Reviews & Opinions
Independent and trusted. Read before buy JVC XV-N33!



Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
JVC XV-N33 Dvd Player, size: 2.1 MB
Related manuals
JVC XVN330BUS-xv-n330 Instruction Manual
JVC XVN332SUS-xv-n332 Instruction Manual

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.


JVC XV-N33About JVC XV-N33
Here you can find all about JVC XV-N33 like manual and other informations. For example: review.

JVC XV-N33 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a JVC XV-N33 please write about it to help other people.


[ Report abuse or wrong photo | Share your JVC XV-N33 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
titom59310 3:49pm on Wednesday, October 6th, 2010 
Piece of CRAP! This is a very, very good DVD Player... by the time it was alive. I buyed this DVD Player, and at first it worked pretty well. Value for money I am really not a JVC fan, and this was my first JVC product. It is a medium market level product.
Mike from Milwaukee 6:27am on Monday, September 20th, 2010 
It about 2 years ago! JVC is a well known brand with a good reputation and it is covered under a warranty!

Comments posted on are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.




Variable speed playback..18
To advance or reverse playback rapidly while monitoring...18 To advance a still picture frame-by-frame..18 To playback in slow-motion..18
To locate the beginning of the scene or song..19
To locate a desired selection using 4 or.19 To locate a desired selection using the numeric buttons. 19
Limiting playback by children.. 53
To set Parental Lock for the first time [PARENTAL LOCK]..53 To change the settings [PARENTAL LOCK]..54 To temporarily release the Parental Lock [PARENTAL LOCK]..55
Other convenient functions..20
To check the playback status..20 To move back the playback position while DVD VIDEO playback [One touch replay function].21 To change the brightness of the display window..21

Page 56

Names of parts and controls.. 56
Page 22 Front panel....56 Display window...56 Rear panel...56 Remote control unit...57
Playing from a specific position on a disc..22
To locate a desired scene from the DVD menu.22 To locate a desired scene from the menu of the Video CD/SVCD with PBC...22 To specify a desired title...23 To locate a desired position in the current title or track [Time search]...23 To locate a desired scene from the display [DIGEST].24
AV COMPU LINK remote control system.. 58
Connection and setup..58 Operation...58
Changing the playback order..25
To playback in the desired order [Program playback].25 To playback in random order [Random playback].26

Repeat playback...27

Troubleshooting.. 59 Frequently Asked Questions.. 61 Specifications.. 62 Appendix A: Country code list for Parental Lock.. 63 Appendix B: Glossary.. 64 Appendix C: Index.. 66
Introduction Supplied accessories
Audio/video cable (Yellow/White/Red) (x 1) R6P(SUM-3)/AA(15F) battery (x 2)
Instruction manual (x 1) Component video cable (Red/Green/Blue) (x 1)
Remote Control Unit (x 1)

/ M E E P S O LO C


D N /O D Y V B D



T 5 V T



G N TI U M 10





O V L+


AC power cord (x 1) AC power plug adaptor (x 1) (for PX model only)






8J L 00 RO V T X ON -S E C M T R EMO
S500(J).book Page 3 Wednesday, February 13, 2002 9:26 AM

Notes on handling

Important cautions
Installation of the unit Select a place which is level, dry and neither too hot nor too cold (between 5oC and 35oC, 41oF and 95oF). Leave sufficient distance between the unit and the TV. Do not use the unit in a place subject to vibrations. Power cord Do not handle the power cord with wet hands! A small amount of power (1.3 W, for PX model:2.5W) is always consumed while the power cord is connected to the wall outlet. When unplugging the unit from the wall outlet, always pull the plug, not the power cord. To prevent malfunction of the unit There are no user-serviceable parts inside. If anything goes wrong, unplug the power cord and consult your dealer. Do not insert any metallic object into the unit. Do not use any non-standard shape disc available on the market, because it may damage the unit. Do not use a disc with tape, seals, or paste on it, because damage to the unit may result. Note about copyright laws Please check the copyright laws in your country before recording from DVD VIDEO, Audio CD, Video CD, SVCD, MP3 and JPEG discs. Recording of copyrighted material may infringe copyright laws. Note about the copyguard system The DVD VIDEO disc is protected by the copyguard system. When you connect the unit to your VCR (or integrated TV/Video system), the copyguard system activates and the picture may not be played back correctly.

1 Set the TV - DVD switch to "TV". 2 Hold down TV/VIDEO - CANCEL until step 4 is


3 Enter the manufacturer code of your TV listed below
by using the numeric buttons (0 through 9).
Selects the TV channels directly. * For some TVs, pressing "+10" functions as the "100+," while "10" functions as the ENTER button if your TV requires pressing the ENTER button after selecting a channel number. Mutes the TV sound. Changes the TV channels.
Example: To enter the manufacturer code "01": Press "0" then "1".
When the unit is shipped, the manufacturer code is set to "JVC" (01).

4 Press ENTER.

Manufacturer code list Manufacturer

Adjusts the TV volume.

17, 15, 38 01, 23, 24, 03


04, 11 34, 38, 39 10, 17, 05 12, 33, 34, 35 13, 08,14 09
If there is more than one code listed for the manufacturer of your TV, try them one by one until you succeed.
To control the volume of a JVC's amplifier or receiver
You can control the volume of a JVC's amplifier or receiver by using the AMP VOL +/ buttons on the remote control unit.
Pressing the + button raises the audio volume of the amplifier or receiver, while pressing the button lowers the volume.
S500(J).book Page 12 Wednesday, February 13, 2002 9:26 AM
In the following description, we assume that the buttons on the remote control unit are mainly used, however, you may use the corresponding buttons on the front panel if available. NOTE
Make sure that the TV - DVD switch on the remote control unit is set to "DVD" when using the 5//2/3 and numeric buttons for controlling the unit.

Before operation

Turning on/off the unit
Press DVD STANDBY/ON on the remote control unit or press STANDBY/ON on the front panel. The STANDBY indicator on the front panel, which illuminates in red during standby, goes off.


When the RESUME function is "ON" or "DISC RESUME" and the resume point is memorized, pressing 3 starts playback from that point instead of the beginning. See page 17. During playback, the display window shows the title/chapter or track number being played. During DVD VIDEO playback, pressing 3 moves back the playback position 10 seconds before the current position. See page 21 for details.
To stop playback completely

Press 7.

The unit stops playback.
If you press 0 OPEN/CLOSE during playback, the unit stops playback and opens the disc tray.
To stop playback temporarily

Press 8.

The unit pauses playback. To resume playback, press 3
When you make an operation, you may see the following icons displayed over the picture for about 3 seconds. These have the following meanings.
S500(J).book Page 16 Wednesday, February 13, 2002 9:26 AM

Resuming playback

The unit can memorizes the position on a disc where you interrupt playback, and resume playback from that position later. There are two resume modes (DISC RESUME and ON) you can set on the preference display. See page 52 for details about how to set the resume mode.
When purchasing the unit, the resume mode is initially set to "ON". You can deactivate the resume mode by setting "RESUME" on the "OTHERS" preference display to "OFF".

