English Nederlands Franais Deutsch Italiano Portugus Espaol
2-5 6-- - - - - - - - - - - - - - - - 27

UN FO LD

Dansk Svenska Norsk Suomi Trke esky Magyar Polski Ekkgmij

CL630 series

Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK www.kenwoodworld.com 57813/1

English

before using your Kenwood appliance Read these instructions carefully and retain for future reference. Remove all packaging and any labels.

safety

G G G G
Switch off and unplug: G before fitting and removing parts G after use G before cleaning. Never immerse the base/paddle assembly or allow its underside to get wet. Dry thoroughly before use. Do not overfill as hot liquid may splash out during the blending operation. Never let the power unit, cord or plug get wet. Keep hands and utensils out of the goblet when its on the power unit. Never use a damaged appliance. Get it checked or repaired : see service. Never use an unauthorised attachment. Never leave the appliance on unattended. When removing the goblet from the power unit, wait until the paddle has completely stopped. Do not operate the appliance whilst the goblet is empty. Only operate the appliance with the lid in place. Only use the power unit supplied and keep it clean and dry. Beware, the appliance will get hot during operation. Always remove the lid using the plastic finger grip. Keep small children away from the appliance and never let the cord hang down over the worktop edge a small child could grab it and pull the appliance down. Take care when drinking liquids as they will be hot.
Keep hot drinks out of childrens reach. Dont drink while holding your baby. If youre passing someone a drink, make sure a child isnt underneath. Do not let infirm people use the appliance without supervision. Do not let children use or play with the appliance. Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions. before plugging in Make sure your electricity supply is the same as the one shown on the underside of the machine. The machine complies with European Economic Community Directive 89/336/EEC.
before using for the first time 1 Wash the parts: see cleaning. 2 Wrap excess cord around the cord storage device on the underside of the appliance.
lid goblet tap assembly base/paddle assembly drive power unit heating timer (up to 10 cups) keep warm button frothy mix button off/standby button brush
to use your Choco Latte Deluxe
1 Make sure the base/paddle assembly and tap are correctly assembled to the goblet, then place on the power unit.
Check that the dispensing tap lever is in the off position. Always place the liquid ingredients into the goblet first. Then add the soluble ingredients eg. powdered hot chocolate, cocoa, malted drinks, coffee powder etc., or chopped chocolate. Note: This appliance is not designed to be a blender/liquidiser or to chop solid ingredients. Ingredients for flavouring purposes such as cloves and cinnamon sticks may be used but will need to be dispensed through a strainer before serving. Fit the lid to the goblet and twist to lock into place. Connect the appliance to the power supply and the off/standby button will illuminate. (Note: the light will not glow unless the goblet is fitted). Turn the heating timer to the number of cups being made (see table below) and the unit will operate. During the heating cycle the timer will automatically count down and switch off at completion making an audible noise. The drink will have reached the correct temperature.
liquid large quantity cups 250ml 500ml 750ml 1 litre 1.25 litre 5 liquid quantity 250ml 500ml 750ml 1 litre 1.25 litre
keep warm If you press the keep warm button after step 6, the drink will be kept warm for up to 30 minutes. During this time the mixing paddle will continue to operate and the keep warm button will illuminate.

standard cups 10

7 Place a cup under the tap, press the Frothy Mix button which will illuminate then pull forward the dispensing tap lever. G Using the Frothy Mix button to dispense drinks will make the drink frothier and also help to dispense thicker drinks. 8 When the cup is almost full, release the lever to its off position and switch off by pressing the off/standby button.
hints For best results the drink should be consumed straight away. For extra richness, swirl some fresh cream on top of hot sweet drinks or add a spoonful of freshly whipped cream. The maximum capacity of the Choco Latte Deluxe is 1.25 litres and the minimum 200ml. A 1.25 litre mixture will be ready in approximately 9 minutes. If the goblet doesnt fit easily to the power unit, lift off and turn the drive on the power unit and re-fit. Your Choco Latte Deluxe will also mix cold milkshakes. Pour the cold milk into the goblet then add the liquid or powder flavouring/concentrate and press the Frothy Mix button. Allow to operate for only 1 minute then place a cup under the tap, pull forward the dispensing tap lever. When the cup is almost full, release the lever to its off position and switch off by pressing the off/standby button. At anytime during operation you can switch off the Choco Latte Deluxe by pressing the off/standby button. important Dont use the goblet assembly as a storage container. Keep it empty before and after use. Some liquids increase in volume and froth during mixing eg milk, so do not overfill and ensure the lid is correctly fitted.

cleaning

power unit Wipe with a damp cloth, then dry. lid, goblet Wash by hand, rinse with clean water then dry. cleaning the tap Remove the tap assembly from the goblet, then soak the tap in hot soapy water with the valve open. Wash thoroughly then rinse and dry. Wash and dry the goblet then refit the tap ensuring that the seals are correctly positioned on the goblet.
Always switch off, unplug and dismantle before cleaning. Take care when handling the base/paddle assembly as it may be hot. Never allow the underside of the base/paddle assembly to get wet. Never let the power unit, cord or plug get wet. After use empty the goblet and rinse thoroughly with clean water before unscrewing the tap or base/paddle assembly. Always wash immediately after use. Dont let food dry onto the goblet assembly as this will make cleaning difficult. However, if food has accidentally been left to dry on, loosen it by filling the goblet with 1.25 litres of water and operate by turning the heating timer to the 10 cup position. Dont wash any part in the dishwasher. Regularly dismantle the tap and clean the parts thoroughly. base/paddle assembly Never immerse in water or allow the underside to get wet. Remove the base/paddle assembly from the goblet. Wipe the upper surface and paddle with a damp soapy cloth, then wipe with a clean cloth and dry thoroughly. Use the brush provided to remove stubborn residue. Dont use harsh abrasives.