DISTANCE O CNTR DISTANCE O SURR DISTANCE O CROSSOVER O LFE ATTENUATE O D_COMPRESSION O DIGITAL IN O VIDEO IN DVD* O VIDEO IN VCR* O (back to the beginning)
EN11-17_RX-60_5030[C]f 15 02.12.24, 18:40
EN11-17_RX-60_5030[C]f 16 02.12.24, 18:40
Note: When you turn off the power or select another source, DOLBY DIGITAL or DTS SURROUND is canceled and the digital input mode is automatically reset to DIGITAL AUTO.
Note: When DIGITAL AUTO cannot recognize the incoming signals, no digital signal format indicators light up on the display.
EN11-17_RX-60_5030[C]f 17 02.12.24, 18:40
Notes: This button does not work when the subwoofer is set to NO (see page 15). In this case, NO SUBWOOFER will appear on the display for a while. You cannot turn off subwoofer output when the front speaker size is set to SMALL. When you change the subwoofer setting from NO to YES, subwoofer output is automatically turned on.
When the subwoofer is set to YES (see page 15), you can choose to turn off subwoofer output. Press SUBWOOFER OUT ON/OFF on the front panel to turn off the subwoofer. SUBWOOFER OFF appears on the display for a while and the S.WFR indicator goes off.
EN18-23_RX-60_5030[C]f 18 02.12.24, 18:41
BASS O TREBLE O SUBWFR LEVEL* O FRONT L LEVEL O FRONT R LEVEL O CENTER LEVEL* O SURR L LEVEL* O SURR R LEVEL* O EFFECT* O PANORAMA CTRL* O (back to the beginning)
* These items may not be selected depending on how the following are set: Subwoofer setting Speaker size setting The current Surround/DSP mode For details, see the next page and Adjustable items and selected Surround/DSP mode on page 27.

Buttons ADJUST MULTI JOG

To do Enter the receiver into the sound adjusting mode. Select an item to adjust after pressing ADJUST. Adjust the selected item after pressing SET. Determine the item to adjust. Exit from the sound adjusting mode or return to the previous step.
EN18-23_RX-60_5030[C]f 19 02.12.24, 18:41
EN18-23_RX-60_5030[C]f 20 02.12.24, 18:41
Make sure the subwoofer setting is set to YES (see page 15).
Press one of the following buttons: FRONT L FRONT R CENTER SURR L SURR R Left front speaker Right front speaker Center speaker Left surround speaker Right surround speaker When you use the 10 keys to operate your target source after sound adjustments, press the source selection button first so that the 10 keys work for the target source.

EN28-40_RX-60_5030[C]f 33 02.12.24, 18:41
You can always use the following buttons: FM/AM

TV CATV

Alternate between FM and AM.
REW FF REW FF REC PAUSE DISPLAY MODE CDDISC REC PAUSE DISPLAY MODE CDDISC
After pressing TAPE/CDR, you can use the following buttons for the cassette deck operations: 3 FF REW 7 Start playback. Fast wind a tape from left to right. Fast wind a tape from right to left. Stop playback or recording. Pause playback. To release, press 3.
EN28-40_RX-60_5030[C]f 34 02.12.24, 18:41
You can always use the following buttons: STANDBY/ON VCR CH +/ VCR Turn on or off the VCR. Change the TV channels on the VCR.
After pressing VCR, you can use the following buttons for the VCR operations: 3 FF REW 1 9, 0 Start playback. Fast wind a tape. Rewind a tape. Stop playback or recording. Pause playback. To release, press 3. Select a TV channel on the VCR. Press this button to enter recording pause. Press this button then 3 to start recording.
You can always use the following buttons: STANDBY/ON DVD Turn on or off the DVD player.
After pressing DVD (or DVD MULTI*) of the source selection buttons, you can use the following buttons for the DVD operations: Start playback. Return to the beginning of the current (or previous) chapters. Skip to the beginning of the next chapters. Stop playback. Pause playback. To release, press 3.

