Reviews & Opinions
Independent and trusted. Read before buy Kenwood DVF-J6050!

Kenwood DVF-J6050

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Kenwood DVF-J6050 Dvd Player, size: 1.6 MB
Related manuals
Kenwood DVF-J6050 Instruction Manual

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Kenwood DVF-J6050About Kenwood DVF-J6050
Here you can find all about Kenwood DVF-J6050 like manual and other informations. For example: review.

Kenwood DVF-J6050 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Kenwood DVF-J6050 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Kenwood DVF-J6050 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 1. Page 1 of 1. Average Rating:
nouse66 11:09am on Thursday, October 14th, 2010 
Advance Wars is a gaming masterpiece. I could just stop there but after playing it on and off for over 4 months.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

MULTIPLE DVD VCD CD PLAYER

DV-5900M

COMPACT

INSTRUCTION MANUAL

KENWOOD CORPORATION

DIGITAL VIDEO

DIGITAL AUDIO

DV-5050M DVF-J6050

COMPACT DIGITAL AUDIO
This instruction manual is for some models. Model availability and features (functions) may differ depending on the country and sales area.
B60-5105-CS (E M Y) AP 0105
0-1 Before applying power
Units are designed for operation as follows. U.S.A. and Canada. AC 120 V only Europe and U.K.. AC 230 V only Other countries.. AC 110-240 V
Caution : Read this page carefully to ensure safe operation. For the United Kingdom
Factory fitted moulded mains plug 1. The mains plug contains a fuse. For replacement, use only a 13-Amp ASTA-approved (BS1362) fuse. 2. The fuse cover must be refitted when replacing the fuse in the moulded plug. 3. Do not cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer. If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. IMPORTANT : The wires in the mains lead are colored in accordance with the following code: Blue : Neutral Brown : Live Do not connect those leads to the earth terminal of a three-pin plug.
0-2 Safety precautions WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN
The marking of products using lasers (For countries other than U.S.A., U.S.Military and Canada)

CLASS 1 LASER PRODUCT

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The marking this product has been classified as Class 1. It means that there is no danger of hazardous radiation outside the product. Location: Back panel
VISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED DANGEROUS VOLTAGE WITHIN THE PRODUCTS ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
Inside this laser product, a laser diode classified as Class 2 laser radiation is contained as alerted by the internal caution label shown above. Do not stare into beam. Location: DVD laser pick-up unit cover inside this product

0-3 Unpacking

Unpack the unit carefully and make sure that all the accessories are present. If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and packing materials in case you need to move or ship the unit in the future. Keep this manual handy for future reference.

0-4 Accessories

Standard remote control unit (1) Keyboard remote control unit (1) DV-5900M only
REMOTE CONTROL UNIT RC-KB2
Batteries (R6/AA) (2) (DV-5900M only)

Batteries (R03/AAA) (2)

Audio cables DV-5900M.. (3) DV-5050M/DVF-J6050.. (1)

Video cable (1)

S-Video cable (1)

Coaxial cable (1)

RS-232C cable (1)

System control cable (2)

For countries other than U.S.A., U.S.-Military, Canada, Europe and U.K.
AC plug adapter (1) Use to adapt the plug on the power cord to the shape of the wall outlet. (Accessory only for regions where use is necessary.)

0-5 Features

6-Channel Output Terminals (DV-5900M only) Compatible with DVD AUDIO, one of the latest digital audio formats (DV-5900M only) The DVD AUDIO reproduces 2-channel, 192 kHz, 24bit sampled digital audio or 6-channel, 96 kHz, 24bit sampled audio. This innovative technology has made possible audio reproduction in unprecedented high quality. Picture information and character information (ALBUM TEXT) are also provided. Versatile DVD VIDEO Functions The DVD VIDEO provides horizontal resolution of 430 lines, which exceeds that of DVD or S VHS video (400 lines) or laserdisc (430 lines). Multi-audio function: With DVD discs marked with the 8 icon, the desired language can be played back by selecting it from up to 8 languages. (The number of available languages is variable depending on the discs.) Multi-subtitle function: With DVD discs marked with the 32 icon, the subtitle language can be selected from up to 32 languages. (The number of subtitle languages is variable depending on the discs.) Angle function: With DVD discs marked with the icon, a single object can be viewed in up to angles by switching. (The number of available angles is variable depending on the discs.) Compatibility with Wide Range of Digital Surround Software The unit incorporates Dolby Digital decoder, DTS decoder, MPEG multi-channel decoder and Packed PCM decoder so that the users can enjoy the sound of real cinemas. The unit can also be connected to the user's existing TV set These output terminals can be connected to an amplifier with 6-channel input compatibility to enjoy high-bit, high-sampling rate multi-channel sound. DVD player with CD-R and CD-RW disc compatibility This DVD player can play back tracks recorded in CDR (Compact Disc Recordable) and CD-RW (Compact Disc Rewritable) as well as those in music CD. * Only finalized discs can be played back. MP3 file playback capabilities This DVD player can also play back the MP3 files which are the latest formats for storage of music data. 400-Disc mega changer The DVD mega changer accommodates 400 plus 3 discs, the largest number in the industry. Daisy chain connection Up to three units can be played, making it possible to play up to 1200 discs continuously. Progressive scanning (NTSC area only) The video projection method can be switched between Interlaced and Progressive scanning according to the area in which this unit is used. Two-side playback Double-sided DVD disc can be played back without the troublesome disc return operation. The played side of disc can simply be switched with a one-touch operation (DISC FLIP). Title input facility Character information such as the disc and track titles can be input on this unit. This instruction manual is for some models. Model availability and features (functions) may differ depending on the country and sales area. Keyboard remote control unit (DV-5900M only) This facilitates the title input operations. PLUS1 - PLUS3 slots The discs in these slots can be played or ejected with one-touch operation, without the need of designating the disc number. In addition, these slots are provided with wider areas around the grooves to facilitate insertion and ejection of discs. DVD control function (Except for Asia) The basic operations of this unit, such as playback and stop, can be remote controlled from the LCD remote control unit provided with a KENWOOD AV receiver.

Compressing MP3 files

Please set up the transfer bit rate setting for the compression software when compressing MP3 files as follows: MP3 file 128kbps recommended (32 kbps-320 kbps) This unit is compatible with 32kHz, 44.1kHz (recommended) and 48 kHz samplimg frequencies.

Additional information

Usable formats : ISO9660 level 1 (excluding expanded formats) Text display Both file and folder names are displayed in up 8 uppercase alphanumeric characters. Time display With a MP3 files, only the "Single Time" information is displayed. ID3-TAG infomation This unit is not compatible with this function. Digital output from MP3 files
Never add the MP3 extension logs to any files other than MP3 files. If the MP3 extension logs are added to any files other than MP3 files, the equipment will assume that they can be played back, and this will produce loud noises in the speakers, resulting in damage of adverse effects.
Check to ascertain that MP3 files can be played back correctly on the personal computer in use prior to saving them onto the media. Check to ensure that the saved file can be played back normally. It is not possible to confirm that files can be played back correctly while they are being saved onto the media. Ensure that the session is closed or finalized when data has been written on media. There are cases where media on which the session has not be closed or finalized will not be played back correctly with this equipment. There are cases were the folder names and file names will not be displayed correctly depending on the software used to save them. There are cases where playback is not possible when MP3 files (CD-ROM) and music CD information (CD-DA) are saved on the same media. When a disc contains a mixture of different formats such as the CD-DA and MP3, the data in the CDDA format will be played in priority.
Categorizing folders As MP3 files are compressed into high-quality sound files at an extremely high rate of compression, it is possible to record several times more tracks than audio CDs onto a single medium. It is therefore convenient to split the tracks into different folders by genre, artist or album for retrieval and repeat playback purposes. A maximum of 999 folders or a maximum of 999 files can be stored on a single media. There are cases where it is not possible to save folders in the desired sequence depending on the software being used.

