Reviews & Opinions
Independent and trusted. Read before buy Kenwood KDC-2011S!

Kenwood KDC-2011S

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Kenwood KDC-2011S Car Audio, size: 5.3 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Kenwood KDC-2011SAbout Kenwood KDC-2011S
Here you can find all about Kenwood KDC-2011S like manual and other informations. For example: wiring diagram.

Kenwood KDC-2011S manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Kenwood KDC-2011S please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Kenwood KDC-2011S photo ]

Video review

Kenwood KDC X994

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
JayRitch 1:34am on Thursday, August 12th, 2010 
Unit sounds great. This unit performs far better than one would expect for the price. Nice Features, Easy To Install
unexist 8:42am on Wednesday, May 12th, 2010 
Great Car Audio Ive Owned other Kenwood stereos & this 1 is as good as all the others. Worth the price paid I got this guy for $70.00 and well, it does most of what I want it to do.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Function Control : [FNC] Pressing this button allows you to set various functions using the Control knob. Refer to <Function Control> (page 6). Category Function of setup item MENU Allows you to set up the environment. SETUP Allows you to set up the display and color. SOUND Allows you to set up the sound environment. BT Allows you to set up the Bluetooth function. Allows you to set up the each source function.
Favorite Control : Control knob You can recall the various registered functions by turning the Control knob. For example, you can recall and playback the playlist in iPod while listening to Tuner. Refer to <Favorite Control> (page 34).

Disc ejection: [0]

You can eject the disc for 10 minutes after switching off the engine.
USB device/iPod play: USB Terminal Connecting a USB device starts playback.

Tuner functions

FM band: Control knob Switches between FM1, FM2, and FM3 each time pushing toward up. AM band: Control knob Switches to AM when pushing toward down. Tuning: Control knob Changes the frequency when pushing toward left or right.
For the playable audio file, media, and devices, refer to <About Audio file> (page 45).
Pause and play: Control knob Switches between pause and play each time this button is pressed. USB device removing: [0] Press this button for 2 seconds or longer to select the remove mode, and the remove the USB device. During the remove mode, USB REMOVE is displayed. Music search: Control knob Changes the music when pushing toward left or right. Fast reverses or forwards the music while keeping pushing toward left or right. (No sound is output while playing audio file.) Folder search: Control knob Changes the folder containing the audio file when pushing toward up or down.
For the operation on iPod, enter <Music Search for iPod> (page 13) is first to enter the search mode.
During reception of stereo stations the ST indicator is ON.
Tuning mode select: [AUTO] For KDC-HD942U/ KDC-X693/ KDC-MP642U: Switches as follows each time this button is pressed. For KDC-X993: Switches as follows each time this button is pressed for at least 1 second. Tuning mode Display Operation Auto seek Seek Mode : Auto1 Automatic search for a station. Preset station Seek Mode : Auto2 Search in order of the stations in seek the Preset memory. Manual Seek Mode : Manual Normal manual tuning control.
Search mode: [ ] After pressing [ ] button, you can quickly search songs with the Control knob. See <Music Search> (page 13) for details.
Disc & Audio file play functions
Drop open the faceplate: Release
Microphone: (Accessory of KDC-X993) The microphone for the hands free phone is supplied. When your voice cannot be recognized due to the low microphone volume or noises in the vehicle, adjust the microphone settings by selecting MENU >Mic Gain of <Function Control> and MENU >NR Level of <Function Control> (page 6).

The Control knob is used for entry, but how to use the knob varies depending on the setting items.
: Press the Control knob to switch the settings. : Push the Control knob towards left or right to switch the settings. : Turn the Control knob to switch the settings. 1 sec. : Press the Control knob for 1 second to enter into the setting mode. 2 sec. : Press the Control knob for 2 seconds to enter into the setting mode.
In this manual, the above selection is indicated as Select MENU > DEMO Mode. Each items & will be when the source function is set to ON.

