Reviews & Opinions
Independent and trusted. Read before buy Kenwood DDX8022BT!

Kenwood DDX8022BT

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Kenwood DDX8022BT Car Audio, size: 8.8 MB
Related manuals
Kenwood DDX8022BT Installation Manual

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Kenwood DDX8022BTAbout Kenwood DDX8022BT
Here you can find all about Kenwood DDX8022BT like manual and other informations. For example: review.

Kenwood DDX8022BT manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Kenwood DDX8022BT please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Kenwood DDX8022BT photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

Selected source can be controlled while displaying navigation screen. 1 Display the easy control buttons
When "DVD" is selected:

DVD VIDEO Title

2 Setting the navigation system function Touch the navigation system button displayed on the screen. See the included NAVIGATION SYSTEM's INSTRUCTION MANUAL for information on using the navigation system.
You can set the navigation system function when nothing else is displayed on the screen. If anything else, such as Easy control panel is displayed, erase it first. For DDX8022BT, an optional navigation system needs to be connected. See <Navigation unit that can be connected to this unit> (page 7) for connectable navigation units.
1 : changes between [SCRN], [TEL], and [EXT SW] button each time this is pressed. SCRN: Displays the Screen Control screen. See <Screen Control> (page 49). TEL: Displays the Hands Free screen. (page 50) EXT SW: Displays the external device control screen. See <External Device Power Supply Control> (page 46). 2 Adjust the volume. 3 During DVD play : Selects a chapter. During VCD play : Selects a scene (when PBC is On) or a track (when PBC is Off ). During CD play : Selects music. During Audio file, Video file, or Picture file play : Selects a file. 4 Stops playing. When pressed twice, the disc is played from its beginning when you play it in the next
time. (DVD play only) 5 Plays or pauses. 6 When touched this area, the source control screen appears. When "USB" or "iPod" is selected:

P 0:00:05

7 During iPod play : Searches Music or Video. During USB play : Selects a file. 8 Plays or pauses. 9 When touched this area, the source control screen appears. When "TUNER" is selected:

TUNER 10

98.1 MHz
p Tunes in a station. q Switches the band (to AM or FM 1/2/3). w When touched this area, the source control screen appears. When "TV" is selected:
e Selects a channel. Use the <Seek Mode> (page 42) to change the channel tuning sequence. r Switches to TV1 or TV2.*1 t Switches the Seek mode.*1 y When touched this area, the source control screen appears. When "Bluetooth" is selected:

u i o ;

Selects a file. Plays. Pauses. When touched this area, the source control screen appears.
The Easy Control buttons are hidden when you touch the central part of the screen. *1Not available for the optional digital TV tuner KTCD500E.
Accessing the SD Memory Card Insertion Slot (DNX8220BT only)
An SD memory card is used to upgrade the map. 1 Press [SRC] to turn the power on
2 Press [0] to close the panel
3 Press [0] for at least 1 second to fully open the panel
See the NAVIGATION SYSTEM's INSTRUCTION MANUAL for the detail upgrade method.
You can play DVD/VCD using various functions.
For the basic method of how to watch DVD/VCD, refer to <Basic Operations> (page 10). Set the remote controller mode switch to "DVD" mode before starting operation, refer to <Remote Controller mode switch> (page 94).

Functions During the Playback Screen
Basic functions are available even when the playback screen is displayed. 1 Display the playback screen
6 DVD Disc Menu Control Buttons Area Displays the Disc Menu Control buttons (page 21). The Highlight Control screen appears when pressed while the DVD Top menu is displayed. 7 Information Display Button Area Turn off the information when it is displayed. DVD Audio playback screen
DVD AUDIO Mode:Full AVOUT:AVIN

DVD AUDIO

Tr a c k

1 T 00:00:05

DVD playback screen
Group Number Display Track Number Display Play Time Display Forward Track Search Area Selects the next track. w Backward Track Search Area Selects the previous track. e DVD Disc Menu Control Buttons Area Displays the Disc Menu Control buttons (page 21). r Information Display Button Area Turn off the information when it is displayed. VCD playback screen
DVD VCD Mode:Full AVOUT:AVIN

1 T 0:00:05

Title Number Display Chapter Number Display Play Time Display Forward Chapter Search Area Selects the next chapter. 5 Backward Chapter Search Area Selects the previous chapter.

DVD VCD

VER2 ST
t Scene/Track Number Display y Play time Display u Forward Scene/Track Search Area
Selects the next scene (when PBC is On) or track (when PBC is Off ). i Backward Scene/Track Search Area Selects the previous scene (when PBC is On) or track (when PBC is Off ). o Zoom Control Button Area Displays the Zoom Control buttons (page 22). ; Information Display Button Area Turn off the information when it is displayed.
Functions When Displaying the Easy Control Panel
Displays the basic operation buttons on the screen. 1 While the source is playing, press the [FNC] button
The information display is cleared automatically after approximately 5 seconds. Also, the information can be displayed automatically when it is updated.
1 Chapter Search (during DVD play) Searches for a chapter. Track Search (during DVD Audio play) Searches for a track. Scene/Track Search (during VCD play) Selects a scene (when PBC is On) or a track (when PBC is Off ). 2 Stops playing. When pressed twice, the disc is played from its beginning when you play it in the next time. 3 Plays or pauses. 4 Switches to the playback screen.

