Reviews & Opinions
Independent and trusted. Read before buy Kenwood KDC-MP232!

Kenwood KDC-MP232

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Kenwood KDC-MP232 Car Audio, size: 665 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Kenwood KDC-MP232About Kenwood KDC-MP232
Here you can find all about Kenwood KDC-MP232 like manual and other informations. For example: code, wiring diagram.

Kenwood KDC-MP232 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Kenwood KDC-MP232 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Kenwood KDC-MP232 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 4. Page 1 of 1. Average Rating:
Alucard 11:36am on Wednesday, September 22nd, 2010 
this product is made by kenwood so that makes this product a i have never heard of kenwood making a bad product so i have
Signe 5:33pm on Sunday, August 1st, 2010 
Good unit for the price, but no equalizer This unit is great at the price, but you can only adjust the bass, treble, and midrange.
!_!b-gay-_ 5:45am on Sunday, June 27th, 2010 
Not as cool as it looks I just put one of these into my new Honda Pilot and I hesitate to give it even 1 star. First of all.
randini 4:19am on Wednesday, April 28th, 2010 
Good unit for the price, but no equalizer This unit is great at the price, but you can only adjust the bass, treble, and midrange. Almost great I just installed this in my car last week. First I must say this stereo sounds great!

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

CD-RECEIVER
KDC-MP2032 KDC-MP2032CR KDC-MP232 KDC-MP202 KDC-232MR

INSTRUCTION MANUAL

Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KDC-MP2032/MP2032CR/MP232/MP202/232MR Serial number

US Residence Only

Register Online
Register your Kenwood product at www.Kenwoodusa.com

B64-3290-10/02 (KW/K0)

Contents
Warning Safety precautions Notes About CDs About MP3 and WMA General features
Power Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Setting Switching Display Dimmer Control Theft Deterrent Faceplate TEL Mute

Menu system

Menu System Activating Security Code Deactivating Security Code Touch Sensor Tone Manual Clock Adjustment DSI (Disabled System Indicator) Supreme Setting CRSC (Clean Reception System Circuit) Receive mode Setting SIRIUS ID (ESN) display Auxiliary Input Display Setting Text Scroll CD Read Setting Demonstration mode Setting
Basic Operations of remote control 24 Accessories/ Installation Procedure 26 Connecting Wires to Terminals Installation 12 Removing the Unit Troubleshooting Guide Specifications 34

Tuner features

Tuning Tuning Mode Station Preset Memory Auto Memory Entry Preset Tuning
CD/Audio file/External disc control features 14
Playing CD & Audio file Playing External Disc Fast Forwarding and Reversing Track/File Search Disc Search/Folder Search Direct Track/File Search Direct Disc Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play Folder Select Text/Title Scroll
HD Radio control features

About HD Radio Tuning

English

2Warning

2CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. Location : Bottom Panel
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

English |

Safety precautions

2WARNING

To prevent injury or fire, take the following precautions:
To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Mounting and wiring this product requires skills and experience. For safetys sake, leave the mounting and wiring work to professionals.
About CD players/disc changers connected to this unit
Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. The functions you can use and the information that can be displayed may differ depending on the models being connected.
You can damage both your unit and the CD changer if you connect them incorrectly.
To prevent damage to the machine, take the following precautions:
Make sure to ground the unit to a negative 12V DC power supply. Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers. Do not subject the faceplate to excessive shock, as it is a piece of precision equipment. When replacing a fuse, only use a new fuse with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit.

Lens Fogging

When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condesnation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.
Do Not Load 3-in. CDs in the CD slot
If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit.
This Class B digital apparatus complies with Canadian ICES-003.
If you experience problems during installation, consult your Kenwood dealer. When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. Press the reset button if the disc auto changer fails to operate correctly. Normal operation should be restored.
Before using this unit for the first time
This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the <Demonstration mode Setting> (page 23).
About SIRIUS Satellite radio tuner
Refer to the instruction manual of SIRIUS Satellite radio tuner KTC-SR901/SR902/SR903 (optional accessory), when connected, for the operation method. KDC-MP2032/KDC-MP232/KDC-232MR Refer to the sections of A models for operations.

