Kenwood KDC-MP632U Manual
Kenwood KDC-MP632u - Instruction Manual Car Audio, size: 2.9 MB
In-dash unit, Full-DIN, 50 Watts x 4, Stereo
Flip-Down Detachable Faceplate; Rotary Encoder and Jog Control Knob for Easy Operation; 14-Segment FL Display (8-Digit, Scroll On/Off selectable); Display Off Mode; USB Interface; ACDrive (Advanced Codec Drive); AAC/WMA/MP3 Playback; System Q/System E's; Installer/Backup Memory of Audio Setup; SIRIUS Satellite Radio Ready; HD Radio Ready; External Media Control - iPod Ready; TEL Mute; Dual Zone Source and Volume Control; AUX Input. [ Report abuse or wrong photo | Share your Kenwood KDC-MP632U photo ]
User reviews and opinions
|espo111||9:19am on Thursday, July 29th, 2010|
|DONT BUY IT!!! It was good for about a month, I got the IPOD hook up and it was terribly hard to use. The usb didnt play all the time. And now. quirky device The unit sounds great. The large display shows the album names well. |
However, the button layout is Horrible.
|Muuc||2:23am on Saturday, July 17th, 2010|
|quirky device The unit sounds great. The large display shows the album names well. However, the button layout is Horrible.|
|CHARMS||12:55am on Friday, April 2nd, 2010|
|quirky device The unit sounds great. The large display shows the album names well. However, the button layout is Horrible.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
KDC-X590 KDC-MP632U KDC-MP532U
AMPLI-TUNER LECTEUR DE CD
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KDC-X590/MP632U/MP532U Serial number
US Residence Only
Register your Kenwood product at www.kenwoodusa.com
Safety precautions Notes About CDs About AAC, MP3 and WMA About USB device General features
Power Selecting the Source Volume Attenuator System Q Audio Control Adjusting the detail of Audio Control Audio Setup Speaker Setting Subwoofer Output Switching Display Theft Deterrent Faceplate TEL Mute
Switching the Play mode Letter Seek Text/Title Scroll
HD Radio control features
About HD Radio Tuning
Menu System Activating Security Code Deactivating Security Code Touch Sensor Tone Manual Clock Adjustment DSI (Disabled System Indicator) Display Illumination Control Dimmer Switching preout Built-in Amp Setting Dual Zone System Setting B.M.S. (Bass Management System) B.M.S. Frequency Offset AMP Control CRSC (Clean Reception System Circuit) Receive mode Setting SIRIUS ID (ESN) display Auxiliary Input Display Setting Text Scroll Built-in Auxiliary input Setting CD Read Setting Voice Index Firmware version display Unique ID display Audio Preset Memory Audio Preset Recall Demonstration mode Setting
Tuning Tuning Mode Direct Access Tuning Station Preset Memory Auto Memory Entry Preset Tuning
CD/USB device/Audio file/External disc control features 19
Playing CD & Audio file Playing USB device Playing External Disc Fast Forwarding and Reversing Track/File Search Disc Search/Folder Search Direct Track/File Search Direct Disc Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play All Random Play Select mode File Select mode Folder Select 1 mode Folder Select 2 mode
Basic Operations of remote control 35 Accessories/ Installation Procedure 38 Connecting Wires to Terminals Installation Removing the Unit Troubleshooting Guide Specifications 48
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. Location : Bottom Panel
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
About "Media Manager" of PC application attached to KDC-X590/KDC-MP632U
"Media Manager" is recorded in the CD-ROM attached to this unit. Refer to the attached installation manual for the installation method of "Media Manager". Refer to the users manual recorded in the installation CD-ROM and Help of "Media Manager" for the operation method of "Media Manager". The unit can play CD/ USB device (hereafter called "ACDrive media") created by "Media Manager". Refer to the following site for the updated information of "Media Manager". http://www.kenwood.mediamanager.jp Contact Kenwood for the function and operation of the "Media Manager". "Media Manager" is a product of PhatNoise.
