CD-RECEIVER

KDC-W4534 KDC-W4034A/G/AY/GY KDC-W434A/G/GY KDC-W410A/G/AY/GY KDC-W40G KDC-3034A/G

INSTRUCTION MANUAL

B64-3294-00/00 (EW/EN/E2W/E2N)

Contents

Safety precautions Notes About MP3 and WMA About CDs General features
Power Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Setting Switching Display Dimmer Control Theft Deterrent Faceplate TEL Mute

Menu system

Menu System Security Code Touch Sensor Tone Manual Clock Adjustment Synchronize Clock DSI (Disabled System Indicator) Selectable Illumination Supreme Setting News Bulletin with Timeout Setting Local Seek Tuning Mode AF (Alternative Frequency) Restricting RDS Region (Region Restrict Function) Auto TP Seek Monaural Reception Auxiliary Input Display Setting Text Scroll Power OFF Timer CD Read Setting Demonstration mode Setting

Tuner features

Tuning Tuning Mode Station Preset Memory Auto Memory Entry Preset Tuning
Accessories/ Installation Procedure Connecting Wires to Terminals Installation 14 Removing the Unit Troubleshooting Guide Specifications

RDS features

Traffic Information Radio Text Scroll PTY (Program Type) Program Type preset Changing Language for PTY Function
CD/Audio file/External disc control features 17
Playing CD & Audio file Playing External Disc Fast Forwarding and Reversing Track/File Search Disc Search/Folder Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play Folder Select Text/Title Scroll

English

Safety precautions

2WARNING

To prevent injury or fire, take the following precautions:
To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Mounting and wiring this product requires skills and experience. For safetys sake, leave the mounting and wiring work to professionals.
About CD players/disc changers connected to this unit
Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. The functions you can use and the information that can be displayed may differ depending on the models being connected.
You can damage both your unit and the CD changer if you connect them incorrectly.

2CAUTION

To prevent damage to the machine, take the following precautions:
Make sure to ground the unit to a negative 12V DC power supply. Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers. Do not subject the faceplate to excessive shock, as it is a piece of precision equipment. When replacing a fuse, only use a new fuse with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit.

Lens Fogging

When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condesnation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.
Do Not Load 8 cm (3 in.) CDs in the CD slot
If you try to load a 8 cm (3 in.) CD with its adapter into the unit, the adapter might separate from the CD and damage the unit.

English |

If you experience problems during installation, consult your Kenwood dealer. When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. Press the reset button if the disc auto changer fails to operate correctly. Normal operation should be restored.
Before using this unit for the first time
This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the <Demonstration mode Setting> (page 25).
About DAB Tuner control (KDC-W4534)
Reset button The characters which can be displayed by this unit are A-Z 0-9 @ " ` % & * + = ,. / \ < > [ ] ( ) : ; ^-{}|~. The RDS feature wont work where the service is not supported by any broadcasting station. The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable.
Refer to A group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the control method of DAB Tuner function. However, the following control methods of the function for this unit may be differed from the Instruction manual; therefore, refer to the following supplemental instruction. <Auto Ensemble Memory Entry> 1. Select the preset band for Auto Ensemble Memory Entry. 2. Press the [AME] button for at least 2 seconds. Open Auto Ensemble Memory Entry. After storing in the memory finishes, the number of the pre-set buttons and the ensemble label are displayed. <Searching by programme type and language> and <Languages to be displayed> in <Programme Type (PTY) Function> At the operation to press [DISP] button, use [TI] button instead.

2 Enter Speaker Setting mode

"T-TITLE"*

3 Select the Speaker type
Turn the [VOL] knob. Each time you turn the knob, the setting alternates between the settings shown in the table below. Speaker type OFF For 5 & 4 in. speaker For 6 & 6x9 in. speaker For the OEM speaker Display "SP OFF" "SP 5/4" "SP 6*9/6" "SP OEM"
"P-TIME" "CLOCK"

In Audio file source

Information Song title & Artist name Album name & Artist name Folder name File name Track number & Play time Clock Display "TITLE"* "ALBUM"* "FOLDER" "FILE" "P-TIME" "CLOCK"
4 Exit Speaker Setting mode
In Standby/ Auxiliary input source

Switching Display

Changing the information displayed.
Information Source name Clock
Display "SRC NAME" "CLOCK"
1 Enter Switching Display mode
Press the Control knob for at least 1 second. "DISP SEL" is displayed.
3 Exit Switching Display mode

Press the Control knob.