FM/ 4 SCRL

Reset button We recommend the use of <Activating Security Code> (page 20) to prevent theft. The characters which can be displayed by this unit are A-Z 0-9 @ " ` % & * + = ,. / \ < > [ ] ( ) : ; ^-{}|~. The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable.

DISP/C.S.

Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth.
Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty, wipe them with a clean soft dry cloth.

About CDs

Handling CDs
Do not touch the recording surface of the CD.

Removing CDs

When removing CDs from this unit pull them out horizontally.

CDs that cannot be used

CDs that are not round cannot be used.
CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. Do not stick tape etc. on the CD, or use a CD with tape stuck on it.

When using a new CD

If the CD center hole or outside rim has burrs, use the CD only after removing the burrs with a ballpoint pen, etc.
CDs with coloring on the recording surface or CDs that are dirty cannot be used. This unit can only play the CDs with. This unit may not correctly play discs which do not have the mark. You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CDR/CD-RW recorder instruction manual.)

CD storage

Do not place CDs in direct sunlight (On the seat or dashboard etc.) or where the temperature is high. Store CDs in their cases.

CD accessories

Do not use disc type accessories.

CD cleaning

Clean from the center of the disc and move outward.

About MP3 and WMA

The playable MP3/WMA file (hereafter called Audio file) and the media format has the following limitation. The Audio file, which is not comforming to the specification, may not play normally, or the file and folder names may not display correctly.
The maximum number of characters for display
File/Folder name: 64 (Joliet: 32) characters MP3 ID3 Tag/ WMA Contents property: 30 characters
File/Folder name is the number of the characters including the extensions MP3 ID3 Tag can only display the tag of Ver1.0/1.1

Playable Audio file

MP3, WMA: KDC-MP2032/KDC-MP2032CR/ KDC-MP232/KDC-MP202
Attach the correct extension for the Audio file (MP3: ".MP3", WMA: ".WMA") Do not attach the extensions to files other than the Audio file. If the extension is attached, the file, which is not the Audio file, will play and outputs a loud noise, causing damage to the speaker. The files with copy protection cannot be played. The settings of your encoding software and the environment in which it is used may now allow you to play or view specific audio files. For encoding specifications and instructions on how to set encoding software, browse through software help or check with the developers.

Limitation of structure for the file and the folder
Maximum number of directory levels: 8 Maximum number of folders: 100 Maximum number of files per folder: 255
Playing order of the Audio file
The Audio file plays in the order which is written by writing software. You may be able to set the playing order by writing the play sequence numbers such as "01" to "99" at the beginning of the file name. Example 0: Folder CD (1) : Audio file

Playable MP3 file

MPEG 1/2 Audio Layer 3 file Transfer bit rate: 8-320 kbps Sampling frequency : 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz

Playable WMA file

The file in accordance with Windows Media Audio (Except for the file for Windows Media Player 9 or after which applies the new functions) Transfer bit rate: 48-192 kbps Sampling frequency: 32, 44.1, 48 kHz

" 3

Playable media

CD-ROM, CD-R, CD-RW

CD-RW discs which are quick formatted by the writing software cannot be used. When recording to the maximum media capacity at once, the writing software is set to "Disc at once".

Playable disc format

ISO 9660 Level 1/2 Joliet Romeo Long file name.
Playing order Playing order after ! play. ", #, $, %. File search Forward file search during # play. Push the Control knob towards [] $ Folder search Forward folder search during " play. Push the Control knob towards [FM] 3, 4. Folder select When the selection is set to directory 4, and you want to skip to the folder 2 at the same level. Push the Control knob towards [4] 2 When the selection is set to directory 3, moves the level up by folder select. Push the Control knob towards [AM] 2

General features

Release button

Control knob

ATT/DIM

LOUD indicator

ATT indicator

Clock display

Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second.

Volume

Increasing Volume Turn the [VOL] knob clockwise. Decreasing Volume Turn the [VOL] knob counterclockwise.

