Kenwood KDC-MP228 - Instruction Manual Car Audio, size: 1.9 MB
Here you can find all about Kenwood KDC-MP228 like manual and other informations. For example: ipod, wiring diagram, security code, price, code, wiring, aux.
Kenwood KDC-MP228 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Kenwood KDC-MP228 please write about it to help other people.
[ Report abuse or wrong photo | Share your Kenwood KDC-MP228 photo ]
User reviews and opinions
|Steemtray||4:45pm on Monday, May 3rd, 2010|
|Good Deck, but not without flaws. I got this deck as a gift and installed it with some moderately priced Alpine speakers. has a few flaws Stereo rocks very well, has plenty of power. Plays all sorts of discs well. Some things annoy me though.|
|SandeepRaheja||6:02pm on Saturday, April 10th, 2010|
|has a few flaws Stereo rocks very well, has plenty of power. Plays all sorts of discs well. Some things annoy me though. has a few flaws Stereo rocks very well, has plenty of power. Plays all sorts of discs well. Some things annoy me though.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.
About CD players/disc changers connected to this unit
KENWOOD disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any KENWOOD disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Unsupported connection may result in damage. Setting the "O-N" Switch to the "N" position for the applicable KENWOOD disc changers/ CD players. The functions that can be used and the information that can be displayed will differ depending on the models being connected.
You can damage both your unit and the CD changer if you connect them incorrectly.
To prevent damage to the machine, take the following precautions:
Make sure to ground the unit to a negative 12V DC power supply. Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Do not set the removed faceplate or the faceplate case in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers. Do not subject the faceplate to excessive shock, as it is a piece of precision equipment. When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit.
The LX AMP and the sensor unit cannot be connected simultaneously. You must connect any of them at a time.
Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.
Do Not Load 3-in. CDs in the CD slot
If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit.
This Class B digital apparatus complies with Canadian ICES-003.
If you experience problems during installation, consult your Kenwood dealer. If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. Press the reset button if the disc auto changer fails to operate correctly. Normal operation should be restored.
Before using this unit for the first time
CDs that arent round cant be used.
CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. Dont stick tape etc. on the CD. Also, dont use a CD with tape stuck on it.
When using a new CD
If the CD center hole or outside rim has burrs, use it after removing them with a ball pen etc.
CDs with coloring on the recording surface or that are dirty cant be used. This unit can only play the CDs with. It may not correctly play discs which do not have the mark. A CD-R or CD-RW that hasnt been finalized cant be played. (For the finalization process refer to your CD-R/CD-RW writing software, and your CDR/CD-RW recorder instruction manual.)
Dont place them in direct sunlight (On the seat or dashboard etc.) and where the temperature is high. Store CDs in their cases.
Dont use disc type accessories.
Clean from the center of the disc and move outward.
About MP3 and WMA
The playable MP3/WMA file (hereafter called Audio file) and the media format has the following limitation. The Audio file, which is out of the specification, may not able to be played normally, or the file and folder names may not be displayed correctly.
The maximum number of characters for this unit
File/Folder name: 64 (Joliet: 32) characters ID3 Tag/Contents property (WMA): 30 characters
File/Folder name is the number of the characters including the extensions ID3 Tag can only display the tag of Ver1.X.
Playable Audio file
MP3, WMA: KDC-MP2028/KDC-MP228
Attach the correct extension for the Audio file (MP3: ".MP3", WMA: ".WMA") Do not attach the extensions to the other files besides the Audio file. If it is attached, the file, which is not the Audio file, will be played and outputs the loud noise, and then the speaker will be damaged. The files with copy protection cannot be played.
Limitation of structure for the file and the folder
Maximum number of directory levels: 8 Maximum number of folders: 50 Maximum number of files per folder: 255 Maximum number of files and folders: 512
Playing order of the Audio file
The Audio file is played in the order which is written by writing soft. You may be able to set the playing order by writing the play sequence numbers such as "01" to "99" at the beginning of the file name. Example 0: Folder CD (1) : Audio file
Playable MP3 file
MPEG 1/2 Audio Layer 3 file Transfer bit rate: 8-320 kbps Sampling frequency : 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz
Playable WMA file
The file in accordance with Windows Media Audio (Except for the file for Windows Media Player 9 or after which applies the new functions) Transfer bit rate: 48-192 kbps Sampling frequency: 32, 44.1, 48 kHz
CD-ROM, CD-R, CD-RW (CD-RW with quick format cannot be used.)
When recording to the media up to the maximum capacity at once, the writing soft is set to "Disc at once".
Playable disc format
ISO 9660 Level 1/2 Joliet Romeo Long file name.
Playing order after ! play "#$%. Forward file search during # play (Push the Control knob to ) $ Forward folder search during " play (Push the Control knob to [FM]) : 34. When it is set to directory 4, skip to the folder before the same level by folder select (Push the Control knob to ) :2 When it is set to directory 3, makes the level up by folder select (Push the Control knob to [AM]) :2
Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second.
Increasing Volume Turn the [VOL] knob clockwise. Decreasing Volume Turn the [VOL] knob counterclockwise.
Selecting the Source
Press the [SRC] button. Source required SIRIUS tuner (Optional accessory) Tuner or HD Radio (Optional accessory) CD External disc (Optional accessory) Auxiliary input (Optional accessory) Standby (Illumination only mode) Display "SIRIUS" "TUNER" or "HD RADIO" "CD" "CD CH" "AUX EXT" "STANDBY"
Turning the volume down quickly. Press the [ATT] button. Each time the button is pressed, the Attenuator turns ON and OFF. When its ON, the "ATT" indicator blinks.
You can recall the best sound setting preset for different types of music.
5 Exit Audio Control mode
Press any button. Press the button which is not [VOL] knob and [ATT] button.
1 Select the source to set
Press the [SRC] button.
2 Select the Sound type
Press the [Q] button. Each time the button is pressed, the sound setting switches. Sound setting Natural Rock Pops Easy Top 40 Jazz Display "NATURAL" "ROCK" "POPS" "EASY" "TOP40" "JAZZ"
Setting the Sound system, such as Volume offset and Loudness.
1 Select the source for adjustment
2 Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
3 Select the Audio Setup item for adjustment
Press the [VOL] knob. Each time the knob is pressed, the items that can be adjusted switch as shown below.
When the System Q setting is changed, the Bass, Middle, and Treble set in audio control replace the System Q values. "USER" :The values set on the <Audio Control> (page 9). Each setting value is changed with the <Speaker Setting> (page 10). First, select the speaker type with the Speaker setting.