S C A RT I N

SCART cable SCART cable
S C A RT I N T V S C A RT

INTERLACE PROGRESSIVE

Illust Model : DV-5900M COMPONENT VIDEO OUTPUT switch (NTSC Format only)
Select the scanning method of the Component Video output using the COMPONENT VIDEO OUTPUT switch on the rear panel.

DIGITAL

V C R S C A RT

DAISY CHAIN M I X LI N E

6 CH. INPUT

COMPONENT VIDEO

VCR etc.

INTERLACE

PROGRESSIVE
INTERLACE : Scanning method is fixed at interlaced scanning. PROGRESSIVE : When progressive scanning is unavailable with certain discs, the scanning method is switched automatically to interlaced scanning. When the unit is performing progressive scanning, PROGRESSIVE light in the display.

(PCM/BIT STREAM)

1-6 Connection of Audio Output
Do not insert the power cord plugs of the player and the connected components until all of the components have been connected. For details on the connection terminals and functions of the AV amplifier, refer to its instruction manual. The video output from the player should be connected directly to the AV amplifier. If the video output is connected through a VCR, the picture displayed on the TV may be disturbed due to the copy protect function.
For DV-5050M/DVF-J6050 DTS disclaimer clause When playing DTS-encoded (CDs, LDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD player is connected to an amplification system. To enjoy DTS Digital Surround playback, an external 5.1 channel DTS Digital Surround decoder system must be connected to the digital output (S/P DIF, AES/EBU, or TosLink) of the DVD player.
1-6-1 : 2-channel stereo connection
You can enjoy stereo sound if you connect the TV or system component that has 2channel stereo connection. DV-5900M Connect to the MIX LINE OUTPUT connectors. DV-5050M/DVF-J6050 Connect to the MIX LINE OUTPUT or AUDIO OUTPUT L/R connectors.

Chapter 3 Chapter 4

For DV-5900M

AUX IN L R

AUDIO IN L R

This chapter gives description on the basic operations of the control buttons on the player main unit and remote.
This chapter is composed of the following sections.
Configuration of Discs. Turning power on.. Inserting discs.. In regard to ALL DATA READ mode. Operation restriction according to the disc or player status.. Playing discs.. PLUS1 to PLUS3 slots.. Playing discs by changing them. Playing from the selected disc.. Playing discs by selecting the title, chapter, track or file... Skipping a track, chapter or file.. Stopping playback.. Still picture display and playback pause. Frame-by-frame advance.. Forward search and reverse search. Slow playback and reverse slow playback. What is the normal play TRACK mode?. Menu playback of DVD. Menu playback of P.B.C.-compatible VCD. Switching still pictures of DVD AUDIO.
Switching the sequential play mode. Repeat playback.. Switching the time display. Pure Audio function.. Switching the audio language.
3-2 Configuration of Discs
DVD AUDIO disc configuration (DV-5900M only) DVD AUDIO Group 1 Track 1

3-3 Turning power on

MP3 disc configuration MP3 Folder 1

Operation procedure

1. If preparation of the TV is required :

Group 2 Track 1 Folder 2

Set the input selector of the TV to monitor the video output from this unit. If preparation of the AV amplifier is required : Set the input selector of the AV amplifier to monitor the audio output from this unit.

File 1

File n+1

n+2 n+3 2

Index 1
2. Press the POWER button on the player.
Configuration of MP3 discs The folder is the storage unit at the highest level in the disc. Sometimes a single folder contains more than one file, or sometimes files are recorded directly in the disc in place of being included in a folder. Some discs also have a hierarchical structure in which a folder includes sub-folders. Note that the file numbers are not assigned on a per-folder basis but they are assigned consecutively for all the files in the whole disc. When the power of the player is in the standby mode, press the POWER button on the remote. When power is switched on, the unit starts detection of discs in the stocker (DETECTION is displayed during this). When discs have been detected, the unit automatically reads TOC on discs (READING is displayed during this) then starts playback. When no disc has been detected, the display shows NO DISC.
The group is the largest unit composing the music in an DVD AUDIO disc. Each group is composed of multiple tracks, and each track is composed of multiple indices.
DVD VIDEO disc configuration
DVD VIDEO Title 1 Chapter 1

Title 2 Chapter 1

The title is the largest unit composing the music and/or pictures in an DVD VIDEO disc. Each title is composed of multiple chapters.
[To put the player power in the standby mode] When the power is on, press the POWER button on the remote. The "STANDBY" indicator lights up to indicate that the player is in the standby mode of power. [To turn the player off] When the power is on or standby, press the POWER button on the player to turn it off.

3-21 Switching still pictures of DVD AUDIO (DV-5900M only)
When a DVD AUDIO (AOTT: Audio Only Title) disc containing the recording of still pictures is played, the still pictures can be displayed. (The operation may be restricted with certain discs.) To switch the still pictures, press the PAGE % or PAGE button on the remote during playback. Press the RETURN button to switch to the home still picture.

3-23 Repeat playback

1. Set the player to normal play mode (Track mode).
Set the player to stop mode.
Repeat playback allows you to play the desired audio or video repeatedly. Operation procedure Press the REPEAT button during playback to display the "MAIN" OSD. Each further press of the button switches the repeat icons as shown. q This function may be unavailable with certain discs. If the on-screen message or OSD is displayed outside the TV screen when using a widescreen TV or similar monitoring device, set the "OSD Position" setting to "Cinema". f When the player is set to the repeat play mode, the "REPEAT" indicator in the display lights up. The character information display also shows the repeat mode information for a few seconds. This operation is not available with a DVD with which the elapsed play time information is not displayed. Repeat playback may also be unavailable during P.B.C. playback of VCD.
2. Each press of SEQ. button switches the sequential
play mode of the player alternately. The SEQUENTIAL indicator lights. With a DVD AUDIO disc containing the recording of menu, menu playback is not available. With a P.B.C.-compatible VCD, playback is performed by switching P.B.C. automatically to off. When the sequential play mode is changed, "Sequential Off" or "Sequential On" is displayed on the TV screen.
Chapter 4 Chapter 6 Chapter 7 Chapter 8 Chapter 5
3-22 Switching the sequential play mode
The player is capable of sequential playback using the 400-disc stocker disc changer. If a DVD and/or VCD is mixed in the discs to be played sequentially, the sequential playback may stall in the middle while the menu remains displayed. In such a case, switch the sequential play mode of the player. Set the sequential play mode of the player to "Sequential On" using the remote as described below. The DVD VIDEO playback will be skipped in order not to interrupt the sequential playback. (The display shows "SKIP DVD-V" to indicate this.) (DV-5900M) (The display shows "SKIP DVD" to indicate this.) (Other) When playing a VCD with menu playback or playing a DVD VIDEO, set the sequential play mode of the player to "Sequential Off".

Chapter 6 Chapter 7

If you commit a mistake in the numeric button input, press the CLEAR button and restart the input from the beginning.

5-4 Random playback

5-3-2 Checking the program
The contents of the existing program can be checked or modified. Press the CHECK button during stop or playback. Each time the CHECK button is pressed, the program No. and the disc No. are displayed. Press each button within 20 seconds after pressing the previous button. Disc Random Playback Tracks in a desired disc can be played back in a random order. (Disc random playback is not available with DVD VIDEO, MP3 file.) All Disc Random Playback Tracks in all discs in the stocker can be played in a random order. (All random playback is not available with DVD VIDEO, MP3 file.) Set the player to stop mode If All Disc Random Playback is required, begin the procedure from step 3. Operation procedure
When the player enters the random mode, the "RANDOM" indicator in the display lights to indicate that the player is in the disc random mode. With ALL RANDOM playback, the discs that cannot be played in a random order, such as the DVD-VIDEO discs and discs containing MP3 files, are skipped and the next disc will be played.
5-4-1 Stopping random playback
Press the 7 button. The "RANDOM" indicator turns off.
5-3-3 To change a track in the program
Operation procedure (Enter stop mode before proceeding.)
1. Check that the player is in the normal play (TRACK

mode).

