Creating Realistic Sound Fields. 18
7 Dolby Digital and DTS Digital Surround.. Dolby Surround... DSP (Digital Signal Processor) Modes.. 19 Adjusting Stereo Sound.. 20 Adjusting Dolby Digital and DTS Digital Surround. 21 Activating Dynamic Range Compression.. 21 Adjusting Dolby Surround.. 22 Adjusting DSP Modes.. 23 Adjusting DSP Sound Parameters.. 24

Tuner Operations.. 44

Tuning in Stations... 44 Using Preset Tuning... 45 Selecting the FM Reception Mode.. 45
Setting up the DVD Preferences.. 46
Setting the Initial Languages.. 46 Introducing the DVD Preference (System).. 47 Setting the Parental (Rating) Level.. 49
Disc IntroductionDVD/VCD/CD. 25 Basic Disc Operations.. 26
Operating JVCs Components.. 50 Operating Other Manufacturers TV. 51 Maintenance.. 52 Troubleshooting... 53 Specifications.. 54
EN01-09TH-A5[J]f.pm01.11.2, 18:31

Parts Identification

Center Unit

Front Panel 7 8

See pages in the parentheses for details.

Front Panel

1 STANDBY/ON button and STANDBY lamp (10 14) 2 AUDIO/FM MODE button (28, 38, 45) 3 Multi operation buttons 4, , and Disc tray (10, 12) (open/close) button (10 13, 32, 37, 41) Pressing this button also turns on the power and changes the source to the DVD player. 6 Display window 7 Remote sensor 8 3/8 (play/pause) button (10, 12, 26, 41) Pressing this button also turns on the power and changes the source to the DVD player. 9 DSP button (11, 13, 23) p VOLUME + and buttons (10, 12, 14) q SOURCE button (14, 15, 44, 45) w Illumination lamp (10, 12, 14)

Display window 7

TUNED TITLE
LINEAR PCM L LS C LFE S RS R

PROGRAM

PBC MHz DSP kHz

Display

1 Sound signal indicators (11, 13, 18) PRO LOGIC, DOLBY DIGITAL, DTS, and LINEAR PCM 2 TITLE indicator (26) 3 Tuner mode indicators (14, 44, 45) TUNED and ST (stereo) 4 PROGRAM indicator (31, 37, 45) 5 DSP indicator (23) 6 PBC (Play Back Control) indicator (34, 35) 7 Frequency unit indicators MHz (for FM station) and kHz (for AM station) 8 Audio channel indicators Indicates audio channels currently being played back. 9 Main display

Remote Control

STANDBY/ON

AUDIO VCR CONTROL ON OFF

t y u i o
STANDBY/ON AUDIO button (10 14) VCR button (54) button (10, 12, 50, 51) TV MENU button (29, 35) TOP MENU button (29) AUDIO/FM MODE button (28, 38, 45) SUBTITLE button (28) DISPLAY button (27, 34, 41) RETURN button (35, 47, 48) 4, 7, 3/8, and buttons TUNER PRESET UP and DOWN buttons (45) FF (Fast-forward) and REW (Rewind) buttons Pressing 3/8 also turns on the power. VCR CHANNEL + and buttons (50) TUNING + and buttons (14, 44) F. (Forward) SEARCH and 1 B. (Back) SEARCH buttons Menu operation buttons 3, 2, 5, and buttons ENTER button VOLUME + and buttons (10, 12, 14) Source selecting buttons (14, 15, 44) DVD, FM/AM, AUX Pressing one of these buttons also turns on the power. VCR CONTROL ON and OFF buttons (50)

IMPORTANT:

If you press VCR CONTROL ON, this remote control will work ONLY for the JVCs VCR. When you want to operate the system again, press VCR CONTROL OFF.

y u i o ;

TV CHANNEL + and buttons (50, 51) TV VOLUME + and buttons (50, 51) TV/VIDEO button (10, 12, 50, 51) STEP button (33, 39) MUTING button (10, 12) To open the cover of the remote control, push here, then slide downward.
RE TU RN TV VO TU NE R PR ES VC R TU CHAN NING NE L ST EP ET LUME TV /VID EO EN TE R DV D FM /AM

