The SRC Select mode can be set in MENU > SRC Select of <Function Control> (page 6). Auxiliary input source is initially set to OFF. Set Built in AUX described in <Function Control> (page 6) to ON. : Select MENU > Built in AUX When an optional accessory is connected, the source name for each device appears. When connection of the iPod is recognized, the source display changes from USB to iPod. USB (iPod) source is recognized as CD source on the connected unit.
To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to <Connecting Wires to Terminals> (page 51).
Volume control: [AUD] knob Turn the knob to adjust the volume. Subwoofer output: Control knob Switches between ON (SUBWOOFER ON) and OFF (SUBWOOFER OFF) each time pushing toward down for at least 2 seconds.
Function Control : [FNC] Pressing this button allows you to set various functions using the Control knob. Refer to <Function Control> (page 6). Category Function of setup item MENU Allows you to set up the environment. SETUP Allows you to set up the display and color. SOUND Allows you to set up the sound environment. BT Allows you to set up the Bluetooth function. Allows you to set up the each source function.
Favorite Control : Control knob You can recall the various registered functions by turning the Control knob. For example, you can recall and playback the playlist in iPod while listening to Tuner. Refer to <Favorite Control> (page 34).

Disc ejection: [0]

You can eject the disc for 10 minutes after switching off the engine.
USB device/iPod play: USB Terminal Connecting a USB device starts playback.

Tuner functions

FM band: Control knob Switches between FM1, FM2, and FM3 each time pushing toward up. AM band: Control knob Switches to AM when pushing toward down. Tuning: Control knob Changes the frequency when pushing toward left or right.
For the playable audio file, media, and devices, refer to <About Audio file> (page 45).

Device Regist* SPCL DVC Select* Phone Selection* Audio Selection* Device Delete* BT DVC Status* PIN Code Edit* Auto Answer* Mic Gain* NR Level*

38 * 36 * * *

Next page 3
Category Item SP Select* Call Beep* BT F/W Update* Beep Clock Adjust Date Adjust Date Mode SYNC DSI Illumi DIM Setting Front*/ F-R/ F-L ON*/ OFF OFF/ ON* 7 types OFF*/ ON OFF/ ON* OFF/ AUTO* / MNAL1 / MNAL2 OFF/ ON* 1 sec. 1 sec. 1 sec. Entry Setting overview Specify the voice output speaker. Output a beep from the speaker when a call comes in. 1 sec. Display the firmware version and update the firmware. Setting the operation check sound (beep sound) ON/ OFF. Sets the clock. Sets the date. Sets the date display mode. Synchronizing the RDS station time data and this units clock. DSI (Disabled System Indicator) of the unit blinks when the faceplate is removed. Sets whether the illumination is dimmed in conjunction with the light switch of the vehicle or it is dimmed constantly. Sets whether the key illumination color (KDC-X993/ KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U) is changed in conjunction with the key operation. Sets whether the key illumination color (KDC-X993/ KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U) is changed in conjunction with the sound volume. Turns off the display when no operation is performed. Dims the display part in conjunction with the light switch of the vehicle. Adjusting the display contrast. Switches the panel display between positive or negative. Turns on/off the built-in amplifier. Specifies the destination of AUX input sound when the Dual Zone function is turned on. Controls the connected LX amplifier. Switches to the traffic information automatically when the traffic bulletin starts. Switches to Monaural to decrease noise when reception is poor. Sets the receive mode of HD Radio. 1 sec. Displays the tag memory usage of HD Radio. Up to 50 tags can be registered to this unit. Turns ON / OFF the tag memory function of HD Radio. Displays the Electronic Serial Number of satellite radio. 1 sec. Sets the display when switched to AUX source. Specifies whether the text is scrolled automatically. Deletes Favorite Preset Memory. Sets whether to display AUX during source selection. Sets the CD read mode. 2 sec. Specifies whether to enable demonstration. * 27 Condition Page * * 38 26 *

ILM Effect**

ILM MSC SYNC

OFF*/ ON

Display DISP DIM
OFF/ ON* OFF/ AUTO* / MNAL1 / MNAL- 10 POSI1/ 2 / NEGA1/ 2 OFF/ ON* REAR*/ FRONT OFF*/ ON OFF/ ON* AUTO*/ DIGITAL/ ANALOG 00- 50 0FF/ ON* Auto*/ Manual OFF*/ ON 1*/ 2 OFF/ ON*
Contrast DISP N/P AMP Zone2 AMS Control** TI** CRSC*** Receive Mode

* * * 26 *

Tag Memory Tagging ESN= Name Set Scroll Favorite Delete Built in AUX CD Read DEMO Mode

1 sec.