4 Make a setting

Push the Control knob towards up or down. Press the Control knob to set the source function item ON/OFF. Some items require you to keep pressing the Control knob for 1 or 2 seconds so that you can make a setting. For these items, the time during which you need to keep pressing the Control knob is displayed in the Entry column in seconds. For the functions accompanied by the description of the setting procedure and so forth, the reference page numbers are displayed.
Refer to the respective page for information on how to set the items with reference page number. Only the items available to the current source are displayed. The SOUND setting cannot be performed while the Dual Zone function is used.
5 Exit Function Control mode
Press the [FNC] button for at least 1 second.
*Factory setting * Function of KDC-X993. * Function of KDC-X693. * Function of KDC-X693 with KCA-BT200. * Function of KDC-MP642U. * Refer to <Menu Glossary> (page 48).

Source function item

Function iPod BY HAND FILE SCAN FOLDER RDM ALL RANDOM FILE REPEAT FOLDER REP TRACK SCAN DISC RANDOM MAGAZINE RDM TRACK REPEAT DISC REPEAT PTY SEARCH AUTO MEMORY Channel Scan Setting ON/ OFF* ON/ OFF* ON/ OFF* ON/ OFF* ON/ OFF* ON/ OFF* ON/ OFF* ON/ OFF* ON/ OFF* ON/ OFF* ON/ OFF* Entry Setting overview When set to ON, allows you to operate iPod with the control on the iPod. When set to ON, plays the intro of the music in the folder successively. When set to ON, plays the music in the folder randomly. When set to ON, all songs in iPod are played at random. When set to ON, plays the music repeatedly. When set to ON, plays the music in the folder repeatedly. When set to ON, plays the intro of the music on the disc successively. When set to ON, plays the music on the disc randomly. When set to ON, plays the music in the disc changer randomly. When set to ON, plays the music repeatedly. When set to ON, plays the music on the disc repeatedly. Select the Program Type and search for a station. Memorizes 6 stations with good reception automatically. Every receivable Channel is checked for 10 seconds. Condition Page 14 14 42

Preference item

Category MENU Item Security Set/ Security Clear SRC Select Skip Search Setting 1*/ 2 0.5%*/ 1%/ 5%/ 10% OFF/ 0S 8S* 99S 2 0* +0* +2 Entry 1 sec. Setting overview Sets/Resets security code. Sets the source selection method. Sets the ratio of skip performed with <Music Search for iPod>. 1 sec. 1 sec. 1 sec. 1 sec. 1 sec. 1 sec. 1 sec. Register a Bluetooth device (pairing). Allow registration of a special device that cannot be registered normally. Select a cell-phone subject to hands-free connection. Select the Bluetooth audio player to be connected. Cancel registration of the Bluetooth device. Display the status of the Bluetooth device. Specify the PIN code required when registering this unit using the Bluetooth device. Answer a call automatically after lapse of the preset time interval for automatic answer. Adjusts the sensitivity of the built-in microphone for a telephone call. Reduces the noises generated by the surrounding environment without changing the microphone volume. Condition Page 13
Device Regist* SPCL DVC Select* Phone Selection* Audio Selection* Device Delete* BT DVC Status* PIN Code Edit* Auto Answer* Mic Gain* NR Level*

38 * 36 * * *

Next page 3
Category Item SP Select* Call Beep* BT F/W Update* Beep Clock Adjust Date Adjust Date Mode SYNC DSI Illumi DIM Setting Front*/ F-R/ F-L ON*/ OFF OFF/ ON* 7 types OFF*/ ON OFF/ ON* OFF/ AUTO* / MNAL1 / MNAL2 OFF/ ON* 1 sec. 1 sec. 1 sec. Entry Setting overview Specify the voice output speaker. Output a beep from the speaker when a call comes in. 1 sec. Display the firmware version and update the firmware. Setting the operation check sound (beep sound) ON/ OFF. Sets the clock. Sets the date. Sets the date display mode. Synchronizing the RDS station time data and this units clock. DSI (Disabled System Indicator) of the unit blinks when the faceplate is removed. Sets whether the illumination is dimmed in conjunction with the light switch of the vehicle or it is dimmed constantly. Sets whether the key illumination color (KDC-X993/ KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U) is changed in conjunction with the key operation. Sets whether the key illumination color (KDC-X993/ KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U) is changed in conjunction with the sound volume. Turns off the display when no operation is performed. Dims the display part in conjunction with the light switch of the vehicle. Adjusting the display contrast. Switches the panel display between positive or negative. Turns on/off the built-in amplifier. Specifies the destination of AUX input sound when the Dual Zone function is turned on. Controls the connected LX amplifier. Switches to the traffic information automatically when the traffic bulletin starts. Switches to Monaural to decrease noise when reception is poor. Sets the receive mode of HD Radio. 1 sec. Displays the tag memory usage of HD Radio. Up to 50 tags can be registered to this unit. Turns ON / OFF the tag memory function of HD Radio. Displays the Electronic Serial Number of satellite radio. 1 sec. Sets the display when switched to AUX source. Specifies whether the text is scrolled automatically. Deletes Favorite Preset Memory. Sets whether to display AUX during source selection. Sets the CD read mode. 2 sec. Specifies whether to enable demonstration. * 27 Condition Page * * 38 26 *