VO LU ME AU X MU TE

SLOW AN GL E RE PE AT A CLEA R GO NT RE A <> PE AT B A TO RE MA IN
SE T UP DIG ES T TEST DSP MO DE TONE ON E PRO LOGIC

SPK MO DE SO UN D ED IT

ZO SC OM /PAL /PA

PROG RAM

EFFE CT SLEE P

Inside of the Cover

DVD FM/AM AUX MUTING
THEA -STH TER A5J SYST EM
Inside of the Cover 1 Number buttons (29, 35, 43, 50, 51) 2 SLOW button (33, 39) 3 ZOOM button (33, 39) 4 ANGLE button (28) 5 REPEAT button (30, 36, 43) 6 AB REPEAT button (31, 36) 7 CLEAR button (29, 35, 38) 8 SEARCH button (29, 35, 43) 9 SOUND button (20 24) p SETTING button (16, 17) q PRO LOGIC button (15, 17, 22) w SETUP button (47 49) e TEST button (19) r D.R.C button (21) t DSP MODE button (11, 13, 23, 24) y EFFECT button (24) u PROGRAM button (31, 32, 37, 45) i SLEEP button (15) o REMAIN button (29, 34)

SETTING

PRO LOGIC

SETUP TEST

DSP MODE

REPEAT

A-B REPEAT PROGRAM

EFFECT

SEARCH

REMAIN

p q w e r t y u i o

Getting Started

Before Installation

General Precautions

DO NOT insert any metal object into the center unit. DO NOT disassemble the center unit or remove screws, covers, or cabinet. DO NOT expose the center unit to rain or moisture.
Putting Batteries in the Remote Control
Before using the remote control, put two supplied batteries first. When using the remote control, aim the remote control directly at the remote sensor on the center unit.
1. On the back of the remote control, remove the battery cover.

Locations

Install the center unit in a location that is level and protected from moisture. The temperature around the center unit must be between 5C and 35C (41F and 95F). Make sure there is good ventilation around the center unit. Poor ventilation could cause overheating and damage the center unit.

Handling the center unit

DO NOT touch the power cord with wet hands. DO NOT pull on the power cord to unplug the cord. When unplugging the cord, always grasp the plug so as not to damage the cord. Keep the power cord away from the connecting cords and the antenna. The power cord may cause noise or screen interference. It is recommended to use a coaxial cable for antenna connection, since it is well-shielded against interference. When a power failure occurs, or when you unplug the power cord, the preset settings such as preset FM/AM channels and sound adjustments may be erased in a few days.

6 Stop Playback

TUNER PRESET Press 7 twice. Playback stops completely and DVD appears on the display. (The DVD player goes on working for 3 minutes after playback stops.) This system can memorize the end point even when you press 7 once. When you start playback again by pressing 3/8, playback begins from where it has been stoppedResume play.
Digital Multichannel SurroundDolby Digital and DTS Digital Surround
Dolby Digital or DTS Digital Surround takes effect only when you enjoy a disc encoded with its signalsthe DOLBY DIGITAL or DTS indicator lights up on the display.
To remove the loaded disc
Press 0. OPEN appears on the display and the disc tray comes out. To close the disc tray, press 0 again. If you do not press the button, the disc tray closes automatically after 35 seconds.
Sound signal indicators on the display
To activate Dolby Digital or DTS Digital Surround
When a disc encoded with the Dolby Digital or DTS Digital Surround is loaded, the system detects it and starts playing the disc automatically with Multichannel Surround activated. For in-depth information about surround modes, see Creating Realistic Sound Fields on pages 18 and 21.
To turn off the power (into standby)
Press STANDBY/ON AUDIO (or STANDBY/ON STANDBY/ON on the front panel). AUDIO The illumination lamp goes off and the STANDBY lamp lights up. AUDIO (or If you press STANDBY/ON on the front panel) while the disc tray is kept STANDBY/ON open, the disc tray closes automatically, then the system is turned off. A small amount of power is consumed even in standby mode. To turn the power off completely, unplug the AC power cord.
DSP modesHALL, THEATER, PAVILION, DANCE CLUB, LIVE CLUB
DSP modes take effect only when you enjoy a disc recorded using Linear PCMthe LINEAR PCM indicator lights up on the display. Sound signal indicators on the display

