JVC TH-S3 Manual
JVC TH-S3, size: 2.1 MB
JVC TH-S3 Instruction Manual
Here you can find all about JVC TH-S3 like manual and other informations. For example: price.
JVC TH-S3 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a JVC TH-S3 please write about it to help other people. [ Report abuse or wrong photo | Share your JVC TH-S3 photo ]
my old setup
User reviews and opinions
|Raakasa||12:58am on Wednesday, September 8th, 2010|
|I have had this unit for 4 months now and ove... 1-Good entry level unit. 2-DTS and high quality 16:9 compression. 3-Good features 1-Noisy fan.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
THS3-EN.book Page i Tuesday, February 24, 2004 8:35 PM
DVD DIGITAL CINEMA SYSTEM
Consists of XV-THS3, SP-WS3, and SP-THS3F
THS3[B]-02warning.fm Page 1 Wednesday, March 3, 2004 1:00 PM
Warnings, Cautions and Others
IMPORTANT for the U.K.
DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. If this product is not supplied fitted with a mains plug then follow the instructions given below:
To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture.
DO NOT make any connection to the terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow. The wires in the mains lead on this product are coloured in accordance with the following code: Blue: Neutral Brown: Live As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.
Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). The button in any position does not disconnect the mains line. When the system is on standby, the STANDBY lamp lights red. When the system is turned on, the STANDBY lamp goes off. The power can be remote controlled.
Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) Do not place any naked flame sources, such as lighted candles, on the apparatus. When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly. Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT.
THS3[B]-02warning.fm Page 2 Wednesday, March 3, 2004 1:00 PM
Caution: Proper Ventilation To avoid risk of electric shock and fire and to protect from damage, place the apparatus on a level surface. The minimal clearances are shown below: Side view Front view
Wall or obstructions Wall or obstructions
8 cm 3 cm
Front No obstructions 15 cm
SOME DOS AND DONTS ON THE SAFE USE OF EQUIPMENT
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. Do read the operating instructions before you attempt to use the equipment. Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturers instructions. Switch off and withdraw the mains plug when making or changing connections. Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. Do be careful with glass panels or doors on equipment. DONT continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way switch off, withdraw the mains plug and consult your dealer. DONT remove any fixed cover as this may expose dangerous voltages. DONT leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure that your family know how to do this. Special arrangements may need to be made for infirm or handicapped people. DONT use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving. DONT listen to headphones at high volume as such use can permanently damage your hearing. DONT obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment. DONT use makeshift stands and NEVER fix legs with wood screws to ensure complete safety always fit the manufacturers approved stand or legs with the fixings provided according to the instructions. DONT allow electrical equipment to be exposed to rain or moisture. ABOVE ALL NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case this could result in a fatal electrical shock.; NEVER guess or take chances with electrical equipment of any kind it is better to be safe than sorry! E43486-340B
7 Safety precautions
Avoid moisture, water and dust Do not place the system in moist or dusty places. Avoid high temperatures Do not expose the system to direct sunlight and do not place it near a heating device. When you are away When away on travel or for other reasons for an extended period of time, disconnect the power cord plug from the wall outlet. Do not block the vents Blocking the vents may damage the system. Care of the cabinet When cleaning the system, use a soft cloth and follow the relevant instructions on the use of chemically-coated cloths. Do not use benzene, thinner or other organic solvents including disinfectants. These may cause deformation or discoloring. If water gets inside the system Turn the system off and disconnect the power cord plug from the wall outlet, then call the store where you made your purchase. Using the system in this condition may cause fire or electrical shock.
Check to be sure you have all of the supplied accessories. The number in parentheses is the quantity of the pieces supplied. If anything is missing, contact your dealer immediately. Remote control (1) Batteries (2) FM antenna (1) AM loop antenna (1)
Note about copyright laws Check the copyright laws in your country before recording from the discs. Recording of copyrighted material may infringe copyright laws. Note about copyguard system The discs are protected by copyguard system. When you connect the system to your VCR directly, the copyguard system activates and the picture may not be played back correctly.
THS3-EN.book Page 3 Tuesday, February 24, 2004 8:35 PM
Playable disc types
This system has been designed to play back the following discs: DVD VIDEO, DVD AUDIO, Video CD (VCD), Super Video CD (SVCD), Audio CD (CD), CD-R and CD-RW. This system accommodates the PAL system, and also can play discs recorded with NTSC system. Note that an NTSC video signal on a disc is converted to the PAL60 signal and output. This system can also play finalized DVD-R/-RWs recorded in DVD VIDEO format. However, some discs may not be played because of their disc characteristics or recording conditions. Discs you can play: DVD VIDEO Audio CD Region code of DVD VIDEO DVD VIDEO players and DVD VIDEO discs have their own Region Code numbers. This system can play back DVD VIDEO discs whose Region Code numbers include the systems Region Code, which is indicated on the rear panel.
The buttons on the remote control are used to explain most of the operations in this manual. You can use the buttons on the center unit same as on the remote control for operations unless otherwise noted. IMPORTANT Before using the remote control for the following operation, Set the remote control mode selector to AUDIO.
The buttons described below are used on pages 13 to 15.
Turning the system on/off
On the remote control:
On the center unit:
When DVD is selected as the source (see page 14), the following messages will appear on the TV screen.
Source selecting buttons
AUDIO VOL AUDIO
Remote control mode selector
OPEN/CLOSE: Appears when opening or closing the disc tray. NOW READING: Appears when the system is reading the disc information. REGION CODE ERROR!: Appears when the Region Code of the DVD VIDEO does not match the code the system supports. The disc cannot be played back. NO DISC: Appears when no disc is loaded. CANNOT PLAY THIS DISC: Appears when unplayable disc is loaded.
The STANDBY lamp goes off when the power is turned on, and the lamp lights when the power is turned off. A small amount of the power is consumed even when the power is turned off. This is called standby mode and the STANDBY lamp lights in this mode. Unplug the power cord from the AC outlet to turn the power off completely. You can also turn on the system by pressing the following buttons; OPEN/CLOSE on the remote control or 0 on the center unit One of the source selecting buttons on the remote control 3 on the center unit. You can use the same buttons on the remote control except after pressing FM/AM.
SLEEP DIMMER CENTER L-SURR.-R
THS3-EN.book Page 14 Tuesday, February 24, 2004 8:35 PM
See page 13 for button locations.
Selecting the source to play
Listening with headphones (not supplied)
CAUTION Be sure to turn down the volume;
Before connecting or putting on headphones as high volume may damage both the headphones and your hearing. Before disconnecting headphones as high volume may be suddenly output from the speakers.
Press one of the source selecting buttons (DVD, FM/AM, AUX or TV SOUND).
To play back a disc (DVD VIDEO, VCD etc.). (See page 16.) FM/AM: To tune in an FM or AM (MW) station. (See page 35.) Each time you press the button, the band alternates between FM and AM (MW). AUX: To select the source from a component connected to the AUX IN jacks or DIGITAL IN jack. (See page 10.) Each time you press the button, the source alternates between AUX and AUX DIGITAL. TV SOUND: To select the TV (that outputs sound signals) connected to the AV (SCART) connector. (See page 9.) DVD: On the center unit:
While connecting a pair of headphones to the PHONES jack on the center unit, the system automatically cancels the surround mode (see page 20) currently selected, deactivates the speakers, and activates the headphone mode. HEADPHONE appears on the display window. Headphone mode When using the headphones, the following signals are output regardless of your speaker setting; For 2 channel sources, the front left and right channel signals are output from the headphones. Multi-channel signals are down-mixed and output from the headphones. (DVD AUDIO) When the disc prohibits down-mixing, only the front left and right channels are output from the headphones. In this case, L/R ONLY appears on the display window for a few seconds.
