PHONES (044) 360-7-130 (050) 336-0-130 (063) 788-0-130 (067) 233-0-130 (068) 282-0-130
Internet store of autogoods
ICQ 294-0-130 597-0-130 SKYPE km-130
CAR RECEIVERS Receivers Media receivers and stations Native receivers CD/DVD changers FM-modulators/USB adapters Flash memory Facia plates and adapters Antennas Accessories | CAR AUDIO Car audio speakers Amplifiers Subwoofers Processors Crossovers Headphones Accessories | TRIP COMPUTERS Universal computers Model computers Accessories | GPS NAVIGATORS Portable GPS Built-in GPS GPS modules GPS trackers Antennas for GPS navigators Accessories | VIDEO DVR TV sets and monitors Car TV tuners Cameras Videomodules Transcoders Car TV antennas Accessories | SECURITY SYSTEMS Car alarms Bike alarms Mechanical blockers Immobilizers Sensors Accessories | OPTIC AND LIGHT Xenon Bixenon Lamps LED Stroboscopes Optic and Headlights Washers Light, rain sensors Accessories | PARKTRONICS AND MIRRORS Rear parktronics Front parktronics Combined parktronics Rear-view mirrors Accessories | HEATING AND COOLING Seat heaters Mirrors heaters Screen-wipers heaters Engine heaters Auto-refrigerators Air conditioning units Accessories | TUNING Vibro-isolation Noise-isolation Tint films Accessories | ACCESSORIES Radar-detectors Handsfree, Bluetooth Windowlifters Compressors Beeps, loudspeakers Measuring instruments Cleaners Carsits Miscellaneous | MOUNTING Installation kits Upholstery Grilles Tubes Cable and wire Tools Miscellaneous | POWER Batteries Converters Start-charging equipment Capacitors Accessories | MARINE AUDIO AND ELECTRONICS Marine receivers Marine audio speakers Marine subwoofers Marine amplifiers Accessories | CAR CARE PRODUCTS Additives Washer fluid Care accessories Car polish Flavors Adhesives and sealants | LIQUID AND OIL Motor oil Transmission oil Brake fluid Antifreeze Technical lubricant
In store "130" you can find and buy almost all necessary goods for your auto in Kyiv and other cities, delivery by ground and postal services. Our experienced consultants will provide you with exhaustive information and help you to chose the very particular thing. We are waiting for you at the address

http://130.com.ua

KDC-W4544U KDC-W4644U KDC-W4044U KDC-W413U
CD-RECEIVER AMPLI-TUNER LECTEUR DE CD CD-RECEIVER
ua. MODE DEMPLOI om.c BEDIENUNGSANLEITUNG GEBRUIKSAANWIJZING

INSTRUCTION MANUAL

CD RECEIVER

B64-4440-00/00 (EW/E0)

Autogood products internet store http://130.com.ua

Contents

Before use Basic Operation
General functions Tuner functions Disc & Audio file play functions

Appendix

Accessories/ Installation Procedure 20 Connecting Wires to Terminals Installation/Removing the Unit 24 26
Menu System Clock/ Display Settings
Manual Clock Adjustment Text Display Selection Auxiliary Input Display Setting
Troubleshooting Guide Specifications

Audio Adjustments

Audio Control Audio Setup Speaker Setting
Music disc/Audio file Operation
Music Search Music Search for iPod All Random iPod Control by Hand Mode Direct Music Search Direct Disc Search Basic Operation of Disc Changer (Optional)

Tuner Operation

Auto memory entry PTY (Program Type) Program Type preset Changing Language for PTY Function

Other Functions

Activating Security Code Deactivating Security Code Demonstration mode setting
Basic Operations of remote control 16
The AAC logo is a trademark of Dolby Laboratories. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
KDC-W4544U/ KDC-W4644U/ KDC-W4044U/ KDC-W413U Autogood products internet store http://130.com.ua

Before use

that is broadcasting the same program over the same RDS network. Sets whether to switch to the station only in the specific region using the AF control. When traffic information station reception is poor, automatically searches for a station that can be received better. You can reduce the noise when stereo broadcasts are received as monaural. 1 sec. Sets the display when switched to AUX source. Selects Russian as the display language. When set to Auto, scrolls the screen once with the change of the displayed text. Sets whether to display AUX during source selection.
OFF/ ON* AUTO/ MANU* OFF/ ON1*/ ON2 -----/ 20M*/ 40M/ 60M 1*/ 2 OFF/ ON*
Turns off the power when the preset time has lapsed in the Standby mode. Sets the CD read mode. 2 sec. Specifies whether to enable demonstration.