To activate DSP modes

Press DSP MODE (or DSP on the front panel). The DSP indicator lights up and the current DSP mode appears on the display for a while. Each time you press the button, DSP mode changes as follows:
HALL Normal indication (canceled)

THEATER LIVE CLUB

PAVILION DANCE CLUB
For in-depth information about DSP modes, see Creating Realistic Sound Fields on pages 19, 23, and 24.
Note: Before activating the realistic sound field, adjust the speaker setting to bring out the best performance from this system. For in-depth information about adjusting the speaker setting, see Speaker Settings on pages 16 and 17.

* 00 MS is the initial setting for the center speaker. The initial setting for the rear speakers is 00 MS for Dolby Digital and DTS Digital Surround, 15 MS for Dolby Pro Logic. If you have already changed the setting, a different value will be shown.
Creating Realistic Sound Fields
You can use the following surround to reproduce a realistic sound field. Digital Multichannel SurroundDolby Digital and DTS Digital Surround Dolby Surround DSP (Digital Signal Processor) modes
Dolby Pro Logic and Dolby 3 Stereo
Dolby Surround encoding format records the left front channel, right front channel, center channel, and rear channel signals (total 4 channels) into 2 channels. The Dolby Pro Logic decoder built in this system decodes these 2 channel signals into original 4 channel signalsmatrix-based multichannel reproduction, and allows you to enjoy a realistic stereo sound in your listening room. When one of Dolby Surround is selected, the PRO LOGIC indicator lights up on the display.
I Dolby Digital and DTS Digital Surround
To enjoy surround effectively, all the speakers need to be connected and activated.

Dolby Digital*

Used to reproduce multichannel sound tracks of the software ). encoded with Dolby Digital ( Dolby Digital encoding method (so-called discrete 5.1 channel digital audio format) records and digitally compresses the left front channel, right front channel, center channel, left rear channel, right rear channel, and LFE channel signals (total 6 channels, but LFE channel is counted as 0.1 channel. Therefore, called 5.1 channel). Since each channel is completely independent from the other channel signals to avoid interference, you can obtain much better sound quality with much stereo and surround effects. In addition, Dolby Digital enables stereo rear sounds, and sets the cutoff frequency of the rear treble at 20 kHz, compared to 7 kHz for Dolby Pro Logic. These facts enhance the sound movement and being-there feelings much more than Dolby Pro Logic. When the system detects Dolby Digital signals, the DOLBY DIGITAL indicator lights up on the display.
Indications on the display for each surround

Dolby Digital

DTS Digital Surround

Dolby Pro Logic

DTS Digital Surround**
Used to reproduce multichannel sound tracks of the software ). encoded with DTS Digital Surround ( DTS Digital Surround is another discrete 5.1 channel digital audio format available on CD, LD, and DVD software. Compared to Dolby Digital, audio compression rate is relatively low. This fact allows DTS Digital Surround format to add breadth and depth to the reproduced sounds. As a result, DTS Digital Surround features natural, solid and clear sound. When the system detects DTS Digital Surround signals, the DTS indicator lights up on the display.

