* 40 40

Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF. The connected cell-phone must have the SMS function to use the SMS function.
Location played with FILE SCAN - Audio file: First 10 seconds - Music Editor media: First 10 seconds or the part picked by Intro Skip. During Intro Skip, turn the control knob left or right to change the song. The scan method depends on the Music Editor setting. See the Music Editor help for details.

Display Settings

Display Type Selection
Shown below are examples of display types. Display TYPE [A] TYPE [B] TYPE [C] TYPE [D] Display Type Displays 4 to 5 lines of text. Displays a line of text and video. Displays a line of text and the spectrum analyzer. Displays the clock.

Text Display Selection

Changes displayed information on each source following;
1 Enter Display type selection mode
Select SETUP > Display Select > Type Select. For how to select Function Control item, refer to <Function Control> (page 6).
2 Select the Display type

Turn the Control knob.

In Tuner source for KDC-X993/ KDC-X693 Information Display Frequency & Program Service name (FM) Frequency/PS Title & Artist name* (FM) Title/Artist Station name* (FM) Station Name Radio text plus* (FM) Radio Text Plus Radio text (FM)* Radio Text Spectrum analyzer & Clock (TYPE [A]/[B]) Speana/Clock or Clock (TYPE [C]) or Clock Date Date Blank Blank
* Information of Radio text plus is displayed.
3 Exit Display type selection mode
For how to switch the text display information, refer to <Text Display Selection> (page 10). When TYPE [A] is selected, the status (ON/OFF indicator of each function) can be displayed on the first line, and the icon of the currently selected source and the text information title can be displayed on the left side by the following <Function Control> (page 6) operation. Status display: Select SETUP > Display Select > Status Side display: Select SETUP > Display Select > Side Select When TYPE [C] is selected, the spectrum analyzer can be switched by the following <Function Control> (page 6) operation. : Select SETUP > Display Select > Graphic Select

In HD Radio source for KDC-HD942U or KDC-X993/ KDC-X693/ KDC-MP642U with KTC-HR300 Information Display Frequency Frequency Station name Station Name Title & Artist name Title/Artist Album & Artist name Album/Artist Genre Genre Spectrum analyzer & Clock (TYPE [A]/[B]) Speana/Clock or Clock (TYPE [C]) or Clock Date Date Blank Blank In Tuner source for KDC-MP642U Information Frequency Spectrum analyzer & Clock (TYPE [A]/[B]) or Clock (TYPE [C]) Date Blank In CD & External disc source Information Disc title Track title Play time Spectrum analyzer & Clock (TYPE [A]/[B]) or Clock (TYPE [C]) Date Blank
Display Frequency Speana/Clock or Clock Date Blank
Display Disc title Track title P-Time Speana/Clock or Clock Date Blank
In Audio file/ iPod source Information Title & Artist name Album & Artist name Folder name File name Play time Play time bar (iPod only)* Spectrum analyzer & Clock (TYPE [A]/[B]) or Clock (TYPE [C]) Date Blank
1 Enter Text display selection mode
Display Title/Artist Album/Artist Folder name File name P-Time Time Bar Speana/Clock or Clock Date Blank Select SETUP > Display Select > Text Select. For how to select Function Control item, refer to <Function Control> (page 6).
2 Select the text display part
Push the Control knob towards up or down. The selected text display part blinks.

3 Select the text

* Can be displayed only on the bottom line of TYPE [A] text.
4 Exit Text display selection mode
In Standby/ Auxiliary input source Information Display Source name Source Name Clock Clock Date Date Blank Blank In SIRIUS/ SAT source (Optional) Information Channel Name Music Title Artist Name Composer name Category Name Label Name Comment Channel Number Spectrum analyzer & Clock (TYPE [A]/[B]) or Clock (TYPE [C]) Date Blank In XM source (Optional) Information Channel Name Title Name Category Name Channel Number Spectrum analyzer & Clock (TYPE [A]/[B]) or Clock (TYPE [C]) Date Blank
If the selected display item does not have any information, alternative information is displayed. When LX-AMP is connected, the item setup by the Display mode of LX-AMP is displayed. (Function of KDC-X993/ KDC-X693) Some items cannot be selected depending on the display type and row. When selecting Folder name while playing with iPod, names will be displayed depending on currently selected browsing items. If the iPod Control by Hand Mode is set to on while playing the iPod, iPod by Hand Mode is displayed. If all characters cannot be displayed while playing with iPod, the file number in the list is displayed.
Display Channel Name Song Title Artist Name Composer name Category Name Label Name Comment Channel Number Speana/Clock or Clock Date Blank
Information Music title Folder name File name
Display TITLE*** FLD*** FILE***
Display CHANNEL NAME TITLE NAME CATEGORY NAME CHANNEL NUMBER Speana/Clock or Clock Date Blank

Function of KDC-X993/ KDC-X693
Auxiliary Input Display Setting
Selects the display when changing to Auxiliary input source.
Illumination Color Selection
Selecting the Illumination Color of the panel.
1 Enter Illumination color selection mode
Select SETUP > Color Select. For how to select Function Control item, refer to <Function Control> (page 6).

1 Select the AUX source

Press the [SRC] button.
2 Enter Auxiliary input display setting mode
Select MENU > Name Set. For how to select Function Control item, refer to <Function Control> (page 6).
2 Select the place where you want to set the
Illumination Color Place All Display Right Left Display All Display Right Left
3 Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second. The presently selected Auxiliary input display is displayed.
4 Select the Auxiliary input display
Turn the Control knob. AUX/ DVD/ PORTABLE/ GAME/ VIDEO/ TV
Turn the Control knob and push the center when the desired item is displayed.
3 Select the Illumination Color
Turn the Control knob and push the center when the desired item is displayed. Select the color from Variable Scan/ Color1 Color 10/ User. Creating User color You can create your original color during the selection from Color1 Color10. The color you created can be called when you select User. 1. Press the Control knob for at least 1 second. Enter the detail color adjustment mode. 2. Set the color. Operation type Operation To select the color to adjust. Push the Control knob towards right (red, green, or blue) or left. To adjust color. Turn the Control knob or push it (Range: 0 9) towards up or down. 3. Press the Control knob. Exit the detail color adjustment mode.
5 Exit Auxiliary input display setting mode
When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes. The Auxiliary input display can be set only when the built-in auxiliary input or the auxiliary input of optional KCA-S220A is used. On the KCA-S220A, AUX EXT is displayed by default. AUX source is initially set to OFF. Before display setting, set Built in AUX described in <Function Control> (page 6) to ON. : Select MENU > Built in AUX

4 Exit Illumination color selection mode
Function of Audio file/ Internal CD source Function of iPod

Music Search

Selecting the music you want to listen to from the device or media being played now.

Music Search for iPod

Search for the song (in iPod) you want to play.
1 Enter Music Search mode

Press the [ ] button.

Press the [ ] button. SEARCH is displayed. Displays the current Audio file name.