* If the contents of the information cannot be displayed, Play time is displayed. Album name cannot be displayed in WMA file.
2 Select the Display item
Push the Control knob towards [4] or [].
In Tuner source (KDC-W434A/W434G/ W434GY/W40G)
Information Frequency Clock Display "FREQ" "CLOCK"

In Tuner source

Information Program Service name or Frequency (FM) Radio text, Program Service name or Frequency (FM) (KDC-W4534 only) Frequency (MW, LW) Clock Display "FREQ/PS" "R-TEXT" "FREQ" "CLOCK"

Dimmer Control

You can lower the brightness of the display by using the dimmer function. Press the [DIM] button for at least 1 second. Each time you press the button for 1 second, the Dimmer contol turns ON or OFF. When the Dimmer control is ON, "DIM ON" is displayed.

TEL Mute

The audio system automatically mutes when a call comes in.
When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON.
To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to <Connection Wires to Terminals> (page 27).
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you, helping to deter theft.
Removing the Faceplate Press the Release button. The faceplate unlocks, allowing you to detach it.

The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. Keep the faceplate in its faceplate case while detached. Do not expose the faceplate (and the faceplate case) to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
Reattaching the Faceplate
1 Align the projections on the unit with the
grooves on the faceplate.

Projections Grooves

2 Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit.

AUTO/ AME

ST indicator

Band display

Frequency display

Preset station number

Tuning

Selecting the station.

Function of the KDC-W434A/G/KDC-W40G/KDCW434GY

Tuning Mode

Choose the tuning mode. Press the [AUTO] button. Each time you press the button, the Tuning mode alternates between the modes shown in the table below. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. Preset station seek "AUTO 2" Search in order of the stations in the Preset memory. Manual "MANUAL" Normal manual tuning control.

1 Select tuner source

Press the [SRC] button. Select the "TUNER" display.

2 Select the band

Push the Control knob towards [FM] or [AM]. Each time you push the knob toward [FM], it switches between the FM1, FM2, and FM3 bands.

3 Tune up or down band

During reception of stereo stations the "ST" indicator is ON.

Station Preset Memory

Putting a station in the memory.

1 Select the band

Push the Control knob towards [FM] or [AM].
2 Select the frequency to put in the memory
3 Put the frequency in the memory
Press the desired [1] [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] [6] button.

Auto Memory Entry

Putting stations with good reception in the memory automatically.
1 Select the band for Auto Memory Entry

2 Open Auto Memory Entry

Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes.
When the <AF (Alternative Frequency)> (page 23) is ON, only RDS stations are put in the memory. When Auto Memory Entry is done in the FM2 band, the RDS stations preset in the FM1 band are not put in the memory. Likewise, when Auto Memory Entry is done in the FM3 band, RDS stations preset in FM1 or FM2 are not put in the memory.

Preset Tuning

Recalling the stations in the memory.

2 Recall the station

Press the desired [1] [6] button. English |
Function of the KDC-W4534/KDC-W4034A/AY/G/GY/KDC-3034A/G/KDC-W410A/AY/G/GY

PTY indicator

TI indicator

Traffic Information

Changing to traffic information automatically when a traffic bulletin starts even when you are not listening to the radio. Press the [TI] button. Each time you press the button, the Traffic information function turns ON and OFF. When traffic information is ON, "TI" indicator is ON. When a traffic information station is not being received the "TI" indicator blinks. When a traffic bulletin starts, "TRAFFIC" is displayed and the audio changes to traffic information.
During reception of an AM station when the Traffic Information function is turned ON, the frequency changes to an FM station. During reception of traffic information the adjusted volume is automatically remembered, and the next time the audio changes to traffic information, the volume automatically becomes the remembered volume.
Receiving other traffic information stations Push the Control knob towards [4] or [].
Traffic information can be switched when it is on the Tuner Source. However, you cannot switch the Traffic information during reception of the Traffic bulletin switched from the source other than the Tuner.
Function of the KDC-W4534

Radio Text Scroll

Scrolling the displayed radio text. Hold down on [FM] of the Control knob for at least 2 seconds.