4 Exit Illumination color selection mode
Function of Audio file/ Internal CD source Function of iPod

Music Search

Selecting the music you want to listen to from the device or media being played now.

Music Search for iPod

Search for the song (in iPod) you want to play.
1 Enter Music Search mode

Press the [ ] button.

Press the [ ] button. SEARCH is displayed. Displays the current Audio file name.

2 Search for music

Operation type Movement between items Skip Search *1 Selection of item Return to previous item Return to Top menu Search by initial Operation Turn the Control knob. Push the Control knob towards right or left. Press the Control knob. Push the Control knob towards up. Push the Control knob towards up for at least 1 second. Push the Control knob towards down. Refer to the next section <Searching for Music by Initial>.

Audio file

Operation type Movement between folders/files Selection of folder/file Return to previous folder Return to root folder Operation Turn the Control knob or push it towards up or down. Press the Control knob or push it towards right. Push the Control knob towards left. Push the Control knob towards left for at least 1 second.
Scroll bar is displayed on the right side of the screen.
8 or 7 beside the displayed folder name indicates that this folder is preceded or followed by another folder. File name is displayed with indicator.
Cancelling the Music Search mode Press the [ ] button.
*1 Skip Search: The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected now. Set the ratio with Skip Search in <Function Control> (page 6). Keep pushing Control knob for 3 seconds or longer skips songs at 10% irrespective of the setting. Characters that are included in a song name but cannot be displayed are left blank. If no character included in a song name cannot be displayed, the browse item name and digits are displayed.

Internal CD source

Operation type Operation Movement between track Turn the Control knob or push it towards up or down. Selection of track Press the Control knob. Return to first track Push the Control knob towards left for at least 1 second.
Music Search cannot be performed during Random play.
Items Playlists Artists Albums Songs
Display PLIST*** ART*** ALB*** PRGM***
Items Podcasts Genres Composers
Display PDCT*** GEN*** COM***
Function of iPod Function of iPod
Searching for Music by Initial
You can select an alphabetic character from the list in the browse item (artist, album, etc.) selected now.

All Random

All songs in iPod are played at random. Enter All random mode Select ALL RANDOM. For how to select Function Control items, refer to <Function Control> (page 6).

Program Type Preset

Putting the Program Type in the Preset button memory and quick recall.
Presetting the Program Type
1 Select the Program Type to preset
Refer to <PTY (Program Type)> (page 17).
2 Enter Program Type Preset mode
Press the Control knob for at least 1 second.
Recalling the preset Program Type

1 Enter PTY mode

Speech and Music include the Program type shown below. Music: Black character item. Speech: White character item.
3 Select a desired Program Type in the memory

1 Select PTY mode

Select PTY SEARCH. For how to select Function Control items, refer to <Function Control> (page 6).
4 Recall the Program Type
2 Select the Program Type
Registration of a Station as a PTY
Registering a Program Type for stations with no PTY data.
3 Search for the selected Program Type station

