Page 22Monday, 14 March 2005 10:42
DVM70AG_00.book Page 23 Monday, March 14, 2005 10:42 AM
Still Picture/Frame-By-Frame Playback

Resume Function

It is possible to memorise the position where you stop playback and resume playback from that position. Be sure to set ARESUMEB to AONB or ADISC RESUMEB. (A pg. 68) Resume function always works for DVD-R/DVD-RW discs that have not been finalised and DVD-RAM regardless of the setting of ARESUMEB.
Press W to pause during playback.
Press SLOW - (O) or SLOW + (N) to activate frame-byframe playback. Each press of SLOW - (O) or SLOW + (N) advances/ reverses the still picture frame by frame. Frame-by-frame playback for reverse direction cannot be performed with Video CD/SVCD discs. To resume normal playback, press I.
Press o during playback to memorise a resume point.
The unit enters Resume Stop mode and memorises the

Slow Motion

Press W to pause during playback. Press SLOW - (O) or SLOW + (N) for 2 or more seconds. slow motion speed for each direction.
Each press of SLOW - (O) or SLOW + (N) increases the Slow motion for reverse direction cannot be performed with

Video CD/SVCD discs.

Skip Search
During playback, press v. Each press initiates an approximately 30-second period of fastmotion playback. Normal playback resumes automatically. Skip search cannot be performed when a VCD/SVCD disc is being played back with the PBC function.

Jump Search

position where you have stopped playback as a resume point. (The inside of the disc status indicator on the front display panel blinks while memorising.) The unit retains a memory of the resume points of the last 30 discs played back, even though they have been ejected if ARESUMEB is set to ADISC RESUMEB. (A pg. 68) To clear the resume points: (The inside of the disc status indicator stops blinking and lights.) When ARESUMEB is set to AONB: Press A to turn off the unit. Press M to take out the disc. Press o in stop mode. Press TOP MENU to display the top menu, then start playback by selecting an item, etc. Press MENU to display the disc menu, then start playback by selecting an item, etc. When ARESUMEB is set to ADISC RESUMEB: Set ARESUMEB to AOFFB. (A pg. 68) Press o in stop mode. Press TOP MENU to display the top menu, then start playback by selecting an item, etc. Press MENU to display the disc menu, then start playback by selecting an item, etc.
Press I in stop mode to resume playback. The unit starts playback from the resume point.
You can locate a scene ahead or behind the current one by jumping scenes according to selected time intervals (A pg. 69) during playback (or Live Memory Playback). Press JUMP - or JUMP +. To advance forward or back, press JUMP - or JUMP + repeatedly within 5 seconds of each press to continue jump. Depending on the time from where you want to start jump search, the first press of JUMP - or JUMP + will not necessarily lead to a jump of the selected time interval. The first press will lead to a jump to the nearest quarter points of an hour (15 min/ 30 min/ 45 min/ 00 min). The subsequent jumps will then be in accordance to the selected time interval. When you cannot advance any further (beginning or end of programme reached), the message AUNABLE TO GO BACK ANY MOREB appears on the screen and the on-air screen resumes. In such a case, press S, O or o. Example: Playback search when jump interval is set to 15 MIN jumps. Taking for instance, you want to start jump search 40 minutes after the beginning of the programme. Pressing JUMP - or JUMP + will result in a jump to the scene at the 30 minutes point or 45 minutes point respectively as illustrated below. At the subsequent press, the scene will jump to the 15 minutes point or 1 hour point respectively, according to the selected time interval, which in this case is A15 MINB.

Some DVD VIDEO discs contain the multiple audio language or sound. You can select the desired audio language or sound. For some Video CD/SVCD discs, you can switch the audio channel to choose Karaoke either with or without the vocal.
Press SUBTITLE during playback. The subtitle selection display appears on the TV screen. Each time you press SUBTITLE, the subtitle display is switched on and off.

ENGLISH

When 3 subtitle languages are contained.
Press AUDIO during playback. The Audio Language/Sound selection display appears.

For example: DVD VIDEO

Press D E to select your desired language.
To clear the subtitle selection display, press ENTER.
NOTES: When A7B appears on the TV screen, no subtitle language is recorded. When the subtitle language wont be changed with the procedure above, change the subtitle on a disc menu displayed by pressing MENU.
Press AUDIO or D E to select When 3 audio languages are your desired audio language/ contained. sound. Each time you press AUDIO or D E, the audio language/sound changes. To clear the Audio Language/Sound selection display, press ENTER.