Adjusting the output level of the subwoofer and center/surround speakers [S.WFR, CENTER, L-SURR.-R]
Press S.WFR +/ to adjust the subwoofer. Press CENTER +/ to adjust the center speaker. Press SURR.-L +/ to adjust the surround left speaker. Press SURR.-R +/ to adjust the surround right speaker.
You can also make adjustments by using the setup menu shown on the TV screen. (See page 32.) The adjustments take effect for all sources. You cannot make this adjustment when FM or AM is selected as the source.
3 Press ENTER while the indication is
When PROGRESSIVE is selected, the PROGRESSIVE indicator lights on the display window. NOTE
Although the picture may be distorted when you press ENTER, this is not a malfunction of the system. RGB is selected at your purchase. There are some progressive TVs and High-Definition TVs that are not fully compatible with this system, resulting in an unnatural picture when playing back a DVD VIDEO in the progressive scan mode. In such a case, change the scan mode to RGB or Y/C COMP. To check the compatibility of your TV, contact your local JVC customer service center. All JVC progressive TVs and High-Definition TVs are fully compatible with this system.
Adjusting the treble sound [TREBLE]
Press TREBLE +/.
The adjustments take effect for all sources.
THS3-EN.book Page 16 Tuesday, February 24, 2004 8:35 PM
The mark for. IMPORTANT Before using the remote control for the following operation; 1 Set the remote control mode selector to AUDIO. 2 Press DVD. shows the types of discs the operation is available
1 Press OPEN/
The system turns on and the disc tray comes out. 0 on the center unit functions same as OPEN/CLOSE on the remote control.
The buttons described below are used on pages 16 to 19.
2 Place a disc.
Label side up When placing an 8 cm (3 inches) disc
3 Press 3 (play button).
(play button) Remote control mode selector
For MP3/WMA The file control display (see page 24) appears on the TV screen. For JPEG Each file (still pictures) is shown on the TV screen for about 3 seconds (slide-show). When stopping playback, the file control display (see page 24) appears on the TV screen. For MPEG4 disc Pressing TOP MENU or MENU shows the file control display (see page 24) on the TV screen during playback.
7 To pause
7 All Channel Stereo (DSP)
All Channel Stereo (ALL CH ST.) mode can reproduce a larger stereo sound field using all the connected (and activated) speakers. All Channel Stereo can be used while reproducing 2 channel stereo source.
Normal stereo sound All Channel Stereo
See page 20 for button locations.
7 When playing back 2 channel source
You can select either mode of Dolby Pro Logic II (PL II MOVIE/ PL II MUSIC) or the DSP (ALL CH ST.) mode.
Press SURR. repeatedly to select the desired mode.
The surround mode is turned on and the current surround mode appears on the display window. Each time you press the button, the surround mode changes. For details on each mode, see page 20. To turn off the surround mode
7 Indicators on the display window
Digital signal format indicators PPCM: Lights when DVD AUDIO packed PCM signals comes in. LPCM: Lights when Linear PCM signal comes in. GD: Lights when Dolby Digital signals come in. C: Lights when DTS Digital (Surround) signals come in. No indication: No digital signal indicator lights when analog signals come in. Dolby Surround/DSP mode indicators GPLII: Lights when Dolby Pro Logic II mode is activated. DSP: Lights when All Channel Stereo mode is activated. Source signal indicators, etc. Light to indicate the incoming signals. a: Lights when the front left channel signal comes in. b: Lights when the center channel signal comes in. c: Lights when the front right channel signal comes in. d: Lights when the LFE channel signal comes in. g: Lights when the surround left channel signal comes in. i: Lights when the surround right channel signal comes in. h: Lights when the monaural surround channel signal or 2 channel Dolby Surround signal comes in. SW : Always lights. The channel with shows that the corresponding speakers are reproducing the channels sound. If the channels sound decoded into 5.1 channel is reproduced, only lights.
Press SURR. repeatedly until SURR OFF appears on the display window.
Storing adjustments auto memory When you turn the power off, the system memorizes the current surround mode. The memorized mode is automatically recalled when you turn the power on. NOTE
When FM or AM is selected as the source, you cannot select any surround mode. For a down-mixing prohibited DVD AUDIO disc, the system continues to output multi-channel signals with MULTI CH shown on the display window even if the surround mode is turned off during playback. On the other hand, the system outputs only the front left and front right channel signals with LR ONLY shown on the display window when you start playback with the surround mode having been set to SURR OFF.
4 Press ON SCREEN.
The on-screen bar disappears.
THS3-EN.book Page 23 Tuesday, February 24, 2004 8:35 PM
Playing from a specified position on a disc
You can start playing a title, chapter or track you specify. You can also play a disc from specified time.
2 Press number buttons (1-10, +10) to
To return to the menu Press RETURN repeatedly until the menu screen appears. When NEXT or PREVIOUS is shown on the TV screen: To go to the next page, press x. To return to the previous page, press 4. NOTE
select the number of the desired item.
For details on using the number buttons, see How to use the number buttons. (See page 18.).
Locating a desired scene from the DVD menu
DVD VIDEOs generally have their own menus which show disc contents and you can display them on the TV screen. You can locate a desired scene by using these menus. 7 Whenever a DVD VIDEO is loaded
1 Press TOP MENU or MENU.
The menu appears on the TV screen.
If you want to play a PBC-compatible VCD/SVCD without using the PBC function, perform any of the following: Start playback by pressing number buttons while stopped. Press x repeatedly until the desired track number is displayed, then start playback by pressing 3 (play button). The track number appears on the display window instead of PBC. To activate the PBC function when playing a PBC-compatible VCD/ SVCD without using the PBC function, perform any of the following: Press TOP MENU or MENU. Press 7 twice to stop playback, then press 3 (play button).
Normally, a DVD VIDEO which contains more than one title will have a top menu which lists the titles. Press TOP MENU to show the title menu. Some DVD VIDEO may also have a different menu which is shown by pressing MENU. See the instructions for each DVD VIDEO regarding its particular menu.
Locating a desired chapter/track using the on-screen bar
7 During playback
2 Use Cursor 3/2/Y/5 to select a
The on-screen bar appears on the TV screen.
2 Press Cursor 3/2 to highlight
3 Press ENTER.
With some discs, you can also select items by entering the corresponding number using number buttons.
Example: During DVD VIDEO playback
Locating a desired scene using a VCD/ SVCD menu with PBC
A VCD or SVCD recorded with PBC has its own menus such as a list of contained songs. You can locate a specific scene by using these menus. 7 During playback with PBC function
4 Press number buttons (0-9) to enter the
desired chapter number.
Example: To select 8: To select 10: To select 37: Press 8. Press 1, then 0. Press 3, then 7.
1 Press RETURN repeatedly until the
menu appears on the TV screen.
To correct a misentry Repeat step 4.
THS3-EN.book Page 24 Tuesday, February 24, 2004 8:35 PM
5 Press ENTER. 6 Press ON SCREEN.
The on-screen bar disappears. NOTE
You can select up to the 99th chapter/track.
Using the file control display
You can search and play desired groups and tracks/files using the file control display on the TV screen.