or Displays the basic operation buttons on the screen. 1 While the source is playing, press the [FNC] button

PICTURE

DVD MEDIA 2 1
1 Selects a file. 2 Stops playing. 3 Plays or pauses.
1 Folder/File Number Display 2 Play Time Display 3 Forward File Search Area Selects the next file. 4 Backward File Search Area Selects the previous file. 5 JPEG: Picture Control Button Area (page 28) DivX: Sub=Off, Audio 1/1 MPEG: Not effective 26 DNX8220BT/DDX8022BT
Switches to the source control screen to use various playback functions. 1 While the source is playing, press the [FNC] button 6 7

p q w e

u i o ; a s d f
is appeared, the text display is When scrolled by pressing it. Fast Forwards or Fast Backwards. (Disabled when a JPEG is being played.) Stops playing. When pressed twice, the disc is played back from its beginning in the next time. Selects a file. Plays or pauses. Ejects a disc. Selects a folder. Switches the button display. Starts or stops Scan Play (that plays the beginning of each song or data one after the other). Repeats to play (the preset files or data). Starts or stops Random Play (to play files of the present folder in random order). Switches the number of lines displayed in the Information Display. Displays the Hands Free screen. (page 50) Function Indicator MUSIC, MOVIE or PICTURE indicator Appears when a disc is inserted. Repeats to play the file of the present folder. You can search for folders and files through a hierarchy. Displays information of file being played. Displays the external device control screen. See <External Device Power Supply Control> (page 46).
Switches to the playback screen. Folder and File Number Display Play Mode Display Play Time Display Video/Picture information display Selects Folder Name, File Name, Title, Artist Name, or Album Name. English 27
Video File/Picture File Watching

Picture Control

Adjusting the video display. 1 Start Picture Control

Folder Select

Searches folders and Video files/Pictures stored in media and devices according to hierarchy. 1 Start Folder Select
2 Adjust the video display

Picture Ctrl

2 Selects a file
Reverses the picture horizontally. Rotates counter clockwise. Rotates clockwise. Ends Picture Control.
1 Lists folders and Video files/Picture files. Folder opens when touched, and the Video/ Picture file is played. When is appeared, the text display is scrolled by pressing it. 2 Scrolls the list. 3 Moves to the top hierarchy level. 4 Moves up a hierarchy level. 5 Opens the selected folder. 6 Returns to the original screen.

Traffic Information

When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. 1 Set the Traffice information mode

2 Display the radio text

When the traffic bulletin starts. The Traffic Information screen appears automatically. Traffic Information screen
1 Selects the Program Service Name, Title & Artist name, Station Name, Radio Text Plus, or Radio Text for text display. When is appeared, the text display is scrolled by pressing it. 2 Scrolls the text display. 3 Returns to the original screen.
It is necessary to have Traffic Information function set to On in order to have the Traffic Information screen appear automatically. During reception of traffic information the adjusted volume is automatically remembered, and the next time it switches to traffic information it's automatically the remembered volume.

Search for Program Type

A program is tuned when you set its program type. (Only when receiving the FM broadcast) 1 Enter Program Type mode

2 Select a Program Type

1 Program Type is displayed. Touch to select a Program Type. 2 Scrolls the Program Type list. 3 Search a station of the selected Program Type
You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP300V (optional accessory). You can also display video contents on this unit when connecting an iPod with video.

Connecting an iPod

Connect an iPod to this unit.
Functions when Displaying the Easy Control Panel
AVOUT:AVIN iPod Mode:Full AVOUT:AVIN
1 Forward music/video search area Selects the next music/video. 2 Backward music/video search area Selects the previous music/video. 3 Information display button area The information is displayed for 5 seconds.
1 Music/Video Search. 2 Plays or pauses.
Remove all accessories such as headphone before connecting an iPod. You may not be able to control the iPod if you connect it with accessories attached. When you connect an iPod to this unit, playback starts from the song you were playing on the iPod itself (Resume Function). If the played song is not a video content, "No iPod Video Signal" is displayed on the video screen. While connecting an iPod, "KENWOOD" appears on the iPod and the iPod's control is disabled.
Functions while Displaying the Control Screen
Switches to the source control screen to use various playback functions. When Video or picture is playing, press the [FNC] button.
1 Image picture Switches to the playback screen. If there is no playback screen, wallpaper is displalyed. 2 Total number of music in the iPod and the music number display 3 Play Mode Display 4 Play Time Display 5 Music/Video Information Display Selects the Title, Artist Name, Album Name or iPod Name. When is appeared, the text display is scrolled by pressing it. 6 Fast Forwards or Fast Backwards. 7 Selects Music/Video. 8 Plays or pauses. 9 Switches the button display. p Starts or stops Scan Play (that plays the beginning of each music or video one after the other). q Repeats to play (the preset files or data). w Starts or stops Random play.* e Displays the Hands Free screen. (page 50) r MUSIC or VIDEO indicator t Starts or stops Album Random Play (plays randomly from current album).* y Displays the external device control screen. See <External Device Power Supply Control> (page 46). u Displays the list of music category. See <iPod List> (page 36). i Displays the list of video category. See <iPod List> (page 36). o Displays the previous music/video list screen. See <iPod List> (page 36). ; Displays information screen of music/video being played.