Clock/ Display Settings

*Factory setting *1 Function of KDC-W4544U/ W4644U *2 Function of Russian sales model.
Manual Clock Adjustment 1 Select the Clock display

Press the [DISP] button.

Displayed item is depending on currently selected source or mode. The mark in Condition column shows the condition to which the item is displayed.
: Can be set in other than standby state. : Can be set in standby state. : Can be set while Audio file source of CD/USB (excluding iPod). : Can be set only during playback of the iPod source. (USB source used when the iPod is connected) : Can be set during Tuner source. : Can be set during FM reception. : Can be set while accessing AUX source. : Can be set during all sources.
2 Enter Clock adjustment mode
Press the [DISP] button for at least 1 second. The clock display blinks.

3 Adjusting Clock

Operation type Adjust the hours Adjust the minutes Operation Press the [FM+] or [AM] button. Press the [4] or [] button.
4 Exit Clock adjustment mode
Refer to the respective page for information on how to set the items with reference page number. Only the items available to the current source are displayed.
You can do this adjustment when SYNC in <Menu system> (page 6) is set to OFF.
1 Enter menu mode 2 Select the menu item

Press the [FM+] or [AM] button.
Press the Search button for at least 1 second. MENU is displayed.
3 Set the menu item 4 Exit menu mode

Press the Search button.

Press the [4] or [] button.

Text Display Selection

Changes displayed information on each source following;
In Tuner source Information Program Service name (FM) Radio text (FM) Frequency (MW, LW) Clock In CD & External disc source Information Disc title Track title Play time & Track number Clock In Audio file source Information Music title & Artist name Album name & Artist name Folder name File name Play time & Music number Clock
Display FREQ/PS R-TEXT FREQ CLOCK
Display D-TITLE T-TITLE P-TIME CLOCK
Display TITLE ALBUM FOLDER FILE P-TIME CLOCK

Next page 3 English | 7

In Standby/ Auxiliary input source Information Display Source name SRC NAME Clock CLOCK
Select the text Press the [DISP] button.
When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes. The Auxiliary input display can be set only when the built-in auxiliary input or the auxiliary input of optional KCA-S220A is used. On the KCA-S220A, AUX EXT is displayed by default.
When you select the clock display, the display setting of each source will be changed to the clock display. If the selected display item does not have any information, alternative information is displayed. When selecting Folder Name while playing with iPod, names will be displayed depending on currently selected browsing items. If the iPod Control by Hand Mode is set to on while playing the iPod, iPodMODE is displayed. If all characters cannot be displayed while playing with iPod, the file number in the list is displayed.
Information Music title Folder name File name
Display TITLE*** FLD*** FILE***
Auxiliary Input Display Setting
Selecting the display when changing to Auxiliary input source.
1 Select Auxiliary input source
Press the [SRC] button. Select the AUX display.

2 Enter Menu mode

3 Select Auxiliary input display setting mode
Press the [FM+] or [AM] button. Select the NAME SET display.

3 Open Auto Memory Entry

Press the [AUD] knob for at least 2 seconds. When 6 stations that can be received are put in the memory, auto memory entry closes.

Program Type preset

Putting the Program Type in the Preset button memory and quick recall.
When AF in <Menu System> (page 6) is ON, only RDS stations are put in the memory.
Presetting the Program Type
1 Select the Program Type to preset
Refer to <PTY (Program Type)> (page 13).

PTY (Program Type)

Selecting the Program Type below and searching for a station; Program Type Speech Music News Current Affairs Information Sport Education Drama Culture Science Varied Pop Music Rock Music Easy Listening Music Light Classical Display SPEECH MUSIC NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M EASY M LIGHT M
Program Type Serious Classical Other Music Weather Finance Childrens programs Social Affairs Religion Phone In Travel Leisure Jazz Music Country Music National Music Oldies Music Folk Music Documentary
Display CLASSICS OTHER M WEATHER FINANCE CHILDREN SOCIAL RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT
Language English French German
2 Preset the Program Type
Press the desired [1] [6] button for at least 2 seconds.
Recalling the preset Program Type

1 Enter PTY mode

Refer to <PTY (Program Type)> (page 13). Press the desired [1] [6] button.
2 Recall the Program Type
Changing Language for PTY Function
Selecting the Program Type display language as follows; Display ENGLISH FRENCH GERMAN
Speech and Music include the Program type shown below. Music: Black character item. Speech: White character item.
2 Enter Changing Language mode
Press the Search button. During PTY mode the PTY indicator is ON.