Current group /total group number Playback mode (PROGRAM, RANDOM, REPEAT) Elapsed playing time of current track (for MP3/WMA/MPEG4 only)
Locating a desired position by specifying the time
You can locate a desired position by specifying the time from the beginning the disc (while stopped) or the current title/track (during playback). 7 For DVD VIDEO/DVD AUDIO: During playback For VCD/SVCD: While stopped or during playback without PBC function For CD: During playback or while stopped
Tag information (for MP3/ WMA only)
2 Press Cursor 3/2 to highlight 3 Press ENTER.
Current track (file) Total track (file) number on disc Playback status
4 Use number buttons (0-9) to enter the
You can specify the elapsed playing time from the beginning of the disc (while stopped) or from the beginning of the current title/track (during playback). Example: To play back from a point 2 (hours): 34 (minutes): 08 (seconds) elapsed
Press 2 Press 4 Press 8 Press 3 Press 0
Current track (file) / total track (file) number on current group
The file control display appears automatically during playback (for MP3/WMA) or while stopped.
To cancel a misentry Press Cursor 2 repeatedly.
You can specify time in hours/minutes/seconds for DVD VIDEO/ DVD AUDIO and in minutes/seconds for VCD/SVCD/CD.
THS3-EN.book Page 25 Tuesday, February 24, 2004 8:35 PM
7 For MP3/WMA: During playback or while stopped For JPEG/MPEG4: While stopped
When using the on-screen bar:
1 Press Cursor 3/2/Y/5 to select the
For MP3/WMA, playback starts from the selected track.
2 Press 3 (play button) or ENTER.
Track playback/slide-show starts from the selected track/ file. When you press ENTER for JPEG, only the selected file is played back. To skip the file during playback Press x/4 or Cursor 5/Y. NOTE
You can also check playback information on the display window. (See page 17.) Some group, track and file names may not be displayed correctly depending on recording conditions. The order of groups, tracks and files may be displayed differently from the order displayed on your personal computer.
1 Press A-B RPT at the beginning of the
part you want to repeat (point A).
The repeat mode indicator window. appears on the display
REPEAT TRACK, REPEAT STEP
2 Press A-B RPT again at the end of the
part you want to repeat (point B).
The repeat mode indicator on the display window changes to and A-B Repeat Playback starts. The selected part of the disc (between point A and B) is played repeatedly.
* During playback of a JPEG disc, REPEAT GROUP and REPEAT ALL do not appear on the TV screen. NOTE
When the Program mode is active with a DVD AUDIO, VCD, SVCD, or CD, the Repeat mode changes in the same manner. Note that, however, in the mode the system repeats all the programmed tracks, instead of all tracks on the disc. For DVD VIDEO and DVD AUDIO, REPEAT ALL may not be available depending on the disc.
To cancel Press A-B RPT during A-B Repeat Playback.
THS3-EN.book Page 30 Tuesday, February 24, 2004 8:35 PM
Sound and other settings
This function also takes effect for the sources other than DVD. Before you start operation; There is a time limit when doing the following steps. If the setting is cancelled before you finish, start from step 1 again.
1 Press SETTING.
BAL : CENTER
5 Press ENTER at the beginning of the
2 Press Cursor Y/5 to select the item
you want to set.
BAL (Balance): You can adjust the balance between the front left and front right speakers. DEC (Decode): When you play an external source (AUX DIGITAL is selected as a source) that was encoded with Dolby Digital or DTS Digital Surround, the following symptoms may occur; No sound comes out at the beginning of playback. Noise comes out while searching for or skipping chapters or tracks. AUT (Auto)/PCM:Normally select this. The system automatically detects the incoming signals. DOLBY D: Select this if the symptoms above occur when playing a disc (or software) encoded with Dolby Digital. DTS: Select this if the symptoms above occur when playing a disc (or software) encoded with DTS Digital Surround. A. POS (Audio Position): Set the audio position of subwoofer so that the subwoofer level can be automatically adjusted properly. (The smaller the number becomes, the more the level decreases automatically when listening in stereo.)
Select this when you want to fully apply the compression effect (useful at midnight). Select this when you want to enjoy surround sound with its full dynamic range (no effect applied).
4:3 PS (Pan Scan conversion)
When you play a multichannel Dolby Digital source with the surround mode is off, the setting of D. RANGE COMPRESSION is set to ON automatically.
Ex.: 4:3 LB
Ex.: 4:3 PS
: Speaker setting menu (SPK. SETTING)
7 Level menu (LEVEL)
CENTER SPEAKER/SURROUND LEFT SPEAKER/ SURROUND RIGHT SPEAKER/SUB WOOFER Adjust the output level of related speakers. TEST TONE*
Outputs the test tone.
Even if 4:3 PS is selected, the screen size may become 4:3 LB with some DVDs. This depends on how DVDs are recorded.
7 PICTURE SOURCE
When you set the scan mode to PROGRESSIVE (see page 15), you can obtain optimal picture quality by selecting whether the content on the disc is processed by field (video source) or by frame (film source). Normally set to AUTO.
Returns to the SPK. SETTING menu.
Suitable for playing back a video source disc. Suitable for playing back a film source disc. Used to play a disc containing both video and film source materials. This system recognizes the source type (video or film) of the current disc according to the disc information. If the playback picture is unclear or noisy, or the oblique lines of the picture are rough, try to change to other modes.
* The test tone comes out of all of the activated speakers in the following sequence:
s Front left speaker s Center speaker s Front right speaker s Surround right speaker s Surround left speaker s (back to the beginning)
7 SCREEN SAVER (See page 18.)
You can activate or deactivate Screen Saver function.
7 FILE TYPE
When several types of files are recorded on a disc, you can select which files to play. After changing FILE TYPE setting, be sure to turn the power off, then turn the power on to enable the new setting.
AUDIO STILL PICTURE VIDEO
Select this to play MP3/WMA files. Select this to play JPEG files. Select this to play MPEG4 files.
THS3-EN.book Page 33 Tuesday, February 24, 2004 8:35 PM
7 Distance menu (DISTANCE)
Center speaker Subwoofer Front right Front left 3.0 m 2.7 m 2.4 m 2.1 m
7 Parental lock menu (PARENTAL LOCK)
You can restrict playback of a DVD VIDEO containing violent scenes that is not suitable for your other family members. This setting takes effect only for DVDs containing the Parental Lock level information Level 1 (most restrictive) to Level 8 (least restrictive).
COUNTRY CODE SET LEVEL
Select this when you set the code for your resident. (See page 34.) Select this when you set the level of restriction. This item is selected automatically when some changes are made on Parental Lock setting. Enter a four-digit number as your password with number buttons 0-9, then press ENTER.
In this case, set the distance of each speaker as follows; Distance of front speakers: 3.0 m Distance of center speaker: 2.7 m Distance of surround speakers: 2.4 m FRONT SPEAKER/CENTER SPEAKER/SURROUND SPEAKER Adjust the distance from the listening position to the speakers.
Within the range from 0.3 m to 9.0 m. (by 0.3 m)
If you have failed to enter your correct password three times, you cannot select an item other than EXIT. In such a case, press ENTER to exit the mode, then try the setting again.
Returns to OTHERS menu.
Be sure to exit the Parental Lock setting mode after entering your password. Otherwise, the changes you made wont be stored. If you forget your password, enter 8888 instead of your password. NOTE
When you enter wrong passwords three times, you can select EXIT only.
