7 While watching the navigation screen
The Source Control screen appears. The Source Control screen appears.
The screen will return to the navigation screen by touching the same part of the Source Control screen.
For how to use each button, see the operation pages of each source.
7 While watching the Easy Control screen
The Source Control screen appears.
How to Display Top Menu Screen
Top Menu screen is the entrance to all the functions. You can enter source operation screen as well as various setup menu from this screen.

Top Menu screen

Touch the [MENU] button on any screen.
The Top Menu screen appears.
For DDX series Pressing the [TOP] button on the front panel also displays the Top Menu screen.
The buttons listed below are common for many screens. [MENU] Displays Top Menu screen. [ ] Opens the function bar. The buttons shown below appear. [ ] Displays the currently selected source screen. [ ] Displays Audio Control Menu screen. (page 55) [ ] Displays SETUP Menu screen. (page 58) [ ] Closes the function bar.
How to display the Top Menu screen
Buttons on the Top Menu screen V ] Switches to the navigation screen. [NAV [SRC] Switches to the source control screen of the selected source. The icon of this button changes according to the selected source. [TEL ] Switches to the Hands Free Main screen. (page 58) [NAV SETUP] Displays Navigation SETUP screen. (DNX series and DDX series with navigation unit only) Refer to the navigation instruction manual for setting up the navigation system. [SRC SETUP] Displays SETUP Menu screen. (page 58) [TEL SETUP] Displays Hands Free SETUP screen. (page 49) [ SRC SELECT] Displays Source Select screen. (page 12) [ ] Displays Audio Control Menu screen. (page 55) [ ] Changes the screen skin each time it is pressed.
Operation on the Playback Screen of Visual Sources
While watching visual sources, basic operation is possible by touching the screen. The screen has 4 function areas. The function of each area is different depending on the sources. (Some areas are unavailable for some sources.)
How to display the playback screen
Playback screen of a visual source
The Source Select screen appears. Touch the icon of the source.
For the function of each touching area, see the pages of each source.
* Source Information screen
The information display is cleared automatically after approximately 5 seconds.
Basic operation of each area 1 Reverse search. 2 Displays Menu control screen (DVD-VIDEO, DVD-VR source), Picture control buttons (sources with picture files), or Zoom control buttons (Video CD). Switches TV band. 3 Forward search. 4 Displays/ Clears Source Information screen.*

The Playback screen of a visual source appears.
The playback screen may appear directly after touching the source icon on Source Select screen.
How to Display the Easy Control Screen
Basic operation buttons of the selected source can be displayed on the playback screen of visual sources so that you can control the source without switching the screen.

Easy Control screen

The Easy control screen appears.
Easy Control screen is hidden when you touch the central part of the monitor.
While watching the visual source
Buttons on the Easy Control screen [] Changes the function as follows by touching the [] button. [SCRN] Displays Screen Control screen (page 42). [TEL] Switches to the Hands Free Main screen (page 45). [1], [], [4], [], [7], [8] Buttons for source control. The buttons are different depending on the source. See the operation pages of each source.

English 17

You can play DVD/Video CD using various functions.
Set the remote controller mode switch to "DVD" mode before starting operation, see <Remote Controller mode switch> (page 79).

Playback Screen

Basic functions are available even when the playback screen is displayed. 1 Display the Playback Screen See <Operation on the Playback Screen of Visual Sources> (page 16). 2 Operation on the Playback Screen

Easy Control Screen

Displays the basic operation buttons on the screen. 1 Display the Easy Control Screen See <How to Display the Easy Control buttons> (page 17). 2 Operation on the Easy Control Screen
1, 3 DVD-VIDEO Searches for a chapter. DVD-VR Searches for a chapter. Video CD Selects a scene (when PBC is On) or a track (when PBC is Off ). 2 DVD-VIDEO Displays the Menu Control 1 screen (page 20). DVD-VR Displays the Menu Control screen (page 21). Video CD Displays the Zoom Control screen (page 22). 4 Displays/ Clears Source Information screen.
1, 2 Switches to the Playback screen. 3 Displays the Source Control screen. [1], [] Fast Forwards or Fast Backwards. Changes the speed (2 times, 3 times, or off) each time the button is touched. [4], [] DVD-VIDEO Searches for a chapter. DVD-VR Searches for a chapter. Video CD Selects a scene (when PBC is On) or a track (when PBC is Off ). [7] Stops playing. When touched twice, the disc is played from its beginning when you play it the next time. [38] Plays or pauses.