3 Select the language

4 Exit Changing Language mode
2 Select the Program Type

Activating Security Code

When Security Code is set, possibility of theft is reduced because input of Security Code is prompted to turn on the unit once it is turned off.
Entering Security Code The Security Code is required to use the audio unit when the unit is first used after removed from the battery power source or the Reset button is pressed.
You can set the Security Code with a 4 digit number of your choice. The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up.
1 Turn the power ON. 2 Do the step 5 through 6 operation, and enter

Accessory of KDC-W4644U

Basic Operations of remote control

In Tuner source

VOL SRC

ATT VOL

Band select: [FM+]/[AM] Station select: [4]/[] Recall preset stations: [1] [6]

In CD/USB source

Not used.
Music select: [4]/[] Folder/Disc select: [FM+]/[AM]

Pause/Play: [38]

General control
Volume control: [VOL] Source select: [SRC]
Volume reduce: [ATT] When the button is pressed again, the volume returns to the previous level.

In Audio control

Audio item select: [AUD]
About [ ] This button is used when Bluetooth HANDS FREE BOX is connected. For more information, refer to the instruction manual of Bluetooth HANDS FREE BOX. Do not set the remote control in hot places such as on the dashboard.
Loading and Replacing battery
Use two AA/ R6-size batteries. Slide the cover while pressing downwards to remove it as illustrated. Insert the batteries with the + and poles aligned properly, following the illustration inside the case.
Adjust the Audio item: [VOL]
Refer to <Audio Control> (page 9) for the operation method, such as the procedures for Audio control and others operations.

About Audio file

Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) Playable disc media CD-R/RW/ROM Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. Playable USB device USB mass storage class Playable USB device file system FAT16, FAT32 iPod Playable Model KDC-W4544U/ W4644U Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device. Playing order of the Audio file In the example of folder/file tree shown below, the files are played in the order from to.

About USB device

If you start playback after connecting the iPod, the music that has been played by the iPod is played first. In this case, RESUMING is displayed without displaying a folder name, etc. Changing the browse item will display a correct title, etc. You cannot operate iPod if KENWOOD or is displayed on iPod. When the USB device is connected to this unit, it can be charged up provided that this unit is powered. Install the USB device in the place where it will not prevent you from driving your vehicle properly. You cannot connect a USB device via a USB hub and Multi Card Reader. Take backups of the audio files used with this unit. The files can be erased depending on the operating conditions of the USB device. We shall have no compensation for any damage arising out of erasure of the stored data. No USB device comes with this unit. You need to purchase a commercially available USB device. When connecting the USB device, usage of the CAU1EX (option) is recommended. Normal playback is not guaranteed when a cable other than the USB compatible cable is used. Connecting a cable whose total length is longer than 5 m can result in abnormal playback.

: Folder Folder : Audio file Audio fi
An online manual about audio files is put on the site, www.kenwood.com/audiofile/. On this online manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online manual as well.
For operating KCA-BT200 (Optional)
For operation refer to Model-A-1 in the Instruction Manual of KCA-BT200, and the table below. The [AUTO]/[TI] button should be replaced with [SRC] button for <Answering the Waiting Call after Terminating the Current Call>. Notation used in the KCA-BT200 Instruction Manual [38] button Control knob [AUTO]/[TI] button Control knob towards up or down Control knob towards left or right Operation [AUD] knob [AUD] knob [DISP] button [FM+] or [AM] button [4] or [] button
In this manual, the word USB device is used for flash memories and digital audio players which have USB terminals. The word iPod appearing in this manual indicates the iPod connected with the iPod connection cable* (optional accessory). * Not supported model KCA-iP500. Refer to the web site for connectable iPod and iPod connection cable.
www.kenwood.com/ipod/kca_ip/
For operating KCA-BT100 (Optional)
To control KCA-BT100, operate as follows; To make setting for <Selecting the Dialing Mode>, select <Menu system> (page 6). Pressing the [AUD] knob for at least 1 second after selecting the "D.MODE" item allows you to enter the dialing method selection mode. To exit from dialing method selection mode, press Search button. To make <Disconnecting a Call>, <Clearing the Disconnection Message>, and <Rejecting an Incoming call>, press [DISP] button for at least 1 second. Moreover, some displays are different from the description of KCA-BT100 Instruction Manual. Displays of KCA-BT100 Instruction Manual DISCONCT CONNECT PHN-DEL P-STATUS BT-CON Y BT-CON N Actual displays on this unit HF D-CON HF CON DVC-DEL D-STATUS HF-CON Y HF-CON N