PTY (Program Type)

Selecting the Program Type and searching for a station.
Speech and Music include the Program type shown below. Music: No.12 17, Speech: No.3 11, 18 25, 31 You can put the Program Type in the [1] [6] button memory and for quick recall. Refer to the <Program Type preset> (page 15). You can change the display language. Refer to <Changing Language for PTY Function> (page 16).

1 Enter PTY mode

Press the Control knob. During PTY mode the "PTY" indicator is ON.
This function cannot be used during a traffic bulletin or AM reception.
2 Select the Program Type
Push the Control knob towards [FM] or [AM]. Each time you push the knob, the Program Type alternates between the program types shown in the table below. No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. Program Type Speech Music News Current Affairs Information Sport Education Drama Culture Science Varied Pop Music Rock Music Easy Listening Music Light Classical Serious Classical Other Music Weather Finance Childrens programs Social Affairs Religion Phone In Travel Leisure Jazz Music Country Music National Music Oldies Music Folk Music Documentary Display "SPEECH" "MUSIC" "NEWS" "AFFAIRS" "INFO" "SPORT" "EDUCATE" "DRAMA" "CULTURE" "SCIENCE" "VARIED" "POP M" "ROCK M" "EASY M" "LIGHT M" "CLASSICS" "OTHER M" "WEATHER" "FINANCE" "CHILDREN" "SOCIAL" "RELIGION" "PHONE IN" "TRAVEL" "LEISURE" "JAZZ" "COUNTRY" "NATION M" "OLDIES" "FOLK M" "DOCUMENT"

3 Search for the selected Program Type
station Push the Control knob towards [4] or []. When you want to search for other stations, push [4] or [] of the Control knob again.
When the selected Program Type is not found, "NO PTY" is displayed. Select another Program Type.

4 Exit PTY mode

Program Type preset
Putting the Program Type in the Preset button memory and quick recall.
Presetting the Program Type
1 Select the Program Type to preset
Refer to <PTY (Program Type)> (page 15).
2 Preset the Program Type
Press the desired [1] [6] button for at least 2 seconds.
Recalling the preset Program Type
2 Recall the Program Type
Press the desired [1] [6] button.
Changing Language for PTY Function
Selecting the Program Type display language.
2 Enter Changing Language mode

Press the [TI] button.

3 Select the language
Push the Control knob towards [FM] or [AM]. Each time you push the knob, the language alternates between the languages shown in the table below. Language English French German Display "ENGLISH" "FRENCH" "GERMAN"
4 Exit Changing Language mode
CD/Audio file/External disc control features

RDM/ 3

F.SEL M.RDM

Disc number

IN indicator

Track number

Play time
Playing CD & Audio file
When a disc is inserted Press the [SRC] button. Select the "CD" display.
When a CD is inserted, the "IN" indicator is ON.

Playing External Disc

Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display "CD CH" "MD CH" Disc player CD changer MD changer
Pause and play Press the Control knob. Each time you press the knob, the audio pauses or plays. Eject the CD Press the [0] button.

When you push the Control knob toward [], the next random song starts.
Function of the KDC-W4534 Function of disc changer
3 Decide the folder to play
Press the Control knob. The Folder Select mode releases, and the Audio file in the folder being displayed plays.

Magazine Random Play

Play the songs on all the discs in the disc changer in random order. Press the [M.RDM] button. Each time you press the button, the Magazine Random Play turns ON or OFF. When the Magazine Random mode is ON, "MGZN RDM" is displayed.
Cancelling the Folder Select mode Press the [F.SEL] button.
Function of the KDC-W4534/KDC-W4034A/AY/G/ GY/KDC-W434A/G/KDC-W410A/AY/G/GY/KDCW40G/KDC-W434GY

Text/Title Scroll

Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob toward [FM] for at least 2 seconds.
Function of the KDC-W4534/KDC-W4034A/AY/G/ GY/KDC-W434A/G/KDC-W410A/AY/G/GY/KDCW40G/KDC-W434GY Function of Audio file

