Professional use disc (Air Line cabin service)
Region codes of the DVD VIDEO discs that can be played with this player
This player can play back a DVD VIDEO disc which carries the corresponding code to the region code of the player shown in the table above, a marking containing the region code of the player or the "ALL" marking shown below. Even when a DVD VIDEO disc does not carry any indication of the region code, it may sometimes unable to be played on this player due to certain restrictions.
Restrictions due to difference between discs
Some DVD and VCD discs can be played only in certain playback modes according to the intentions of the software producers. As this player plays discs according to their intentions, some functions may not work as intended by you. Please be sure to read the instructions provided with each disc. When an inhibition icon is displayed on the TV screen connected to the player, it indicates that the disc being played is under the restriction as described above.

Inhibition icon

Video formats
TV formats of major countries
TV Format NTSC PAL Major Countries & Areas
Japan, Taiwan, Korea, USA, Canada, Mexico, Philippines, Chile, etc. China, U.K., Germany, Australia, New Zealand, Kuwait, Singapore, etc.
The TV picture display and disc signal systems can be divided roughly into two TV formats (NTSC and PAL). They are variable depending on countries and areas.
This unit has a function for changing the video format according to the TV type. Please confirm the type of your TV.
Checking the Video Format
Check the video format of the TV to be used When the video formats are different :
Try playing the disc. If the video formats of the disc and TV do not match, the played video may be black and white or become as shown below.
To select TV Type (For Europe and Australia)
1 Remove the disc from the unit, then close the tray.
2 Press and hold the PAUSE key on the front panel for more than 5 seconds to be able to select a TV type (PAL, NTSC or AUTO).
Top and bottom edges are not displayed.
Top and bottom areas are dark.

Picture turbulence due to sync unmatching.

Important items

Maintenance
Maintenance of the unit In regard to contact cleaner
When the front panel or case becomes dirty, wipe with a soft, Do not use contact cleaners because it could cause a malfunction. dry cloth. Do not use thinner, benzine, alcohol, etc. for these Be specially careful not to use contact cleaners containing oil, for agents may cause discoloration. they may deform the plastic component.

Reference

Disc handling precautions

Handling

Hold the disc so that you do not touch the playing surface. Label side Playing side Sticker Do not attach paper or tape to either the playing side or the label side of the disc.
Never play a cracked or warped disc
During playback, the disc rotates at high speed in the player. Therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent. Please do not use discs which are not round because they may cause malfunction.

Disc accessories

The disc accessories (stabilizer, protection sheet, protection ring, etc.) which are marketed for improving the sound quality or protecting discs as well as the disc cleaner should not be used with this system because they may cause malfunction.

Sticky paste

Cleaning
If there are fingerprint marks or foreign matter found on the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner.

Storage

When a disc is not to be played for a long period of time, remove it from the player and store it in its case.
Note related to transportation and movement
Before transporting or moving this unit, carry out the following operations. 1. Set the POWER ON/OFF switch to the ON without loading a disc. 2. Wait a few seconds and verify that the display shown appears. "NO DISC" 3. Set the POWER ON/OFF switch to OFF.

Caution on condensation

Controls and indicators

PROGRAM indicator
Indicates current surround mode Indicates current audio stream
RDS indicator RT indicator PTY indicator Repeat mode indicator ANGLE indicator SVCD indicator
TUNED indicator STEREO indicator MUTE indicator SLEEP indicator

Play / pause indicator

Output channel Indicates
Chapter number or track number indicator Title number indicator DVD: DVD video indicator CD: Audio CD indicator MP3: MP3 indicator VCD: Video CD indicator
Character information displey section

Display

For U.S.A. and Canada

For other countries

1 STANDBY indicator 2 POWER on/off (ON/STANDBY) key (For U.S.A. AND Canada) % 2 ON/STANDBY key (For other countries) % 3 Remote sensor $ 4 Disc tray
5 OPEN/CLOSE (0) key 6 SKIP (4, ) / TUNING keys STOP (7) /MEMORY key 8 PAUSE (8) / ST/MONO key 9 PLAY (3) / [INPUT SELECTOR] key 0 VOLUME CONTROL knob ! PHONES jack