Selecting the Source

Press the [SRC] button. Source required SIRIUS tuner* (Optional accessory) Tuner or HD Radio* (Optional accessory) CD External disc* (Optional accessory) Auxiliary input* (Optional accessory) Standby (Illumination only mode) Display "SIRIUS" "TUNER" or "HD RADIO" "CD" "CD CH" "AUX EXT" "STANDBY"

Attenuator

Turning the volume down quickly. Press the [ATT] button. Each time you press the button, the Attenuator turns ON and OFF. When the Attenuator is ON, the "ATT" indicator blinks.

System Q

Selecting the best sound setting preset for different types of music.
* Function of the KDC-MP2032/MP232/232MR The power will be turned off automatically after about 20 minutes have elapsed under the standby mode (KDC-232MR only).
1 Select the source to set

Press the [SRC] button.

| English

2 Select the Sound type

Press the [Q] button. When you press the button once, the current sound setting is displayed. Each time you press the button, the sound setting alternates. Sound setting Natural Rock Pops Easy Top 40 Jazz Display "NATURAL" "ROCK" "POPS" "EASY" "TOP40" "JAZZ"

Audio Setup

Setting the Sound system, such as Volume offset and Loudness.
1 Select the source to adjust

2 Enter Audio Setup mode

Press the [VOL] knob for at least 1 second.
3 Select the Audio Setup item to adjust
Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.
4 Adjust the Audio setup item
Change each setting value with the <Speaker Setting> (page 10). First, select the speaker type with the Speaker setting. When the value is set up by <Audio Control> (page 9), "USER" is displayed.
Turn the [VOL] knob. Adjustment Item Volume offset Loudness Display "V-OFF" "LOUD" Range ON/OFF
Audio Control 1 Select the source to adjust
2 Enter Audio Control mode

Press the [VOL] knob.

Volume offset: Sets each sources volume as a difference from the basic volume. Loudness: Compensates for low and high tones during low volume. When Loudness is ON, "LOUD" indicator is ON.

5 Exit Audio Setup mode

3 Select the Audio item to adjust

4 Adjust the Audio item

Turn the [VOL] knob. Adjustment Item Display Range Bass level "BAS L" 8 +8 Middle level "MID L" 8 +8 Treble level "TRE L" 8 +8 Balance "BAL" Left 15 Right 15 Fader "FAD" Rear 15 Front 15 Exit Audio Control mode (Volume control mode)
5 Exit Audio Control mode
Press any button. Press a button other than the [VOL] knob, [SRC], [0] and [ATT] button. English |

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting the speaker type. Track number & Play time Clock "P-TIME" "CLOCK"

In Audio file source

Information Song title & Artist name Album name & Artist name Folder name File name Track number & Play time Clock Display "TITLE"* "ALBUM"* "FOLDER" "FILE" "P-TIME" "CLOCK"

1 Enter Standby

Press the [SRC] button. Select the "STANDBY" display.

2 Enter Speaker Setting mode
3 Select the Speaker type
Turn the [VOL] knob. Each time you turn the knob, the setting alternates between the settings shown in the table below. Speaker type OFF For 5 & 4 in. speaker For 6 & 6x9 in. speaker For the OEM speaker Display "SP OFF" "SP 5/4" "SP 6*9/6" "SP OEM"

In HD Radio source

Information Station name Song title/ Artist name/ Album name/ Genre Frequency Clock Display "ST NAME"* "TITLE"* "FREQ" "CLOCK"
4 Exit Speaker Setting mode
In Standby/ Auxiliary input source
Information Source name Clock Display "SRC NAME" "CLOCK"

Switching Display

Changing the information displayed.
3 Exit Switching Display mode

Press the Control knob.

* If the contents of the information cannot be displayed, Play time or Frequency is displayed. Album name cannot be displayed in WMA file.
1 Enter Switching Display mode
Press the Control knob for at least 1 second. "DISP SEL" is displayed.
2 Select the Display item
Push the Control knob towards [4] or [].