4 Exit PTY mode

This function cannot be used during a traffic bulletin or AM reception. When the selected Program Type is not found, No PTY is displayed. Select another Program Type.
1 Receive the station you want to register 2 Select the Program Type to register
3 Register the Program Type
Press the [FNC] button for at least 2 seconds.
Confirming the Program Type Press the [FNC] button. The Program Type is displayed for 3 seconds.
Function of KDC-HD942U KDC-X993/ KDC-X693/ KDC-MP642U with KTC-HR300 (Optional Accessory)
HD Radio Tagging (iTunes Tagging)
Using an iTunes Tagging enabled HD Radio you can tag your music. When you hear a song you enjoy on your local HD Radio station, you only have to press the Control knob. The songs information will then be saved on this unit. The saved songs will then show up in a playlist called Tagged in iTunes the very next time you sync your iPod to your computer. So then you just need to click and then easily buy and download the song you were tagging directly from the Apple iTunes Music Store.

2 Select Tuning item

Press the [DIRECT] button on the remote control. Pressing the [DIRECT] button each time switches the following tuning items as follows. Tuning item Frequency Channel Cancelling Direct Access Tuning Display CH
1 Enter HD Radio tagging mode
Press the Control knob. TAG will be indicated on the display when song information can be registered.
Turn ON the MENU > Tagging of <Function Control> (page 6) when using this function. Up to 50 TAGs (songs information) can be registered to this unit. When iPod is connected, the TAG information registered to this unit is transferred to the connected iPod. The memory usage can be checked by selecting MENU > Tag Memory of <Function Control> (page 6).

3 Enter the frequency or Channel
Press the number buttons on the remote control. Example of frequency input: Desired frequency 92.1 MHz (FM) 810 kHz (AM) Press button [9], [2], [1] [8], [1], [0]
4 Do Direct Access Tuning
Function of KDC-X993 KDC-HD942U/ KDC-X693/ KDC-MP642U with KCA-BT200 (Optional Accessory)

Before Use

For details on the Bluetooth cell-phone with the hands-free function, see <About the Cell-Phone> (page 46). You need to register your cell-phone before using it with this unit. For more details, see <Registering Bluetooth device> (page 36). If you have registered two or more cell-phones, you need to select one of them. For more details, see <Selecting the Bluetooth device You Wish to Connect> (page 37). To use the Phone Book, it must be downloaded to this unit in advance. For details, see <Downloading the Phone Book> (page 37). BT indicator is lit when a cell-phone is connected to this unit.
your cell-phone to return to the hands-free talk mode.
Adjusting the Voice Volume during a Call Turn the [AUD] knob.

Call waiting

Answering Another Incoming Call with the Current Call Suspended
1 Press the [AUD] button. 2 Turn the Control knob or push it towards up
or down. Select the ANSWER display.
3 Press the [AUD] button.
Answering another Incoming Call after Terminating the Current Call Press the [SRC] button or press the [ ] button for at least 1 second. Continuing the Current Call

Receiving a call

Answering a Phone Call Press the [AUD] button.
The following operations disconnect the line: - Insert a CD. - Connect a USB device. The name of the calling party is displayed if it has already been registered in the Phone Book.
or down. Select the REJECT display.
Answering the Waiting Call after Terminating the Current Call Press the [SRC] button or press the [ ] button for at least 1 second. Switching between the Current Call and Waiting Call Press the [AUD] button. Each pressing of this knob switches the calling party.

Rejecting an Incoming Call Press the [SRC] button or press the [ for at least 1 second.

] button

During a call
Disconnecting a Call Press the [SRC] button or press the [ for at least 1 second.
Switching to the Private Mode Press the Control knob. Switches between Private talk (PRIVATE) and Hands-free talk each time this button is pressed.

Other functions

Clearing the Disconnection Message KDC-X993: Press the [ ] button. KDC-HD942U/ KDC-X693/ KDC-MP642U: Press the [ ] button for at least 1 second. HF Disconnect disappears.
Depending on the type of your cell-phone, switching to the private talk mode may select the source that was used before commencing the hands-free connection. If this happens, the source cannot be switched back to the hands-free talk mode by operating this unit. Operate
Making a call 1 Enter dialing method mode
KDC-X993: Press the [ ] button. KDC-HD942U/ KDC-X693/ KDC-MP642U: Press the [ ] button for at least 1 second.
Speed dialing (Preset dial) 1 Enter dialing method mode
2 Select a dialing method
Press the Control knob. DIAL INITIAL PHONE BOOK OUT-CALL IN-CALL MISSED CALLS Methods of operations in the above modes are described below.
2 Press the Control knob.
Select the DIAL, PHONE BOOK, OUT-CALL, IN-CALL, or MISSED CALLS display.