: Other setting menu (OTHERS)
7 RESUME (See page 25.)
You can activate or deactivate Resume Playback function.
7 ON SCREEN GUIDE
You can activate or deactivate the on-screen guide icons. (See page 16.)
THS3-EN.book Page 34 Tuesday, February 24, 2004 8:35 PM
Country/Area codes list for Parental Lock
AD AE AF AG AI AL AM AN AO AQ AR AS AT AU AW AZ BA BB BD BE BF BG BH BI BJ BM BN BO BR BS BT BV BW BY BZ CA CC CF CG CH CI CK CL CM CN CO CR CU CV CX CY CZ DE DJ DK DM DO DZ EC EE EG EH Andorra United Arab Emirates Afghanistan Antigua and Barbuda Anguilla Albania Armenia Netherlands Antilles Angola Antarctica Argentina American Samoa Austria Australia Aruba Azerbaijan Bosnia and Herzegovina Barbados Bangladesh Belgium Burkina Faso Bulgaria Bahrain Burundi Benin Bermuda Brunei Darussalam Bolivia Brazil Bahamas Bhutan Bouvet Island Botswana Belarus Belize Canada Cocos (Keeling) Islands Central African Republic Congo Switzerland Cte dIvoire Cook Islands Chile Cameroon China Colombia Costa Rica Cuba Cape Verde Christmas Island Cyprus Czech Republic Germany Djibouti Denmark Dominica Dominican Republic Algeria Ecuador Estonia Egypt Western Sahara ER ES ET FI FJ FK FM FO FR FX GA GB GD GE GF GH GI GL GM GN GP GQ GR GS GT GU GW GY HK Eritrea Spain Ethiopia Finland Fiji Falkland Islands (Malvinas) Micronesia (Fedelated States of) Faroe Islands France France, Metropolitan Gabon United Kingdom Grenada Georgia French Guiana Ghana Gibraltar Greenland Gambia Guinea Guadeloupe Equatorial Guinea Greece South Georgia and the South Sandwich Islands Guatemala Guam Guinea-Bissau Guyana Hong Kong LA LB LC LI LK LR LS LT LU LV LY MA MC MD MG MH ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ NA NC NE NF NG NI NL NO NP NR NU NZ OM PA PE PF PG PH PK PL PM PN PR PT PW PY QA RE RO RU Lao Peoples Democratic Republic Lebanon Saint Lucia Liechtenstein Sri Lanka Liberia Lesotho Lithuania Luxembourg Latvia Libyan Arab Jamahiriya Morocco Monaco Moldova, Republic of Madagascar Marshall Islands Mali Myanmar Mongolia Macau Northern Mariana Islands Martinique Mauritania Montserrat Malta Mauritius Maldives Malawi Mexico Malaysia Mozambique Namibia New Caledonia Niger Norfolk Island Nigeria Nicaragua Netherlands Norway Nepal Nauru Niue New Zealand Oman Panama Peru French Polynesia Papua New Guinea Philippines Pakistan Poland Saint Pierre and Miquelon Pitcairn Puerto Rico Portugal Palau Paraguay Qatar Runion Romania Russian Federation RW SA SB SC SD SE SG SH SI SJ SK SL SM SN SO SR ST SV SY SZ TC TD TF TG TH TJ TK TM TN TO TP TR TT TV TW TZ UA UG UM US UY UZ VA VC VE VG VI VN VU WF WS YE YT YU ZA ZM ZR ZW Rwanda Saudi Arabia Solomon Islands Seychelles Sudan Sweden Singapore Saint Helena Slovenia Svalbard and Jan Mayen Slovakia Sierra Leone San Marino Senegal Somalia Suriname Sao Tome and Principe El Salvador Syrian Arab Republic Swaziland Turks and Caicos Islands Chad French Southern Territories Togo Thailand Code Language Tajikistan Tokelau Turkmenistan Tunisia Tonga East Timor Turkey Trinidad and Tobago Tuvalu Taiwan Tanzania, United Republic of Ukraine Uganda United States Minor Outlying Islands United States Uruguay Uzbekistan Vatican City State (Holy See) Saint Vincent and the Grenadines Venezuela Virgin Islands (British) Virgin Islands (U.S.) Vietnam Vanuatu Wallis and Futuna Islands Samoa Yemen Mayotte Yugoslavia South Africa Zambia Zaire Zimbabwe
THS3-EN.book Page 36 Tuesday, February 24, 2004 8:35 PM
See page 35 for button locations.
Selecting the FM reception mode
When the stereo FM program currently tuned in is noisy, you can change the FM reception mode to improve the reception. 7 While listening to an FM station
With the system, you can receive the following types of RDS signals: PS (Program Service): Shows commonly known station names. PTY (Program Type): Shows types of broadcast programs. RT (Radio Text): Shows text messages the station sends. Enhanced Other Network: See page 38. NOTE
RDS is not available for AM (MW) broadcasts. RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak.
Press FM MODE.
The FM reception mode appears on the display window. Each time you press the button, the FM reception mode changes.
When a program is broadcast in stereo, you will hear stereo sound. (The ST indicator lights on the display window.) When in monaural, you will hear monaural sound. This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights on the display window.
Reception will be improved although you will lose the stereo effect. (The ST indicator goes off.) In this mode, you will hear noise until you are tuned in to a station. (The AUTO MUTING indicator also goes off.)
7 To show the RDS signals information
Press RDS DISPLAY while listening to an FM station.
Each time you press the button, the indication on the display window changes. PS (Program Service): While searching, PS appears and then the station names will be displayed. NO PS appears if no signal is sent. PTY (Program Type): While searching, PTY appears and then the type of the broadcast program will be displayed. NO PTY appears if no signal is sent. RT (Radio Text): While searching, RT appears and then text messages the station sends will be displayed. NO RT appears if no signal is sent. Frequency: Station frequency (non-RDS service). About characters shown on the display window When PS, PTY, or RT signals appear on the display window, some special characters and marks may not be displayed correctly. NOTE
Classification of the PTY codes for some FM stations may be different from the above list.
7 To search for a program using the PTY codes
NOTE Before you start operation;
The PTY Search is only applicable to preset stations. To stop searching any time during the process, press PTY SEARCH while searching. There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
1 Press PTY SEARCH while listening to
an FM station.
PTY SELECT flashes on the display window. While PTY SELECT is flashing:
2 Press PTY 9 or PTY ( until the PTY
For details, see Description of the PTY codes. While the PTY code selected in step 2 is still on the display window:
code you want appears on the display window.
3 Press PTY SEARCH again.
While searching, SEARCH and the selected PTY code alternate on the display window. The system searches 30 preset FM stations, stops when it finds the one you have selected, and tunes in that station. To continue searching after the first stop Press PTY SEARCH again while the indications on the display window are flashing. If no program is found, NOT FOUND appears on the display window.
THS3-EN.book Page 38 Tuesday, February 24, 2004 8:35 PM
Switching to broadcast program of your choice temporarily
Another convenient RDS service is called Enhanced Other Network. This allows the system to switch temporarily to a broadcast program of your choice (TA, NEWS, and/or INFO) from a different station except in the following cases: When you are listening to non-RDS stations (all AM MW stations, some FM stations and other sources). When the system is in standby mode. NOTE Before you start operations;
The Enhanced Other Network function is only applicable to preset stations.