In Tuner source

Information Frequency Clock Display "FREQ" "CLOCK"
In CD & External disc source
Information Display Disc title (In External disc source or KDC- "D-TITLE"* MP2032/MP2032CR/MP232/MP202 internal CD source) Track title (In External disc source or KDC- "T-TITLE"* MP2032/MP2032CR/MP232/MP202 internal CD source)

Dimmer Control

You can lower the brightness of the display by using the dimmer function. Press the [DIM] button for at least 1 second. Each time you press the button for 1 second, the Dimmer contol turns ON or OFF. When the Dimmer control is ON, "DIM ON" is displayed.

TEL Mute

The audio system automatically mutes when a call comes in.
When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON.
To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to <Connection Wires to Terminals> (page 27).
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you, helping to deter theft.
Removing the Faceplate Press the Release button. The faceplate unlocks, allowing you to detach it.
The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. Keep the faceplate in its faceplate case while detached. Do not expose the faceplate (and the faceplate case) to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

Reattaching the Faceplate
1 Align the projections on the unit with the
grooves on the faceplate.

Projections Grooves

2 Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit.

AUTO/ AME

ST indicator

Band display

Frequency display

Preset station number

Tuning

Selecting the station.

Tuning Mode
Choose the tuning mode. Press the [AUTO] button. Each time you press the button, the Tuning mode alternates between the modes shown in the table below. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. Preset station seek "AUTO 2" Search in order of the stations in the Preset memory. Manual "MANUAL" Normal manual tuning control.

1 Select tuner source

Press the [SRC] button. Select the "TUNER" display.

2 Select the band

Push the Control knob towards [FM] or [AM]. Each time you push the knob toward [FM], it switches between the FM1, FM2, and FM3 bands.

3 Tune up or down band

During reception of stereo stations the "ST" indicator is ON.

Station Preset Memory

Putting a station in the memory.

1 Select the band

Push the Control knob towards [FM] or [AM].
2 Select the frequency to put in the memory
3 Put the frequency in the memory
Press the desired [1] [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] [6] button.

Auto Memory Entry

Putting stations with good reception in the memory automatically.
1 Select the band for Auto Memory Entry

2 Open Auto Memory Entry

Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes.

Preset Tuning

Recalling the stations in the memory.

2 Recall the station

Press the desired [1] [6] button.
CD/Audio file/External disc control features

RDM/ 3

F.SEL M.RDM

Disc number

IN indicator

Track number

Play time
Playing CD & Audio file
When a disc is inserted Press the [SRC] button. Select the "CD" display.
When a CD is inserted, the "IN" indicator is ON.
Function of the KDC-MP2032/KDC-MP232/KDC232MR

Playing External Disc

Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display "CD CH" "MD CH" Disc player CD changer MD changer

You can continue by returning to step 2 and setting other items.

4 Exit Menu mode

Press the [MENU] button.
When other items those applicable to the basic operation method above are displayed, their setting content chart is entered. (Normally the setting listed at the top of the chart is the original setting.) Also, the explanation for items that are not applicable (<Manual Clock Adjustment> etc.) are entered step by step.

1 Enter Menu mode

Press the [MENU] button for at least 1 second. "MENU" is displayed.

2 Select the menu item

Push the Control knob towards [FM] or [AM]. Example: When you want to set the beep sound, select the "BEEP" display.

3 Set the menu item

Push the Control knob towards [4] or []. Example: When you select "BEEP", each time you push the knob it alternates between "BEEP ON" or "BEEP OFF". Select 1 of them as the setting. English |
Function of the KDC-MP2032/KDC-MP232/KDC232MR In Standby mode

Activating Security Code

Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. Indication of this Security Code activation prevents your precious audio unit from stealing.
If you enter the wrong Code in steps 4 through 6, repeat from step 4.
Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed
1 Turn the power ON. 2 Do the step 4 through 7 operation, and enter
the Security Code. "APPROVED" is displayed. Now, you can use the unit.
Set the Security Code when the <Demonstration mode Setting> (page 23) is set to OFF. You can set the Security Code with a 4 digit number of your choice. The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up.
When the Security Code function is activated, "CODE SET" changes to "CODE CLR". To deactivate the Security Code function, see the next section <Deactivating Security Code>.