About SIRIUS Satellite radio tuner
Refer to the instruction manual of SIRIUS Satellite radio tuner KTC-SR901/SR902/SR903 (optional accessory), when connected, for the operation method. Refer to the sections of A models for operations.
FM/ 4 SCRL AUTO
AM SRC DISP/C.S.
About DAB Tuner control
Refer to A group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the control method of DAB Tuner function. However, the following control methods of the function for this unit may be different from the Instruction manual; therefore, refer to the following supplemental instruction. <Auto Ensemble Memory Entry> 1. Select the preset band for Auto Ensemble Memory Entry. 2. Press the [AME] button for at least 2 seconds. Open Auto Ensemble Memory Entry. After storing in the memory finishes, the number of the pre-set buttons and the ensemble label are displayed. <Searching by programme type and language> and <Languages to be displayed> in <Programme Type (PTY) Function> At the operation to press [DISP] button, use [AUTO] button instead.
Do not touch the recording surface of the CD.
When removing CDs from this unit, pull them out horizontally.
CDs that cannot be used
CDs that are not round cannot be used.
CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. Do not stick tape etc. on the CD, or use a CD with tape stuck on it.
Among the Basic Audio items, you can adjust the Bass level, Middle level, and Treble level in detail.
1 Select the Basic Audio item
Select the desired item to be set in detail from followings; Bass level Middle level Treble level For how to select Basic Audio items, see <Audio Control> (page 12).
2 Enter Detail adjustment mode of Audio
Control Press the [VOL] knob for at least 1 second.
3 Select the Detail Audio item to adjust
4 Adjust the Detail Audio item
Turn the [VOL] knob. Bass level Adjustment Item Bass Center Frequency Bass Q Factor Bass Extend Display "BAS F" "BAS Q" "B EX" Range 40/50/60/70/80/100/ 120/150 Hz 1.00/1.25/1.50/2.00 OFF/ON
Middle level Adjustment Item Display Middle Center Frequency "MID F" Middle Q Factor "MID Q" Treble level Adjustment Item Display Treble Center Frequency "TRE"
Range 0.5/1.0/1.5/2.0 kHz 1.0/2.0
Range 10.0/12.5/15.0/17.5 kHz
5 Exit the Detail Audio Control mode
Press the [VOL] knob for at least 1 second.
When you set the Bass Extend to ON, low frequency response is extended by 20%. You can exit the Audio Control mode at anytime by pressing any button except for [VOL] and [ATT] buttons.
Setting the Sound system, such as Cross over Network.
- Adjust the volume of Rear channel by <Audio Control> (page 12). - The Audio Control has no effect on sub source. You can use the Dual Zone System with the Auxiliary input sources listed below. - Internal auxiliary input (KDC-MP632U only) - Option CA-C1AX/ CA-C2AX (KDC-X590 only)
1 Select the source to adjust
2 Enter Audio Setup mode
5 Exit Audio Setup mode
3 Select the Audio Setup item to adjust
Fine-tuning so that the System Q value is optimal when setting the speaker type.
4 Setup the Audio item
Turn the [VOL] knob. Adjustment Item Display "HPF" Front High Pass Filter*1,3 Rear High Pass Filter*1,3 "HPR" Low Pass Filter*1,2,3 Subwoofer Phase* Volume offset Loudness Dual Zone System*1
"LPF" "PHAS" "V-OFF" "LOUD" "2ZON"
Range Through/40*5/60*5/80/100/ 120/150/180/220*5 Hz Through/40*5/60*5/80/100/ 120/150/180/220*5 Hz 50*5/60/80/100*5/120/ Through Hz Reverse (180)/ Normal (0) OFF/ON OFF/ON
2 Select the Display item
Push the Control knob towards  or .
3 Exit Switching Display mode
Press the Control knob.