Audio Channel Selection

NOTES: When A7B appears on the TV screen, no audio language is recorded. When the audio language wont be changed with the procedure above, change the audio on a disc menu displayed by pressing MENU. Pressing AUDIO to select the audio language/sound is only possible during playback. It is not possible to select by pressing AUDIO in stop mode. However, you can select the desired audio language/sound from the setup menu while in stop mode.
When watching bilingual programmes or playing discs on which you recorded bilingual or stereo programmes, you can choose the desired audio channel. When ASUPERIMPOSEB is set to AONB or AAUTOB, you can confirm on the TV screen the audio channel you have chosen. (A pg. 69) Each time you press AUDIO, the audio channel changes. TRACK On-Screen Display For main audio of bilingual programme For sub audio of bilingual programme For stereo discs For audio of left channel For audio of right channel NOTE: It is not possible for DVD-R/DVD-RW (Video mode) disc playback to switch the audio channel. The audio channel is played back as set in AVIDEO MODE RECORDING AUDIOB setting. (A pg. 68) When you cant switch the audio channel of a bilingual programme When the unit is connected with a digital audio device using an optional optical cable and ADIGITAL AUDIO OUTB is set to ADOLBY DIGITAL/PCMB, it is not possible to switch the audio channel of a bilingual programme recorded on a DVD-RAM or DVD-RW (VR mode) disc. (A pg. 66) In this case, perform the following steps using the remote control to switch ADIGITAL AUDIO OUTB from ADOLBY DIGITAL/PCMB to APCM ONLYB. A Press SET UP to access the Main Menu screen. B Press D E to select ADVD VIDEO SET UPB, then press G. C Press D E to select AAUDIO OUTPUTB, then press G. D Press F G to select ADIGITAL AUDIO OUTB, then press ENTER. E Press F G to select APCM ONLYB, then press ENTER. (A pg. 67) F Press SET UP to complete the setting. G Press AUDIO to select the desired audio channel.

1 : 25 : 58

Press ENTER at the end of the desired part you want to repeat (point B). The elapsed playing time of the point B appears. The selected part of the disc (between point A and B) is played repeatedly.

1 : 40 : 00

To clear the on-screen bar Press ON SCREEN.
Page 27Monday, 14 March 2005 10:42
DVM70AG_00.book Page 28 Monday, March 14, 2005 10:42 AM
Simulated Surround Effect

0-9 CANCEL ENTER

It is possible to get a simulated surround effect from your stereo system. You can enjoy the virtual surround sound with your 2channel stereo system.

FGDE RETURN T

Press ON SCREEN twice to access the on-screen bar. Press D E to select A B, then press ENTER.
A3D-ONB appears above the selected item and Simulated
Surround Effect is activated.
Each time you press ENTER, A3D-ONB appears and disappears

alternately.

S I CLEAR
To clear the on-screen bar Press ON SCREEN. To cancel the simulated surround effect Press ENTER to clear A3D-ONB from the screen.

Time Search

You can play back a disc from the desired point by specifying the elapsed playing time from the beginning of a programme (DVD-RAM, DVD-R, DVD-RW, DVD VIDEO and HDD) or a disc (Video CD/SVCD and Audio CD).
Press ON SCREEN twice to access the on-screen bar. Press D E to select Aj9B, then press ENTER. The pop-up window appears under the selected item.

TITLE 99 DVDVIDEO

NOTES: Simulated Surround Effect works correctly only when playing back a title recorded in multichannels. Simulated Surround Effect does not affect the DVD VIDEO bitstream signal from the [DIGITAL AUDIO OUT] connectors. When Simulated Surround Effect is activated, the settings of AANALOG AUDIO OUTB and AD. RANGE CONTROLB are disabled. (A pg. 67) Simulated Surround Effect cannot be activated under the following conditions: When the HDD deck is in the recording mode. When the HDD or DVD deck is in the timer standby mode. When a disc containing both the Dolby Digital 5.1CH and 2CH sound formats is playing back a scene that is not in the 5.1CH sound format.

CINEMA AUTO

Adjusting The Picture Quality
Press the number keys to enter the time, then press ENTER. Playback starts from the specified time. Example: To play back from a point 12 (minutes): 50 (seconds) elapsed.
TIME Press 1 TIME Press 5 TIME TIME Press 0 TIME Press 2
You can obtain optimal picture quality by selecting an appropriate picture mode.
Press ON SCREEN twice to access the on-screen bar. Press D E to select A B, then press ENTER. The pop-up window appears under the selected item.