4 Adjust the Audio setup item
Turn the [VOL] knob. Adjustment Item Volume offset Loudness Display "V-OFF" "LOUD" Range ON/OFF
Audio Control 1 Select the source for adjustment
Volume offset: Each sources volume can be set as a difference from the basic volume. Loudness: Compensating for low and high tones during low volume. When it's ON, "LOUD" indicator is ON.
5 Exit Audio Setup mode
2 Enter Audio Control mode
Press the [VOL] knob.
3 Select the Audio item for adjustment
4 Adjust the Audio item
Turn the [VOL] knob. Adjustment Item Bass level Middle level Treble level Balance Fader Display "BAS L" "MID L" "TRE L" "BAL" "FAD" Range 8 +++8 Left 15 Right 15 Rear 15 Front 15 English |
Fine-tuning so that the System Q value is optimal when setting the speaker type.
In Audio file source (KDC-MP2028/MP228)
Information Song title & Artist name Album name (MP3 only) & Artist name Folder name File name Track number & Play time Clock Display "TITLE" "ALBUM" "FOLDER" "FILE" "P-TIME" "CLOCK"
1 Enter Standby
Press the [SRC] button. Select the "STANDBY" display.
2 Enter Speaker Setting mode
In HD Radio source
Information Station name Song title Frequency Clock Display "ST NAME" "TITLE" "FREQ" "CLOCK"
3 Select the Speaker type
Turn the [VOL] knob. Each time the knob is turned, the setting switches as shown below. Speaker type OFF For 5 & 4 in. speaker For 6x9 &6 in. speaker For the OEM speaker Display "SP OFF" "SP 5/4" "SP 6x9/6" "SP OEM"
In Auxiliary input source
Information Auxiliary input name Clock Display "SRC NAME" "CLOCK"
4 Exit Speaker Setting mode
3 Exit Switching Display mode
Press the Control knob.
Switching the information displayed.
1 Enter Switching Display mode
Press the Control knob for at least 1 second. "DISP SEL" is displayed.
If the Disc title, Track title, Song title & Artist name, or Album name & Artist name is selected when the disc which does not have Disc title, Track title, Song title, Album name, or Artist name is played, track number and play time are displayed.
2 Select the Display item
Push the Control knob to  or .
You can change the unit's display to dimmer. Press the [DIM] button for at least 1 second. Each time the button is pressed for 1 second, the Dimmer contol turns ON and OFF.
In Tuner source
Information Frequency Clock Display "FREQ" "CLOCK"
In CD & External disc source
Information Disc title (In External disc source or KDC-MP2028/MP228 internal CD source) Track title (In External disc source or KDC-MP2028/MP228 internal CD source) Track number & Play time Clock Display "D-TITLE" "T-TITLE" "P-TIME" "CLOCK"
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you, helping to deter theft.
The audio system automatically mutes when a call comes in.
Removing the Faceplate Press the Release button. The faceplate is unlocked, allowing you to detach it.
The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached. Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON.
Reattaching the Faceplate
1 Align the projections on the unit with the
grooves on the faceplate.
2 Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit.
1-6 ST indicator
AUTO/ Control AME knob
Preset station number
Selecting the station.
Choose the tuning mode. Press the [AUTO] button. Each time the button is pressed, the Tuning mode switches as shown below. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. Preset station seek "AUTO 2" Search in order of the stations in the Preset memory. Manual "MANUAL" Normal manual tuning control.
1 Select tuner source
Press the [SRC] button. Select the "TUNER" display.
2 Select the band
Push the Control knob to [FM] or [AM]. Each time the knob is pushed to [FM], it switches between the FM1, FM2, and FM3 bands.
3 Tune up or down band
During reception of stereo stations the "ST" indicator is ON.
Station Preset Memory
Putting the station in the memory.
1 Select the band
Push the Control knob to [FM] or [AM].
2 Select the frequency to put in the memory
3 Put the frequency in the memory
Press the desired   button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each   button.
Auto Memory Entry
Putting stations with good reception in the memory automatically.
1 Select the band for Auto Memory Entry
2 Open Auto Memory Entry
Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes.
Calling up the stations in the memory.
2 Call up the station
Press the desired   button.
CD/Audio file/External disc control features
VOL AUD SET UP Q MENU OFF SCAN RDM REP F.SEL
Playing CD & Audio file
When a disc is inserted Press the [SRC] button. Select the "CD" display.
When a CD is inserted, the "IN" indicator is ON.
Playing External Disc
Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display "CD CH" "MD CH" Disc player CD changer MD changer
Pause and play Press the control knob. Each time the knob is pressed, it pauses and plays. Eject the CD Press the  button.
Refer to <Playable Audio file> (page7) for the Audio file by models which can be played.
Playing the first part of each song on the disc you are listening to and searching for the song you want to listen to.
Function of the KDC-MP2028/KDC-MP228 Function of Audio file
Quickly selecting the folder you want to listen to.
1 Start Scan Play
Press the [SCAN] button. "TRAC SCN" (CD), "FILE SCN" (Audio file) is displayed.
1 Enter Folder Select mode
Press the [F.SEL] button. "F-SELECT" is displayed. During Select mode the folder information is displayed as shown below. Folder name display Displays the current folder name.
2 Release it when the song you want to listen
to is played Press the [SCAN] button.
Playing all the songs on the disc in random order. Press the [RDM] button. Each time the button is pressed, Random Play turns ON and OFF. When its ON, "DISC RDM" (CD), "FOLD RDM" (Audio file) is displayed.
When the Control knob is pushed to , the next song select starts.
2 Select the folder level
Push the Control knob to [FM] or [AM]. With the [FM] of the Control knob, you move 1 level down and with the [AM] of the Control knob 1 level up. Selecting a folder in the same level Push the Control knob to  or . With the  of the Control knob, you move to the previous folder, and with the  of the Control knob to the next folder. Returning to the top level Press the  button.
Function of disc changer
3 Decide the folder to play
Press the Control knob. The Folder Select mode releases, and the MP3/ WMA in the folder being displayed is played.
Magazine Random Play
Play the songs on all the discs in the disc changer in random order. Press the [M.RDM] button. Each time the button is pressed, the Magazine Random Play turns ON and OFF. When its ON, "MGZN RDM" is displayed.
Canceling the Folder Select mode Press the [F.SEL] button.
Scrolling the displayed CD text, Audio file text, or MD title. Hold down on [FM] of the Control knob for at least 1 second.
1 Select HD Radio source
Press the [SRC] button. Select the "HD RADIO" display.
With the HD Radio tuner, you can use the similar functions to <Tuning Mode>, <Station Preset Memory>, <Auto Memory Entry>, and <Preset Tuning> of Tuner features. Refer to Tuner features for how to use the functions.
2 Select the HF band
Push the Control knob to [FM]. Each time the knob is pushed to [FM], it switches between the HF1, HF2, and HF3 bands. Select the HA band Push the Control knob to [AM].