When LX-AMP is connected, the item setup by the Display mode of LX-AMP is displayed. (KDC-X590 only) * If the contents of the information cannot be displayed, Play time or Frequency is displayed. If the contents of the information for the SIRIUS tuner source cannot be displayed, channel number is displayed. Track number at Audio file displays the last 3 digits when it exceeds 1000 songs. When you select the clock display, the display setting of each source will be changed to the clock display.
In Tuner source
Information Frequency Clock Display "FREQ" "CLOCK"
In CD & External disc source
Information Disc title Track title Track number & Play time Clock Display "D-TITLE"* "T-TITLE"* "P-TIME" "CLOCK"
In Audio file source
Information Song title & Artist name Album name & Artist name Folder name File name Track number & Play time Clock Display "TITLE"* "ALBUM"* "FOLDER" "FILE" "P-TIME" "CLOCK" English |
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you, helping to deter theft.
The audio system automatically mutes when a call comes in.
Removing the Faceplate
1 Press the Release button.
Drop open the faceplate.
When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON.
To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to <Connecting Wires to Terminals> (page 39, 40, 41).
2 Drawing the faceplate to left side pull it to
forward and remove it.
The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. Keep the faceplate in its faceplate case while detached. Do not expose the faceplate (and the faceplate case) to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
Reattaching the Faceplate
1 Align the shaft on the unit with the
depression on the faceplate.
2 Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit.
AUTO/AME Control knob
1 Enter the track/file number
You can select Direct File Search up to 999.
Repeat play Track Repeat Disc Repeat (In Disc Changer) OFF Display "TRAC REP" "DISC REP" "REP OFF"
2 Do Track/File Search
Press the  or  button.
Cancelling Direct Track/File Search Press the  button.
Repeat play File Repeat Folder Repeat OFF Display "FILE REP" "FOLD REP" "REP OFF"
Playing the first part of each song on the disc or Audio file folder you are listening to and searching for the song you want to hear.
Function of disc changer
Magazine Random Play
Play the songs on all the discs in the disc changer in random order. Press the [M.RDM] button. Each time you press the button, the Magazine Random Play turns ON or OFF. When the Magazine Random mode is ON, "MGZN RDM" is displayed.
When you push the Control knob toward , the next random song starts.
1 Start Scan Play
Press the [SCAN] button. "TRAC SCN"/"FILE SCN"/"SCAN ON" is displayed.
2 Release it when the song you want to listen
to is played Press the [SCAN] button.
Play all the songs on the disc or Audio file folder in random order. Press the [RDM] button. Each time you press the button, Random Play turns ON or OFF. When the Random mode is ON, "DISC RDM"/ "FOLD RDM"/"RDM ON" is displayed.
Function of Audio file
All Random Play
Playing randomly from all of the Audio files recorded in the media. Press the [A.RDM] button for at least 1 second. When the random mode is ON, "ALL RDM" is displayed.
Cancelling the All Random Play Press the [A.RDM] button.
Quickly selecting the file or folder you want to hear.
File Select mode
You can select an audio file in the folder currently being played by file name.
1 Select the Select mode
Press the [F.SEL] button. Display Select mode Refer to <File Select mode> (page 23). "FILE SEL"*1 "FLD SEL1"/"FLD SEL" Refer to <Folder Select 1 mode> (page 24). "FLD SEL2"*2 Refer to <Folder Select 2 mode> (page 24). Exit the Select mode
1 Enter File Select mode
Press the [F.SEL] button. Select the "FILE SEL" display. Refer to <Select mode> (page 23). File name display Displays the current file name.
The Select mode does not function when <All Random Play> (page 22) is ON. *1 You cannot operate this function when <Random Play> (page 22) is set to "ON". *2 You cannot operate this function when <Switching the Play mode> (page 25) is set to other than "FOLDER" while playing ACDrive media.
2 Select the file
Push the Control knob towards  or . Switching between files in units of 10 songs Push the Control knob towards [FM] or [AM]. With the [FM] button, you move 10 songs up and with the [AM] button, 10 songs down.
You can select File Select mode up to 999.
2 Select the file/ folder
Refer to the explanation of the procedure performed in each select mode.