1. Press the CHECK button repeatedly until the program No, to be changed is displayed.
2. Perform steps 2 and 7 of Registering and playing

the program o

2. The disc number can also be selected using the DISC
SEL. and numeric buttons on the remote. The disc number can also be selected using the DISC + (up)/ (down) button on the remote. The disc number can also be selected by rotating the DISC knob on the front panel. The discs in the PLUS1 to PLUS3 slots cannot be played with random playback.
5-3-4 Clearing the program
One or all tracks in the existing program can be cleared. To clear a track from the program list : Press the CLEAR button. Each time the CLEAR button is pressed, the last track in the program is cleared. To exit the PGM : (Enter stop mode before proceeding.) Press the PGM button. The unit enters normal play mode (Track mode).

6. Press the ENTER button and repeat steps 4 and 5 for
mode. Set the player to stop mode.
2. Press the TITLE INPUT button.
When the TITLE INPUT button is pressed during TITLE INPUT mode, the TITLE INPUT mode is cancelled.
8. Press the 4, button to select the track number. 9. Press the SET button.

c : To change a title

The type of characters (capital letters or numbers/ symbols) is switched each time the CHARAC. button is pressed.

d : To delete a title

With the standard remote: Perform steps 1 to 5 of Assigning Title. With the keyboard remote: Perform steps 1 to 4 of Assigning Title.
Keyboard remote (DV-5900M only) To input a symbol, press and hold the SHIFT button while press the desired numeric/symbol button.
4. Press the ENTER button. 2. Press the cursor left, right button to move the cursor
3. Enter the title name using the character input buttons.
No character can be changed if 20 characters have already been input. In this case, delete unnecessary characters then enter the desired correction characters. If the title to be changed is too long to be displayed on the display section, press the cursor left/right button to scroll the display so that the characters hidden until then appear. A title name can be registered using up to 20 characters. If you commit a mistake in the character button input, press the DELETE button and restart the input from the beginning. Standard remote If a desired character is not provided on the remote control buttons, input the character as follows. Press the CHARAC. 4, (down/up) buttons or rotating the DISC knob on the main unit until the desired character is displayed in the flashing cursor position. Then, press the SET button.
6-5 Disc search (DISC SEARCH mode)
The convenient disc search function searches the desired disc in the changer for playback or ejection. When daisy chain connection is set, disc search covers all of the discs in the set changer units.
6-5-1 Disc search using the remote control unit a : Searching a disc by the disc title (CHARACTER SEARCH mode)
By inputting the initial letter of the desired disc title or artist name, discs which have the disc titles or the artist name beginning with that character can be searched in sequence. Check that the unit is in the normal play TRACK mode. Input the title.
5. Input the initial letter of the disc title or the disc artist to be searched. The initial letters of disc titles or disc artist are searched insensitively to the uppercase and lowercase. Lowercase characters cannot be input in the CHARACTER SEARCH mode. The disc titles or the disc artist beginning the specified character will be scrolled in the display. If a desired character is not provided on the remote control buttons, input the character as follows. Press the CHARAC. 4, (down/up) buttons or rotating the DISC knob on the main unit until the desired character is displayed in the flashing cursor position. Then, press the SET button. The type of characters (capital letters or numbers/ symbols) is switched each time the CHARAC. button is pressed.

Music Type Adult Contemporary
. Input the disc title for the searched disc. . Input the artist name for the searched disc.

Next 113

Prev 5 Medium Shose Small Shrts Large
When the LIBRARY button is pressed during USER FILE SEARCH mode, the USER FILE SEARCH mode is cancelled.
To input the character using OSD When 5 and are displayed on the top, the menu has more pages above or below the current page. When the cursor is located on the bottom edge, pressing the cursor down button makes it possible to advance to the next page. (When the cursor is located on the top edge, pressing the cursor up button makes it possible to return to the previous page.) Place the cursor on the Character button on the upper part of the OSD and press the ENTER button to start character search of the discs registered in the selected music type. When daisy chain connection is set, the set changer units can be switched using the MAIN, SUB 1 and SUB 2 buttons.
It is not possible to add or clear registration using the OSD. To quit MUSIC TYPE SEARCH mode Press the LIBRARY button.
2. Press the cursor up, down button to select User File
Search, then press the ENTER button.

User File

User File 1 : User File 2 : User File 3 : User File 4 :
User File 5 : User File 6 : User File 7 : User File 8 : All
All. This allows you to view all of the discs registered in all of the "User Files" registered in this unit. While a Disc search screen is displayed, pressing the cursor button toward "EXIT" allows the this mode to be canceled and pressing it toward "MENU" returns to the "MENU".
3. Press the cursor up, down button to select the desired user file and press the ENTER button. The discs corresponding the selected condition are displayed. If user file names have already been registered, their names are displayed. O Assigning user file names
Screen display showing that a disc is selected

User File : 2

Main Sub 1 Sub 2 Next 195 Prev 5 Character
Clear Green Nature Hyper Cool Blacks Fresh mint Skyblue
2. Press the cursor up/down button to select Disc or
Artist and press the ENTER button.

Next 195

Prev 5
To input the character using OSD
3. Press the cursor button to move the cursor on the
Main Sub 1 Sub 2 Next 142 Prev 5 Clear Green Hyper Cool Blacks Delete Fresh mint All Clear Character
It is not possible to add or clear registration using the OSD. To quit USER FILE SEARCH mode Press the LIBRARY button.

Setting Item Means

Select this position when speaker is incapable of reproduce audio below 100 Hz. Select this position when speaker is capable of reproduce audio below 100 Hz. No center channel output. Select when Center speaker is not used. Select this position when speaker is incapable of reproduce audio below 100 Hz. Select this position when speaker is capable of reproduce audio below 100 Hz.

Speaker

L ch front speaker

Initial Position

R R ch front speaker
a : Speaker Setting Custom
At the factory, the player has been set to the standard setting with which the speakers can reproduce the 6channel signals as soon as the connections are made. This setting can be changed according to each listening environment. When you want to change this setting, be sure to perform it in the listening area in your own listening environment. Operation procedure

C Center speaker

Off Size Center channel output ON/OFF Low cut filter Large Set delay time Delay Time Level See Delay Time Setting Normal
button and press the cursor up, down button to display the SOUND menu of SET UP MENU.

0/1.3/2.6/ 3.9/5.3

Set the volume level 0 to -12 dB No surround channel output. Select when Surround speaker is not used. Select this position when speaker is incapable of reproduce audio below 100 Hz. Select this position when speaker is capable of reproduce audio below 100 Hz. 0 ms Large 0 dB
2. Press the ENTER button to open the setup screen. 3. Press the cursor up, down button to select Speaker
Setting (Custom) in set up menu SOUND, then press the ENTER button.
L ch surround speaker Off

R ch surround speaker

Surround channel output ON/OFF Low cut filter
Large Set delay time Delay Time Level See Delay Time Setting

0/5.3/10.6/ 15.9

Set the volume level 0 to -12 dB 0 dB
Table : Speaker Setting CUSTOM Function & Setting (2/2)

Speaker Setting (Custom)

Test L SL C SW Exit R SR
Speaker Item Icon Speaker Icon

Function Item Function

Subwoofer channel output ON/OFF On Level Set the volume level
Select when Subwoofer is not used. Select when Subwoofer is used.

