Reviews & Opinions
Independent and trusted. Read before buy JVC RX-7040B-rx-7040!

JVC RX-7040B-rx-7040

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
JVC RX-7040B-rx-7040 - Instruction Manual, size: 4.1 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

About JVC RX-7040B-rx-7040
Here you can find all about JVC RX-7040B-rx-7040 like manual and other informations. For example: review.

JVC RX-7040B-rx-7040 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a JVC RX-7040B-rx-7040 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your JVC RX-7040B-rx-7040 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
fdrake 12:30am on Friday, August 13th, 2010 
Uh-oh no video conversion (composite to s-video/component) i got this receiver a few weeks ago and hooked it up with no problems. unfortunately.
fi85511 2:24pm on Wednesday, July 28th, 2010 
Uh-oh no video conversion (composite to s-video/component) i got this receiver a few weeks ago and hooked it up with no problems. unfortunately.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Features... 2 Precautions... 2

Basic Settings.. 21

Quick Speaker Setup... 21 Basic Setting Items.. 22 Basic Procedure.. 23 Setting the speakers... 23 Setting the speaker distance.. 24 Setting the bass sounds.. 24 Selecting the main or sub channel.. 25 Setting for easy and effective surround operations. 25 Setting the digital input terminals.. 25 Setting the component video input. 26 Memorizing the volume level for each source. 26
Parts Identification.. 3 Getting Started.. 6
Checking the Supplied Accessories.. 6 Putting Batteries in the Remote Control. 6 Connecting the FM and AM Antennas.. 6 Connecting the Speakers and Subwoofer.. 7 Connecting Audio/Video Components.. Analog connections.. Digital connections... 12 Connecting the Power Cord... 12

Adjusting Sound.. 27

Basic Adjustment Items.. 27 Basic Procedure.. 27 Adjusting the equalization patterns. 28 Adjusting the speaker output levels.. 28 Adjusting the sound parameters for the surround and DSP modes.. 28

Basic Operations.. 13

Daily Operational Procedure.. 13 Turning On the Power.. 13 Selecting the Source to Play... 13 Adjusting the Volume... 14 Selecting the Front Speakers.. 15 Turning On and Off the Subwoofer Sound.. 15 Selecting the Analog or Digital Input Mode.. 15 Setting the Dynamic Range.. 16 Attenuating the Input Signal.. 16 Turning Analog Direct On and Off.. 17 Making Sounds Natural.. 17 Changing the Source Name.. 17 Reinforcing the Bass... 18 Muting the Sound... 18 Changing the Display Brightness.. 18 Using the Sleep Timer.. 18
Using the Surround Modes. 30
Reproducing Theater Ambience.. 30 Introducing the Surround Modes.. 30 Surround Modes Applicable to the Various Software. 32 Activating the Surround Modes.. Activating the EX/ES setting.. Activating the surround modes automatically. Activating the surround modes manually.. 33

Using the DSP Modes.. 34

Reproducing the Sound Field... 34 Introducing the DSP Modes... 34 Activating the DSP Modes.. 35

TV and/or DBS tuner

When connecting the TV to the AUDIO jacks (TV SOUND/DBS IN), DO NOT connect the TVs video output to these video input jacks.
Connect the TV to appropriate MONITOR OUT jacks to view the playback picture from any other connected video components.
To audio output To component video input To S-video input To composite video input
VCR To audio input To audio output To S-video output To composite video output To S-video input To composite video input To component video output

A B C D E F G

DBS(VCR) IN

DBS tuner

To audio output To component video output To S-video output To composite video output

R L R L

When connecting a VCR to component video input jacks, make the component video input setting (VIDEO IN VCR) correctly for AV COMPU LINK. See page 26 for details. When make the component video input setting for a VCR (VIDEO IN VCR) correctly, the component video input setting for a DBS tuner (VIDEO IN DBS) is not available.
When connecting a DBS tuner to the TV SOUND/DBS IN jacks, change the source name to DBS, which will be shown on the display when it is selected as the source. Otherwise you cannot view any picture from DBS tuner. See page 17 for details. When connecting a DBS tuner to component video input jacks, make the component video input setting (VIDEO IN DBS) correctly for AV COMPU LINK. See page 26 for details. When make the component video input setting for a DBS tuner (VIDEO IN DBS) correctly, the component video input setting for a VCR (VIDEO IN VCR) is not available.
01-12_7040[J] 10 04.1.21, 15:54
DVD player To enjoy Dolby Digital and DTS multi-channel software (including Dual Mono software), connect the DVD player through the digital or analog discrete (DVD MULTI) terminals. When you connect a DVD player with stereo output jacks:

COMPONENT VIDEO DVD IN

When you connect a DVD player with its analog discrete output (5.1-channel reproduction) jacks: This connection is the best connection method for enjoying DVD Audio sounds. When a DVD Audio disc is played back, the original highquality sounds can be reproduced only using this connection.