Press F G to select the desired option, then press ENTER. This mode automatically detects film and video content for progressive playback. When film content is found, flag detection is used to invoke playback of film data in full screen. When video content is found, pictures from multiple fields are used to detect sections with movement, and then this movement undergoes advanced image processing for output of sharp, detailed progressive images without any reduction in image quality where movement occurs. Normally, operation in this mode is recommended.

Random Playback

You can play back all the tracks on the disc in random order. While stopped
Press ON SCREEN twice to access the on-screen bar. Press D E to select ARNDB, then press ENTER. Playback starts in random order.
Suitable for playing back a progressive scanned film source disc.

VIDEO:

Suitable for playing back a video source disc. The outlines on the played back pictures will be soft. To clear the on-screen bar Press ON SCREEN. NOTE: When the progressive mode is set, be sure to set AL-1 OUTPUTB to ACOMPONENTB (A pg. 61). Progressive scan is output only from [COMPONENT VIDEO OUT] connectors.
To clear the on-screen bar Press ON SCREEN. To cancel Random Playback Perform steps 1 and 2. NOTE: The same track will not be played back more than once during Random Playback.

Programme Playback

Select The Switching Interval Of The Slide Show
You can programme up to 30 tracks (Video CD/SVCD or Audio CD) to play back in the desired order. While stopped
You can control the switching interval of the slide show.
Press ON SCREEN twice to access the on-screen bar. Press D E to select APRGMB, then press ENTER. The programme table appears under on-screen bar.
Press F G to select the desired option, then press ENTER. 5 SEC. Y 10 SEC. Y 15 SEC. Y 20 SEC. Y 25 SEC. Y SEC. Y (Back to the beginning) 30
Each time you press F G, the interval changes as follows:
Press the number keys to USE [0-9] KEYS TO SELECT TRACK enter the track numbers in the desired order. Examples: A To select track 5, press the number key A5B and ENTER. B To select track 15, press the Program Total Time number key A1B and A5B. C To select track 25, press the number key A2B and A5B.
To clear the on-screen bar Press ON SCREEN. NOTE: JPEG files are played back as a slide show. It may take more time to display an image with larger file size.
If you have specified a wrong selection Press CANCEL(L). The last selection is erased. Or press CLEAR (o). The whole selection is erased.
Page 29Monday, 14 March 2005 10:42

Page 41Monday, 14 March 2005 10:42
DVM70AG_00.book Page 42 Monday, March 14, 2005 10:42 AM
42 EN LIVE MEMORY PLAYBACK ON HDD/DVD DECK Temporary recording for Live Memory (HDD deck only)
This unit automatically records the channel being received, within the specified range of time, to the reserved space on the hard disc. The time range can be set for 30 minutes, 1 hour, and 3 hours. (A pg. 68) NOTE: Previous temporary recordings will be overwritten since the unit is always recording the channel being received. Thus, it is not possible to play back TV programmes recorded beyond the specified range of time since they are already overwritten. To avoid this in order to save titles, perform normal recording (A pg. 34), timer recording (A pg. 43, 45), or RetroActive Recording (A pg. 42). About limitation on temporary recording The temporary recording for Live Memory is cancelled in the following cases, and will start all over again when it is to resume. When the power is turned off When the system is powered again after a power failure was occurred When normal recording, timer recording, RetroActive Recording, or Automatic Satellite Programme Recording (A pg. 47) is performed When the ALIVE MEMORYB setting is changed (A pg. 68) When tuner channel setting is performed (A pg. 70) When dubbing is performed by pressing DUBBING (A pg. 55) When ADVB is selected by pressing PR +/- (A pg. 58)
Simultaneous Recording and Playback
You can play back the previous part of the channel you are recording or other programmes available in the Library Database.
Press NAVIGATION. The Library Database Navigation screen appears. Press D E to select AORIGINALB, then press ENTER. Press FGD E to select the desired title, then press ENTER. ACONTINUOUS PLAYB in ADVD SET UPB is set to AONB (A pg. 68).
For DVD-RAM, playback starts from the beginning of the title if
Press D E to select the desired playback method (ABEGINNINGB, ARESUMEB or AREPEATB), then press ENTER. Playback of the selected title begins automatically. Press o to stop playback.
The on-air screen resumes.