Scrolling the file/ folder name display Push the Control knob toward [FM] for at least 2 seconds.
You can cancel the announcement when selecting the folder by <Voice Index> (page 33) during the play of the ACDrive media. (KDC-X590/MP632U only) In the File Select mode, the <Voice Index> (page 33) announcement is not made. (KDC-X590/MP632U only)
3 Decide the file to play
Press the Control knob. The File Select mode releases, and the Audio file being displayed plays.
Function of Audio file Function of Audio file
Folder Select 1 mode
Select the target folder by tracing the hierarchical levels of folders. This is convenient when managing audio files by folder.
Folder Select 2 mode
Select the target folder within the folders containing audio files. The folder which contains playable audio files is only displayed.
1 Enter Folder Select 1 mode
Press the [F.SEL] button. Select the "FLD SEL1"/"FLD SEL" display. Refer to <Select mode> (page 23). Folder name display Displays the current folder name.
1 Enter Folder Select 2 mode
Press the [F.SEL] button. Select the "FLD SEL2" display. Refer to <Select mode> (page 23). Folder name display Displays the current folder name.
2 Select the folder level*
Push the Control knob towards [FM] or [AM]. With the [FM] button, you move 1 level down and with the [AM] button, 1 level up. Selecting a folder in the same level Push the Control knob towards  or . With the  of the Control knob, you move to the previous folder, and with the  of the Control knob, to the next folder. Returning to the top level* Press the  button.
* You cannot operate this function when <Switching the Play mode> (page 25) is set to other than "FOLDER" while playing ACDrive media.
2 Select the folder
Push the Control knob towards  or . Each time you push the knob, the folders containing audio files are displayed one after another.
Check the name of upper level folder Push the Control knob towards [FM] or [AM]. With the [FM] button, the folder name in the upper level is displayed. With the [AM] button, the folder name in the lower level is displayed. " " is displayed while the upper level folder is displayed.
3 Decide the folder to play
Press the Control knob. The Folder Select mode releases, and the Audio file in the folder being displayed plays.
Function of the KDC-X590/KDC-MP632U Function of ACDrive media
Switching the Play mode
Arrange the playing orders of the songs by categories. Press the [S.MODE] button. Each time you press the button, the Play mode alternates between the modes shown in the table below. The Play mode indicator is ON. Play mode Category which is to be arranged "P. LIST" Play list order. "GENRE" By genre. "ARTIST" By artist. "ALBUM" By album. "FOLDER" By the folder recorded in media
You can search for the song, you want to play, by selecting the initial of Genre name, Artist name, or Album name.
1 Enter the Letter Seek mode
Press the [S.MODE] button for at least 1 second.
This operation does not function when <All Random Play> (page 22) is ON. This function is available only when the Play mode is set Genre, Artist, or Album.
Cancelling the Letter Seek Press the [S.MODE] button.
The category information of each song is the data registered in Media Manager when ACDrive media is being generated. You can cancel the announcement made when the mode is changed by <Voice Index> (page 33). You can select the advancement of the Play mode information by [AM] and [FM] knob.
2 Start the Letter Seek
Push the Control knob towards  or . The initial of Genre name, Artist name, or Album name is displayed and announced in order.
The announcement of the initial can be canceled by <Voice Index> (page 33). When you push the Control knob to the reverse  or  during Letter Seek, the initial is displayed and announced in the reversed order. Once Letter Seek starts, it cannot be cancelled.
3 Select the song to play
Press the Control knob when the initial of the song you are searching is displayed and announced. The selected initial group plays.
Scrolling the displayed CD text or MD title. Push the Control knob toward [FM] for at least 2 seconds.
When the <Display Illumination Control> (page 29) is set to OFF, the display may black out while scrolling.
Push the Control knob towards [FM] or [AM]. Select the "AMS CTRL" display.
2 Enter Receive mode
Press the Control knob for at least 1 second.