AUDIO SUBWOOFER CENTER

DVD player

A B C D

To component video output To S-video output To composite video output To left/right front channel audio output (or to audiomixed output if necessary)

When DVD MULTI is selected as the source, L, C, R, LFE, LS, and RS light up.
Always set the volume to the minimum before starting any sources. If the volume is set at its high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.
How to understand the speaker and signal indicator illumination
Ex. No sound comes out of the center speaker and surround back speakers though center channel and surround back channel signals are coming into this receiver.
13-18_7040[J] 14 04.1.21, 15:54
Selecting the Front Speakers
Turning On and Off the Subwoofer Sound
When you have connected two pairs of the front speakers, you can select which to use.
You can cancel the subwoofer sound output even though you have connected a subwoofer and have set SUB WOOFER to YES (see page 23).
To use the speakers connected to the FRONT SPEAKERS 1 terminals, press SPEAKERS ON/OFF 1 so that the SPEAKERS 1 indicator lights up on the display. Make sure that the SPEAKERS 2 indicator is not lit. To use the speakers connected to the FRONT SPEAKERS 2 terminals, press SPEAKERS ON/OFF 2 so that the SPEAKERS 2 indicator lights up on the display. Make sure that the SPEAKERS 1 indicator is not lit. To use both sets of the speakers connected to the FRONT SPEAKERS 1 and 2 terminals, press SPEAKERS ON/OFF 1 and 2 so that the SPEAKERS 1/2 indicators light up on the display.
Press SUBWOOFER OUT ON/OFF to cancel the subwoofer sound output. Each time you press the button, subwoofer sound output is deactivated (SUBWFR OFF) and activated (SUBWFR ON) alternately. When subwoofer output is canceled, the SUBWFR indicator goes off. Bass sounds (and LFE signals) will be emitted through the front speakers (except for DVD MULTI playback mode). When subwoofer sound output is activated, subwoofer output level can be adjusted (see pages 28 and 29).

L R LINEAR PCM

SPEAKERS VOLUME
Ex. When both sets of the speakers selected.
When playback analog sources or digital 2-channel software and neither Surround/DSP mode is selected, you can use both sets of the front speakers.
SUBWOOFER OUT ON/OFF button does not work when you set SMALL for the front speakers on the Speaker size setting (see page 23) or using Quick Speaker Setup (see page 21). You cannot activate the subwoofer output when you have set SUB WOOFER to NO (see pages 21 and 23). When you change the SUB WOOFER setting from NO to YES (see page 23), subwoofer output is automatically activated.

To use neither sets of the speakers connected to the FRONT SPEAKERS 1 and 2 terminals, press SPEAKERS ON/OFF 1 and 2 so that the SPEAKERS 1/2 indicators go off from the display. The HEADPHONE indicator lights up and HEADPHONE appears on the display. Activating the speakers turns on the Surround and DSP modes previously selected.
Selecting the Analog or Digital Input Mode
When you have connected digital source components using the digital terminals (see page 12), change the input mode for these components to the digital input mode.
Listening with headphones only:
Deactivate both sets of the front speakers, and connect headphones to the PHONES jack. Make sure that all the Speaker indicators are not lit. You can enjoy the sound effects through the headphones when Surround or DSP mode is activated3D Headphone (3D H PHONE) mode. 3D H PHONE appears and the DSP and HEADPHONE indicators light up on the display. (For details, see page 32.) Before you start, remember. The digital input terminal setting should be correctly done for the sources you want to select the digital input mode (see Setting the digital input terminals on pages 25 and 26).
3D Headphone (3D H PHONE) mode is not valid for DVD MULTI playback mode.
1. Press one of the source selection buttons (DVD, VCR, TV SOUND/DBS, CD, or TAPE/CDR*) for which you want to change the input mode.
* If TAPE is selected as the source, digital input mode is not available. To change the source name to CDR, see Changing the Source Name on page 17.
Be sure to turn down the volume: Before connecting or putting on headphones, as its high volume can damage both the headphones and your hearing. Before turning on the speakers again, as its high volume may come out of the speakers.
Continued on the next page
13-18_7040[J] 15 04.1.21, 15:54
2. Press INPUT DIGITAL to select DGTL AUTO.
When using the remote control, press ANALOG/DIGITAL INPUT. Each time you press the button, the analog (ANALOG) and digital (DGTL AUTO) input modes alternate. The DIGITAL AUTO indicator lights up on the display.

