Reviews & Opinions
Independent and trusted. Read before buy Kenwood KDC-W4644U!

Kenwood KDC-W4644U

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Kenwood KDC-W4644u Car Audio, size: 466 KB
Related manuals
Kenwood KDC-W4644u Kac-x1R
Kenwood KDC-W4644uy Kac-x1R
Kenwood KDC-W4644uy Brochure
Kenwood KDC-W4644u Brochure

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Kenwood KDC-W4644UAbout Kenwood KDC-W4644U
Here you can find all about Kenwood KDC-W4644U like manual and other informations. For example: review.

Kenwood KDC-W4644U manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Kenwood KDC-W4644U please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Kenwood KDC-W4644U photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
nicdain 10:37am on Friday, August 20th, 2010 
Great Car Audio Ive Owned other Kenwood stereos & this 1 is as good as all the others. Good Car Stereo for the Price I bought this car stereo specifically because of the price and because it had an aux input. I also like red. Worth the price paid I got this guy for $70.00 and well, it does most of what I want it to do.
Phentermine 90 Tablets 37 2:46pm on Wednesday, July 21st, 2010 
Unit sounds great. This unit performs far better than one would expect for the price. Nice Features, Easy To Install

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Handling CDs

Do not touch the recording surface of the CD. Do not stick tape etc. on the CD, or use a CD with tape stuck on it. Do not use disc type accessories. Clean from the center of the disc and move outward. When removing CDs from this unit, pull them out horizontally. If the CD center hole or outside rim has burrs, use the CD only after removing the burrs with a ballpoint pen etc.

Reset button

Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth.
Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters.

CDs that cannot be used

CDs that are not round cannot be used.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty, wipe them with a clean soft dry cloth. CDs with coloring on the recording surface or CDs that are dirty cannot be used. This unit can only play the CDs with

Lens Fogging

When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.
. This unit may not correctly play discs which do not have the mark. You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CDRW recorder instruction manual.)

English |

Basic Operation
[SRC] Release [FM+] [AM] Disc slot [ ] USB Terminal

Search

[DISP] [AUD]

[1] [2] [3] [4] [5] [6]

Auxiliary input

General functions

Power/Source Select button: [SRC] Turns on the power. When the power is on, the source switches between Tuner (TUNER) , USB or iPod*1 (USB or iPod), CD (CD) , Auxiliary input (AUX), and Standby (STANDBY) each time this button is pressed. Press at least 1 second to turn off the power.

Faceplate release: Release Releases the faceplate lock so that it can be removed. Refer to the following diagram when reattaching the faceplate.
When an optional accessory is connected, the source name for each device appears. When connection of the iPod is recognized, the source display changes from USB to iPod. *1 Function of KDC-W4544U/ W4644U.
The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. Keep the faceplate in its faceplate case while detached. Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers.
Volume control: [AUD] knob Turn the knob to adjust the volume. Subwoofer output: [AM] Switches between ON (SW ON) and OFF (SW OFF) each time this button is pressed for at least 2 seconds.
You can do this function when SWPRE in <Menu System> (page 6) is set to SW.
Switching display: [DISP] Changing the information displayed. Refer to page 7 for the details of the display setting. Text/Title scroll: [DISP] Scrolls the CD, audio file, and Radio text display when pressed for at least 1 second. Muting volume upon reception of phone call When there is a call, CALL is displayed and the audio system is paused. When the call ends, CALL disappears and the audio system comes back on. The audio system comes back on when [SRC] is pressed during a call.
Auxiliary input Connect a portable audio device with mini-plug cable (3.5 ).
Use the mini-plug cable which is stereo type and does not have any resistance. The auxiliary input requires the setting made in AUX of <Menu system> (page 6).
To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone accessory. Refer to <Connecting Wires to Terminals> (page 21).
USB device/iPod*1 play: USB Terminal Connecting a USB device starts playback.

Tuner functions

FM band: [FM+] Switches between FM1, FM2, and FM3 each time the [FM+] button is pressed. AM band: [AM] Switches to AM. Tuning: [4]/ [] Changes the frequency.
For the playable audio file, media, and devices, refer to <About Audio file> (page 17). *1 Function of KDC-W4544U/ W4644U.
Pause and play: [6] Switches between pause and play each time this button is pressed. USB device removing: [0] Press this button for 2 seconds or longer to select the remove mode, and the remove the USB device. During the remove mode, REMOVE is displayed. Music search: [4]/ [] Changes the music when this button is pressed. Fast reverses or forwards the music while pressing. (No sound is output while playing audio file.) Folder search: [FM+]/ [AM] Changes the folder containing the audio file. Search mode: Search After pressing this button, you can quickly search songs with the [AUD] knob. See <Music Search> (page 10) for details. Track/ File/ Folder repeat play: [4] Switches between Track Repeat (TRAC REP) and OFF (REP OFF) when pressed while playing a CD. Switches between File Repeat (FILE REP), Folder Repeat (FOLD REP), and OFF (REP OFF) when pressed while playing an audio file.

Condition Page 14 10

0.5%*/ 1%/ 5%/ 10% OFF/ ON* OFF*/ ON OFF/ ON1/ ON2* R*/ SW OFF/ ON* OFF*/ OFF*/ ON

18 18

AUTO1/ AUTO2/ AUTO1*/ AUTO2/ MANUAL MANUAL 2 sec. Memorizes six stations with good reception automatically. A-MEMORY When station reception is poor, automatically switches to the station AF OFF/ ON* REG ATPS MONO NAME SET RUS*2 SCL AUX OFF CD READ DEMO OFF/ ON* OFF/ ON* OFF*/ ON
that is broadcasting the same program over the same RDS network. Sets whether to switch to the station only in the specific region using the AF control. When traffic information station reception is poor, automatically searches for a station that can be received better. You can reduce the noise when stereo broadcasts are received as monaural. 1 sec. Sets the display when switched to AUX source. Selects Russian as the display language. When set to Auto, scrolls the screen once with the change of the displayed text. Sets whether to display AUX during source selection. Turns off the power when the preset time has lapsed in the Standby mode. Sets the CD read mode. 2 sec. Specifies whether to enable demonstration.
OFF/ ON* AUTO/ MANU* OFF/ ON1*/ ON2 -----/ 20M*/ 40M/ 60M 1*/ 2 OFF/ ON*

Clock/ Display Settings

*Factory setting *1 Function of KDC-W4544U/ W4644U *2 Function of Russian sales model.
Manual Clock Adjustment 1 Select the Clock display

Press the [DISP] button.

Displayed item is depending on currently selected source or mode. The mark in Condition column shows the condition to which the item is displayed.
: Can be set in other than standby state. : Can be set in standby state. : Can be set while Audio file source of CD/USB (excluding iPod). : Can be set only during playback of the iPod source. (USB source used when the iPod is connected) : Can be set during Tuner source. : Can be set during FM reception. : Can be set while accessing AUX source. : Can be set during all sources.
2 Enter Clock adjustment mode
Press the [DISP] button for at least 1 second. The clock display blinks.