VOLUME

You can always use the following buttons: STANDBY/ON TV/VIDEO TV VOLUME +/ TV/CATV CH +/ TV/CATV Turn on or off the TV. Change the input mode (TV tuner and video input). Adjust the volume. Change the channels. MENU 5//3/2 After pressing TV SOUND, you can use the following buttons for the TV and CATV operations: 1 9, 0, +10 (100+) RETURN (10) Select a channel. Function as the RETURN button. ENTER (10)
EN28-40_RX-60_5030[C]f 35 02.12.24, 18:41
EN28-40_RX-60_5030[C]f 36 02.12.24, 18:41

MENU 5//3/2 32

EN28-40_RX-60_5030[C]f 37 02.12.24, 18:41
2. Stop the playback source. 3. Turn on the receiver again, and adjust the volume. Speakers are overloaded because of short circuit of speaker terminals. Press STANDBY/ON on the front panel, then check the speaker wiring. If OVERLOAD does not disappear after turning on the receiver again, unplug the AC power cord, then plug it back in again. If speaker wiring is not short-circuited, contact your dealer. on the front panel to Press STANDBY/ON turn off the receiver. After unplugging the power cord, consult your dealer. on the front panel to Press STANDBY/ON turn off the receiver. After unplugging the power cord, consult your dealer. Remove the obstruction. Replace batteries in the remote control. Press SOUND or source selection buttons first, then press the button you want to use. (See pages 32 37).

AV COMPU LINK AV COMPU LINK
DVD, VCR, TV SOUND, CD, TAPE/CDR, FM/AM DVD, VCR, TV SOUND, CD, TAPE/CDR, FM/AM
Remote control unit __ RM-SRX603OJ for RX-603OVBK RM-SRX6032J for RX-6032VSL RM-SRX503OJ for RX-5030VBK/RX-5032VSL BASSBOOST button X DVD MULTI button X

RX-6030VBK

is mainly used for illustrations to explain the connections and operations throughout the instructions.
See pages in parentheses for details. I1_ STANDBY/ON _/I button and STANDBY lamp (11 ) I_ SURROUND/DSP OFF button (26, 27) I_1 DSP button (27) 141 SURROUND button (26) 151 Remote sensor (10) 161 Display (For details, see "Display" on the next page.) ITL INPUT ANALOG button (17) INPUT ATT button (18) 181 INPUT DIGITAL button (17) 19_ DIMMER button (13) I_0_MASTER VOLUME control (13) lill PHONES jack (13) I;2_ SPEAKERS ON/OFF button (13) 1_31 SUBWOOFER OUT ON/OFF button (18) 1_4_ FM/AM TUNING A/v buttons (22) I;5L FM/AM PRESET A/_" buttons (23)
/f6l FM MODE button (23) /f?l MEMORY button (22, 23) /fS] SETTING button (15) i9 SET button (15, 19) /20l MULTI JOG dial (15, 19) /2;1 EXIT button (15, 19) /221ADJUST button (19) /z3 For RX-6030VBK and RX-6032VSL Source selection buttons (11) DVD MULTI, DVD, VCR, TV SOUND, CD, TAPE/CDR, FM, AM SOURCE NAME button (12) /24 For RX-5030VBK and RX-5032VSL Source selection buttons (11) DVD, VCR, TV SOUND, CD, TAPE/CDR, FM/AM SOURCE NAME button (12)
See pages in parentheses for details. Q_ ANALOG indicator (17) _2_ DIGITAL AUTO indicator (17) _3_SPK indicator (13) _4_Speaker indicators and signal indicators (27) _5_1"3['1 PRO LOGIC II indicator (24, 26) _6_ DSP indicator (25, 27) _7_ H.PHONE indicator (13) _8_RX-6030VBK and RX-6032VSL only: BASS BOOST indicator (18)
_9_TUNED indicator (22) _ INPUT ATT indicator (18) _ STEREO indicator (22) _2_AUTO MUTING indicator (23) _ SLEEP indicator (14) _-_ VOLUME indicator (13) L_ Digital signal format indicators (17) _ CH- indicator (22) @ Main display

Remote Control

See pages in parentheses for details. _ TV/CATV selector (35) _2_ 10 keys for selecting preset channels (23) 10 keys for sound adjustment (20, 21) 10 keys for operating audio/video components (32 - 36) _3_ SOUND button (20, 21) _4_ REC PAUSE button (33, 34) _5_ Source selection buttons (11 ) TAPE/CDR, CD, DVD, DVD MULTI _, FM/AM, TV SOUND, VCR _6_ FM MODE button (23) _7_ SURROUND button (26) _8_ DIMMER button (13) _9_TV/VIDEO button (34, 35) _ VCR CH +/- buttons (34, 36) _ TV/CATV CH +/- buttons (34, 35) _-2_STANDBY/ON (b/I buttons (11, 34-36) AUDIO, TV/CATV, VCR, DVD _ SLEEP button (14) _-_ Operating buttons for audio/video components _, H, m, J,_4/_, FF/REW (33, 34, 36) _ CD-DISC button (33) _ ANALOG/DIGITAL button (17) @ SURROUND/DSP OFF button (26, 27) @ DSP button (27) _ MUTING button (13) BASSBOOST button (18) @ VOLUME +/-button (13) _ TV VOLUME +/- buttons (34, 35)

You can turn off the volume temporarily. Press MUTING on the remote control to mute the sound through all speakers or headphones. "MUTING" appears on the display and the volume turns off (the VOLUME indicator goes off).