When you connect an HD Radio, Tuner features of the unit are disabled and switched to HD Radio tuner features. A portion of the setting methods including the Tuning Mode will change.
Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation.
4 Exit Menu mode
Press the [MENU] button.
When other items that are applicable to the basic operation method above are displayed, afterwards their setting content chart is entered. (Normally the uppermost setting in the chart is the original setting.) Also, the explanation for items that arent applicable (<Manual Clock Adjustment> etc.) are entered step by step.
1 Enter Menu mode
Press the [MENU] button for at least 1 second. "MENU" is displayed.
2 Select the menu item
Push the Control knob to [FM] or [AM]. Example: When you want to set the beep sound select the "BEEP" display.
3 Set the menu item
Push the Control knob to  or . Example: When "BEEP" is selected, each time the knob is pushed it switches "BEEP ON" or "BEEP OFF". Select 1 of them as the setting. You can continue by returning to step 2 and setting other items.
In Standby mode
Because authorization by the Security Code is required when its removed from the vehicle, personalizing this unit is by using the Security Code is a help in preventing theft.
Press the Reset button and when its removed from the battery power source
1 Turn the power ON. 2 Do the step 4 through 7 operation, and enter
the Security Code. "APPROVED" is displayed. The unit can be used.
When the Security Code function is activated, the code cant be changed and the function cant be released. Note, the Security Code can be set as the 4 digit number of your choice.
Touch Sensor Tone
Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Beep canceled.
2 Enter Menu mode
Press the [MENU] button for at least 1 second. When "MENU" is displayed, "SECURITY" is displayed.
3 Enter Security Code mode
Press the Control knob for at least 2 seconds. When "ENTER" is displayed, "CODE" is displayed.
Manual Clock Adjustment 1 Select Clock Adjustment mode
Push the Control knob to [FM] or [AM]. Select the "CLK ADJ" display.
4 Select the digits to enter
5 Select the Security Code numbers
6 Repeat steps 4 and 5, and complete the
2 Enter Clock Adjust mode
Press the Control knob for at least 2 seconds. The clock display blinks.
7 Confirm the Security Code
Press the Control knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is displayed.
3 Adjust the hours
Push the Control knob to [FM] or [AM]. Adjust the minutes Push the Control knob to  or .
8 Do the step 4 through 7 operation, and
reenter the Security Code. "APPROVED" is displayed. The Security Code function activates.
When the wrong Code is entered in steps 4 through 6, repeat from step 4.
4 Exit Clock adjustment mode
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display "DSI ON" "DSI OFF" Setting LED flashes. LED OFF.
Receive mode Auto mode
Operation Analog broadcasts and digital broadcasts will be switched automatically. When both are being transmitted, the digital broadcast will have priority. Digital broadcasts only. Analog broadcasts only.
4 Exit Receive mode
In FM reception
CRSC (Clean Reception System Circuit)
Temporarily have reception switched from stereo to mono to reduce multi-path noise when listening to the FM station. Display "CRSC ON" "CRSC OFF" Setting The CRSC is ON. The CRSC is OFF.
Even if the "AUTO" setting, and analog broadcast will be received during the reception of a ball game mode (non-delayed broadcast program).
In SIRIUS tuner source
SIRIUS ID (ESN) display
Displaying the SIRIUS ID (Electronic Serial Number) Display "ESN = ************"
Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF.
In HD Radio mode
Receive mode Setting
Sets the receive mode.
Serial & SIRIUS ID (ESN) It is especially important to retain the unit serial number and the electronic SIRIUS Identification number for service activation and potential future service changes.
1 Select the Receive mode
Push the Control knob to [FM] or [AM]. Select the "HDR MODE" display.
Auxiliary Input Display Setting
For selecting the display when switched to Auxiliary input source.
2 Enter Receive mode
Press the Control knob for at least 2 seconds.
3 Set the Receive mode
Push the control knob to [FM] or [AM]. Each time the knob is pushed, the Receive mode switches as shown below.
1 Select Auxiliary input source
Press the [SRC] button. Select the "AUX EXT" display.
3 Select Auxiliary input display setting mode
Push the Control knob to [FM] or [AM]. Select the "NAME SET" display.
4 Enter Auxiliary input display setting mode
Press the Control knob for at least 2 seconds. The presently selected Auxiliary input display is displayed.
Function of the KDC-MP2028/KDC-MP228 In Standby mode
CD Read Setting
When there is a problem on playing a CD with special format, this setting play the CD by force. Display "CD READ1" "CD READ2" Setting Play CD and MP3/WMA. Play CD by force.
5 Select the Auxiliary input display
Push the Control knob to  or . Each time the knob is pushed, the display switches as shown below. "AUX EXT" "TV" "DVD" "VIDEO" "GAME" "PORTABLE"
Setting "CD READ2" cannot play MP3/WMA. Some music CDs may not be played back even in the "CD READ2" mode.
6 Exit Auxiliary input display setting mode
Demonstration mode Setting
When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes.
Sets the demonstration mode.
1 Select the Demonstration mode
Push the Control knob to [FM] or [AM]. Select the "DEMO" display.
Setting the displayed text scroll. Display "SCL AUTO" "SCL MANU" Setting Repeats scroll. Scrolls when the display changes.
2 Set the Demonstration mode
Press the Control knob for at least 2 seconds. Each time the knob is pressed at least 2 seconds, the Demonstration mode switches as shown below. Display "DEMO ON" "DEMO OFF" Setting The Demonstration mode function is ON. Exit Demonstration mode (Normal mode).
Wiring harness (Accessory1)
Motor antenna control wire (Blue)
TEL mute wire (Brown)
White/Black White Gray/Black
To front right speaker
To rear left speaker
To rear right speaker
Ignition key switch
Car fuse box ACC Ignition wire (Red) Battery wire (Yellow)
Car fuse box (Main fuse)
Ground wire (Black) - (To car chassis)
Metal mounting strap (commercially available) Firewall or metal support
Japanese cars 1 Refer to the section <Removing the hard rubber 2
frame> (page 28) and then remove the hard rubber frame. Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws. T N
Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
N T T/N
T: Toyota cars N: Nissan cars
Self-tapping screw (commercially available) Screw (M4X8) (commercially available)
8 mm MAX.
Accessory3.for Nissan car Accessory4.for Toyota car
Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
During installation, do not use any screws except for those provided. The use of different screws might result in damage to the main unit. Damage may occur if a screwdriver or similar tool is used with excessive force during the installations.
Screwing the Faceplate on the Unit
If you want to fasten the faceplate to the main unit so that it does not fall off, screw in the provided screws in the holes shown below.