2 Search for music

Operation type Movement between items Skip Search *1 Selection of item Return to previous item Return to Top menu Search by initial Operation Turn the Control knob. Push the Control knob towards right or left. Press the Control knob. Push the Control knob towards up. Push the Control knob towards up for at least 1 second. Push the Control knob towards down. Refer to the next section <Searching for Music by Initial>.

Audio file

Operation type Movement between folders/files Selection of folder/file Return to previous folder Return to root folder Operation Turn the Control knob or push it towards up or down. Press the Control knob or push it towards right. Push the Control knob towards left. Push the Control knob towards left for at least 1 second.
Scroll bar is displayed on the right side of the screen.
8 or 7 beside the displayed folder name indicates that this folder is preceded or followed by another folder. File name is displayed with indicator.
Cancelling the Music Search mode Press the [ ] button.
*1 Skip Search: The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected now. Set the ratio with Skip Search in <Function Control> (page 6). Keep pushing Control knob for 3 seconds or longer skips songs at 10% irrespective of the setting. Characters that are included in a song name but cannot be displayed are left blank. If no character included in a song name cannot be displayed, the browse item name and digits are displayed.

Internal CD source

Operation type Operation Movement between track Turn the Control knob or push it towards up or down. Selection of track Press the Control knob. Return to first track Push the Control knob towards left for at least 1 second.
Music Search cannot be performed during Random play.
Items Playlists Artists Albums Songs

Push the Control knob towards right or left.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote control. is displayed.
2 Enter Preset Memory mode
3 Select the number to put in the memory

2 Enter the frequency

Press the number buttons on the remote control. Example: Desired frequency 92.1 MHz (FM) 810 kHz (AM) Press button [0], [9], [2], [1] [0], [8], [1], [0]
4 Determine the number to put in the memory
Press the Control knob for at least 2 seconds.
Cancelling the Preset Memory mode Press the [ ] button.
Cancelling Direct Access Tuning Press the [DIRECT] button on the remote control.
You can enter the FM band frequency in steps of a minimum of 0.1 MHz.

PTY (Program Type)

Selecting the Program Type below and searching for a station; Program Type Speech Music News Information Sports Talk Rock Classic Rock Adult Hits Soft Rock Top 40 Country Oldies Soft Nostalgia Display Speech Music News Inform Sports Talk Rock ClsRock AdltHit Soft Rck Top 40 Country Oldies Soft Nostalga Program Type Jazz Classical R&B Soft R & B Language Religious Music Religious Talk Personality Public College Weather Display Jazz Classicl R&B SoftR&B Language RelMusc RelTalk Persnlty Public College Weather

Program Type Preset

Putting the Program Type in the Preset button memory and quick recall.
Presetting the Program Type
1 Select the Program Type to preset
Refer to <PTY (Program Type)> (page 17).
2 Enter Program Type Preset mode
Press the Control knob for at least 1 second.
Recalling the preset Program Type

1 Enter PTY mode

Speech and Music include the Program type shown below. Music: Black character item. Speech: White character item.
3 Select a desired Program Type in the memory

1 Select PTY mode

Select PTY SEARCH. For how to select Function Control items, refer to <Function Control> (page 6).
4 Recall the Program Type
2 Select the Program Type
Registration of a Station as a PTY
Registering a Program Type for stations with no PTY data.
3 Search for the selected Program Type station

4 Exit PTY mode

This function cannot be used during a traffic bulletin or AM reception. When the selected Program Type is not found, No PTY is displayed. Select another Program Type.

4 Make a call

Press the [DIRECT] button on the remote controller.
To erase the entered phone number digit by digit: Press the [4] button on the remote controller.
You can input max 32 digits.
Calling a number in the Phone Book 1 Enter dialing method mode
Calling a number in the call log 1 Enter dialing method mode
2 Select the call log mode
Press the Control knob. Select the OUT-CALL (outgoing call), IN-CALL (incoming call), or MISSED CALLS (missed call) display.
2 Select the Phone Book mode
Press the Control knob. Select the INITIAL display, proceed to step 3. Select the PHONE BOOK display, proceed to step 4.
3 Select a name or phone number
Turn the Control knob or push it towards up or down.
Operation type Move to the next character. Operation Turn the Control knob or push it towards right or left. Move to the next row. Push the Control knob towards up or down. Determine the selected initial. Press the Control knob.
Switching between Display Modes Press the [FNC] button. Pressing this button each time switches between name and telephone number.

4 Select the name

Operation type Move to the next phone number. Move to the next name. Operation Turn the Control knob or push it towards up or down. Push the Control knob towards right or left.
The outgoing call list and the incoming call list, and the missed call list are the lists of calls originated from and received at this unit. They are not the ones stored in the cell-phone memory.

5 Make a call

During search, a non-accent character such as u is searched for instead of an accent character such as.
Make a voice dialing call 1 Enter voice recognize mode
Select BT > Voice Recognize. For how to select Function Control item, refer to <Function Control> (page 6). Ready is displayed.
Registering to the Preset Dial Number List 1 Enter the phone number you wish to register
Enter the phone number with reference to the following: Dial a number/ Calling a number in the call log/ Calling a number in the Phone Book
PB Name? is displayed. When a beep is heard, utter the name within 2 second.

3 PN Type is displayed.

When a beep is heard, utter the category within 2 second.
This step is the same as step 3 of the procedure in <Calling a number in the Phone Book>. You can make a call or select a category.
Exit the Preset Memory mode Press the [ ] button.
If your voice cannot be recognized, a message is displayed. Pressing the Control knob allows you to retry voice input. (page 54) Both the name and category requires registration of a voice tag. (page 39) Audio sound is not output during voice recognize.

Display of phone number type (category)
The category items in the Phone Book are displayed as follows: Display GENERAL / HOME / OFFICE / MOBILE / OTHER / Information General Home Office Mobile Other
For details on the Bluetooth Audio player which can be connected, see <About the Bluetooth Audio player> (page 47). You need to register your Bluetooth Audio player before using it with this unit. For more details, see <Registering Bluetooth device> (page 36). You to select the Bluetooth audio player you wish to connect. Refer to <Selecting the Bluetooth device You Wish to Connect> (page 37).
Selecting Bluetooth Audio source Press the [SRC] button. Select the BT Audio display. For how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page 4). Pause and play Press the Control knob. Music Search Push the Control knob towards right or left.
All or some of the operations above cannot be performed if the Bluetooth audio player is not ready for remote control. Switching between Bluetooth audio sources does not start or stop playback automatically. Perform the operation for starting or stopping playback. Some audio players cannot be controlled remotely or reconnected after Bluetooth disconnection. Operate the main unit of the audio player to connect Bluetooth.
Activating Security Code Deactivating Security Code
To deactivate the Security Code function.
You can set the Security Code with a 4 digit number of your choice. The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up.
1 Select Security code mode
Select MENU > Security Clear For how to select Function Control items, refer to <Function Control> (page 6).
Select MENU > Security Set For how to select Function Control item, refer to <Function Control> (page 6).
2 Enter Security Code mode
Press the Control knob for at least 1 second. When Enter is displayed, [][][][] is also displayed.