0 dB 0 ms

Subwoofer

SW SL SR

0 to -12 dB
4. Select the Speaker item (refer to the table on the right)
and press the ENTER button.
5. Select the Function item (refer to the table on the right)

8382 : Serbian 8385 : Sundanese 8386 : Swedish 8387 : Swahili 8465 : Tamil 8469 : Telugu 8471 : Tajik 8472 : Thai 8473 : Tigrinya 8475 : Turkmen 8476 : Tagalog 8479 : Tonga 8482 : Turkish 8484 : Tatar 8487 : Twi 8575 : Ukrainian 8582 : Urdu 8590 : Uzbek 8673 : Vietnamese 8679 : Volapk 8779 : Wolof 8872 : Xhosa 8979 : Yoruda 9072 : Chinese 9085 : Zulu
Chapter 2 Chapter 3 Chapter 4 Chapter 5 Chapter 6 Chapter 7 Chapter 8
Chapter 8 : Other Information
8-1 Malfunction of Microcomputer
This chapter is composed of the following sections. Malfunction of Microcomputer.. H To Be Noted.. J In case the microcomputer malfunctions, making operations impossible or showing wrong messages on the display even if you connected everything properly. When the microcomputer malfunctions, perform the following procedure to reset the microcomputer and return it to the normal condition. Operation procedure (Main unit) Troubleshooting... L Glossary.. Specifications...
1. While holding the USER FILE button on the main
unit, press the POWER button. The display on the main unit shows "INITIALIZE OK"(initializing).
2. Press the POWER button on the main unit to turn it
3. Press the POWER button again.
(STANDBY indicator lights)
4. Press the 3 button on the main unit.
The resetting clears the setups stored in the microcomputer and returns it to the factory-set initial condition. After resetting, you should perform the various setups of the player again from the beginning.

8-2 To Be Noted

Disc handling precautions Maintenance of the unit
When the front panel or case becomes dirty, wipe with a soft, dry cloth. Do not use thinner, benzine, alcohol, etc. for these agents may cause discoloration. Handling : Hold the disc so that you do not touch the playing surface. sticker

Caution on condensation

Condensation (of dew) may occur inside the unit when there is a great difference in temperature between this unit and the outside. This unit may not function properly if condensation occurs. In this case, leave the unit for a few hours and restart the operation after the condensation has dried up. Be specially cautious against condensation in the following circumstances: When this unit is carried from one place to another across a large difference in temperature, when the humidity in the room where this unit is installed increases, etc.
In regard to contact cleaner
Do not use contact cleaners because it could cause a malfunction. Be specially careful not to use contact cleaners containing oil, for they may deform the plastic component. Sticky paste Do not attach paper or tape to either the playing side or the label side of the discs.

Never play a cracked or warped disc
During playback, the disc rotates at high speed in the player. Therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent. Please do not use discs which are not round because they may cause malfunction.
Cleaning : If there are fingerprint marks or foreign matter found on the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner.
Transport or moving precautions
When transporting or moving the player, first remove the disc and observe the following procedure.

Disc accessories

The disc accessories (stabilizer, protection sheet, protection ring, etc.) which are marketed for improving the sound quality or protecting discs as well as the disc cleaner should not be used with this system because they may cause malfunction.
1. Turn the player power on. 2. If any disc is left in the player, eject all of the discs left
Storage : When a disc is not to be played for a long period of time, remove it from the player and store it in its case. in it.
3. Wait for a few seconds, until the display shows "NO

DISC".

Discs which can be played with this unit
DVD (12 cm), CD (12 cm), VCD, and the audio part of CDV, CD-G, CD-EG and CD-EXTRA. Use discs that comply with the IEC standard, for example a disc carrying the marking on the label surface.
4. Turn the player power off by pressing the POWER
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098, and 4,907,093 licensed for limited viewing uses only. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch the connection to the STANDARD DEFINITION output. If there are questions regarding our TV set compatibility with this model 525p DVD player, please contact our customer service center.
FCC WARNING (For the U.S.A.)
Manufactured under license from Dolby Laboratories. DOLBY and the double-D symbol are trademarks of Dolby Laboratories.

Audio language (DVD): Some DVDs contain the recording of multiple audio languages. This player allows the user to select desired one of the recorded audio languages during playback of such a DVD. Aspect ratio : The ratio between the horizontal and vertical sizes of picture displayed on a TV screen. The aspect ratio of ordinary TV is 4:3, and that of widescreen TV is 16:9. Pan & scan (DVD) : Method of displaying a horizontally-long picture recorded in 16:9 aspect ratio on a 4:3 TV screen by trimming part of picture. In general, the trimming positions for pan & scan are determined uniformly by the reproducing device. However, the pan & scan of DVD allows the software producer to specify the trimming positions to be used in playback. Letterbox (DVD) : Method of displaying a horizontallylong picture recorded in 16:9 aspect ratio on a 4:3 TV screen by attaching bands at the top and bottom of the screen and displaying the horizontally-long picture at the center of screen. Frame (DVD, VCD) : Each frame of a moving picture, that is displayed 30 times a second with NTSC and 25 times a second with PAL. These TV formats reproduce moving pictures by displaying still pictures sequentially. Field (DVD, VCD) : Part of a frame obtained by dividing the video data of each frame by two. Each frame of ordinary TV is constitute by displaying the fields alternately. Frame still/Field still (DVD, VCD) : Types of still pictures obtained by temporarily stopping a moving picture. The frame still picture may produce blur in the picture because it displays two specific fields alternately, but the picture quality is higher. The field still picture has lower picture quality because it uses half the picture information of frame still, but is not accompanies with picture blur.
IPB display (DVD) : With the MPEG2 which is one of the video display methods of DVD, each picture is divided into the following three picture types before being coded in digital signal. I-picture (Intra coded) : This is the standard video and can constitute a picture by itself. As the highest picture quality can be obtained, the still image of Ipicture is most suitable for use when adjusting the picture quality. P-picture (Predictive coded) : Picture calculated based on past pictures (I-picture or B-picture). B-picture (Bidirectionally predictive coded) : Picture calculated by comparing the previous and next pictures (I-pictures or P-pictures). This picture type contains least amount of video information. P.B.C. (PlayBack Control) (VCD) : VIDEO CDs carrying messages such as "Playback Control Capable" can be played interactively by selecting the desired play position or information in hierarchical structures while watching the menus displayed on the TV screen. OSD (On-Screen Display) : OSD is a method of interactive operations using the menus and icons displayed on the TV screen. On-Screen Message : Message displayed on the TV screen when an operation is performed. Downconversion : Conversion of PCM signal with high sampling rate such as 96 kHz and 192 kHz into a signal with a sampling rate of 48 kHz or 44.1 kHz. Dynamic range : Difference between the minimum reproducible audio signal and maximum reproducible audio signal.

Progressive scanning : This is a TV screen scanning method, which scans a screen in order of scanning lines from the first scanning line. It can reduce image flickering in still images containing characters, graphics and horizontal lines. Interlace scanning : This is a TV screen scanning method, which scans a screen by dividing it into two fields. It begins scanning with the odd number scanning lines then proceed to the scanning of even number scanning lines to display a single image by making use of the persistence of residual image. This method is applied in the previous TV formats. Multi Session : With CD recording, a session refers to an area composed of three recording areas including the lead-in area (which indicates the location of data), data area and lead-out (which indicates the end of session). A CD containing more than one session in a disc is referred to as a multi-session disc.

8-5 Specifications

[DV-5900M] Format section
Format.. DVD video ver. 1.1 / DVD audio ver.1.2 Laser.. Semiconductor laser

Video Section

Video output format.. NTSC Composite video output level. 1 Vp-p (75 ) S-video output level (Y-signal).. 1 Vp-p (75 ) (C-signal).. 0.286 Vp-p (75 ) Component video output level (Interlace/ Black Level Setup =7.5 IRE) (Y-signal).. 1 Vp-p (75 ) (CB-signal).. 0.68 Vp-p (75 ) (CR-signal).. 0.68 Vp-p (75 ) Video signal to noise ratio.. 65 dB Horizontal resolution.. 500 lines

Laser Section

Wavelength.. 643 ~ 683 nm (DVD play) Laser power class.. class 2 (IEC)

Audio section

Frequency response Sampling frequency: 44.1kHz (CD only)... 4 Hz ~20 kHz Sampling frequency: 96 kHz. 4 Hz ~ 44 kHz Sampling frequency: 192 kHz (DVD AUDIO only)... 4 Hz ~ 88 kHz Signal to noise ratio.. More than 120 dB Dynamic range.. More than 100 dB Total harmonic distortion.. Less than 0.003 % (1kHz) Channel separation. More than 95 dB (1kHz) Analog output level/impedance MIX LINE OUTPUT.. 2 V/ CH OUTPUT.. 2 V / 510 Digital output level/impedance COAXIAL... 0.5 Vp-p/ 75 OPTICAL (Wave length 660 nm).. -21 dBm ~ -15 dBm