Menu Glossary

ICON Sets the Graphics mode of the display during normal playback condition. ON1: Turns on. ON2: Displays an animation. OFF: Turns off. SWPRE (Switching Preout) Switches the preout between rear output (R) and subwoofer output (SW). SPRM (Supreme) Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz). Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range. NEWS (News Bulletin with Timeout Setting) Automatically receives news bulletin when it starts. Set the time during which interrupt is to be disabled after start of another news bulletin. Changing NEWS 00M to NEWS 90M turns this function ON. If news bulletin starts when this function is ON, TRAFFIC is displayed and news is received. If 20M is has been set, reception of another news bulletin will not start for 20 minutes. The news bulletin volume is the same level that was set for Traffic Information. AUTO1, AUTO2, MANUAL (Tuning mode select) Select a tuning mode of the radio.

Manual

Display AUTO1 AUTO2
Tuning mode Auto seek Preset station seek
Operation Automatic search for a station. Search in order of the stations in the Preset memory. MANUAL Normal manual tuning control.
AF (Alternative Frequency) When the reception is poor, automatically alternate to another frequency broadcasting the same program in the same RDS network with better reception.
RUS (Russian language setting) When this is set to ON, the following character strings are displayed in Russian: Folder name/ File name/ Song title/ Artist name/ Album name/ KCA-BT200/BT100 (optional accessory)
This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State.
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead.
AUX When this is set to ON, AUX source can be selected. ON1: Outputs the sound of external unit connected to the AUX terminal when switched to AUX source. ON2: Activates the attenuator function when switched to AUX source. Turn off the attenuator function when listening to output from external unit. This prevents the noise when no external unit is connected to AUX terminal. OFF: Disables the selection of AUX source. Set to OFF when not using the AUX terminal. OFF (Power OFF Timer) Setting the timer to turn this units power OFF automatically when Standby mode continues. Using this setting can save the vehicles battery power. : Power OFF Timer function is OFF. 20min: Turns the power OFF after 20 minutes. (Factory setting) 40min: Turns the power OFF after 40 minutes. 60min: Turns the power OFF after 60 minutes. CD READ Sets the method for reading CD. When unable to play special format CD, set this function to 2 to force playing. Note that some music CD may be unplayable even when set to 2. In addition, audio files cannot be played when set to 2. Normally, keep this set to 1. 1 : Automatically distinguishes between audio file disc and music CD when playing disc. 2 : Forces playing as music CD.
The marking of products using lasers (Except for some areas)

CLASS 1 LASER PRODUCT

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

Declaration of Conformity with regard to the EMC Directive 2004/108/EC

Manufacturer:

Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan

EU Representatives:

Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
Accessories/ Installation Procedure

Accessories

with the ignition, connect the ignition wire to a power source that can be turned on and off with the ignition key. Use a commercially available conversion connector if the connector does not fit in the vehicle connector. Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. If the console has a lid, make sure to install the unit so that the faceplate will not hit the lid when closing and opening. If the fuse blows, first make sure the wires arent touching to cause a short circuit, then replace the old fuse with one with the same rating. Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the - wires or ground them to any metal part in the car. After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. Mount the unit so that the mounting angle is 30 or less.
2..2 Installation Procedure
1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the wire on the wiring harness. 4. Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. 5. Take Connector A on the wiring harness and connect it to the external power connector on your vehicle. 6. Connect the wiring harness connector to the unit. 7. Install the unit in your car. 8. Reconnect the - terminal of the battery. 9. Press the reset button.
About CD players/disc changers connected to this unit
If the CD player/ disc changer has the O-N switch, set it to the N position. The functions you can use and the information that can be displayed may differ depending on the models being connected.
Mounting and wiring this product requires skills and experience. For safetys sake, leave the mounting and wiring work to professionals. Make sure to ground the unit to a negative 12V DC power supply. Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. If the power is not turned ON (PROTECT is displayed), the speaker wire may have a short-circuit or touched the chassis of the vehicle and the protection function may have been activated. Therefore, the speaker wire should be checked. Make sure that all wire connections are securely made by inserting jacks until they lock completely. If your vehicles ignition does not have an ACC position, or if the ignition wire is connected to a power source with constant voltage such as a battery wire, the power will not be linked with the ignition (i.e., it will not turn on and off along with the ignition). If you want to link the units power

Connecting Wires to Terminals
USB connector AUX input (Stereo) Use the mini-plug cable which is stereo type and does not have any resistance.