3 Enter Security Code

Operation type Select the digits to enter Select the Security Code numbers Operation Push the Control knob towards right or left. Turn the Control knob or push it towards up or down.
4 Press the Control knob for at least 3 seconds.
Clear is displayed. The Security Code function deactivates.
4 Confirm the Security Code
Press the Control knob for at least 3 seconds. When Re-Enter is displayed, [][][][] is also displayed.
5 Exit Security Code mode
5 Do the step 3 through 4 operation, and reenter
the Security Code. Approved is displayed. The Security Code function activates.
If you enter the wrong Code in steps 3 through 4, repeat from step 3.
6 Exit Security Code mode
Entering Security Code The Security Code is required to use the audio unit when the unit is first used after removed from the battery power source or the Reset button is pressed.

Turn the [AUD] knob.
4 Exit Audio Control mode
Press any button. Press a button other than the [AUD] knob or [0] button.
1 Select the source to adjust

2 Enter Audio Setup mode

Press the [AUD] knob for at least 1 second.
3 Select the Audio Setup item to adjust
4 Adjust the Audio setup item

5 Exit Audio Setup mode

Sound Setup

Cabin selection

You can compensate the delay of the sound arrival time by selecting your environment from the following car types; Car type Not compensating. Compact car Full size car Station wagon Minivan Sport-utility vehicle Long Minivan Display OFF Compact Full size car Wagon Minivan SUV Minivan (Long) For how to select Function Control item, refer to <Function Control> (page 6).
2 Select the speaker you want to set
Setting speaker Front speaker Rear speaker Subwoofer Display FRONT REAR" SUB W"
3 Select the item you want to set
Item FRONT >SIZE >LOCATION >TWEETER >SIZE >LOCATION >SIZE Setting overview Speaker Size Front Speaker Location Front Speaker Select Tweeter Speaker Size Rear Speaker Location Rear Speaker Size Subwoofer
1 Enter Cabin select mode
Select SOUND > Setup > Cabin. For how to select Function Control item, refer to <Function Control> (page 6). REAR" SUB W"

2 Select the car type

Turn the Control knob and push the center when the desired item is displayed. Exit Cabin select mode.
Push the Control knob towards up or down.

4 Set the value

You can compensate the distances in more details by using <DTA> (page 30) function.
5 Repeat steps 2 to 4 to complete the speaker

settings.

6 Exit Speaker setting mode

Speaker setting

The speaker XOver is automatically set when the position and size of each speaker are selected from the following items; Item Speaker Size Front Range O.E.M., 4inch, 5inch, 6 1/2inch, 6 3/4inch, 7inch, 4x6, 5x7, 6x8, 6x9, 7x10 Door, On Dash, Under Dash None, Use None, O.E.M., 4inch, 5inch, 6 1/2inch, 6 3/4inch, 7inch, 4x6, 5x7, 6x8, 6x9, 7x10 Door, Rear Deck Minivan, Minivan (Long): 2nd Row, 3rd Row None, 6 1/2inch, 8inch, 10inch, 12inch, 15inch Over
Speaker Location Front Speaker Size Tweeter Speaker Size Rear

Speaker Location Rear

Speaker Size Subwoofer
1 Enter Speaker setting mode
Select SOUND > Setup > Speaker. English |
DTA (Digital Time Alignment) setting
Adjusting fine tuning of the speaker position compensation value specified at <Cabin selection> (page 29).

XOver setting

Fine adjusting the following setting values corresponding to the XOver values set in the section <Speaker Setting> (page 29); Adjustment Item Display Front High Pass Filter, FC Rear High Pass Filter Front High Pass Slope, SLOPE Rear High Pass Slope, Subwoofer Slope * Subwoofer Low Pass FC Filter Subwoofer Phase PHASE Range Through, 30*, 40, 50*, 60, 70, 80, 90*, 100, 120, 150, 180, 220, 250* (Hz) -6, -12, -18, -24 dB/Oct 30*, 40, 50*, 60, 70, 80, 90*, 100, 120, 150, 180, 220, 250*, Through (Hz) Reverse (180)/ Normal (0)

1 Enter DTA setting mode

Select SOUND > Setup > DTA. For how to select Function Control item, refer to <Function Control> (page 6).
Setting speaker Front speaker Rear speaker Subwoofer Display Front Rear" SW"
*Function of the KDC-X993/ KDC-X693.
3 Set the compensation value of the speaker
position Turn the Control knob and push the center when the desired value is displayed. Adjust between 0 and 14.44 feet. Refer to DTA of <Menu Glossary> (page 48) on how to set the compensation value. Exit DTA setting mode.
1 Enter XOver setting mode
Select SOUND > Setup > XOver. For how to select Function Control item, refer to <Function Control> (page 6).
Setting speaker Front speaker Rear speaker Subwoofer Display Front Rear" Subwoofer"
Item Front >FC >SLOPE Rear" >FC >SLOPE Subwoofer" >FC >SLOPE >PHASE Setting overview Front High Pass Filter Front High Pass Slope Rear High Pass Filter Rear High Pass Slope Subwoofer Low Pass Filter Subwoofer Slope Subwoofer Phase

4 Set the XOver value

5 Repeat steps 2 to 4 to complete the XOver

setting.

6 Exit XOver setting mode
Preset Equalizer curve select
You can select following Equalizer curve; Equalizer curve Natural User* Rock Pops Easy Top 40 Jazz Game iPod (During iPod source only) Display Natural User Rock Pops Easy Top 40 Jazz Game iPod

Manual Equalizer Control

You can adjust following Equalizer Control items;
KDC-X993/ KDC-X693 Adjustment Item Display Range BAND1 62.5 Hz Band 1 BANDHz Band 2 BANDkHz Band 3 BANDkHz Band 4 BANDkHz Band 5 Band level GAIN -9 +9 dB Bass Effect* EFCT ON/ OFF
*Can be only set for BAND1.
* The Equalizer curve set in the section <Manual Equalizer Control> is recalled.
1 Enter Preset Equalizer mode
Select SOUND > Control > EQ > Preset Equalizer. For how to select Function Control item, refer to <Function Control> (page 6).
2 Select the Equalizer curve
Turn the Control knob and push the center when the desired item is displayed. You can select from 22 Equalizer curve types for iPod when iPod is selected. Exit Preset Equalizer mode. Select the iPod Equalizer curve 1. Enter iPod Equalizer mode Press the Control button. 2. Select the iPod Equalizer curve Turn the Control knob and push the center when the desired item is displayed. Exit Preset Equalizer mode.
KDC-HD942U/ KDC-MP642U Adjustment Item Display Range BAND1 60/ 100/ 160/ 250/ 400 Hz Band 1 BAND2 630/ 1k/ 1.6k/ 2.5k Hz Band 2 BAND3 4k/ 6.3k/ 10k/ 16k Hz Band 3 Q Quality 0.25/ 0.5/ 1.0/ 2.0 Band level GAIN -9 +9 dB
1 Enter Manual Equalizer Control mode
Select SOUND > Control > EQ > Manual Equalizer. For how to select Function Control item, refer to <Function Control> (page 6).