General Section

Power consumption.. 40 W Dimensions.. W : 440 mm (17-5/16) H : 203 mm (8) D : 555 mm (21-20/17) Weight (net).. 10.4 kg (22.9 lb)
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. Sufficient performance may not be exhibited at extremely cold locations (Where water freezes).
[DV-5050M/DVF-J6050] Format section
Format... DVD video ver. 1.1 Laser.. Semiconductor laser
Video output format DV-5050M.. NTSC DVF-J6050 For Europe.. PAL/PAL60 For Asia.. NTSC/PAL For U.S. Military.. NTSC Composite video output level. 1 Vp-p (75 ) S-video output level (Y-signal).. 1 Vp-p (75 ) (C-signal).. 0.286 Vp-p (75 ) Component video output level [DV-5050M] (Interlace/ Black Level Setup =7.5 IRE) (Y-signal).. 1 Vp-p (75 ) (Cb-signal).. 0.68 Vp-p (75 ) (Cr-signal).. 0.68 Vp-p (75 ) [DVF-J6050 for Europe, U.S. Military and Asia] (Y-signal).. 1 Vp-p (75 ) (Cb-signal).. 0.7 Vp-p (75 ) (Cr-signal).. 0.7 Vp-p (75 ) Video signal to noise ratio.. 60 dB Horizontal resolution.. 500 lines

AUDIO VIDEO SURROUND RECEIVER
VR-906 VR-905 KRF-V6090D KRF-V5090D

INSTRUCTION MANUAL

KENWOOD CORPORATION
This instruction manual is for some models. Model availability and features (functions) may differ depending on the country and sales area.
About the supplied remote control
Compared to standard remote controls, the remote control supplied with this model has several operation modes. These modes enable the remote control to control other KENWOOD DVD players. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc.). Using the remote control without completely understanding its design and how to switch the operation modes may result in incorrect operations.

B60-5529-00 01

(K, P, Y)

05.2.16, 3:56 PM

Before applying the power
Units are designed for operation as follows. U.S.A. and Canada.. AC 120 V only Australia... AC 240 V only Europe and U.K.. AC 230 V only China and Russia.. AC 220 V only Other countries.. AC 110-120 / 220-240 V switchable*
Caution : Read this page carefully to ensure safe operation.

How to use this manual

This manual is divided into four sections, Preparations, Operations, Remote Control, and Additional Information.

Preparations

Shows you how to connect your audio and video components to this model and prepare the surround processor. Since this model works with all of your audio and video components, we will guide you in setting up your system to be as easy as possible.

* AC voltage selection

The AC voltage selector switch on the rear panel is set to the voltage that prevails in the area to which the unit is shipped. Before connecting the power cord to your AC outlet, make sure that the setting position of this switch matches your line voltage. If not, it must be set to your voltage in accordance with the following direction. AC voltage selector switch

AC 220240V~

Operations
Shows you how to operate the various functions available on this model.

Remote Control

Shows you how to operate other components using the remote control, as well as a detailed explanation of all remote control operations. Once you have setup the remote control, youll be able to operate both this model and your KENWOOD DVD player using the remote control supplied with this model.
Move switch lever to match your line voltage with a small screwdriver or other pointed tool.

Additional Information

AC 110120V~
Shows you additional information such as In case of difficulty (troubleshooting) and Specifications.

VOLTAGE SELECTOR

Unpacking
Unpack the unit carefully and make sure that all accessories are present. FM indoor antenna (1) For VR-906/ For KRF-V6090D/ VR-905 KRF-V5090D AM loop antenna (1)
Note : Our warranty does not cover damage caused by excessive line voltage due to improper setting of the AC voltage selector switch.

Names and functions of parts... 6
Main Unit.... 6 Remote control unit... 7
Setting up the system.. 8
Connecting a DVD player (6-channel input) (KRF-V6090D/KRF-V5090D only).. 9 Connecting a DVD player (VR-906/VR-905 only)... 9 Connecting audio components. 10 Connecting video components. 11 Connecting video components(COMPONENT VIDEO)... 12 Digital connections.. 13 Connecting the speakers.. 14 Connecting the terminals.. 15 Connecting the antennas.. 15
75us AM 10kHz FM100kHz 50us AM 9kHz FM50kHz
DE-EMPHASIS CHANNEL SPACE
Turn the power OFF by pressing the POWER key before moving the switch level. Move the switch lever to match your area with a small screwdriver or other pointed tool, then turn the power ON again.
Preparing for surround sound.. 16

Speaker settings... 16

Memory back up function

Normal playback... 18

Preparing for playback.. 18 Listening to a source component.. 19 Adjusting the sound... 19 Please note that the following items will be deleted from the unit's memory if the power cord is disconnected from the AC outlet for approximately 1 day. Power mode Input selector settings Picture output Speaker ON/OFF Volume level BASS, TREBLE, INPUT level TONE ON/OFF LOUDNESS ON/OFF ACTIVE EQ mode Dimmer level MD/TAPE settings Input mode setting Speaker settings Sound mode settings Distance setting Listen mode setting Broadcast band Frequency setting Preset stations Tuning mode

Recording... 20

Recording audio (analog sources). 20 Recording video.. 20 Recording audio (digital sources).. 20
Listening to radio broadcasts.. 21
Tuning radio stations.. 21 Presetting radio stations manually. 22 Receiving preset stations.. 22 Receiving preset stations in order (P.CALL). 22

Ambience effects.. 23

Surround modes... 23 Surround play... 25 DVD 6-channel playback (KRF-V6090D/KRFV5090D only).. 26 Convenient functions.. 27
Basic remote control operations for KENWOOD DVD players.. 29
DVD player operation keys.. 29
In case of difficulty.. 30 Specifications.. 32

3 04.11.25, 18:54

Preparing the remote control

Loading the batteries

1 Remove the cover. 2 Insert the batteries.
For the U.S.A. FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

4 04.11.25, 18:54

Special features

True home theater sound

This model incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software. Select a surround mode according to your equipment or the software you are going to play and enjoy!

DSP surround modes

The DSP (Digital Signal Processor) used for this model incorporates a variety of high quality adjustable sound fields, like ARENA, JAZZ CLUB, THEATER, STADIUM and DISCO. It is compatible with almost any kind of program source.
Dolby Digital and Dolby Digital EX
The DOLBY DIGITAL mode lets you enjoy full digital surround from software processed in the Dolby Digital format. Dolby Digital provides up to 5.1 channels of independent digital audio for better sound quality and more powerful presence than conventional Dolby Surround. As for Dolby Digital EX, it creates six full-bandwidth output channels from the 5.1 channel sources. This is done using a matrix decoder that derives three surround channels from the two in the original recording. For best result, Dolby Digital EX should be used with movie soundtracks recorded with Dolby Digital Surround EX.
DVD 6-channel input (KRF-V6090D/KRF-V5090D only)
If you own a DVD player equipped with 6-channel output, this model allows you to obtain the full surround sound impact of DVD source material featuring multi-channel encoding. Since the source signals are digital and each channel is input independently, the resulting ambience is far superior to what can be achieved with conventional surround sound systems.

ACTIVE EQ

ACTIVE EQ mode will produce a more dynamic sound quality in any condition. You can enjoy a more impressive sound effect when ACTIVE EQ is turned on.
Dolby PRO LOGIC IIx and Dolby PRO LOGIC II
DOLBY PRO LOGIC II, whilst totally compatible with its predecessor PRO LOGIC, provides greater advantages in surround sound. It allows user to enjoy the conventional stereo or Dolby Surround with a convincing 5.1 like presentation. PRO LOGIC II offers special features for controlling the overall spatial, dimensionality and frontal sound field imaging. PRO LOGIC II produces an impressive surround sound from video software marked and three-dimensional space from music CD. When listening to music, you will be able to enjoy the experience of sheer STEREO surround sound. DOLBY PRO LOGIC IIx enhanced DOLBY PRO LOGIC IIs features. It creates 6.1 channel and 7.1 channel surround sound from stereo or 5.1 channel signals. This feature provides you an astonishing ambience effect which makes you feel you are surrounded by natural sound. Especially 7.1 channel surround sound can produce real back sound from Surround Back speakers.