DIGITAL AUTO

To select the analog input mode again Press INPUT ANALOG (or press ANALOG/DIGITAL INPUT on the remote control repeatedly until ANALOG appears on the display). The ANALOG indicator lights up.
13-18_7040[J] 16 04.1.21, 15:54
Turning Analog Direct On and Off
You can enjoy the sound closer to the original source by overriding the sound adjustments such as Midnight Mode (see page 16), Bass Boost (see page 18), Equalization pattern (see page 28), speaker output level adjustments (see page 28), and Surround and DSP modes (see pages 30 to 35). You can only adjust the volume level and the subwoofer output level while Analog Direct is in use. Once you have made an adjustment, it is memorized for each analog source.

Changing the Source Name

When you have connected a CD recorder to the TAPE/CDR IN jacks or a DBS tuner to the TV SOUND/DBS IN jacks on the rear panel, change the source name which will be shown on the display.
When changing the source name from TV to DBS:
1. Press TV SOUND/DBS. Make sure TV appears on the display. 2. Press and hold TV SOUND/DBS until ASSGN DBS appears on the display.
Press ANALOG DIRECT so that A DIRECT appears on the display. The lamp on the button also lights up. Each time you press the button, Analog Direct turns on and off (the lamp goes off) alternately.
When digital input mode is in use, Analog Direct is not available. Turning on Surround or DSP mode cancels Analog Direct and previously selected sound adjustments are recalled. If Analog Direct is in use, Midnight Mode (see page 16) is temporarily canceled. Turning on Analog Direct cancels Input Attenuator (see page 16) and CC Converter (see below).
When connecting a DBS tuner to the TV SOUND/DBS IN jacks, change the source name to DBS, which will be shown on the display when selected as the source. Otherwise, you cannot view any picture from DBS tuner.
When changing the source name from TAPE to CDR:
1. Press TAPE/CDR. Make sure TAPE appears on the display.

Making Sounds Natural

JVCs CC (Compensative Compression) Converter eliminates jitter and ripples, achieving a drastic reduction in digital distortion by processing the digital music data in 24 bit-quantization and by expanding the sampling frequency to 128 kHz (for fs 32 kHz signals)/176.4 kHz (for fs 44.1 kHz signals)/192 kHz (for fs 48 kHz signals) on the front speakers. By using CC Converter, you can obtain a natural sound field from both digital and analog sources.

2.0CH 2.1CH 3.0CH 3.1CH 4.0CH 4.1CH 5.0CH 5.1CH 6.0CH* 6.1CH 7.0CH 7.1CH (Back to the beginning)
* 6.0CH is the initial setting.
21-26_7040[J] 21 04.1.21, 15:54
Speakers (channels) number and the size You can find how each of the speaker size is defined according to the number of connected speakers (speaker channel CH number) you select. Subwoofer is counted as 0.1 channel.
The size of connected speakers CH 2.0CH 2.1CH 3.0CH 3.1CH 4.0CH 4.1CH 5.0CH 5.1CH 6.0CH 6.1CH 7.0CH 7.1CH L/R LARGE SMALL LARGE SMALL LARGE SMALL LARGE SMALL LARGE SMALL LARGE SMALL C NONE NONE SMALL SMALL NONE NONE SMALL SMALL SMALL SMALL SMALL SMALL LS/RS NONE NONE NONE NONE SMALL SMALL SMALL SMALL SMALL SMALL SMALL SMALL SB NONE NONE NONE NONE NONE NONE NONE NONE SMALL SMALL SMALL* SMALL* SUBWFR NO YES NO YES NO YES NO YES NO YES NO YES