Switches to the source control screen to use various playback functions. 1 Display the Source Control Screen See <How to Display the Source Control Screen> (page 14). 2 Operation on the Source Control Screen
"3" Play Mode Display "T"/ "C"/ "R"/ "P" Play Time Display Use the [TIME] to change play time display. [ ] When appears, the text display is scrolled by touching it. Multi Function

DVD-VIDEO/DVD-VR

] Closes the multi function bar. ] Opens the multi function bar.

DVD-VIDEO

[REP] Switches the Repeat Play operations in the following sequence. Title Repeat, Chapter Repeat, Repeat Off [TIME] Switches the play time display in the following sequence. Chapter ("C"), Title ("T"), remaining titles ("R")
[38] Plays or pauses. [7] Stops playing. When touched twice, the disc is played from its beginning when you play it the next time. [0] Ejects a disc. [1], [] Fast Forwards or Fast Backwards. Changes the speed (2 times, 3 times, or off) each time the button is touched. [4], [] DVD-VIDEO Searches for a chapter. DVD-VR Searches for a chapter. Video CD Selects a scene (when PBC is On) or a track (when PBC is Off ). [ ], [ ] DVD-VIDEO , DVD-VR Slow Forwards or Backwards. [ ] Switches to the playback screen. 1 Information display Title display. "Title" Title Number Display "Chap" Chapter Number Display "Scene"/ "Track" Scene/Track Number Display

DVD-VR Video CD

Video CD
[REP] Switches the Repeat Play operations in the following sequence. Title Repeat, Repeat Off [TIME] Switches the play time display in the following sequence. Title ("T"), remaining titles ("R") [PLST] Switches between the original mode and Play list mode. [REP] Switches the Repeat Play operations in the following sequence. Track Repeat, Repeat Off (Available when the PBC is off ) [TIME] Switches the play time display in the following sequence. Track ("P"), remaining discs ("R") (Effective only when the PBC function is off ) [PBC] Turns the PBC On or Off. (only when VCD Ver 2.0 is in use)

3 Select a file Folder list
Touching [List] displays the previously used Folder list or Play list.
1 Folder opens when touched, and the files in the folder are played. [ ] When appears, the text display is scrolled by touching it. [ ROOT] Moves to the top hierarchy level. [ UP] Moves up a hierarchy level. [ TOP] USB Moves to the top folder. [ CUR] Displays the currently playing folder. [CTRL] Returns to the Source Control screen.

USB Disc/USB

Play list

Au Audio File in

USB device select
Selects the connected USB device (or a partition). 1 Display the Source Control Screen See <Source Control Screen> (page 23). 2 Display the USB Device Select Screen
Scrolls to the position of the specified initial
Scrolls to the selected initial.
1 Switches to the lower level of the category. [ ] When appears, the text display is scrolled by touching it. [ ALL] Lists all the music in the selected category. [ UP] Moves to the upper level of the category. [ TOP] Moves to the top category. [ CUR] Displays the currently playing category. [CTRL] Returns to the Source Control screen.

3 Select a USB device

1 Selects a device or partition. [ UP] Returns to the Device Selection screen. [ ] When appears, the text display is scrolled by touching it. [CTRL] Returns to the Source Control screen.