2 Enter AMP Control mode
3 Set the Receive mode
Push the Control knob towards [FM] or [AM]. Each time you push the knob, the Receive mode alternates between the modes shown in the table below. Receive mode Auto mode Display "AUTO" Operation Analog broadcasts and digital broadcasts will be switched automatically. When both are being transmitted, the digital broadcast will have priority. Digital broadcasts only. Analog broadcasts only.
3 Select the AMP Control item for adjustment
For the details on the AMP Control item, see the Instruction manual attached to the LX AMP.
4 Adjust the AMP Control item
5 Exit AMP Control mode
You cannot use the LX AMP operation during standby mode.
4 Exit Receive mode
Even if the Receive mode is set to "AUTO", when the Ball game mode program (non-delayed broadcast program) is received, the Receive mode will automatically switch to Analog broadcast only.
In FM reception
CRSC (Clean Reception System Circuit)
Temporarily have reception alternate from stereo to mono to reduce multi-path noise when listening to the FM station. Display "CRSC ON" "CRSC OFF" Setting The CRSC is ON. The CRSC is OFF.
SIRIUS ID (ESN) display
Displaying the SIRIUS ID (Electronic Serial Number). Display "ESN = ************"
Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF.
Serial & SIRIUS ID (ESN) It is important to retain the unit serial number and the electronic SIRIUS Identification number for service activation and potential service changes.
Auxiliary Input Display Setting
Selecting the display when alternating to Auxiliary input source.
Setting the displayed text scroll. Display "SCL AUTO" "SCL MANU" Setting Repeats scroll. Scrolls when the display changes.
In CD/ USB mode
Firmware version display
Displaying the firmware version with the unit.
3 Select Audio Preset mode
Push the Control knob towards [FM] or [AM]. Select the "A-PRESET" display.
1 Select the firmware version display mode
Push the Control knob towards [FM] or [AM]. Select the "ACD VER"/"F/W VER" display.
4 Enter Audio Preset mode
2 Display the firmware version
5 Select the Audio Preset Memory
Push the Control knob towards [FM] or [AM]. Select the "MEMORY" display.
6 Put the Audio Preset in the memory
Press the Control knob for at least 2 seconds. The "MEMORY" display blinks 1 time.
Function of the KDC-X590/KDC-MP632U In CD/ USB mode
7 Exit Audio Preset mode
Register 1 pair of Audio Preset Memory. You cannot register by the source. When you press the Reset, all the sources will be the setting value which is registered. The following items cannot be registered. Volume, Balance, Fader, Loudness, Volume offset, Dual Zone System, Rear Volume
Unique ID display
Displaying the serial number for each product.
1 Select the unique ID display mode
Push the Control knob towards [FM] or [AM]. Select the "ACD ID" display.
2 Display the unique ID
Function of the KDC-X590/KDC-MP632U Other than Standby mode In Standby mode
Audio Preset Recall
Recalling the sound setup registered by <Audio Preset Memory> (page 33).
Demonstration mode Setting
Sets the demonstration mode.
1 Select the Demonstration mode
Push the Control knob towards [FM] or [AM]. Select the "DEMO" display.
1 Select the source
2 Set the Demonstration mode
Press the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below. Display "DEMO ON" "DEMO OFF" Setting The Demonstration mode function is ON. Exit Demonstration mode (Normal mode).
5 Select the Audio Preset Recall
Push the Control knob towards [FM] or [AM]. Select the "RECALL" display.
6 Recall the Audio Preset
Press the Control knob for at least 2 seconds. The "RECALL" display blinks 1 time.
The User memory of <System Q> (page 12) is changed to the value which was recalled. The source tone memory item of <Audio Control> (page 12) is changed to the value which was recalled by the selected source.
Basic Operations of remote control
AUD FM/AM/+/ Not Used 2-ZONE
38 4/ DIRECT
PRS TUV WXY QZ
Loading and Replacing the battery
Use two "AA"/ "R6"-size batteries. Slide the cover while pressing downwards to remove it as illustrated. Insert the batteries with the + and poles aligned properly, following the illustration inside the case.