The TEST signal is used for equipment test whether it can receive the Alarm signal correctly The TEST signal makes the system work in the same way as the Alarm signal does. If the TEST signal is received, the system automatically switches to the station broadcasting the TEST signal. While receiving the TEST signal, TEST appears on the display window.
7 How the Enhanced Other Network function actually works
If there is no station broadcasting the program you have selected
The system continues tuning in to the current station. When a station starts broadcasting the program you have selected, the system automatically switches to the station. The indicator of received PTY code starts flashing. When the program is over, the system goes back to the previously tuned station, but the Enhanced Other Network function still remains activated. Case 2
If the FM station you are listening to is broadcasting the program you have selected
Press TA/NEWS/INFO repeatedly until the program type indicator (TA/NEWS/INFO) you want appears on the display window.
Designs & specifications are subject to change without notice.
THS3[B]-09cov4.fm Page xliv Tuesday, March 2, 2004 9:17 PM
TH-S3 DVD DIGITAL CINEMA SYSTEM
EN 2004 VICTOR COMPANY OF JAPAN, LIMITED
Note about copyguard system
FM antenna (1) AM loop antenna (1) Composite video cord (1)
The discs are protected by copyguard system. When you connect the system to your VCR directly, the copyguard system activates and the picture may not be played back correctly.
Region code of DVD VIDEO DVD VIDEO players and DVD VIDEO discs have their own Region Code numbers. This system can play back DVD VIDEO discs whose Region Code numbers include the system's Region Code, which is indicated on the rear panel. Example of playable DVD:
and also can play
has been designed
to play back the following
DVD VIDEO, DVD AUDIO, Video CD (VCD), (SVCD), Audio CD (CD), CD-R and CD-RW. This system accommodates the NTSC discs recorded with PAL system. system,
Super Video CD
This system can also play finalized DVD-R/-RWs recorded in DVD VIDEO I_rmat. However, some discs may not be played because of their disc characteristics or recording conditions.
Discs you can play: DVD VIDEO Audio CD
If a DVD with an improper Region Code number is loaded, "REGION CODE ERROR!" appears on the TV screen and playback cannot start. About files (tracks) and folders (groups) on the disc This system can also play MP3, WMA, JPEG and MPEG4 files recorded on CD-Rs and CD-RWs. Files are sometimes grouped into folders on CD-Rs or CD-RWs by genre, album, etc. In this manual, "group" is also referred to as "folder", and "track" as "file". This system recognizes up to 150 files per group, and 99 groups per disc. The total number of files this system can detect on a disc is up to 1000.
The following discs cannot be played back: DVD-ROM, DVD-RAM, CD-ROM, CD-I (CD-I Ready), Photo CD, SACD, etc. Playing back these discs will generate noise and damage the speakers. On some DVD VIDEOs, DVD AUDIOs, VCDs or SVCDs, their actual operation may be different from what is explained in this manual. This is due to the disc programming and disc structure, not a malfunction of this system.
The system can play back the MPEG4 conditions below: File format: ASF Visual profile: MPEG4 Audio CODEC: G.726 Max. picture Max. bit rate: 384 kbps SP (Simple
size: 352 x 288 (CIF)
be skipped or may not be played normally. Some files on a JPEG/MPEG4 disc may be played Notes on MPa/WMA/JPEG/MPEG4 discs
MP3/WMA/JPEG/MPEG4 require a longer readout
discs (either CD-R or CD-RW) time. (It differs clue to the complexity files with one of the following of upper
the directory/file configuration.) The system can only recognize extensions, case: MP3: WMA:
which can be in any combination ".MP3", ".WMA', ".rap3" ".wma"
JPEG: ".JPG', ".JPEG", ".jpg", ".jpeg" MPEG4: ".ASF", ".asl" If different kinds of the file are mixed on a disc, set the FILE TYPE setting in the PICTURE menu to the appropriate "STILL PICTURE", setting or for the data to be read ("AUDIO", "VIDEO"). (See page 32.)
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property other rights owners. rights owned by Macrovision Corporation and Use of this copyright protection technology for
USE OF THIS PRODUCT
IN ANY MANNER
WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED, EXCEPT FOR USE BY A CONSUMER ENGAGING IN PERSONAL AND NON-COMMERCIAL ACTIVITIES.
must be authorized by Macrovision Corporation, and is intended home and other limited viewing uses only unless otherwise authorized by Macrovision disassembly is prohibited. "CONSUMERS DEFINITION Corporation. Reverse engineering HIGH or
SHOULD NOTE THAT NOTALL
TELEVISION SETS ARE FULLY COMPATIBLE TO BE
THIS PRODUCT AND MAY CAUSE ARTIFACTS DISPLAYED IN THE PICTURE. PROGRESSIVE RECOMMENDED SCAN PICTURE DEFINITION'
IN CASE OF 525 OR 625 PROBLEMS, OUTPUT. OUR 71/SET IT IS
THAT THE USER SWITCH THE CONNECTION REGARDING
Make sure the antenna conductors do not tonch any other terminals, connecting cords and power cords. This could cause poor reception.
Do not connect the power cord until all other connections have been made.
the black cords to the black (-) terminals. the white cords to the red (+) terminals.
/ [<_ _
is used in the illustration
When you connect speakers other than the supplied (SPEAKER ones, use IMPEDANCE) speakers of the same speaker impedance indicated on the rear of the center unit. DO NOT connect
When installing the satellite speakers on the wall: Be sure to have them installed on the wall by a qualified personnel. DO NOT install the satellite speakers on the wall by yourself to a,_oid unexpected damage lix)m their falling off the wall due Io incorrect installation or weakness in wall structure. Care must be taken in selecting a location lot speaker installation on a wall. Injury to personnel or damage to equipment may result if the speakers installed interfere with daily activities.
more than one speaker to one speaker terminal.
Do not connect
power cord until all other connections
have been made.
Front right speaker
Distortion of picture may occur when connecting the TV via a VCR, or to a TV with a built-in VCR. You need to set "MONITOR TYPE" in the PICTURE menu correctly according to the aspect ratio of your TV. (See page 32.)
To connect a TV equipped with the componentvideo input jacks
Center unit TV To component video input
Surround left "-. speaker "-J
-J Surround speaker
Component NOTE Although the satellite speakers and the subwoofer are magnetically NOTE
video cord (not supplied)
shielded, the TV screen may appear mottled. In this case. keep enough distance between the speakers and the TV. The speakers are magnetically shielded to a,_oid color distortions TVs. However. if not installed properly, it may cause color distortions. So, pay attention to the following when installing the speakers. - When placing the speakers near a TV set, turn offthe TV's main power switch or unplug it before installing the speakers. Then wait at least 30 minutes power switch again. before turning on the TV's
Plug into AC outlets.
Disconnect the power cord bel\we cleaning or moving the system. Do not pull on the power cord to unplug the cord. When unplugging the cord, always grasp and pull the plug so as not to damage the cord. NOTE Preset settings, such as preset stations and surround mode adjusm_ent, may be erased in a few days in the lMlowing cases: lfyou unplug the power cord of the center unit. lfa power t'ailure occurs.
Operatingexternalcomponents iththe remotecontrol w 4
12. The buttons described below are used on pages 11 and
Press number buttons (1-9, O) to enter the manufacturer's code (2 digits).
Examples: For a Hitachi TV:
Press 1, then 0. For a Toshiba TV: Press 0, then 8.