Disc tray

To memorize the interrupted position
Available : During playback
When the resume mode is set to "DISC RESUME" Press 7.
The unit stops playback and memorizes the interrupted position. After pressing 7, the display window on the front panel shows "----RESUME." In this condition, a memory of the interrupted position is not cleared if you press 0 OPEN/CLOSE to open the disc tray, or press STANDBY/ON (on the front panel) or DVD STANDBY/ON (on the remote control unit) to turn off the unit,
The position interrupted is also memorized by pressing 0 OPEN/CLOSE, STANDBY/ON (on the front panel) or DVD STANDBY/ ON (on the remote control unit). In this case, "----RESUME" is not shown on the display window. If you do not want the disc played to resume playback, press 7 while stopped. It memorizes positions for the last 30 discs. If you interrupt playback of a disc which you resumed playback, the memory is updated to store the new interrupted position. When the unit has already memorized positions for 30 discs, memorizing one more position for a disc automatically erases the oldest memory. On the other hand, if you interrupt playback of a disc which an interrupted position is already memorized, the order of memorized discs may change. In result, when memorizing a new data, the order of memorized discs to be erased also may change.

S500(J).book Page 20 Wednesday, February 13, 2002 9:26 AM
You can also specify the desired title during DVD VIDEO playback. See page 23 for details. During DVD VIDEO playback, if a menu is shown on the TV screen, the numeric buttons may be used for selecting an item in the menu. When appears on the TV screen: The title, chapter or track you have selected is not contained in the disc. This function does not work during Video CD/SVCD playback with PBC function (See pages 5 and 22.)
Other convenient functions
You can check the playback status, as well as change the brightness of the display window. Also, you can move back the playback position 10 seconds from the current position.


To check the playback status
Available : You can see the current selection number (the title/chapter number for DVD VIDEO or track number for Audio CD/Video CD/SVCD), time information (the track or chapter time while stopped, or the elapsed track or chapter time during playback) and the transport status (stop, playback, pause etc.) on the TV screen. During playback or while stopped


The playback status bar appears on the TV screen. (for DVD VIDEO)

Transfer rate


(for Video CD)

Current chapter number


Current transport status

TOTAL 1:25:58

TRACK 33 TIME 25:58
Current title number Current chapter time

Current track number

Disc elapsed time

(for Audio CD)

(for SVCD)
S500(J).book Page 21 Wednesday, February 13, 2002 9:26 AM
The indication on the rightmost of the status bar shows the unit's transport status as follows: Icon Status
Appears in the playback mode. Appears in the stop mode. Appears in the pause mode. Appears in the fast forward/backward playback mode. Appears in the slow-motion playback mode.
Note that pressing ON SCREEN again brings up the menu bar under the status bar, from which you can access various functions. (Example of the menu bar for DVD VIDEO)

8.5Mbps OFF CHAP.

1/3 1/5
See page 35 for details about the menu bar. NOTE
Press ON SCREEN until the status bar is dismissed.
To move back the playback position while DVD VIDEO playback [One touch replay function]
Available : During playback of a DVD VIDEO disc, you can move back the playback position 10 seconds from the current position. During DVD VIDEO playback


Total Program Time TrackDisc


S500(J).book Page 26 Wednesday, February 13, 2002 9:26 AM
4 Specify tracks in the desired order using the

numeric buttons.

To select a number between 1 and 10: Press the corresponding button for the number. To select a number higher than 10: Use the +10 button. Examples: To select 13: +To select 34: +10 +10 +To select 40: +10 +10 +Up to 99 tracks can be programmed. You may select the same track more than once. The total program time is shown at the right top of the program table. The total program time
To clear the program While stopped and the program table is shown on the TV screen, press 7. All the programmed tracks are erased. To exit the program mode After clearing all programmed tracks, press ON SCREEN. The program table is dismissed and the status bar appears on the TV screen. The PROGRAM indicator in the display window disappears and the unit quits program playback mode. NOTES
During program playback, you cannot edit the program contents. During program playback, pressing skip to the next selection of the program. Pressing 4 returns to the beginning of the current selection. To dismiss the program table: Press ON SCREEN. The program table is dismissed and the status bar is shown. To dismiss the menu bar (and the status bar): Press ON SCREEN.
Total Program Time TrackDisc 6


To playback in random order [Random playback]
Available : You can play tracks on a disc in random order by using the random function.
Selected track number If you specify a wrong track Use 5/ to move to the wrong track, then press TV/VIDEO - CANCEL. The track is erased and the subsequent programmed tracks move up. To clear the program while programming Press 7.
5 Press 3 to start program playback.
With a Video CD/SVCD disc, the program table is automatically dismissed when the program playback starts. With an Audio CD disc, the program table remains on the TV screen during program playback. However, pressing the ON SCREEN button brings up the status bar. When all of the programmed tracks have finished playback, the unit stops and the program table appears again. Note that the program remains. To check the program contents During playback, press 7. Playback stops and the program table is shown. When the unit is playing back an Audio CD and the program table is not shown, you can bring up the table by carrying out steps 1 through 3. During Video CD/SVCD playback, you cannot see the program table during playback. To quit program playback Press 7. Note that the program remains.
The menu bar appears on the TV screen. (See page 35 for details about menu bar)
S500(J).book Page 27 Wednesday, February 13, 2002 9:26 AM
The unit starts random playback. With a Video CD/SVCD disc, the menu bar is automatically dismissed. While random playback, the RANDOM indicator lights in the display window on the front panel. After playing all tracks of the disc, the unit stops the disc and quits the random mode.

You can hear the selected audio. The audio selection window is dismissed. NOTES
For DVD VIDEO, the selected language may be abbreviated on the TV screen. See "Table of languages and their abbreviations" on page 48. The Audio selection window will automatically disappear if you do not change the audio for several seconds. When disc): appears on the TV screen (for a DVD VIDEO
During playback (except when the status bar is shown)
You cannot select the audio. If only one audio sound is recorded, you cannot select the audio. You can also select the audio via the menu bar. See pages 36 and 38.

1 Press AUDIO.

The audio selection window appears on the TV screen.
2 Use AUDIO or 5/ to select the desired


Each time you press 5/ or AUDIO, the audio changes. See the following examples for audio selection. For DVD VIDEO Each time you press 5/ or AUDIO, the audio language or sound changes. Example:
S500(J).book Page 31 Wednesday, February 13, 2002 9:26 AM
To select a scene angle of DVD VIDEO [ANGLE]
Available : You can enjoy a variety of scene angles if the DVD VIDEO disc contains "multi-angle" parts, where multiple cameras were used to shoot the same scene from different angles.
You can see the picture from the selected angle. The angle selection window is dismissed.