Basic Setting Items

On the following pages, you can adjust the following items: You can only select the items currently available. For details, see the explanation of each item. Items SUB WOOFER* CNTR SPEAKER* To do Register your subwoofer. Register your center speaker size. See page 24 24
FRONT SPEAKER* Register your front speaker size. SURR SPEAKER* Register your surround speaker size. SBACK SPEAKER* Register your surround back speaker size. SBACK OUT* DIST UNIT Register the number of the connected surround back speakers. Select the measuring unit for the speaker distance.
FRNTL DISTANCE* Register the distance from the left front speaker to your listening point. FRNTR DISTANCE* Register the distance from the right front speaker to your listening point. CNTR DISTANCE* Register the distance from the center speaker to your listening point. SURRL DISTANCE* Register the distance from the left surround speaker to your listening point. SURRR DISTANCE* Register the distance from the right surround speaker to your listening point. SBACK DISTANCE* Register the distance from the surround back speaker(s) to your listening point. S WFR OUTPUT CROSS OVER Select sounds emitted from the subwoofer. Select the cutoff frequency to the subwoofer. Select the Dual Mono sound channel. Select the component connected to digital coaxial terminal.

2. Turn MULTI JOG until an item you want appears on the display.
In this example, select ONE TOUCH OPE. For available items, see the list Basic Setting Items on page 22.
7 Speaker sizeFRONT SPEAKER, CNTR SPEAKER, SURR SPEAKER, SBACK SPEAKER Select the size for each connected speaker. LARGE*1 SMALL*2 NONE Select when the speaker size is relatively large. Select when the speaker size is relatively small. Select this when you have not connected a speaker. (Not selectable for the front speakers.)
3. Push in MULTI JOG (PUSH SET).
The current setting for the selected item appears on the display.
*1 Initial setting for front speakers. *2 Initial setting for center, surround, and surround back speakers.
4. Turn MULTI JOG until a setting you want appears on the display.
ANALOG ONE TOUCH OPERATION
Keep the following comments in mind as reference when adjusting. If the size of the cone speaker unit built in your speaker is larger than 12 cm (4 3/4 inches), select LARGE, and if it is smaller than 12 cm (4 3/4 inches), select SMALL. If you have selected NO for the subwoofer setting, you can only select LARGE for the front speakers. If you have selected SMALL for the front speakers, you cannot select LARGE for the center, surround, and surround back speakers. If you have selected SMALL for the surround speakers, you cannot select LARGE for the surround back speakers. If you have selected NONE for the surround speakers, the surround back speakers are fixed to NONE.
5. Push in MULTI JOG (PUSH SET).
7 Surround back speakers quantitySBACK OUT
6. Repeat steps 2 to 5 to set other items if necessary. 7. Press EXIT.
The source indication resumes on the display.
Select the number of the surround back speakers connected. SBACK OUT: 1SPK SBACK OUT: 2SPK Select to use 1 surround back speaker. Select to use 2 surround back speakers.
If you have selected NONE for the surround back speakers (see above), this setting is not available.
21-26_7040[J] 23 04.1.21, 15:54
Setting the speaker distance
The distance from your listening point to the speakers is another important element to obtain the best possible sound of the Surround and DSP modes. Set the distance from your listening point to the speakers. By referring to the speaker distance setting, this unit automatically sets the delay time of the sound through each speaker so that sounds through all the speakers can reach you at the same time. If you have used Quick Speaker Setup on page 21, this setting is not required. 7 Measuring unitDIST UNIT Select which measuring unit you use. DIST UNIT: meter DIST UNIT: feet Select to set the distance in meters. Select to set the distance in feet.

To do Adjust equalizer pattern at 63 Hz. Adjust equalizer pattern at 250 Hz. Adjust equalizer pattern at 1 kHz. Adjust equalizer pattern at 4 kHz. Adjust equalizer pattern at 16 kHz. Adjust the subwoofer output level. Adjust the left front speaker output level.
See page Ex. When adjusting the subwoofer level to 3. Before you start, remember. There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1. Press ADJUST.