0/t VCR /t TV
Manufacturer JVC Hitachi Magnavox Mitsubishi
Code 04, 11 05
Manufacturer Samsung Sanyo Sharp Sony Toshiba Zenith
Code O6 O7 O8 O9
TV VOL +/- ,2 CHANNEL +/- -
Remote control mode selector
If there is more than one code listed for corresponding try each one until you enter the correct one.
control at the TV.
Aim the remote
Number buttons Before using the remote control to operate a TV; Set the remote control mode selector to TV. The following (b/I TV:Turns 100+ buttons are available: TV on and off. the volume.
TV VOL +/-:Ac[iusts
TVNIDEO:Selects the input mode (either TV or VIDEO). CHANNEL +/-:Changes the channels. 1-10, 0, +10 (100+):Selects the channel. TV RETURN:Alternates between the previously and the current channel. selected channel
NOTE Mmmlactmers' codes are subject to change without notice. Set the codes again after replacing the batteries ofthe remote control.
To set the manufacturer's
:t JVC TV without
setting the manufacturer's code.
You can operate
1 Slide the remote control to TV. 2 Press and hold cb/ITV.
Keep the button pressed
until step 4 is finished.
Operating externalcomponents with the remotecontrol
See page 11 for button locations.
Aim the remote control at the VCR.
To set the manufacturer's code
1 Slide the remote control to VCR. Press and hold
Be_re using the remote control to operate a VCR; Set the remote control mode selector to VCR.
The following d)/IVCR:Turns buttons are available: VCR on and oft'. playback.
(play button):Starts re:Stops operation. II:Pauses playback. I_1_ :Fast forwards
Press ENTER. Press number buttons (1-9, 0) to enter the manufacturer's code (2 digits).
Examples: For a Panasonic Press VCR:
video tape. with _ (play button) to start
_l_l:Rewinds video tape. REC:Press this button together
recording or together with II to pause recording. CHANNEL +/-:Changes the TV channels on the VCR.
1, then 7.
For all Philips VCR: Press O, then 9. Manufacturer JVC Emerson Fisher Funai Gold Star Hitachi Mitsubishi NEC Panasonic Code 0l, 02, 03 11, 10, 14-25 07, 17 Manufacturer Philips RCA Samsung Sanyo Sharp Shintom Sony Zenith Code 09 05, 21-23 27.18-20 08
If there is more than one code listed for your brand, one until you enter the correct one.
The buttons on the remote control are used to explain most of the operations in this manual. You can use the buttons on the center unit same as on the remote control for operations unless otherwise noted.
On the remote
Press (3/I AUDIO.
On the center unit:
IMPORTANT Belbre using the remote control for the following operation, Set the remote control mode selector to AUDIO. The buttons described below are used on pages 13 to 15.
When DVD is selected as the source (see page 14), the Ibllowing messages will appear on the TV screen.
MUTING 'oo Source_ selecting buttons
AUDIO VOL +/-
_,_0,oL_ Remote control
"OPEN"i"CLOSE": Appears when opening or closing the disc tray. "NOW READING": Appears when the system is reading the disc information. "REGION CODE ERROR!": Appears when the Region Code of the DVD VIDEO does not match the code the system supports. The disc cannot be played back. "NO DIS(:": Appears when no disc is loaded. "CANNOT PLAY THIS DISC"" Appears when unplayable disc is loaded.
/_ SCAN M00E _h d.
NOTE The STANDBY lamp goes off when the power is turned on, and the lamp lights when the power is turned oft'. A smal! amount of the power is consumed even when the power is turned off. This is called standby mode and the STANDBY lmnp lights in this mode. Unplug the power cord from the A( outlet to turn the power oft"completely. You can also turn on the system by pressing the following buttons; OPEN/CLOSE on the remote control or A on the center unit One of the source selecting buttons on the remote control _- on the center unit. You can use the same buttons on the remote control except after pressing FM/AM.
: the disc cannot
NOTE (For JPEG) The system cannot accept operations even thongh you press any buttons before the entire picture appears on the TV screen If you do not want the on-screen guide icons to appear, see page 33.
Playback information on the display window
MP3/WMA Example: When encoded with Dolby Digital 5.1 ch is played an MP3 disc is played Track number disc
See page 16 for button locations.
DVD VIDEO Example: When a DVD VIDEO Chapter
back Signal and speaker indicators
Elapsed playing time (hour:minute:second)
Signal and speaker
(See page 21.) * WMA indicator
MP3 indicator* indicators
playing time (minute:second) (during playback only) disc.
Surrot nd mode and digital signal format
(See page 21.)
lights for WMA
FL DISR Title number Chapter number
Pressing FL DISR
Signal and speaker indication
NOTE "WMA" JPEG appears instead of"MP3" when playing a WMA track
disc Group number File number
Track number t Pressing FL DISR Group number Track number Signal and speaker indicators
VCD/SVCD/CD Example: When a CD is played back
Track number Signal and speaker indicators
playing time (minute:second) (during playback only)
Group number Track number
Elapsed playing time (minute:second) NOTE
NOTE "VCD" appears instead o1""(D" when loading a VCD or SVCD. When a VCD or SVCD with PBC fnnction is played, the elapsed playing time does not appear, but "PBC" appears.
Yon can change the time information mode (except for MP3iWMA, JPEGiMPEG4). (See page 22.) You can also check the playback information on the TV screen. (See page 21.)
A TV screen may burn out if a static picture is displayed for a long if a time. To prevent this, the system automatically dims the screen static picture is displayed for over 5 minutes (the screen saver function). Pressing any button will cancel the screen saver saver function. function, see page 32. If you do not want to use the screen
I See page 16 for button locations.
You can move back the playback from the current During position.
by l0 seconds
For DVD VIDEO (chapter): During playback For VCDiSVCD (track): During playback without PBC function For DVD AUDIOiCDMP3iWMAiJPEGiMPEG4 During playback or while stopped
Press _-_ or _4_ repeatedly.
NOTE When playing back an MP3iJPEG disc, you can make operations
On the remote control=
NOTE This function works m the same title. This feature may not work for some discs.
using the file control display. (See page 24.) This f_ature may not work lbr some discs.
Using number buttons on the remote control
For DVD VIDEO (title, chapter): While stopped, the title number is selected. During playback, the chapter number is selected. For DVD AUDIO (track): During playback or while stopped For VCDiSVCD (track): During playback without PBC function For CD MP3_MAiJPEGiMPEG4 (trac_file): During playback or while stopped
Press _-_ or -,,_.
Each time you press the button, xl0, x20, x60). To return to normal speed the search speed changes ( x 2, x 5,
Press number buttons the desired number.
For details on using the number number buttons" below.
(0-10, +10) to select
buttons, see "How to use the
How to use the number
To select To select To select 3: 14: 24: Press 3. Press Press Press
Press I._ (play button). On the center unit= does not take effect for
+10, then 4. +10 twice, then 4. +10 three times, then 10. four times, then 0.
Continuously reverse NOTE search
To select 40:
Press and hold _
Or press +10
IH_l or I_l_l increases
speed ( x 5 --_ x 20).