Standby mode

While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the condition, the system can be turned ON by the remote control unit.
Operation of remote control unit
The keys on the remote control unit with the same names as on the main unit have the same function as the keys on the main unit.
1 POWER key 2 INPUT SELECTOR keys CD/DVD key TUNER/BAND key VIDEO 1/2 key 3 Numeric keys 4 AUDIO key LISTEN MODE key 5 SET UP key % 6 Cursor Up (5), Down (), Left (2) and Right (3) keys % ENTER key % 7 MENU key 8 SLOW ( , ) keys 9 PRESET keys 0 4, (Skip) keys ! 7 (stop) key 8 (pause) key @ P.MODE key CLEAR key # MARKER key (MARKER)-SEARCH key $ RDS key (for Europe only) PTY key (for Europe only) PTY SEARCH key (for Europe only) % OPEN/CLOSE (0) key 0 ^ SLEEP key w & SUB TITLE key ) key RETURN ( * ON SCREEN key ( TOP MENU key ) VOLUME Up (5), Down () keys 3 (play) key MUTE key REPEAT key (REPEAT) A-B key ANGLE key ZOOM key DIMMER key w

& * (

! 0 @ # $
Model : RC-R0311E (for Europe) RC-R0311 (for other countries) Infrared ray system

Loading batteries

1 Remove the cover. 2 Insert batteries. 3 Close the cover.
Insert two R03 (AAA-size) batteries following the polarity indications.

Operation

Insert the power plug into a power outlet, press the POWER (ON/STANDBY) key of the main unit or POWER key on the remote control to on, then press the desired remote control key.
When pressing more than one remote control keys successively, press the keys securely by leaving an interval of 1 second or more between pressing of keys. Remote sensor
Operating range (approx.)
1. The provided batteries are intended for use in operation checking, and their service life may be short. 2. When the remote controllable distance becomes short, replace both of the batteries with new ones. 3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.

Set Up functions

Preparation for Set Up
1 Set the POWER key (ON/ STANDBY key ) to power on.
2 Set Video Format according to the connected TV type. (To select TV Type 7) (For Europe and Australia) MAIN UNIT
If the video formats of the disc and TV do not match, press and hold PAUSE key on the front panel for more than 5 seconds to be able to select a TV type (PAL, NTSC or AUTO). (No disc inserted)

Set up menu

Initial Settings
By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 16 to 18.
To display and exit the Menu:
Press SETUP key to display the menu. A second press of SETUP key will take you back to initial screen.

General Operation

1 Press SETUP key. The Setup menu appears.
Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan Original English French German Spanish Italian Chinese Polish Hungarian 5.1 Speaker Setup Others Other

To go to the next level:

Press the Cursor right ( 3 ) key on the remote.
To go back to the previous level:
Press the Cursor left ( 2 ) key on the remote.
2 Use the Cursor up/down (5/) keys on the remote to select the desired option, then press the Cursor right (3) key to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s).
3 Use the Cursor up/down (5/) keys on the remote to select the second desired option, then press the Cursor right (3) key to move to the third level.
4 Use the Cursor up/down (5/) keys on the remote to select the desired setting, then press ENTER key to confirm your selection. Some items require additional steps.
5 Press SETUP key, RETURN key or PLAY key to exit the Setup menu.

*5476/15-19/EN

Language
Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan 5.1 Speaker Setup Others Original English French German Spanish Italian Chinese Polish Hungarian Other

LOCK (Parental Control)

Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan Unlock 5.1 Speaker Setup Others Change
Disc Audio/ Disc Subtitle/ Disc Menu
Select the language you prefer for the audio Track (Disc Audio), Subtitles, and the Disc Menu Original: Refers to the original language in which the disc was recorded. Other: To select another language, press numeric keys then ENTER key to enter the corresponding digit number according to the language code list (() in the reference chapter. If You enter the wrong Language code, press CLEAR key.
Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan 5.1 Speaker Setup Others

English Spanish French

Rating
Some movies contain scenes that may not be suitable for children to view. Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative. The parental control feature allows you to block access to scenes below the rating you input, thereby preventing your children from being able to view material you believe is unsuitable. 1 Select "Rating" on the setup menu then press the Cursor right (3 ) key. 2 When you have not entered a password; Enter a 4-digit password using the numeric keys to create a personal 4-digit security password. then press ENTER key. Enter the 4-digit password again and press ENTER key to verify. When you have already registered a password; Enter a 4-digit password using the numeric keys to confirm the personal 4-digit security password, then press ENTER key. If you make a mistake before pressing ENTER key, press CLEAR key and enter 4-digit security password again. 3 Select a rating from 1 to 8 using the Cursor up/ down (5/) keys. Rating 1-8: Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. Unlock If you select unlock, parental control is not active and the disc plays in full.