From the angle list

During DVD VIDEO playback
1 Press and hold ANGLE for more than 1


Up to nine camera angles recorded on a disc appear on the TV screen.
At the beginning of a "multi-angle" part, appears on the TV screen (except when the "ON SCREEN GUIDE" preference is set to "OFF"). See page 52 for details about "ON SCREEN GUIDE" preference.
The selected camera angle


2 Use 5//2/3 to select the desired angle. 3 Press ENTER or 3 SELECT.
The unit starts playback by the selected angle on the full-sized screen. NOTES
The Angle selection window will automatically disappear if you do not change the angle for several seconds. When appears on the TV screen in step 1: The current scene is not recorded from multiple angles.

Repeat mode Select the repeat mode.
OFF j TRACK j ALL j A-B j OFF TRACK: Current track repeat ALL: A-B: All track repeat Repeats a desired part (A-B repeat)
Time search (Except during Video CD/SVCD playback with PBC) Specifies the elapsed time from the beginning of the disc, from which the unit starts playback.
1 Press ENTER to open the pull-down window. 2 Use numeric buttons to enter a desired time. 3 Press ENTER to playback from the specified time.
(See page 23 for details.)
This function cannot be used during program playback.
Program (While stopped only) Specifies the playback order of tracks.
1 Press ENTER to bring up the program table. 2 Specify tracks in the desired order using the numeric buttons. 3 Press 3 to start program playback.
(See page 25 for details.)
S500(J).book Page 38 Wednesday, February 13, 2002 9:26 AM
1 Press ENTER to activate random playback.
(See page 26 for details.)
Random (While stopped only) Activates random playback.
Audio selection (During Video CD/SVCD playback only) Selects the audio channel(s).
1 Press ENTER to open the pull-down window. 2 Use 5/ to select a desired audio channel(s). 3 Press ENTER to playback with the selected audio channel(s).
Subtitle selection (During SVCD playback only) Selects the subtitle.
1 Press ENTER to open the pull-down window. 2 Use 5/ to select a desired subtitle. 3 Press ENTER to playback with the selected subtitle.
S500(J).book Page 39 Wednesday, February 13, 2002 9:26 AM
The unit can play back MP3 files on a private CD-R/RW disc or commercial CD. We refer to a disc that contains MP3 file as an "MP3 disc" in this manual. Though available functions with MP3 discs are limited, operations for the available functions are similar to those with Audio CD discs. Note that, if a disc contains both of MP3 and JPEG files, you can only play back files of either type selected by the MP3/JPEG setting in the PICTURE preference display.(See page 50.)

NOTES for making a private MP3 disc using a CD-R/CD-RW disc:
Select "ISO 9660" as the disc format. Finalize the disc after completing recording. We recommend to record a material at 44.1-kHz Fs and at the 128-kbps data transfer rate.

English English English

The unit does not support "packet write" discs. The unit does not support the ID3 tag. If the disc is recorded with multiple sessions, the unit supports up to five sessions. Some discs may not be played back because of the disc characteristics or recording condition. The unit does not output a digital audio signal from DIGITAL OUT when playing back a MP3 disc. You cannot playback Tracks in the desired (programmed) or random order.

What is MP3?

"MP3" stands for "MPEG Audio Layer-3", and is the part of the MPEG standard. It can store high quality stereo audio using very little space by only saving the audible sounds and discarding the sounds your ears won't pick up. A CD can store up to around 10 hours of MP3 audio, which is 10 times as much as Audio CD. NOTE
The unit only can play back Tracks with any of the following file extensions; ".MP3", ".Mp3", ".mp3" and ".mP3". Time required for reading the disc contents differs with discs, depending on the numbers of Groups (folders) and Tracks (files) recorded, etc. While an MP3 disc is loaded, you cannot bring up any preference display. (See page 47.)

About MP3 disc

On an MP3 disc, each material (song) is recorded on a file. Files are sometimes grouped into a folder by artist, album, category, etc. In addition, a folder can be a member of another folder, creating hierarchical folder layers. If you are familiar with a personal computer, you may easily understand the hierarchical file/folder construction of MP3 discs. This unit simplifies the hierarchical construction of a disc and manages files and folders by "Tracks" and "Groups" in the following manners. Each file is regarded as a Track. A folder which has one or more files (Tracks) is regarded as a Group. A folders' folder which does not manage any file directly is ignored. Files which do not belong to any folder are grouped into "Group 1". The unit recognizes up to 150 Tracks per Group, and up to 99 Groups per disc. It ignores those exceeding the maximum numbers and cannot play back them. If there is any type of files other than MP3 files in a folder. those files are also counted down from the total number of 150.
Group 1 Group 2 up to 99 Groups per disc


Basic control buttons
The following table shows basic functions of basic control buttons. Buttons


Starts playback while stopped. Starts playback while stopped or paused. Stops playback. Pauses playback. Skips back or forward a Track in the Group* during playback. Selects the previous or next Track in the Group* while stopped.

Track 1

Group 1'
up to 150 Tracks per Group
*You can skip a Track across a Group. If you press 3 during playback, or press 7 to stop playback followed by 3, the unit starts playback from the beginning of the current track. The 2/3 buttons work the same as the 4/ button.
S500(J).book Page 40 Wednesday, February 13, 2002 9:26 AM
The current Group and Track number are shown on the display window in the following manner.
2 Move the bar to a desired Group using 5/.
On the right column, Tracks in the selected Group are shown. When selecting a Group, Track 1 is initially selected (highlighted).
3 Select a desired Track using 4/, then
Current track elapsed time

Current Group number

Current Track number
You cannot advance or reverse playback of an MP3 disc rapidly. You cannot see any other time information but the current track elapsed time.
press ENTER or 3. or Use the numeric buttons to directly specify a desired Track number.
To select a number between 1 and 10: Press the corresponding button for the number. To select a number higher than 10: Use the +10 button. Examples: To select 13: +To select 34: +10 +10 +To select 40: +10 +10 +The unit starts playback from the selected Track. In the MP3 CONTROL display and the display window on the front panel, you can see the current Group and Track numbers, as well as Track elapsed time. Current Track elapsed time
MP3 CONTROL Group : 01 / 10 spring sumer fall winter sea mountain camp picnic skiing flower Time : 00:03:08 Track : 01 / 06 (Total 28) begonia.mp3 german chamomile.mp3 kiwi fruit.mp3 orchard grass.mp3 petunia.mp3 north pole.mp3
Selecting the desired Group and Track
Available : When loading an MP3 disc, after the disc contents are read, the MP3 CONTROL display automatically appears on the TV screen.