Category SETUP

1 Enter the music number

Press the number buttons on the remote control.

2 Search the music

Press the [4] or [] button.
Cancelling Direct Music Search Press the [38] button.
Direct Music Search cannot be performed during playing of iPod, Music Editor media, Random play, or scan play.
Function of disc changers with remote control

Direct Disc Search

Searchs the disc by entering the disc number.

1 Enter the disc number

2 Search the disc
Press the [FM+] or [AM] button.
Cancelling Direct Disc Search Press the [38] button.
Direct Disc Search cannot be performed during playing of Random play or scan play. Input 0 to select disc 10.
Function of KDC-X993/ KDC-X693/ KDC-MP642U

Auto Memory Entry

Putting stations with good reception in the memory automatically.

Preset Tuning

Recalling the stations in the memory.
1 Enter Preset Tuning Select mode
1 Enter Auto Memory Entry mode
Select AUTO MEMORY. For how to select Function Control items, refer to <Function Control> (page 6).
2 Select a desired station in the memory

2 Open Auto Memory Entry

Turn the Control knob to select YES, and then press the Control knob. When 6 stations that can be received are put in the memory, auto memory entry closes.

3 Recall the station

Press the Control knob.
Cancelling Preset Tuning Press the [ ] button.

Station Preset Memory

Putting a station in the memory.

Direct Access Tuning

Entering the frequency and tuning.
1 Select the frequency to put in the memory
Push the Control knob towards right or left.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote control. is displayed.
2 Enter Preset Memory mode
3 Select the number to put in the memory

2 Enter the frequency

Press the number buttons on the remote control. Example: Desired frequency 92.1 MHz (FM) 810 kHz (AM) Press button [0], [9], [2], [1] [0], [8], [1], [0]
4 Determine the number to put in the memory
Press the Control knob for at least 2 seconds.
Cancelling the Preset Memory mode Press the [ ] button.
Cancelling Direct Access Tuning Press the [DIRECT] button on the remote control.
You can enter the FM band frequency in steps of a minimum of 0.1 MHz.

PTY (Program Type)

Selecting the Program Type below and searching for a station; Program Type Speech Music News Information Sports Talk Rock Classic Rock Adult Hits Soft Rock Top 40 Country Oldies Soft Nostalgia Display Speech Music News Inform Sports Talk Rock ClsRock AdltHit Soft Rck Top 40 Country Oldies Soft Nostalga Program Type Jazz Classical R&B Soft R & B Language Religious Music Religious Talk Personality Public College Weather Display Jazz Classicl R&B SoftR&B Language RelMusc RelTalk Persnlty Public College Weather

2 Enter Clock adjustment mode
Press the Control knob for at least 1 second. The clock display blinks.

2 Enter Date format mode

Press the Control knob for at least 1 second. The date is displayed.

3 Adjusting Clock

Operation type Selecting the item (hours or minutes) Adjust each item Operation Push the Control knob towards right or left. Turn the Control knob or push it towards up or down.

3 Adjusting Date

Turn the Control knob. Select from 7 types.

4 Exit Date format mode

4 Exit Clock adjustment mode
You can do this adjustment when MENU > SYNC in <Function Control> (page 6) is set to OFF.
Function of KDC-X993/ KDC-X693 When LX AMP unit connecting

AMP Control

You can control the LX AMP connected to the unit.
Date Adjustment 1 Select Date adjustment mode
Select MENU > Date Adjust. For how to select Function Control items, refer to <Function Control> (page 6).
1 Select AMP Control mode
Select MENU > AMS Control. For how to select Function Control items, refer to <Function Control> (page 6).

2 Enter AMP Control mode

2 Enter Date adjustment mode
Press the Control knob for at least 1 second. The date display blinks.
3 Select the AMP Control item for adjustment
Operation type Selecting the item (month, day, or year) Adjust each item Operation Push the Control knob towards right or left. Turn the Control knob or push it towards up or down.
For the details on the AMP Control item, see the Instruction manual attached to the LX AMP.
4 Adjust the AMP Control item
4 Exit Date adjustment mode

5 Exit AMP Control mode

Demonstration mode setting
Turning the demonstration mode ON/OFF.
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you, helping to deter theft.
1 Select Demonstration mode
Select MENU > DEMO Mode. For how to select Function Control items, refer to <Function Control> (page 6).