Menu Language

Select a language for the Setup menu. This is the menu you see when you press SETUP key.

TV Aspect

Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan 5.1 Speaker Setup Others 4:3 Letterbox 4:3 Panscan 16:9 Wide
4:3 Letterbox: Select when a standard 4:3 TV is connected. Displays a wide picture with bands on the upper and lower portions of the screen. 4:3 Panscan: Select when a standard 4:3 TV is connected. Automatically displays the wide Picture on the entire screen and cuts off the portions that do not fit. 16:9 Wide : Select when a 16:9 wide TV is connected.

Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. 1 Press 7 (stop) key to stop any disc that is playing. 2 Press 7 (stop) key again for more than 5 seconds. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor.

Others

The DRC, Vocal and PBC settings can be changed. Press the Cursor up/down (5/) keys to select the desired item and press ENTER key. The setting of the selected item is changed between On and Off.
Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan DRC Vocal PBC Off On On
Set to on only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc mix into normal stereo sound.
Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played the same way as Audio CDs.

5.1 Speaker Setup Others

Dynamic Range Control (DRC)
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect. This function operates only at the time of playback of DVDs recorded with Dolby Digital.
Hierarchical structure of VCD menus (P.B.C. function)
When an item is selected on the menu screen during playback of a P.B.C.-compatible VCD, another menu with more details items may be displayed. When a number of menus are connected in multiple layers in this way, it is said that the menus have a hierarchical structure. In this structure, the desired scene can be reached by repeating item selections on the menu screens. Example for a hierarchical structure

First level (menu)

Second level (submenu)

Third level (scenes)

Advancing When an item is selected on the menu screen with the ENTER (Select) key or the numeric keys, advance is made to the next lower menu level. When the advance destination is the "scene" to be played, the contents will be played. When several menus (scenes) can be selected in each level, screen switching is possible with the keys (NEXT) and 4 (PREV.).

SA SN SG SK SI ZA KR ES LK SE CH TW TH TR UG UA US UY UZ VN ZW

Setting up LISTEN mode

What are LISTEN modes?
You can experience true home-theater sound with your new system. This system incorporates several listen modes to let you enjoy surround sound with a wide variety of program sources. Each produces multiple channels of surround-sound, but each does it differently.
Dolby Digital: Dolby Digital uses an encode/decode process based on its theatrical digital surround sound technology. The five main channels are full-frequency and independent, so sound can completely envelop you or soar anywhere in the room, just like at the movies. Compared with Dolby Pro Logic, Dolby Digital has more clarity, greater surround envelopment, and more realistic sound movement between channels.
Dolby Pro Logic/Dolby Pro Logic II: Dolby Pro Logic reproduces a surround sound like in a movie theater from Dolby Surroundencoded program source (videotape or LaserDisc software carrying the Dolby Surround logo), and features excellent sound movement on the front and a surrounding atmosphere of movie theaters. Meanwhile, Dolby Pro Logic II decodes a signal encoded in 2 channels into 5-channel signals composed of the left/right front signals, center signal and surround left/right signals. Dolby Pro Logic II is an advanced version of the decoding technology used with Dolby Pro Logic. It inputs 2-channel signals from a Dolby Surround-encoded source and reproduces 5-channel signals in which the surround channel is divided into independent channels for the left and right. Dolby Pro Logic II has the MOVIE mode and MUSIC mode. MOVIE mode: The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete 5.1-channel sound. MUSIC mode: The Music mode is for use with any stereo music recordings. MATRIX mode: The Matrix mode is the same as the Music mode except that the directional enhancement logic is turned off. It may be used to enhance mono signals by making them seem larger. The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate cure for poor FM stereo reception may be simply to force the audio to mono. DTS : DTS has five full-frequency channels that create effects nearly identical to those in a theater. Sounds seem to zoom from one place to another or entirely surround you. Like Dolby Digital, DTS has much-improved clarity, surround and sound movement capability compared with Dolby Pro Logic. This listen mode is available on CD, LD, and DVD media. DTS is a strictly digital format that can be supplied only by a CD, LD, or DVD player that supports DTS sound. Stereo: Stereo listen mode provides standard stereo sound to the front left and right speakers. 3D Surround: To produce a 3D surround effect that simulates multi-channel audio from two stereo speakers. BYPASS : Software with multichannel surround audio signals is played according to the way it was recorded.