[VOL] buttons Adjusts the volume. [SRC] button Each time you press the button, the source alternates. For the source alternating order refer to <Selecting the Source> (page 11). [ATT] button Turns the volume down quickly. When the button is pressed again, the volume returns to the previous level.
Store unused batteries out of the reach of children. Contact a doctor immediately if the battery is accidentally swallowed.
Do not set the remote control in hot places such as on the dashboard.
[AUD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item.
Refer to <Audio Control> (page 12) for the operation method, such as the procedures for Audio control and others operations. The remote control can only select and adjust the Basic Audio item. Selecting and adjusting of the Detail Audio item cannot be done.
In Disc/USB source
/  buttons Going forwards and backwards between track/ files. [+]/  buttons Going forwards and backwards between disc/ folders.  button Each time you press the button, the song pauses or plays.   buttons When in <Direct Track/File Search> (page 21) and <Direct Disc Search> (page 21), enters the track/ file/disc number.
Dual Zone System
[2-ZONE] button Each time you press the button, "2ZON" of <Audio Setup> (page 14) is turned ON or OFF. /  buttons Adjusts the volume of the rear channel. The rear channel activates while the Dual Zone System is ON.
[FM] button Selects the preset band. /  buttons Searches up or down channels.   buttons Press buttons   to recall preset channels. [DIRECT] button Enters and cancels the <Direct Access Tuning> mode.
[FM]/ [AM] buttons Selects the band. Each time you press the [FM] button, the band alternates between the FM1, FM2, and FM3 bands. /  buttons Tune up or down band.   buttons Press buttons   to recall preset stations. [DIRECT] button Enters and cancels the <Direct Access Tuning> (page 18) mode.
[FM] button Selects the HD FM band. Each time you press the [FM] button, the band alternates between the HF1, HF2, and HF3 bands. [AM] button Selects the HD AM band. /  buttons Tunes up or down bands.   buttons Press buttons   to recall preset stations.
If no connections are made, do not let the wire come out from the tab. When using the optional power amplifier, connect to its power control terminal. Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. Connect to the terminal that is grounded when either the telephone rings or during conversation. To connect the Kenwood navigation system, consult your navigation manual. To car light control switch Power control wire (Blue/White)
White/Black To front left speaker White Gray/Black To front right speaker Gray Green/Black To rear left speaker Green Purple/Black To rear right speaker Purple
REAR R REAR L FRONT R FRONT L
Connecting Wires to Terminals (KDC-MP532U)
USB connector To USB device Rear left output (White) Rear right output (Red) Do not remove the cap when you do not use the USB cable. The connector will cause the unit to malfunction if it gets in touch with any metallic part of the vehicle. Fasten the connector with the tape so that the cable will not come off. Front right output (Red)
Front left output (White)
FM/AM antenna input
To connect these leads, refer to the relevant instruction manuals.
To Kenwood disc changer/ External optional accessory Fuse (10A) If no connections are made, do not let the wire come out from the tab. When using the optional power amplifier, connect to its power control terminal. Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. Connect to the terminal that is grounded when either the telephone rings or during conversation. To connect the Kenwood navigation system, consult your navigation manual. To car light control switch Power control wire (Blue/White)
Wiring harness (Accessory1)
Metal mounting strap (commercially available) Firewall or metal support
Japanese cars 1 Refer to the section <Removing the hard rubber 2
frame> (page 44) and then remove the hard rubber frame. Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws. T N
Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
N T T/N
T: Toyota cars N: Nissan cars
Self-tapping screw (commercially available) Screw (M4X8) (commercially available)
8 mm MAX.