Dolby 3 Stereo

I Dolby Surround*
Used to reproduce sound tracks of the VCR tapes encoded with DOLBY SURROUND ). Dolby Surround ( This is only used for the sound sources coming through the AUX IN jacks.
* When you select FM/AM or AUX as the source, the Linear PCM indicator ( ) does not light up. According to the speaker settings, some speaker indicators do not light up. In this case, set the speaker setting appropriately.
* Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. 19921997 Dolby Laboratories, Inc. All rights reserved.
** Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide patents issued and pending. DTS and DTS Digital Surround are trademarks of Digital Theater Systems, Inc. 1996 Digital Theater Systems, Inc. All rights reserved.
EN18-24TH-A5[J]f.pm01.11.2, 18:31
I DSP (Digital Signal Processor) Modes
DSP modes have been designed to create important acoustic surround elements. The sound heard in a hall, a theater, a pavilion, a dance club, or a live club consists of direct sound and indirect soundearly reflections and reflections from behind. Direct sounds reach the listener directly without any reflection. On the other hand, indirect sounds are delayed by the distances of the ceiling and walls. These indirect sounds are important elements of the acoustic surround effects. The following DSP modes are provided with this unit. HALL THEATER PAVILION : Gives clear vocal and the feeling of a concert hall. : Gives the feeling of a theater. : Gives the spacious feeling of a pavilion with a high ceiling. : Gives the feeling of a live music club with a low ceiling.

00 F (Front) 00 : To adjust the output balance for the front speakers. 00 R (Rear) 00 : To adjust the output balance for the rear speakers. When selecting 3 STEREO, you cannot adjust the output balance for the rear speakers. 00 F 00 and 00 R 00 are the initial settings (the output balances are at the center position). If you have already changed the setting, another value will appear.
Press AUX to select the external component as the source.
Start playing a source encoded with Dolby Surround.
To adjust the output level for the center speaker, the rear speakers, and the subwoofer 1) Press SOUND repeatedly to select the SOUND CEN, REAR, or SW.
Select and play any source except Dolby Digital or DTS Digital Surround. Press DSP MODE (or DSP on the front panel) repeatedly to select the desired DSP mode.
The DSP indicator lights up on the display while the DSP modes are activated. Each time you press the button, DSP mode changes as follows:
SW (Subwoofer) : To adjust the output level for subwoofer (from 06 dB to +06 dB). When selecting 3 STEREO, you cannot adjust the output levels for the rear speakers and subwoofer. CEN 06dB, REAR 06dB, and SW 06dB are the initial settings. If you have already changed the settings, another value will appear.
Now, you are ready to start the adjustment. To adjust the output balance for the front speakers and the rear speakers, go to the next step. To adjust the output level for the rear speakers, go to step 4 on the next page. To adjust the overall level of DSP effect, go to step 5 on the next page.
00 F 00 Normal indication (canceled)

00 R 00 REVERB LIVE

REAR ROOM

Adjusting DSP Modes

You can adjust the following settings while activating DSP modes. It is recommended that you make adjustments from your actual listening point while listening to reproduced sounds. Output balance for the front speakers Output balance for the rear speakers Output level for the rear speakers Output level for the subwoofer Overall level of DSP effect DSP modes cannot be used with Dolby Surround. Once one of DSP modes is activated, Dolby Surround in use will be canceled. When you play back a DVD encoded with Dolby Digital or DTS Digital Surround, DSP MODE button (or DSP button on the center unit) does not work. Before you start, remember. Make sure that you have set the speaker information correctly (see page 16). You cannot adjust the speaker output balance and levels when you have set the speaker settings to NONE. There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.
TO BE CONTINUED ON THE NEXT PAGE
Adjusting DSP Sound Parameters
You can fine-adjust DSP modes more minutely by changing three parametersroom, liveness, and reverberation. Before you start, remember. There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

Press DSP MODE (or DSP on the front panel) repeatedly to select the desired DSP mode. Press SOUND repeatedly to select the desired DSP sound parameter.