L SUBWFR
Adjust the right front speaker output level. 28 Adjust the center speaker output level. Adjust the left surround speaker output level. Adjust the right surround speaker output level. Adjust the surround back speaker(s) output level. Adjust the effect level. Select the room size for your virtual listening room. Select the liveness level for your virtual listening room. Make the center tone soft or sharp.
In this example, select SUBWFR LVL. For available items, see the list Basic Adjustment Items.
The current setting (or level) for the selected item appears on the display.
PNRM CNTRL*2 Add wraparound sound effect with side-wall image. CNTR WIDTH*2 Adjust the center channel localization between the center speaker and the left/right front speakers. DIMENSION*2 CNTR GAIN*
4. Turn MULTI JOG to select a setting you want or to make an adjustment as you like.
Adjust sound localization position. Adjust sound localization of the center channel.
*1 Adjustable when one of the DAP modes or Mono Film (see pages 34 and 35) is in use. *2 Adjustable when Pro Logic II Music (see page 31) is in use. *3 Adjustable when Neo:6 Music (see page 31) is in use.
5. Press in MULTI JOG (PUSH SET). 6. Repeat steps 2 to 5 to set other items if necessary. 7. Press EXIT.
27-29_7040[J] 27 04.1.21, 15:54
Adjusting the equalization patterns
You can adjust the equalization patterns to your preference. Once you have made an adjustment, it is memorized for each source. The equalization pattern affects the front speaker sounds only. 7 Equalization adjustmentEQ 63Hz, EQ250Hz, EQ 1kHz, EQ 4kHz, EQ16kHz You can adjust five frequencies (63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz) within the range of 8 dB to +8 dB (0 (dB) is the initial setting) in 2 dB steps. When an adjustment is made, the D. EQ indicator lights up on the display. To flat the equalization pattern, set all the frequencies to 0 (dB) in step 4 of Basic Procedure (on page 27). The D. EQ indicator goes off from the display.

Adjusting the speaker output levels
You can adjust the speaker output levels. Once you have made an adjustment, it is memorized for each source. 7 Adjustable speakers You can adjust the following speakers output levels within the range of 10 dB to +10 dB (0 (dB) is the initial setting): SUBWFR LVL FRNT L LVL FRNT R LVL CENTER LVL SURR L LVL SURR R LVL Select to adjust the subwoofer output level. Select to adjust the left front speaker output level. Select to adjust the right front speaker output level. Select to adjust the center speaker output level. Select to adjust the left surround speaker output level. Select to adjust the right surround speaker output level. Select to adjust the surround back speaker output level.
When Analog Direct is in use, Equalization patterns are not available.
You can also use the remote control for equalization adjustment.

SBACK LVL

D.EQ FREQ

D.EQ LEVEL

If you have selected NO or NONE for a speaker (see page 23), the output level for the corresponding speaker is not adjustable. The center speaker and left/right surround speakers output levels are adjustable for DVD MULTI playback mode, even though NONE is selected for the speaker settings. Speaker output levels (except the subwoofer output level) are not adjustable when Analog Direct is in use. To adjust subwoofer output level, see page 15.
1. Press D.EQ FREQ (Digital Equalization Frequency) repeatedly to select the frequency you want to adjust. Each time you press the button, the frequency appears on the display. 2. Press D.EQ LEVEL + or repeatedly to adjust the frequency level. The current frequency level appears and the D. EQ indicator lights up on the display. The frequency level changes from 8 dB to +8 dB in 2 dB steps. 3. Repeat steps 1 and 2 to adjust the other frequency.
Adjusting the sound parameters for the surround and DSP modes
You can adjust the Surround and DSP sound parameters to your preference. (For Surround and DSP modes, see pages 30 to 35.) When center speaker is set to NONE, following items are not available: CTR TONE CNTR WIDTH CNTR GAIN 7 Adjustable parameters You can adjust the following parameters: For Surround and DSP modes (when the center speaker is connected) This setting is common to all surround modes, and is memorized separately for DSP modes. CTR TONE Adjust the center tone. As the number increases, the dialogue becomes clearer so that the human voices change from soft to sharp. (Adjustable range: 1 to 5. 3 is the initial setting, and normally select this.)

27-29_7040[J] 28 04.1.21, 15:54
For DAP modes and Mono Film Once you have made an adjustment, it is memorized for each mode. EFFECT Adjust the effect level. As the number increases, the effect becomes stronger. (Adjustable range: 1 to 5. 3 is the initial setting, and normally select this.) Adjust the virtual room size. As the number increases, the interval between reflections increases so that you will feel as if you were in a larger room. (Adjustable range: 1 to 5. 3 is the initial setting, and normally select this.) Adjust the liveness effect. As the number increases, the attenuation level of reflections over time decreases so that acoustics change from Dead to Live. (Adjustable range: 1 to 5. 3 is the initial setting, and normally select this.)
You can also use the remote control for adjusting the speaker output level and center tone.