Accessory3.for Nissan car Accessory4.for Toyota car
Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
No sound can be heard, or the volume is low. The fader or balance settings are set all the way to one side. Center the fader and balance settings. The input/output wires or wiring harness are connected incorrectly. Reconnect the input/output wires or the wiring harness correctly. See the section on <Connecting Wires to Terminals> (page 39, 40, 41). The values of Volume offset are low. Turn up the Volume offset, referring to the section on <Audio Setup> (page 14). The <Built-in Amp Setting> (page 30) is OFF. Turn it ON. The sound quality is poor or distorted. One of the speaker wires is being pinched by a screw in the car. Check the speaker wiring. The speakers are not wired correctly. Reconnect the speaker wires so that each output terminal is connected to a different speaker. The Touch Sensor Tone doesnt sound. The preout jack is being used. The Touch Sensor Tone cant be output from the preout jack. The Dimmer function doesnt work. The Dimmer wire isnt connected correctly. Check the Dimmer wire connection. The <Dimmer> (page 29) is OFF. Turn it ON. The display blacks out while scrolling. <Display Illumination Control> is set to OFF. Refer to <Display Illumination Control> (page 29). The sound is not output from Subwoofer or it outputs the different sound. When "2 ZONE" of <Audio Setup> is set to ON. Set "2 ZONE" of <Audio Setup> to OFF (page14). Cannot set Dual Zone System of <Audio Setup> (page 14). CA-C1AX/ CA-C2AX is connected to KCA-S210A or other units. Connect the CA-C1AX/ CA-C2AX directly to this unit.
Tuner source Audio file source
Radio reception is poor. The car antenna is not extended. Pull the antenna out all the way. The antenna control wire is not connected. Connect the wire correctly, referring to the section on <Connecting Wires to Terminals> (page 39, 40, 41). The desired frequency cant be entered with the Direct Access Tuning. A station that cant be received is being entered. Enter a station that can be received. Youre trying to enter a frequency with a 0.01 MHz unit. What can be designated in the FM band is to 0.1 MHz.
Cannot play an Audio file. The media is scratched or dirty. Clean the media, referring to the CD cleaning of the section on <About CDs> (page 7). The sound skips when an Audio file is being played. The media is scratched or dirty. Clean the media, referring to the CD cleaning of the section on <About CDs> (page 7). The recording condition is bad. Record the media again or use another media. The Audio file track time isnt displayed correctly. -- There are times when it isnt displayed correctly according to the Audio file recording conditions.
"AUX EXT" is displayed without achieving External disc control mode. Unsupported disc changer is connected. Use the disc changer mentioned in the <About CD players/disc changers connected to this unit> (page 4) of the section on <Safety precautions>. The specified disc does not play, but another one plays instead. The specified CD is quite dirty. Clean the CD. The disc is loaded in a different slot from that specified. Eject the disc magazine and check the number for the specified disc. The disc is severely scratched. Try another disc instead. Cant remove disc. The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF. The disc can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button. The disc wont insert. Theres already another disc inserted. Press the  button and remove the disc. Direct Search cant be done. Another function is ON. Turn Random Play or other functions OFF. Track Search cant be done. For the discs/folders first or last song. For each disc/folder, Track Search cant be done in the backward direction for the first song or in the forward direction for the last song.
HD Radio source
No sound can be heard, or the volume is low. The preset broadcast station is not transmitting in the mode that was set with <Receive mode Setting>. Please set <Receive mode Setting> (page 31) to "AUTO". In digital AM broadcasting, receive mode switches between stereo and monaural too often. Receiving condition is bad or unstable. Stereo is chosen when receiving condition is good, and it switches to monaural when the condition becomes bad. HD Radio tuner is connected to KCA-S210A or other units. Connect the HD Radio tuner directly to the control unit.
USB device source
The USB device is not detected. The USB connector is disconnected. Connect the connector of the USB device properly. The USB device does not play its audio files. The USB connector is disconnected. Connect the connector of the USB device properly.
The messages shown below display your systems condition.