IIl_.,ll==,=,,_J_ll

I: F'J_I=. I,%=.]=[_"= =_ v--
You must turn off the speakers when you listen with headphones.

==, _,[] I'IUT !NB

To restore the sound, press MUTING again. The VOLUME indicator lights up on the display. Turning MASTER VOLUME control on the front panel or pressing VOLUME +/- on the remote control also restores the sound.

1 Press SPEAKERS

ON/OFF

on the front

panel.
"HEADPHONE" appears on the display for a while. The SPK indicator goes off and the H.PHONE indicator lights up.

HE R ,3PHI31qE

This cancels the Surround/DSP modes currently selected and activates the HEADPHONE mode (see below).
2 Connect a pair of headphones to the PHONES jack on the front panel.

HEADPHONE mode

You can dim the display. Press DIMMER. Each time you press the button, the display dims and brightens alternately.
When using the headphones, the following signals are sent to the headphones regardless of your speaker setting: -For 2 channel sources, the front left and right channel signals are sent directly to the headphones. -For multi-channel sources, the front left/right, center, and surround left/right channel signals are down-mixed and then sent to the headphones. You can enjoy multi-channel sound sources using the headphones.
Note: While in the HEADPHONE modes (see page 24). mode, you cannot use any Surround/DSP
Basic adjustment auto memory This receiver memorizes sound settings for each source when--: you turn off the power, you change the source, and you assign the source name. When you change the source, the memorized settings for the newly selected source are automatically recalled. The following can be stored for each source: Input attenuator mode (see page 18) Tone adjustment (see page 20) Speaker output level (see page 20) Surround/DSP mode selection (see pages 26 and 27) RX-6030VBK and RX-6032VSL only: BASS BOOST (see page 18)
You can fall asleep while listening to music--Sleep

Timer.

Selecting the Digital Input Terminals m DIGITAL IN
When you use the digital input terminals, register which components are connected to which terminals (DIGITAL 1/2) so that the correct source name will appear when you select the digital source. Select the appropriate option from the following: 1DVD2CD Z 1CD2DVD Z 1TV2DVD Z 1CDR2DVDZ (back to the beg
Note: When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components: DIGITAL I (coaxial): For DVD player DIGITAL 2 (optical): For CD player
"METER" the initial Note:
for the unit and "3.0m" settings.

("lOFT")

for all speakers
1DVD2TV 1CD2TV 1TV2CD 1CDR2CDZ nn rig)
Z1DVD2CDRZ z1CD2CDR Z1TV2CDR 1CDR2TV
If you have selected "NONE" for the center and surround speakers setting, you cannot set the speaker distance for the center and surround speakers.

Crossover

frequency--CROSSOVER
Small speakers cannot reproduce the bass sounds efficiently. If you use a small speaker in any position, this receiver automatically reallocates the bass sound elements assigned to the small speaker to other large speakers. To use this function properly, set the crossover frequency according to the table below: Crossover frequency 80HZ 100RZ 120RZ 150RZ 200HZ Size of cone speaker unit built in the small speaker about 12 cm (4 % inches) about 10 cm (3 _5/16 inches) (initial setting) about 8 cm (3 3/16inches) about 6 cm (2 3/16inches) less than 5 cm (2 inches)
Selecting the Video Input Terminal-VIDEO IN DVD, VIDEO IN VCR

RX.6032V ONLY

This receiver is equipped with component video input terminals which give you higher picture quality for the DVD player and VCR. When you use the component video input terminals for the DVD player and/or VCR, change the video input terminal setting to use the AV COMPU LINK remote control system correctly (see page 30). COMPONENT Select this when you connect the DVD player and/or VCR to the component video input terminals. Select this when you connect the DVD player anoVor VCR to the S-video or composite video input terminal (initial setting).
SIC If you have selected "LARGE" for all speakers, this function will not take effect ("CROSS OFF" appears). Low Frequency Effect attenuator--LFE ATTENUATE

If the bass sound is distorted while playing back software encoded with Dolby Digital or DTS Digital Surround, select "-10dB" to activate the Low Frequency Effect attenuator. This function takes effect only when the LFE signals come in. 0dB -10dB Normally select this (initial setting). Select this when the bass sound is distorted.