POWER INPUT SELECTOR VOLUME MUTE VOLUME CONTROL

POWER/ON STANDBY

PHONES 3/[INPUT SELECTOR]

Basic use method

1Selecting the desired input

MAIN UNIT REMOTE

The power will be switched on and the respective operation will be performed also when the 0 key on the main unit is pressed during STANDBY mode. When a disc is set in the disc tray and the CD/DVD key is pressed, disc playback will start automatically.
1 Press /[INPUT SELECTOR] key for more than 3 seconds. 2 Press /[INPUT SELECTOR] key repeatedly. each press switches the mode.
When press VIDEO 1/2 key on the remote, switches input modes as shown below.
After press /[INPUT SELECTOR] key for more than 3 seconds, each press /[INPUT SELECTOR] key switches input modes as shown below.

2Volume adjustment

MAIN UNIT
1 VIDEO 1 (audio, video) 2 VIDEO 1 (video) + OPT (digital audio input) 3 VIDEO 2 (audio, video) 4 VIDEO 2 (video) + OPT (digital audio input) 5 TV-AUDIO (for Europe, input from SCART cable)
1 CD/DVD 2 VIDEO 1 (audio, video) 3 VIDEO 1 (video) + OPT (digital audio input) 4 VIDEO 2 (audio, video) 5 VIDEO 2 (video) + OPT (digital audio input) 6 TV-AUDIO (for Europe, input from SCART cable) 7 FM (frequency display) 8 AM (frequency display)
Normally "VOL MAX" is displayed when the volume settings set to the maximum value.

To increase

To decrease To decrease To increase
Muting the sound temporarily
Press MUTE key. Press again to resume the original volume. The sound muting is also cancelled when the volume is controlled.
Listening through headphone
Insert the headphone plug into the PHONES jack.
This unit offers various surround modes, but it switches automatically to stereo mode when headphones are connected.
The sounds from all speakers are cut off.
Receiving broadcast station
It is also possible to receive them by one-touch operations by storing up to 30 stations in the preset memory. ( )

TUNER/BAND

Numeric keys
PRESET 8 / ST/MONO 4 TUNING

1Select the TUNER input

When the key is pressed, this unit will be switched on automatically.
Stereo tuning indication Tuning indication
Press the TUNER/BAND key on the remote.
2Select the broadcast band
Preset number Band display

Frequency display

Each press changes the band. 1 FM 2 AM

3Select a tuning mode /

Press the 8
ST./MONO key on the remote.
Each press switches the mode
1 STEREO : stereo mode 2 MONO : monaural mode

4Select a station

P.CALL (preset call)

Auto tuning

Manual tuning
Press the PRESET (5/) keys on the remote control to select a preset station. In case of input with the numeric keys. (Example) To select preset No.3 : 3 To select preset No.14 : 14 (within 3 seconds) Press the TUNING (4/) keys on the main unit for more than 2 seconds to receive the next tuned station automatically Each time a key is pressed, the frequency is changed by one step. Use the manual tuning mode when reception is noisy due to weak reception.

Using the PTY search function

PTY SEARCH PTY

1Select the FM band.

2Press the PTY key.

RDS Program types
Program Type Name News Current Affairs Information Sport Education Drama Culture Science Varied Pop Music Rock Music Receiver Display NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M EASY M LIGHT M CLASSICS OTHER M WEATHER FINANCE CHILDREN SOCIAL RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT TEST ALARM 1
The PTY MODE (POP M, ROCK M etc.) appears on the display.
Press the PTY key to select the desired program type.
When the program type is selected, press the PTY SEARCH key.
Easy Listening Music Light Classical Music Serious Classical Music Other Music Weather Finance
Auto-search the station sequentially Press again during search to cancel.
Childrens programs Social affairs Religion Phone in Travel Leisure Jazz Music Country Music

PTY found

PS display

PTY not found

After display of NO PTY, return is made to the normal display.
National Music Oldies Music Folk Music Documentary Station Alarm Test Message Emergency Broadcast Information

Playback of disc

Basic play
TOP MENU MENU 7 (STOP) 8 (PAUSE) 3 (PLAY) POWER OPEN/CLOSE
Various playback functions

8 / ST./MONO 7 / MEMORY

POWER/ON/STANDBY
0 (OPEN/CLOSE) 3/[INPUT SELECTOR]

1 Load a disc.

Label side

1 Open the tray.

2 Place a disc.

2 Start playback.

READING appears on the TV screen.
CHAPTER No. (DVD) Time display TITLE No. (DVD)

TRACK No. (CD/VCD)

When the 3 key is pressed while a tray is open, the tray closes automatically, and then playback begins.
When a Disc Menu appears on the screen
In case of interactive DVDs, a Disc Menu appears on the screen. Then press ENTER to select specific menu you want to play by using Cursor keys.