Character Entry screen

1 Shifts the cursor. 2 Enters characters. 3 Scrolls up or down the character button display. 4 Sets the key layout of the character buttons. ABC : Alphabetical key layout. QWE : Qwerty key layout. 5 Enters a space. If you erase a character, locate the cursor on it and touch this button. 6 Clears the character. 7 Exits the Character Entry mode and returns to the previous screen.
You can enter characters only after you have applied the parking brake.

Screen Control

Setting the monitor screen.
1 Display Easy Control panel
Day/Night display setting. 7 Returns to the previous screen.
The Screen Control screen is displayed only when you have applied the parking brake. The picture quality can be set for each source. You can set image quality of screens such as menu from <Monitor Setup> (page 77) of the <Setup Menu>.
2 Display the Screen Control screen
3 Adjust the picture quality

ON SYNC NAV-SYNC

1 Brightness Control 2 Tint Control Displayed for an NTSC system image on TV, Video, iPod or Rear View Camera. 3 Color Control Displayed on TV, Video, iPod or Rear View Camera screen only. 4 Contrast Control 5 Black Level Adjustment 6 Dimmer Mode Setup "ON": The display dims. "OFF": The display doesnt dim. "SYNC": Turning the Dimmer function On or Off when the vehicle light control switch is turned On or Off. "NAV-SYNC" (DNX8220BT only): Turning the Dimmer function On or Off according to the Navigation English 49
Various functions can be used in the Hands Free control mode.
To use the Phonebook, it must be downloaded to this unit in advance. For details, see <Downloading the Phonbook> (page 50). You need to register your cell-phone before using it with this unit. For more details, see <Registering Bluetooth Unit> (page 82). If you have registered two or more cell-phones, you need to select one of them. For more details, see <Bluetooth Unit Connection> (page 84).

Control Screen Function

Displaying the control screen and using various functions. 1 Display the Hands Free Control screen
Press the [FNC] button for more than 1 second. or
Downloading the Phonebook
Downloads the phonebook data from the cell-phone to this unit so that you can use the Phonebook of this unit. 1 By operating the cell-phone, send the phonebook data to this unit. 2 By operating the cell-phone, start the hands-free connection.

6 Phonebook data list. "REC" turns on for data with voice for voice recognition already registered. 7 Scrolls the Phonebook data list. 8 Scrolls the name. 9 Registers the voice for voice recognition to the selected Phonebook. If there are already 35 voice tag registered in the same cellphone, [Record] button is deactivated. See <Voice Registration> (page 57). p Plays the voice registered in the selected Phonebook data. q Deletes the voice registered in the selected Phonebook data. Touch to display the confirmation screen. Touch [YES] to delete or [NO] to cancel. w Displays the detail of the selected Phonebook data. e Returns to the Hands Free Control screen. 4 Select the phone number to call
Making a Call Using Outgoing/Incoming Call Records
Calls by selecting a phone number from the outgoing or incoming calls list. 1 Display the Outgoing Calls or Incoming Calls screen
Calling by Voice Recognition
Calls by recognizing the registered voice.
In order to perform voice recognition, voice must be registered in the Phonebook data. See <Voice Registration> (page 57). Or, to perform voice recognition by Phone number category (Home, Office, Mobile etc.) of Phonebook data, a key word voice must be registered. See <Key Word Voice Registration> (page 58).
1 Display the Voice Recognition screen
: Outgoing Calls : Incoming Calls The Outgoing Calls or Incoming Calls list screen appears. 2 Select from calls list Example : Outgoing Calls screen
2 Utter the voice registered in the Phonebook
Utter within 2 seconds after the Beep. Outgoing Calls list. Scrolls the list. Makes a call to the selected number. Creates an SMS for the selected phone number. See <SMS (Short Message Service)> (page 60). 5 Displays the detail of the selected phone number. 6 Returns to the Hands Free Control screen. 3 Make a call
1 Displays the recognized phone number or address. 2 Cancels voice recognition.
If the voice recognition is succeeded and there is only one phone number found:
The Outgoing Calls list screen or Incoming Calls list screen shows the list of the calls originated from or received at this unit. They are not the ones stored in the cell-phone memory.
Make a call. 2 Cancels voice recognition. 3 Displays the phonebook list.

English 55

Hands Free Unit Control If you hear another Beep sound: Speak the key word within 2 seconds after the Beep, or touch the [Phonebook List] button to select the phone number.
Setting Up the Hands Free Phone
The Hands Free system can be set as follows. 1 Display the Hands Free Setup screen

Make a call.

If there are more than one phone numbers registered under the same name, and the key word voice is registered for each phone number, you will hear another beep. For how to register key word, see <Key Word Voice Registration> (page 58).