Never insert the screw in any other screw hole than the one specified. If you screw them in another hole, it will contact and may cause damage to the mechanical parts inside the unit.
Removing the Unit
Removing the hard rubber frame 1 Engage the catch pins on the removal tool and
remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure.
Removing the Unit 1 Refer to the section <Removing the hard rubber 2 3
frame> (page 28) and then remove the hard rubber frame. Remove the screw (M4 8) on the back panel. Insert the two removal tools deeply into the slots on each side, as shown.
No sound can be heard, or the volume is low. The fader or balance settings are set all the way to one side. Center the fader and balance settings. The input/output wires or wiring harness are connected incorrectly. Reconnect the input/output wires or the wiring harness correctly. See the section on <Connecting Wires to Terminals>. The values of Volume offset are low. Turn up the Volume offset, referring to the section on <Audio Setup> (page 9). The sound quality is poor or distorted. One of the speaker wires is being pinched by a screw in the car. Check the speaker wiring. The speakers are not wired correctly. Reconnect the speaker wires so that each output terminal is connected to a different speaker. The Touch Sensor Tone doesnt sound. The preout jack is being used. The Touch Sensor Tone cant be output from the preout jack.
Radio reception is poor. The car antenna is not extended. Pull the antenna out all the way. The antenna control wire is not connected. Connect the wire correctly, referring to the section on <Connecting Wires to Terminals>.
Disc source MP3/WMA source
"AUX EXT" is displayed without achieving External disc control mode. Unsupported disc changer is connected. Use the disc changer mentioned in the <About CD players/disc changers connected to this unit> (page 4) of the section on <Safety precautions>. The specified disc does not play, but another one plays instead. The specified CD is quite dirty. Clean the CD. The disc is loaded in a different slot from that specified. Eject the disc magazine and check the number for the specified disc. The disc is severely scratched. Try another disc instead. A CD ejects as soon as it is loaded. The CD is quite dirty. Clean the CD, referring to the CD cleaning of the section on <About CDs> (page 6). Cant remove disc. The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF. The disc can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button. The disc wont insert. Theres already another disc inserted. Press the  button and remove the disc. Direct Search cant be done. Another function is ON. Turn Random Play or other functions OFF. Track Search cant be done. For the discs/folders first or last song. For each disc/folder, Track Search cant be done in the backward direction for the first song or in the forward direction for the last song.
The CD player section is not operating properly. Reinsert the CD. If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center. A MP3/WMA is played with a format that this unit cant support. ---A copy-protected file is played. ----
E-05: BLANK: NO TRACK: E-15:
Specifications subject to change without notice.
FM tuner section
Frequency range (200 kHz space) : 87.9 MHz 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 V /75 ) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.6 V /75 ) Frequency response (3.0 dB) : 30 Hz 15 kHz Signal to Noise ratio (MONO) : 70 dB Selectivity (400 kHz) : 80 dB Stereo separation (1 kHz) : 40 dB
Maximum output power : 50 W x 4 Full Bandwidth Power (at less than 1% THD) : 22 W x 4 Tone action Bass : 100 Hz 10 dB Middle : 1 kHz 10 dB Treble : 10 kHz 10 dB Preout level / Load (during disc play) : 2000 mV/10 k Preout impedance : 600
Operating voltage (11 16V allowable) : 14.4 V Current consumption : 10 A Installation Size (W x H x D) : 182 x 53 x 155 mm 7-3/16 x 2-1/16 x 6-1/10 inch Weight : 3.1 lbs (1.40 kg)
AM tuner section
Frequency range (10 kHz space) : 530 kHz 1700 kHz Usable sensitivity (S/N = 20dB) : 28 dB (25 V)
CD player section
Laser diode : GaAlAs Digital filter (D/A) : 8 Times Over Sampling D/A Converter : 1 Bit Spindle speed : rpm (CLV) Wow & Flutter : Below Measurable Limit Frequency response (1 dB) : 10 Hz 20 kHz Total harmonic distortion (1 kHz) : 0.01 % Signal to Noise ratio (1 kHz) KDC-MP2028/MP228: 105 dB KDC-228: 93 dB Dynamic range : 93 dB Channel separation : 85 dB MP3 decode KDC-MP2028/MP228 : Compliant with MPEG-1/2 Audio Layer-3 WMA decode KDC-MP2028/MP228 : Compliant with Windows Media Audio
Table des matires
Prcautions de scurit Remarques Au sujet des CD Au sujet de MP3 et de WMA Caractristiques gnrales
Alimentation Slectionner la source Volume Attnuateur System Q Commande du son Configuration audio Rglage des enceintes Mode de commutation de laffichage Commande gradateur Faade antivol Sourdine TEL
A propos du menu
1 Enter Function Control mode
Press the [FNC] button.
2 Select a Function group.
Push the Control knob towards right or left. Pushing the Control knob towards left allows you to set the preference items (MENU, SETUP, or SOUND). Pushing the Control knob towards right allows you to set the currently selected source function item ON/OFF.
Displayed item is depending on currently selected source or mode. The mark in Condition column shows the condition to which the item is displayed.
: Can be set in other than standby state. : Can be set in standby state. : Can be set while Audio file source of CD/USB/iPod. : Can be set while Audio file source of CD/USB (excluding iPod). : Can be set while CD/ Disc changer source. : Can be set while CD source. : Can be set while Disc changer source. : Can be set during Tuner source. : Can be set during FM reception. : Can be set while accessing AUX source. : Can be set while HD Radio source. : Can be set during Satellite radio source. : Can be set only during playback of the iPod source. : Can be set for sources other than the standby source by setting 2 ZONE of <Audio Setup> (page 28) to ON. : Can be set while a cell-phone is connected. : Sets ILM MSC SYNC in the menu to OFF. : Refer to the reference page. : Can be set during all sources.
3 Select your desired setup item
Operation type Movement between items Selection of item Return to previous item Operation Turn the Control knob. Press the Control knob. Press the [FNC] button. Select Return at the bottom of the item list.
Repeat selection and determination until your desired setup item is selected. Example:
The Control knob is used for entry, but how to use the knob varies depending on the setting items.
: Press the Control knob to switch the settings. : Push the Control knob towards left or right to switch the settings. : Turn the Control knob to switch the settings. 1 sec. : Press the Control knob for 1 second to enter into the setting mode. 2 sec. : Press the Control knob for 2 seconds to enter into the setting mode.
In this manual, the above selection is indicated as Select MENU > DEMO Mode. Each items & will be when the source function is set to ON.
4 Make a setting
Push the Control knob towards up or down. Press the Control knob to set the source function item ON/OFF. Some items require you to keep pressing the Control knob for 1 or 2 seconds so that you can make a setting. For these items, the time during which you need to keep pressing the Control knob is displayed in the Entry column in seconds. For the functions accompanied by the description of the setting procedure and so forth, the reference page numbers are displayed.