2 By operating the cell-phone, send the phone
book data to this unit By operating the cell-phone, download the phone book data to this unit. During downloading: Downloading is displayed. After completion of downloading: Completed is displayed.
5 Exit Bluetooth device selection mode
If a cell-phone is already selected, deselect it, and then select a different one. If you cannot select a device using the audio player, connect the device with the audio player.
Deleting a Registered Bluetooth device
You can delete a registered Bluetooth device.
Adding a voice dialing command
Add a voice tag to the phonebook for voice dialing. You can register up to 35 voice tags.
1 Select Bluetooth device deletion mode
Select MENU > Device Delete. For how to select Function Control item, refer to <Function Control> (page 6).
1 Select Phonebook name edit mode
Select BT > Voice Tag > PB Name Edit. For how to select Function Control item, refer to <Function Control> (page 6).
2 Enter Bluetooth device deletion mode
2 Enter Phonebook name edit mode
3 Search for the name to register
Select the name to register with reference to 4 in <Calling a number in the Phone Book> (page 22). If a voice tag has already been registered for a name, * is displayed before the name.
4 Delete the selected Bluetooth device
5 Turn the Control knob to select YES, and then
press the Control knob. Delete is displayed.

4 Select a mode

Turn the Control knob. Display PB Name Regist PB Name Check* PB Name Delete* Return Operation Register a voice tag. Play a voice tag. Delete a voice tag. Return to step 2.
6 Exit Bluetooth device deletion mode
When a registered cell-phone is deleted, its Phone Book, log, SMS, and voice tag are also deleted.
* Displayed only when a name for which a voice tag has been registered is selected.
Select PB Name Regist (Regist)
Displaying the Firmware Version

In this manual, the word USB device is used for flash memories and digital audio players which have USB terminals.
About Satellite Radio tuner (Optional)
This unit supports Satellite Radio tuners which are released by SIRIUS and XM. Refer to the instruction manual of Satellite radio tuner.
For operating KCA-BT100 (Optional)
The following control methods of the function for this unit may be different from the Instruction manual; therefore, refer to the following supplemental instruction. <Dialing by Using the Quick Dialing Function> 1. Press the Control knob. Select the display other than INITIAL. 2. Press the [ ] button. 3. Select the number to recall by turning the Control knob. 4. Press the Control knob. <Registering to the Preset Dial Number List> 1. Operation is the same. Refer to the instruction manual of KCA-BT100. 2. Press the [ ] button. 3. Select the number to memory by turning the Control knob. 4. Press the Control knob for at least 1 seconds. <Deleting a Registered Cell-Phone> Refer to <Deleting a Registered Bluetooth device> (page 38) in this instruction manual. <Menu System> For how to operate Menu, refer to <Function Control> in this instruction manual. About display Cell-Phone Status is displayed in the status display of this unit. Moreover, some displays are different from the description of KCA-BT100 Instruction Manual. Displays of KCA-BT100 Instruction Manual DISCONCT CONNECT PHN-DEL P-STATUS Actual displays on this unit HF Disconnect HF Connect Device Delete BT DVC Status
About HD Radio (Optional)
When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD Radio tuner features. With the HD Radio tuner, you can use the similar functions of Tuner features. Refer to Tuner features for how to use the functions.
For operating KCA-BT200 (Optional)
For operation refer to Model-B-2 in the Instruction Manual of KCA-BT200, and the table below. Notation used in the KCA-BT200 Instruction Manual [38] button Press the [AUTO]/[TI] button. Operation Control knob Press the Control knob for at least 1 second.

About the Cell-Phone

This unit conforms to the following Bluetooth specifications: Version Bluetooth Standard Ver. 1.2 Profile HFP (Hands Free Profile) OPP (Object Push Profile) PBAP (Phonebook Access Profile) SYNC (Synchronization Profile) For the cell-phones verified for compatibility, access the following URL: http://www.kenwood.com/bt/information/

(accessory 5).

2 Remove oil and other dirt from the installation

surface.

3 Install the microphone. 4 Wire the microphone cable up to the hands-free
box with it secured at several positions using tape or the like.

Accessory5

Fix a cable with a commercial item of tape.
Peel the release coated paper of double-face adhesive tape to fix on the place shown above.
Adjust the direction of the microphone to the driver.
Install the microphone as far as possible from the cellphone.

Troubleshooting Guide

Some functions of this unit may be disabled by some settings made on this unit. What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems.
Cannot set up the subwoofer. No output from the subwoofer. Cannot set up the subwoofer position of Manual position setting. <Subwoofer output> of <Basic Operation> (page 4) is not set to On. The Dual zone function is enabled. <Audio Setup> (page 28) Cannot set up the subwoofer phase. The Low Pass Filter is set to Through. <XOver setting> (page 30) Cannot select the output destination of the subsource in the Dual zone. Cannot adjust the volume of the rear speakers. The Dual zone function is disabled. <Audio Setup> (page 28) Cannot register a security code. Cannot set up Display. <Demonstration mode Setting> (page 27) is not turned off.

General

The Touch Sensor Tone does not sound. The preout jack is being used. The Touch Sensor Tone cannot be output from the preout jack.

Tuner source

Radio reception is poor. The car antenna is not extended. Pull the antenna out all the way.

Disc source

The specified disc does not play, but another one plays instead. The specified CD is quite dirty. Clean the CD, referring to the CD cleaning of the section on <Handling CDs> (page 3). The disc is loaded in a different slot from that specified. Eject the disc magazine and check the number for the specified disc. The disc is severely scratched. Try another disc instead.

The Bluetooth audio player cannot be registered (pairing). The PIN code is fixed. When a PIN code is specified in the Instruction Manual for Bluetooth Audio Player, register it with reference to <Registering PIN Code> (page 36) to register the Bluetooth audio player. If no PIN code is specified in the Instruction Manual, try 0000. The sound from the Bluetooth audio player is discontinuous. The distance between this unit and audio player is too far. Move the audio player nearer to this unit. Another Bluetooth device is affecting the Bluetooth communication. Turn off another Bluetooth device. Move another Bluetooth device away from this unit. Another Bluetooth device or profile is used for communication. The downloading of the Phone book or the SMS disconnects the sound.