Either the time interval for automatic answer set on this unit or the time interval set on the cell-phone, whichever is shorter, takes effect. Select the speaker which is further from the microphone in order to prevent howling or echoes.
1 Selects a name. "REC" turns on for data with voice for voice recognition already registered. 2 Display the voice registration screen
3 Utter the voice to register (1st try)
2 Registers the voice. 3 Cancels voice registration.
Utter within 2 seconds after the Beep. 4 Utter the voice to register (2nd try)

English 57

Hands Free Unit Control 5 End voice registration
Key Word Voice Registration
Registers the voice to select the Phone number category by Voice Recognition. 1 Display the Key Word List screen Display the "Hands Free" screen and touch [Setup]. See <Control Screen Function> (page 50).
A message is displayed if the voice is not recognized. Read the message for the further operation. Repeat from 1st try if the voice is different from the 1st try.
2 Select the Phone number category to register
1 Selects the Phone number category. "REC" turns on for data with voice for voice recognition already registered. 2 Registers voice for the selected Phone number category. 3 Plays voice registered for the selected Phone number category. 4 Deletes voice registered for the selected Phone number category. Touch to display the confirmation screen. Touch [YES] to delete or [NO] to cancel. 5 Returns to the Hands Free Set Up screen. 3 Display voice registration screen
4 Utter the voice to register (1st try)

Phone Number Preset

Registers frequently used phone number to Hands Free control screen preset button.
1 Display the Hands Free Preset List screen Display the "Hands Free" screen and touch [Setup]. See <Control Screen Function> (page 50)
6 Registers the voice. 7 Cancels voice registration.
Utter within 2 seconds after the Beep. 5 Utter the voice to register (2nd try)

2 Select a speaker type

You can select any of the following speaker types.
Center speaker: NONE, 40mm x 70mm, 5cm, 10cm, 13cm, 16 cm over Front speakers: OEM, 10cm, 13cm, 16cm, 17cm, 18cm, 4x6 inches, 5x7 inches, 6x8 inches, 6x9 inches, 7x10 inches Rear speakers: NONE, OEM, 10cm, 13cm, 16cm, 17cm, 18cm, 4x6inches, 5x7inches, 6x8 inches, 6x9 inches, 7x10 inches
w Selects a speaker to be set. (see <Channel Level>, page 64) e Sets the speaker volume. (see <Channel Level>, page 64) r Starts or stops test signal tone output for setup check. t Displays the Speaker Set Up screen. y Returns to the "SETUP Menu" screen.

English 63

Subwoofer: NONE, 16cm, 20cm, 25cm, 30cm, 38cm over

Channel Level

You can set the volume at each setup position. 1 Select a speaker you wish to adjust
Select "NONE" if you have no speakers. If you set the center speaker to "NONE" even in a short time when you are setting the Surround Control (page 91) to "Bypass+Center", the Surround Control is set to "Bypass" automatically. If you set the center and rear speakers to "NONE" when you are setting the Surround Control (page 91) to "Dolby PL II", the Surround Control is set to "Bypass" automatically.
Center speaker Left front speaker Right front speaker Left rear speaker Right rear speaker Subwoofer

2 Adjust the volume

DTA Setup
You can manually set the sound output timing of each channel. 1 Display the DTA Setup screen
When the values of center speaker and front speakers increase, they are virtually moved forward. When the values of rear speakers and subwoofer increase, they are virtually moved backward.
1 Selects a speaker to be adjusted. 2 Sets a delay time of the selected speaker. 3 Returns to the Car Type Set Up screen. 2 Select a speaker you wish to adjust
Center speaker Front speaker Rear speaker Subwoofer

2 Set a delay time

The speakers are virtually moved to the desired distance. English 65

Crossover Network Setup

You can set a crossover frequency of speakers. 1 Select the speaker to set the crossover
on the Speaker Set Up screen.
1 Sets the High Pass Filter of the center speaker. 2 Sets the High Pass Filter of the front speaker. 3 Sets the High Pass Filter of the rear speaker. 4 Sets the Low Pass Filter of the sub woofer. 5 Switches to the crossover setup screen. 6 Returns to the "SETUP Menu" screen. 2 Display the Crossover setup screen

1 Moves to the "SETUP System 2" screen. 2 Turns the key touch tone On or Off. ( "On") 3 Allows scrolling of text display on the Source Control screen. ( "Manual") "Auto": Scrolls the screen automatically. "Manual": Allows you to scroll the screen manually. 4 Selects a remote control signal. ( "On") When turned "Off", the remote control of TV reception is rejected. 5 Sets a music CD playback. ( "1") "1": Automatically recognizes and plays back an Audio file disc, a DVD or a music CD. "2": Forcibly plays back a disc as a music CD. Select "2" if you wish to play a music CD having a special format or if you cannot play a disc in the "1" position. 6 Returns to the "SETUP Menu" screen.
7 Returns to the "System SETUP 1" screen. 8 Sets the function of the [NAV] button. "V. OFF: Press the [NAV] button for more than 1 second to turn the display off. "R. CAM": Press the [NAV] button for more than 1 second to switch to rear view. 9 Sets whether using DSP function or not when playing DVD-Audio.*1 ( "On") "On": Uses DSP function when playing DVD-Audio. If the sampling frequency of the disc is greater than 48 kHz, it is fixed to 48 kHz. "Off": DSP fuction is not used in any source. p Returns to the "SETUP Menu" screen.
*1 The setting operation can be made only when in stanby source (when AV-Out setting of AV Interface Setup is set to other than DVD), and when in stop mode of DVD source.
You cannot play an Audio file/VCD disc in the "2" position. Also, you may not play some music CDs in the "2" position. Your setup is disabled when the disc is being played.