3 Enter preset dial mode

3 Exit the dialing method mode
4 Select the number you want to recall from the
memory Turn the Control knob or push it towards up or down.
5 Press the Control knob.
Phone number is displayed.
Dial a number 1 Enter dialing method mode
6 Exit the preset dial mode

7 Make a call

You need to register the preset dial number. (page 23)
2 Select the number dial mode
Press the Control knob. Select the DIAL display.

3 Enter a phone number

Press the number ([1] [0]), #([FM]), *([AM]), or +([]) button on the remote controller.

4 Make a call

Press the [DIRECT] button on the remote controller.
To erase the entered phone number digit by digit: Press the [4] button on the remote controller.
You can input max 32 digits.
Calling a number in the Phone Book 1 Enter dialing method mode
Calling a number in the call log 1 Enter dialing method mode
2 Select the call log mode
Press the Control knob. Select the OUT-CALL (outgoing call), IN-CALL (incoming call), or MISSED CALLS (missed call) display.

For details on the Bluetooth Audio player which can be connected, see <About the Bluetooth Audio player> (page 47). You need to register your Bluetooth Audio player before using it with this unit. For more details, see <Registering Bluetooth device> (page 36). You to select the Bluetooth audio player you wish to connect. Refer to <Selecting the Bluetooth device You Wish to Connect> (page 37).
Selecting Bluetooth Audio source Press the [SRC] button. Select the BT Audio display. For how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page 4). Pause and play Press the Control knob. Music Search Push the Control knob towards right or left.
All or some of the operations above cannot be performed if the Bluetooth audio player is not ready for remote control. Switching between Bluetooth audio sources does not start or stop playback automatically. Perform the operation for starting or stopping playback. Some audio players cannot be controlled remotely or reconnected after Bluetooth disconnection. Operate the main unit of the audio player to connect Bluetooth.
Activating Security Code Deactivating Security Code
To deactivate the Security Code function.
You can set the Security Code with a 4 digit number of your choice. The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up.
1 Select Security code mode
Select MENU > Security Clear For how to select Function Control items, refer to <Function Control> (page 6).
Select MENU > Security Set For how to select Function Control item, refer to <Function Control> (page 6).
2 Enter Security Code mode
Press the Control knob for at least 1 second. When Enter is displayed, [][][][] is also displayed.

3 Enter Security Code

Operation type Select the digits to enter Select the Security Code numbers Operation Push the Control knob towards right or left. Turn the Control knob or push it towards up or down.

KDC-HD942U/ KDC-MP642U Adjustment Item Display Range BAND1 60/ 100/ 160/ 250/ 400 Hz Band 1 BAND2 630/ 1k/ 1.6k/ 2.5k Hz Band 2 BAND3 4k/ 6.3k/ 10k/ 16k Hz Band 3 Q Quality 0.25/ 0.5/ 1.0/ 2.0 Band level GAIN -9 +9 dB
1 Enter Manual Equalizer Control mode
Select SOUND > Control > EQ > Manual Equalizer. For how to select Function Control item, refer to <Function Control> (page 6).
2 Select the band you want to set
Push the Control knob towards up or down. Move the cursor > to the desired item.
You can select for each source.
5 Repeat steps 2 to 4 to complete the Equalizer
curve. To change the band, move the cursor > to band#.
6 Exit Manual Equalizer Control mode
When iPod is selected in the section <Preset Equalizer curve select> (page 31), Manual Equalizer Control is disabled. You can select for each source.
Preset position selection
According to the listening position, select the position from the following settings so that the normal position of the sound environment can be compensated in accordance with the selected position; Compensation seat Not compensating. Front-Left seat Front-Right seat Front seat Range ALL Front-Left Front-Right Front