3 Adjusting Clock

Operation type Adjust the hours Adjust the minutes Operation Press the [FM+] or [AM] button. Press the [4] or [] button.

4 Exit Clock adjustment mode
Refer to the respective page for information on how to set the items with reference page number. Only the items available to the current source are displayed.
You can do this adjustment when SYNC in <Menu system> (page 6) is set to OFF.

1 Enter menu mode

Press the Search button for at least 1 second. MENU is displayed.

Text Display Selection

Changes displayed information on each source following;

2 Select the menu item

Press the [FM+] or [AM] button.

3 Set the menu item

Press the [4] or [] button.

4 Exit menu mode

Press the Search button.
In Tuner source Information Program Service name (FM) Radio text (FM) Frequency (MW, LW) Clock In CD & External disc source Information Disc title Track title Play time & Track number Clock In Audio file source Information Music title & Artist name Album name & Artist name Folder name File name Play time & Music number Clock
Display FREQ/PS R-TEXT FREQ CLOCK
Display D-TITLE T-TITLE P-TIME CLOCK
Display TITLE ALBUM FOLDER FILE P-TIME CLOCK

Next page 3 English | 7

In Standby/ Auxiliary input source Information Display Source name SRC NAME Clock CLOCK
Select the text Press the [DISP] button.
When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes. The Auxiliary input display can be set only when the built-in auxiliary input or the auxiliary input of optional KCA-S220A is used. On the KCA-S220A, AUX EXT is displayed by default.
When you select the clock display, the display setting of each source will be changed to the clock display. If the selected display item does not have any information, alternative information is displayed. When selecting Folder Name while playing with iPod, names will be displayed depending on currently selected browsing items. If the iPod Control by Hand Mode is set to on while playing the iPod, iPodMODE is displayed. If all characters cannot be displayed while playing with iPod, the file number in the list is displayed.
Information Music title Folder name File name
Display TITLE*** FLD*** FILE***
Auxiliary Input Display Setting
Selecting the display when changing to Auxiliary input source.
1 Select Auxiliary input source
Press the [SRC] button. Select the AUX display.

2 Enter Menu mode

3 Select Auxiliary input display setting mode
Press the [FM+] or [AM] button. Select the NAME SET display.
4 Enter Auxiliary input display setting mode
Press the [AUD] knob for at least 1 second. The presently selected Auxiliary input display is displayed.

5 Select the Auxiliary input display
Press the [4] or [] button. AUX/ DVD/ PORTABLE/ GAME/ VIDEO/ TV
6 Exit Auxiliary input display setting mode

Audio Control

You can adjust following Audio Control items; Adjustment Item Display Subwoofer level SW L Bass Boost B.BOOST/ B.B System Q Range 15 +15 1/2/OFF (The indicator turns on according to the setting.) Natural/Rock/Pops/Easy/ Top 40/Jazz/Game/User setting

Audio Setup

You can set Sound system, such as follows; Adjustment Item Display Low Pass Filter LPF Volume offset V-OFF Range 80/120/160/Through(OFF) Hz (AUX: 8 +8)
NATURAL/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ GAME/ USER Bass level* BAS L 8 +8 Middle level* MID L 8 +8 Treble level* TRE L 8 +8 Balance BAL Left 15 Right 15 Fader FAD Rear 15 Front 15 Exit Audio Control mode (Volume control mode)
* Source tone memory: Puts the set up value in the memory per source.
Volume offset: Sets each sources volume as a difference from the basic volume.
1 Select the source to adjust

Press the [SRC] button.

2 Enter Audio Setup mode
Press the [AUD] knob for at least 1 second.
3 Select the Audio Setup item to adjust

Press the [AUD] knob.

4 Adjust the Audio setup item

Turn the [AUD] knob.

USER: This appears when Bass level, Middle level, and Treble level are adjusted. When USER is selected, these levels are recalled.

5 Exit Audio Setup mode

2 Enter Audio Control mode

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; Speaker type OFF For 5 & 4 in. speaker For 6 & 6x9 in. speaker For the OEM speaker Display SP OFF SP 5/4 SP 6*9/6 SP OEM
3 Select the Audio item to adjust

4 Adjust the Audio item

5 Exit Audio Control mode
Press any button. Press a button other than the [AUD] knob.

1 Enter Standby

Press the [SRC] button. Select the STANDBY display.
2 Enter Speaker Setting mode
3 Select the Speaker type
4 Exit Speaker Setting mode
Function of Audio file/ Internal CD source

Music Search

Selecting the music you want to listen to from the device or media being played now.
Function of KDC-W4544U/ W4644U Function of iPod

Music Search for iPod

Search for the song (in iPod) you want to play.
1 Enter Music Search mode
Press the Search button. SEARCH is displayed. Displays the current Audio file name.

Press the Search button. SEARCH is displayed.

2 Search for music

Operation type Movement between items Skip Search *1 Selection of item Return to previous item Return to Top menu Search by initial Operation Turn the [AUD] knob. Press the [4] or [] button. Press the [AUD] knob. Press the [FM+] button. Press the [FM+] button for at least 1 second. Press the Search button for at least 1 second.

Audio file

Operation type Movement between folders/files Selection of folder/flie Return to previous folder Return to root folder Operation Turn the [AUD] knob, or press the [FM+]/ [AM] button. Press the [AUD] knob or [] button. Press the [4] button. Press the [4] button for at least 1 second.
(ON) : Indicates that a folder exists above the currently selected folder. (OFF) : Indicates that no folder exists above the currently selected folder. (ON) : Indicates that a folder exists under the currently selected folder. (OFF) : Indicates that the currently displayed folder is not followed by a folder or file. (Blinking) : Indicates that your selection is a file.
The position of the currently displayed item is indicated by the icon bar in eight steps.
Cancelling the Music Search mode Press the Search button. Searching for Music by Initial You can select an alphabetic character from the list in the browse item (artist, album, etc.) selected now.