No Device:

N/A Device:
No Music Data/Error 15: The connected USB device contains no playable audio file. Media was played that does not have data recorded that the unit can play. USB ERROR: Some trouble may have occurred to the connected USB device. Remove the USB device, then cycle the power switch to ON. If the same display is repeated, use another USB device. Connection to the iPod has failed. Remove the USB device and then reconnect it. Confirm that the software for the iPod is the latest version. Too Long: The word or utterance is too long to be recognized.
No Phonebook: Data is not contained in the phone book. No Message: No Record: Memory Full: No short message in In Box. The voice tag is not registered in the phonebook. The number of voice tags reaches the maximum number to be registered in the phonebook.

iPod Error:

Favorite: No Memory: The procedure is not registered to Favorite Preset Memory No Access: The procedure preset with Favorite Control cannot be available. The preset content may not be recalled depending on the selected source or mode. No call.
USB REMOVE (Blink): The Remove mode has been selected for the USB device/iPod. You can remove the USB device/iPod safely. No Voice: NO Number: No Data: The calling party does not notify a caller ID. There is no phone number data. There is no outgoing call list. There is no incoming call list. There is no missed call list. There is no phone book list. The cell-phone has not been registered (pairing).
HD Memory Full: The tag memory of HD Radio is FULL. iPod Memory Full: The iPod memory is FULL. No Tag Function: iPod which does not support the tag memory is connected. N/A Channels: No receivable channel and category.

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth.
Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty, wipe them with a clean soft dry cloth. Reset button We recommend the use of <Activating Security Code> (page 39) to prevent theft. The characters conforming to ISO 8859-1 character set can be displayed. The RDS feature wont work where the service is not supported by any broadcasting station. There are places in this manual where lit indicators are described; however, the only time an indicator will light is in the following settings. When Indicator is selected as mentioned in <Text Display Switching> (page 18). The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable.
Before using this unit for the first time
This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the <Demonstration mode Setting> (page 51).
This Class B digital apparatus complies with Canadian ICES-003. English |

About DAB Tuner control

Refer to A group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the control method of DAB Tuner function. However, the following control methods of the function for this unit may be differed from the Instruction manual; therefore, refer to the following supplemental instruction. <Auto Ensemble Memory Entry> 1. Select the preset band for Auto Ensemble Memory Entry. 2. Press the [AME] button for at least 2 seconds. Open Auto Ensemble Memory Entry. After storing in the memory finishes, the number of the pre-set buttons and the ensemble label are displayed. <Searching by programme type and language> and <Languages to be displayed> in <Programme Type (PTY) Function> At the operation to press [DISP] button, use [AUTO] button instead.

2Warning

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. Location : Bottom Panel

What is the Multi-function Key System?
This unit is equipped with the Multi-function Key System that enables the operation of multiple functions with one button. For example, you can enter the Display Control Mode or turn ON/OFF the Random Play by pressing the [3] button during CD play.

Setting each function

The function display will show the controllable function of the [1] [6] button above the button. Pressing the [1] [6] button below the desired function enables the setting of the function.
Function displaying Button
Displaying the desired function
If five or more functions are available to be set with the [1] [6] button, they are divided into multiple function groups (referred to by sections in this manual) for registration. Press the [NEXT] button to switch the sections. Example: KDC-X790

1st section

S.MODE SCAN RDM

2nd section

S.MODE SCAN RDM REP FSEL

General features

Control knob

Release button

NEXT/ MENU
Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second.

Volume

Increasing Volume Turn the [VOL] knob clockwise. Decreasing Volume Turn the [VOL] knob counterclockwise.

Selecting the Source

Press the [SRC] button. Source required SIRIUS tuner (Optional accessory) Tuner or HD Radio (Optional accessory) CD External disc (Optional accessory) Auxiliary input Auxiliary input (Optional accessory) Standby (Illumination only mode) Display "SIRIUS" "TUNER" or "HD Radio" "Compact Disc" "CD Changer" "AUX" "AUX EXT" "STANDBY"

Attenuator

Turning the volume down quickly. Press the [ATT] button. Each time you press the button, the Attenuator turns ON and OFF. When the Attenuator is ON, "ATT" is displayed.

System Q

Selecting the best sound setting preset for different types of music.
Audio Control 1 Select the source to adjust

Press the [SRC] button.

1 Select the source to adjust
2 Enter Audio Control mode

Press the [VOL] knob.

2 Select the key function section
Press the [NEXT] button. Repeatedly press the button until "SYS.Q" is displayed above the [1] button. Refer to <Notes on Multi-function Key System> (page 9).
3 Select the Basic Audio item to adjust
Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.

3 Enter System Q mode

Press the [1] ("SYS.Q") button.
4 Adjust the Basic Audio item
Turn the [VOL] knob. Adjustment Item Display Range "Rear Volume" Rear Volume *1 Subwoofer level*2,3 "Sub-W Level" 15 +15 Bass level*4 "Bass Level" 8 +8 Middle level*4 "Middle Level" 8 +8 Treble level*4 "Treble Level" 8 +8 Balance "Balance" Left 15 Right 15 Fader*3 "Fader" Rear 15 Front 15 Exit Audio Control mode (Volume control mode)

4 Select the Sound type

Push the Control knob towards [4] or []. Each time the knob is pushed, the setting switches as shown below. Sound setting User memory Rock Pops Easy Top 40 Jazz Natural Display "USER" "ROCK" "POPS" "EASY" "TOP 40" "JAZZ" "NATURAL"
User memory: The values set on the <Audio Control> (page 11). Change each setting value with the <Speaker Setting> (page 13). First, select the speaker type with the Speaker setting.
*1 You can control this item when "2 ZONE" of <Audio Setup> (page 12) is set to "ON". *2 You can control this item when <Subwoofer Output> (page 13) is set to "SW ON". *3 You can control this item when "2 ZONE" of <Audio Setup> (page 12) is set to "OFF". *4 You can adjust these items in detail. Refer to <Adjusting the detail of Audio Control>(Page 12). (Function of the KDC-X790) *4 Source tone memory: Puts the set up value in the memory per source. (Detail Audio item is included)
5 Exit Audio Control mode
Press any button. Press a button other than the [VOL] knob, [ANG] and [ATT] button.

Function of the KDC-X790

Adjusting the detail of Audio Control
Among the Basic Audio items, you can adjust the Bass level, Middle level, and Treble level in detail.
You can exit the Audio Control mode at anytime by pressing any button except for [VOL], [ANG] and [ATT] buttons.

Audio Setup

Setting the Sound system, such as Cross over Network.
1 Select the Basic Audio item
Select the desired item to be set in detail from followings; Bass level Middle level Treble level For how to select Basic Audio items, see <Audio Control> (page 11).

2 Enter Audio Setup mode

Press the [VOL] knob for at least 1 second.
2 Enter Detail adjustment mode of Audio
Control Press the [VOL] knob for at least 1 second.