English 25

Link search (Audio file in USB)
Searches for another song of the currently selected artist. 1 Display the Source Control Screen See <Source Control Screen> (page 23). 2 Start Link search
Playback Screen (Video file, Picture file)

3 Select a song

1 Plays the touched song. [ ] When appears, the text display is scrolled by touching it. [ TOP] Moves to the top category. [ CUR] Displays the currently playing category. [CTRL] Returns to the Source Control screen.
1, 3 Searches for a file. 2 JPEG Displays the Picture Control screen (page 27). MPEG/DivX Displays the Menu Control screen (page 28). 4 Displays/ Clears Source Information screen.
The information display is cleared automatically after approximately 5 seconds. Also, the information can be displayed automatically when it is updated.
Easy Control Screen (Video file, Picture file)
Displays the basic operation buttons on the screen. 1 Display the Easy Control Screen See <How to Display the Easy Control Screen> (page 17). 2 Operation on the Easy Control Screen

Picture Control

Adjusting the picture display. 1 Display the Playback Screen See <Operation on the Playback Screen of Visual Sources> (page 16). 2 Display the Picture Control Screen

* Disabled when VIDEO is being played.

iPod List

Lists and searches music/video contained in the iPod. 1 Display the Source Control Screen See <Source Control Screen> (page 30). 2 Display the iPod List

Link Search (Music file)

Searches for another song of the currently selected artist. 1 Display the Source Control Screen See <Source Control Screen> (page 30). 2 Start Link search

3 Select music/video

1 Categories and music are listed. Touch a category name to move to its lower level. If music title is displayed, the music is played by touching it. When [38] is appeared, all the music in its category is played by touching the button. [ ] When appears, the text display is scrolled by touching it. [ UP] Returns to previous category. [ TOP] Moves to the top category. [ CUR] Displays the currently playing category. [CTRL] Returns to the Source Control screen.
Various control screens appear in the Tuner Source mode.
Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller mode switch> (page 79).
Switches to the source control screen to use various functions. 1 Display the Source Control Screen See <How to Display the Source Control Screen> (page 14). 2 Operation on the Source Control Screen
[FM] Switches to the FM1/2/3 band. [AM] Switches to the AM band. [TI] Turns the Traffic Information function On or Off. See <Traffic Information>, (page 35). [4], [] Tunes in a station. Use the [SEEK] to change the frequency. [List] Display the Tuner Preset List screen. See <Preset Select> (page 33). 1 Information display Selects the Program Service Name, Title & Artist name, Station Name, Radio Text Plus, or Radio Text. "FM"/ "AM" Band display "Preset" Preset number "MHz"/ "kHz" Frequency display [ ] When appears, the text display is scrolled by touching it.
[AME] Selects the Auto Memory mode. See <Auto Memory> (page 33). [PRE] Lists and selects memorized station. [4Line]/ [2Line] Switches the number of lines displayed in the Information Display. [PTY] FM Searches station by program type. See <Search by Program Type> (page 35). [Mono] FM Selects the Monaural reception. [LO.S] Turns the Local Seek function ON or OFF. [TEXT] FM Displays Radio Text screen. See <Radio Text> (page 34).
[1/3] Switches the multi function display. [ ] Closes the multi function bar. [ ] Opens the multi function bar. [P1] [P6] When [P1] to [P6] buttons appear, you can recall the stations on memory. For memory of broadcasting stations, see <Auto Memory> (page 33) or <Manual Memory> (page 34). [SEEK] Switches the Seek mode. The mode is switched in the following order each time you touch the button. Display Setting "AUTO1" Tunes in a station with good reception automatically. "AUTO2" Tunes in stations in memory one after another. "MANU" Switches to the next frequency manually.

Voice Registration

Registers voice for voice recognition in Phonebook. Up to 35 voices can be recorded in one cell-phone. 1 Display the Phonebook Detail screen Go through the procedure of <Calling by Phonebook> (page 46). 2 Select the name to register