Folder Select

Quickly selecting the folder you want to hear.
1 Enter Folder Select mode
Press the [F.SEL] button. "FOLD SEL" is displayed. During Select mode the folder information is displayed as shown below. Folder name display Displays the current folder name.
2 Select the folder level
Push the Control knob towards [FM] or [AM]. With the [FM] of the Control knob, you move 1 level down and with the [AM] of the Control knob, 1 level up. Selecting a folder in the same level Push the Control knob towards [4] or []. With the [4] of the Control knob, you move to the previous folder, and with the [] of the Control knob, to the next folder. Returning to the top level Press the [3] button. English |

RDS indicator

Menu display

Menu System

Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation.
You can continue by returning to step 2 and setting other items.

4 Exit Menu mode

Press the [MENU] button.
When other items those applicable to the basic operation method above are displayed, their setting content chart is entered. (Normally the setting listed at the top of the chart is the original setting.) Also, the explanation for items that are not applicable (<Manual Clock Adjustment> etc.) are entered step by step.

1 Enter Menu mode

Press the [MENU] button for at least 1 second. "MENU" is displayed.

2 Select the menu item

Push the Control knob towards [FM] or [AM]. Example: When you want to set the beep sound, select the "BEEP" display.

3 Set the menu item

Push the Control knob towards [4] or []. Example: When you select "BEEP", each time you push the knob it alternates between "BEEP ON" or "BEEP OFF". Select 1 of them as the setting.

Function of the KDC-W4534 In Standby mode

Security Code

Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. Indication of this Security Code activation prevents your precious audio unit from stealing.
If you enter a Code different from your Security Code, you have to start over from step 4.
Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed
1 Turn the power ON. 2 Do the step 4 through 7 step operation, and
reenter the security code. "APPROVED" is displayed. Now, you can use the unit.
If an incorrect code is entered, "WAITING" is displayed, and the input prohibition periods shown in the table below is generated. After the input prohibition time lapses, "CODE" is displayed, and you can reenter the code.
Set the Security Code when the <Demonstration mode Setting> (page 25) is set to OFF. When you activate the Security Code function, it cannot be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package.

2 Enter Menu mode

Press the [MENU] button for at least 1 second. When "MENU" is displayed, "CODE SET" is displayed.
3 Enter Security Code mode
Press the Control knob for at least 2 seconds. When "ENTER" is displayed, "CODE" is also displayed.
Number of times the incorrect code was input 3 4
Input prohibited time 5 minutes 1 hour 24 hours

In Standby mode

4 Select the digits to enter

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Beep canceled.
5 Select the Security Code numbers
6 Repeat steps 4 and 5, and complete the

Security Code.

7 Confirm the Security Code
Press the Control knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is also displayed.
8 Do the step 4 through 7 step operation, and
reenter the security code. "APPROVED" is displayed. The Security Code function activates.

In Standby mode Function of the KDC-W4534

Manual Clock Adjustment

You can do this adjustment when the <Synchronize Clock> (page 22) is set as OFF.

Selectable Illumination

Selecting the button illumination color as green or red. Display "KEY RED" "KEY GRN" Setting The illumination color is red. The illumination color is green.
1 Select Clock Adjustment mode
Push the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display.
2 Enter Clock Adjust mode
Press the Control knob for at least 1 second. The clock display blinks.

3 Adjust the hours

Push the Control knob towards [FM] or [AM]. Adjust the minutes Push the Control knob towards [4] or [].
Function of the KDC-W4534/KDC-W4034A/AY/G/ GY/KDC-W434A/G/KDC-W410A/AY/G/GY/KDCW40G/KDC-W434GY In CD mode

Supreme Setting

When MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs=32k, 44.1k, 48kHz)) are played, this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate. Processing is optimized for the compression format used (MP3, or WMA), and adjustment is made for the bit rate used. Display "SPRM ON" "SPRM OFF" Setting Plays sound using the Supreme function. Plays the original sound stored in the audio file.
4 Exit Clock adjustment mode
Function of the KDC-W4534/KDC-W4034A/AY/G/ GY/KDC-3034A/G/KDC-W410A/AY/G/GY In Standby mode