7 Source icon display part 8 Function item display 9 G-Analyzer display part
Display Type A/ Display Type B
Graphic part Display Switching
Changing the graphic Display.
5 Exit display control mode
Press the [6] ("RTN") button.
Under the display type other than "Display Type D", the function item is not displayed. When you select the display type other than "Display Type D", press [1] to [6] buttons or [NEXT] button. The function item will be displayed approximately 5 seconds. The indicator is displayed when the display type is set to "Display Type C" or "Display Type D". Change the information by the Display Type. Refer to the page on the following table for the methods to alternate by the Display Type. Display Type A B C D E Graphic 1 Text Upper 4 Middle 5 20 Lower 6 G-Analyzer 9 22
Push the Control knob towards [4] or []. Select the "Display Type A"/ "Display Type B" display.
5 Select the graphic display
Press the [3] ("Graph") button.
6 Select the graphic part display
Push the Control knob towards [4] or []. Each time you push the knob, the graphic display alternates between the displays shown in the table below. Graphic display Movie 1 Movie 2 Movie 3 (KDC-X790 only) *Downloaded movie Wallpaper & *Downloaded Wallpaper
* Function of the KDC-X790 * For Download movie and Download Wall Paper, refer to <Picture downloading> (page 49).
7 Exit display control mode
The setting of this function is available while "Display Type A"/ "Display Type B" is selected for the Display mode.
Display Type A/ Display Type B Display Type B

Wallpaper selecting

Selecting a wallpaper to display when Display Type is set to "Display Type A"/ "Display Type B".
Text Selection for Display
Selecting the text display.
1 Select the wallpaper display
Refer to <Graphic part Display Switching> (page 15).

2 Select the wallpaper

Display the wallpapers one after another Press the Control knob. Each time you press the knob, the Wallpaper scan is turned ON and OFF. When scan is ON, "SCAN" is displayed. When scan is ON, each wallpaper is displayed every several seconds. Select wallpaper manually 1 Turn the wallpaper scan OFF. Press the Control knob. Each time you press the knob, the Wallpaper scan is turned ON and OFF. 2 Select the wallpaper. Push the Control knob towards [FM] or [AM]. Each time you push the knob, the Wallpaper changes.
Push the Control knob towards [4] or []. Select the "Display Type B" display.

The text display in the Lower text display part In Tuner source
Information Indicator Clock Date Blank Radio text (FM) (KDC-X790 only) Display "Status" "Clock" "Date" "Blank" "Radio Text"*
Information Clock Date Blank Display "Clock" "Date" "Blank"
Information Indicator Clock Date Blank Disc title Track title Disc name Display "Status" "Clock" "Date" "Blank" "Disc Title"* "Track Title"* "DNPS"
Information Clock Date Blank Title Display "Clock" "Date" "Blank" "Title"*
Information Indicator Clock Date Blank Song title & Artist name Album name & Artist name Folder name File name Display "Status" "Clock" "Date" "Blank" "Title/Artist"* "Album/Artist"* "Folder Name" "File Name"
Display Type B/ Display Type C/ Display Type D

Font Color Select

Selecting the display font color.
Information Indicator Clock Date Blank Display "Status" "Clock" "Date" "Blank"
Push the Control knob towards [4] or []. Select the "Display Type B"/ "Display Type C"/ "Display Type D" display.
Information Indicator Clock Date Blank Title Display "Status" "Clock" "Date" "Blank" "Title"*
5 Enter Font Color select mode
Press the [4] ("COLOR") button.
Select the row (Display Type C/ Display Type D only) Push the Control knob towards [FM] or [AM]. The cursor ( ) moves to the selected text display part. Select the Font Color Push the Control knob towards [4] or [].
Information Indicator Clock Date Blank Channel Name Song Title Artist Name Composer name Category Name Label Comment Display "Status" "Clock" "Date" "Blank" "Channel Name" "Song Title" "Artist Name" "Composer Name" "Category Name" "Label Name" "Comment"
When you selected the Display Type B display, select an easy viewable font color. The "Status" item of Display type C/D can be set; however, the actual display color does not change. This function can be set for each display type.

Registration of a station as a PTY
Registering a Program Type for stations with no PTY data.
1 Receive the station you want to register 2 Select the Program Type to register
Refer to <PTY (Program Type)> (page 26).
3 Register the Program Type
Press the [AUTO] button for at least 2 seconds.
Confirming the Program Type Press the [AUTO] button. The Program Type is displayed for 5 seconds.

4 Exit PTY mode

Press the Control knob.

Program Type preset

Putting the Program Type in the Preset button memory and quick recall.
Presetting the Program Type
1 Select the Program Type to preset
2 Preset the Program Type
Speech and Music include the Program type below. Music: No.7 19, 21 Speech: No.3 6, 20, The Program Type can be put in the [1] [6] button memory and recalled quickly. Refer to the <Program Type preset> (page 27).
Press the desired [1] [6] button for at least 2 seconds.
Recalling the preset Program Type
3 Search for the selected Program Type
station Push the Control knob towards [4] or []. When you want to search for other stations, push toward [4] or [] of the Control knob again.
When selected Program Type is not found, "NO PTY" is displayed. Select another Program Type.
2 Recall the Program Type
CD/Audio file/External disc control features

Track number

Play time

IN indicator

Playing CD & Audio file
When there is no disc inserted
When a disc is inserted Press the [SRC] button. Select the "Compact Disc" display. Pause and play Press the Control knob. Each time you press the knob, the audio pauses or plays. Eject the disc

1 Open the panel

Press the [0] button.

2 Insert a disc.

When the faceplate slides open, it might interfere with the shift lever or other vehicle function. If this happens, pay attention to safety and move the shift lever or take an appropriate action to remove the obstacle, then operate the unit. Insert the disc horizontal to the slot. If you insert the Disc as you push down on the Disc, it may scratch the Disc.

1 Eject the disc

2 Return the panel to the original position
For KDC-X790, you can play the disc (ACDrive disc) made by Media Manager by the same operation. You can cancel the announcement when selecting the folder by <Voice Index> (page 50) during the play of the ACDrive. (KDC-X790 only) When a disc is inserted the "IN" indicator is ON.

Playing External Disc

Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display "CD Changer" "MD Changer" Disc player CD changer MD changer

Function of disc changer/ Audio file
Disc Search/Folder Search
Selecting the disc set in the Disc changer or the folder recorded on the Audio file media. Push the Control knob towards [FM] or [AM].

Direct Track/File Search

Doing Track/File Search by entering the track/file number.
Pause and play Press the Control knob. Each time you press the knob, the audio pauses or plays.
The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected.
1 Enter the track/file number
Press the number buttons on the remote control.
You can select Direct File Search up to 999. (KDC-X790 only)
2 Do Track/File Search Fast Forwarding and Reversing
Fast Forwarding Hold down toward [] with the Control knob. Release your finger to play the disc at that point. Reversing Hold down toward [4] with the Control knob. Release your finger to play the disc at that point.
There is no sound while the Audio file is being searched. You cannot fast Forwarding and Reversing while AAC file is being played. (KDC-MP732 only) You cannot fast Forwarding and Reversing depending on AAC file format. (KDC-X790 only)
Press the [4] or [] button.
Cancelling Direct Track/File Search Press the [38] button.
Function of disc changers with remote control

Direct Disc Search

Doing Disc Search by entering the disc number.