6 End voice registration

A message is displayed if the voice is not recognized. Read the message for the further operation. Repeat from 1st try if the voice is different from the 1st try.
3 Display the voice registration screen
4 Say the name to register (1st try)
Say within 2 seconds after the Beep. 5 Say the name to register (2nd try) Say within 2 seconds after the Beep.
1 Selects a name. [Record] Registers the voice for voice recognition to the selected Phonebook. If there are already 35 voice tag registered in the same cell-phone, [Record] button is deactivated. [Play] Plays the voice registered in the selected Phonebook data. [Delete] Deletes the voice registered in the selected Phonebook data. Touch to display the confirmation screen. Touch [Yes] to delete or [No] to cancel.
Key Word Voice Registration
Registers the voice to select the Phone number category by Voice Recognition. 1 Display the Hands Free Setup screen See <Setting Up the Hands-Free Phone> (page 49). 2 Display the Key Word List screen
5 Say the phone category to register (1st try)
Say within 2 seconds after the Beep. 6 Say the phone category to register (2nd try) Say within 2 seconds after the Beep. 7 End voice registration
1 Selects the Phone number category. "REC" turns on for data with voice for voice recognition already registered. [Record] Registers voice for the selected Phone number category. [Play] Plays the voice registered for the selected Phone number category. [Delete] Deletes the voice registered for the selected Phone number category. Touch to display the confirmation screen. Touch [Yes] to delete or [No] to cancel.
[Play], [Delete] Only for DDX5026 and DDX5056 with optional Bluetooth unit KCA-BT200 connected.
4 Display voice registration screen
3 Select the Phone number category to register

English 51

Phone Number Preset
Registers frequently used phone number to Hands Free control screen preset button. 1 Display the Hands-Free Control screen See <Making a call> (page 45). 2 Select the Preset number to register

When [Select Mode] is set to "Advanced" (DNX series only)

Touch Panel Adjustment

You can adjust the touch panel operations. 1 Display the Touch panel Adjustment screen
[Navigation Language Select] Selects the language used for navigation. ( "British English")

Touch [ ]>[ (page 58)

] > [System] > [Touch].

2 Adjust the Touch panel

Follow the instruction on the screen and touch the center of. [Cancel] Cancels the adjustment and returns to the Touch Panel Adjust screen. [Reset] Resets to the initial status.

Clock Setup

You can adjust the clock time. 1 Display the Clock Setup screen Touch [ ]>[ (page 58) 2 Setup the Clock

Security Setup

You can set a security code to protect your receiver system against theft.
] > [System] > [Clock].
When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 digit number of your choice.
1 Display the Security screen Touch [ ] > [ (page 58) ] > [System] > [Security].
2 Setup the SI (Security Indicator)
1 Adjusts hours. 2 Adjusts minutes. [Reset] Sets "00" minute. Setup examples: 3:00 3:29 \ 3:00 3:30 3:59 \ 4:00 [Synchronize] Sets the clock time in synchronization with the time data sent from the navigation system or the RDS station. ( DNX series: "Navigation", DDX series: "RDS") "OFF"/ "RDS"/ "Navigation" When the synchronized mode is set, the clock cannot be adjusted manually. 3 Adjust the clock time
[Security Code Set] Displays the Security code input screen. [SI] Turns the SI function on or off. If turned "ON", the Security indicator on the front panel flashes when the vehicle ignition is off. ( "ON")
3 Start Security Code setup
If you have already completed the code registration, [CLR] is displayed.

4 Enter a security Code

Input four-digit number.
5 Register your security code

Setup Memory

Audio Control, AV-IN SETUP, AV Interface, Navigation, and Audio SETUP settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. 1 Display the SETUP Memory screen Touch [ ]>[ ] > [System] > [SETUP Memory]. (page 58) 2 Start Setup Memory
6 Reenter the security code Reenter the same security code as that you have entered in Step 4 for confirmation.
If you enter a different security code, the screen returns to Step 4 (for the first code entry).
7 Register the security code again
Now, your security code is registered. If you have pressed the Reset button or if you have disconnected the Receiver from battery. 1 Enter the correct security code

[Initialize] Initialization resets the settings made using the Panel Color to the default settings made at the factory. [Panel Color Scan] When set to "ON", the illumination color of the buttons changes one after another.
When touching [SET] or [Initialize], make sure [Panel Color Scan] is set to "OFF".
Setup Menu To register your original color 1 Start the RGB coordinate