To stop slide-show playback (to dismiss the picture) in the middle of the slide-show playback: Press 7 or MENU.
At the top-left of the screen, the information for the current magnification appears. While zoomed in, the indication for the zoomed-in position, which can be moved by operating the next step, appears together.
The TV screen returns to show the JPEG CONTROL display. Pressing 3 resumes slide show playback from the last picture you opened. To keep showing a current picture during the slide show Press 8 or ENTER. The picture does not change to the next picture. Pressing 3 resumes the slide show playback from the next picture. If a black screen appears continuously in the slide-show playback: The file currently played may be non-baseline JPEG file. In this case, select a playable file (a baseline JPEG file) again (e.g., pressing 7 or MENU to open the JPEG CONTROL display, etc.) Note that it may take a long time to select another file.
Even in the slide-show mode, you can zoom in or out a picture while paused (see the next column). To return to normal screen: Press ENTER. While zoomed, the picture may look coarse.
S500(J).book Page 45 Wednesday, February 13, 2002 9:26 AM
Selecting the start point of the slide show
"--" is shown in the Group display area of the display window. (Example for the indication of display window)
Numeric buttons TITLE/GROUP

Group display area

To select a number between 1 and 10: Press the corresponding button for the number. To select a number higher than 10: Use the +10 button. Examples: To select 13: +To select 34: +10 +10 +To select 40: +10 +10 +Specify the Group number within several seconds after pressing TITLE/GROUP (i.e. while the display window shows "--" for the Group number, instead of the current Group number).
From the JPEG CONTROL display
During JPEG CONTROL display is shown
You can specify the Track number according to the order in the JPEG CONTROL display. You must specify a Track number within 5 seconds after carrying out step 2. The unit starts slide show playback from the specified Track. If you do not specify a Track number, the unit starts slide show playback from the first Track in the Group.
You can skip a file in the slide show by using 4/ or 5/.

S500(J).book Page 49 Wednesday, February 13, 2002 9:26 AM


This page allows you to select desired options concerning with a picture or monitor screen.
16:9 NORMAL (Wide Television MONITOR TYPE screen) You can select the monitor type to match your TV when you playback Should be selected when you DVD VIDEO discs recorded for wide connect the unit to a wide-screen screen televisions. (16:9) TV whose aspect ratio is fixed to 16:9 (the unit automatically adjusts the screen width of the output signal correctly when If you playback a "4:3" DVD VIDEO playing back a "4:3" source). source with the "16:9 NORMAL" mode, the picture character slightly 16:9 AUTO (Wide Television screen) changes due to the process for Should be selected when you converting the picture width. connect a wide-screen (16:9) TV to the unit. 4:3 LB. (Letter Box Conversion) Should be selected when you connect a normal (4:3) TV to the unit. When playing back a DVD VIDEO disc recorded by the wide picture format, the picture is shown with black bars at the top and bottom. 4:3 PS. (Pan Scan Conversion) Should be selected when you connect a normal(4:3) TV to the unit. When playing back a DVD VIDEO disc recorded by the wide picture format, the picture is automatically zoomed and the left and right sides are chopped off.
VIDEO PROGRESSIVE MODE When the unit is in the progressive Suitable for playing back a video scan mode, you can select a desired source disc. mode from three options. FILM Normally, set to "AUTO". Suitable for playing back a film or progressive source disc. AUTO Used to playback a disc containing both video and film source materials. The unit recognizes the picture type (film or video source) of the current disc according to the disc information.
When progressive scan mode is active, the PROGRESSIVE indicator is lit. Note that the color of indication changes depending on this setting, source type and the units status. (See pages 7 and 8.) Some DVD VIDEO discs may not be played back correctly with the "AUTO" mode. If the playback picture is unclear or noisy with a particular DVD VIDEO disc, try to change the mode
With some discs recorded by the wide picture format, the picture is shown in the 4:3 LB mode even if you select the 4:3 PS mode.
S500(J).book Page 50 Wednesday, February 13, 2002 9:26 AM
SCREEN SAVER ON You can select the screen saver The current picture gets dark. function ON or OFF. See page 15 for details about screen OFF The screen saver function is off. saver function. When a disc contains either MP3 or MP3/JPEG MP3 JPEG files, the unit can play back the The unit can playback MP3 and MP3 files can be played back if a disc JPEG files recorded on a CD-R/CDcontains both of MP3 and JPEG files. files regardless of the setting. RW disc, however, if a disc contains both of MP3 and JPEG files, you can JPEG JPEG files can be played back if a disc only playback files of either type contains both of MP3 and JPEG files. selected by this menu item.

Dynamic range:

Wow and flutter: Total harmonic distortion:
S500(J).book Page 63 Wednesday, February 13, 2002 9:26 AM
Appendix A: Country code list for Parental Lock
This list is used for the Parental Lock operation. For details, see page 53.
AD AE AF AG AI AL AM AN AO AQ AR AS AT AU AW AZ BA BB BD BE BF BG BH BI BJ BM BN BO BR BS BT BV BW BY BZ CA CC CF Andorra United Arab Emirates Afghanistan Antigua and Barbuda Anguilla Albania Armenia Netherlands Antilles Angola Antarctica Argentina American Samoa Austria Australia Aruba Azerbaijan Bosnia and Herzegovina Barbados Bangladesh Belgium Burkina Faso Bulgaria Bahrain Burundi Benin Bermuda Brunei Darussalam Bolivia Brazil Bahamas Bhutan Bouvet Island Botswana Belarus Belize Canada Cocos (Keeling) Islands Central African Republic CG Congo CH Switzerland CI C te d'Ivoire CK Cook Islands CL Chile CM Cameroon CN China CO Colombia CR Costa Rica CU Cuba CV Cape Verde CX Christmas Island CY Cyprus CZ Czech Republic DE Germany DJ Djibouti DK Denmark DM Dominica DO Dominican Republic DZ Algeria EC Ecuador EE Estonia EG Egypt EH Western Sahara ER Eritrea ES ET FI FJ FK FM FO FR FX GA GB GD GE GF GH GI GL GM GN GP GQ GR GS GT GU GW GY HK HM HN HR HT HU ID IE IL IN IO IQ IR IS IT JM JO JP KE KG KH KI KM KN KP KR KW KY KZ LA Spain Ethiopia Finland Fiji Falkland Islands Micronesia (Federated States of) Faroe Islands France France, Metropolitan Gabon United Kingdom Grenada Georgia French Guiana Ghana Gibraltar Greenland Gambia Guinea Guadeloupe Equatorial Guinea Greece South Georgia and the South Sandwich Guatemala Guam Guinea-Bissau Guyana Hong Kong Heard Island and McDonald Islands Honduras Croatia Haiti Hungary Indonesia Ireland Israel India British Indian Ocean Territory Iraq Iran (Islamic Republic of) Iceland Italy Jamaica Jordan Japan Kenya Kyrgyzstan Cambodia Kiribati Comoros Saint Kitts and Nevis Korea, Democratic People's Republic of Korea, Republic of Kuwait Cayman Islands Kazakhstan Lao People's Democratic Republic LB LC LI LK LR LS LT LU LV LY MA MC MD MG MH ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ NA NC NE NF NG NI NL NO NP NR NU NZ OM PA PE PF PG PH PK PL PM PN PR PT PW PY QA RE RO RU RW Lebanon Saint Lucia Liechtenstein Sri Lanka Liberia Lesotho Lithuania Luxembourg Latvia Libyan Arab Morocco Monaco Moldova, Republic of Madagascar Marshall Islands Mali Myanmar Mongolia Macau Northern Mariana Islands Martinique Mauritania Montserrat Malta Mauritius Maldives Malawi Mexico Malaysia Mozambique Namibia New Caledonia Niger Norfolk Island Nigeria Nicaragua Netherlands Norway Nepal Nauru Niue New Zealand Oman Panama Peru French Polynesia Papua New Guinea Philippines Pakistan Poland Saint Pierre and Miquelon Pitcairn Puerto Rico Portugal Palau Paraguay Qatar Runion Romania Russian Federation Rwanda SA SB SC SD SE SG SH SI SJ SK SL SM SN SO SR ST SV SY SZ TC TD TF TG TH TJ TK TM TN TO TP TR TT TV TW TZ UA UG UM US UY UZ VA VC VE VG VI VN VU WF WS YE YT YU ZA ZM ZR ZW Saudi Arabia Solomon Islands Seychelles Sudan Sweden Singapore Saint Helena Slovenia Svalbard and Jan Mayen Slovakia Sierra Leone San Marino Senegal Somalia Suriname Sao Tome and Principe El Salvador Syrian Arab Republic Swaziland Turks and Caicos Islands Chad French Southern Territories Togo Thailand Tajikistan Tokelau Turkmenistan Tunisia Tonga East Timor Turkey Trinidad and Tobago Tuvalu Taiwan Tanzania, United Republic of Ukraine Uganda United States Minor Outlying Islands United States Uruguay Uzbekistan Vatican City State (Holy See) Saint Vincent and the Grenadines Venezuela Virgin Islands (British) Virgin Islands (U.S.) Vietnam Vanuatu Wallis and Futuna Islands Samoa Yemen Mayotte Yugoslavia South Africa Zambia Zaire Zimbabwe