DSP MODE EFFECT

To adjust the output level for the rear speakers 1) Press SOUND repeatedly until REAR SOUND appears on the display.
ROOM : To adjust the resonance based on the room size. The larger this value is, the more effective the resonance is (from 04 to 16 by 2 steps). LIVE (Liveness) : To adjust the liveness. The larger this value is, the more liveness is obtained (from 04 to 16 by 2 steps). REVERB (Reverberation) : To adjust the reverberation time of the sound (from 0.0 msec to 1.6 msec by 0.2 msec steps). The following diagram shows the DEFAULT (initial) settings of the DSP sound parameters for each DSP mode. DSP MODE HALL THEATER PAVILION DANCE CLUB LIVE CLUB ROOM 08 LIVE 16 REVERB 0.4 1.0 0.2 1.6 1.4
REAR : To adjust the output level for rear speakers (from 06 dB to +06 dB). REAR 06dB is the initial setting. If you have already changed the setting, another value will appear.
To adjust the overall level of DSP effect
Press EFFECT repeatedly to adjust the overall level. EFFECT (with the current setting) or DEFAULT appears on the display. Each time you press the button, the effect level changes as follows:
Press 3 or 2 to adjust the DSP sound parameter.
3 : Increases the value. 2 : Decreases the value.
Repeat 2 and 3 for setting the other DSP sound parameters.

EFFECT 1 DEFAULT

EFFECT 2

EFFECT 3

As the number increases, DSP effect becomes stronger. DEFAULT is the initial setting. For in-depth information about DEFAULT (initial) setting, see the table to the right.
Pressing EFFECT to adjust overall level of DSP effect will change your fine-adjustments to the fixed level.
Disc IntroductionDVD/VCD/CD
This system has been designed to play back the following discs: DVD, Video CD, Audio CD, CD-R, and CD-RW. This system can also play back MP3 files recorded on CD-Rs and CD-RWs. For in-depth information about what MP3 is, see MP3 Introduction on page 40. Disc structureDVD, Video CD (VCD) and Audio CD (CD) A DVD disc consists of Titles, and each title may be divided into some Chapters. (See Example 1.) For example, if a DVD disc contains some movies, each movie may have its own title number, and it may be further divided into some chapters. On the other hand, a VCD or CD consists of Tracks. (See Example 2.) In general, each song has its own track number. (On some discs, each track may also be divided by Indexes.) When playing back a VCD with Playback Control (PBC) function, you can select what to view using the menu shown on the TV screen. (While operating a Video CD using the menu, some of the functions such as Repeat and Track Search may not work.)

Playback information on the display
Title No. Chapter No. Elapsed playing time

To remove the disc

Press 0 on the front panel. The disc tray comes out. To close the disc tray, press 0 again. If you do not press the button, the disc tray closes automatically 35 seconds after.

VCD/CD

Track No. Elapsed playing time

DVD Playback

Some DVDs contain several audio languages, subtitles, and multiangle views. When you find the following marks on the DVD or its package, you can select these elements recorded on the DVD.
Subtitles are recorded on the disc. The number inside the mark indicates the total number of the recorded subtitles. Several audio languages are recorded on the disc. The number inside the mark indicates the total number of the recorded audio languages. Multi-angle views are recorded on the disc. The number inside the mark indicates the total number of the recorded multi-angle views.

On-screen bar goes off.

1 : Disc type

DVD VCD CD MP3

If you cannot find out whether your disc contains these features listed above, you can check it by showing the on-screen bar. For basic disc operations such as inserting a disc, starting playback, and moving to another chapters, see Basic DVD Operations on pages 10, 11, and Basic Disc Operations on page 26.
2 : Current title and total number of the titles on the disc
Ex.: 1st title is playing out of 3 titles recorded.
3 : Current chapter and total number of the chapters recorded on the disc
Ex.: 1st chapter is playing out of 5 chapters recorded.
4 : Elapsed playing time or remaining time
You can change the play time indication by pressing REMAIN. See page 29 for more details.
Showing the On-Screen Bar
You can show the following information on the TV screen while a disc is loaded. From the remote control ONLY: Press DISPLAY. Each time you press the button, the following on-screen bar appears in sequence.
5 : Subtitle language indication
Ex.: When no subtitle is recorded on the disc. See page 28 for more details.
6 : Audio language indication
Ex.: Original sound (default) is selected out of 3 audio languages recorded. See page 28 for more details.