Device Regist* SPCL DVC Select* Phone Selection* Audio Selection* Device Delete* BT DVC Status* PIN Code Edit* Auto Answer* Mic Gain* NR Level*
38 * 36 * * *
Next page 3
Category Item SP Select* Call Beep* BT F/W Update* Beep Clock Adjust Date Adjust Date Mode SYNC DSI Illumi DIM Setting Front*/ F-R/ F-L ON*/ OFF OFF/ ON* 7 types OFF*/ ON OFF/ ON* OFF/ AUTO* / MNAL1 / MNAL2 OFF/ ON* 1 sec. 1 sec. 1 sec. Entry Setting overview Specify the voice output speaker. Output a beep from the speaker when a call comes in. 1 sec. Display the firmware version and update the firmware. Setting the operation check sound (beep sound) ON/ OFF. Sets the clock. Sets the date. Sets the date display mode. Synchronizing the RDS station time data and this units clock. DSI (Disabled System Indicator) of the unit blinks when the faceplate is removed. Sets whether the illumination is dimmed in conjunction with the light switch of the vehicle or it is dimmed constantly. Sets whether the key illumination color (KDC-X993/ KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U) is changed in conjunction with the key operation. Sets whether the key illumination color (KDC-X993/ KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U) is changed in conjunction with the sound volume. Turns off the display when no operation is performed. Dims the display part in conjunction with the light switch of the vehicle. Adjusting the display contrast. Switches the panel display between positive or negative. Turns on/off the built-in amplifier. Specifies the destination of AUX input sound when the Dual Zone function is turned on. Controls the connected LX amplifier. Switches to the traffic information automatically when the traffic bulletin starts. Switches to Monaural to decrease noise when reception is poor. Sets the receive mode of HD Radio. 1 sec. Displays the tag memory usage of HD Radio. Up to 50 tags can be registered to this unit. Turns ON / OFF the tag memory function of HD Radio. Displays the Electronic Serial Number of satellite radio. 1 sec. Sets the display when switched to AUX source. Specifies whether the text is scrolled automatically. Deletes Favorite Preset Memory. Sets whether to display AUX during source selection. Sets the CD read mode. 2 sec. Specifies whether to enable demonstration. * 27 Condition Page * * 38 26 *
ILM MSC SYNC
Display DISP DIM
OFF/ ON* OFF/ AUTO* / MNAL1 / MNAL- 10 POSI1/ 2 / NEGA1/ 2 OFF/ ON* REAR*/ FRONT OFF*/ ON OFF/ ON* AUTO*/ DIGITAL/ ANALOG 00- 50 0FF/ ON* Auto*/ Manual OFF*/ ON 1*/ 2 OFF/ ON*
Contrast DISP N/P AMP Zone2 AMS Control** TI** CRSC*** Receive Mode
* * * 26 *
Tag Memory Tagging ESN= Name Set Scroll Favorite Delete Built in AUX CD Read DEMO Mode
2 Enter Auxiliary input display setting mode
Select MENU > Name Set. For how to select Function Control item, refer to <Function Control> (page 6).
2 Select the place where you want to set the
Illumination Color Place All Display Right Left Display All Display Right Left
3 Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second. The presently selected Auxiliary input display is displayed.
4 Select the Auxiliary input display
Turn the Control knob. AUX/ DVD/ PORTABLE/ GAME/ VIDEO/ TV
Turn the Control knob and push the center when the desired item is displayed.
3 Select the Illumination Color
Turn the Control knob and push the center when the desired item is displayed. Select the color from Variable Scan/ Color1 Color 10/ User. Creating User color You can create your original color during the selection from Color1 Color10. The color you created can be called when you select User. 1. Press the Control knob for at least 1 second. Enter the detail color adjustment mode. 2. Set the color. Operation type Operation To select the color to adjust. Push the Control knob towards right (red, green, or blue) or left. To adjust color. Turn the Control knob or push it (Range: 0 9) towards up or down. 3. Press the Control knob. Exit the detail color adjustment mode.
5 Exit Auxiliary input display setting mode
When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes. The Auxiliary input display can be set only when the built-in auxiliary input or the auxiliary input of optional KCA-S220A is used. On the KCA-S220A, AUX EXT is displayed by default. AUX source is initially set to OFF. Before display setting, set Built in AUX described in <Function Control> (page 6) to ON. : Select MENU > Built in AUX
4 Exit Illumination color selection mode
Function of Audio file/ Internal CD source Function of iPod
Selecting the music you want to listen to from the device or media being played now.
Press the number buttons on the remote control. Example of frequency input: Desired frequency 92.1 MHz (FM) 810 kHz (AM) Press button , ,  , , 
4 Do Direct Access Tuning
Function of KDC-X993 KDC-HD942U/ KDC-X693/ KDC-MP642U with KCA-BT200 (Optional Accessory)
For details on the Bluetooth cell-phone with the hands-free function, see <About the Cell-Phone> (page 46). You need to register your cell-phone before using it with this unit. For more details, see <Registering Bluetooth device> (page 36). If you have registered two or more cell-phones, you need to select one of them. For more details, see <Selecting the Bluetooth device You Wish to Connect> (page 37). To use the Phone Book, it must be downloaded to this unit in advance. For details, see <Downloading the Phone Book> (page 37). BT indicator is lit when a cell-phone is connected to this unit.
your cell-phone to return to the hands-free talk mode.
Adjusting the Voice Volume during a Call Turn the [AUD] knob.
Answering Another Incoming Call with the Current Call Suspended
1 Press the [AUD] button. 2 Turn the Control knob or push it towards up
or down. Select the ANSWER display.
3 Press the [AUD] button.
Answering another Incoming Call after Terminating the Current Call Press the [SRC] button or press the [ ] button for at least 1 second. Continuing the Current Call
Receiving a call
Answering a Phone Call Press the [AUD] button.
The following operations disconnect the line: - Insert a CD. - Connect a USB device. The name of the calling party is displayed if it has already been registered in the Phone Book.
or down. Select the REJECT display.
Answering the Waiting Call after Terminating the Current Call Press the [SRC] button or press the [ ] button for at least 1 second. Switching between the Current Call and Waiting Call Press the [AUD] button. Each pressing of this knob switches the calling party.
Rejecting an Incoming Call Press the [SRC] button or press the [ for at least 1 second.
Switching between Display Modes Press the [FNC] button. Pressing this button each time switches between name and telephone number.
4 Select the name
Operation type Move to the next phone number. Move to the next name. Operation Turn the Control knob or push it towards up or down. Push the Control knob towards right or left.