To stop playback

To pause playback
During DVD playback, step operation is performed each time this key is pressed. ()

Select Subtitle Language

You can change the Subtitle language while youre watching a disc (but only if the disc was created with subtitles). During playback, press the SUBTITLE key on the remote.

Subtitle language icon

If all 9 marker points are in use, you can still mark new scenes, but the previous marker points will be erased. Depending on the disc, the marker function may not work.
The language is switched each time the SUBTITLE key is pressed.
The display is switched off when no operation is performed for about 5 seconds. 1. The subtitle feature only works if the disc was created with multiple subtitle tracks. 2. The subtitle menu of the disc appears in some discs.
Clearing all marker points
The marker points are cleared each time a disc is removed from the player or when the power is turned off.

Select Camera angle

Some disc contains multiple angles particular scene or sequence. If the disc only has one angle, this feature wont work.

Title Menu / Disc Menu

DVDs may offer menus that allow you to access special features.

To use the Title Menu

1 Press the TOP MENU key on the remote.
1 During playback, press the ANGLE key on the

Angle icon

If the current title has a menu, the menu will appear on the screen. Otherwise, the disc menu may appear. The menu can list camera angles, audio language and subtitle options, and chapters for the title.
2 Press the numeric keys or the Cursor keys (5/
/2/3) on the remote to select an option, then press ENTER key.
2 Select the Camera angle with press the ANGLE
To remove the title menu, press TOP MENU key again.

To use the Disc Menu

1 Press the MENU key on the remote.
The display is switched off when no operation is performed for about 5 seconds. The disc menu is displayed.
To remove the title menu, press MENU key again.

Repeat play

Desired title, chapter, track or disc can be played back repeatedly. At the time of DVD playback.
"CHAPTER " : Repeat the chapter that is playing. "TITLE " : Repeat the title that is playing.

Zoom function

Use zoom to enlarge the video image.
1 During playback, press the ZOOM key on the
At the time of CD/VCD playback.
"TRACK" : Repeat the track that is playing. "ALL" : Repeat the disc that is playing.
During playback, press the REPEAT key on the remote.

Repeat icon (TITLE)

2 Press the Cursor (2/3/5/) keys on the
remote to move through the zoomed picture.
Each press the key switches the REPEAT mode At the time of DVD playback.
1 "CHAPTER" 2 "TITLE" 3 "OFF" (Repeat off)
1 "TRACK" 2 "ALL" 3 "OFF" (Repeat off) To resume normal playback, press ZOOM key repeatedly or press CLEAR key.
To cancel repeat playback, press the REPEAT key and select "OFF".
If you press SKIP () once during Repeat Track playback, the repeat playback cancels.
Zoom may not work on some DVDs.
"MP3/WMA Repeat play"
P.B.C. on mode of VCD, the Repeat play function does not work. *

A-B Repeat play

The A-B repeat function lets you mark a segment to repeat between the beginning "A" and the end "B" of the segment you want to replay.
1 Press the A-B key on the remote when you want
to choose a scene (sound) as the beginning point.

Repeat A icon

"A *" display appears.
2 Press the A-B key again to choose a scene
(sound) as the end point.

Repeat A-B icon

"A - B" display appears and the repeat sequence begins. To cancel A-B Repeat playback, press the A-B key.

Time Search

To start playing at any chosen time on the disc.
Using the TV screen to start CD playback
Once you insert an audio CD a menu appears on the TV screen.
TRACK01 TRACK02 TRACK03 TRACK04 TRACK05 TRACK06 TRACK07 TRACK08 0: 56: 18 STER. Clear All BYPASS
1 During playback, press the ON SCREEN key on

the remote.

Program
The time search box shows the elapsed playing time.
2 Press Cursor up/down (5/) keys on the remote
to select the time clock icon.

Time clock icon

0:20:09
1 Press the Cursor up/down (5/) keys on the remote to select a track then press PLAY (3) or ENTER and playback starts.
"-:--:--" appears. The display is switched off when no operation is performed for about 10 seconds.

Example for a hierarchical structure
Folder names and file names are displayed up to 8 characters. When folder names and file names are recorded with more than 8 characters, the names will be displayed in abbreviated form.