INPUT DIGITAL

INPUT ANALOG
When you have connected digital source components using both the analog connection (see pages 7 - 9) and the digital connection (see page 10) methods, you need to select the input mode correctly. Press one of the source selection buttons--
If the following symptoms occur while playing Dolby Digital or DTS encoded software with "DIGITAL AUTO" selected, change the digital input mode. Sound does not come out at the beginning of playback. Noise comes out while searching or skipping chapters or tracks.
DVD, TV SOUND, CD, or TAPE/CDR*--for which you want to change the input mode.
Note: * Among the sources listed above, you can select the digital input only for the sources for which you have selected the digital input terminals, (See "Selecting the Digital Input Terminals--DIGITAL IN" on page 16.)
Press INPUT select "DOLBY DIGITAL' or "DTS I_l repeatedly to DIGITAL on the front panel SURROUND." Each time you press the button, the digital input mode changes as follows: DIGITAL AUTO _ t_ DOLBY DIGITAL

DTS SURROUND _1

To play back software encoded with Dolby Digital, select "DOLBY DIGITAL." To play back software encoded with DTS Digital Surround, select "DTS SURROUND."
Note: When you turn off the power or select another source, "DOLBY DIGITAL" and "DTS SURROUND" are canceled and the digital input mode is automatically reset to "DIGITAL AUTO."
Select digital input mode. Onthefront panel Press INPUT DIGITAL. "DIGITAL AUTO"appears on the display. The DIGITAL AUTO indicator also lights up. TOchange the input mode back to analog input, press INPUT ANALOG. "ANALOG" appears on the display for a while. The ANALOG indicator lights up. Fromthe remotecontrol Press ANALOG/DIGITAL. Each time you press the button, the input mode alternates between the analog input ("ANALOG") and the digital input ("DIGITAL AUTO").
DIGITAL AUTO Select this for the digital input mode. The receiver automatically detects the incoming signal format. Select this for the analog input mode (initial setting).
The ANALOG indicator and digital signal format indicators on the display indicate what type of signal comes into the receiver. ANALOG LINEAR PCM Nrl DIGITAL Lights when the analog input is selected. Lights when Linear PCM signals come in. Lights when Dolby Digital signals come in. Flashes when "DOLBY DIGITAl" is selected for software not encoded with Dolby Digital signals. Lights when DTS signals come in. Flashes when "DTS SURROUND" is selected for software not encoded with DTS signals.

Note: When "DIGITAL AUTO"cannot recognize the incoming signals, no digital signal indicators light up on the displa_

ANALOG

1"7

INPUT ATT

ADJUST

ooo ooo

BASSBOOST

aEMOTECONTaO_ m_

SUBWOOFER OUT ON/OFF

IT MULTI JOG

Notes: This button does not work when the subwoofer is set to "NO" (see page 15). In this case, "NO SUBWOOFER" will appear on the display for a while. You cannot turn off the subwoofer when the front speaker size is set to "SMALL." When you change the subwoofer from "NO" to 'YES," the subwoofer is automatically turned on,
When the input level of the analog source is too high, the sound will be distorted. If this happens, you need to attenuate the input signal level to prevent the distortion. Once this has been adjusted, this receiver memorizes the adjustment for each source. Press and hold INPUT ATT on the front panel so that the INPUT ATT indicator lights up on the display. Each time you press and hold the button, the Input Attenuator mode turns on ("INPUT ATT ON") or off ("INPUT NORMAL').
Note: When selecting "DVD MULTI" (RX-603OVBK and RX-6032VSL as the source, this effect does not work, only)

I:t_Tt_l[q

_ I :_tL'_,
You can boost the bass level. Once you have adjusted the bass boost level, this receiver memorizes the adjustment for each source. Press BASSBOOST on the remote control to select the bass boost function. Each time you press the button, the bass boost function turns on and off. BASSBOOST ON Select this to activate the bass boost function. The BASS BOOST indicator lights up on the display. Select this to cancel it. The BASS BOOST indicator goes off.
When the subwoofer is set to "YES" (see page 15), you can choose to turn off the subwoofer. Press SUBWOOFER OUT ON/OFF on the front panel to turn off the subwoofer. "SUBWOOFER OFF" appears on the display for a while and the _ indicator goes off.
Note: This function affects the front speakers sound only.