You can use various playback features during Live Memory
To stop simultaneous playback, press o. The on-air screen
resumes. To stop actual recording, press o again.
You can move back the playback position slightly during recording or Live Memory Playback. Press w on the remote control or INSTANT REPLAY on the unit. 8 DVD-RAM Pressing once during recording skips back for approximately 30 seconds and starts Live Memory Playback. While pressing once during Live Memory Playback skips back for approximately 7 seconds and resumes playback. Each subsequent press skips back for approximately 7 seconds and resumes playback. Pressing while paused skips back for approximately 7 seconds and resumes pause.
Pressing during recording skips back for approximately 7
RetroActive Recording (HDD deck only)
You can start recording from the previous part of the channel you are currently watching (temporarily recorded on the background). (A pg. 42, ATemporary recording for Live Memory (HDD deck only)B)
Press S or O to locate the point to start recording from. Press R on the unit to start RetroActive Recording. Or while holding R, press I on the remote control. Press o to stop RetroActive Recording.
Each press of O increases the reverse search speed.
NOTES: You cannot use RetroActive Recording for channels other than the channel you are currently watching. Recording speed is automatically set to FR65 mode when RetroActive Recording is started. Temporarily recorded data prior to the beginning of RetroActive Recording is erased when RetroActive Recording started.
seconds and starts Live Memory Playback. While pressing during Live Memory Playback skips back for approximately 7 seconds and resumes playback. Each press skips back for approximately 7 seconds and resumes playback. Pressing while paused skips back for approximately 7 seconds and resumes pause.
Resuming Playback (HDD deck only)
You can resume playback of a TV broadcast you were recording or watching from the point you have paused.
Press W to pause a TV broadcast. Press I to start Live Memory Playback. Press o to resume the on-air screen.
Recording continues when recording. Playback resumes from the paused position.

Tuesdays programme Overwritten Mondays programme

For the DVD deck

ONCE (One Time Recording) WEEKLY (Weekly Recording) MON-SUN/ MON-SAT/ MON-FRI (Daily Recording)
Page 44Monday, 14 March 2005 10:42
DVM70AG_00.book Page 45 Monday, March 14, 2005 10:42 AM

Manual Timer Programming

You can programme this unit to timer-record as many as 16 programmes. If you do not know the G-CODE number for the programme you wish to record, use the following procedure to set your unit to timerrecord the programme.
Press F G to select ATV PROGB, then press ENTER. Press F G to select the desired channel.
9 Press F G to select ACONFIRMB, then press ENTER. 10 Set the other recording options as required. 11 Press F G to select AOKB,
then press ENTER to access the Programme Confirmation screen.
Refer to step 8 in AG-CODE Timer ProgrammingB (A pg. 43).
PROGRAMME > CALENDAR PR. (3/3)
14/01/04 WED 22:30 - 23:00 BBC1 GARDENING [EDUCATION] FR360

1:00 28:00

12 Press D E to select AEXITB,
SELECT WITH @ THEN PRESS [ENTER] PRESS [PROGRAMME] TO EXIT
INPUT TITLE CATEGORY VPS/PDC WEEKLY/DAILY REC MODE
GARDENING EDUCATION OFF MON-FRI (FOR A WEEK) FR360
then press ENTER to complete timer programming. To programme another timer, press D E to select ACONTINUEB, then press ENTER. If APROGRAMME OVERLAPPEDB appears on the TV screen, delete or modify the programmes.
PROGRAMME EXIT ENTER OK SELECT

PROGRAMME ENTER FGDE

disc with Manual Timer Programming function, the beginning of the second one may be left off the recording. If the copy limited programme is received during timer-recording, the unit enters Record Pause mode. Recording starts again if it is switched to a recordable broadcast during the time you programmed. Satellite Receiver Users To timer-record a satellite broadcast using Manual Timer Programming: A Perform AManual Timer ProgrammingB (A pg. 45). In step 8, set ATV PROGB to AL-2B. B Set the satellite receiver to the appropriate channel before the selected programme begins. C Leave the satellite receivers power on.
Load a recordable disc if recording to DVD. Press PROGRAMME to access the programme top screen. Press FGD E to select ACALENDAR PR.B, then press ENTER. PROGRAMMESB appears on the TV screen, you need to cancel some of the reserved programmes. (A pg. 46)
Press FGD E to select the desired date, then press ENTER. Press F G to select ARECORD TOB, then press ENTER. Press F G to select the desired recording deck, then press ENTER.
Relief Recording When a programme that is set for the DVD deck cannot be recorded properly, the programme is recorded to the HDD deck instead in XP mode. If the remaining capacity of the hard disc is not sufficient, the programme is recorded to the DVD deck until the remaining capacity of the DVD disc lasts. If AJUSTB is selected for the recording mode, the current recording mode for the DVD deck is applied.