AV Interface Setup

You can set audio and visual (AV) interface parameters. 1 Display the AV Interface screen Touch Menu" screen (page 62). 2 Setup each item
1 Moves to the "AV Interface 2" screen. 2 Sets a name to be displayed when you select a system that is connected via the AV INPUT1 port. ( "VIDEO1") 3 Sets an image display of the system that is connected via the AV INPUT2 port. ( "Off") "Off": When the image source is switched, an image entered via the AV INPUT2 port is displayed. "On": When an image signal is entered via the AV INPUT2 port, this image is displayed. 4 Sets a name to be displayed when you select an image of the system that is connected via the AV INPUT2 port. ( "VIDEO2") 5 Selects a navigation system connection. ( "RGB") (DDX8022BT only) "RGB": Allows the Kenwoods Navigation System to connect via its interface cable. "AV-IN":Allows a third-party navigation system to connect via the AV INPUT1 port. "Off":Must be used if no navigation system is connected. (The navigation display is cancelled when the AV source is switched.) 6 Returns to the "SETUP Menu" screen.

1 Displays the Security code input screen. 2 Turns the SI function on or off. If turned "On", the burglar alarm lamp flashes when the vehicle ignition is off. ( "On") 3 Returns to the original screen. 2 Start Security Code setup
Normal picture mode ("Normal")
If you have already completed the code registration, you cannot touch [Set].

3 Enter a security Code

Input four-digit number.
4 Register your security code
If you have pressed the Reset button or if you have disconnected the Receiver from battery. 1 Enter the correct security code
5 Reenter the security code Reenter the same security code as that you have entered in Step 3 for confirmation.
If you enter a different security code, the screen returns to Step 3 (for the first code entry).
6 Register the security code again
You must enter the same security code as that you have entered in Step 3. 2 Enter the security code
Now, your security code is registered. If you press the Reset button or if you disconnect your receiver from the battery after the code registration, you need to enter the registered security code.
Now, you can use your Receiver.
If you enter an incorrect security code, you cannot use your Receiver for a while.
Incorrect entry count or more
Receiver inoperable time 5 minutes 1 hour 24 hours

TV Setup

The TV signal receiving areas can be set. (with the optional accessory TV Tuner connected only) 1 Displaying TV SETUP screen Touch Menu" screen (page 62). 2 Setting up TV

RDS Setup

You can set RDS related parameters. 1 Display the RDS Setup screen in the "SETUP Touch Menu" screen (page 62). 2 Setup each item
1 Moves to "TV2 Area Set" screen. 2 Sets the present TV1 receiving area. 3 Returns to the "SETUP Menu" screen.
1 Moves to "RDS SETUP 2" screen. 2 Sets a news bulletin interrupt time. 3 Turns the Alternative Frequency function On or Off. ( "On") 4 Turns the Region Restriction function On or Off. ( "On") 5 Turns the Auto TP Seek function On or Off. ( "On") 6 Returns to the "SETUP Menu" screen.

4 Returns to the "TV1 Area Set" screen. 5 Sets the present TV2 receiving area. 6 Returns to the "SETUP Menu" screen.
7 Returns to the "RDS SETUP 1" screen. 8 Selects a display language for the PTY function. 9 Returns to the "SETUP Menu" screen.

iPod Setup

Performs setup when using iPod. 1 Display the iPod SETUP screen Touch Menu" screen (page 62). 2 Setup each item

Bluetooth Setup

Registers and selects Bluetooth unit. 1 Display the Bluetooth Setup screen Touch Menu" screen (page 62). 2 Setup each item in the "SETUP
1 Sets the Audio book playback speed. 2 Sets Wide Screen on or off. 3 Returns to the "SETUP Menu" screen.
"Wide Screen" cannot be set while the iPod is connected.
1 Sets cell-phone for Hands Free and Audio player for Bluetooth Audio. 2 Sets the PIN code of this unit. 3 Returns to the "SETUP Menu" screen.
Registering Bluetooth Unit
Registers the Bluetooth unit to be connected. 1 Display the Connect Device List screen
4 Enter PIN code Enter the PIN code specified for the Bluetooth unit to register.
2 Search for a Bluetooth unit

w e r t

Enters a code number. Cancels registration of PIN code. Enters PIN code. Clears the code number.
1 Displays the registered Bluetooth unit. Displays the busy service in blue. Displays the available service in gray. 2 Scrolls the name of the Bluetooth unit. 3 Searches for Bluetooth unit. 4 Registers Bluetooth unit that cannot be registered by normal register (pairing) operation. 5 Returns to the previous screen.
You can also register from the Bluetooth unit side. For the PIN code necessary for registration, see <Registering Bluetooth Unit PIN Code> (page 83). If the error message appears even though the PIN code is correct, try <Registering Special Bluetooth Unit> (page 83).
A new device cannot be registered if there are 5 registered Bluetooth units. Delete unnecessary registration. See <Deleting Bluetooth Unit> (page 84).
3 Select the Bluetooth unit to register

p q 82

Displays the searched Bluetooth unit. Scrolls the name of the Bluetooth unit. Starts search. Cancels searching of Bluetooth unit. Scrolls. Returns to the previous screen.
Registering Bluetooth Unit PIN Code
Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side. 1 Display the Receiver PIN Code screen
Registering Special Bluetooth Unit
Registers Special Bluetooth unit that results in error by normal operation by selecting from model name. 1 Display the Special Device List screen