5U I,4DDFER

The subwoofer sound comes out of the front speakers. To turn on the subwoofer, press the button again.
You can adjust the sound using MULTI JOG dial on the front panel. Tone--BASS+ TREBLE Subwoofer output leveI_--SUBWFR LEVEL Speakers' output level +FRONT L!R LEVEL, CENTER LEVEL, SURR L!R LEVEL Effect level for DAP modes--EFFECT Panorama control for Pro Logic II Music--PANORAMA CTRL BASS _- TREBLE FRONT L LEVEL z CENTER LEVEL + SURR R LEVEL_ PANORAMA __ _- SUBWFR LEVEL + z FRONT R LEVEL __ SURR L LEVEL+ EFFECT+ __ (back to the beginnning)

speaker output level (-10 to +10).
When you press the button once, the current setting of the selected speaker appears on the display and a test tone comes out of the selected speaker. "0" is the initial setting for all speakers. ,,-=. am

[] D F

F_UI_I
Ex.: When you press FRONT L in step 2. Repeat steps 3 and 4 to adjust other speaker output levels so that you can hear the tone through all the speakers at an equal level.

"_c_"

10 keys ----

FM/AM --

FM/AM TUNING A/V FM/AM PRESET A/V FM MODE MEMORY FM MODE --

@ooo oooo

i iTI_TI_j hil [_ I-._
hV_ tl"_!lffl_vj F I
Once a station is assigned to a channel number, the station can be quickly tuned in.You can preset up to 30 FM and 15 AM stations.
I Select the band (FM or AM). RX-6030VBI(/RX-6032VSL Press FM or AM on the front panel. The last received station of the selected band is tuned in.
When using the remote control, press FM/AM. The last received station of the last selected band is tuned in. Each time you press the button, the band alternates between FM and AM.
To Store the Preset Stations I_l Before you start, remember. There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 2.

I Tune in to the station

RX-5030VBI(/RX-5032VSL Press FM/AM. The last received station of the last selected band is tuned in. Each time you press the button, the band alternates between FM and AM. --= _,[] "-= '=_ "=_.

you want to preset

(see "Tuning in to Stations Manually").
If you want to store the FM reception mode for this station, select the FM reception mode you want. See "Selecting the FM Reception Mode" on page 23.
2 Press MEMORY. The CH- indicator lights up and the channel number position will flash on the display for about 5 seconds.

MHZ20 875

Ex.: When the FM band is selected.

""

"20
2 Press FM/AM TUNING repeatedly want.

on the front panel

Ex.: When the FM band is selected in step f.
until you find the frequency
When you hold FM/AM TUNING A/T in step 2, the frequency keeps changing until a station is tuned in, When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display When an FM stereo program is received, the STEREO indicator also lights up.
3 Press FM/AM PRESET A/v to select a channel number while the channel number position is flashing.

1 Press

FM/AM to select the band (FM or AM). The last received station of the last selected band is tuned in and the 10 keys now work for the tuner operation. Each time you press the button, the band alternates between FM and AM.

Available

Surround/DSP

for each

input signal
PL II MOVIE x PL II MUSIC x LIVE CLUB x DANCE CLUB x

x : Not available

s Dolby Digital (Multi-channel Dolby Digital (2 channel) DTS Digital Surround (Multi-channel) DTS Digital Surround (2 channel) Linear PCM Analog

SURROUND OFF (stereo) O

DOLBY DIGITAL O

DTS SURROUND x

HALL x

PAVILION x

ALL OH STEREO x

Creating

Realistic

Sound Fields

DSP SURROUND

-----SURROUND/DSP OFF

t________!

SURROUND/DSP OFF

2 Press SURROUND,
Speaker layouts required for Surround modes are as follows: 5 channels (Front, center, and surround speakers are connected.) The appropriate Surround mode will be activated according to the incoming signal. DOLBY DIGITAL: Activated if you are playing back multi-channel software encoded with Dolby Digital. DTS SURROUND: Activated if you are playing back software encoded with DTS Digital Surround. PL II MUSIC or PL II MOVIE: Activated if you are playing back any software other than the above. (The last one selected will be activated.) The NR PRO LOGIC II indicator lights up on the display. Press SURROUND repeatedly to select the one appropriate for the source. When "PL fl MUSIC" is selected, you can select Panorama control to enjoy 'Wraparound'sound effect with side-wal! image (see page 19 for the setting procedure).
Notes: When "DOLBY DIGITAL"or "DTS SURROUND'is selected with
4 channels (Front and surround speakers are connected.)
3 channels (Front and center speakers are connected.)

= Operating

procedure
no surround speakers connected, the surround sounds are downmixed and output from the front speakers. For the available Surround modes according to the input signals, see "Available Surround/DSP modes for each input signal" on

Select the source

When you select "DVD MULTI" as the source to play, Surround/ DSP mode is canceled, and SURROUND and DSP buttons do not work,

2 Select the analog

discrete

output

mode on
the DVD player, and start playing a DVD. Refer also to the manual supplied withthe DVD player.