Internal CD source

Operation type Operation Movement between track Turn the [AUD] knob, or press the [FM+]/ [AM] button. Selection of folder/flie Press the [AUD] knob. Return to first track Press the [4] button for at least 1 second.
1 Enter alphabet search mode
Press the Search button for at least 1 second. A B C is displayed.
If you can not search for a song by an alphabetic character in the browse item selected now, the data on the screen does not change.
2 Select the initial to be searched for
Operation type Move to the next character. Move to the next row. Cancelling the alphabet search mode Operation Turn the [AUD] knob, or press the [4]/ [] button. Press the [FM+] or [AM] button. Press the Search button.
Cancelling the Music Search mode Press the Search button.
Music Search cannot be performed during Random play or scan play.
3 Determine the selected initial
Press the [AUD] knob. Start search. When search is completed, the music search mode is selected again at the selected character position.
*1 Skip Search: The number of songs to be skipped is determined by the ratio of the total number of songs
in the list which is selected now. Set the ratio with SKIP in <Menu System> (page 6). Keep pressing this button for 3 seconds or longer skips songs at 10% irrespective of the setting. The time of search by alphabet may become long depending on the number of songs in iPod or the folder structure. When selecting an initial in the alphabet search mode, entering * searches symbols and entering 1 searches digits. If the first character string begins with an article a, an, or the in the alphabet search mode, it is searched for in defiance of the article. Characters that are included in a song name but cannot be displayed are left blank. If no character included in a song name cannot be displayed, the browse item name and digits are displayed.

iPod Control by Hand Mode
Allows you to operate iPod with the control on the iPod. Press the [1] button. Pressing the button toggles the setting between iPod control by hand mode on (HANDS ON) and off (MODE OFF).
In the iPod Control by hand mode, iPod cannot be operated using this unit. This mode is not compatible with music information display. The display will show iPodMODE. The following iPods cannot be controlled using this unit. iPod nano (1st generation), and iPod with video. iPod can be operated when it conforms to the iPod control function.
Items Playlists Artists Albums Music title or file name
Display PLIST*** ART*** ALB*** PRGM***
Items Podcast Genre Composer
Display PDCT*** GEN*** COM***
Accessory of KDC-W4644U Function of remote control Function of KDC-W4544U/ W4644U Function of iPod

Direct Music Search

Searchs the music by entering the track number.

All Random

All songs in iPod are played at random. Press the [3] button for at least 3 seconds. Pressing the button toggles the setting between All random play on (ALL RDM) and off (RDM OFF).

1 Enter the music number

Press the number buttons on the remote control.

2 Search the music

The time required to turn on the all random function may become longer depending on the number of songs in iPod or the folder structure. Turning on the all random function changes the iPod browse item to songs. This browse item will not change even if the all random function is turned off. If the browse item is changed to search for music while the all random function is on, the all random function is turned off and the songs in the browse item are played at random.
Cancelling Direct Music Search Press the [38] button.
Direct Music Search cannot be performed during playing of iPod, Random play, or scan play.
Accessory of KDC-W4644U Function of KDC-W4544U/ W4644U Function of disc changers with remote control

Direct Disc Search

Searchs the disc by entering the disc number.

1 Enter the disc number

2 Search the disc

Cancelling Direct Disc Search Press the [38] button.
Direct Disc Search cannot be performed during playing of Random play or scan play. Input 0 to select disc 10.
Function of KDC-W4544U/ W4644U
Basic Operation of Disc Changer (Optional)
Selecting CD changer source Press the [SRC] button. Select the CD CH display. Music search Press the [4] or [] button. Disc Search Press the [FM+] or [AM] button. Playing the Current Song or Disc Repeatedly (Repeat play) Press the [4] button. Pressing the button repeatedly selects Track Repeat play on (TRAC REP), Disc Repeat play on (DISC REP), and Repeat play off (REP OFF) sequentially. Randomly plays the music in the disc changer (Magazine random play) Press the [5] button. Pressing the button toggles the setting between Magazine random play on (MGZN RDM) and off (RDM OFF).

Auto memory entry

Putting stations with good reception in the memory automatically.
3 Search for the selected Program Type station

4 Exit PTY mode

1 Enter Menu mode
This function cannot be used during a traffic bulletin or AM reception. When the selected Program Type is not found, NO PTY is displayed. Select another Program Type.
2 Select the Auto memory mode
Press the [FM+] or [AM] button. Select the A-MEMORY display.

3 Open Auto Memory Entry

Press the [AUD] knob for at least 2 seconds. When 6 stations that can be received are put in the memory, auto memory entry closes.

Program Type preset

Putting the Program Type in the Preset button memory and quick recall.
When AF in <Menu System> (page 6) is ON, only RDS stations are put in the memory.
Presetting the Program Type
1 Select the Program Type to preset
Refer to <PTY (Program Type)> (page 13).

PTY (Program Type)

Selecting the Program Type below and searching for a station; Program Type Speech Music News Current Affairs Information Sport Education Drama Culture Science Varied Pop Music Rock Music Easy Listening Music Light Classical Display SPEECH MUSIC NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M EASY M LIGHT M Program Type Serious Classical Other Music Weather Finance Childrens programs Social Affairs Religion Phone In Travel Leisure Jazz Music Country Music National Music Oldies Music Folk Music Documentary Display CLASSICS OTHER M WEATHER FINANCE CHILDREN SOCIAL RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT
2 Preset the Program Type
Press the desired [1] [6] button for at least 2 seconds.

Recalling the preset Program Type

1 Enter PTY mode

2 Recall the Program Type
Press the desired [1] [6] button.
Changing Language for PTY Function
Selecting the Program Type display language as follows; Language English French German Display ENGLISH FRENCH GERMAN
Speech and Music include the Program type shown below. Music: Black character item. Speech: White character item.
2 Enter Changing Language mode
Press the Search button. During PTY mode the PTY indicator is ON.

3 Select the language

4 Exit Changing Language mode
2 Select the Program Type

Activating Security Code

When Security Code is set, possibility of theft is reduced because input of Security Code is prompted to turn on the unit once it is turned off.
Entering Security Code The Security Code is required to use the audio unit when the unit is first used after removed from the battery power source or the Reset button is pressed.
You can set the Security Code with a 4 digit number of your choice. The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up.
1 Turn the power ON. 2 Do the step 5 through 6 operation, and enter
the Security Code. APPROVED is displayed. Now, you can use the unit.

1 Select Standby

Deactivating Security Code
To deactivate the Security Code function.
3 Select Security Code mode
Press the [FM+] or [AM] button. Select the CODE SET display.
4 Enter Security Code mode
Press the [AUD] knob for at least 1 second. When ENTER is displayed, CODE is also displayed.
Press the [FM+] or [AM] button. Select the CODE CLR display.

5 Enter Security Code

Operation type Select the digits to enter Select the Security Code numbers Operation Press the [4] or [] button. Press the [FM+] or [AM] button.
Press the [AUD] knob for at least 1 second. When ENTER is displayed, CODE CLR is also displayed.
6 Confirm the Security Code
Press the [AUD] knob for at least 3 seconds. When RE-ENTER is displayed, CODE is also displayed.
7 Do the step 5 through 6 operation, and reenter
the Security Code. APPROVED is displayed. The Security Code function activates.
6 Press the [AUD] knob for at least 3 seconds.
CLEAR is displayed. The Security Code function deactivates.
If you enter the wrong Code in steps 5 through 6, repeat from step 5. When the Security Code function is activated, CODE SET changes to CODE CLR. To deactivate the Security Code function, see the next section <Deactivating Security Code>.
7 Exit Security Code mode
If a wrong security code is entered, ERROR is displayed. Enter a correct security code.
8 Exit Security Code mode
Demonstration mode setting
Setting the demonstration mode as follows; Display DEMO ON DEMO OFF Setting The Demonstration mode function is ON. Exit Demonstration mode (Normal mode).