2 Enter PIN code

2 Select a model name
1 Displays the Bluetooth unit name that can be registered. 2 Scrolls the name of the Bluetooth unit. 3 Scrolls. 4 Returns to the previous screen. 3 Confirm whether to register

4 Recalls the memorized settings. 5 Memorizes the current Audio Setup and AV Interface settings.

English 85

Setup Menu 6 Clears the currently memorized settings. 7 Returns to "SETUP Memory" screen. 3 Memorize or recall the settings When memorizing the Audio Setup and AV Interface settings:

EXT SW Setup

Setting up power specification of the external device for which the power is controlled from this unit. 1 Display the EXT SW SETUP screen Touch Menu" screen (page 62). 2 Perform EXT SW Setup in the "SETUP
If settings have already been memorized, a confirmation message appears. Touch Yes. To cancel memorization, touch No. When recalling the memorized settings:
Setting EXT SW Control 1 (EXT SW1)
Touching the screen displays a confirmation message. Touch Yes. To cancel recalling, touch No. When clearing the currently memorized settings:
1 Sets the name of the external device. See <Character Entry> (page 48) for information on how to enter the name. 2 Sets the power signal output mode. ( EXT SW1: Pulse, EXT SW2: Level) Pulse: Generates a single power signal pulse.
Touching the screen displays a confirmation message. Touch Yes. To cancel clearing, touch No. 4 Quit memorization/recalling of settings
Level: Continues output of high power signal.
Sets to turn output on/off each time the button on the EXT SW Control screen is pressed. 3 Sets the Pulse signal output time. Outputs 500ms when "1" is set. Increases by 200ms with each step. Up to 100 steps can be set. 4 Returns to the original screen.
Setting EXT SW Control 2 (EXT SW2)
The setup method is the same as "EXT SW1".

Audio Control Menu

Displays the Audio Control menu to set the sound effect function of this unit. 1 Display the control screen of any source
You can adjust the front/rear and right/left audio balance. 1 Display Audio Control screen Touch in the "Audio Control Menu" screen (page 88). 2 Set the each item
Press several times until the control screen appears. 2 Display the Audio Control menu
3 Select the Audio Control item
1 Moves to the "Audio Control 2" screen. 2 Adjust the front/back and left/right volume around the touched area. 3 Adjusts the right and left volume balance. 4 Adjusts the front and rear volume balance. 5 Returns to the "Audio Control Menu" screen.
1 Switches to the selected Audio Control screen.
6 Returns to the "Audio Control 1" screen. 7 Adjusts the volume of the present source based on the difference level of original volume. 8 Adjusts the subwoofer volume. 9 Returns to the "Audio Control Menu" screen.

Disc source

? The specified disc does not play, but another

one plays instead.

The specified CD is quite dirty. Clean the CD. The disc is loaded in a different slot from that
! Cannot play audio files.
"CD Read" of <System Setup> (page 70) is set

to "2".

specified.
Eject the disc magazine and check the

! Cannot Folder select.

The Scan play or Random play function is
number for the specified disc.
The disc is severely scratched. Try another disc instead.

enabled.

! Cannot perform Repeat play.
The PBC function is enabled.

Audio file source

? The sound skips when an Audio file is being

played.

The media is scratched or dirty. Clean the media, referring to the CD
! Cannot set up the equalizer.
Cannot set up the crossover network. The Dual zone function is enabled. <Zone Control> (page 90)
cleaning of the section on <Handling discs> (page 6).
The recording condition is bad. Record the media again or use another

media.

Help? Error
When the unit fails to operate correctly, the cause of the failure appears on the display.
Protect : Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. Error 0767: The unit is not operating correctly due to some reason or other.
Push the unit's Reset button. If the "Error 0767" message does not disappear, see your nearest Kenwood dealer.
No Device (USB device)/Disconnected (iPod): The USB device/iPod is selected as a source although no USB device/iPod is connected.
Wire or insulate the speaker cord as appropriate and then push the Reset button.
Hot Error : When the internal temperature of this unit rises to 60C or more, the protection circuit is activated and you may not be able to operate the unit. At such times this message will appear.
Change the source to any source other than USB/iPod. Connect an USB device/iPod, and change the source to USB/iPod again.
No Music: The connected USB device contains no playable audio file. Media was played that doesnt have data recorded that the unit can play. USB Device Error!!: The connected USB device is rated a current capacity higher than the allowable limit.
Use the unit again after reducing the temperature inside the vehicle.
Hold Error : Activation of the protective circuit when the temperature inside the disc changer is higher than 60 degrees Celsius stops the disc changer from operating. At such times this message will appear.
Use when the temperature at the site where the disc changer has been fitted has dropped.
Mecha Error : The disc player is malfunctioning.

Check the USB device.