S500(J).book Page 66 Wednesday, February 13, 2002 9:26 AM

Appendix C: Index

3D PHONIC... 34, 51 480i... 6, 7 60, 62 , 480p... , Menu bar. 21, 23, 24, 25, 26, 27 28, 29, 30, 31, 35, 36, 37 , Menu language... 48 Monitor type.. 13, 49, 60 MP3.. 4, 39, 40, 41, 42, 50 MP3 CONTROL... 40, 41, 48 MP3 disc... 3, 17 39, 47 , MPEG... 13, 39, 50 Multi-angle part.. 31, 37 Multiple session.. 39, 42
A-B repeat... 28, 36, 37 Angle... 15, 17 29, 31, 37 , Audio language...15, 29, 30, 36, 48 Auto standby... 52 AV COMPU LINK.. 7 8, 9, 52, 58 , AV COMPULINK mode.. 52

NTSC... 4, ,

Chapter.. 5, 19, 20, 21, 24, 25, 27 28, 36 , Chapter search... 36 Component video.. 2, 7 58, 62 , Copyguard system... 3 Copy-protected disc... 6 Country code... 53, 55, 63
One touch replay function.. 21 On-screen guide.. 15, 52 On-screen language.. 13, 48 Opening display..12, 13, 14
Packet write... 39, 42 PAL... 4 Pan scan... 49 Parental lock.. 52, 53, 54, 55, 63 Playback control (PBC). 5, 17 19, 20, 22, 23, 24, , , Preference. 7 8, 9, 13, 15, 16, 17 29, 30, 31, 33, , , 39, 42, 47 48, 53, 54, 55, 58, 60 , Program (playback).. 24, 25, 26, 28, 37 Progressive mode.. 7 8, 49, 60 , Progressive scan.. 7 8, 33, 49, 60, 62 ,
D. range compression.. 9, 51 Digest... 24, 25 Digital audio output..4, 9, 13, 50 Direct selection... 41 Disc resume... 15, 16, , Dolby.... 3, 58 Dolby Digital..4, 9, 13, 34, 50, 51, 58, 62 Down mix... 7 8, 51 , DTS...3, 4, 9, 13, 50, 62 DVD menu.... 22 DVD PLAYER SET UP...13
Random (playback).. 26, , Region code...4, 12, 14 Repeat (playback)..27 28, 36, 37 41, 46 , , Resume (playback).. 15, 16, ,

Extension... 39, 42

Finalize... 4, 39, 42
Sampling rate... 4 Scan mode... 6, 7 8, 49, 60 , Screen saver.. 15, 42, 50 Slide show... 44, 45 Slide show mode.. 44, 46 Slide show playback.. 44, 45 Slow-motion...15, 18, 21 Status bar.. 20, 21, 26, 29, 30, 31, 35, 36, 37 Strobe (playback)... 32 Subtitle language.. 15, 29, 36 S-video... 6, 7 58, 60, 62 ,
Group.. 39, 40, 41, 42, 43, 45, 46
ID3 tag... 39 Initial setting...13, 47 Initial setup....13 Interlace scan... , ISO 9660... 39, 42 Additional information
JPEG.. 4, 39, 42, 43, 46, 48, 50 JPEG CONTROL.. 43, 44, 45, 46 JPEG disc.. 3, 17 42, 43, 44, 47 ,
Time search.. 23, 24, 36, 37 Transfer rate... 20, 39 Transport status.. 20, 21
Language code... 48 Linear PCM... 4, 50, 60
VFP (Video fine prosessor)... 8, 33, 60




XV-N370B XV-N372S

For Customer Use :

Enter below the Model No. and Serial No. which are located on the rear of cabinet. Retain this information for future reference. Model No. Serial No.

LVT1874-001A [J]

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS. WARNING: Do not install this equipment in a confined space such as a bookcase or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION concerning the Power Cord Most devices are recommended be placed on a dedicated circuit; That is, a single outlet circuit which powers only that electronic device and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owners manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNERS MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing. This product does not contain any parts that can be repaired by the user. DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety, operating and use instructions should be retained for future reference. 3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to. 4. Follow all instructions. - All operating and use instructions should be followed. 5. Do not use this apparatus near water. - For example: near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement; or near a swimming pool; and other areas located near water. 6. Clean only with dry cloth. - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over- heating. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with apparatus. When a cart is used, use caution when moving the cart/product combination to avoid injury from tip-over. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer.

About the

Symbol Display
Symbol Used in this Manual
Note: Indicates special notes and operating features. Tip: Indicates tips and hints for making the task easier. A section whose title has one of the following symbols is applicable only to the disc represented by the symbol.