AF (Alternative Frequency) When the reception is poor, automatically alternate to another frequency broadcasting the same program in the same RDS network with better reception.
RUS (Russian language setting) When this is set to ON, the following character strings are displayed in Russian: Folder name/ File name/ Song title/ Artist name/ Album name/ KCA-BT200/BT100 (optional accessory)
This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State.
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead.
AUX When this is set to ON, AUX source can be selected. ON1: Outputs the sound of external unit connected to the AUX terminal when switched to AUX source. ON2: Activates the attenuator function when switched to AUX source. Turn off the attenuator function when listening to output from external unit. This prevents the noise when no external unit is connected to AUX terminal. OFF: Disables the selection of AUX source. Set to OFF when not using the AUX terminal. OFF (Power OFF Timer) Setting the timer to turn this units power OFF automatically when Standby mode continues. Using this setting can save the vehicles battery power. : Power OFF Timer function is OFF. 20min: Turns the power OFF after 20 minutes. (Factory setting) 40min: Turns the power OFF after 40 minutes. 60min: Turns the power OFF after 60 minutes. CD READ Sets the method for reading CD. When unable to play special format CD, set this function to 2 to force playing. Note that some music CD may be unplayable even when set to 2. In addition, audio files cannot be played when set to 2. Normally, keep this set to 1. 1 : Automatically distinguishes between audio file disc and music CD when playing disc. 2 : Forces playing as music CD.
The marking of products using lasers (Except for some areas)

CLASS 1 LASER PRODUCT

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.
Declaration of Conformity with regard to the EMC Directive 2004/108/EC

Manufacturer:

Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan

EU Representatives:

Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
Accessories/ Installation Procedure

Accessories

with the ignition, connect the ignition wire to a power source that can be turned on and off with the ignition key. Use a commercially available conversion connector if the connector does not fit in the vehicle connector. Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. If the console has a lid, make sure to install the unit so that the faceplate will not hit the lid when closing and opening. If the fuse blows, first make sure the wires arent touching to cause a short circuit, then replace the old fuse with one with the same rating. Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the - wires or ground them to any metal part in the car. After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. Mount the unit so that the mounting angle is 30 or less.
2..2 Installation Procedure
1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the wire on the wiring harness. 4. Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. 5. Take Connector A on the wiring harness and connect it to the external power connector on your vehicle. 6. Connect the wiring harness connector to the unit. 7. Install the unit in your car. 8. Reconnect the - terminal of the battery. 9. Press the reset button.
About CD players/disc changers connected to this unit
If the CD player/ disc changer has the O-N switch, set it to the N position. The functions you can use and the information that can be displayed may differ depending on the models being connected.

General

The Touch Sensor Tone does not sound. The preout jack is being used. The Touch Sensor Tone cannot be output from the preout jack.

Tuner source

Radio reception is poor. The car antenna is not extended. Pull the antenna out all the way.

Disc source

The specified disc does not play, but another one plays instead. The specified CD is quite dirty. Clean the CD, referring to the CD cleaning of the section on <Handling CDs> (page 3). The disc is loaded in a different slot from that specified. Eject the disc magazine and check the number for the specified disc. The disc is severely scratched. Try another disc instead.

Audio file source

The sound skips when an Audio file is being played. The media is scratched or dirty. Clean the media, referring to the CD cleaning of the section on <Handling CDs> (page 3). The recording condition is bad. Record the media again or use another media.
The messages shown below display your systems condition.
TOC ERR: No disc has been loaded in the disc magazine. The CD is quite dirty. The CD is upsidedown. The CD is scratched a lot. The disc is unreadable. The unit is malfunctioning for some reason. Press the reset button on the unit. If the E-77 code does not disappear, consult your nearest service center. Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. Check the disc magazine. And then press the reset button on the unit. If the E-99 code does not disappear, consult your nearest service center. The CD player section is not operating properly. Reinsert the CD. If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center.

NA DVICE:

An unsupported USB device is connected. Connection to the iPod has failed. Check that the connected iPod is an iPod that is supported. See <About Audio file> (page 17) for information on supported iPods. The connected USB device contains no playable audio file. Media was played that does not have data recorded that the unit can play.

NO MUSIC/E-15:

E-05: E-77:

USB ERR:

Some trouble may have occurred to the connected USB device. Remove the USB device, then cycle the power switch to ON. If the same display is repeated, use another USB device. Connection to the iPod has failed. Remove the USB device and then reconnect it. Confirm that the software for the iPod is the latest version.

iPod ERR:

IN (Blink):
REMOVE (Blink): The Remove mode has been selected for the USB device/iPod. You can remove the USB device/iPod safely.
PROTECT (Blink): The speaker wire has a short-circuit or touches the chassis of the vehicle, and then the protection function is activated. Wire or insulate the speaker cable properly and press the reset button. If the PROTECT code does not disappear, consult your nearest service center. NA FILE: COPY PRO: READ ERR: An Audio file is played with a format that this unit cant support. A copy-protected file is played. The file system of the connected USB device is broken. Copy the files and folders for the USB device again. If the error message is still displayed, initialize the USB device or use other USB devices. The USB device is selected as a source although no USB device is connected. Change the source to any source other than USB. Connect an USB device, and change the source to USB again.

NO DVICE:

Specifications

FM tuner section

Frequency range (50 kHz space) : 87.5 MHz 108.0 MHz Usable sensitivity (S/N = 26dB) : 0.7 V/75 Quieting Sensitivity (S/N = 46dB) : 1.6 V/75 Frequency response (3.0 dB) : 30 Hz 15 kHz Signal to Noise ratio (MONO) : 65 dB Selectivity (DIN) (400 kHz) : 80 dB Stereo separation (1 kHz) : 35 dB

USB Interface

USB Standard : USB1.1/ 2.0 (Full speed) Maximum Supply current : 500 mA File System : FAT16/ 32 MP3 decode : Compliant with MPEG-1/2 Audio Layer-3 WMA decode : Compliant with Windows Media Audio AAC decode : AAC-LC.m4a files