CENTER TONE

CENTER

ROOMSIZE

LIVENESS
To adjust the speaker output level: 1. Press TEST to check if you can hear the sounds through all the speakers at equal level. Test tone comes out of the speakers in the following order. No test tone comes out of the speakers for which the speaker setting is set to NONE (or NO for the subwoofer).
FRNT L (Left front speaker) = CENTER (Center speaker) = FRNT R (Right front speaker) = SURR R (Right surround speaker) = SBACK (surround back speaker) = SURR L (Left surround speaker) = SUBWFR (Subwoofer) = (Back to the beginning)
For Pro Logic II Music only PNRM CNTRL Select ON to add wraparound sound effect with side-wall image. (Initial setting: OFF.) CNTR WIDTH Adjust the center channel localization between the center speaker and the left/right front speakers. As the number increases, the center channel sound moves toward the left and right speakers. (Adjustable range: OFF and 1 to 7. 3 is the initial setting, and normally select this.) DIMENSION Adjust the sound localization position. As the number increases, the sound localization moves towards forward from backward. (Adjustable range: 1 to 7. 4 is the initial setting, and normally select this.)
2. Adjust the speaker output level. Adjustable range: 10 dB to +10 dB. 0 (dB) is the initial setting. To adjust the left front speaker, press FRONT L + or. To adjust the center speaker, press CENTER + or. To adjust the right front speaker, press FRONT R + or. To adjust the right surround speaker, press SURR R + or. To adjust the surround back speaker, press S.BACK + or. To adjust the left surround speaker, press SURR L + or. To adjust the subwoofer, press SUBWFR + or.

Cassette deck or CD recorder

Synchronized Recording

Synchronized recording means the cassette deck starts recording as soon as a CD begins playing.
There are four versions of COMPU LINK remote control system. This receiver is equipped with the fourth versionCOMPU LINK-4. This version is added systematic operations with the CD recorder to the previous versionCOMPU LINK-3. If your audio component has two COMPU LINK jacks, you can use either one. If it has only one COMPU LINK jack, connect it so that it is the last item in the series of components. To operate the cassette deck or CD recorder using the COMPU LINK remote control system, set the source name correctly if required. (See page 17.) Refer also to the manuals supplied for your audio components.
To use synchronized recording, follow these steps:
1. Put a tape in the cassette deck, and a disc in the CD player. 2. Press the record () button and the pause (8) button on the cassette deck at the same time.
This puts the cassette deck into recording pause. If you do not press the record () button and pause (8) button at the same time, the synchronized recording feature will not operate.
3. Press the play (3) button on the CD player.
This remote control system allows you to use four functions listed below. The source changes on the receiver, and as soon as play starts, the cassette deck starts recording. When the play ends, the cassette deck enters recording pause, and stops about 4 seconds later.
Remote Control through the Remote Sensor on the Receiver You can control the connected audio components through the remote sensor on the receiver using this remote control. Aim the remote control directly at the remote sensor on the receiver. For details, see pages 40 and 41.
During synchronized recording, the selected source cannot be changed. If the power of any component is shut off during synchronized recording, the COMPU LINK remote control system may not operate properly. In this case, you must start again from the beginning.
37-37_7040[J] 37 04.1.21, 15:55
AV COMPU LINK Remote Control System
The AV COMPU LINK remote control system allows you to operate JVCs video components (TV, VCR, and DVD player) through the receiver.
This receiver is equipped with the AV COMPU LINK-III, which adds a function to operate JVCs video components through the video components terminals. To use this remote control system, connect the video components you want to operate, following the diagrams below and the procedure on the next page.
CONNECTIONS 1: AV COMPU LINK connection

CAUTION: VCR

AV COMPU LINK AV COMPU LINK
You can only connect to the TV with the AV COMPU LINK EX or AV COMPU LINK-III jack. DO NOT connect to the TV with AV COMPU LINK RECEIVER/AMP jack.