Front side

FM/AM antenna input (JASO)
Rear output/ Sub Woofer output

Fuse (10A)

To Kenwood disc changer/ External optional accessory (KDC-W4544U/ W4644U only) To connect these leads, refer to the relevant instruction manuals.
Wiring harness (Accessory1) TEL mute wire (Brown)
If no connections are made, do not let the wire come out from the tab.
Power control/ Motor antenna control wire (Blue/White)
Connect to the terminal that is grounded when either the telephone rings or during conversation. To connect the Kenwood navigation system, consult your navigation manual.

P.CONT

ANT.CONT
Connect either to the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle.
Battery wire (Yellow) Ignition wire (Red)

See next page.

A7 Pin (Red) A4 Pin (Yellow)

Connector A Connector B

Connector Function Guide
Pin Numbers for ISO Connectors External Power Connector A-4 A-5 A-7 A-8 Speaker Connector B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 Cable Colour Functions
Yellow Blue/White Red Black
Battery Power Control Ignition (ACC) Earth (Ground) Connection
Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black
Rear Right (+) Rear Right () Front Right (+) Front Right () Front Left (+) Front Left () Rear Left (+) Rear Left ()
2WARNING Connecting the ISO Connector
The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2, make the connection as illustrated. Please be sure to reconnect the cable as shown 2 below to install this unit to the Volkswagen vehicles etc.
1 (Default setting) The A-7 pin (red) of the vehicles ISO connector is linked with the ignition, and the A4 pin (yellow) is connected to the constant power supply.
Ignition cable (Red) Unit Battery cable (Yellow) A-7 Pin (Red) Vehicle A-4 Pin (Yellow)

A-7 Pin (Red)

2 The A-7 pin (red) of the vehicles ISO connector is connected to the constant power supply, and the A-4 pin (yellow) is linked to the ignition.

Ignition cable (Red) Unit Battery cable (Yellow)

Vehicle A-4 Pin (Yellow)

Installation/Removing the Unit
Installation Removing the hard rubber frame 1 Engage the catch pins on the removal tool and
remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure.
Lock Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Catch
Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).

Accessory2 Removal tool

2 When the upper level is removed, remove the

lower two locations.

The frame can be removed from the bottom side in the same manner.
Removing the Unit 1 Refer to the section <Removing the hard rubber
frame> and then remove the hard rubber frame. on each side, as shown. pull out the unit halfway while pressing towards the inside.

Accessory2

2 Insert the two removal tools deeply into the slots 3 Lower the removal tool toward the bottom, and
Be careful to avoid injury from the catch pins on the removal tool.
4 Pull the unit all the way out with your hands, being

careful not to drop it.

Troubleshooting Guide
Some functions of this unit may be disabled by some settings made on this unit. What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems.
Cannot set up the subwoofer. Cannot set up the low pass filter. No output from the subwoofer. <Subwoofer output> of <Basic Operation> (page 4) is not set to On. Preout is not set to subwoofer. SWPRE of <Menu system> (page 6) Cannot register a security code. Cannot set up Display. Power OFF Timer does not function. <Demonstration mode setting> (page 15) is not turned off.

General

The Touch Sensor Tone does not sound. The preout jack is being used. The Touch Sensor Tone cannot be output from the preout jack.

Tuner source

Radio reception is poor. The car antenna is not extended. Pull the antenna out all the way.

Disc source

The specified disc does not play, but another one plays instead. The specified CD is quite dirty. Clean the CD, referring to the CD cleaning of the section on <Handling CDs> (page 3). The disc is loaded in a different slot from that specified. Eject the disc magazine and check the number for the specified disc. The disc is severely scratched. Try another disc instead.

Audio file source

The sound skips when an Audio file is being played. The media is scratched or dirty. Clean the media, referring to the CD cleaning of the section on <Handling CDs> (page 3). The recording condition is bad. Record the media again or use another media.
The messages shown below display your systems condition.
TOC ERR: No disc has been loaded in the disc magazine. The CD is quite dirty. The CD is upsidedown. The CD is scratched a lot. The disc is unreadable. The unit is malfunctioning for some reason. Press the reset button on the unit. If the E-77 code does not disappear, consult your nearest service center. Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. Check the disc magazine. And then press the reset button on the unit. If the E-99 code does not disappear, consult your nearest service center. The CD player section is not operating properly. Reinsert the CD. If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center.