2 Enter Menu mode

Press the [MENU] button for at least 1 second. When "MENU" is displayed, "CODE SET" is also displayed.

DSI (Disabled System Indicator)
A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display "DSI ON" "DSI OFF" Setting LED flashes. LED OFF.
Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF.
Function of the KDC-MP2032/KDC-MP232/KDC232MR In HD Radio mode

Receive mode Setting

Sets the receive mode.
Serial & SIRIUS ID (ESN) It is important to retain the unit serial number and the electronic SIRIUS Identification number for service activation and potential service changes.
1 Select the Receive mode
Push the Control knob towards [FM] or [AM]. Select the "HDR MODE" display.

2 Enter Receive mode

Press the Control knob for at least 1 second.
Auxiliary Input Display Setting
Selecting the display when alternating to Auxiliary input source.

3 Set the Receive mode

Push the Control knob towards [FM] or [AM]. Each time you push the knob, the Receive mode alternates between the modes shown in the table below. Receive mode Auto mode Display "AUTO" Operation Analog broadcasts and digital broadcasts will be switched automatically. When both are being transmitted, the digital broadcast will have priority. Digital broadcasts only. Analog broadcasts only.
1 Select Auxiliary input source
Press the [SRC] button. Select the "AUX EXT" display.
3 Select Auxiliary input display setting mode
Push the Control knob towards [FM] or [AM]. Select the "NAME SET" display.

Digital Analog

"DIGITAL" "ANALOG"
4 Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second. The selected Auxiliary input display is displayed.

4 Exit Receive mode

Even if the Receive mode is set to "AUTO", when the Ball game mode program (non-delayed broadcast program) is received, the Receive mode will automatically switch to Analog broadcast only.
5 Select the Auxiliary input display
Push the Control knob towards [4] or []. Each time you push the knob, the display alternates as listed below. "AUX EXT" "DVD" "PORTABLE" "GAME" "VIDEO" "TV"

Do not set the remote control in hot places such as above the dashboard.

Audio Control

[AUD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item.
Refer to <Audio Control> (page 9) for the operation method, such as the procedures for Audio control and others operations.

In SIRIUS tuner source

[FM] button Selects the preset band. [4]/ [] buttons Searches up or down channels. [0] [9] buttons Press buttons [1] [6] to recall preset channels. [DIRECT]/ [OK] button Enters and cancels the <Direct Access Tuning> mode.
Refer to the instruction manual of SIRIUS Satellite radio tuner for <Direct Access Tuning> function.
[FM]/ [AM] buttons Selects the band. Each time you press the [FM] button, the band alternates between the FM1, FM2, and FM3 bands. [4]/ [] buttons Tune up or down band. [0] [9] buttons Press buttons [1] [6] to recall preset stations.
[FM] button Selects the HD FM band. Each time you press the [FM] button, the band alternates between the HF1, HF2, and HF3 bands. [AM] button Selects the HD AM band. [4]/ [] buttons Tunes up or down bands.

In Disc source

[4]/ [] buttons Going forwards and backwards between track/ files. [+]/ [] buttons Going forwards and backwards between disc/ folders. [38] button Each time you press the button, the song pauses or plays. [0] [9] buttons When in <Direct Track/File Search> (page 15) and <Direct Disc Search> (page 15), enters the track/ file/disc number.
[0] [9] buttons Press buttons [1] [6] to recall preset stations.
Accessories/ Installation Procedure
Accessories 1..1 2..2 3..4 4..4 5..1 Installation Procedure
1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the speaker wires of the wiring harness. 4. Connect the wiring harness wires in the following order: ground, battery, ignition. 5. Connect the wiring harness connector to the unit. 6. Install the unit in your car. 7. Reconnect the - battery. 8. Press the reset button.
If the power is not turned ON (or it is ON, but will be OFF immediately), the speaker wire may have a short-circuit or touched the chasis of the vehicle and the protection function may have been activated. Therefore, the speaker wire should be checked. If your cars ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, as with battery wires, the battery may die. If the console has a lid, make sure to install the unit so that the faceplate will not hit the lid when closing and opening. If the fuse blows, first make sure the wires arent touching to cause a short circuit, then replace the old fuse with one with the same rating. Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the - wires or ground them to any metal part in the car. When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). For example, if you connect the + connector of the left speaker to a front output terminal, do not connect the - connector to a rear output terminal. After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. Mount the unit so that the mounting angle is 30 or less.