Synchronize Clock

Synchronizing the RDS station time data and this units clock. Display "SYNC ON" "SYNC OFF" Setting Synchronizes the time. Adjust the time manually.
The sound effect may be imperceptible depending on the relationship between the audio file format and setting.
It takes 3 to 4 minutes to synchronize the clock.
Function of the KDC-W4534/KDC-W4034A/AY/G/ GY/KDC-3034A/G/KDC-W410A/AY/G/GY
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display "DSI ON" "DSI OFF" Setting LED flashes. LED OFF.
News Bulletin with Timeout Setting
The tuner automatically changes when a news bulletin starts even if the radio is not being listened to. Also, you can set the time interval when interruption is prohibited. Display and Setting "NEWS OFF" "NEWS 00M" "NEWS 90M" When you set "NEWS 00M" "NEWS 90M", the News Bulletin Interrupt function is ON. When the news bulletin starts, "NEWS" is displayed, and the tuner changes to the news bulletin.

If you choose the "20MIN" setting, further news bulletins will not be received for 20 minutes once the first news bulletin is received. The news bulletin volume is the same level that was set for <Traffic Information> (page 14). This news bulletin function is only available if the desired station sends PTY-code for news bulletin or belongs to <Enhanced Other Network>-Network sending PTY-code for news bulletin. When the News Bulletin Interrupt function is ON, the tuner changes to an FM station.
Function of the KDC-W4534/KDC-W4034A/AY/G/ GY/KDC-3034A/G/KDC-W410A/AY/G/GY In Tuner mode
Sets the tuning mode. Tuning mode Auto seek Preset station seek Manual Display "AUTO 1" "AUTO 2" "MANUAL" Operation Automatic search for a station. Search in order of the stations in the Preset memory. Normal manual tuning control.
AF (Alternative Frequency)
When the reception is poor, automatically alternate to another frequency broadcasting the same program in the same RDS network with better reception. Display "AF ON" "AF OFF" Setting The AF function is ON. The AF function is OFF.
When the AF function is ON, the "RDS" indicator is ON.
When no other stations with stronger reception are available for the same program in the RDS network, you may hear the incoming broadcast in bits and snatches. Turn OFF the AF function in such a case.

In Tuner mode

Local Seek
Only stations whose reception is good are searched in auto seek tuning. Display "LO.S OFF" "LO.S ON" Setting The local seek function is OFF. The local seek function is ON.
Restricting RDS Region (Region Restrict Function)
You can choose whether or not to restrict the RDS channels, received with the AF function for a particular network, to a specific region. Display "REG ON" "REG OFF" Setting The Region Restrict Function is ON. The Region Restrict Function is OFF.
If AF function is not restricted to the specified region and network, the AF function sets up to search the station with good reception in the same RDS network.

Each time you push the knob, the display alternates as listed below. "AUX EXT" "DVD" "PORTABLE" "GAME" "VIDEO" "TV"

Auto TP Seek

When the TI function is ON and the reception is poor while listening to a traffic information station, another traffic information station with better reception will be searched for automatically. Display "ATPS ON" "ATPS OFF" Setting The Auto TP Seek Function is ON. The Auto TP Seek Function is OFF.
6 Exit Auxiliary input display setting mode
When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes.

In FM reception

Monaural Reception
You can reduce the noise when stereo broadcasts are received as monaural. Display "MONO OFF" "MONO ON" Setting The monaural reception is OFF. The monaural reception is ON.

Text Scroll

Setting the displayed text scroll. Display "SCL MANU" "SCL AUTO" Setting Doesnt scroll. Scrolls when the display changes.
Auxiliary Input Display Setting
Selecting the display when alternating to Auxiliary input source.
The text scrolled is listed below. - CD text - Folder name/ File name/ Song title/ Artist name/ Album name - MD title - Radio text
1 Select Auxiliary input source
Press the [SRC] button. Select the "AUX EXT" display.
3 Select Auxiliary input display setting mode
Push the Control knob towards [FM] or [AM]. Select the "NAME SET" display.
4 Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second. The selected Auxiliary input display is displayed.
5 Select the Auxiliary input display

Power OFF Timer

Setting the timer to turn this units power OFF automatically when Standby mode continues. Using this setting can save the vehicles battery power. Display "OFF " "OFF 20M" (Original setting) "OFF 40M" "OFF 60M" Setting Power OFF Timer function is OFF. Turns the power OFF after 20 minutes. Turns the power OFF after 40 minutes. Turns the power OFF after 60 minutes.