After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.
All discs and file listed below Video CDs Audio CDs MP3 files WMA files Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.


DVD and finalized DVDR/RW

Installation and Setup

may appear on your TV display during operation and indicates that the function explained in this owners manual is not available on that specific DVD video disc.

Storing Discs

To ensure proper use of this product, please read this owners manual carefully and retain it for future reference.

Notes on Discs

Types of Playable Discs
DVD (8 cm / 12 cm disc) Video CD (VCD/SVCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc)

Regional Code

This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled as the same as the rear of the unit or ALL. Notes on Regional Codes Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your units regional code or the disc cannot play. If you try to play a DVD with a different regional code from your player, the message Check Regional Code appears on the TV screen. Notes on Copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. The Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

In addition, this unit plays DVDR/RW and CD-R/RW, Dual disc that contains audio titles, MP3, WMA, and/or JPEG files. This indicates a product feature that is capable of playing DVD-RW discs recorded with Video Recording format. Notes: Depending on the conditions of the recording equipment or the CD-R/RW (or DVDR/RW) disc itself, some CD-R/RW (or DVDR/RW) discs may not be played on the unit. Do not use irregularly shaped CDs (e.g., heartshaped or octagonal) since they may result in malfunctions. This DVD player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.

Front Panel

a 1/' STANDBY/ON Switches the unit ON and OFF. b Disc Tray Insert a disc here. c Z (OPEN/CLOSE) Opens or closes the disc tray. d Display window Shows the current status of the unit. e Remote Sensor Point the remote control here.
f N (PLAY) Starts playback. g x (STOP) Stops playback. h. (SKIP) Returns to the beginning of current chapter or track or go to the previous chapter or track. Press and hold the button for search backward. i > (SKIP) Go to the next chapter or track. Press and hold the button for search forward.

Remote Control

STANDBY/ON (1/') Switches DVD Player ON and OFF. OPEN/CLOSE (Z) Opens and closes the disc tray. DISPLAY Accesses On-Screen Display. DVD MENU Accesses menu on a DVD disc. b / B / v / V (left/right/up/down) Selects an item in the menu. PAUSE/STEP ( X ) Pauses playback temporarily/ press repeatedly for frame-by-frame playback. SKIP (. / >) Go to next chapter or track. Returns to the beginning of current chapter or track or go to the previous chapter or track. STOP (x) Stops playback. SCAN (m / M) Search backward or forward. PLAY (N) Starts playback. 0-9 numerical buttons Selects numbered items in a menu. PROGRAM Enter to program edit mode. CLEAR Removes a track number on the Program List or a mark on the Marker Search menu. AUDIO ( ) Selects an audio language or an audio channel. SUBTITLE ( ) Selects a subtitle language. ANGLE ( ) Selects a DVD camera angle, if available. ZOOM Enlarges video image. MARKER Marks any point during playback. SEARCH Displays MARKER SEARCH menu. TITLE Displays title menu, if available. REPEAT Repeats chapter, track, title or all. Remote Control operation Point the remote control at the remote sensor and press the buttons. Cautions: Do not mix old and new batteries and never mix different types of batteries such as standard, alkaline, etc. Do not put the batteries in the place where young children can reach. Remote Control Battery installation Detach the battery cover on the rear of the remote control, and insert two batteries (size AAA) with 3 and # aligned correctly.


ENTER ( ) Confirms menu selection. SETUP Accesses or removes Setup menu. RETURN (O) Displays the menu of a video CD with PBC.
RANDOM Plays tracks in random order. A-B Repeats sequence from point A to point B.
The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. If this occurs, position the player away from the TV, VCR, or radio, or turn off the unit after removing the disc. Make one of the following connections, depending on the capabilities of your TV. Cautions: Do not connect the S-VIDEO OUTPUT and COMPONENT VIDEO OUTPUT jacks together to your TV, otherwise the color of video image will not be displayed properly. Make sure the DVD player is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the copy protection system. S-Video Connect the S-VIDEO OUTPUT jack on the DVD Player to the S-Video in jack on the TV using the S-Video cable (S). Caution: You must set the [TV Output Select] option to [S-VIDEO] on the setup menu to use this connection. (See page 12.) Video Connect the VIDEO OUTPUT jack on the DVD player to the video in jack on the TV using the video cable (V). Audio Connect the left and right AUDIO OUTPUT jacks of the DVD Player to the audio left and right IN jacks on the TV using the audio cables (A). Do not connect the DVD Players AUDIO OUTPUT jack to the phone in jack (record deck) of your audio system. Component Video Connect the COMPONENT / PROGRESSIVE SCAN OUTPUT jacks on the DVD Player to the corresponding jacks on the TV using an Y PB PR cable (C). Caution: You must set the [TV Output Select] option to [YPbPr] on the setup menu to use this connection. (See page 12.) Progressive Scan If your television is a high-definition or digital ready television, you may take advantage of the DVD players progressive scan output for the highest possible video resolution. Set the Progressive Scan to On on the setup menu for progressive scan signal. (Refer to page 12). Progressive scan does not work with the analog video connections (yellow VIDEO OUTPUT jack and S-VIDEO OUTPUT jack).

DVD Player Connections

Depending on your TV and other equipment there are various ways you can connect the player. Please refer to the manuals of your TV, stereo system or other devices as necessary for additional connection information.

Rear of TV

Rear of DVD Player

Setting up the Player

Video and Audio Connections to Your TV
Audio Connection to Optional Equipment
Connect the DVD player to your optional equipment for audio output. Rear of DVD Player
Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic ll / Pro Logic: Connect the left and right AUDIO OUTPUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo system, using the audio cables (A). Amplifier equipped with 2-channel digital stereo (PCM) or audio / video receiver equipped with a multi-channel decoder (Dolby Digital, MPEG 2, or DTS): Connect one of the DVD Players DIGITAL AUDIO OUTPUT jacks (COAXIAL X) to the corresponding jack on your amplifier. Use an optional digital (COAXIAL X) audio cable. Digital Multi-channel sound A digital multi-channel connection provides the best sound quality. For this you need a multi-channel audio / video receiver that supports one or more of the audio formats supported by your DVD player such as MPEG 2, Dolby Digital and DTS. Check the receiver manual and the logos on the front of the receiver. Notes:
If the audio format of the digital output does not

Amplifier (Receiver)

match the capabilities of your receiver, the receiver produces a strong, distorted sound or no sound at all. Six Channel Digital Surround Sound via a digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. 1996-2007 DTS, Inc. All Rights Reserved.
When you turn on for the first time
The menu for a language selection will appear when you turn on the unit for the first time. You must select a language to use the unit. Use b / B / v / V to select a language then press ENTER and the confirm menu will appear. Use b / B to select [Enter] then press ENTER.