Manual position setting

Making fine adjustment of the value specified at Preset position selection per speaker.
1 Enter Manual position setting mode
Select SOUND > Control > Position > Manual Position. For how to select Function Control item, refer to <Function Control> (page 6).
Item FRONT / L FRONT / R REAR / L REAR / R SUBWOOFER / L SUBWOOFER / R INITIAL Setting overview Front Left speaker Front Right speaker Rear Left speaker Rear Right speaker Subwoofer Left Subwoofer Right Initialize the setting values.
1 Enter Preset position setting mode
Select SOUND > Control > Position > Preset Position. For how to select Function Control item, refer to <Function Control> (page 6).
2 Select the seat you want to compensate
3 Exit Preset position setting mode

3 Set the value

Turn the Control knob. Adjust between 0 and 5.58 feet. Press the Control knob for at least 1 second if you want to execute the INITIAL.
4 Exit Manual position setting mode

Audio Preset Memory

Registering the value setup by Sound Control.

Audio Preset Recall

Recalling the sound setup registered by <Audio Preset Memory> (page 33).

1 Setup Sound Control

Refer to the following operations to setup the Sound Control. - Cabin selection (page 29) - Speaker Setting (page 29) - DTA (Digital Time Alignment) setting (page 30) - XOver setting (page 30) - Manual Equalizer Control (page 31) - Preset position selection (page 32) - Manual position setting (page 32)

1 Select the source

2 Enter Audio preset recall mode
Select SOUND > Preset > Recall. For how to select Function Control items, refer to <Function Control> (page 6).
3 Select the number to recall in the memory
Turn the Control knob and push the center when the desired number is displayed.
2 Enter Audio preset memory mode
Select SOUND > Preset > Memory. For how to select Function Control items, refer to <Function Control> (page 6).
4 Turn the Control knob to select YES, and then
press the Control knob. Recall Completed is displayed.
5 Exit Audio preset recall mode
press the Control knob. Memory Completed is displayed.
The User of <Preset Equalizer curve select> (page 31) is changed to the value which was recalled. The Equalizer curve is changed to the value which was recalled by the selected source.
5 Exit Audio preset memory mode
Register 6 pairs of Audio Preset Memory. Number 1: When you press the Reset, all the sources will be the setting value which is registered. Number 1 and 2: The memory cannot be erased by the Reset button. This function cannot be registered when the iPod Equalizer set in <Preset Equalizer curve select> (page 31).

Favorite Control

Favorite Preset Memory
Registering the operation procedure to select your favorite broadcast station or iPod Playlists/ Artists, etc.

Favorite Preset Recall

Retrieving an item registered to Favorite.
1 Enter Favorite Preset Recall mode
1 Display a favorite item
Source TUNER/SIRIUS/XM/HD iPod Hands-free phone Registerable items Preset Memory List selection screen for Playlists/ Artists/ Albums, etc. Telephone number retrieval.
2 Select the number to recall in the Favorite
memory Turn the Control knob.
3 Recall the Favorite Preset
FAV is displayed when the operation procedure can be registered. iPod setting The desired list in the first hierarchy can be registered.

1st hierarchy iPod

PLAYLISTS ARTISTS ALBUMS ALL ARTISTS ARTISTS 1 ARTISTS 2 ARTISTS 3 COMPOSERS AUDIOBOOKS ALL ALBUMS ALBUM 1 ALBUM 2 ALBUM 3
Cancelling the Favorite Preset Recall mode Turn the Control knob to select Return, and then press the Control knob.

2nd hierarchy

3rd hierarchy
When iPod is selected for the source, the list selection screen for Playlists/ Artists/ Albums, etc. is displayed. Songs will not be automatically played.
Favorite Preset Memory Delete
Deleting an item registered to Favorite.
2 Enter Favorite Preset Memory mode
Press the [ ] button for at least 1 second.
1 Enter Favorite Preset Memory Delete mode
Select MENU > Favorite Delete. For how to select Function Control item, refer to <Function Control> (page 6).