Removing the Faceplate

1 Press the Release button.

Drop open the faceplate.

2 Set the Demonstration mode
Press the Control knob for at least 2 seconds. Pressing this button for 2 seconds or longer toggles the setting between ON and OFF.
2 Drawing the faceplate to left side pull it to

forward and remove it.

3 Exit Demonstration mode
The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. Keep the faceplate in its faceplate case while detached. Do not expose the faceplate (and the faceplate case) to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
Reattaching the Faceplate
1 Align the shaft on the unit with the depression

curve. To change the band, move the cursor > to band#.
6 Exit Manual Equalizer Control mode
When iPod is selected in the section <Preset Equalizer curve select> (page 31), Manual Equalizer Control is disabled. You can select for each source.
Preset position selection
According to the listening position, select the position from the following settings so that the normal position of the sound environment can be compensated in accordance with the selected position; Compensation seat Not compensating. Front-Left seat Front-Right seat Front seat Range ALL Front-Left Front-Right Front

Manual position setting

Making fine adjustment of the value specified at Preset position selection per speaker.
1 Enter Manual position setting mode
Select SOUND > Control > Position > Manual Position. For how to select Function Control item, refer to <Function Control> (page 6).
Item FRONT / L FRONT / R REAR / L REAR / R SUBWOOFER / L SUBWOOFER / R INITIAL Setting overview Front Left speaker Front Right speaker Rear Left speaker Rear Right speaker Subwoofer Left Subwoofer Right Initialize the setting values.
1 Enter Preset position setting mode
Select SOUND > Control > Position > Preset Position. For how to select Function Control item, refer to <Function Control> (page 6).
2 Select the seat you want to compensate
3 Exit Preset position setting mode

3 Set the value

Turn the Control knob. Adjust between 0 and 5.58 feet. Press the Control knob for at least 1 second if you want to execute the INITIAL.
4 Exit Manual position setting mode

Audio Preset Memory

Registering the value setup by Sound Control.

Audio Preset Recall

Recalling the sound setup registered by <Audio Preset Memory> (page 33).

1 Setup Sound Control

Refer to the following operations to setup the Sound Control. - Cabin selection (page 29) - Speaker Setting (page 29) - DTA (Digital Time Alignment) setting (page 30) - XOver setting (page 30) - Manual Equalizer Control (page 31) - Preset position selection (page 32) - Manual position setting (page 32)

4 Put the Favorite Preset in the memory
2 Enter Favorite Preset Memory Delete mode
Cancelling the Favorite Preset Memory mode Press the [ ] button.
3 Select the number you want to delete
Turn the Control knob and push the center when the desired number is displayed. Delete? is displayed. Select ALL if you want to delete all.
Registering the operation procedure to an existing preset number overwrites the existing procedure. Register 6 pairs of Favorite Preset Memory. The memory cannot be erased by the Reset button. The same memory storage operation can be used for MENU, SETUP, and SOUND in the section <Function Control> (page 6). However, some currently selected sources cannot be recalled. For information on available sources, refer to Condition column in the section <Function Control>. If the items in the second or lower hierarchy are changed, the list in iPod will be changed by adding or deleting songs after the FAVORITE registration. Due to this, the list registered in this unit will be different from the list in iPod. The FAVORITE registration should be performed again after editing the items in iPod.
press the Control knob. Completed is displayed. Exit Favorite Preset Memory Delete mode.

Favorite Name Setting

Giving a name to Preset Memory registered to Favorite.
1 Enter Preset Recall mode
2 Retrieve the Preset Memory to change
3 Enter Favorite Name set mode
Press the Control knob for at least 1 second. Select the FAVORITE NAME SET display.

4 Enter the name

Operation type Move the cursor to the enter character position Select the character type* Select the characters Operation Push the Control knob towards right or left. Press the Control knob. Turn the Control knob or push it towards up or down.
* Each time you press the knob, the character type alternates between the types shown in the table below.

Character type

Alphabet upper case Alphabet lower case Numbers and symbols

2 Enter Bluetooth device registration mode
Press the Control knob for at least 1 second. Search for the Bluetooth device. When search is completed, Finished is displayed.
4 Go through the procedure of <Registering
Bluetooth device> (page 36) and complete the registration (pairing).
3 Select the Bluetooth device
Turn the Control knob and push the center when the desired Bluetooth device is displayed.
Cancelling Special device registration mode Press the [FNC] button for at least 1 second.