1 Enter the disc number

2 Do Disc Search Press the [+] or [] button.
Cancelling Direct Disc Search Press the [38] button.

Track/File Search

Searching for a song on the disc or in the Audio file folder. Push the Control knob towards [4] or [].
Track/File/Disc/Folder Repeat
Replaying the song, disc in the Disc changer or Audio file folder folder you are listening to.

Scan Play

Playing the first part of each song on the disc or Audio file folder you are listening to and searching for the song you want to hear.
Press the [NEXT] button. Repeatedly press the button until "REP" is displayed above the [4] button. Refer to <Notes on Multi-function Key System> (page 9).
Press the [NEXT] button. Repeatedly press the button until "SCAN" is displayed above the [2] button. Refer to <Notes on Multi-function Key System> (page 9).
2 Turn ON/OFF the Repeat Play
Press the [4] ("REP") button. Each time you press the button, the Repeat Play alternates between the modes shown in the tables below.

Press the [1] ("OK") button. The Folder Select mode releases, and the Audio file in the folder being displayed plays.
Press the [NEXT] button. Repeatedly press the button until "FSEL" is displayed above the [5] button. Refer to <Notes on Multi-function Key System> (page 9).
Cancelling the Folder Select mode Press the [2] ("EXIT") button.
2 Enter Folder Select mode
Press the [5] ("FSEL") button. "FOLDER SELECT" is displayed. During Select mode the folder information is displayed as shown below. Folder name display Displays the current folder name.
Function of the KDC-X790 Function of ACDrive disc

Switching the Play mode

Arrange the playing orders of the songs by categories.
Press the [NEXT] button. Repeatedly press the button until "S.MODE" is displayed above the [1] button. Refer to <Notes on Multi-function Key System> (page 9).
Folder number display Displays the number in the folder belonging to the currently selected folder.
The Folder select mode does not function when <All Random Play> (page 31) is ON.

2 Select the Play mode

Press the [1] ("S.MODE") button. Each time you press the button, the Play mode alternates between the modes shown on the table below. Play mode Category which is to be arranged "PlayList Mode" Play list order. "Genre Mode" By genre. "Artist Mode" By artist. "Album Mode" By album. "Folder Mode" By the folder recorded in Disc.
3 Select the folder level*
Push the Control knob towards [FM] or [AM]. With the [FM] button, you move 1 level down and with the [AM] button, 1 level up. Selecting a folder in the same level Push the Control knob towards [4] or []. With the [4] of the Control knob, you move to the previous folder, and with the [] of the Control knob, to the next folder. Returning to the top level* Press the [3] ("HOME") button.
* You cannot operate this function when <Switching the Play mode> (page 32) is set to other than "Folder Mode" while playing ACDrive.
The category information of each song is the data registered in Media Manager when ACDrive disc is being generated. You can cancel the announcement made when the mode is changed by <Voice Index> (page 50). You can select the advancement of the Play mode information by [AM] and [FM] knob.

Text/Title Scroll

Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob toward [FM] for at least 2 seconds.

Letter Seek

You can search for the song, you want to play, by selecting the initial of Genre name, Artist name, or Album name.

Channel Preset Memory

You cannot Channel search until the category information is acquired.
Putting the channel in the memory.
Cancelling Category and Channel Search mode Press the Control knob.

1 Select the preset band

Push the Control knob toward [FM].
2 Select the channel to put in the memory
Entering the channel and tuning.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote control.
4 Put the channel in the memory
Press the desired [1] [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, you can put 1 channel in the memory on each [1] [6] button.
Only the channel number is stored. Category information is not stored.

2 Enter the channel

Press the number buttons.

3 Do Channel Search

If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. You can set up until Channel number 223. If there is no signal in the input Channel, "No Channel" appears. (KTC-SR901: optional accessory)
Recalling the channels in the memory.
Press the [NEXT] button. Repeatedly press the button until "[1]" "[6]" are displayed above the [1] [6] buttons.

3 Recall the channel

Channel Scan
Checks every receivable Channel for 10 seconds.

1 Start Channel Scan

Press the [AUTO] button for at least 2 seconds. The channel number display blinks.
2 Release the button when the song you want
to hear is received Press the [AUTO] button for at least 2 seconds.
Text Scroll for SIRIUS tuner source
Scrolls the displayed channel name and other items. Push the Control knob toward [FM] for at least 2 seconds.

About HD Radio

When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD Radio tuner features. A portion of the setting methods including the Tuning Mode will change. With the HD Radio tuner, you can use the similar functions to <Station Preset Memory>, <Auto Memory Entry>, and <Preset Tuning> of Tuner features. Refer to Tuner features for how to use the functions.

Push the Control knob towards [FM] or [AM]. "G-Meter Reset": Reset the value of G-Meter. "G-Counter Reset": Reset the value of G-Counter. "G-Power Reset": Reset the value of G-Analyzer Horsepower Analysis.
6 Exit G-Analyzer Calibration setup mode

4 Reset the value

Press the Control knob for at least 2 seconds. "Reset OK" is displayed.
5 Exit G-Analyzer Reset mode
G-Analyzer Horsepower Gauge setup
Enter vehicle class and weight to calculate horsepower.
1 Select the G-Analyzer Horsepower Gauge
setup mode Push the Control knob towards [FM] or [AM]. Select the "Hp Gauge Setup" display.
2 Enter G-Analyzer Horsepower Gauge setup
mode Press the Control knob for at least 1 second. "Class Select" is displayed.

3 Select vehicle class

Push the Control knob towards [4] or []. Each time you push the knob, the vehicle class alternates between the modes shown in the table below. Display "Mid Size" "Full Size" "SUV" "Van/ Mini-Van" "Pickup Truck" "Sporty" "Compact"
4 Enter Weight Input mode
Press the Control knob. "Weight Input" is displayed.
5 Select the weight numbers
The weight input range is between 1000-9999 lbs.
6 Select the digits to enter
7 Repeat steps 5 and 6, and complete the

weight input.

8 Exit G-Analyzer Horsepower Gauge setup
mode Press the [NEXT] button.
G-Analyzer Horsepower Analysis
This measures the horsepower and displays graph and max power. It automatically saves the highest record.
5 To display the maximum power in the
section: Push the Control knob towards [4] or []. Each time you push the Control knob, the maximum power in the section is displayed.
Do not use G-Analyzer Horsepower Analysis on the Public roads. Do not use this product in any way that prevents you from driving safely. Follow all driving laws and use common sense when using this product.
6 Exit G-Analyzer Horsepower Analysis mode

Press the [NEXT] button.

Like your vehicles speedometer, G-Analyzer is no more than a measuring function. The HP or G value measured by this unit may not be completely accurate due to its simplified method of measurement. The G-Analyzer is only for reference and should not be used to confirm the horsepower specifications of your vehicle. Measuring after starting the car lowers the accuracy. The record will not be renewed if the measurement is discontinued. The graphs scale adjusts automatically to the horsepower value. The value of max power and record can be reset by <G-Analyzer Reset> (page 42).