NA DVICE:

An unsupported USB device is connected. Connection to the iPod has failed. Check that the connected iPod is an iPod that is supported. See <About Audio file> (page 17) for information on supported iPods. The connected USB device contains no playable audio file. Media was played that does not have data recorded that the unit can play.

NO MUSIC/E-15:

E-05: E-77:

USB ERR:

Some trouble may have occurred to the connected USB device. Remove the USB device, then cycle the power switch to ON. If the same display is repeated, use another USB device. Connection to the iPod has failed. Remove the USB device and then reconnect it. Confirm that the software for the iPod is the latest version.

Frequency response (3 dB) : 20 Hz 20 kHz Input Maximum Voltage : 1200 mV Input Impedance : 10 k
Operating voltage (11 16V allowable) : 14.4 V Maximum Current consumption : 10 A Installation Size (W x H x D) : 182 x 53 x 155 mm Weight : 1.3 kg
Specifications subject to change without notice.

(044) 360-7-130 (050) 336-0-130 (063) 788-0-130 (067) 233-0-130 (068) 282-0-130
ICQ 294-0-130 597-0-130 SKYPE km-130
- CD/DVD FM-/USB Flash | | | GPS GPS GPS GPS GPS GPS | | | , | | | | - , Bluetooth , | | - | | |

130 . , .

http://130.com.ua
KDC-W4544U KDC-W4644U KDC-W4044U KDC-W413U
CD-RECEIVER AOM KOMAKTKAM
ua. HCTPKCm KCATA O co 0. 13

INSTRUCTION MANUAL

B64-4443-00/00 (E20)

- http://130.com.ua

33 /C 49

50 52

/ 36

iPod iPod ()

PTY ( ) PTY

The AAC logo is a trademark of Dolby Laboratories. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
KDC-W4544U/ KDC-W4644U/ KDC-W4044U/ KDC-W413U - http://130.com.ua

2 B / :

B e (. ) . Kenwood. Kenwood, . : A-Z 0-9 @ " ` % & * + = ,. / \ < > [ ] ( ): ; ^ - { } | ~. RDS , . , , , , . , , , , .

. < > (. 41).

( .) (Reset). , .
. - . - . . . - , . - , .

, , ,. , , , .

. .

.

- . , -. , . , Kenwood.
-, . . , , . - CD-R CD-RW . ( CD-R/CD-RW CD-R/CD-RW.)

Pycc |

[SRC] [FM+] [AM] [ ] USB

[DISP] [AUD]

[1] [2] [3] [4] [5] [6]
/ : [SRC] . (TUNER) , USB iPod*1 (USB iPod), - (CD), (AUX) (STANDBY). , .
. iPod, USB iPod. *1 KDC-W4544U/ W4644U.

: [AUD] .

, . , . ( ) , . . .
: [AM] 2 (SW ON) (SW OFF).
: [DISP] . 33. /: [DISP] CD, . CALL . CALL , . [SRC].
, SWPRE < > (. 32) SW.

(3.5 ).

, . AUX < > (. 32).

: (Release) , .

,
, . < > (. 47).
, . < > (. 43). *1 KDC-W4544U/ W4644U.
FM- : [FM+] [FM+] FM1, FM2 FM3. AM- : [AM] AM. : [4]/ [] .
: [6] / . USB-: [0] 2 , USB-. REMOVE. : [4]/ [] . . ( .) : [FM+]/ [AM] , . : [AUD]. . < > (. 36). //: [4] (TRAC REP) (REP OFF) -. (FILE REP), (FOLD REP),. (REP OFF).
AUTO1/ AUTO2/ MANUAL() < > (. 32). ST.
: [1] - [6] 2. : [1] - [6] .
: [FM+] 2 . TI. , , TRAFFIC .

, . .

iPod .

: . , IN.

: [2] . TRAC SCN/ FILE SCN.

3- (8 ) CD. .

: [0]

iPod .

10 .
USB-/ iPod*1: USB USB- .
: [3] . DISC RDM/ FOLD RDM.
; CODE SET/ CODE CLR SKIP*1 SYNC DIM ICON SWPRE SPRM NEWS LO.S 1. .
< iPod>. RDS . . . . / . / . . .