The outgoing call list and the incoming call list, and the missed call list are the lists of calls originated from and received at this unit. They are not the ones stored in the cell-phone memory.
5 Make a call
During search, a non-accent character such as u is searched for instead of an accent character such as.
Make a voice dialing call 1 Enter voice recognize mode
Select BT > Voice Recognize. For how to select Function Control item, refer to <Function Control> (page 6). Ready is displayed.
Registering to the Preset Dial Number List 1 Enter the phone number you wish to register
Enter the phone number with reference to the following: Dial a number/ Calling a number in the call log/ Calling a number in the Phone Book
PB Name? is displayed. When a beep is heard, utter the name within 2 second.
3 PN Type is displayed.
When a beep is heard, utter the category within 2 second.
This step is the same as step 3 of the procedure in <Calling a number in the Phone Book>. You can make a call or select a category.
Exit the Preset Memory mode Press the [ ] button.
If your voice cannot be recognized, a message is displayed. Pressing the Control knob allows you to retry voice input. (page 54) Both the name and category requires registration of a voice tag. (page 39) Audio sound is not output during voice recognize.
Display of phone number type (category)
The category items in the Phone Book are displayed as follows: Display GENERAL / HOME / OFFICE / MOBILE / OTHER / Information General Home Office Mobile Other
For details on the Bluetooth Audio player which can be connected, see <About the Bluetooth Audio player> (page 47). You need to register your Bluetooth Audio player before using it with this unit. For more details, see <Registering Bluetooth device> (page 36). You to select the Bluetooth audio player you wish to connect. Refer to <Selecting the Bluetooth device You Wish to Connect> (page 37).
1 Enter DTA setting mode
Select SOUND > Setup > DTA. For how to select Function Control item, refer to <Function Control> (page 6).
Setting speaker Front speaker Rear speaker Subwoofer Display Front Rear" SW"
*Function of the KDC-X993/ KDC-X693.
3 Set the compensation value of the speaker
position Turn the Control knob and push the center when the desired value is displayed. Adjust between 0 and 14.44 feet. Refer to DTA of <Menu Glossary> (page 48) on how to set the compensation value. Exit DTA setting mode.
1 Enter XOver setting mode
Select SOUND > Setup > XOver. For how to select Function Control item, refer to <Function Control> (page 6).
Setting speaker Front speaker Rear speaker Subwoofer Display Front Rear" Subwoofer"
Item Front >FC >SLOPE Rear" >FC >SLOPE Subwoofer" >FC >SLOPE >PHASE Setting overview Front High Pass Filter Front High Pass Slope Rear High Pass Filter Rear High Pass Slope Subwoofer Low Pass Filter Subwoofer Slope Subwoofer Phase
4 Set the XOver value
5 Repeat steps 2 to 4 to complete the XOver
6 Exit XOver setting mode
Preset Equalizer curve select
You can select following Equalizer curve; Equalizer curve Natural User* Rock Pops Easy Top 40 Jazz Game iPod (During iPod source only) Display Natural User Rock Pops Easy Top 40 Jazz Game iPod
Manual Equalizer Control
You can adjust following Equalizer Control items;
KDC-X993/ KDC-X693 Adjustment Item Display Range BAND1 62.5 Hz Band 1 BANDHz Band 2 BANDkHz Band 3 BANDkHz Band 4 BANDkHz Band 5 Band level GAIN -9 +9 dB Bass Effect* EFCT ON/ OFF
*Can be only set for BAND1.
* The Equalizer curve set in the section <Manual Equalizer Control> is recalled.
1 Enter Preset Equalizer mode
Select SOUND > Control > EQ > Preset Equalizer. For how to select Function Control item, refer to <Function Control> (page 6).
2 Select the Equalizer curve
Turn the Control knob and push the center when the desired item is displayed. You can select from 22 Equalizer curve types for iPod when iPod is selected. Exit Preset Equalizer mode. Select the iPod Equalizer curve 1. Enter iPod Equalizer mode Press the Control button. 2. Select the iPod Equalizer curve Turn the Control knob and push the center when the desired item is displayed. Exit Preset Equalizer mode.
KDC-HD942U/ KDC-MP642U Adjustment Item Display Range BAND1 60/ 100/ 160/ 250/ 400 Hz Band 1 BAND2 630/ 1k/ 1.6k/ 2.5k Hz Band 2 BAND3 4k/ 6.3k/ 10k/ 16k Hz Band 3 Q Quality 0.25/ 0.5/ 1.0/ 2.0 Band level GAIN -9 +9 dB
1 Enter Manual Equalizer Control mode
Select SOUND > Control > EQ > Manual Equalizer. For how to select Function Control item, refer to <Function Control> (page 6).
2 Select the band you want to set
Push the Control knob towards up or down. Move the cursor > to the desired item.
You can select for each source.
5 Repeat steps 2 to 4 to complete the Equalizer
curve. To change the band, move the cursor > to band#.
6 Exit Manual Equalizer Control mode
When iPod is selected in the section <Preset Equalizer curve select> (page 31), Manual Equalizer Control is disabled. You can select for each source.
Preset position selection
According to the listening position, select the position from the following settings so that the normal position of the sound environment can be compensated in accordance with the selected position; Compensation seat Not compensating. Front-Left seat Front-Right seat Front seat Range ALL Front-Left Front-Right Front
Manual position setting
Making fine adjustment of the value specified at Preset position selection per speaker.
1 Enter Manual position setting mode
Select SOUND > Control > Position > Manual Position. For how to select Function Control item, refer to <Function Control> (page 6).
Item FRONT / L FRONT / R REAR / L REAR / R SUBWOOFER / L SUBWOOFER / R INITIAL Setting overview Front Left speaker Front Right speaker Rear Left speaker Rear Right speaker Subwoofer Left Subwoofer Right Initialize the setting values.
1 Enter Preset position setting mode
Select SOUND > Control > Position > Preset Position. For how to select Function Control item, refer to <Function Control> (page 6).
2 Select the seat you want to compensate
3 Exit Preset position setting mode
3 Set the value
Turn the Control knob. Adjust between 0 and 5.58 feet. Press the Control knob for at least 1 second if you want to execute the INITIAL.
4 Exit Manual position setting mode
Audio Preset Memory
Registering the value setup by Sound Control.
Audio Preset Recall
Recalling the sound setup registered by <Audio Preset Memory> (page 33).
1 Setup Sound Control
Refer to the following operations to setup the Sound Control. - Cabin selection (page 29) - Speaker Setting (page 29) - DTA (Digital Time Alignment) setting (page 30) - XOver setting (page 30) - Manual Equalizer Control (page 31) - Preset position selection (page 32) - Manual position setting (page 32)
1 Select the source
2 Enter Audio preset recall mode
Select SOUND > Preset > Recall. For how to select Function Control items, refer to <Function Control> (page 6).