DISPLAY

7 : Signal format indicator
Signal format typeLinear PCM (stereo), Dolby Digital, and DTS Digital Surroundwill be indicated. Ex.: When the disc is encoded with Dolby Digital.
8 : Repeat mode indicator
Ex.: When repeat mode is turned off. See page 30 for more details.
9 : Multi-angle view indicator
Ex.: When only a single angle-view is recorded on the disc. See page 28 for more details.
Selecting the Audio Languages

TOP MENU AUDIO/ FM MODE

MENU SUBTITLE
While playing back a DVD containing audio languages (sound track), you can select the language (sound track) to listen to. You can set your favorite audio language as the initial audio language. (See page 46.) Press AUDIO/FM MODE. The on-screen bar appears on the TV screen for a while. Each time you press the button, the audio language changes as follows:

ENG 1/3 ENG 1/3

AUDIO/ FM MODE

3/2/5/ ENTER

ENG 1/3

FRE 2/3 SPA 3/3

Number buttons
Ex.: When the disc has 3 selectionsEnglish, French, and Spanish

ANGLE CLEAR SEARCH

Selecting the Multi-Angle Views
REMAIN While playing back a DVD containing multi-angle views, you can view the same scene at different angles. When you play back the DVD containing multi-angle views, appears on the TV screen. From the remote control ONLY:

Selecting the Subtitles

While playing back a DVD containing subtitles in different languages, you can select the subtitle to be displayed on the TV screen. You can set your favorite subtitle language as the initial language shown on the screen. (See page 46.) From the remote control ONLY: Press SUBTITLE. The on-screen bar appears on the TV screen for a while. Each time you press the button, the subtitle language changes as follows:

OFF /3 DEF 1/3 1/1

SUBTITLE
Press ANGLE. Each time you press the button, the view angle changes.
Ex.: When the disc has 3 multi-angle views

OFF /3 SPA 3/3

ENG 1/3 FRE 2/3
When the on-screen bar is shown on the TV screen, Repeat mode indication also changes as follows:

1/3 3/3

Ex.: When the disc has 3 selectionsEnglish, French, Spanish and no subtitle (OFF)
Checking the Remaining Time
While playing back a DVD, you can check the remaining time to be played back. From the remote control ONLY: Press REMAIN. The on-screen bar and the current play time indication appear on the TV screen for a while. Each time you press the button, the following indication appears on the screen:

To reverse the chapterVariable Speed Reverse Search
From the remote control ONLY:
Press 1 during playback or pause. Each time you press the button, the search speed changes as follows:
x2 PLAY (Back play) x4 x8

B.SEARCH

TUNER PRESET DOWN REW UP FF VCR CHANNEL TUNING B.SEARCH F.SEARCH

To resume normal play

Press 3/8.

Repeating Playback

7 Repeat Play
REPEAT Press REPEAT repeatedly. The indication corresponding to the selected mode appears on your TV. Each time you press the button, Repeat mode changes as follows:

PROGRAM A-B REPEAT

REPEAT:CHAPTER

REPEAT:TITLE

REPEAT OFF
REPEAT:CHAPTER : Current chapter will be repeated. REPEAT:TITLE* : Current title will be repeated. REPEAT OFF : Repeat play is canceled. (Normal play is resumed.)
Searching for a Particular Point
You can search for a particular portion while playing a disc Variable Speed Forward/Reverse Search. No sound comes out during Variable Speed Forward/Reverse Search.
* Cannot be selected during program play.
Note: When the on-screen bar is shown on the TV screen, repeat mode indication also changes as follows:
To fast-forward the chapterVariable Speed Forward Search
From the remote control ONLY: Press during playback or pause. Each time you press the button, the search speed changes as follows:

F.SEARCH

7 AB Repeat

x2 PLAY (Normal play)

While playing, you can also select a portion you want to repeat. AB repeat is not performed between different titles. An interval of more than 5 seconds is required between point A and point B. Example:

REPEAT A

REPEAT AB
Press AB REPEAT to select the start point.
REPEAT A appears on the display.

A-B REPEAT

Press ENTER.
PROGRAM MENU TITLE CHAPT 1 2 3 4 5 CHOOSE : 15 PREVIOUS 10

SELECT: ENTER

TITLE CHAPT NEXT
Press AB REPEAT again to select the end point.
REPEAT A changes to REPEAT AB, then AB repeat begins. The unit automatically locates point A and starts repeated playback between points A and B.