Scan For Title From Library
Press NAVIGATION. The Library Database Navigation screen appears.
Press FGD E to select the appropriate sort button to sort the information, then press ENTER. ADATEB: Sort by date ADISC No.B: A Sort by disc number ACATEGORYB: Sort by category ANAMEB: Sort by name ADATEB and ADISC No.B are available for the DVD deck only.
DVD NAVIGATION ORIGINAL PLAY LIST SELECT WITH @ THEN PRESS [ENTER] PRESS [NAVIGATION] TO EXIT DVD LIBRARY DATE DISC No. NAME NAVIGATION EXIT ENTER CATEGORY SELECT
Press FGD E to select the desired title, then press ENTER.
Playback begins automatically after the selected title is located.
NOTE: If a disc registered in the library is recorded or modified on DVD units from other manufacturers, it may become impossible to operate properly.

Register Disc

When a disc that is not registered in the library is loaded, a message appears confirming if the disc should be registered. If registering, perform the following procedure.
Press D E to select AREGISTERB, then press ENTER to confirm the registration. Press NAVIGATION to return to the normal screen.
NOTES: It is not possible to register discs formatted on devices other than JVCs DVD recorders. It is not possible to register discs recorded on devices other than JVCs DVD recorders. It is not possible to register discs when ASAVE AS LIBRARYB is set to AOFFB. (A pg. 68)
Page 53Monday, 14 March 2005 10:42
DVM70AG_00.book Page 54 Monday, March 14, 2005 10:42 AM
Playback With MP3/WMA/JPEG Navigation
This unit can play back discs that MP3/WMA sound files and JPEG image files taken with digital still cameras or other devices are recorded. The MP3/WMA/JPEG Navigation enables you to search and select the desired files recorded on CD-R/RW or CD-ROM discs very easily.
Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. Press DVD to select the DVD deck.
Locating The Desired Group And Tracks
Load a disc. Press NAVIGATION. Press FGD E to select AORIGINALB, then press ENTER.
Press F G to select the desired group, then press ENTER. A list of files in the selected group appears.
GROUP : 001/100 ITS SHOWTIME ! ! /Bz

TRACK : 001/100

ROOT CLASSIC CLUB DANCE EUROPE FOREIGN GROUP FOREIGN ROCK
001. ITS SHOWTIME ! ! /Bz 002. ONLY FLOWER IN THE WORLD/SMAP 003. SEXY GUY/GOMAKI 004. HEY?/AYAYA 005. DOOR TO TOMORROW/I WISH 006. REASON/ASAMI 007. DIE ANOTHER DAY/JAMES BOND
Press F G to select the desired item, then press ENTER. The unit starts playback from the selected item. The unit stops when all items in the selected group are played back.
If you press SELECT(I) instead of ENTER in step 4, the unit
starts playback from the first file of the group.
JPEG files are played back as a slide show at the set intervals.

In Video mode, if the selected play list includes the scenes
Recording may not be performed in the highest speed depending
on the characteristics of the disc used.
Load a recordable disc. Press DUBBING to access the Dubbing Menu screen. Press FGD E to select AHDDNDVDB, then press ENTER. Press FGD E to select AHIGH SPEEDB, then press ENTER.
recorded in the different transfer rate, the dubbing is performed in the highest transfer rate of the scenes in the selected play list. However, the lower transfer rate cannot be dubbed in the higher transfer rate. The recordable time of the disc is displayed on the bar meter. For details, refer to AAbout Disc Remaining DisplayB (A pg. 57) During dubbing, it is not possible to play back on HDD or DVD, or to set timer programming. It is not possible to discontinue dubbing once it has been started.

Page 55

DVM70AG_00.book Page 56 Monday, March 14, 2005 10:42 AM
56 EN EDITING Dubbing From HDD To DV
It is possible to perform dubbing from the HDD deck to the DV deck.