Screen Adjustment

You can adjust the screen mode of the monitor. 1 Display the Screen Adjust screen
2 Adjust each color value
Touch [ ]>[ Adjust]. (page 58) 2 Set each item
] > [Display] > [Screen
3 Select a Preset number to register
Adjusted color is registered to the selected Preset button. 4 Complete the color coordination
1 Selects a preset number to register. [Red Value] Adjusts the Red value. [Green Value] Adjusts the Green value. [Blue Value] Adjusts the Blue value.
[Bright] Brightness Control [Contrast] Contrast Control [Black] Black Level Adjustment [Dimmer] Dimmer Mode Setup "ON": The display dims. "OFF": The display doesnt dim. "SYNC": Turning the Dimmer function On or Off when the vehicle light control switch is turned On or Off. "NAV-SYNC": Turning the Dimmer function On or Off according to the Navigation Day/Night display setting. (DNX series and DDX series with navigation unit only)
In this Screen Adjust screen, you can perform setups for the menu screen. Setups for videos such as DVD can be performed on the <Screen Control> (page 42).
Registering Bluetooth Unit
Registers the Bluetooth unit to be connected. 1 Display the Bluetooth Setup screen Touch [ ]>[ (page 58) ] > [Bluetooth SETUP].
4 Select the Bluetooth unit to register
2 Display the Connect Device List screen 1 Displays the searched Bluetooth unit. [Search] Searches for a Bluetooth unit. [Cancel] Cancels searching of Bluetooth unit. 5 Enter PIN code
3 Search for a Bluetooth unit
1 Displays the registered Bluetooth units. The busy service becomes active. The available service becomes inactive. [ ] When appears, the text display is scrolled by touching it. [Search] Searches for a Bluetooth unit. [SP DEV] Registers a Bluetooth unit that cannot be registered by normal register (pairing) operation.

A new device cannot be registered if there are already 5 Bluetooth units registered. Delete unnecessary registration. See <Bluetooth Unit Connection> (page 69).
[A2DP Connect Device] Only for DDX5026 and DDX5056 with optional Bluetooth unit KCA-BT200 connected.
1 Enters a code number using the keypad. [Enter] Confirms the entered PIN code. Enter the PIN code specified for the Bluetooth unit you are registering. This button will not be active until at least four PIN code digits have been entered. [Cancel] Cancels registration of PIN code. [Clear] Clears the code number.
You can also register from the Bluetooth unit side. For the PIN code necessary for registration, see <Registering Bluetooth Unit PIN Code> (page 68). If the error message appears even though the PIN code is correct, try <Registering Special Bluetooth Unit>. The screens used in this manual are for models with optional Bluetooth unit KCA-BT200 connected. Models with built-in Bluetooth function do not have some buttons described in this manual.

English 67

Setup Menu Registering Special Bluetooth Unit Registers Special Bluetooth unit, that resulted in error by normal registration method, by selecting from the listed models. 1 Display the Special Device List screen 1 Display the Bluetooth Setup screen Touch [ ]>[ (page 58) 2 Select a model name ] > [Bluetooth SETUP].
Registering Bluetooth Unit PIN Code
Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side.
2 Display the Receiver PIN Code screen
3 Confirm whether to register
Only models in Bluetooth unit name list can be registered.
4 Go through the procedure of <Registering Bluetooth Unit> and complete the registration (pairing)
Displays the Bluetooth unit name that can be registered.

3 Enter PIN code

1 Enters a code number using the keypad. [Cancel] Cancels registration of PIN code. [Enter] Registers the entered PIN code. [Clear] Clears the code number.
Bluetooth Unit Connection
Selects the Bluetooth unit to connect. 1 Display the Bluetooth Setup screen Touch [ ]>[ (page 58) ] > [Bluetooth SETUP].
Bluetooth Hands-Free/Audio Output Setup
Selects speakers to output the sound of handsfree phoning (such as phone call voice and ringing tone) and Bluetooth audio. 1 Display the Bluetooth Setup screen ]>[ Touch [ (page 58) ] > [Bluetooth SETUP].
2 Display the Connect Device List screen
3 Select a registered Bluetooth unit
4 Select the service to use
[TEL (HFP)] Connects/disconnects cell-phone to use for Hands Free. [Audio (A2DP)] Connects/disconnects Audio player to use for Bluetooth Audio. [Remove] Deletes registration (pairing). Touching the screen displays a confirmation message. Touch [Yes]. To cancel clearing, touch [No].