When a DVD VIDEO, VCD, SVCD or MPEG4 is played back, no sound comes out dnring fast-forward/reverse search. When a DVD AUDIO or CD is played back, sound is intermittent low dnring fasMbrward;reverse search. This feature may not work lbr some discs. and
page 16 for button
Some During stopped. playback or while
have a special
group" whose contents are not open to the public. The bonus group is ahvays assigned to the last group of a disc. To play back a bonus group, you have to enter the specific number" (a password). The way of getting the key number "key depends
1 Press TITLE/ GROUP.
" o1". is shown in the title group display area in the display window. Example: During DVD VIDEO playback
on the disc. After getting the key number, you can play back the bonus group by following the procedure below. While the BONUS indicator lights up on the display window
1 Select the bonus group.
For selecting the group, using number buttons". The key number On the TV see "Locating a desired titlegroup
the display window shows " " or "_", use number buttons (0-10, +10) to enter the desired title or group number,
The system starts playback from the first chapter track/file of" the selected title/group. For details on using the number buttons, see "How to use the number buttons". (See page 18.)
On the display
NOTE This feature may not work l_r some discs.
Press number buttons (0-9) to enter the key number, then press ENTER.
When you enter the correct key number, playback starts and entry the BONUS indicator goes off. If you enter the wrong number,
the key number
indication still appears on the TV screen. reenter the correct numben
In this case,
To clear the key number entry Pertbrm whichever one of the fbllowing: Press II. Open the disc tray. Tnm offthe system.
The mark for. [ The buttons described below are used on pages 2O to 3O. ]  shows the types of discs the operation is available
Auto Surround (AUTO SURR)
automatically selects tile appropriate surrouM mode source a nmltichannel audio.
This function AUDIO _
AUDIO SUBTITLE SURR
SURR. SU8TmTLE Remotecontrol modeselector
according to the input signals. For example, is automatically reproduced in multichannel
playback format and Dolby
Dolby Pro Logic IF :4
Dolby Pro Logic lI has a developed multichannel to decode all 2 channel sources -- stereo source Surround encoded source -- into a 5.1 channel. Dolby Pro Logic m od e: II has two modes
TOP NEN MENU
Movie mode and Music
Pro Logic II Movie (PL II MOVIE) Suitable for reproduction of Dolby Surround bearing the mark Eln_. Pro Logic II Music (PL II MUSIC) Suitable for reproduction of any 2 channel
ENTER ON SCREEN
to select a desired
Tile on-screen bar appears on tile TV screen.
Press Cursor =,-/_ to highlight PAGE
Press Cursor _/_ the VFP mode.
Press Cursor still picture. Press ENTER.
NORMAL:Normally select this. CINEMA: Suitable for movies. When you select "NORMAL" or "CINEMA", press VFP to complete the setting. USER 1 and USER 2: You can adjust parameters that affect picture appearance. Only when selecting "USER 1 " or "USER 2" in step 2, proceed to perform the following operation;
a parameter you want to adjust.
Adjust gradually and confirm picture appearance results are as preferred. GAMMA: Controls brightness of neutral tints while maintaining brightness of dark and bright portions. BRIGHTNESS: Controls screen brightness. CONTRAST: Controls screen contrast. SATURATION: Controls screen color depth. TINT: Controls screen tint. SHARPNESS: Controls screen sharpness.
During playback or while paused
Each time you press ZOOM, scene magnification changes.
While zoomed in, press Cursor to move zoom-in area.
To return to normal playback Press ZOOM repeatedly to select OFE NOTE The number of the magnification steps varies depending on the disc type. During slide-show playback of a JPEG disc, zooming in is not available. In such a case, press II to pause slide-show playback, then
During playback of DVD AUDIO, this ti:ature is available only fk_r the video part. During playback of JPEG/MPEG4, there may be a case where Cursor (1_/._/V/A ) does not work in step 2.
To clear the programs one by one from the last entered number Press CANCEL repeatedly. To clear all programs Press. You can also clear the program by turning off the system.
Press Cursor setting. Press ENTER.
Press _ (play button) to start Program Playback.
It"all of tile programmed tracks!files ha_,e been played back, playback stops and the program window appears again. Note that program setting remains.
The current VFP settings appear again.
Repeat steps 3 to 6 to adjust other parameters. Press VFP.
To check the program contents Dnring playback, press I. Playback stops and the program window appears. To quit the Program mode While stopped, press PLAY MODE repeatedly until both program window and "RANDOM" disappears t_om the TV screen. NOTE The Resume ftmction cannot be used with Progrmn Playback. Program Playback may not work for some discs.
NOTE Although the setting display disappeals in the mMdle of the procedure, the seaing at Ihat time will be stored.
PLAY MODE repeatedly until program window appears on the TV screen.
You can play titles or tracks on a disc in random order. While stopped
PLAY MODE repeatedly until "RANDOM" appears on the TV screen. )- (play button).
SET UP -
BO BR CA
CO CS CY DA DZ EL EO ET EU FA FI
Follow the instructions the TV screen.
FJ FO FY GA GD GL GN
MENU LANGUAGE languages. Some DVDs have their own menus in multiple Select the initial menu language*.
GU HA HI HR HU HY IA IE
AUDIO LANGUAGE Some DVDs have multiple audio hmguages. Select the initial audio language*.
Some DVDs have multiple subtitle subtitle hmguages. Select the initial ON SCREEN language*.
LANGUAGE shown on the TV screen when operating this
Select the language system. ": When the language language
yon have selected is automatically
is not recorded
to a disc,
the original language.
used as the initial
MONITOR TYPE type to match your TV when you phty You can select tile monitor DVDs recorded in the picture's height/width ratio of 16:9. 16:9 (Wide television conversion) Select this when the aspect ratio of your TV is 16:9 (wide
D. RANGE COMPRESSION
(Dynamic range compression) You can enjoy low level recorded low volume ON when listening sound clearly at night even at a Digital.
to the sound
4:3 LB (Letter Box conversion) Select this when tile aspect ratio of your TV is 4:3 (conventional TV). While viewing a wide screen picture, the black bars appear on the top and the bottom of the screen. 4:3 PS (Pan Scan conversion) Select this when tile aspect ratio of your TV is 4:3 (conventional TV). While viewing a wide screen picture, the black bars do not appear, however, the left and right edges of the pictures will not be shown on the screen. I
Select this when you want to filly effect (usefld at midnight). AUTO
apply the compression
Select this when you want to enjoy surround full dynamic range (no effect applied). NOTE
When you play a muhichannel Dolby Digital source with the surround mode is off, the setting of D. RANGE COMPRESSION set to ON automaticully.
I Ex.: 16:9 Ex.: 4:3 LB Ex.: 4:3 PS
:Speakersettingmenu (SPK. SETTING)
Level menu (LEVEL)
CENTER SPEAKER/SURROUND RIGHT SPEAKER/SUB speakers. LEFT SPEAKER/ SURROUND Adjust WOOFER
NOTE E_en it'"4:3 PS" is selected, tile screen size may become "4:3 LB" with some DVDs. This depends on how DVDs are recorded. PICTURE SOURCE (see page 15), you whether the content or by frame (fihn
the output TONE*
level of rehtted
When you set the scan mode to PROGRESSIVE can obtain optimal picture quality by selecting on the disc is processed
by field (video
the test tone, menu, speakers in the
Normally set to "AUTO". VIDEO Suitable FILM Suitable AUTO for phtying for playing back a video source back a fihn source disc. disc.
Returns to the SPK. SETTING ": The test tone comes t\qlowing sequence:
out of all of the activated
=> Front left speaker speaker => Surround speaker
=> Center speaker => Front right right speaker => Surround left
Used to play a disc containing materials.
both video and fihn source
=> (back to the beginning)
This system recognizes the source type (video or film) of the current disc according to the disc information. If the playback picture is unclear or noisy, or the oblique lines of the picture are rough, try to change to other modes. SCREEN SAVER (See You can activate or deactix.ate page 18.) Screen Sax.er function.