2 By operating the cell-phone, send the phone
book data to this unit By operating the cell-phone, download the phone book data to this unit. During downloading: Downloading is displayed. After completion of downloading: Completed is displayed.
5 Exit Bluetooth device selection mode
If a cell-phone is already selected, deselect it, and then select a different one. If you cannot select a device using the audio player, connect the device with the audio player.
Deleting a Registered Bluetooth device
You can delete a registered Bluetooth device.
Adding a voice dialing command
Add a voice tag to the phonebook for voice dialing. You can register up to 35 voice tags.
1 Select Bluetooth device deletion mode
Select MENU > Device Delete. For how to select Function Control item, refer to <Function Control> (page 6).
1 Select Phonebook name edit mode
Select BT > Voice Tag > PB Name Edit. For how to select Function Control item, refer to <Function Control> (page 6).
2 Enter Bluetooth device deletion mode
2 Enter Phonebook name edit mode
3 Search for the name to register
Select the name to register with reference to 4 in <Calling a number in the Phone Book> (page 22). If a voice tag has already been registered for a name, * is displayed before the name.
4 Delete the selected Bluetooth device
5 Turn the Control knob to select YES, and then
press the Control knob. Delete is displayed.

4 Select a mode

Turn the Control knob. Display PB Name Regist PB Name Check* PB Name Delete* Return Operation Register a voice tag. Play a voice tag. Delete a voice tag. Return to step 2.
6 Exit Bluetooth device deletion mode
When a registered cell-phone is deleted, its Phone Book, log, SMS, and voice tag are also deleted.
* Displayed only when a name for which a voice tag has been registered is selected.
Select PB Name Regist (Regist)
Displaying the Firmware Version
Display the version of the firmware of this unit.
5 Register a voice tag (first)
Press the Control knob. Enter Voice 1 is displayed. When a beep is heard, utter a voice tag within 2 seconds.

1 Enter Bluetooth Firmware update mode
Select MENU > BT F/W Update. For how to select Function Control item, refer to <Function Control> (page 6).
6 Confirm the voice tag (second)
Press the Control knob. Enter Voice 2 is displayed. When a beep is heard, utter the same voice tag as that you uttered in step 4 within 2 seconds. Completed is displayed.
2 Enter Bluetooth Firmware update mode
Press the Control knob for at least 1 second. The firmware version appears.
3 Exit Bluetooth Firmware update mode

7 End registration

Press the Control knob. Return to step 2. You can register another voice tag continuously.
For how to update the firmware, access our web site. http://www.kenwood.com/bt/information/
If your voice cannot be recognized, a message is displayed. Pressing the [AUD] knob allows you to retry voice input. (page 54)
Select PB Name Check (Play)
Play the registered voice and return to step 2.
Select PB Name Delete (Delete)

5 Delete a voice tag

Setting a Voice Command for Category
Add a voice tag to the phone number category (type) for voice calling.
6 Turn the Control knob to select YES, and then

press the Control knob.

1 Select Phone Number type edit mode
Select BT > Voice Tag > PN Type Edit. For how to select Function Control item, refer to <Function Control> (page 6).
Exit Phonebook name edit mode Press the [FNC] button.
Audio sound is not output during voice tag registration.
2 Enter Phone Number type edit mode
3 Select the category (type) you wish to set
Turn the Control knob and push the center when the desired category name is displayed. General/ Home/ Office/ Mobile/ Other
Turn the Control knob. Display PN Type Regist PN Type Check* PN Type Delete* Return Operation Register a voice tag. Play a voice tag. Delete a voice tag. Return to step 2.
5 Register the category (type) by performing
steps 5 to 7 in <Adding a voice dialing command> (page 38).
6 Exit Phone Number type edit mode
Set the voice tag for all the 5 categories. If the voice tag is not registered for all the categories, the Phonebook may not be recalled by voice command.
SMS (Short Message Service)
The SMS arrived at the cell-phone is displayed on the receiver. A newly arrived message is displayed.

: Folder Folder : Audio file Audio fi
Update iPod/iPhone software to the latest version. The word iPod appearing in this manual indicates the iPod or the iPhone connected with the iPod connection cable* (optional accessory). * Not supported model KCA-iP500. Refer to the web site for connectable iPod and iPod connection cable. www.kenwood.com/ipod/kca_ip/
If you start playback after connecting the iPod, the music that has been played by the iPod is played first. In this case, RESUMING is displayed without displaying a folder name, etc. Changing the browse item will display a correct title, etc. You cannot operate iPod if KENWOOD or displayed on iPod.
An online manual about audio files is put on the site, www.kenwood.com/audiofile/. On this online manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online manual as well.