1 Enters a language code. [Cancel] Cancels the language setup and returns to the "DVD SETUP" screen. [Enter] Sets the language and returns to the "DVD SETUP" screen. (It appears after you have entered a language code.) [Original] Sets the DVD's original language (only when setting an audio language). [Clear] Clears the language code.
4 Set the language you use
1 Enters a code number. [Cancel] Cancels the current setup and returns to the "DVD SETUP" screen. [Level] Indicates the present parental lock level. [Enter] Determines the code number and displays the Parental Level setup screen. [Clear] Clears the code number.
The number you enter first is set as your code number.
4 Display the Parental Level SETUP screen
5 Select a parental level and complete the setup

Disc Setup

Performs setup when using disc media. 1 Display the DVD Setup screen Touch [ ]>[ ] > [DVD SETUP]. (page 58)
2 Display the Disc Setup screen
Selects a parental level.
If a disc has higher parental lock level, you need to enter the code number. The parental lock level varies depending on a loaded disc. If a disc has no parental lock, anybody can play it back even when you have set the parental lock.
[Picture Display Time] Selects a picture display time. ( "Long") The Display of a JPEG picture is changed. ("Short", "Middle", "Long") [CD Read] Sets a music CD playback. ( "1") "1": Automatically recognizes and plays back an Audio file disc, a DVD or a music CD. "2": Forcibly plays back a disc as a music CD. Select "2" if you wish to play a music CD having a special format or if you cannot play a disc in the "1" position. [On Screen DVD] Sets an on-screen display of the DVD Playback screen. ( "Manual") "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen.
[CD Read] Disabled when a disc is in the unit. You cannot play an Audio file/VCD disc in the "2" position. Also, you may not play some music CDs in the "2" position.

English 75

USB Setup
Performs setup when using USB. 1 Display the USB Setup screen Touch [ ]>[ ] > [USB SETUP]. (page 58)

iPod Setup

Performs setup when using iPod. 1 Display the iPod Setup screen Touch [ ]>[ ] > [iPod SETUP]. (page 58)
[Picture Display Time] Selects a picture display time. ( "Long") The Display of a JPEG picture is changed. ("Short", "Middle", "Long") [On Screen USB] Sets an on-screen display of the USB Playback screen. ( "Auto") "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen.

? The Touch Sensor Tone doesnt sound.
The preout jack is being used. The Touch Sensor Tone cant be output from

the preout jack.

Tuner source
? Radio reception is poor.
The car antenna is not extended. Pull the antenna out all the way.
! Cannot select the output destination of the
subsource in the Dual zone. Cannot adjust the volume of the rear speakers. The Dual zone function is disabled. <Zone Control> (page 57)
! Cannot play audio files.

"2".

"CD Read" of <Disc Setup> (page 75) is set to

! Cannot Folder select.

The Random play function is enabled.
! Cannot perform Repeat play.
The PBC function is enabled.
! Cannot set up the equalizer.
Cannot set up the crossover network. The Dual zone function is enabled. <Zone Control> (page 57) The unit is set to STANDBY source.

Disc source

media.
? The specified disc does not play, but another
one plays instead. The specified CD is quite dirty. Clean the CD.
The disc is severely scratched. Try another disc instead.

Audio file source

? The sound skips when an Audio file is being
played. The media is scratched or dirty. Clean the media, referring to the CD cleaning of the section on <Handling discs> (page 4).
The recording condition is bad. Record the media again or use another
The antenna control wire is not connected. Connect the wire correctly, referring to the
section on <INSTALLATION MANUAL>.