Before alternating G-Analyzer Horsepower Analysis, you are required to setup <G-Analyzer Horsepower Gauge setup> (page 43).
1 Select the G-Analyzer Horsepower Analysis
mode Push the Control knob towards [FM] or [AM]. Select the "Horsepower" display.
2 Enter G-Analyzer Horsepower Analysis
mode Press the Control knob for at least 1 second. "Stop" is displayed. Previous max power and record are displayed.

3 Begin measurement

Press the Control knob. "Ready" is displayed.

G-Graphic Select

Select the picture to display on G-Graphic. Display "G-Graph : Default" "G-Graph : Custom" Setting Display default picture. Display downloaded picture.

4 Start the car

"Measure" is displayed. After 15 seconds of measurement, the result is displayed. Display the result The graph shows the variation in horsepower between 0.1 to 15.0 seconds. The maximum power is displayed in red and the markings provided at intervals of 5 seconds are displayed in blue.
Pressing the Control knob also begins the measurement. To prevent danger, push the control knob before starting the car.
G-Graphic pictures cannot be selected unless downloaded beforehand. To download G-Graphic pictures, refer to <Picture downloading> (page 49)

G-Analyzer Stop Watch

The control of stop watch can be started by GAnalyzer function.
Other than Standby mode/ When the Dual Zone System is ON

Dual Zone System Setting

Setting the Front channel and Rear channel sound in the Dual Zone System.
Do not use G-Analyzer stop watch on the Public roads.
1 Select G-Analyzer Stop Watch mode
Push the Control knob towards [FM] or [AM]. Select the "Stop Watch" display.
Display "Zone 2 : Rear" "Zone 2 : Front"
2 Enter G-Analyzer Stop Watch mode
Setting Sub source (Auxiliary input source) is to be rear channel. Sub source (Auxiliary input source) is to be front channel.
3 Enter Counter Ready mode

4 Start Count

When G in the vertical direction is detected during the travel, the count automatically starts. "Running" is displayed.
You can also start the counter by pressing the Control knob.

5 Stop Count

Press the Control knob. "Stop" is displayed.
The control will start again when you accelerate or press the Control knob. Do the operation after step3.

CD Read Setting

When there is a problem with playing a CD with special format, this setting plays the CD by force. Display "CD Read : 1" "CD Read : 2" Setting Play CD and Audio file. Play CD by force.

6 Exit Menu mode

When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes. The Auxiliary Input Display can be set only when the built-in auxiliary input or the auxiliary input of optional KCA-S210A is used.
Setting "CD Read : 2" cannot play Audio file. Some music CDs may not play even in the "CD Read : 2" mode.
8 Exit the downloading mode
Do not operate this unit,while "Downloading" is displayed to prevent data from being damaged. The number of files that can be downloaded. - Downloaded movie: 1 file - Wallpaper: 1 file - G-Graphic: 1 file When you download a new movie, it is overwritten to the currently downloaded movie. Also, when a new wallpaper is downloaded, it is overwritten to the currently downloaded wallpaper. There is no way to delete the downloaded pictures. The downloaded pictures can be used for display. <Graphic part Display Switching> (page 15) <Wallpaper selecting> (page 16) <G-Graphic Select> (page 44) When you cannot download the pictures to this unit, there may be a problem with the CD-R/CD-RW write method. Refer to the URL http://www.kenwood.net-disp.com, and rewrite the CD-R/CD-RW.

Picture downloading

Downloading movies, wallpapers and G-Graphic. You can use downloaded pictures for the display of this unit.

1 Insert a CD-R/CD-RW.

Insert a CD-R/CD-RW containing files to be downloaded into this unit. Refer to <Playing CD & Audio file> (page 28) for details. Our URL http://www.kenwood.net-disp.com describes how to make CD-R/CD-RW.

2 Enter Standby

3 Enter Menu mode
4 Select the downloading mode
Push the Control knob towards [FM] or [AM]. Select the "DISP Data DL" display.
5 Enter the downloading mode
Press the Control knob for at least 1 second. "File Check!!" is displayed.
6 Select files to be downloaded
PICTURE ENGINE Picture Engine is an application software distributed from Kenwood's official website. Utilizing this software, you can create an original still image file. As for the download of application, please browse "http://www. kenwood.net-disp.com/" for directions.

7 Start downloading

Press the Control knob for at least 2 seconds. "Downloading" is displayed. When the downloading finishes, "Finished Download" is displayed.
Picture downloading may take as long as 10 minutes.
Quantity (Movie, Picture)
Cancelling Downloading Press the [MENU] button.
Function of the KDC-X790 Function of ACDrive disc Other than Standby mode

General

The power does not turn ON. The fuse has blown. After checking for short circuits in the wires, replace the fuse with one with the same rating. Theres a source you cant switch. Theres no media inserted. Set the media you want to listen to. If theres no media in this unit, you cant switch to each source. The Disc changer isnt connected. Connect the Disc changer. If the Disc changer isnt connected to its input terminal, You cant switch to an external disc source. The memory is erased when the ignition is turned OFF. The ignition and battery wire are incorrectly connected. Connect the wire correctly, referring to the section on <Connecting Wires to Terminals>. Theres no loudness effect. Youre using Subwoofer preout. Loudness has no effect in Subwoofer preout. The TEL mute function does not work. The TEL mute wire is not connected properly. Connect the wire correctly, referring to the section on <Connecting Wires to Terminals>. The TEL mute function turns ON even though the TEL mute wire is not connected. The TEL mute wire is touching a metal part of the car. Pull the TEL mute wire away from the metal part of the car.

Tuner source

Disc source
Radio reception is poor. The car antenna is not extended. Pull the antenna out all the way. The antenna control wire is not connected. Connect the wire correctly, referring to the section on <Connecting Wires to Terminals>. The desired frequency cant be entered with the Direct Access Tuning. A station that cant be received is being entered. Enter a station that can be received. Youre trying to enter a frequency with a 0.01 MHz unit. What can be designated in the FM band is to 0.1 MHz. It isnt the set Traffic information sound volume. The set sound volume is less than the tuner sound volume. If the tuner sound volume is louder than the set sound volume,the tuner sound volume is used.
"AUX EXT" is displayed without achieving External disc control mode. Unsupported disc changer is connected. Use the disc changer mentioned in the <About CD players/disc changers connected to this unit> (page 4) of the section on <Safety precautions>. The specified disc does not play, but another one plays instead. The specified CD is quite dirty. Clean the CD. The disc is loaded in a different slot from that specified. Eject the disc magazine and check the number for the specified disc. The disc is severely scratched. Try another disc instead. A CD ejects as soon as it is loaded. The CD is quite dirty. Clean the CD, referring to the CD cleaning of the section on <About CDs> (page 7). Cant remove disc. The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF. The disc can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button. The disc wont insert. Theres already another disc inserted. Press the [0] button and remove the disc. Direct Search cant be done. Another function is ON. Turn Random Play or other functions OFF. Track Search cant be done. For the discs/folders first or last song. For each disc/folder, Track Search cant be done in the backward direction for the first song or in the forward direction for the last song.