Audio section

Maximum output power : 50 W x 4 Output power (DIN 45324, +B=14.4V) : 22 W x 4 Speaker Impedance :48 Tone action Bass : 100 Hz 8 dB Middle : 1 kHz 8 dB Treble : 10 kHz 8 dB Preout level / Load (CD) : 2000 mV/10 k Preout impedance : 600

doc1

PHONES (044) 360-7-130 (050) 336-0-130 (063) 788-0-130 (067) 233-0-130 (068) 282-0-130
Internet store of autogoods
ICQ 294-0-130 597-0-130 SKYPE km-130
CAR RECEIVERS Receivers Media receivers and stations Native receivers CD/DVD changers FM-modulators/USB adapters Flash memory Facia plates and adapters Antennas Accessories | CAR AUDIO Car audio speakers Amplifiers Subwoofers Processors Crossovers Headphones Accessories | TRIP COMPUTERS Universal computers Model computers Accessories | GPS NAVIGATORS Portable GPS Built-in GPS GPS modules GPS trackers Antennas for GPS navigators Accessories | VIDEO DVR TV sets and monitors Car TV tuners Cameras Videomodules Transcoders Car TV antennas Accessories | SECURITY SYSTEMS Car alarms Bike alarms Mechanical blockers Immobilizers Sensors Accessories | OPTIC AND LIGHT Xenon Bixenon Lamps LED Stroboscopes Optic and Headlights Washers Light, rain sensors Accessories | PARKTRONICS AND MIRRORS Rear parktronics Front parktronics Combined parktronics Rear-view mirrors Accessories | HEATING AND COOLING Seat heaters Mirrors heaters Screen-wipers heaters Engine heaters Auto-refrigerators Air conditioning units Accessories | TUNING Vibro-isolation Noise-isolation Tint films Accessories | ACCESSORIES Radar-detectors Handsfree, Bluetooth Windowlifters Compressors Beeps, loudspeakers Measuring instruments Cleaners Carsits Miscellaneous | MOUNTING Installation kits Upholstery Grilles Tubes Cable and wire Tools Miscellaneous | POWER Batteries Converters Start-charging equipment Capacitors Accessories | MARINE AUDIO AND ELECTRONICS Marine receivers Marine audio speakers Marine subwoofers Marine amplifiers Accessories | CAR CARE PRODUCTS Additives Washer fluid Care accessories Car polish Flavors Adhesives and sealants | LIQUID AND OIL Motor oil Transmission oil Brake fluid Antifreeze Technical lubricant
In store "130" you can find and buy almost all necessary goods for your auto in Kyiv and other cities, delivery by ground and postal services. Our experienced consultants will provide you with exhaustive information and help you to chose the very particular thing. We are waiting for you at the address

http://130.com.ua

KDC-W4544U KDC-W4644U KDC-W4044U KDC-W413U
CD-RECEIVER AMPLI-TUNER LECTEUR DE CD CD-RECEIVER
ua. MODE DEMPLOI om.c BEDIENUNGSANLEITUNG GEBRUIKSAANWIJZING

INSTRUCTION MANUAL

CD RECEIVER

B64-4440-00/00 (EW/E0)

Autogood products internet store http://130.com.ua

Contents

Before use Basic Operation
General functions Tuner functions Disc & Audio file play functions

Appendix

Accessories/ Installation Procedure 20 Connecting Wires to Terminals Installation/Removing the Unit 24 26
Menu System Clock/ Display Settings
Manual Clock Adjustment Text Display Selection Auxiliary Input Display Setting
Troubleshooting Guide Specifications

Audio Adjustments

Audio Control Audio Setup Speaker Setting
Music disc/Audio file Operation
Music Search Music Search for iPod All Random iPod Control by Hand Mode Direct Music Search Direct Disc Search Basic Operation of Disc Changer (Optional)

Tuner Operation

Auto memory entry PTY (Program Type) Program Type preset Changing Language for PTY Function

Other Functions

Activating Security Code Deactivating Security Code Demonstration mode setting
Basic Operations of remote control 16
The AAC logo is a trademark of Dolby Laboratories. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
KDC-W4544U/ KDC-W4644U/ KDC-W4044U/ KDC-W413U Autogood products internet store http://130.com.ua

Before use

2WARNING To prevent injury or fire, take the following precautions:
To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. If you experience problems during installation, consult your Kenwood dealer. When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. The characters which can be displayed by this unit are A-Z 0-9 @ ` % & * + = ,. / \ < > [ ] ( ) : ; ^ - { } | ~. The RDS feature wont work where the service is not supported by any broadcasting station. The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable.

Before using this unit for the first time
This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the <Demonstration mode setting> (page 15).

How to reset your unit

If this unit or the connected unit (disc auto changer, etc.) fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.

Handling CDs

Reset button

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth.
Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters.
Do not touch the recording surface of the CD. Do not stick tape etc. on the CD, or use a CD with tape stuck on it. Do not use disc type accessories. Clean from the center of the disc and move outward. When removing CDs from this unit, pull them out horizontally. If the CD center hole or outside rim has burrs, use the CD only after removing the burrs with a ballpoint pen etc.

CDs that cannot be used

CDs that are not round cannot be used.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty, wipe them with a clean soft dry cloth. CDs with coloring on the recording surface or CDs that are dirty cannot be used. This unit can only play the CDs with

Lens Fogging

When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.
. This unit may not correctly play discs which do not have the mark. You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CDRW recorder instruction manual.)
English | Autogood products internet store http://130.com.ua

Basic Operation

[SRC] Release [FM+] [AM] Disc slot [ ] USB Terminal

Search

[DISP] [AUD]

[1] [2] [3] [4] [5] [6]

Auxiliary input

General functions

Power/Source Select button: [SRC] Turns on the power. When the power is on, the source switches between Tuner (TUNER) , USB or iPod*1 (USB or iPod), CD (CD) , Auxiliary input (AUX), and Standby (STANDBY) each time this button is pressed. Press at least 1 second to turn off the power.

Faceplate release: Release Releases the faceplate lock so that it can be removed. Refer to the following diagram when reattaching the faceplate.
When an optional accessory is connected, the source name for each device appears. When connection of the iPod is recognized, the source display changes from USB to iPod. *1 Function of KDC-W4544U/ W4644U.
Volume control: [AUD] knob Turn the knob to adjust the volume.
Subwoofer output: [AM] Switches between ON (SW ON) and OFF (SW OFF) each time this button is pressed for at least 2 seconds.
The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. Keep the faceplate in its faceplate case while detached. Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers.
You can do this function when SWPRE in <Menu System> (page 6) is set to SW.
Switching display: [DISP] Changing the information displayed. Refer to page 7 for the details of the display setting. Text/Title scroll: [DISP] Scrolls the CD, audio file, and Radio text display when pressed for at least 1 second. Muting volume upon reception of phone call When there is a call, CALL is displayed and the audio system is paused. When the call ends, CALL disappears and the audio system comes back on. The audio system comes back on when [SRC] is pressed during a call.
Auxiliary input Connect a portable audio device with mini-plug cable (3.5 ).
Use the mini-plug cable which is stereo type and does not have any resistance. The auxiliary input requires the setting made in AUX of <Menu system> (page 6).
To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone accessory. Refer to <Connecting Wires to Terminals> (page 21).
USB device/iPod*1 play: USB Terminal Connecting a USB device starts playback.