PLAY: 3

FINISH: PROGRAM
Title numbers you can select in the next step

To cancel AB Repeat

Press AB REPEAT again. REPEAT AB goes off from the display.
Note: When the on-screen bar is shown on the TV screen, Repeat mode indication also changes as follows:
Press 3 or 2 to select a title number, then ENTER.
3 : Increase the number. 2 : Decrease the number. You can also select a title number using the number buttons.
PROGRAM MENU T I T L E CHAPT 2 3 4 5 CHOOSE : 19 PREVIOUS 10

T I T L E CHAPT NEXT

On some DVDs, AB Repeat may not be used even within the same title. This is due to their disc structures, and not a malfunction of the unit.
Chapter numbers you can select in the next step
Programming the Playing Order of the ChaptersProgram Play
You can arrange the chapter playback order before you start playing. You can program up to 20 steps. Before making a program, make sure that the TV is turned on and the correct input is selected on the TV. From the remote control ONLY:
Press 3 or 2 to select a chapter number, then ENTER.
3 : Increase the number. 2 : Decrease the number. You can also select a chapter number using the number buttons.
PROGRAM MENU TITLE CHAPT 8 10

Load a disc.

If the current playing source is not the DVD player, press 3/8, then 7 before going to the next step.

PREVIOUS

Press PROGRAM.
The PROGRAM MENU screen appears on the TV screen. PROGRAM appears on the display and the PROGRAM indicator also lights up.
PROGRAM MENU T I T L E CHAPT 5 10
To select all chapters in the selected title as one program step, simply press ENTER without selecting any number. ALL appears on the chapter number position.
Repeat steps 3 to 5 to program other chapters you want.
After 10 steps are programed, NEXT is selected (highlighted). If you want to program more steps, press ENTER.
The chapters are played in the order you have programed.
After all the chapters you programed are played back, the PROGRAM MENU screen appears on the TV screen again. TO BE CONTINUED ON THE NEXT PAGE
To erase the stored program
Press 0 to eject the disc. If you turn off the system or change the source, the program is also erased.
To check the program contents
STEP 3/8 You can check the program contents by pressing PROGRAM. The PROGRAM MENU screen appears on the TV screen. If you press the button during playback, the program play will stop.

To modify the program

You can modify the program while the PROGRAM MENU screen is shown on the TV screen.
To erase a step: Press (or 5) to select (highlight) an unwanted program step, then press CLEAR.
To modify a step: Press (or 5) to select (highlight) a program step you want to modify, then perform steps 3 to 5 on page 31. (Before entering a new number, press CLEAR repeatedly until appears on the number entry position.) To add a step: Press (or 5) to select (highlight) an empty program step, then perform steps 3 to 5 on page 31. ZOOM PROGRAM To move program step 11 to program step 10, press 5 when program step 11 is selected (highlighted) so that PREVIOUS is selected (highlighted). Then, press ENTER. To move program step 10 to program step 11, press when program step 10 is selected (highlighted) so that NEXT is selected (highlighted). Then, press ENTER.

Press during playback or pause. Each time you press the button, the search speed changes as follows:
x2 PLAY (Normal play) x4 x8
To reverse the tracksVariable Speed Reverse Search
Note: While operating a VCD using menu, some of the functions such as repeat play may not work.
You can move to a particular portion (scene) on the track directly. PBC function is canceled when you use this function. From the remote control ONLY:
Each time you press the button, the following indication appears on the TV screen. TIME : TRACK TIME :
Note: When the on-screen bar is shown on the screen, Repeat mode indication also changes as follows:

VCR CONTROL OFF ON

REPEAT:ONE

REPEAT:DISC

STEP TV/VIDEO
While playing, you can also select a portion you want to repeat. An interval of more than 5 seconds is required between point A and point B. Example:

23 ENTER

PROGRAM AB REPEAT
Repeat play cannot be used in the following cases: When you play back a VCD using the PBC function When you enjoy program play
REPEAT A changes to REPEAT AB, then AB Repeat begins. The unit automatically locates point A and starts repeated playback between points A and B.
From the remote control ONLY: Press REPEAT repeatedly. The indication corresponding to the selected mode appears on your TV. Each time you press the button, repeat mode changes as follows:
When the on-screen bar is shown on the TV screen, repeat mode indication also changes as follows:
REPEAT:ONE REPEAT:DISC REPEAT OFF : Current track will be repeated. : All the tracks will be repeated. : Repeat play is canceled. (Normal play is resumed.)
Programming the Playing Order of the TracksProgram Play
You can arrange the track playback order before you start playing. You can program up to 20 steps. Before making a program, make sure that the TV is turned on and the correct input is selected on the TV.
Repeat steps 3 and 4 to program other tracks you want.
The tracks are played in the order you have programed.
If the current playing source is not the DVD player, press 3/8 to select the disc you want to play, then 7 before going to the next step.
After all the tracks you programed are played back, the PROGRAM MENU screen appears on the TV screen again.

To stop during play

Press 7 or PROGRAM on the remote control. The PROGRAM MENU screen appears on the TV screen. If you press 3/8 while this screen is shown, the system starts program play.

LANGUAGES

SYSTEM
OSD LANGUAGE AUDIO SUBTITLE MENU LANGUAGE
ENGLISH ENGLISH ENGLISH ENGLISH

| \ : Move

Setup : Exit

OSD LANGUAGE

: Select the indication language shown on the TV screen while operating the system. (ex. PLAY, STOP, PAUSE, etc.) : Select the language you listen to while watching a DVD. : Select the subtitle language you read while watching a DVD.

AUDIO SETUP SUBTITLE

MENU LANGUAGE : Select the menu language recorded on a DVD which you use while operating the DVDs own menu.
Languages you can select on this menu
On the Setup menu, you can do the two main important settings language selection (LANGUAGES) menu and system setting (SYSTEM) menu. Setup menu can only be displayed while a disc is not playing. (The DVD player must be selected as the source.) You can only use the remote control for Setup menu operations. You can select the following languages separately for each listed item on the menu. For OSD LANGUAGE: English, Chinese, Spanish, French, German, Japanese, and Korean. For AUDIO, SUBTITLE, and MENU LANGUAGE: English, Chinese, French, German, Japanese, Russian, Spanish, Portuguese, Korean and Original*. * Available only for AUDIO and SUBTITLE. When you want to operate the disc or enjoy its playback in the originally recorded (default) language, select ORIGINAL.
Note: The original language will be selected as the initial language regardless of your setting in the following cases: If the language you have selected is not recorded on the disc. If the disc is programed to be played back in the original language.
EN46-49TH-A5[J]f.pm01.11.2, 18:31
I Basic language selecting procedure
Ex. : To select the desired language as the initial language for AUDIO. From the remote control ONLY:
Introducing the DVD Preference (System)
You can set the DVD preference to match it to your usage and operating circumstances.

Press SETUP.

Language selection menu of the Setup menu appears on the TV screen.

LANGUAGES SYSTEM

On the system setting menu, you can set the following:

SYSTEM 4 : 3 LB

TV SCREEN RATING LEVEL DIGITAL OUTPUT

OFF BITSTREAM

Not used for this system
Press (or 5) to select (highlight) one of the language items.
Pop-up window appears (where the language names are listed).
TV SCREEN: Select the TV screen size for playing back a DVD recorded with 16:9 wide screen video signal. 4:3 LB : Select 4:3 LB (Letter Box) when the aspect ratio of your TV is 4:3. While viewing a wide screen picture, the black bars appear on the top and the bottom of the screen. 4:3 PS : Select 4:3 PS (Pan-Scan) when the aspect ratio of your TV is 4:3. While viewing a wide screen picture, the black bars do not appear, however, the left and right edge sides of the pictures will not be shown on the screen. 16:9 : Select 16:9 when the aspect ratio of the TV is 16:9. (Set the screen size to full on your TV.)