About USB device

When the USB device is connected to this unit, it can be charged up provided that this unit is powered. Install the USB device in the place where it will not prevent you from driving your vehicle properly. You cannot connect a USB device via a USB hub and Multi Card Reader. Take backups of the audio files used with this unit. The files can be erased depending on the operating conditions of the USB device. We shall have no compensation for any damage arising out of erasure of the stored data. No USB device comes with this unit. You need to purchase a commercially available USB device. When connecting the USB device, usage of the CA-U1EX (option) is recommended. Normal playback is not guaranteed when a cable other than the USB compatible cable is used. Connecting a cable whose total length is longer than 5 m can result in abnormal playback. English |
In this manual, the word USB device is used for flash memories and digital audio players which have USB terminals.
About Satellite Radio tuner (Optional)
This unit supports Satellite Radio tuners which are released by SIRIUS and XM. Refer to the instruction manual of Satellite radio tuner.
For operating KCA-BT100 (Optional)
The following control methods of the function for this unit may be different from the Instruction manual; therefore, refer to the following supplemental instruction. <Dialing by Using the Quick Dialing Function> 1. Press the Control knob. Select the display other than INITIAL. 2. Press the [ ] button. 3. Select the number to recall by turning the Control knob. 4. Press the Control knob. <Registering to the Preset Dial Number List> 1. Operation is the same. Refer to the instruction manual of KCA-BT100. 2. Press the [ ] button. 3. Select the number to memory by turning the Control knob. 4. Press the Control knob for at least 1 seconds. <Deleting a Registered Cell-Phone> Refer to <Deleting a Registered Bluetooth device> (page 38) in this instruction manual. <Menu System> For how to operate Menu, refer to <Function Control> in this instruction manual. About display Cell-Phone Status is displayed in the status display of this unit. Moreover, some displays are different from the description of KCA-BT100 Instruction Manual. Displays of KCA-BT100 Instruction Manual DISCONCT CONNECT PHN-DEL P-STATUS Actual displays on this unit HF Disconnect HF Connect Device Delete BT DVC Status

 

Tags

DS-A1X GR-492WF NV-VP21 Twinmate LCX-25C Gzmg505EK-GZ-mg505 CD1451B-06 VF400JU1 LTH T500 DMC-LX5 Amarys 320 XJR1300-2002 A-550R-S SL-CT480 2B26H77c5 SX-704RDS Smartphones KDC-BT8141U Promag 55 X-75-X-85 KLX250S WL-155 20PF5120-28 Scenic 320 TH7-raid LE32N73BD Dvdr5520H-31 GPS-CS1KA Hunter III Cs 500 Vado HD Parlant FX-350MS STR-K502P KEH-P8850 Maranello-2003 FJR1300-2005 Wiring Diagram KX-TG8202FX KV-25X5D Ecfwer6 Cobra 45WX Hearts Synkron 400 Dreamweaver Watch H57 SMS-2P KEH-P6600RS 2400TA Plus 4810T KT600 21PT166B JT-V22 RT-42PX12X TC-32LX85 PSS-390 15105D Suikoden III AL1914 FFH-185AD TX-34P300X BD-P2500 35 III RS21dcns SGH-E376 EMP-745 AVR-4806CI Samsung C270 RX-V3900 Barcelona MP35 IC-3230H-a-E Dvdr3440H-31 Urc 7562 Dampfsterilisator LT105 PRO Tt-1 DP-2500 Warlords-battlecry II Ixus110 IS Drumline 2 Volkswagen 1300 SGH-E316 Motorola E550 ST 4000 Guide -1120NA C2143S 040-240 B QSG6145 Automatic VGN-SZ71mn B PSR 290 DW433 CDR-M30 PCG-F270 Express Pentax 645 Of Iron TX-L32x10Y F1045AV Vista H

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101