Tuner functions

FM band: [FM+] Switches between FM1, FM2, and FM3 each time the [FM+] button is pressed. AM band: [AM] Switches to AM. Tuning: [4]/ [] Changes the frequency.
For the playable audio file, media, and devices, refer to <About Audio file> (page 17). *1 Function of KDC-W4544U/ W4644U.
Pause and play: [6] Switches between pause and play each time this button is pressed. USB device removing: [0] Press this button for 2 seconds or longer to select the remove mode, and the remove the USB device. During the remove mode, REMOVE is displayed. Music search: [4]/ [] Changes the music when this button is pressed. Fast reverses or forwards the music while pressing. (No sound is output while playing audio file.) Folder search: [FM+]/ [AM] Changes the folder containing the audio file. Search mode: Search After pressing this button, you can quickly search songs with the [AUD] knob. See <Music Search> (page 10) for details. Track/ File/ Folder repeat play: [4] Switches between Track Repeat (TRAC REP) and OFF (REP OFF) when pressed while playing a CD. Switches between File Repeat (FILE REP), Folder Repeat (FOLD REP), and OFF (REP OFF) when pressed while playing an audio file.

Use the AUTO1/ AUTO2/ MANUAL in <Menu system> (page 6) to change the frequency switching. During reception of stereo stations the ST indicator is ON.
Preset memory: [1] - [6] Memorizes the station selected when pressing for at least 2 seconds. Preset tuning: [1] - [6] Recalls the memorized station.
Traffic information : [FM+] Turns ON or OFF the Traffic Information function when pressing for at least 2 seconds. When the function is turned ON, TI indicator is ON. If traffic bulletin starts when the function is ON, TRAFFIC is displayed and traffic information is received.
If the volume is adjusted during reception of traffic information, the adjusted volume is memorized automatically. The memorized volume will be applied next time the Traffic Information function is turned ON.
The folder repeat operation cannot be performed while iPod is playing.
Disc & Audio file play functions
Disc play: Disc slot Starts playing when a disc is inserted. When a CD is inserted, the IN indicator is ON.
Scan play: [2] Successively plays the intro of the music in the disc or folder. When Scan Play is turned on, TRAC SCN/ FILE SCN is displayed.
The Scan play operation cannot be performed while iPod is playing.
3 inch (8 cm) CD cannot be used. Attempt to insert using an adapter can cause malfunction.

Disc ejection: [0]

Random play: [3] Randomly plays the music in the disc or folder. When Random Play is turned on, DISC RDM/ FOLD RDM is displayed.
You can eject the disc for 10 minutes after switching off the engine.

Menu System

Set up the following functions. Item CODE SET/ CODE CLR SKIP*1 SYNC DIM ICON SWPRE SPRM NEWS LO.S Setting Entry Setting overview 1 sec. Sets/Resets security code.
Sets the ratio of skip performed with <Music Search for iPod>. Synchronizing the RDS station time data and this units clock. Adjusts the brightness of the display according to the surrounding illumination. Sets the Graphics mode of the display. Sets the preout output. Turns ON/OFF the Supreme function. Turns ON/OFF the News Bulletin Automatic Reception function and sets the news bulletin interrupt disabled time. Only stations whose reception is good are searched in auto seek tuning. Selects the tuning mode of the radio.

Condition Page 14 10

0.5%*/ 1%/ 5%/ 10% OFF/ ON* OFF*/ ON OFF/ ON1/ ON2* R*/ SW OFF/ ON* OFF*/ OFF*/ ON

18 18

AUTO1/ AUTO2/ AUTO1*/ AUTO2/ MANUAL MANUAL A-MEMORY 2 sec. Memorizes six stations with good reception automatically. When station reception is poor, automatically switches to the station AF OFF/ ON* REG ATPS MONO NAME SET RUS*2 SCL AUX OFF CD READ DEMO OFF/ ON* OFF/ ON* OFF*/ ON

Display FREQ/PS R-TEXT FREQ CLOCK
Display D-TITLE T-TITLE P-TIME CLOCK
Display TITLE ALBUM FOLDER FILE P-TIME CLOCK

Next page 3 English | 7

In Standby/ Auxiliary input source Information Display Source name SRC NAME Clock CLOCK
Select the text Press the [DISP] button.
When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes. The Auxiliary input display can be set only when the built-in auxiliary input or the auxiliary input of optional KCA-S220A is used. On the KCA-S220A, AUX EXT is displayed by default.
When you select the clock display, the display setting of each source will be changed to the clock display. If the selected display item does not have any information, alternative information is displayed. When selecting Folder Name while playing with iPod, names will be displayed depending on currently selected browsing items. If the iPod Control by Hand Mode is set to on while playing the iPod, iPodMODE is displayed. If all characters cannot be displayed while playing with iPod, the file number in the list is displayed.
Information Music title Folder name File name
Display TITLE*** FLD*** FILE***
Auxiliary Input Display Setting
Selecting the display when changing to Auxiliary input source.
1 Select Auxiliary input source
Press the [SRC] button. Select the AUX display.

2 Enter Menu mode

3 Select Auxiliary input display setting mode
Press the [FM+] or [AM] button. Select the NAME SET display.
4 Enter Auxiliary input display setting mode
Press the [AUD] knob for at least 1 second. The presently selected Auxiliary input display is displayed.
5 Select the Auxiliary input display
Press the [4] or [] button. AUX/ DVD/ PORTABLE/ GAME/ VIDEO/ TV
6 Exit Auxiliary input display setting mode

Audio Control

You can adjust following Audio Control items; Adjustment Item Display Subwoofer level SW L Bass Boost B.BOOST/ B.B System Q Range 15 +15 1/2/OFF (The indicator turns on according to the setting.) Natural/Rock/Pops/Easy/ Top 40/Jazz/Game/User setting

Audio Setup

You can set Sound system, such as follows; Adjustment Item Display Low Pass Filter LPF Volume offset V-OFF Range 80/120/160/Through(OFF) Hz (AUX: 8 +8)
NATURAL/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ GAME/ USER Bass level* BAS L 8 +8 Middle level* MID L 8 +8 Treble level* TRE L 8 +8 Balance BAL Left 15 Right 15 Fader FAD Rear 15 Front 15 Exit Audio Control mode (Volume control mode)

* Source tone memory: Puts the set up value in the memory per source.
Volume offset: Sets each sources volume as a difference from the basic volume.
1 Select the source to adjust

Press the [SRC] button.

2 Enter Audio Setup mode
Press the [AUD] knob for at least 1 second.
3 Select the Audio Setup item to adjust
Press the [AUD] knob. Turn the [AUD] knob.
4 Adjust the Audio setup item
USER: This appears when Bass level, Middle level, and Treble level are adjusted. When USER is selected, these levels are recalled.
Press the [SRC] button. Press the [AUD] knob. Press the [AUD] knob.
2 Enter Audio Control mode
3 Select the Audio item to adjust 4 Adjust the Audio item

Turn the [AUD] knob.