Some trouble may have occurred to the connected USB device.

doc1

GPS NAVIGATION SYSTEM

DNX8220BT DDX8022BT
MONITOR WITH DVD RECEIVER

INSTALLATION MANUAL

B54-4650-00/00 (EW/E2W)

Accessories

1..1 2..1 3..1 4..1 5..2 6..1 7

DNX8220BT only..1

DNX8220BT/DDX8022BT

Installation Procedure

1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the wire on the wiring harness. 4. Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. 5. Take Connector A on the wiring harness and connect it to the external power connector on your vehicle. 6. Connect the wiring harness connector to the unit. 7. Install the unit in your car. 8. Reconnect the - terminal of the battery. 9. Press the reset button.
If your vehicles ignition does not have an ACC position, or if the ignition wire is connected to a power source with constant voltage such as a battery wire, the power will not be linked with the ignition (i.e., it will not turn on and off along with the ignition). If you want to link the units power with the ignition, connect the ignition wire to a power source that can be turned on and off with the ignition key. Use a commercially available conversion connector if the connector does not fit in the vehicle connector. Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. If the console has a lid, make sure to install the unit so that the faceplate will not hit the lid when closing and opening. If the fuse blows, first make sure the wires arent touching to cause a short circuit, then replace the old fuse with one with the same rating. Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the - wires or ground them to any metal part in the car. After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. Mount the unit so that the mounting angle is 30 or less. This unit has the cooling fan (page 5) to decrease the internal temperature. Do not mount the unit in a place where the cooling fan of the unit are blocked. Blocking these openings will inhibit the cooling of the internal temperature and result in malfunction. Do not press hard on the panel surface when installing the unit to the vehicle. Otherwise scars, damage, or failure may result. Reception may drop if there are metal objects near the Bluetooth antenna.

2WARNING

If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.

Acquiring GPS Signals

The first time you turn on the DNX8220BT, you must wait while the system acquires satellite signals for the first time. This process could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall buildings and trees for fastest acquisition. After the system acquires satellites for the first time, it will acquire satellites quickly each time thereafter.

Mounting and wiring this product requires skills and experience. For safetys sake, leave the mounting and wiring work to professionals. Make sure to ground the unit to a negative 12V DC power supply. Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. If the power is not turned ON (PROTECT is displayed), the speaker wire may have a short-circuit or touched the chassis of the vehicle and the protection function may have been activated. Therefore, the speaker wire should be checked. Make sure that all wire connections are securely made by inserting jacks until they lock completely.

Bluetooth antenna unit

English |

Connection

Connector A
Ground wire (Black) Battery wire (Yellow) Ignition wire (Red) Antenna Cord FM/AM antenna input (JASO)

Connector B

(Orange/White)
Dimmer control wire (Orange/White)

ILLUMI

Connect to the vehicle's parking brake detection switch harness. Parking sensor wire (Light Green)

PRK SW

For the sake of safety, be sure to connect the parking sensor. Reveres sensor wire (Purple/White) Steering remote control input (Light Blue/Yellow) To steering remote To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required. When this terminal is not in use, leave its cap on.
Connect to vehicle's reverse lamp harness when using the optional rear view camera.
Connect to the terminal that is grounded when either the telephone rings or during conversation. To connect the Kenwood navigation system, consult your navigation manual. Connect either to the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle. To "EXT.AMP.CONT." terminal of the amplifier having the external amp control function.

Mute wire (Brown)

Power control/ Motor antenna control wire (Blue/White) External amplifier control wire (Pink/Black)
If no connections are made, do not let the cable come out from the tab.
Bluetooth Microphone (Accessory 9) (see page 10)

Cooling fan

GPS Antenna (Accessory 7) (DNX8220BT only) (see page 10)

FUSE ( 15A )

Accessory 1

REVERSE

REMO.CONT

ANT. CONT

P CONT

EXT.CONT

Connecting Wires to Terminals

Connector Function Guide

Pin Numbers for ISO Connectors External Power Connector A-4 A-5 A-6 A-7 A-8 Speaker Connector B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 Cable Colour Functions

2WARNING Connecting the ISO Connector
The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2, make the connection as illustrated. Please be sure to reconnect the cable as shown 2 below to install this unit to the Volkswagen vehicles etc.
Yellow Blue/White Orange/White Red Black
Battery Power Control Dimmer Ignition (ACC) Earth (Ground) Connection
Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black
Rear Right (+) Rear Right () Front Right (+) Front Right () Front Left (+) Front Left () Rear Left (+) Rear Left ()
1 (Default setting) The A-7 pin (red) of the vehicles ISO connector is linked with the ignition, and the A4 pin (yellow) is connected to the constant power supply.
Ignition cable (Red) Unit Battery cable (Yellow) A-7 Pin (Red) Vehicle A-4 Pin (Yellow)
2 The A-7 pin (red) of the vehicles ISO connector is connected to the constant power supply, and the A-4 pin (yellow) is linked to the ignition.