4 Input the PIN code

Operation type Select the numbers. Move to the next digit. Delete the last digit. Operation Turn the Control knob or push it towards up or down. Push the Control knob towards right. Push the Control knob towards left.
If the device name is not in the list, select Other Phones.

Registering PIN Code

By operating the Bluetooth device, specify the PIN code necessary for registering this unit.

5 Transmit the PIN code

Press the Control knob for at least 1 second. If Pairing Success is displayed, registration is completed.
1 Select PIN code edit mode
Select MENU > PIN Code Edit. For how to select Function Control item, refer to <Function Control> (page 6).
6 Return to the device list
7 Exit Bluetooth device registration mode
2 Enter PIN code edit mode
Press the Control knob for at least 1 second. The current setting of PIN code is displayed.
3 By operating the cell-phone, start the handsfree connection.

3 Input the PIN code

To clear the downloading completion message Press any button.
Up to 1000 phone numbers can be registered for each registered cell-phone. Up to 32 digits can be registered for each phone number along with up to 50* characters representing a name. (* 50: Number of alphabetic alphabetical characters. Fewer characters can be input depending on the type of characters.) To cancel downloading of the phone book data, operate the cell-phone.

4 Register a PIN code

Press the Control knob for at least 1 second. If Completed is displayed, registration is completed.
5 Exit PIN code edit mode
By default, 0000 is specified. A PIN code can be specified with up to eight digits.
Selecting the Bluetooth device You Wish to Connect
When two or more Bluetooth devices have already been registered, you need to select the Bluetooth device you wish to use.
Downloading the Phone Book
Download the phone book data from the cellphone to this unit so that you can use the Phone Book of this unit.

3 Select a message

Turn the Control knob. Each pushing of the Control knob towards right or left switches between telephone number or name and message reception date.

4 Display the text

Press the Control knob. Turning the Control knob scrolls the message. Pressing the Control knob again returns to the message list screen.

5 Exit SMS Inbox mode

The unopened message is displayed at the beginning of the list. Other messages are displayed in the order of reception. The SMS that has arrived when the cell-phone is not linked with Bluetooth cannot be displayed. Download the SMS. The short message cannot be displayed during downloading the SMS.
Satellite Radio tuner (Optional Accessory) control
Selecting Satellite Radio source Press the [SRC] button. Select the SAT/ SIRIUS/ XM display.

Preset Memory

Putting the channel in the memory.
1 Select the channel to put in the memory
You need to register to the service provider to receive the service by Satellite Radio. Consult the service provider if CALL TO SUBSCRIBE appears. The radio may take a little time to start receiving after you select the Satellite Radio source. If the signal reception fails, Acquiring Aignal/ No Signal appears.
Switching Seek Mode KDC-X993: Press the [AUTO] button for at least 1 second. KDC-HD942U/ KDC-X693/ KDC-MP642U: Press the [AUTO] button.
Display CHANNEL PRESET Operation Normal manual seeking control. Search in order of the channels in the Preset memory.
Cancelling the Preset Memory mode Press the [ ] button twice.
Only the channel number is stored. Category information is not stored.
Select the channel Push the Control knob towards right or left. Selecting the Preset Band Push the Control knob toward up. Each time you push the knob, the preset band alternates between the SR1, SR2, SR3 and SR4.
Recalling the channels in the memory.

Push the Control knob.

Category and Channel Search
Selecting the channel and category you want to receive.
Cancelling Preset Tuning Press the [ ] button twice.
1 Enter Category and Channel Search mode
Press the [ ] button twice.

2 Select the Category

Turn the Control knob to select Category, and then press the Control knob.

3 Select the Channel

Turn the Control knob to select Channel, and then press the Control knob.

Cancelling Category and Channel Search mode Press the [ ] button.
You cannot Channel search until the category information is acquired.

Channel Scan

Every receivable Channel is checked for 10 seconds.

1 Start Channel Scan

Select Channel Scan. For how to select Function Control items, refer to <Function Control> (page 6).
2 Release it when the channel you want to listen
to is received Press the Control knob.
Entering the channel and tuning.
Press the [DIRECT] button on the remote control.