Help? Error

When the unit fails to operate correctly, the cause of the failure appears on the display.
"Protect" : Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. "No Media File" : The connected USB device contains no playable audio file. Media was played that doesnt have data recorded that the unit can play. "USB Device Error!!" : The connected USB device is rated a current capacity higher than the allowable limit.
Wire or insulate the speaker cord as appropriate and then push the Reset button.
"Hot Error" : When the internal temperature of this unit rises to 60C or more, the protection circuit is activated and you may not be able to operate the unit. At such times this message will appear.

Check the USB device.

Some trouble may have occurred to the connected USB device.
Change the source to any source other than USB. Remove the USB device.
"Authorization Error" : Connection to the iPod has failed. The unit does not support the iPod.
Use the unit again after reducing the temperature inside the vehicle.
"Mecha Error" : The disc player is malfunctioning.
Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected.

USB interface section

USB Standard : USB 2.0 File System : FAT 16/ 32 Maximum Power Supply Current : 500 mA D/A Converter : 24 Bit Video Decoder : MPEG1/ MPEG2/ DivX Audio Decoder : MP3/ WMA/ AAC/ WAV
Bluetooth section (DNX5260BT)

DVD player section

D/A Converter : 24 bit Audio Decoder : Linear PCM/ Dolby Digital/ dts/ MP3/ WMA/ AAC/ WAV Video Decoder : MPEG1/ MPEG2/ DivX Wow & Flutter : Below Measurable Limit Frequency Response Sampling frequency 96 kHz : 20 22,000 Hz Sampling frequency 48 kHz : 20 22,000 Hz Sampling frequency 44.1 kHz : 20 20,000 Hz Total Harmonic Distortion : 0.010 % (1 kHz) S/N Ratio (dB) : 98 dB (DVD-Video 96 kHz) Dynamic Range : 98 dB (DVD-Video 96 kHz) Disc Format : DVD-Video/ VIDEO-CD/ CD-DA Sampling Frequency : 44.1/ 48/ 96 kHz Quantifying Bit Number : 16/ 20/ 24 bit
Technology : Bluetooth Ver. 2.0 Certified Frequency : 2.402 2.480 GHz Output Power : +4dBm (MAX), 0dBm (AVE), Power Class2 Maximum Communication range : Line of sight approx. 10m (32.8 ft) Profile HFP (Hands Free Profile) SPP (Serial Port Profile) HSP (Headset Profile) OPP (Object Push Profile) PBAP (Phonebook Access Profile) SYNC (Synchronization Profile)

FM tuner section

Frequency Range 50 kHz : 87.5 MHz 108.0 MHz Usable Sensitivity (S/N : 26 dB) : 0.7 V/ 50 Quieting Sensitivity (S/N : 46 dB) : 1.6 V/ 75 Frequency Response ( 3.0 dB) : 30 Hz 15 kHz S/N Ratio (dB) : 65 dB (MONO) Selectivity ( 400 kHz) : 80 dB Stereo Separation : 35 dB (1 kHz)

Video section

Color System of External Video Input : NTSC/ PAL External Video Input Level (mini jack) : 1 Vp-p/ 75 External Audio Max Input Level (mini jack) : 2 V/ 25 k Video Output Level (RCA jacks) : 1 Vp-p/ 75 Audio Output Level (RCA jacks) : 1.2 V/ 10 k

Audio section

Maximum Power (Front & Rear) : 50 W x 4 Full Bandwidth Power (Front & Rear) : 30 W x 4 (PWR DIN 45324, +B=14.4V) Preout Level (V) : 2 V/ 10 k Preout Impedance : 600 Speaker Impedance :48 Tone Action Bass : 100 Hz 8 dB Middle : 1 kHz 8 dB Treble : 10 kHz 8 dB

LW tuner section

Frequency Range (9 kHz) : 153 kHz 279 kHz Usable Sensitivity : 45 V

MW tuner section

Frequency Range (9 kHz) : 531 kHz 1611 kHz Usable Sensitivity : 25 V