Dubbing From DVD To DV

It is possible to perform dubbing from the DVD deck to the DV deck.
Load a Mini DV cassette with the erase protection switch set to ARECB. Press DUBBING to access the Dubbing Menu screen. Press FGD E to select AHDDNDVB, then press ENTER.
Load the disc you want to dub onto the DVD deck, and a Mini DV cassette with the erase protection switch set to ARECB to the DV deck. Press DUBBING to access the Dubbing Menu screen. Press FGD E to select ADVDNDVB, then press ENTER.
Press FGD E to select indexes (small pictures) of desired original recordings and/or play lists, then press MARK. After selecting all indexes you want to dub, press ENTER. You can select up to 8 original recordings and/or play lists. Press F G to select ASELECT REC. MODEB, then press ENTER. Press F G to select the desired option, then press ENTER. Press F G to select ASELECT SND. MODEB, then press ENTER. Press F G to select the desired option, then press ENTER. Press G to select ACONFIRMB, then press ENTER. The confirmation screen appears. Press DV so that the DV lamp lights up on the unit. Press I to locate the point from where you want to start dubbing, then press R and W simultaneously so that the DV deck enters the record pause mode.
The dubbing screen will appear.
Press FGD E to select indexes (small pictures) of desired original recordings and/or play lists, then press MARK. After selecting all indexes you want to dub, press ENTER. You can select up to 8 original recordings and/or play lists. Press F G to select ASELECT REC. MODEB, then press ENTER. Press F G to select the desired option, then press ENTER. The confirmation screen appears.

To [VIDEO/AUDIO ((MONO) L/R)] input
Press S, T and W to determine the edit-in point (the beginning of the segment to be replaced). Be sure to engage the Still mode at the edit-in point. Press INSERT to engage the insert editing mode. you are going to record.
Your unit enters the Insert Pause mode. The TV screen changes from the still picture to the input source

AUDIO/VIDEO OUT

Load the source cassette and play back the segment that is to be inserted. When you reach the start of the section of the source tape that you wish to insert, press I to start the tape in your unit. Insert editing begins at this point. Press o to stop recording on the DV deck to end insert editing.

Another recorder Player

B If the player has an S-VIDEO output connector:
NOTES: Once the Insert Editing starts, you cannot use the other deck. All necessary cables can be obtained from your dealer. Insert Editing cannot be performed on a Mini DV cassette that has had its erase protection switch set to ASAVEB. When Insert Editing is performed on a tape that has been recorded on another video recorder, the inserted portion may appear distorted. A small portion of the recording which precedes an insert edit may become erased. Insert Editing is also possible with the [L-1 IN/OUT] or [L-2 IN/ DECODER] connector on the rear panel. When using these 21pin SCART connectors, be sure to select the correct input mode (AL-1B or AL-2B) in step 4. Insert Editing is not possible using the [DV IN/OUT] connector. Insert Editing is not possible on a blank portion of the tape.

Page 64

DVM70AG_00.book Page 65 Monday, March 14, 2005 10:42 AM

REMOTE CONTROL

Remote Control Functions
Remote Control 1/2/3/4 Code Switching
The remote control is capable of controlling four JVC video units independently. Each of the units can respond to one of four codes (1, 2, 3 or 4). The remote control is preset to send 3 code signals because your unit is initially set to respond to 3 code signals. You can easily modify your unit to respond to 1, 2 or 4 code signals.

TV AV /VIDEO TV d 09

A TV 8 +/ PR +/

CABLE/SAT TV

TV Multi-Brand Remote Control
Your remote control can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturers TVs can also be controlled.
Turn off the TV using its remote control. Slide the TV/CABLE/SAT/DVD switch to TV.
IMPORTANT: Although the provided remote control unit is compatible with JVC televisions, as well as many other models, it may not work with your TV, or in some instances, may have limited function capability.

This setting also functions when HDD is active. If you watch or play back a title which contains multiple audio
languages, select APCM ONLYB in advance and choose main or sub audio with AUDIO.
8 ANALOG AUDIO OUT ^ STEREO / DOLBY SURROUND
Select the appropriate setting to accommodate the unit to the connected A/V equipment. This function takes effect when a DVD VIDEO disc is played back.