5 Exit Audio Setup mode

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; Speaker type OFF For 5 & 4 in. speaker For 6 & 6x9 in. speaker For the OEM speaker Display SP OFF SP 5/4 SP 6*9/6 SP OEM
5 Exit Audio Control mode
Press any button. Press a button other than the [AUD] knob.

1 Enter Standby

Press the [SRC] button. Select the STANDBY display.
2 Enter Speaker Setting mode

Press the [AUD] knob.

3 Select the Speaker type
4 Exit Speaker Setting mode
Function of Audio file/ Internal CD source

Music Search

Selecting the music you want to listen to from the device or media being played now.
Function of KDC-W4544U/ W4644U Function of iPod

Music Search for iPod

Search for the song (in iPod) you want to play.
1 Enter Music Search mode
Press the Search button. SEARCH is displayed. Displays the current Audio file name.
Press the Search button. SEARCH is displayed.

2 Search for music

Operation type Movement between items Skip Search *1 Selection of item Return to previous item Return to Top menu Search by initial Operation Turn the [AUD] knob. Press the [4] or [] button. Press the [AUD] knob. Press the [FM+] button. Press the [FM+] button for at least 1 second. Press the Search button for at least 1 second.

Press the desired [1] [6] button for at least 2 seconds.
Recalling the preset Program Type

1 Enter PTY mode

Refer to <PTY (Program Type)> (page 13). Press the desired [1] [6] button.
2 Recall the Program Type
Changing Language for PTY Function
Selecting the Program Type display language as follows; Display ENGLISH FRENCH GERMAN
Speech and Music include the Program type shown below. Music: Black character item. Speech: White character item.
2 Enter Changing Language mode
Press the Search button. During PTY mode the PTY indicator is ON.

3 Select the language

4 Exit Changing Language mode
2 Select the Program Type

Activating Security Code

When Security Code is set, possibility of theft is reduced because input of Security Code is prompted to turn on the unit once it is turned off.
Entering Security Code The Security Code is required to use the audio unit when the unit is first used after removed from the battery power source or the Reset button is pressed.
You can set the Security Code with a 4 digit number of your choice. The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up.
1 Turn the power ON. 2 Do the step 5 through 6 operation, and enter
the Security Code. APPROVED is displayed. Now, you can use the unit.

1 Select Standby

Deactivating Security Code
To deactivate the Security Code function.
3 Select Security Code mode
Press the [FM+] or [AM] button. Select the CODE SET display.
4 Enter Security Code mode
Press the [AUD] knob for at least 1 second. When ENTER is displayed, CODE is also displayed.

5 Enter Security Code

Operation type Select the digits to enter Select the Security Code numbers
Operation Press the [4] or [] button. Press the [FM+] or [AM] button.
6 Confirm the Security Code
Press the [AUD] knob for at least 3 seconds. When RE-ENTER is displayed, CODE is also displayed.
Press the Search button for at least 1 second. MENU is displayed. Press the [FM+] or [AM] button. Select the CODE CLR display. Press the [AUD] knob for at least 1 second. When ENTER is displayed, CODE CLR is also displayed.
Operation type Select the digits to enter Select the Security Code numbers Operation Press the [4] or [] button. Press the [FM+] or [AM] button.
7 Do the step 5 through 6 operation, and reenter
the Security Code. APPROVED is displayed. The Security Code function activates.
6 Press the [AUD] knob for at least 3 seconds.
CLEAR is displayed. The Security Code function deactivates.
If you enter the wrong Code in steps 5 through 6, repeat from step 5. When the Security Code function is activated, CODE SET changes to CODE CLR. To deactivate the Security Code function, see the next section <Deactivating Security Code>.

Menu Glossary

ICON Sets the Graphics mode of the display during normal playback condition. ON1: Turns on. ON2: Displays an animation. OFF: Turns off. SWPRE (Switching Preout) Switches the preout between rear output (R) and subwoofer output (SW). SPRM (Supreme) Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz). Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range. NEWS (News Bulletin with Timeout Setting) Automatically receives news bulletin when it starts. Set the time during which interrupt is to be disabled after start of another news bulletin. Changing NEWS 00M to NEWS 90M turns this function ON. If news bulletin starts when this function is ON, TRAFFIC is displayed and news is received. If 20M is has been set, reception of another news bulletin will not start for 20 minutes. The news bulletin volume is the same level that was set for Traffic Information. AUTO1, AUTO2, MANUAL (Tuning mode select) Select a tuning mode of the radio.

Manual

Display AUTO1 AUTO2
Tuning mode Auto seek Preset station seek
Operation Automatic search for a station. Search in order of the stations in the Preset memory. MANUAL Normal manual tuning control.
AF (Alternative Frequency) When the reception is poor, automatically alternate to another frequency broadcasting the same program in the same RDS network with better reception.
RUS (Russian language setting) When this is set to ON, the following character strings are displayed in Russian: Folder name/ File name/ Song title/ Artist name/ Album name/ KCA-BT200/BT100 (optional accessory)
This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State.
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead.

AUX When this is set to ON, AUX source can be selected. ON1: Outputs the sound of external unit connected to the AUX terminal when switched to AUX source. ON2: Activates the attenuator function when switched to AUX source. Turn off the attenuator function when listening to output from external unit. This prevents the noise when no external unit is connected to AUX terminal. OFF: Disables the selection of AUX source. Set to OFF when not using the AUX terminal. OFF (Power OFF Timer) Setting the timer to turn this units power OFF automatically when Standby mode continues. Using this setting can save the vehicles battery power. : Power OFF Timer function is OFF. 20min: Turns the power OFF after 20 minutes. (Factory setting) 40min: Turns the power OFF after 40 minutes. 60min: Turns the power OFF after 60 minutes. CD READ Sets the method for reading CD. When unable to play special format CD, set this function to 2 to force playing. Note that some music CD may be unplayable even when set to 2. In addition, audio files cannot be played when set to 2. Normally, keep this set to 1. 1 : Automatically distinguishes between audio file disc and music CD when playing disc. 2 : Forces playing as music CD.
The marking of products using lasers (Except for some areas)

CLASS 1 LASER PRODUCT

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.
Declaration of Conformity with regard to the EMC Directive 2004/108/EC

Manufacturer:

Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan

EU Representatives:

Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
Accessories/ Installation Procedure

Accessories

with the ignition, connect the ignition wire to a power source that can be turned on and off with the ignition key. Use a commercially available conversion connector if the connector does not fit in the vehicle connector. Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. If the console has a lid, make sure to install the unit so that the faceplate will not hit the lid when closing and opening. If the fuse blows, first make sure the wires arent touching to cause a short circuit, then replace the old fuse with one with the same rating. Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the - wires or ground them to any metal part in the car. After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. Mount the unit so that the mounting angle is 30 or less.