Screwing the Faceplate on the Unit
If you want to fasten the faceplate to the main unit so that it does not fall off, screw in the provided screws in the holes shown below.

Accessory5

Never insert the screw in any other screw hole than the one specified. If you screw them in another hole, it will contact and may cause damage to the mechanical parts inside the unit.

Removing the Unit

Removing the hard rubber frame 1 Engage the catch pins on the removal tool and
remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure.
Removing the Unit 1 Refer to the section <Removing the hard rubber 2 3
frame> (page 30) and then remove the hard rubber frame. Remove the screw (M4 8) on the back panel. Insert the two removal tools deeply into the slots on each side, as shown.
Screw (M4X8) (commercially available)

Lock Catch

Accessory2 Removal tool
2 When the upper level is removed, remove the

lower two locations.

4 Lower the removal tool toward the bottom, and
pull out the unit halfway while pressing towards the inside.
The frame can be removed from the bottom side in the same manner.
Be careful to avoid injury from the catch pins on the removal tool.
5 Pull the unit all the way out with your hands,
being careful not to drop it.

Troubleshooting Guide

What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems.

General

The power does not turn ON. The fuse has blown. After checking for short circuits in the wires, replace the fuse with one with the same rating. Theres a source you cant switch. Theres no media inserted. Set the media you want to listen to. If theres no media in this unit, you cant switch to each source. The Disc changer isnt connected. Connect the Disc changer. If the Disc changer isnt connected to its input terminal, You cant switch to an external disc source. The memory is erased when the ignition is turned OFF. The ignition and battery wire are incorrectly connected. Connect the wire correctly, referring to the section on <Connecting Wires to Terminals>. The TEL mute function does not work. The TEL mute wire is not connected properly. Connect the wire correctly, referring to the section on <Connecting Wires to Terminals>. The TEL mute function turns ON even though the TEL mute wire is not connected. The TEL mute wire is touching a metal part of the car. Pull the TEL mute wire away from the metal part of the car. Even if Loudness is turned ON, high-pitched tone isnt compensated for. Tuner source is selected. High-pitched tone isnt compensated for when in Tuner source.

No sound can be heard, or the volume is low. The fader or balance settings are set all the way to one side. Center the fader and balance settings. The input/output wires or wiring harness are connected incorrectly. Reconnect the input/output wires or the wiring harness correctly. See the section on <Connecting Wires to Terminals>. The values of Volume offset are low. Turn up the Volume offset, referring to the section on <Audio Setup> (page 9). The sound quality is poor or distorted. One of the speaker wires is being pinched by a screw in the car. Check the speaker wiring. The speakers are not wired correctly. Reconnect the speaker wires so that each output terminal is connected to a different speaker. The Touch Sensor Tone doesnt sound. The preout jack is being used. The Touch Sensor Tone cant be output from the preout jack.