40 36

0.5%*/ 1%/ 5%/ 10% OFF/ ON* OFF*/ ON OFF/ ON1/ ON2* R*/ SW OFF/ ON* OFF*/ OFF*/ ON

44 44

AUTO1/ AUTO2/ AUTO1*/ AUTO2/ MANUAL MANUAL A-MEMORY 2. AF REG ATPS MONO NAME SET RUS*2 SCL AUX OFF CD READ DEMO OFF/ ON* OFF/ ON* OFF/ ON* OFF*/ ON

OFF/ ON* AUTO/ MANU* OFF/ ON1*/ ON2 -----/ 20M*/ 40M/ 60M 1*/ 2 OFF/ ON*
. , RDS. AF. . , . 1. . . Auto, . . . CD. 2. / .
* *1 KDC-W4544U/ W4644U *2 .

1

[DISP].

. , .

: . : . : CD/USB ( iPod). : iPod. (USB iPod) : . : FM-. : . : .

[DISP] 1. .

[FM+] [AM]. [4] [].
, SYNC < > (. 32) OFF ().

, . .

1. MENU.

2 3

[FM+] [AM]. [4] [].
(FM) FREQ/PS (FM) R-TEXT (MW, LW) FREQ CLOCK
- D-TITLE T-TITLE P-TIME CLOCK
TITLE ALBUM FOLDER FILE P-TIME CLOCK 3 Pycc | 33 - http://130.com.ua

/ SRC NAME CLOCK

[DISP].
[4] []. AUX/ DVD/ PORTABLE/ GAME/ VIDEO/ TV
. , . Folder Name iPod . iPod iPod, "iPodMODE". iPod , .
10 , . , KCA-S220A. KCA-S220A, AUX EXT .

. [SRC]. AUX.

TITLE*** FLD*** FILE***

[FM+] [AM]. NAME SET.

[AUD] 1. .
; SW L 15 +15 B.BOOST/B.B 1/2/OFF ( ). / / System Q NATURAL/ / / ROCK/ POPS/ EASY/ 40 / / / TOP40/ JAZZ/. GAME/ USER * BAS L 8 +8 * MID L 8 +8 * TRE L 8 +8 BAL 15 15 FAD 15 / 15 ( )

* : .

LPF 80/120/160/ () V-OFF (.: -8 +8)

: .

[SRC].

2 "

" [AUD] 1.

[AUD].

[AUD]. [AUD] 1.

USER: , , . USER.

System Q ; 5 & 4. 6 & 6x9. SP OFF SP 5/4 SP 6*9/6 SP OEM

[AUD].

[AUD].

[SRC]. STANDBY.

. [AUD].

[AUD]. Pycc |

/ - KDC-W4544U/ W4644U iPod

, .

, ( iPod).

. SEARCH.

. SEARCH. .
*1 [AUD]. [4] []. [AUD]. [FM+]. [FM+] 1. 1.
/ / [AUD], [FM+]/[AM]. [AUD] []. [4].
[4] 1. () : , . () : , . () : , . () : , - . () : , .

.

. (, , .) .

1. A B C.

, .
/ [AUD], [FM+]/[AM]. [AUD]. [4] 1.
. . [AUD], [4]/[]. [FM+] [AM]. .

.

[AUD]. . .
*1 : . SKIP < > (. 32). 3- 10 % . iPod . * 1 . a, an, the, . , , ,. , .
" " iPod songs (""). , . , " " , , .

KDC-W4544U/ W4644U iPod

iPod
iPod . [1]. iPod ("HANDS ON") ("MODE OFF").
PLIST*** ART*** ALB*** PRGM***

PDCT*** GEN*** COM***

iPod, iPod . . "iPodMODE". iPod : iPod nano (1- ) iPod . iPod' , iPod'.

KDC-W4644U

iPod . [3] 3-. (ALL RDM) (RDM OFF).

[4] [].

[38].

iPod .

iPod, .
KDC-W4644U KDC-W4544U/ W4644U -

[FM+] [AM]. A-MEMORY.

[FM+] [AM].

[AUD] 2. 6 , .

. 10 0.