Front side

FM/AM antenna input (JASO)
Rear output/ Sub Woofer output

Fuse (10A)

To Kenwood disc changer/ External optional accessory (KDC-W4544U/ W4644U only) To connect these leads, refer to the relevant instruction manuals.
Wiring harness (Accessory1) TEL mute wire (Brown)
If no connections are made, do not let the wire come out from the tab.
Power control/ Motor antenna control wire (Blue/White)
Connect to the terminal that is grounded when either the telephone rings or during conversation. To connect the Kenwood navigation system, consult your navigation manual.

P.CONT

ANT.CONT
Connect either to the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle.
Battery wire (Yellow) Ignition wire (Red)

See next page.

A7 Pin (Red) A4 Pin (Yellow)

Connector A Connector B

Connector Function Guide
Pin Numbers for ISO Connectors External Power Connector A-4 A-5 A-7 A-8 Speaker Connector B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 Cable Colour Functions
Yellow Blue/White Red Black
Battery Power Control Ignition (ACC) Earth (Ground) Connection
Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black
Rear Right (+) Rear Right () Front Right (+) Front Right () Front Left (+) Front Left () Rear Left (+) Rear Left ()
2WARNING Connecting the ISO Connector
The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2, make the connection as illustrated. Please be sure to reconnect the cable as shown 2 below to install this unit to the Volkswagen vehicles etc.
1 (Default setting) The A-7 pin (red) of the vehicles ISO connector is linked with the ignition, and the A4 pin (yellow) is connected to the constant power supply.

Ignition cable (Red) Unit Battery cable (Yellow) A-7 Pin (Red) Vehicle A-4 Pin (Yellow)

A-7 Pin (Red)

2 The A-7 pin (red) of the vehicles ISO connector is connected to the constant power supply, and the A-4 pin (yellow) is linked to the ignition.
Ignition cable (Red) Unit Battery cable (Yellow)

Vehicle A-4 Pin (Yellow)

Installation/Removing the Unit
Installation Removing the hard rubber frame 1 Engage the catch pins on the removal tool and
remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure.
Lock Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Catch
Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).

Accessory2 Removal tool

2 When the upper level is removed, remove the

lower two locations.

The frame can be removed from the bottom side in the same manner.
Removing the Unit 1 Refer to the section <Removing the hard rubber
frame> and then remove the hard rubber frame. on each side, as shown. pull out the unit halfway while pressing towards the inside.

Accessory2

2 Insert the two removal tools deeply into the slots 3 Lower the removal tool toward the bottom, and
Be careful to avoid injury from the catch pins on the removal tool.
4 Pull the unit all the way out with your hands, being

careful not to drop it.

Troubleshooting Guide
Some functions of this unit may be disabled by some settings made on this unit. What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems.
Cannot set up the subwoofer. Cannot set up the low pass filter. No output from the subwoofer. <Subwoofer output> of <Basic Operation> (page 4) is not set to On. Preout is not set to subwoofer. SWPRE of <Menu system> (page 6) Cannot register a security code. Cannot set up Display. Power OFF Timer does not function. <Demonstration mode setting> (page 15) is not turned off.

General

The Touch Sensor Tone does not sound. The preout jack is being used. The Touch Sensor Tone cannot be output from the preout jack.

Tuner source

Radio reception is poor. The car antenna is not extended. Pull the antenna out all the way.

Disc source

The specified disc does not play, but another one plays instead. The specified CD is quite dirty. Clean the CD, referring to the CD cleaning of the section on <Handling CDs> (page 3). The disc is loaded in a different slot from that specified. Eject the disc magazine and check the number for the specified disc. The disc is severely scratched. Try another disc instead.

Audio file source

The sound skips when an Audio file is being played. The media is scratched or dirty. Clean the media, referring to the CD cleaning of the section on <Handling CDs> (page 3). The recording condition is bad. Record the media again or use another media.
The messages shown below display your systems condition.
TOC ERR: No disc has been loaded in the disc magazine. The CD is quite dirty. The CD is upsidedown. The CD is scratched a lot. The disc is unreadable. The unit is malfunctioning for some reason. Press the reset button on the unit. If the E-77 code does not disappear, consult your nearest service center. Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. Check the disc magazine. And then press the reset button on the unit. If the E-99 code does not disappear, consult your nearest service center. The CD player section is not operating properly. Reinsert the CD. If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center.

NA DVICE:

An unsupported USB device is connected. Connection to the iPod has failed. Check that the connected iPod is an iPod that is supported. See <About Audio file> (page 17) for information on supported iPods. The connected USB device contains no playable audio file. Media was played that does not have data recorded that the unit can play.

NO MUSIC/E-15:

E-05: E-77:

USB ERR:

Some trouble may have occurred to the connected USB device. Remove the USB device, then cycle the power switch to ON. If the same display is repeated, use another USB device. Connection to the iPod has failed. Remove the USB device and then reconnect it. Confirm that the software for the iPod is the latest version.

iPod ERR:

IN (Blink):
PROTECT (Blink): The speaker wire has a short-circuit or touches the chassis of the vehicle, and then the protection function is activated. Wire or insulate the speaker cable properly and press the reset button. If the PROTECT code does not disappear, consult your nearest service center. NA FILE: COPY PRO: READ ERR:

Frequency response (3 dB) : 20 Hz 20 kHz Input Maximum Voltage : 1200 mV Input Impedance : 10 k
Operating voltage (11 16V allowable) : 14.4 V Maximum Current consumption : 10 A Installation Size (W x H x D) : 182 x 53 x 155 mm Weight : 1.3 kg
Specifications subject to change without notice.

 

Tags

Toolkit 2 Klipschorn ERA-G320 PCN-4550 Printer SCL860 FR965 MO623 CCD-TR5 Navigator Casio 3769 MS-3444DPS MD 5232 Navigator Afti 45 21PT8467-78 IC-M810 3 0 Stylus T10 WJD1667W Lexmark T520 XRS 9330 Laserjet 3020 DH400P AX410 WF-J1454V Acute2 2400 Bearytales 15PF4121 Review KC-51C1 Ms101G A7V266E Continental 1996 MG-605AP DCR-SX44E RAR188A Double II Vtfx665A Setter AG4AH09-12-bwf01 ML1610-TED CS-G95KE SH-D162D RD-JT51 42PF7321 Htz151dvd TX-SR503E S-H510V Z320I KH 5516 Flasher MW8CX-mw10C Microtek C783 351-14 OK-S32SR DVP9000S DMR-EX98VEB Curve 8310 Series 16589 W With Vacf 5 III PJ-LC5 N130 Ka01 CT-W208R GR-602tvpf MB85-P-037 L1942S-PF TDS360T T8611 ZR50 MC WF448AAW BX 1 Nikon F601 DLG0332W DVD-HD745 EFT535X Motorola E2 FTR9965-12S PET1031 K 1000 Movie Castle Isis Hasselblad A12 Rider 11C AT2702 42LG5500 Chronographs Flashmate CCD-TRV138 Yamaha W7 GSX-R1100-1989 Marquis 2003 251-12 GO 300 PH-100 Ca-100 LA26A450c1N

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101