OUT Cassette deck or MD recorder

CD or DVD player

OUT Other component
Be sure to adhere to the following, or proper ventilation will be blocked causing damage or fire hazard. Do not place any object impairing heat radiation onto the top of the unit. Leave a space around the unit (from the largest outside dimension including projection) equal or greater than, shown below. Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm

10 04.11.25, 18:56

Connecting video components

About the S-VIDEO jacks

S-VIDEO
S-VIDEO jacks (For KRF-V6090D)
VIDEO 2 IN DVD IN MONITOR OUT
Use the S-VIDEO jacks to make connections to video components with S-VIDEO IN/OUT jacks.

If you use the S-VIDEO

jacks to connect your video playback components, be sure to use the S-VIDEO jacks when connecting your monitor and video recording components.
* DVD IN input jack is used for either CD/DVD input or DVD input (VR-906/VR-905) or DVD/ 6CH input (KRF-V6090D/KRFV5090D).

DVD IN VIDEO 2 IN

MONITOR OUT

VIDEO 1 IN

VIDEO 1 OUT
REC OUT PLAY IN PLAY IN VIDEO 1 VIDEO 2

Video IN

Monitor TV

OUT Video deck Video

OUT Audio

Video OUT

DVD player or LD player

Audio OUT

A video component with digital audio outputs should be connected to the VIDEO 2 jacks.

11 04.11.25, 18:56

Connecting video components (COMPONENT VIDEO) (Except for VR-905)
If you have connected this model to a video component with COMPONENT jacks, you can get a better picture quality than by connecting to the S-VIDEO jacks.
* DVD IN input jack is used for either CD/DVD input or DVD input.
COMPONENT VIDEO VIDEO 2 IN

CB DVD IN

CB CR MONITOR OUT
REC OUT PLAY IN REC OUT PLAY IN PLAY IN MD / TAPE VIDEO 1 VIDEO 2
Audio OUT Video OUT DVD player

DVD player or LD player Video OUT Audio OUT
When connecting the TV to the COMPONENT jacks, be sure to connect all the other components to the COMPONENT jacks.

12 04.11.25, 18:56

Digital connections
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD) format digital signals. If you have connected any digital components to this model, be sure to read the Input mode settings section carefully. 8

OPTICAL CD / DVD

*VR-906/VR-905
OPTICAL DIGITAL OUT (AUDIO) Optical fiber cable
COAXIAL DIGITAL OUT (AUDIO) Component with DTS, Dolby Digital, or PCM COAXIAL DIGITAL OUT Connect the video signal and analog audio signals to the VIDEO 2 jacks. (See Connecting video components.) !
COAXIAL DIGITAL OUT (AUDIO) RF digital demodulator (Commercially available)
DOLBY DIGITAL RF OUT (AUDIO)

PCM OUT LD player

To connect an LD player with a DIGITAL RF OUT, connect the LD player to the RF digital demodulator (Commercially available). Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of this model. Connect the video signal and analog audio signals to the VIDEO 2 jacks. (See Connecting video components.)

13 04.11.25, 18:56

Connecting the speakers
Front Speakers Right Left Surround Back Speakers Left Right

VR-906/KRF-V6090D

Surround Back Speaker

Center Speaker

Power amplifier Power amplifier
* VR-906/KRF-V6090D: SURR BACK L

/SURR BACK

SURR BACK L /SURR BACK

CENTER

SURR BACK L*

+ SURR BACK R

GREEN SPEAKERS (8

PRE OUT

VR-906/ KRF-V6090D only When using both Surround Back Left and Right speakers, select PRE OUT at speaker settings. &

SURR BACK R PRE OUT

When connecting a single Surround Back speaker through a power amplifier to PRE OUT jack, connect it as above and select SPEAKER at speaker settings. &

ANTENNA

VR-906/ VR-905
KRF-V6090D/ KRF-V5090D AM loop antenna FM outdoor antenna
Use an antenna adapter (Commercially available)

15 04.11.25, 18:56

Preparing for surround sound

Speaker settings

To enable you to obtain optimum enjoyment from this models listening modes, make sure to complete the speaker settings (Subwoofer, Front, Center, Surround and Surround Back speakers) as described below.
3 Select a speaker system.
1 Select SP SETUP and press the SETUP key again so that the speaker system indication SP SYSTEM scrolls across the display.
POWER ON/STANDBY (KRF-V6090D/ ON/STANDBY
(VR-906/VR-905) KRF-V5090D)
2 Use the MULTI CONTROL knob or MULTI CONTROL %/ keys to select the speaker system setting. 1 CUSTOM : For general speakers. 2 FULL RANGE : For selected KENWOOD speaker - for example, KS-2200HT, KS-4200EX. 3 2WAY 2SPKR : For selected KENWOOD speaker for example, KS-3200HT, KS-3200EX, KS-5200HT, KS-5200EX, KS-7200HT. 4 2WAY 3SPKR : For selected KENWOOD speaker for example, KS-8200HT, KS-8200EX. The selection of FULL RANGE, 2WAY 2SPKR or 2WAY 3SPKR should only be used with 6 channels speaker system setting. When the setting FULL RANGE, 2WAY 2SPKR or 2WAY 3SPKR is selected, the procedure skips to step 4. 3 For general speaker setting, use the MULTI CONTROL knob or MULTI CONTROL %/ keys to select CUSTOM and press the SETUP key again. The Subwoofer setting indication SUBW ON appears.

(KRF-V6090D/KRF-V5090D)

POWER ON/OFF
SETUP RECEIVER SETUP MULTI CONTROL
1 Turn on the power to this model by pressing POWER ON/
STANDBY STANDBY key. (for VR-906/VR-905) or POWER ON/OFF and ON/ (for KRF-V6090D/KRF-V5090D) or RECEIVER
4 Use the MULTI CONTROL knob or MULTI CONTROL %/ keys to select the appropriate Subwoofer setting. 1 SUBW ON : Subwoofer setting mode to this model is ON. 2 SUBW OFF : Subwoofer setting mode to this model is OFF. The initial setting is SUBW ON. When the setting SUBW OFF is selected, the front speakers are automatically set to FRNT LRG and the procedure skips to step 7. Before step 7, press the SETUP key to accept the setting. When Subwoofer output sound is required, select FRNT NML. 5 Press the SETUP key to accept the setting. The Front speakers setting indication FRNT LRG appears.
If you want to use the remote control unit, press the TUNER, MD/ TAPE, VIDEO 1, VIDEO 2 or AUX key on the remote control unit to set it to the receiver control mode.
2 Press the SETUP key to enter the SETUP mode and use the

1 Use the INPUT SELECTOR knob to select the source (CD/DVD, DVD/6CH (KRF-V6090D/KRF-V5090D), DVD (VR-906/VR-905) or VIDEO2) you want to record. 2 Set the MD or TAPE recorder to record.
3 Use the VOLUME CONTROL knob or VOLUME %/ keys to adjust the volume.

20 04.11.25, 19:02

3 Press and hold the DIMMER key for more than 2 seconds to select the A-REC or M-REC mode during digital input. 1 Rec mode off : The digital input record mode is switched off. 2 A-REC mode : The digital input signals (DTS, Dolby Digital, or PCM) are identified automatically and converted into stereo signals that are ready for recording. 3 M-REC mode : The input signal type at the moment this mode is selected is held throughout this mode. When the M-REC mode is selected, the digital input signal is converted to stereo signals (down-mix). But once the digital signal is changed to other signal, no signal is output. When the A-REC mode is selected, the digital input signal is converted to stereo signals even if the digital signal is changed. For A-REC mode:
Listening to radio broadcasts
This model can store up to 40 stations in the memory and recall them by one-touch operation.

Tuning radio stations

MULTI CONTROL BAND AUTO/MONO TUNING 1 /

For M-REC mode:

1 Use the INPUT SELECTOR knob or TUNER key to select the

tuner.