STEREO:

Select this when listening to conventional two-channel stereo audio with the units [AUDIO OUT] connectors connected to a stereo amplifier/receiver or TV set, or in case you want to record the audio from a DVD VIDEO disc to a Mini Disc, etc.
Various modes of this unit are categorized into menus nested in 2 levels shown in the following table. To change the settings of these modes, find the desired mode in the menu (for details on each menu, see pages 67 through 69), then follow the procedure below.

DOLBY SURROUND:

Select this when listening to multichannel surround audio with the units [AUDIO OUT] connectors connected to an amplifier/ receiver with a built-in surround decoder or a surround decoder.

DVD VIDEO SET UP

LANGUAGE SET (A pg. 19) AUDIO OUTPUT (A pg. 67) PARENTAL LOCK (A pg. 30) DISC PLAY SET UP (A pg. 68) HDD SET UP (A pg. 68) DVD SET UP (A pg. 68) DISC SET UP (A pg. 72, 73) DV SET UP (A pg. 68) REC/PLAY SET UP (A pg. 68) DISPLAY SET (A pg. 69) VIDEO IN/OUT (A pg. 20, 61) TUNER SET (A pg. 70) CLOCK SET (A pg. 18)
8 D. RANGE CONTROL ^ NORMAL / WIDE RANGE / TV MODE
The dynamic range (the difference between the loudest sound and the quietest one) can be compressed during playback of a programme encoded in Dolby Digital format. This function takes effect when a DVD VIDEO disc recorded in Dolby Digital format is played back at low or middle volume.

HDD/DVD/DV SET UP

NORMAL:
Normally select this setting to activate this function.

FUNCTION SET UP

WIDE RANGE:
Select this to deactivate this function when you enjoy wide dynamic range programme.

TV MODE:

Select this when you hear the sound through the TVs speaker(s). NOTES:
This function has no effect on programmes other than those
The procedure below shows how to set the desired option of the
AAUDIO RECB mode as an example. Press HDD or DVD so that the HDD or DVD lamp lights up on the unit. Press SET UP to access the Main Menu screen. Press D E to select AFUNCTION SET UPB, then press G. Press D E to select AREC/ PLAY SET UPB, then press G. Press F G to select AAUDIO RECB, then press ENTER. Press F G to select the desired option, then press ENTER. Press SET UP to complete the setting.
DVD VIDEO SET UP HDD/DVD/DV SET UP FUNCTION SET UP REC/PLAY SET UP DISPLAY SET VIDEO IN/OUT DOLBY DIGITAL NICAM OFF PAL 15 MIN SELECT WITH @ THEN PRESS [ENTER] PRESS [SET UP] TO EXIT INITIAL SET UP

Finalise A DVD-R/RW Disc

Perform steps 1 to 4 of AFormat A DVD-RAM DiscB (A pg. 72) before continuing. Press FGD E to select AFINALISEB, then press ENTER.
For DVD-R/RW (Video mode) discs, the background selection
screen will appear. Press FGD E to select the desired background from a selection of 18 backgrounds then press ENTER. Press D E to select AOKB, then press ENTER.
Upon completing finalisation, ACOMPLETEDB appears on the TV screen. Press ENTER to end. Press SET UP to return to the normal screen.
Menu screen is cleared. Once a DVD-R/RW (Video mode) disc has been finalised, the
displays for original and play list do not appear. Only display for library appears. Once a DVD-RW (VR mode) disc has been finalised, it can be played on DVD players compatible with VR mode.
Cancel The Finalisation Of A DVD-RW Disc
Load a DVD-RW disc to cancel the disc finalisation, and perform steps 1 to 4 of AFormat A DVD-RAM DiscB (A pg. 72) before continuing. Press FGD E to select ACANC. FINALIS.B, then press ENTER. Press D E to select AEXECUTEB, then press ENTER. Upon completing cancellation of finalisation, ACANCELLATION COMPLETEDB appears on the TV screen. Press ENTER to end. Press SET UP to return to the normal screen. disc was formatted is restored, making the disc recordable. (A pg. 7, 72)
When the disc finalisation is cancelled, the mode in which the
Before finalising It is possible to record on a blank space. It is possible to enter title names. (A pg. 49) It is possible to delete titles. (A pg. 50) It is impossible to overwrite recorded areas of DVD-R discs. Available recording capacity does not increase even if a recorded title is deleted from a DVD-R disc. It is impossible to record or edit DVD-R/RW discs recorded on other devices even if they have not been finalised. After finalising (For DVD-R/RW (Video mode) discs) Video and audio that have been recorded by then are recorded in conformity to the DVD Video standard, enabling you to play back the discs as DVD VIDEO discs. Although DVD-R/RW discs finalised on this unit become playable on DVD players compatible with DVD-R/RW discs, some discs still may not play, for which JVC cannot take responsibility. Marked points marked before finalising will be deleted, and titles will be divided automatically into AchaptersB approximately every 5 minutes. (A pg. 24) Depending on the DVD players and DVD-R/RW discs used, and on the conditions of recording, it may not be possible to play back the discs. In this case, play back the discs on this unit. Additional recordings become impossible.
Page 73Monday, 14 March 2005 10:42
DVM70AG_00.book Page 74 Monday, March 14, 2005 10:42 AM
Scan Mode Set (HDD & DVD Deck Only)
If you connect the unit and TV with Component Video Connection (A pg. 16), you can select the scan mode from two modes: Interlaced scan mode which is used in the conventional TV system, and Progressive scan mode which enables reproduction of higher-quality images.