If you want to adjust

the sound,

see pages 19 to 21.

Once you have made adjustments, the receiver retains the adjustments until you change them.
The COMPU LINK remote control system allows you to operate JVC's audio components through the remote sensor on the receiver. To use this remote control system, you need to connect JVC's audio components through the COMPU LINK-4 (SYNCHRO) jacks (see below) in addition to the connections using cables with RCA pin plugs (see page 7). Make sure that the AC power cords of these components are unplugged before connection. Plug in the AC power cords only after all other connections are completed.
Automatic SourceSelection
When you press the play (_) button on a connected component or on its own remote control, the receiver automatically turns on and changes the source to the component. On the other hand, if you select a new source on the receiver or on the remote control, the selected component begins playing immediately. In both cases, the previously selected source continues playing without sound for a few seconds.

"o i

Automatic PowerOn/Off(Standby): nlypossible o with the COMPU LINK-3and COMPU LINK-4
Cassette deck CD player Both the CD player and cassette deck (or CD recorder) turn on and off (standby) along with the receiver. When you turn on the receiver, the CD player or cassette deck (or CD recorder) will turn on automatically, depending on which component has been previously selected. When you turn off the receiver, both the CD player and cassette deck (or CD recorder) will turn off (standby). Synchronized Recording Synchronized recording means the cassette deck starts recording as soon as a CD begins playing. To use synchronized recording, follow these steps:

"o

Put a tape in the cassette the CD player. 2 Press the record (o) button
Notes: There are four versions of the COMPU LINK remote control system. This receiver is equipped with the fourth version_OMPU LINK-4. This version adds systematic operations with the CD recorder to the previous version_OMPU LINK-3. If your audio component has two COMPU LINK jacks, you can use either one. If it has only one COMPU LINK jack, connect it so that it is the last item in the series of components, To operate the cassette deck or CD recorder using the COMPU LINK remote control system, set the source name correctl_z (See page 12.) Refer also to the manuals supplied with your audio components.

your DVD player by pressing _o/i DVD.
When your DVD player turns on or off, you have entered the correct codes.
Manufacturers' Manufacturer JVC Panasenic Philips Pioneer Sony Toshiba Yamaha "01" is the initial setting. 01 _ codes for DVD player Codes
Manufacturers' codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC service center. PROBLEM The power does not come on. No sound from speakers. POSSIBLE CAUSE The power cord is not plugged in. Speaker signal cables are not connected. An incorrect source is selected. Muting is activated. An incorrect input mode (analog or digital) is selected. Connections are incorrect. SOLUTION Plug the power cord into an AC outlet. Check speaker wiring and reconnect if necessary. Select the correct source. Press MUTING on the remote control to cancel the mute. Select the correct input mode (analog or digital). Check connections. For analog connections, see pages 7 - 9. For digital connections, see page 10. Check speaker wiring and reconnect if necessary. Adjust the speaker output level (see pages 19 -21). Press SPEAKERS ON/OFF on the front panel to activate the speakers (see page 13). Connect an outdoor FM antenna or contact your dealer. Select a new station. Check with your dealer to be sure you have the correct antenna. Check connections. Move the antenna farther from automobile traffic. 1. Press STANDBY/ON dOllon the front panel to turn oft the receiver. 2. Stop the playback source. 3. Turn on the receiver again, and adjust the volume. Speakers are overloaded because of short circuit of speaker terminals. Press STANDBY/ON dOllon the front panel, then check the speaker wiring. If "OVERLOAD" does not disappear after turning on the receiver again, unplug the AC power cord, then plug it back in again. If speaker wiring is not short-circuited, contact your dealer. Press STANDBY/ON dOllon the front panel to turn off the receiver. After unplugging the power cord, consult your dealer. Press STANDBY/ON dO/Ion the front panel to turn off the receiver. After unplugging the power cord, consult your dealer. Remove the obstruction. Replace batteries in the remote control. Press SOUND or source selection buttons first, then press the button you want to use. (See pages 32 - 36).
Speaker signal cables are not connected properly. Sounds from speakers are heard unequally, No test tone is available. Continuous hiss or buzzing during FM reception. The speaker output level is not set correctly. The speakers are deactivated. Incoming signal is too weak. The station is too far away. The wrong antenna is being used. Antennas are not connected properly. Occasional cracking noise during FM reception, "OVERLOAD" starts flashing on the display. Ignition noise from automobiles. Speakers are overloaded because of high volume.