2 Use the BAND key to select the desired broadcast band.
Each press switches the band as follows: 1 FM 2 AM AM or FM indicator appears in the display
4 Start playback, then start recording. If the audio reproduction stops in the middle due to change in the input signals, etc., press the DIMMER key.
3 Use the AUTO/MONO key to select the desired tuning method.
Each press switches the tuning method as follows: 1 AUTO lit (auto tuning) 2 AUTO not lit (manual tuning) AUTO indicator lights up in the display.
Normally, set to AUTO (auto tuning). If the radio waves are weak and there is a lot of interference, switch to manual tuning. (With manual tuning, stereo broadcasts will be received in monaural.)
4 Use the MULTI CONTROL knob or MULTI CONTROL %/ keys,
or TUNING 1 / keys to select the station.
ST. lights when a broadcast is being received in stereo. Frequency display
TUNED is displayed when a station is received. Auto tuning : The next station is tuned automatically. Manual tuning : Turn the knob (press the key) to select the desired station.

21 04.11.25, 19:02

Presetting radio stations manually

MEMORY

Receiving preset stations in order (P.CALL)

P.CALL 4/

1 Tune to the station you want to store. 2 Press the MEMORY key while receiving the station.

Blinks for 20 seconds

1 Press the TUNER key to select tuner as the source. 2 Use the P.CALL 4 keys to select the desired station.

Neo:6 is a new technology which was developed by DTS. It can produce high grade 6 channels surround with an astonishing fidelity from 2 channels content. Neo:6 has 2 modes, CINEMA mode is for movie playback and MUSIC mode is for music playback. DTS has a.1 or LFE channel. The indication LFE appears in the display when a signal is being input for this channel.
The DTS multi-channel audio format is available on CD, LD and DVD software. DTS is a strictly digital format and cannot be decoded inside most CD, LD or DVD players. For this reason, if you attempt to listen to DTS encoded software through the analog output of your new CD, LD or DVD player, you will experience digital noise in most cases. This noise can be quite loud if the analog output is connected directly to a high power amplification system. Proper measures for playing the digital output as described below should be taken to avoid this situation. To enjoy DTS Digital Surround playback, an external 5.1 channel DTS Digital Surround decoder system or an amplifier with a built-in DTS Digital Surround decoder must be connected to the digital output (S/P DIF, AES/EBU or TosLink) of a CD, LD or DVD player. All models are incorporated with the DTS decoder. DTS has a.1 or LFE channel. The indication LFE appears in the display when a signal is being input for this channel.
Dolby Pro Logic II was designed specifically to provide a new sense of spatiality, directionality and articulation of sounds from Dolby Surround encoded sources (such as video and Laserdisc software marked ). This is achieved with an intelligent, built-in feedback logic design, a matrix surround decoding and the decoding of stereo, full bandwidth surround outputs. DOLBY PRO LOGIC IIx enhanced DOLBY PRO LOGIC IIs features. It creates 6.1 channel and 7.1 channel surround sound from stereo or 5.1 channel signals. This feature provides you an astonishing ambience effect which makes you feel you are surrounded by natural sound. Especially 7.1 channel surround sound can produce real back sound from Surround Back speakers. The PRO LOGIC IIx modes programmed into this model are MOVIE, MUSIC and GAME. The PRO LOGIC II modes programmed into this model are MOVIE, MUSIC, GAME and PRO LOGIC. The MOVIE mode has preset characteristics to produce a calibrated, high-level surround sound playback while the MUSIC mode has user-adjustable characteristics to offer the three optional controls, like Dimension, Center Width and Panorama modes to allow optimization of the soundfields as desired. The Dimension control allows the user to gradually adjust the soundfield either towards the front or towards the rear; the Center Width control allows various adjustment of the left-center-right speakers balance; the Panorama mode extends the front stereo image to include the surround speakers for an exciting wraparound effect with side wall imaging. The GAME mode provides surrounded and exciting sound when you enjoy game or TV. Especially in PRO LOGIC IIx GAME mode, base sound not only from Front and Center but also from Surround channel is added to Subwoofer. This provides even more dynamic surround effects.

DSP mode

The DSP mode lets you add the atmosphere of a live concert or hall to almost any type of program source. These modes are particularly effective when used with stereo program sources, like CD, television, and FM radio. You might enjoy trying the ARENA, JAZZ CLUB, THEATER, STADIUM or DISCO mode the next time you watch a concert or sporting event!

What's DSP?

DSP stands for Digital Signal Processor. The way a sound is heard in an actual environment depends on a variety of different factors. One of the most important is reverberation (the act of decaying elements of sound echoing in various places). The DSP modes produce the feeling of presence by using the DSP to create reverberation, without spoiling the sound quality of the original signal.
DVD 6-channel mode (KRF-V6090D/KRF-V5090D only)
Using a DVD player or the like equipped with six (5.1) output channels and this model, you can enjoy multi-channel encoded DVD source material in all its splendor. Since the source signals are digital and each channel is input independently, the resulting sound quality, sense of spaciousness, and dynamic range are superb. The indication 6CH INPUT appears in the display when a signal is being input for this channel.

24 04.11.25, 8:02 PM

Surround play
When the DOLBY DIGITAL or DOLBY DIGITAL EX signal is input:
The DTS compatible models can reproduce a CD, DVD, or LD carrying the DTS mark. DOLBY DIGITAL can be used when playing DVD or LD software bearing the mark and DOLBY DIGITAL format digital broadcasts (etc.). DOLBY PRO LOGIC can be used when playing video, DVD, or LD mark. software bearing the (The DOLBY DIGITAL or PRO LOGIC indicator lights up.) : DOLBY DIGITAL surround. (The DOLBY DIGITAL indicator lights up.) 2 DOLBY DIGITAL EX : DOLBY DIGITAL EX surround. (The DOLBY DIGITAL EX indicator lights up.) 3 PL IIx MOVIE : PRO LOGIC IIx surround MOVIE mode. (The PRO LOGIC indicator lights up.) 4 PL IIx MUSIC : PRO LOGIC IIx surround MUSIC mode. (The PRO LOGIC indicator lights up.) 5 PL IIx GAME : PRO LOGIC IIx surround GAME mode. (The PRO LOGIC indicator lights up.) 6 PL II MOVIE : PRO LOGIC II surround MOVIE mode. (The PRO LOGIC indicator lights up.) 7 PL II MUSIC : PRO LOGIC II surround MUSIC mode. (The PRO LOGIC indicator lights up.) 8 PL II GAME : PRO LOGIC II surround GAME mode. (The PRO LOGIC indicator lights up.) 9 PRO LOGIC : PRO LOGIC II surround PRO LOGIC mode. (The PRO LOGIC indicator lights up.) 0 STEREO : Normal stereo playback. When you select DOLBY DIGITAL DOLBY DIGITAL will scroll from right to left. 1 DOLBY DIGITAL
INPUT MODE Input Selector
When the DTS or DTS-ES (matrix, discrete or bitstream) signal is input: Preparations
Turn ON related components. Complete Preparing for surround sound (speaker settings).^ Use the INPUT SELECTOR knob or Input Selector keys to select the component you wish to play back with surround sound. Use the INPUT MODE key to select the input mode (analog or digital) for the source you wish to playback. 8 Noise will be produced when a DTS source is played by selecting the analog input. (The DTS LED indicator lights up.) 1 DTS-ES MATRIX 6.1 : DTS-ES MATRIX 6.1 channel surround mode. (The DTS-ES and MATRIX 6.1 indicators light up.) DTS-ES DISCRETE 6.1 : DTS-ES DISCRETE 6.1channel surround mode.(The DTS-ES and DISCRETE 6.1 indicators light up.) DTS : DTS 5.1 ch surround mode (The DTS indicator lights up.) DTS + NEO:6 CINEMA : DTS + NEO:6 surround CINEMA mode. (The DTS and NEO:6 indicators light up.) STEREO : Normal stereo playback