NU NZ OM PA PE PF PG PH PK PL PM PN PR PT PW PY QA RE RO RU RW SA SB SC SD SE SG SH SI SJ SK SL SM SN SO SR ST SV SY
Niue New Zealand Oman Panama Peru French Polynesia Papua New Guinea Philippines Pakistan Poland Saint Pierre and Miquelon Pitcairn Puerto Rico Portugal Palau Paraguay Qatar Runion Romania Russian Federation Rwanda Saudi Arabia Solomon Islands Seychelles Sudan Sweden Singapore Saint Helena Slovenia Svalbard and Jan Mayen Slovakia Sierra Leone San Marino Senegal Somalia Suriname Sao Tome and Principe El Salvador Syrian Arab Republic
SZ TC TD TF TG TH TJ TK TM TN TO TP TR TT TV TW TZ UA UG UM US UY UZ VA VC VE VG VI VN VU WF WS YE YT YU ZA ZM ZR ZW
Swaziland Turks and Caicos Islands Chad French Southern Territories Togo Thailand Tajikistan Tokelau Turkmenistan Tunisia Tonga East Timor Turkey Trinidad and Tobago Tuvalu Taiwan Tanzania, United Republic of Ukraine Uganda United States Minor Outlying Islands United States Uruguay Uzbekistan Vatican City State (Holy See) Saint Vincent and the Grenadines Venezuela Virgin Islands (British) Virgin Islands (U.S.) Viet Nam Vanuatu Wallis and Futuna Islands Samoa Yemen Mayotte Yugoslavia South Africa Zambia Zaire Zimbabwe
MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ NA NC NE NF NG NI NL NO NP NR
Page 82Monday, 14 March 2005 10:42
Filename [DVM70AG_14IX.fm]
DVM70AG_00.book Page 83 Monday, March 14, 2005 10:42 AM

LIST OF TERMS

A-B Repeat Playback.. 27 Accidental erasure prevention. 38 Adjusting The Picture Quality.. 28 Angle Selection... 24 Audio Channel Selection.. 25 Audio Language/Sound Selection. 25 Auto Channel Set... 70
Pan&Scan... 20 Play List.. 51 Playback Control (PBC).. 25 Programme Playback.. 29 Progressive scan.. 74
Random Playback... 29 Receiving Stereo And Bilingual Programmes. 33, 35 Recordable/Playable Discs.. 5 Recording Medium And Format. 7 Recording Mode.. 31, 34 Region Number... 6 Register Disc.. 53 Relief Recording.. 45 Repeat Playback.. 26 Resume Function... 23 Resuming Playback.. 42 RetroActive Recording... 42
Cancel And Change Programmes.. 46 Check Programmes.. 46 Country/Area Code List for Parental Lock.. 81
Disc menu... 22 Disc Remaining Time..32, 35 Disc Resume... 68 Discs For Playback Only.. 6 DVD menu... 22
Elapsed Recording Time Indication..32, 35
Select The Switching Interval Of The Slide Show. 29 Selection Of The Audio Channel To Be Recorded On A Disc... 33 Setting The Progressive Mode.. 29 Simulated Surround Effect... 28 Simultaneous Recording and Playback.. 42 Skip Search.. 23, 36, 39 Slow Motion.. 23, 36, 39 Soundtrack Selection.. 39 Still Picture/Frame-By-Frame Playback.23, 36, 39 Subtitle Selection.. 25