When se'_eral types of files are recorded on a disc, you can select which files to play. Alter changing FILE TYPE setting, be sure to turn the power oft', then turn the power on to enable the new setting. AUDIO Select this to phty MP3/WMA files. STILL PICTURE Select this to play JPEG files. VIDEO Select this to phty MPEG4 files.
Example: Center speaker
Parental lock menu (PARENTAL LOCK)
You can restrict playback of a DVD VIDEO containing _.iolent scenes that is not suitable for your other family members. This setting takes effect only for DVDs containing the Parental Lock level int_rmation Level 1 (most restrictive) to Level 8 (least restrictive). COUNTRY CODE Select this when you set the code for your resident. (See page 34.) SET LEVEL Select this when you set the level of restriction. PASSWORD This item is selected automatically when some changes are made on Parental Lock setting. Enter a four-digit number as your password with number buttons 0-9, then press ENTER. If you have failed to enter your correct password three times, you cannot select an item other than EXIT. In such a case, press ENTER to exit the mode, then try the setting again. EXIT Returns to OTHERS menu. Be sure to exit the Parental Lock setting mode after entering your password. Otherwise, the changes you made won't be stored. If you forget your password, enter "8888" instead of your password. NOTE When you enter wrong passwords three times, you can select"EX1T" only.
LA LB LC LI LK LR LS LT LU LV LY MA MC MD MG MH ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ NA NC NE NF NG NI NL NO NP NR NU NZ OM PA PE PF PG PH PK PL PM PN PR PT PW PY QA RE RO RU
Lao People's Democratic Republic Lebanon Saint Lucia Liechtenstein SriLanka Liberia Lesotho Lithuania Luxembourg Latvia Libyan Arab Jamahiriya Morocco Monaco Moldova. Republic of Madagascar Marshall Islands Mali Myanmar Mongolia Macau Northern Mariana Islands Martinique Mauritania Montserrat Malta Mauritius Maldives Malawi Mexico Malaysia Mozambique Namibia New Caledonia Niger Norlk_lk Island Nigeria Nicaragua Netherlands Norway Nepal Nauru Niue New Zealand Oman Panama Peru French Polynesia Papua New Guinea Philippines Pakistan Poland Saint Pierre and Miquelon Pitcairn Puerto Rico Portugal Palau Paraguay Qatar Rdunion Romania Russian Federation
RW SA SB SC SD SE SG SH SI SJ SK SL SM SN SO SR ST SV SY SZ TC TD TF TG TH TJ TK TM TN TO TP TR TT TV TW TZ IJA UG 1JM US UY UZ VA VC VE VG VI VN VU WF WS YE YT Y1J ZA ZM ZR ZW
Rwanda Saudi Arabia Solomon Islands Seychelles Sudan Sweden Singapore Saint Helena Slovenia Svalbard and Jan Mayen Slowtkia Sierra Leone San Marino Senegal Somalia Suriname Sao Tome and Principe E1 Salvador Syrian Arab Republic Swaziland Turks and Caicos Islands Chad French Southern Territories Togo Thailand Code Language T_iikistan Tokelau Turkmenistan Tunisia Tonga East Timor Turkey Trinidad and Tobago Tuvalu Taiwan Tanzania. United Republic of 1dkraine 1dganda United States Minor Outlying Islands United States 1Jruguay Uzbekistan Vatican City State (Holy See) Saint Vincent and the Grenadines Venezuela Virgin Islands (British) Virgin Islands (U.S.) Vietnam Vanuatu Wallis and Futuna Islands
Yemen Mayotte Yugoslavia South Africa Zambia Zaire Zimbabwe
Before using tile remote control for tile following operation; 1 Set the remote control mode selector 2 AUDIO. Press FM/AM.
AUDIO I-- l E_ FM/A dl_
Once a station quickly
to a channel
tuned in. You can preset
30 FM and 15 AM stations.
To preset the stations
below are used on pages 35 and
The buttons 36.
1 Tune in the station you want to preset.
If you want to store the FM reception mode t_r au FM station, select the reception mode you want. See "Selecting the FM reception mode". (See page 36.) Example: When the system is tuned in to 103.5 MHz.
The batteries Sunlight
are exhausted. on the remote sensor. source.
the batteries. sensor
(See page 6.) from direct sunlight.
is falling directly control
Hide the remote
The remote control does not work as expected,
mode is not for the desired
Before operation, press one of the source selecting buttons for the desired source. Set the selector to the correct position.
The position incorrect. No sound. The speaker
of the remote
cord is not connected. to AUX IN and/or
(See page 8.) (See page 10.)
The audio cord is not connected DIGITAL IN correctly. An incorrect The decode No picture is displayed source
the cord correctly.
has been selected.
Select the correct
(See page 14.) mode. (See page 30.)
mode is not set correctly. correctly.
Select the proper decode Connect the cord correctly.
The video cord is not connected The disc is not playable. The scan mode
(See page 9.)
on the TV screen. No picture is displayed the or the into
Use a playable though the Change 15.)
disc. (See page 3.) to "INTERLACE." (See page
is set to "PROGRESSIVE"
the scan mode
on the TV screen, picture is blurred, picture is divided two parts. No sound from the is
center unit is connected support the progressive
to the TV which does not video input.
on DVD AUDIO
of the disc.
speakers and "NO AUDIO" displayed window.
has been prohibited.
Video and audio are distorted.
The disc is scratched A VCR is connected TV. The monitor
or dirty. between the center unit and the
the disc. (See page 9.)
the center unit and TV directly.
The picture does not fit the TV screen. Hard to listen to broadcast noise. because of
type is not set correctly.
(See page 32.)
Reconnect page 7.)
MD 4688 FLS1003 Daytona Software CPC 6128 EH-TW5000 STR-DE535 PAB-3600 Nokia 1220 TE 2000 CFD-G700CP 96910 M4210C-BA VLS 107 RQ-CR07V GC2510 02 SA-970 F7310 Adsl2MUE JR Iden M100 XL Plus 7303 F TP-PS110U Coffee CDP-XE370 Lrtn22311TT AVR-485 VC-4351 Drive SHR-2042P250 1642-VLZ3 OT-332 PSC 221 AQ12nsan MPS-2500 PRO 7000 AJ3600-00C AG-DVX100 PRO 7500 DFM 3 Videostudio 8 155B8BV LDT321V AL1512 Kd-g730 Roomster HD50LPW175 1000 CL Roland KD-8 JBL G500 JVM205H Head WRT54GX 3000 Head Oregon 550T 14PT1686 58S T722I SX-400 Elan 110 CLP-130-CLP-120 66 AF CU515 PSR-K1 5800xpressmusic Cafamosacf250 94126 KDC-128 Samurai 2 Audi A8 DVD-V6700 NV-VS40 BX300F Elura 70 29FA12-AM Animal Invigorator KX-HCM10 DVD-HR734A GPS 155 MDX-M690 Mypal A600 LC32GD7E LMV2081SS TU 970 Price Yamaha RX-7 EOB98000X YDP-160 140 Env06 SDM-HS74P Treadmill 3210Z BMW 318 SC-7060 KX-TCA130EX 0 TH-50PV600E Yamaha F115 VDR-D220EP PT-47X54J Axis 210A
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101