*5476/38-42/EN

Playing back MP3/WMA/JPEG files
It is not possible to play back folders and files that exceed the maximum limitations of the media. A certain amount of time is required for the player to confirm the media on which MP3/WMA/JPEG files have been recorded before playback will commence.

Playback

1 Insert a disc and close the tray.
The MP3/WMA-JPEG choice menu appears on the TV screen. 2 Press Cursor up/down (5/) keys on the remote to select MP3/WMA or JPEG, then press the ENTER.

MP3 WMA JPEG

MP3 WMA
Folder1 Folder2 Folder3 Folder4 Folder5 Folder6 Folder7 Folder8

Clear All

3 Press Cursor up/down (5/) keys on the remote to select desired folder, then press the ENTER key
A list of files in the folder appears.
TRACK TRACK TRACK TRACK TRACK TRACK TRACK TRACK 1.mp3 2.mp3 3.mp3 4.mp3 5.mp3 6.mp3 7.mp3 8.mp3
Press RETURN key to move to the MP3/WMA-JPEG choice menu.
If you are in a file list and want to return to the Folder list, use the icon Cursor up/down (5/) keys on the remote to highlight and press ENTER to return to the previous menu screen.
4 Press Cursor up/down (5/) keys on the remote to select desired file, then press the PLAY key or the ENTER key to start playback.
Playback start. (MP3/WMA files) Viewing the file proceeding starts. (JPEG files) During viewing a file, press RETURN key on the remote to move to the previous menu (JPEG menu).

Folder1

Picture1 Picture2 Picture3 Picture4 Picture5 Picture6
Press TOP MENU to move to the next page. Press MENU to move to the previous page. When JPEG files are displayed, the display is switched automatically from one file to the next. (Slide Show) ("Change the Slide speed" )

Menu screen messages are not shown in the desired language. A VCD cannot be played using menus.
Select disc menu language.
Menu playback is available only with VCD discs recorded with P.B.C.
The inhibition icon is displayed and remote control is not possible.
Playback is restricted intentionally by the software producer.
The operation is inhibited. Please try another operation.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE "STANDARD DEFINITION" OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525P DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

Specifications

Main unit

[ Amplifier section ]

Effective output power during STEREO operation 1 kHz, 10 % T.H.D. at 8 .. 55 W + 55 W Effective output power during SURROUND operation Front (1 kHz, 10 % T.H.D. at 8 , one channel driven)... 55 W + 55 W Center (1 kHz, 10 % T.H.D. at 8 , one channel driven). 55 W Surround (1 kHz, 10 % T.H.D. at 8 , one channel driven)... 55 W + 55 W Subwoofer (100 Hz, 10 % T.H.D. at 4 , one channel driven)... 100 W Input sensitivity / impedance VIDEO 1 / VIDEO 2. 650 mV / 47 k Output level / impedance VIDEO 1... 1 V / 100

[ General ]

Power consumption... 70 W Dimensions.. W: 360 mm (14-3/16) H: 74 mm (2-15/16) D: 375 mm (14-13/16) Weight (net).. 4.4 kg (9.7 lb)

Speaker system

[ KSW-6300 ]

(Front/Center)

Enclosure.. Bass-Refrex (Magnetically shielded) Speaker configuration.. 50 mm (2), cone type Impedance... 8 Power Handling Capacity (DVR-6300).. 60 W Dimensions.. W: 80 mm (3-1/8) H: 160 mm (6-5/16) D: 98 mm (3-7/8) Weight (net)... 0.5 kg (1.1 lb)(1 piece)
[ Digital audio section ]
Input level / impedance / wave length Optical (VIDEO1 / VIDEO2).. -21 dBm ~ -15 dBm, 660 nm

[ Tuner section ]

FM tuner section Tuning frequency range.. 87.5 MHz ~ 108 MHz AM Tuner section Tuning frequency range (for Europe and Australia)... 522 kHz ~ 1,611 kHz Tuning frequency range (for U.S.A. and Canada)... 530 kHz ~ 1,720 kHz

(Surround)

Enclosure.. Bass-Refrex Speaker configuration.. 50 mm (2), cone type Impedance... 8 Power Handling Capacity (DVR-6300).. 60 W Dimensions.. W: 80 mm (3-1/8) H: 160 mm (6-5/16) D: 98 mm (3-7/8) Weight (net).. 0.4 kg (0.9 lb) (1 piece)