* *.*. * *. * _

. IS ** * ** *. * _ *. * * *
** THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY * LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
* JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER * DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE ** TOTAPES, RECORDSORDISCS)RESULTINGFROMTHEUSEOFTHISPRODUCT, ORARISINGOUTOFANYBREACH * OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANT** ABILITY AN D FITNESS FOR PARTICU LAR PURPOSE, ARE LIMITED TO THE WAR RANTY PERIOD SET FORTH ABOVE. *Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific * legal rights and you may also have other rights which *. vary from state to state. 1700 Valley Road Wayne, NJ 07470
JVC COMPANY OF AMERICA DIVISION OF JVC AMERICAS CORP.
***--**********--**********--*********************************************
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION PACKAGED WITH EACH REFURBISHED PRODUCT. For customer use: Enter below the Model No. which is located either on the rear, bottom for future reference. Model No. : data : or side of the cabinet. Retain this information
Serial No. : Name of dealer :

Purchase

Authorized

Service Centers

QUALITY

http://www.jvc.com

SERVICE
HOW TO LOCATE YOUR JVC SERVICE CENTER
TOLL FREE: 1 (800) 537-5722
Dear Customer, In order to receive the most satisfaction from your purchase,please read the instruction booklet before operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest authorized servicer or visit our website at www.JVC.eom Remember to retain your Bill of Sale for Warranty Service.
Do not service the television

yourself

Caution To prevent electrical shock,do not open the cabinet.There are no user serviceable parts inside.Please refer to qualified service personnel for repairs.
Accessories To purchase accessories for your on the web at www.JVC.com JVC product,please call toll free:l (800)882-2345 or
! Warnings, Cautiens, and Others/ Mises en garde, pr6cautions et indications

diverses

TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications manufacturer for compliance operate the equipment. not expressly approved by the could void the user's authority to

Stand height: 15 cm or more cm ou plus Hp_uteur du socle:

Floor PIancher

Operating JVC's Audio/Video Components.. Operating Audio Components Operating Video Components Operating Other Equipment Troubleshooting Specifications... Video

Differences Main unit

RX-603OVBKiRX-6032VSL
and RX-503OVBK/RX-5032VSL O: Supplied x : Not supplied Bass boost function Selectable source
Remote control unit __ RM-SRX6030J for RX-6030VBK RM-SRX6032J for RX-6032VSL RM-SRX5030J for RX-5030VBK/RX-5032VSL BASSBOOST button X DVD MULTI button X

|dentification

See pages in parentheses for details. Q_ ANALOG indicator (17) _2_ DIGITAL AUTO indicator (17) _3_SPK indicator (13) _4_Speaker indicators and signal indicators (27) _5_1"3['1 PRO LOGIC II indicator (24, 26) _6_ DSP indicator (25, 27) _7_ H.PHONE indicator (13) _8_RX-6030VBK and RX-6032VSL only: BASS BOOST indicator (18) _9_TUNED indicator (22) _ INPUT ATT indicator (18) _ STEREO indicator (22) _2_AUTO MUTING indicator (23) _ SLEEP indicator (14) _-_ VOLUME indicator (13) L_ Digital signal format indicators (17) _ CH- indicator (22) @ Main display
See pages in parentheses for details. _ TV/CATV selector (36) _2_ 10 keys for selecting preset channels (23) 10 keys for sound adjustment (20, 21) 10 keys for operating audio/video components (32 - 36) _3_ SOUND button (20, 21) _4_ REC PAUSE button (34, 35, 37) _5_ Source selection buttons (11 ) TAPE/CDR, CD, DVD, DVD MULTI _, FM/AM, TV SOUND, VCR _6_ FM MODE button (23) _7_ SURROUND button (26) _8_ DIMMER button (13) _9_TV/VIDEO button (35, 36) _ VCR CH +/- buttons (35, 37) _ TV/CATV CH +/- buttons (35, 36) _-2_STANDBY/ON (b/I buttons (11, 35 -37) AUDIO, TV/CATV, VCR, DVD _ SLEEP button (14) _-_ Operating buttons for audio/video components _, H, m, _,_4/_, FF/REW (33 - 35, 37) _ CD-DISC button (33) _ ANALOG/DIGITAL button (17) @ SURROUND/DSP OFF button (26, 27) @ DSP button (27) _ MUTING button (13) BASSBOOST button (18) @ VOLUME +/-button (13) _ TV VOLUME +/- buttons (35, 36)