3 Select the number to recall in the memory
Turn the Control knob and push the center when the desired number is displayed.
2 Enter Audio preset memory mode
Select SOUND > Preset > Memory. For how to select Function Control items, refer to <Function Control> (page 6).
4 Turn the Control knob to select YES, and then
press the Control knob. Recall Completed is displayed.
5 Exit Audio preset recall mode
press the Control knob. Memory Completed is displayed.
The User of <Preset Equalizer curve select> (page 31) is changed to the value which was recalled. The Equalizer curve is changed to the value which was recalled by the selected source.
5 Exit Audio preset memory mode
Register 6 pairs of Audio Preset Memory. Number 1: When you press the Reset, all the sources will be the setting value which is registered. Number 1 and 2: The memory cannot be erased by the Reset button. This function cannot be registered when the iPod Equalizer set in <Preset Equalizer curve select> (page 31).
Favorite Preset Memory
Registering the operation procedure to select your favorite broadcast station or iPod Playlists/ Artists, etc.
Favorite Preset Recall
Retrieving an item registered to Favorite.
1 Enter Favorite Preset Recall mode
1 Display a favorite item
Source TUNER/SIRIUS/XM/HD iPod Hands-free phone Registerable items Preset Memory List selection screen for Playlists/ Artists/ Albums, etc. Telephone number retrieval.
4 Enter the name
Operation type Move the cursor to the enter character position Select the character type* Select the characters Operation Push the Control knob towards right or left. Press the Control knob. Turn the Control knob or push it towards up or down.
* Each time you press the knob, the character type alternates between the types shown in the table below.
Alphabet upper case Alphabet lower case Numbers and symbols
5 Exit Favorite Name Set mode
Push the Control knob towards right or left to select ENTER, and then press the Control knob.
Cancelling the Favorite Name set Press the [FNC] button.
Registering Bluetooth device
To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to five Bluetooth devices to this unit. Press the [FNC] button.
This unit allows up to eight digits to be input for a PIN code. If a PIN code cannot be input from this unit, it can be input from the Bluetooth device. If there are 5 or more Bluetooth devices registered, you cannot register a new Bluetooth device. If the error message appears even though the PIN code is correct, try <Registering Special Bluetooth device> (page 36).
When registering from Bluetooth devices
1 Turn on the control unit. 2 Start registering a unit by operating the
Bluetooth device By operating the Bluetooth device, register the hands-free unit (pairing). Select KENWOOD BT CD/R-2P2/ KENWOOD BT200 from the list of connected units.
Registering Special Bluetooth device
Allow registration of a special device that cannot be registered normally (pairing).
3 Enter a PIN code
Input the PIN code registered as mentioned in <Registering PIN Code> (page 36). Check that registration is complete on the Bluetooth device.
1 Select Special device registration mode
Select MENU > SPCL DVC Select. For how to select Function Control item, refer to <Function Control> (page 6).
4 By operating the Bluetooth device, start handsfree connection.
When registering from this unit
2 Enter Special device registration mode
Press the Control knob for at least 1 second. A list is displayed.
1 Select Bluetooth device deletion mode
Select MENU > Device Delete. For how to select Function Control item, refer to <Function Control> (page 6).
1 Select Phonebook name edit mode
Select BT > Voice Tag > PB Name Edit. For how to select Function Control item, refer to <Function Control> (page 6).
2 Enter Bluetooth device deletion mode
2 Enter Phonebook name edit mode
3 Search for the name to register
Select the name to register with reference to 4 in <Calling a number in the Phone Book> (page 22). If a voice tag has already been registered for a name, * is displayed before the name.
4 Delete the selected Bluetooth device
5 Turn the Control knob to select YES, and then
press the Control knob. Delete is displayed.
4 Select a mode
Turn the Control knob. Display PB Name Regist PB Name Check* PB Name Delete* Return Operation Register a voice tag. Play a voice tag. Delete a voice tag. Return to step 2.
6 Exit Bluetooth device deletion mode
When a registered cell-phone is deleted, its Phone Book, log, SMS, and voice tag are also deleted.
* Displayed only when a name for which a voice tag has been registered is selected.
Select PB Name Regist (Regist)
Displaying the Firmware Version
Display the version of the firmware of this unit.
5 Register a voice tag (first)
Press the Control knob. Enter Voice 1 is displayed. When a beep is heard, utter a voice tag within 2 seconds.
1 Enter Bluetooth Firmware update mode
Select MENU > BT F/W Update. For how to select Function Control item, refer to <Function Control> (page 6).
6 Confirm the voice tag (second)
Press the Control knob. Enter Voice 2 is displayed. When a beep is heard, utter the same voice tag as that you uttered in step 4 within 2 seconds. Completed is displayed.
2 Enter Bluetooth Firmware update mode
Press the Control knob for at least 1 second. The firmware version appears.
3 Exit Bluetooth Firmware update mode
7 End registration
Press the Control knob. Return to step 2. You can register another voice tag continuously.
Turn the Control knob to select Channel, and then press the Control knob.
Cancelling Category and Channel Search mode Press the [ ] button.
You cannot Channel search until the category information is acquired.
Every receivable Channel is checked for 10 seconds.
1 Start Channel Scan
Select Channel Scan. For how to select Function Control items, refer to <Function Control> (page 6).
2 Release it when the channel you want to listen
to is received Press the Control knob.
Entering the channel and tuning.
Press the [DIRECT] button on the remote control.
2 Enter the channel
Press the number buttons.
3 Do Channel Search
If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. If you cannot receive any signal in the input Channel due to bad conditions on radio wave or other such problems, ACQUIRING SIGNAL/ NO SIGNAL appears.
Basic Operations of remote control
In Tuner/HD Radio source
Band select Station select
[FM]/[AM] /  
Recall preset stations
FM/AM 2-ZONE 09 DIRECT
In CD/USB source
(page 15, 16, 19)
Music select Pause/Play
/ [FM]/[AM] 
In Satellite Radio tuner source
Preset band select Channel select [FM]   /
Recall preset channels
Volume control Source select [VOL] [SRC]
Volume reduce [ATT] When the button is pressed again, the volume returns to the previous level.
In Audio control
Audio item select [AUD] [VOL] Adjust the Audio item
Refer to <Audio Control> (page 28) for the operation method, such as the procedures for Audio control and others operations.