Initial Settings

By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 12 to 13. To display and exit the Menu: Press SETUP to display the menu. A second press of SETUP will take you back to initial screen. To go to the next level: Press B on the remote control. To go back to the previous level: Press b on the remote control.
Displaying Disc Information on-screen
You can display various information about the disc loaded on-screen. 1. Press DISPLAY to show various playback information. The displayed items differ depending on the disc type or playing status.

General Operation

1. Press SETUP. The Setup menu appears.
2. You can select an item by pressing v / V and change or select the setting by pressing b / B. Title (Track) Current title (or track). number/total number of titles (or tracks). Chapter Current chapter number/total number of chapters. Time Elapsed playing time. Audio Selected audio language or channel. Subtitle Selected subtitle. Angle Selected angle/total number of angles. Note: If any button is not pressed for a few seconds, the onscreen display disappears.
2. Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s).
4. Use v / V to select the desired setting then press ENTER to confirm your selection. Some items require additional steps. 5. Press SETUP or PLAY (N) to exit the Setup menu.
3. Use v / V to select the second desired option and then press B to move to the third level.


Display Mode The Display Mode setting works only when the TV Aspect mode is set to 4:3. Letterbox Displays a wide picture with bands on the upper and lower portions of the screen. Panscan Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. Progressive Scan Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or a monitor that is compatible with a progressive scan signal, set Progressive Scan to On. To Turn ON progressive scan: Connect component video out of this unit to the input of your TV or monitor, set your TV or monitor to Component Input. 1. Select Progressive Scan on the DISPLAY menu then press B. 2. Select On using the v / V buttons. 3. Press ENTER to confirm your selection. The confirm menu will appear. 4. When the confirm menu appears on your screen Cancel is highlighted as default. Use the b / B buttons to highlight Enter. 5. Pressing ENTER will set the player to Progressive scan mode.

Menu Language Select a language for the Setup menu and then on-screen display. Disc Audio / Subtitle / Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. Original Refers to the original language in which the disc was recorded. Other To select another language, press numeric buttons and then ENTER to enter the corresponding 4-digit number according to the language code list on the page 21. If you enter the wrong language code, press CLEAR. Off (for Disc Subtitle) Turn off Subtitle.


TV Output Select Set the players TV Output Select options according to the TV connection type. S-VIDEO When your TV is connected with the S-VIDEO OUTPUT jack. YPbPr When your TV is connected with the COMPONENT / PROGRESSIVE SCAN OUTPUT jacks on the DVD player.
TV Aspect 4:3 Select when a standard 4:3 TV is connected. 16:9 Select when a 16:9 wide TV is connected.
Each DVD disc has a variety of audio output options. Set the players AUDIO options according to the type of audio system you use.
DRC (Dynamic Range Control) With the DVD format, you can hear a programs soundtrack in the most accurate and realistic presentation. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect. Vocal Set to On only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc mix into normal stereo sound.
Dolby Digital / DTS / MPEG Bitstream Select Bitstream if you connect this units DIGITAL OUTPUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. PCM (for Dolby Digital / MPEG) Select when connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital, MPEG will be automatically downmixed to two-channel PCM audio. Off (for DTS) If you select Off, the DTS signal is not output through the DIGITAL OUTPUT jack. Sample Freq. (Frequency) If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice is made, this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them. If your receiver or amplifier is capable of handling 96 kHz signals, select 96 kHz. Check the documentation for your amplifier to verify its capabilities.


PBC Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played in the same way as Audio CDs. B.L.E. (Black Level Expansion) To select the black level of playback pictures. Set your preference and monitors ability. On: Expanded grey scale. (0 IRE cut off) Off: Standard grey scale. (7.5 IRE cut off)

Programmed Playback

The program function enables you to store your favorite tracks from any disc in the player memory. A program can contain 30 tracks. 1. Insert an Audio CD or MP3/WMA files recorded media. AUDIO CD or MUSIC menu appears. 2. Press PROGRAM and the
Repeat Programmed Tracks Press REPEAT to select a desired repeat mode. Track: Repeats the current track. All: Repeats all the tracks on programmed list. Off(No display): Does not play repeatedly. Note: If you press SKIP (>) once during Repeat Track playback, the repeat playback cancels. Erasing a Track from Program List 1. During stop mode, press PROGRAM and the mark will appear

mark will appear.

Note: Press PROGRAM again to exit the program edit mode, then the

mark will disappear.

3. Select a track on the List and then press ENTER to place the selected track on the Program list. Repeat to place additional tracks on the list. 4. Use b / B / v / V to select the track you want to start playing on the Program list. 5. Press PLAY (N) or ENTER to start. Playback begins in the order in which you programmed the tracks. Playback stops after the last track on the Program list have played. 6. To resume normal playback from programmed playback, select a track on the list and then press PLAY (N).
2. Use b / B / v / V to select the track that you wish to erase from the Program list. 3. Press CLEAR. Repeat step 1-3 to erase additional tracks on the list. Erasing the Complete Program List 1. During stop mode, press PROGRAM and the mark will appear
2. Use b / B / v / V to select Clear All and then press ENTER. Note: The programs are also cleared when the power is off or the disc is removed.

Viewing a JPEG file

This unit can play JPEG files. 1. Insert a JPEG files recording media. The PHOTO menu appears on the TV screen.
Moving to another file Press SKIP (. or >) or cursor (b or B) once during viewing a picture to advance to the next or previous file. Zoom During watching pictures, press ZOOM to enlarge the video image (3 steps). You can move through the zoomed picture using b / B / v / V buttons.
Rotating the picture Press v / V during showing a picture to rotate the picture clockwise or counter clockwise. Listening to MP3 music while watching picture 2. Press v / V to select a folder, and press ENTER. A list of files in the folder appears. 3. If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY (N). 4. To return to the PHOTO menu while watching pictures, press STOP (x). Tips: If you are in a file list and want to return to the previous Folder list, use v / V buttons to highlight and press ENTER. Press DVD MENU to move to the next page. There are three Slide Speed options: >>> (Fast), >> (Normal) and > (Slow). Use b / B / v / V to highlight. Then, use b / B to select the option you want to use. On a DISC with MP3/WMA and JPEG file, you can switch MUSIC and PHOTO menu. Press TITLE, and MUSIC or PHOTO word on top of the menu is highlighted. While watching a picture, press RETURN (O) to hide the help menu. Slide Show Use b / B / v / V to highlight the then press ENTER. Still Picture 1. Press PAUSE/STEP (X) during slide show. The player will now go into pause mode. 2. To return to the slide show, press PLAY (N) or press PAUSE/STEP (X) again. (Slide Show) 1. Insert the disc containing the two types of file in the player. 2. Press TITLE to display the PHOTO menu. 3. Press v / V to select a photo file. 4. Use B to select Playback starts. icon then press ENTER.