Tuner source

Radio reception is poor. The car antenna is not extended. Pull the antenna out all the way. The antenna control wire is not connected. Connect the wire correctly, referring to the section on <Connecting Wires to Terminals>.
Disc source Audio file source
"AUX EXT" is displayed without achieving External disc control mode. Unsupported disc changer is connected. Use the disc changer mentioned in the <About CD players/disc changers connected to this unit> (page 4) of the section on <Safety precautions>. The specified disc does not play, but another one plays instead. The specified CD is quite dirty. Clean the CD. The disc is loaded in a different slot from that specified. Eject the disc magazine and check the number for the specified disc. The disc is severely scratched. Try another disc instead. A CD ejects as soon as it is loaded. The CD is quite dirty. Clean the CD, referring to the CD cleaning of the section on <About CDs> (page 6). Cant remove disc. The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF. The disc can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button. The disc wont insert. Theres already another disc inserted. Press the [0] button and remove the disc. Direct Search cant be done. Another function is ON. Turn Random Play or other functions OFF. Track Search cant be done. For the discs/folders first or last song. For each disc/folder, Track Search cant be done in the backward direction for the first song or in the forward direction for the last song.
Cannot play an Audio file. The media is scratched or dirty. Clean the media, referring to the CD cleaning of the section on <About CDs> (page 6). The sound skips when an Audio file is being played. The media is scratched or dirty. Clean the media, referring to the CD cleaning of the section on <About CDs> (page 6). The recording condition is bad. Record the media again or use another media. The Audio file track time isnt displayed correctly. -- There are times when it isnt displayed correctly according to the Audio file recording conditions. Supreme does not take effect when it is turned ON. Little high-frequency component. Supreme would not take effect with songs with little high-frequency component. Songs that have not been encoded at bit rates lower than 96 kbps (fs = 32k, 44.1 k, 48 kHz)or those that have been encoded at a variable bit rate cannot be decoded to reproduce their highfrequency components. ---

doc1

European Tuning Conversions Kenwood KTS-300MR and KTS-MP400MR With radio power on and in tuner mode. Press and hold preset buttons 1 and 5. While holding preset buttons 1 and 5, press and hold the reset button for 2-3 seconds. Release preset buttons 1and 5 along with the reset button. The radio is now converted to European tuning. Kenwood DIN style radios (KDCMP232 and KDC132) Turn radio on with SRC button. Press and hold SRC button for 3 seconds to turn radio fully off. (No Display) Hold preset buttons #1 and #5. While holding #1 and #5 down press SRC to turn radio on. Unit is now switched to/from European tuning. Note- The DIN radios will revert back to US tuning if power is removed from the unit. KEC DVD-3 DVD Region switching Unplug IR eye from back of unit. Eject CD or DVD from player. Press 0422 on remote control, this brings current region code on TV screen. Press 0 then enter on remote. Press play on remote. Unit is now region-free for DVD playback.
TriStar Distributing- 1-800-621-2278 ask for tech support if you have questions or difficulty.

 

Tags

TX-32PK2 Sbcvl1100 Friends YP-T6Z Tools SE IPF710 XPL160 Wiring Diagram GR-DZ7EK Sun Twin DDX8019 ERS-7M3 DHC-ZX50MD Abit HA66 Geometry RZ-48SZ40RB XS-L126p5 LQ-800 Reflector Expedition-2000 Polaroid I830 LN40C610n1F Software-windows Magicolor 5440 T703V 7124-E-p-gr- RX3000 ML-1710P 2350 EN Yamaha CX-1 Server Quadraverb Plus CD135 KV-XR29m50 Cruze Geforce 6800 Code Navigator AF-540FGZ Casio VZ-1 21FU6TL-l4 Esam6600 Fostex E-2 CE1031latb CLP-50 4060 BM Gericom A360 PSC805 Infiniti M45 8 9 CMT-HX30 MPU-101 JOG-2001 MV802 WM-FS420 RDC-2 Roland E-28 Lifestyle T10 NAD T765 MC-500 Dishwasher Jims-190 Phonefax 33S 802 11B Dect 215 RTT2160 Voyager 510S DS20930 F-0408A LAM400R Gz-mc200 FA970 SE1402B GR-D270 Advantage800 Vaci-5300plus GCS614A Serie SDC-812II 42620 Escort 5580 KMX50 HL-2040 HD160JJ-SCC DMC-LZ8 SU-8W Tektronix 1750 RV-9900 KX-TG1311SL Archos 10 Dista T500 Laserjet 5500 IR3180CI Camedia C750 Night BDV-E370 Mastermind ITC008-V2 C 13 Yamaha D-65 LN46C630k1F DMC-ZX3

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101