SIR-KEN1 SiriusConnect Tuner for Kenwood Headunit Compatibility Chart
The SIR-KEN1 is compatible with the following Kenwood models:
DDX6017 DDX6019 DDX7015 DDX7017 DDX8017 DPX301 DPX501U DPX701 EZ-500 KCA-R70FM KCA-R71FM KDC-2025 KDC-225 KDC-225MR KDC-232MR KDC-3022 KDC-3025 KDC-3028 KDC-322 KDC-325 KDC-328 KDC-4022
KDC-422 KDC-722 KDC-MP2028 KDC-MP2032 KDC-MP222 KDC-MP225 KDC-MP228 KDC-MP232 KDC-MP332 KDC-MP4028 KDC-MP4032 KDC-MP425 KDC-MP428 KDC-MP5028 KDC-MP5032 KDC-MP522 KDC-MP528 KDC-MP532U KDC-MP6025 KDC-MP625 KDC-MP628 KDC-MP632U
KDC-MP7028 KDC-MP728 KDC-MP732 KDC-MP822 KDC-MP825 KDC-MP828 KDC-MP832U KDC-MP922 KDC-MP925 KDC-MP928 KDC-MPV5025 KDC-MPV525 KDC-MPV6022 KDC-MPV622 KDC-MPV8025 KDC-V7022 KDC-X469 KDC-X569 KDC-X579 KDC-X589 KDC-X590 KDC-X679
KDC-X769 KDC-X789 KDC-X790 KDC-X869 KDC-X879 KDC-X889 KDCX890 KDC-X969 KDC-X979 KDC-X990 KOS-A200 KOS-V1000 KTS-300MR KTS-MP400MR KVT-715DVD KVT-717DVD KVT-815DVD KVT-817DVD KVT-915DVD KVT-M707 XXV-01D XXV-05V
|Product Type||Radio / CD / MP3 player / digital player|
|Form Factor||Full-DIN - in-dash unit|
|Sound Output Mode||Stereo|
|Max Output Power / Channel Qty||50 Watts x 4|
|Additional Features||Telephone mute, flip-down console, dual volume control, satellite radio tuner control, ID3 tags support, dual-zone capability, HD radio ready, iPod ready|
|Type||Radio tuner - AM/FM|
|Tuning Display||Fluorescent display|
|Type||CD / MP3 player|
|Supported Digital Audio Standards||WMA, AAC, MP3|
|Digital Player (Recorder)|
|Device Type||Digital player|
|Supported Digital Audio Standards||WMA, AAC, MP3|
|Connector Type||USB 1 x audio line-in ( RCA phono x 2 ) 2 x audio line-out ( RCA phono x 2 )|
|Universal Product Identifiers|
Review Doctor 750 Brochure LS090CP SIP-300 MCD288-12 Tubepre Nikon F Maestro 4050 KD-G162 SRU1018-10 32LX2D FX-850P Firewall 6 Nokia N80I DB415 WAA20162SN MPX 4000 223XL Zanussi T613 TH-42PV700P DVP5980K - MAP VPL-ES3 JBL L65 KX-FC238FX - 2000 Pnts 30-4 SGH-I620 Dell D530 PV-L550D FAX-B320 Arc 2500 DVP-NS330 Alarm Nokia E63 CD-RW4u USB DX-C370 TW200-2005 RD3000 TA-R200 SPV E200 Generation KD-S721R Lrsc26911TT Diamond KDL-26B4050 TS-850 AVR-4800 SU-V620 LQ-570E DCR-TRV250E Citroen C1 Hssk40-50 SDM-M81 B Amarys 210 FX-9860GII SD PLV-Z800 MD255 RTI A5 Xyron 2500 NN-5556 PSC 1315 DV-S77 PC-1360 UE-22C4000PW 301SI Gpsmap60CS CLX-8380 XR-C7220R A1800 CT MO 23 Chorus 212 Elura 100 Flash MX DVD728-001 TT 6244 RDR-HX680 SK3000 Flashmeter VI SCX-4828FN 8802 DPF DJ-X7E XR06CX LG V161 Linux 5 55PP9527 BMW M5 RAS24CH2 Asus VW19 TA-FA777ES AC104 CSD-P1 DPF-0561 30132 EW1289W Mc233 RB-1090 KX-FC225G Europa 200 AV-D55
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101