5. To return to the PHOTO menu while watching pictures, press STOP (x). Tip: To listen to only the desired music while watching picture, program the desired files from the MUSIC menu and then proceed as above.
JPEG disc compatibility with this player is limited as follows: Photo size: Less than 2 MB recommended Depending upon the size and the number of JPEG files, it could take a long time for the DVD player to read the discs contents. If you do not see an on-screen display after several minutes, some of the files may be too large reduce the resolution of the JPEG files to less than 5 million pixels and burn another disc. The total number of files in a disc should be less than 650 files. Some discs may be incompatible due to a different recording format or the condition of disc. Ensure that all the selected files have the.jpg extensions when copying into the CD layout. CD-R/RW, DVDR/RW Format: ISO 9660 If the files have.jpe or.jpeg extensions, please rename them as.jpg file. File names without.jpg extension will not be able to be read by this unit. Even though the files are shown as JPEG image files in Windows Explorer.
Playing a DVD VR format Disc
This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray. The DVD-VR menu appears on the TV screen
2. Press v / V to select a title then press PLAY (N) or ENTER and playback starts. 3. Press DVD MENU to move to the list menu. Notes:
The slow motion function is not available. This unit will play DVD-R/RW disc that is recorded
using the DVD-Video format that have been finalized using a DVD-recorder. Unfinalized DVDR/RW discs cannot be played in this player.
Some DVD-VR disc are made with CPRM data by
What is CPRM? CPRM is a copy protection system (with scramble system) only allowing the recording of copy once broadcast programs. CPRM stands for Content Protection for Recordable Media.
DVD RECORDER. Player does not support these kinds of discs.

Remote Control Function

Remote Control C1/C2/C3 Code Switching This unit is initially set to C3 code (JVC DVD PLAYER code). You can easily change the Remote Control code to C1 (JVC VCR code), C2 (JVC DVD RECORDER code) or C3 as shown below.

Note: If you change the batteries of the Remote Control with C1 or C2 code, the remote control code is set to C3 automatically. In this case, you should reset the remote control code described above.


Maintenance and Service
Refer to the information in this chapter before contacting a service technician.

Handling the Unit

When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.
Keeping the exterior surfaces clean Do not use volatile liquids such as insecticide spray near the unit. Do not leave rubber or plastic products in contact with the unit for a long period of time. since they leave marks on the surface. Cleaning the unit To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution.
Keep pressing ENTER down during step 1.
1. Press the number Key 1 for C1, 2 for C2 or 3 for C3 to change the remote control code. 2. Press STANDBY/ON (1/\) to turn on the unit. 3. Press x on the unit for over 5 seconds while the unit is turned on. The code currently set appears on the front display panel. 4. Press ENTER on the remote control to change the unit's code. The code currently set on the remote control is displayed on the front display panel for approximately 5 seconds, and is applied to the unit.
Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. Maintaining the Unit The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of use. For details, please contact your nearest authorized service center.

Language Codes

Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language Abkhazian Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali; Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faroese Code 7079 Language Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Japanese Javanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Code 7686 Language Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maltese Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Quechua Code 8185 Language Singhalese Slovak Slovenian Somali Spanish Sudanese Swahili Swedish Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapk Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 9085

Rhaeto-Romance 8277 Rumanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi 8368


Symptom No power. The power is on, but the DVD player does not work. No picture. Possible Cause The power cord is disconnected. No disc is inserted. Correction Plug the power cord into the wall outlet securely. Insert a disc. (Check the disc indicator in the display window is lit.) Select the appropriate video input mode on the TV. Connect the video cable securely. Set the [TV Output Select] option to the correct position on the setup menu regarding to the current video connection. (See page 12.) Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player. Turn on the equipment connected with the audio cable. Set the AUDIO option to the correct position, then turn on the DVD player again by pressing STANDBY/ON. Insert a playable disc. (Check the disc type and regional code.) Point the remote control at the remote sensor of the DVD player. Operate the remote control closer to the DVD player. Identify the remote control code with the code of unit. (See page 20).
The TV is not set to receive DVD signal output. The video cable is not connected securely. The [TV Output Select] options is set to the wrong position on the setup menu for the S-VIDEO or COMPONENT VIDEO connection,

No sound.

The equipment connected with the audio cable is not set to receive DVD signal output. The power of the equipment connected with the audio cable is turned off. The AUDIO options are set to the wrong position. An unplayable disc is inserted.
The DVD player does not start playback.
The remote control is not pointed at The remote control the remote sensor on the DVD player. does not work properly. The remote control is too far from the DVD player. The current remote control code does not match the unit.


Power requirements: Power consumption: Dimensions (Approx.): Net weight (Approx.): Operating temperature: Operating humidity: AC 120 V, 60 Hz 8W 430 x 39 x 192 mm (17 x 1.5 x 7.6 inches) (W x H x D) without foot 1.5 kg (3.3 lbs) 5 C to 35 C (41 F to 95 F) 5 % to 90 %


VIDEO OUTPUT: S-VIDEO OUTPUT: COMPONENT VIDEO OUTPUT: AUDIO OUTPUT: DIGITAL OUTPUT (COAXIAL): 1.0 V (p-p), 75 , sync negative, RCA jack x 1 (Y) 1.0 V (p-p), 75 , negative sync, Mini DIN 4-pin x 1 (C) 0.3 V (p-p) 75 (Y) 1.0 V (p-p), 75 ,negative sync, RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 , RCA jack x 2 2.0 Vrms (1 KHz, 0 dB), 600 , RCA jack (L, R) x 1 0.5 V (p-p), 75 , RCA jack x 1



GT-S3600I ZDS104 DGS-3100-24 DVC9800 GTL DX PDR-9750 RE-29FA33PX MC-CL671 Hx2110 M740 AV Dopod D600 RL41ecps Mexico PRO El52200 MCB780W GM-X404 P1610 13N-M100 SU-A600 R6640 Poussette 1000 S HR-V610E 17000 D-copia 45 P-7000 Citation 16A SF-150T DV-420V-K LN40R81B CD-290DJ 29PT9008 FA-124 AF-S85NX Moottorisaha XV-N30 DB455MC PL-42P5H SH09AWH KVM-104 MS-2042G 12 5X Center E-TEN G500 Benq Z2 EWI4000S VC920 PW-LT220 DA3000R TX-SV313PRO 71-101 Audi Plus WF-T1051TP VCL-ECU1 BDV-E870 Review HL-5030 KX-TCD200FX Xtream Z3340 Cs 650 Tower Autopilot Kronys 500Y AR-P17 DPL950VD Manual Casio 4334 700 Trio CD880 02R96V2 Cafamosa SR-T 303 M1000 RDV-1 - 2003 Latitude C610 Printer 300 SGH-E870 20LD2400 5005319A OBY-5 F50777S Minox GT-S 32-3820 Humminbird 717 A7M266D CFD-S35CP EL733A Fd5RU Software VGN-NR21j S EL-5120 1630 I KLV-32S530A Audi S3 CDX-C910 NS-SW210 Software Grandam 2002 328 GTB


manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101