Dual Zone control
Dual zone system on and off Rear channel volume control [2-ZONE] / 
Hands-free phone control
Making a call
Enter the dialing method selection mode Select a dialing method Number dial input Operation type Input a digit. Input +. Input #. Input *. Clear the entered phone number. Make a call [DIRECT] Operation   buttons  button [FM] button [AM] button  button  [ ]
Loading and Replacing battery
Use two AA/ R6-size batteries. Slide the cover while pressing downwards to remove it as illustrated. Insert the batteries with the + and poles aligned properly, following the illustration inside the case.
An online manual about audio files is put on the site, www.kenwood.com/audiofile/. On this online manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online manual as well.
About USB device
When the USB device is connected to this unit, it can be charged up provided that this unit is powered. Install the USB device in the place where it will not prevent you from driving your vehicle properly. You cannot connect a USB device via a USB hub and Multi Card Reader. Take backups of the audio files used with this unit. The files can be erased depending on the operating conditions of the USB device. We shall have no compensation for any damage arising out of erasure of the stored data. No USB device comes with this unit. You need to purchase a commercially available USB device. When connecting the USB device, usage of the CA-U1EX (option) is recommended. Normal playback is not guaranteed when a cable other than the USB compatible cable is used. Connecting a cable whose total length is longer than 5 m can result in abnormal playback. English |
In this manual, the word USB device is used for flash memories and digital audio players which have USB terminals.
About Satellite Radio tuner (Optional)
This unit supports Satellite Radio tuners which are released by SIRIUS and XM. Refer to the instruction manual of Satellite radio tuner.
For operating KCA-BT100 (Optional)
The following control methods of the function for this unit may be different from the Instruction manual; therefore, refer to the following supplemental instruction. <Dialing by Using the Quick Dialing Function> 1. Press the Control knob. Select the display other than INITIAL. 2. Press the [ ] button. 3. Select the number to recall by turning the Control knob. 4. Press the Control knob. <Registering to the Preset Dial Number List> 1. Operation is the same. Refer to the instruction manual of KCA-BT100. 2. Press the [ ] button. 3. Select the number to memory by turning the Control knob. 4. Press the Control knob for at least 1 seconds. <Deleting a Registered Cell-Phone> Refer to <Deleting a Registered Bluetooth device> (page 38) in this instruction manual. <Menu System> For how to operate Menu, refer to <Function Control> in this instruction manual. About display Cell-Phone Status is displayed in the status display of this unit. Moreover, some displays are different from the description of KCA-BT100 Instruction Manual. Displays of KCA-BT100 Instruction Manual DISCONCT CONNECT PHN-DEL P-STATUS Actual displays on this unit HF Disconnect HF Connect Device Delete BT DVC Status
If the time set in the cell-phone is shorter than that set in the unit, the former will be used. This function does not work for call waiting.
Call Beep (Setting the Beep of the Incoming Call) You can output a beep from the speaker when a call comes in. ON : Beep is heard. OFF : Beep is canceled. CD Read Sets the method for reading CD. When unable to play special format CD, set this function to 2 to force playing. Note that some music CD may be unplayable even when set to 2. In addition, audio files cannot be played when set to 2. Normally, keep this set to 1. 1 : Automatically distinguishes between audio file disc and music CD when playing disc. 2 : Forces playing as music CD. Display If this unit is not operated at least 5 seconds with OFF selected, the display turns off. During a setup mode, the display will not turn off even if 5 seconds lapse. DISP DIM (Display illumination dimmer) Reduces the display Illumination brightness. AUTO: Dims the illumination in conjunction with the Light switch of the vehicle. MNAL1: Dims the illumination constantly. MNAL2: Dims the illumination darker than MNA1. OFF: Does not dim the illumination.
BT DVC Status (Displaying the Bluetooth device Status) You can display the connection status, signal strength, and battery level. : Battery level of cell-phone. Nearly dead Full : Signal strength of cell-phone. Maximum Minimum
SP Select (Setting up the Voice Output Speakers) You can specify the voice output speakers. FRONT : Outputs voice from the front-left and front-right speakers. F-R : Outputs voice from the front-right speaker. F-L : Outputs voice from the front-left speaker.
Icons are not displayed if information cannot be obtained from the cell-phone. Since the number of steps of the control unit is different from that of the cell-phone, the statuses displayed on the control unit may discord from those displayed on the cell-phone.
Select the speaker which is further from the microphone in order to prevent howling or echoes.
HIGHWAY-SOUND Increases the volume of faintest sound being lost by road noises to make the sound more audible. Additionally, it accentuates bass sound being lost by road noises to make the bass sound more dynamic. Illumi DIM (Key illumination dimmer) Reduces the key Illumination brightness. AUTO: Dims the illumination in conjunction with the Light switch of the vehicle. MNAL1: Dims the illumination constantly. MNAL2: Dims the illumination darker than MNA1. OFF: Does not dim the illumination. Mic Gain Adjusts the sensitivity of the built-in microphone for a telephone call. Adjust the voice of caller. Setting to + increases the voice volume. NR Level Reduces the noises generated by surrounding environment without changing the built-in microphone volume. Adjust the voice of caller when it is not clear. Setting to + increases the noise reduction. Receive Mode (Receive mode Setting) Sets the receive mode of the HD Radio. Auto: Automatically tunes to analog broadcast when there is no digital broadcast. Digital: Digital broadcasts only. Analog: Analog broadcasts only.
ZQ-640 29PT552A-78R AVH-P6000DVD Hagenuk DUO SCX-4300 ETS SEH PS Price Nikon F60D Deskjet 5550 MD-5W MHC-ZX10 BAR383HG EG1081 MW162 550 IR Psr-200 EBM-900 Security Code TH-42PV60EH Maker Backltup All-IN-ONE Aux MZ-NF810 KP-53S4 IC-4088SR Soundstream SVX2 DSI XL 2 00A SGH-U900 Soul T-4700 EFA 6840 Panel ER8315B Sensor Juiced HS030GB UX-B30 B33 MY Note RR-US320 Camileo P30 Wiring Diagram Nokia 6234 S7000 240V AR-5420 Systems Guitar DI 2010 Sagem D26T CP770 8 0 Sedan 931BF SLV-SX700D SX-820 HT-FS3 CX600 Classic Code GN 7100 741MP J132A UR5U-8520L MHC-R550 Txc 1500 DP522 DVR-16 EG8083 Meter EP709 AN8-V Software Ipod 64250 Sl-T RCM 104 DR-119E SP-P300ME DD-35 Deluxe PT-AE900E 27F520T TA-R200 SGH-ZV10 5561 SK DLC-1 LBT-XB55AV Onis 300 SF-2040 ZR200 32PW9523-58M Studio 9 Junior Coax-LAN64 5100G VPC-C6EX S5100 Wiring PRO 9500 LG KG90 KX-TG7341E SA7003 XV-HTD1 21MS76CT Sign-ON TCH-M1000R SGH-J150
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101