Yellow Blue/White Red Black
Battery Power Control Ignition (ACC) Earth (Ground) Connection
Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black
Rear Right (+) Rear Right () Front Right (+) Front Right () Front Left (+) Front Left () Rear Left (+) Rear Left ()
1 (Default setting) The A-7 pin (red) of the vehicles ISO connector is linked with the ignition, and the A-4 pin (yellow) is connected to the constant power supply.
Ignition cable (Red) Unit Battery cable (Yellow) A-7 Pin (Red) Vehicle A-4 Pin (Yellow)
2 The A-7 pin (red) of the vehicles ISO connector is connected to the constant power supply, and the A-4 pin (yellow) is linked to the ignition.
3 The A-4 pin (yellow) of the vehicles ISO connector is not connected to anything, while the A-7 pin (red) is connected to the constant power supply (or both the A-7 (red) and A-4 (yellow) pins are connected to the constant power supply).
When the connection is made as in 3 above, the units power will not be linked to the ignition key. For that reason, always make sure to turn off the units power when the ignition is turned off. To link the units power to the ignition, connect the ignition cable (ACC.red) to a power source that can be turned on and off with the ignition key.

Installation

Metal mounting strap (commercially available) Firewall or metal support
Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw (commercially available) Screw (M4X8) (commercially available)
Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).

Removing the Unit

Removing the hard rubber frame 1 Engage the catch pins on the removal tool and
remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure.
Removing the Unit 1 Refer to the section <Removing the hard rubber 2 3
frame> (page 30) and then remove the hard rubber frame. Remove the screw (M4 8) on the back panel. Insert the two removal tools deeply into the slots on each side, as shown.
Screw (M4X8) (commercially available)

Lock Catch

Accessory2 Removal tool
2 When the upper level is removed, remove the

lower two locations.

4 Lower the removal tool toward the bottom, and
pull out the unit halfway while pressing towards the inside.
The frame can be removed from the bottom side in the same manner.
Be careful to avoid injury from the catch pins on the removal tool.
5 Pull the unit all the way out with your hands,

being careful not to drop it.

Troubleshooting Guide

What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems.
Even if Loudness is turned ON, high-pitched tone isnt compensated for. Tuner source is selected. High-pitched tone isnt compensated for when in Tuner source. No sound can be heard, or the volume is low. The fader or balance settings are set all the way to one side. Center the fader and balance settings. The input/output wires or wiring harness are connected incorrectly. Reconnect the input/output wires or the wiring harness correctly. See the section on <Connecting Wires to Terminals>. The values of Volume offset are low. Turn up the Volume offset, referring to the section on <Audio Setup> (page 9). The sound quality is poor or distorted. One of the speaker wires is being pinched by a screw in the car. Check the speaker wiring. The speakers are not wired correctly. Reconnect the speaker wires so that each output terminal is connected to a different speaker. The Touch Sensor Tone doesnt sound. The preout jack is being used. The Touch Sensor Tone cant be output from the preout jack. Even though Synchronize Clock is ON, the clock cant be adjusted. The received RDS station isnt sending time data. Receive another RDS station.

General

The power does not turn ON. The fuse has blown. After checking for short circuits in the wires, replace the fuse with one with the same rating. Theres a source you cant switch. Theres no media inserted. Set the media you want to listen to. If theres no media in this unit, you cant switch to each source. The Disc changer isnt connected. Connect the Disc changer. If the Disc changer isnt connected to its input terminal, You cant switch to an external disc source. The memory is erased when the ignition is turned OFF. The ignition and battery wire are incorrectly connected. Connect the wire correctly, referring to the section on <Connecting Wires to Terminals>. The TEL mute function does not work. The TEL mute wire is not connected properly. Connect the wire correctly, referring to the section on <Connecting Wires to Terminals>. The TEL mute function turns ON even though the TEL mute wire is not connected. The TEL mute wire is touching a metal part of the car. Pull the TEL mute wire away from the metal part of the car.