2 Enter the channel

Press the number buttons.

3 Do Channel Search

If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. If you cannot receive any signal in the input Channel due to bad conditions on radio wave or other such problems, ACQUIRING SIGNAL/ NO SIGNAL appears.
Basic Operations of remote control

In Tuner/HD Radio source

VOL SRC
Band select Station select

[FM]/[AM] [4]/[] [1] [6]

ATT VOL

Recall preset stations

FM/AM 2-ZONE 09 DIRECT

In CD/USB source

(page 15, 16, 19)

Music select Pause/Play

[4]/[] [FM]/[AM] [38]

Folder/Disc select

In Satellite Radio tuner source
Preset band select Channel select [FM] [1] [6] [4]/[]

Recall preset channels

General control
Volume control Source select [VOL] [SRC]
Volume reduce [ATT] When the button is pressed again, the volume returns to the previous level.

In Audio control

Audio item select [AUD] [VOL] Adjust the Audio item
Refer to <Audio Control> (page 28) for the operation method, such as the procedures for Audio control and others operations.

Dual Zone control

Dual zone system on and off Rear channel volume control [2-ZONE] [5]/ []

Hands-free phone control

Making a call
Enter the dialing method selection mode Select a dialing method Number dial input Operation type Input a digit. Input +. Input #. Input *. Clear the entered phone number. Make a call [DIRECT] Operation [0] [9] buttons [] button [FM] button [AM] button [4] button [38] [ ]
Loading and Replacing battery
Use two AA/ R6-size batteries. Slide the cover while pressing downwards to remove it as illustrated. Insert the batteries with the + and poles aligned properly, following the illustration inside the case.

For operating KCA-BT200 (Optional)
For operation refer to Model-B-2 in the Instruction Manual of KCA-BT200, and the table below. Notation used in the KCA-BT200 Instruction Manual [38] button Press the [AUTO]/[TI] button. Operation Control knob Press the Control knob for at least 1 second.

About the Cell-Phone

This unit conforms to the following Bluetooth specifications: Version Bluetooth Standard Ver. 1.2 Profile HFP (Hands Free Profile) OPP (Object Push Profile) PBAP (Phonebook Access Profile) SYNC (Synchronization Profile) For the cell-phones verified for compatibility, access the following URL: http://www.kenwood.com/bt/information/
The units supporting the Bluetooth function have been certified for conformity with the Bluetooth Standard following the procedure prescribed by Bluetooth SIG. However, it may be impossible for such units to communicate with your cell-phone depending on its type. HFP is a profile used to make a hands-free call. OPP is a profile used to transfer data such as a phone book between units.
About the Bluetooth Audio player
This unit conforms to the following Bluetooth specifications: Version Bluetooth Standard Ver. 1.2 Profile A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile)
A2DP is a profile designed to transfer the music from an audio player. AVRCP is a profile designed to control playback and selection of music by an audio player.
About KENWOOD Music Editor of PC application
Music Editor is recorded in the CD-ROM attached to this unit. Refer to the users manual recorded in the installation CD-ROM and Help of Music Editor for the operation method of Music Editor. The unit can play USB device created by Music Editor. Information about Music Editor upgrade is put on the site, www.kenwood.com.

Menu Glossary

AMP Selecting OFF turns off the built-in amplifier. Turning off the built-in amplifier improves the quality of the sound from Preout. Auto Answer (Setting the Time Interval for Automatic Answer) This function automatically answers (responds to) a call after lapse of the preset time interval for automatic answer. OFF : Does not answer the phone call automatically. 0 : Automatically answers the phone call at once. 1s 99s : Automatically answers the phone call after lapse of seconds. DISP N/P Switches the panel display between positive or negative. In addition, you can reverse it in conjunction with the interior light. POSI1 : Displays the text in the positive. POSI2 : When the interior light is off, the text is displayed in the positive; when the interior light is on, the text is displayed in the negative. NEGA1 : Displays the text in the negative. NEGA2 : When the interior light is off, the text is displayed in the negative; when the interior light is on, the text is displayed in the positive. DTA (Digital Time Alignment) Make fine adjustment of the delay time of the speaker output specified at <Cabin selection> (page 29) to have a more suitable environment for your vehicle. The settings of the delay time are automatically identified and compensated by specifying the distances of each speaker from the center of the vehicle interior. 1 Set the front and rear positions and the height of the reference point to the position of the ears of the person sitting in the front seat, and set the right and left positions to the center of the vehicle interior. 2 Measure the distances from the reference point to the speakers. 3 Calculate the distance difference in accordance with the farthest speaker.