AV COMPU LINK EX

AV COMPU LINK-

Sound from one speaker only. NO SUBWFR appears on the display. Continuous hiss or buzzing during FM reception.
Speaker signal cables are not connected properly. SUBWOOFER OUT ON/OFF is pressed while SUB WOOFER is set to NO. Incoming signal is too weak. The station is too far away.
Noise is heard during FM/AM reception.
An incorrect antenna is used. Antennas are not connected properly. Ignition noise from automobiles.
No sound effect such as the Surround mode, DSP mode and equalization pattern. EX/ES (7.1-channel) reproduction cannot be done for Dolby Digital EX or DTS-ES software. OVERLOAD starts flashing on the display.
Analog Direct is turned on. DVD MULTI is selected as the source (except digital equalization). Software or setting is not for Dolby Digital-EX or DTS-ES software.
Speakers are overloaded because of high volume.
Speakers are overloaded because of short circuit of speaker terminals.
DSP NG starts flashing on the display.
The built-in microcomputer is not functioning correctly. Very high voltage or very low voltage is applied to the receiver, or built-in power amplifier becomes out of order. There is an obstruction between the remote sensor on the receiver and the remote control. Batteries are weak.
The STANDBY lamp lights up after turning on the power, and soon the receiver turns off again (into standby mode). Remote control does not work.
Replace batteries. (See page 6.) Select the correct remote control operation mode. (See pages 40 and 41.)
Remote control does not work as you intend.
An incorrect remote control operation mode is selected.
38-46_7040[J] 45 04.1.21, 15:55

Specifications

Amplifier Output Power At Stereo Operation Front Channel:
Video Video Input Sensitivity/Impedance Composite Video DVD IN, VCR IN, TV SOUND/DBS IN: 1 V(p-p)/75 S-video DVD IN, VCR IN, TV SOUND/DBS IN (Y: luminance): 1 V(p-p)/75 (C: chrominance, burst): 0.286 V(p-p)/75 Component Video DVD IN, DBS (VCR) IN (Y: luminance): 1 V(p-p)/75 0.7 V(p-p)/75 (PB/PR): Video Output Level Composite Video VCR OUT, MONITOR OUT: 1 V(p-p)/75 S-video VCR OUT, MONITOR OUT (Y: luminance): 1 V(p-p)/75 (C: chrominance, burst): 0.286 V(p-p)/75 Component Video MONITOR OUT (Y: luminance): 1 V(p-p)/75 0.7 V(p-p)/75 (PB/PR): Synchronization: Negative Signal-to-Noise Ratio: 45 dB

38-46_7040[J] 46 04.1.21, 15:55

LIMITED WARRANTY

AUDIO-2
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below. ("The Warranty Period")

LABOR YRS

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN COMMONWEALTH OF PUERTO RICO. WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and above which are covered on an in-home basis. WHAT YOU MUST DO FOR WARRANTY SERVICE: Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized service center, please call toll free: (800) 537-5722. If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location of which will be given to you by the toll-free number. If you have any questions concerning your JVC Product, please contact our Customer Relations Department. WHAT IS NOT COVERED: This limited warranty provided by JVC does not cover: 1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by JVC to render such service, or if affixed to any attachment not provided with the products, or if the model number or serial number has been altered, tampered with, defaced or removed; 2. Initial installation and installation and removal for repair; 3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning; 4. Damage that occurs in shipment, due to act of God, and cosmetic damage; 5. Signal reception problems and failures due to line power surge; 6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase; 7. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase); There are no express warranties except as listed above. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

 

Tags

Hdchs60 Avxl 89 DVD-7911N UE32C6710US OZ-290H SNR6500 KD-S676R P4S533-MX CDX-GT71W GCC-4520B Sandiego SX1 IS Flash Factures 5 Combo LE37A551 Jungle Beat Digital PRO ESC XL-UH220H 20-1933 TH-37PE50B KD-S737 PA500 25PT4457 58 ICD-MS1 800 VA SCM-810 650 WX 11 0 R-520LK 39 TDS Dvdr5520H-31 LE32M86BC BXR 60 Scale Handheld HDD070 X204N CFS-E2 YDS-10 Recorder Optio W80 STR-DN1010 Sc07 Benq X900 M10-S405 DEH-P5550MP Iriver S7 GTO2000 CCD-TRV35E Version 2 DVD-P270 M 250 S5620 Onix UA-1G Philips MZ-3 RT-40NZ60RB Soundcraft GB8 CIT200 Sportster 883R Av-32h5 ICD-R200 GSR600 Mobile 7 NEC DT20 System KDC-W3541 Lenovo G550 DVL-909 DR-MV150B X-845 ED-2200 CRW-5224A EMP-TW200 Urc-6540 CF-335T Mixer Practica T50 CT-S420 FWK5122 GN9350 LC-46D64U KG800S N670U WMH1164XW 240 E MP370 WMS801 DSR7005 710SK RX-V550 Review TB-303 Range2006-01 SAP DB 2022E HDR-UX19E L-558 ANT24-0801 DVD-P148

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101