Selecting VIDEO IN

Terminalm

__v [_ J

IN VCR
This receiver is equipped with component video input terminals which give you higher picture quality for the DVD player and VCR. When you use the component video input terminals for the DVD player and/or VCR, change the video input terminal setting to use the AV COMPU LINK remote control system correctly (see page 30). COMPONENT Select this when you connect the DVD player and/or VCR to the component video input terminals. Select this when you connect the DVD player anoVorVCR to the S-video or composite video input terminal (initial setting).
Note: When you turn off the power or select another source, "DOLBY DIGITAL" or "DTS SURROUND" is canceled and the digital input mode is automatically reset to "DIGITAL AUTO."
Note: When "DIGITAL AUTO"cannot digital signal format indicators recognize the incoming signals, no light up on the displa_

Sound Adjustments

INPUT ATT ADJUST

RX-6030V RX-6032V ONLY

aEraTE CONTaO_ m_

EXIT MULTI JOG dial

Notes: This button does not work when the subwoofer is set to "NO" (see page 15). In this case, "NO SUBWOOFER" will appear on the display for a while. You cannot turn off subwoofer output when the front speaker size is set to "SMALL." When you change the subwoofer setting from "NO" to "YES," subwoofer output is automatically turned on.
You can boost the bass level. Once you have adjusted the bass boost level, this receiver memorizes the adjustment for each source. Press BASSBOOST on the remote control to select the bass boost function. Each time you press the button, the bass boost function turns on and off. BASSBOOST ON
When the subwoofer is set to "YES" (see page 15), you can choose to turn off subwoofer output. Press SUBWOOFER OUT ON/OFF on the front panel to turn off the subwoofer. "SUBWOOFER OFF" appears on the display for a while and the _ indicator goes off.

,ill /iii (

_,i_RF_
To change the transmission operating a CATV converter ! SetTV/CATV selector
to "CATV." _/i TV/CATV.
2 Press and hold STANDBY/ON 3 PressTV SOUND.
4 Enter manufacturer's 1 - 9, and 0.

codes using buttons

To change the transmission operating a 13/ ! Set TV/CATV selector
5 Release STANDBY/ON 0/i TV/CATV. Now, you can performthe following operations on the CATV converter. STANDBY/ON Oil TV/CATV Turnon or off the CATV converter. TV/CATV OH +/Change the channels.
to "TV" O/I TV/CATV.
4 Enter manufacturer's 1 - 9, and O.
Note: Refer also to the manual supplied with your CATV converte_
5 Release STANDBY/ON _/i TV/CATV. Now, you can perform the following operations on the TV. STANDBWON d_)/I TV/CATV Turn on or off the TV. TVNIDEO TV VOLUME +/TV/CATV OH +/Set the input mode (either TV or VIDEO). Adjust the volume. Change the channels.
by pressing STANDBY/ON _b/iTV/CATV. When your CATV converter turns on or off, you have entered the correct codes.
If more than one code is listed for your brand of CATV converter, try each one until the correct one is entered. Manufacturers' Manufacturer Echostar General Instrument Hamlin Pioneer RCA Scient Sony Zenith "01" is the initial setting. 01 02, 03, 04, 05, 06, 07, 08, 09 16, 17, 18, 19 14, 10, 12, 13 codes for CATV converter Codes
After pressing TV SOUND, you can perform the following operations on the TV: 1 - 9, 0, +10 (100+) ENTER (10) Note: Refer also to the manual supplied with your TV Select a channel. Function as the ENTER button.
yourTV by pressing _)/I TV/CATV.
When your TV turns on or off, you have entered the correct codes. If more than one code is listed for your brand of TV, try each one until the correct one is entered. Manufacturers' Manufacturer JVC Hitachi Magnavox Mitsubishi Panasonic RCA Samsung Sanyo Sharp Sony Toshiba Zenith
"01 "is the initial setting,

codes forTV Codes

04, Manufacturers' codes are subject to change without notice, If they are changed, this remote control cannot operate the equipment.

signals for O/i VCR.

2 Press DVD. codes using buttons 3 Enter manufacturer's 1 - 9, and 0. codes using buttons
Release STANDBY/ON _/i VCR. Now, you can perform the following operations on the VCR. STANDBY/ON (b/I VCR VCR OH +/Turn on or off the VCR. Change the channels.
4 Release STANDBY/ON O/i DVD. Now, you can use the following buttons on the DVD player. Start playback. Stop playback. Skip to the beginning of the next chapters. Return to the beginning of the current (or previous) chapters. n Pause playback.To release, press 1,,-.