..4 5*

3 m (9.5 ft)..1

*Accessory of KDC-X993

Bluetooth antenna unit

2WARNING

If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.
About CD players/disc changers connected to this unit
If the CD player/ disc changer has the O-N switch, set it to the N position. The functions you can use and the information that can be displayed may differ depending on the models being connected.
Mounting and wiring this product requires skills and experience. For safetys sake, leave the mounting and wiring work to professionals. Make sure to ground the unit to a negative 12V DC power supply. Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. If the power is not turned ON (PROTECT is displayed), the speaker wire may have a short-circuit or touched the chassis of the vehicle and the protection function may have been activated. Therefore, the speaker wire should be checked. If your cars ignition does not have an ACC position, connect

For Good Reception

To assure good reception, note the following: Communicate with the cell-phone within the lineof-sight distance of 10 m (30 ft). The communication range becomes shorter depending on the surrounding environment. The communication range also becomes shorter when there is an obstacle between this unit and the cell-phone. The above maximum communication range (10 m) is not always assured. A broadcast station or walkie-talkie located nearby can interfere with communication due to too strong signal.
Connecting Wires to Terminals
To USB device USB connector (1m) when you do Do not remove the capThe connector not use the USB cable. will cause the unit to malfunction if it gets in touch with any metallic part of the vehicle. Microphone input (KDC-X993 only) Microphone (Accessory5)
Steering remote control (Light Blue/Yellow)

REMO.CONT

Rear output Front output Sub Woofer output
To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required.

FM/AM antenna input

Fuse (10A) Wiring harness (Accessory1) White White/Black Gray Gray/Black Green Green/Black Purple Purple/Black To rear left speaker To rear right speaker To front left speaker To front right speaker

HF Error 68:

Un Known: Device Full:
PIN Code NG: Connect NG: Pairing Failed:
Err No Matching: The voice tag is wrong. Voice cannot be recognized because of an unregistered voice tag, etc. Too Soft: Too Loud: Voice is too small and cannot be recognized. Voice is too large to be recognized.

Specifications

FM tuner section
Frequency range (200 kHz space) : 87.9 MHz 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 V/75 ) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.6 V/75 ) Frequency response (3 dB) : 30 Hz 15 kHz Signal to Noise ratio (MONO) : 70 dB Selectivity (400 kHz) : 80 dB Stereo separation (1 kHz) : 40 dB
Bluetooth section (KDC-X993)
Version : Bluetooth Ver. 1.2 Certified Frequency range : 2.402 2.480 GHz Output Power : +4dBm (MAX), 0dBm (AVE) Power Class 2 Maximum Communication range : Line of sight approx.10m (32.8 ft) Profiles : HFP (Hands Free Profile) : HSP (Headset Profile) : SPP (Serial Port Profile) : PBAP (Phonebook Access Profile) : OPP (Object Push Profile) : SYNC (Synchronization Profile) : A2DP (Advanced Audio Distribution Profile) : AVRCP (Audio/Video Remote Control Profile)
Digital FM tuner section (KDC-HD942U)
Frequency range (200 kHz space) : 87.5 MHz 107.9 MHz Frequency response : 20 Hz 20 kHz Signal to Noise ratio (STEREO) : 70 dB

CD player section

Laser diode : GaAlAs Digital filter (D/A) : 8 Times Over Sampling D/A Converter : 24 Bit Spindle speed : rpm (CLV) Wow & Flutter : Below Measurable Limit Frequency response (1 dB) : 10 Hz 20 kHz Total harmonic distortion (1 kHz) KDC-X993/KDC-X693: 0.008 % KDC-HD942U/KDC-MP642U: 0.010 % Signal to Noise ratio (1 kHz) KDC-X993/KDC-X693: 110 dB KDC-HD942U/KDC-MP642U: 105 dB Dynamic range : 93 dB MP3 decode : Compliant with MPEG-1/2 Audio Layer-3 WMA decode : Compliant with Windows Media Audio AAC decode : AAC-LC ".m4a" files

AM tuner section

Frequency range (10 kHz space) : 530 kHz 1700 kHz Usable sensitivity (S/N = 20dB) : 28 dB (25 V)
Digital AM tuner section (KDC-HD942U)