1 Start playing the video software. 2 Press the LISTEN MODE key to select the listening mode.
The listening mode settings are stored separately for each input. If the input mode is set to full auto (AUTO DETECT lights), this model selects the optimal listening mode automatically based on the type of input signal and the speaker settings. Each press of the LISTEN MODE key switches the setting as listed. The listening mode settings are different depending on the type of input signal. Dolby Digital Surround EX compliant disc : Dolby Digital Surround EX compliant disc contains the identification signals. When you choose FULL AUTO during Input mode setting(8), this amplifier detects the identification signals and change the Listen mode to the DOLBY DIGITAL EX (Dolby Digital Surround EX mode) automatically. But sometimes we find some discs which are Dolby Digital Surround EX compliant disc but it does not contain the identification signals. If you find the notice like Surround EX on the label of disc or package, you can choose DOLBY DIGITAL EX then you can enjoy Dolby Digital Surround EX sound.
When the analog signal or the digital signal (except for DOLBY DIGITAL or DTS signal) is input:
:PRO LOGIC IIx surround MOVIE mode. (The PRO LOGIC indicator lights up.) 2 PL IIx MUSIC :PRO LOGIC IIx surround MUSIC mode. (The PRO LOGIC indicator lights up.) 3 PL IIx GAME : PRO LOGIC IIx surround GAME mode. (The PRO LOGIC indicator lights up.) 4 PL II MOVIE : PRO LOGIC II surround MOVIE mode. (The PRO LOGIC indicator lights up.) 5 PL II MUSIC : PRO LOGIC II surround MUSIC mode. (The PRO LOGIC indicator lights up.) 6 PL II GAME : PRO LOGIC II surround GAME mode. (The PRO LOGIC indicator lights up.) 7 PRO LOGIC : PRO LOGIC II surround PRO LOGIC mode. (The PRO LOGIC indicator lights up.) 8 NEO:6 CINEMA : NEO:6 surround CINEMA mode. (The NEO:6 indicator lights up.) 9 NEO:6 MUSIC : NEO:6 surround MUSIC mode. (The NEO:6 indicator lights up.) 0 ARENA : DSP Surround ARENA mode. - JAZZ CLUB : DSP Surround JAZZ CLUB mode. 1 PL IIx MOVIE

Continued to next page

25 04.11.25, 8:03 PM
= ~ ! @ THEATER STADIUM DISCO STEREO : : : : DSP Surround THEATER mode. DSP Surround STADIUM mode. DSP Surround DISCO mode. Normal stereo playback.
DVD 6-channel playback (KRF-V6090D/KRF-V5090D only)
Using a DVD player or the like equipped with six (5.1) output channels and this model, you can enjoy surround sound playback. Connecting a DVD player which can decode the surround signal itself is also acceptable.

DVD player operation keys You can perform these basic operations using the keys described below when connected to KENWOOD DVD player.

Numeric keys

SET UP

DIMMER TOP MENU

LISTEN MODE ACTIVE EQ MULTI CONTROL
ENTER %(Cursor ) (Cursor ) #(Cursor \) @(Cursor |) RETURN 8 (Pause) 6 (3 Play) 7 (Stop) 4 (Skip) (Skip)

RETURN BAND ENTER

ON SCREEN

1 (Search) (Search)

BASS BOOST LOUDNESS DISC SEL. DISC SKIP

DISC SEL. DISC SKIP

AUDIO SUBTITLE

REPEAT ANGLE

29 05.2.16, 4:28 PM

In case of difficulty

Resetting the Microcomputer
The microcomputer may malfunction (unit cannot be operated, or shows an erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor. If this happens, execute the following procedure to reset the microcomputer and return the unit to its normal operating condition. Please note that resetting the microcomputer will clear the contents of the memory and return the unit to the state it was in when it left the factory.
For the U.S.A. and Canada Unplug the power cord from the wall outlet, then plug it back in while holding down the POWER ON/STANDBY key. For other countries With the power cord plugged in, turn the POWER ON/ OFF key OFF. Then, while holding down the ON/STANDBY key, press POWER ON/OFF key.

Amplifier

Symptom No sound from the speakers. Cause The speaker cords are disconnected. VOLUME is set to the minimum position. MUTE is ON. The SPEAKERS switches are set to OFF. The standby indicator blinks and sound is not output. Sound is not output from one of the speakers. Speaker cords are short-circuited. Remedy Connect them properly referring to Connecting the speakers. $ Adjust the volume to a proper level. Turn OFF the MUTE. ) Set the SPEAKERS switch to ON. * Turn the power off, eliminate the shortcircuiting, then turn on the power again. Connect it properly referring to Connecting the speakers. $ Set it up properly referring to Speaker settings. ^ Connect it properly referring to Connecting the speakers. $ Set it up properly referring to Speaker settings. ^ Select a surround mode. Adjust the speaker levels using the test tone. & Set the input mode to digital manual before starting playback of the Dolby Digital source. 8 Press the INPUT MODE key to select to full auto mode. 8 Copy-guarded video software cannot be recorded.
The speaker cord is disconnected. The speaker is not set up correctly.

AM tuner section

Tuning frequency range 10 kHz step (VR-906-VR-905). 530 kHz ~ 1,700 kHz 10 kHz step (KRF-V6090D/KRF-V5090D). 530 kHz ~ 1,610 kHz 9 kHz step (KRF-V6090D/KRF-V5090D). 531 kHz ~ 1,602 kHz Usable sensitivity (30% mod., S/N 20 dB) (VR-906/VR-905).. 16 V / (600 V/m) Usable sensitivity (KRF-V6090D/KRF-V5090D). 16 V / (600 V/m) Signal to noise ratio (30% mod. 1 mV input)... 50 dB (60 dBV EMF input)

GENERAL

Power consumption VR-906/VR-905... 2.2 A KRF-V6090D/KRF-V5090D.. 280 W Standby Power consumption VR-906/VR-905.. less than 0.4 W KRF-V6090D/KRF-V5090D.. less than 1.3 W AC outlet SWITCHED VR-906/VR-905.. (total 150 W, 1.25 A max.) KRF-V6090D/KRF-V5090D.. (total 90 W max.) Dimensions.. W :. 440 mm (17-5/16") H : 143 mm (5-5/8") D : 303 mm (11-15/16") Weight (Net) VR-906/VR-905... 7.7 kg (17.0 lb) KRF-V6090D/KRF-V5090D.. 8.8 kg (19.4 lb)
Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product. Model_____________________ Serial Number_____________________

32 04.11.26, 5:34 PM

 

Tags

R-323NX VGN-NR32s S PCG-R600hfpd IAD 81 Calligraphy 2 Empires Classic 220 Tensei-nocturne P7V800-M AJ-D215 MIL DOT 2040U GZ-MG36 VGN-FZ31E CDX-GT210 Cabriolet VP-700 LE32A465c1W DCS-202K Machine UE-40B8000XW CDX-CA600 Watch E81 A100A LE46B650 Laserjet 1020 C 420 DIR-825 LE-26S81B Majesty250-2002 Autocad MEP Gpsmap 478 Messenger EW1247W TX-32LX60FA AQ12nsan HFC141-05 300 XC KF350-2 Reverb CDX-555RF RY43006 5500N M7208 System A7V880 Prestige Camera DVP-706 WFF0411K ZIT64X GV-HIA3 Server 12 USB SV4012H EWS 1230 PKG-1000P SGH-T469 Keyboard QC5045 EL-475netwv 2233BW 400MX-2 Zanussi F902 AX4bpro533 Rdxv49dtkf2 TAM-838 Nuvis 300 K7VT4A AX3smax KDC-4021 All-IN-ONE Silverado 2003 Classic SRV-960 NAD 713 Creature II Professional MS-2083AL Batteries PB50 KE-42TS2E Marshall MB60 CE107BAF-S SL-PH2 L 26 SDR-S15 TX-25X1 CE117A-S X1000 NAS-SC55PKE 29PT8306 12 500N QD GTP-400 Neonumeric NM5 Spirit Cyrus CD8X Intuos 3 5xi Review Harmony 555

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101