System Connection

USB terminal (iPod) USB terminal
USB device (commercially available) USB device (commercially available)
Visual input (iPod) Resistance-free mini plug Audio input (iPod) Resistance-free stereo type mini plug

Accessory 2

Accessory 3

Accessory 4

Audio/Visual Output Visual output (Yellow) Audio left output (White) Audio right output (Red) Audio/Visual input1 Visual input (Yellow) Audio left input (White) Audio right input (Red) Audio/Visual input2 Visual input (Yellow) Audio left input (White) Audio right input (Red) Rear View Camera Input Visual input (Yellow) Front Preout Audio left output (White) Audio right output (Red) Rear Preout Audio left output (White) Audio right output (Red) Subwoofer Preout Audio left output (White) Audio right output (Red) Center Preout Audio output (Black)

To Relay Box

RELAY 2

RELAY 1

CENTER

SUB WOOFER

REAR VIEW CAMERA

AV IN2

AV IN1

AV OUT

Optional Accessory Connection
iPod (commercially available)
KCA-iP300V (Optional Accessory)

Audio Output (Black)

Navigation System Input (DDX8022BT only)

Visual Output (Yellow)

USB terminal

USB terminal (iPod)

iPod cannot be connected. USB terminal
TV Tuner (Optional Accessory)

TV ANTENNA INPUT

Navigation System (Optional Accessory)
Connection cable (Included in the TV tuner) Connection cable (Included in the Navigation System)

TO MONITOR UNIT

Installation for Monitor/Player Unit
Firewall or metal support
Screw (M4X8) (commercially available)
Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw (commercially available) Metal mounting strap (commercially available)
Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip).
Installing the Escutcheon
1. Attach accessory 6 to the unit.

Accessory 6

Installing the GPS Antenna (DNX8220BT only)
GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals. To mount the GPS antenna inside your vehicle: 1. Clean your dashboard or other surface. 2. Peel the backing off of the adhesive on the bottom of the metal plate (accessory 8). 3. Press the metal plate (accessory 8) down firmly on your dashboard or other mounting surface. You can bend the metal plate (accessory 8) to conform to a curved surface, if necessary. 4. Place the GPS antenna (accessory 7) on top of the metal plate (accessory 8).
Installing the Microphone Unit
1. Check the installation position of the microphone (accessory 9). 2. Remove oil and other dirt from the installation surface. 3. Install the microphone. 4. Wire the microphone cable up to the hands-free box with it secured at several positions using tape or the like.

Accessory 9

Accessory 7

Accessory 8

Fix a cable with a commercial item of tape.
Depending on the type of car, reception of the GPS satellite signals might not be possible with an inside installation. The GPS antenna should be installed at a position that is spaced at least 12 inch (30 cm) from cellular phone or other transmitting antennas. Signals from the GPS satellite may be interfered with by these types of communication. Painting the GPS antenna with (metallic) paint may cause a drop in performance. Peel the release coated paper of double-face adhesive tape to fix on the place shown above.
Adjust the direction of the microphone to the driver. Install the microphone as far as possible from the cell-phone.
Removing Monitor/Player Unit
Removing the Hard Rubber Frame (escutcheon)
1. Engage the catch pins on the removal tool 5 and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure.

Accessory 5

Removing the Unit
1. Remove the hard rubber frame by referring to the removal procedure in the section <Removing the Hard Rubber Frame>. 2. Remove the Hex-head screw with integral washer (M4 8) on the back panel. 3. Insert the two removal tools 5 deeply into the slots on each side, as shown.

Catch Lock

The frame can be removed from the top side in the same manner.
2. When the lower level is removed, remove the upper two locations.
4. Lower the removal tool toward the bottom, and pull out the unit halfway while pressing towards the inside.
Be careful to avoid injury from the catch pins on the removal tool.
5. Pull the unit all the way out with your hands, being careful not to drop it.

 

Tags

B-2102 LAV51365 CMP5000WXJ Maxima-1997 917-272921 SGH-B520 BC 6 YPP35 GT2011J CDX-GT44IP Journey WF-T502A Nokia 5300 SC-HC40 F1DB104P XLT800-2002 XL200 DSC-W350 B VP201S JBL L820 1300 Niro RY41002A Wii FIT NV-GS280 USM16GL KX-TG1102CX FX-9860G SD Ptv-351 Plus Z1480 MD-MT90H UE-40B7000 DVD-5000 Edition CDE-7853R Artixscan 2020 SCX-4720FN-XAZ AC 23B Scpt70 DVP5996K RS-1506US 12470 W All-IN-ONE Episode 1 All-IN-ONE Asus MEB Sigma SRP-280 HF Horn CFD-S100L LA 3740 DX IV Mdk 2 Kx-ts105 Cuisinart LPP LC-90MK2 CFD-V10 LAC-M0510 Server 1900 Hy150 F-Z93 XD-Z84T SX-EA1 Digimax430 KX-TG6411 Dimage G400 LE32A551 DEH-P3600MPB Finepix F10 CQ-C1425N Office 25 Version 5 E-TEN M700 Dyson DC08 KX-T7633CE Forever 1500 Style RX1950 DCB-P850 Autometer VF SRW224G4 Review Malibu 1997 Decker 100 F5D8236ed4 KM-3530 Digital TX-10mkii V800H RE175 Notebook RHT-G800 M3540P TR810 MD-105TX KM-2050 100 IGO 3xi ML-7300AG IP8500 R-316FS

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101