KDC-W4544U/ W4644U

- ()
- [SRC]. CD CH. [4] [].
AF < > (. 32) , RDS.
SPEECH MUSIC NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M EASY M LIGHT M CLASSICS OTHER M

PTY ( )

; WEATHER FINANCE CHILDREN SOCIAL RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT
[FM+] [AM]. () [4]. (TRAC REP), (DISC REP) (REP OFF). , ( ) [5]. (MGZN RDM) (RDM OFF).

, . : . : .

1 PTY

. PTY PTY.

; ENGLISH FRENCH GERMAN

[4] [].

. <PTY ( )> (. 38).

4 PTY

AM. , NO PTY. .
. <PTY ( )> (. 38).

[1] [6] 2.

[1] [6].

, .

>.

4-- . . .

Reset.

1 Standby

1 . 2

. APPROVED. .

[FM+] [AM]. CODE SET. [AUD] 1. ENTER CODE.
, [4] []. [FM+] [AM].
[SRC]. STANDBY. 1. MENU. [FM+] [AM]. CODE CLR.
[AUD] 1. ENTER CODE CLR.
[AUD] 3. RE-ENTER CODE.

. APPROVED. .

, , 5. , CODE SET CODE CLR. , <

6 [AUD] 3

. CLEAR. . .

, ERROR.

; DEMO ON DEMO OFF . ( ).

[FM+] [AM]. DEMO.

[AUD] 2.

KDC-W4644U

: [FM+]/ [AM] : [4]/[] : [1] - [6]

ATT VOL

CD/USB
: [4]/[] /: [FM+]/ [AM] /: [38]

: [VOL] : [SRC]

: [ATT] .

: [AUD]

[ ] Bluetooth HANDS FREE BOX. . Bluetooth HANDS FREE BOX. , .
2 AA/ R6. , , . , + , , .

: [VOL]

. < > (. 35) , .
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) CD-R/RW/ROM ISO 9660, 1/2, Joliet, Romeo, . USB USB USB FAT16, FAT32 iPod KDC-W4544U/ W4644U , . /, , .
iPod, , iPod, . RESUMING . . . iPod KENWOOD . USB, ( , ). USB , . USB USB- Multi Card Reader. , . USB. , . USB. USB, . USB CA-U1EX ( ). , USB, . , 5 , .

: Folder : Audio fi

www.kenwood. com/audiofile/. , . .
USB - , USB. "iPod", , iPod, iPod* ( ). * KCA-iP500. iPod iPod.

KCA-BT200 ()

Model-A-1 KCABT200, . [AUTO]/[TI] [SRC] < >. , KCA-BT200 [38] [AUTO] / [TI]
www.kenwood.com/ipod/kca_ip/
[AUD] [AUD] [DISP] [FM+] [AM] [4] [] Pycc |

KCA-BT100 ()

KCA-BT100 : < (Selecting the Dialing Mode)>, < > (. 32). [AUD] "D.MODE" . . < >, < > < > [DISP] . KCA-BT100. KCA-BT100 DISCONCT CONNECT PHN-DEL P-STATUS BT-CON Y BT-CON N HF D-CON HF CON DVC-DEL D-STATUS HF-CON Y HF-CON N NEWS () ( ) . , . NEWS 00M NEWS 90M . , , TRAFFIC . 20M, 20. . AUTO1, AUTO2, MANUAL ( ) . AUTO1 . AUTO2 . MANUAL .
ICON . ON1:. ON2: . OFF:. SWPRE ( ) (R) (SW). SPRM ( ) , , ( 128 , 44,1). (AAC, MP3 WMA) . , , .
AF ( ) , , RDS . RUS ( ) , : / / / / / KCA-BT200/ BT100 ( )
AUX ON (), . ON1: , AUX, AUX. ON2: AUX. .
, , . OFF: AUX. (OFF), AUX. OFF ( ) . . : . 20min: 20. ( ) 40min: 40. 60min: 60. CD READ CD. CD, 2 . , , 2. , , 2. 1. 1 : CD . 2 : , CD.
, , Ba 7. p, a. o , , e.

, ( )

CLASS 1 LASER PRODUCT

, , 1. , . .

1..1 2..2
1. -. 2. . 3. . 4. B c 5. c . 6. . 7. . 8. -. 9. .
. , . . "", , , (.e. ). , . , . . . , , /. , , , , . . , - , . , , . , 30.
. . C 12 B . , , . . , , . . ( PROTECT), , , , . ,

/ ,

/ - O-N, N. , , , , .

USB AUX () , .

FM/AM- (JASO)
/ (10 ) Kenwood/ ( KDC-W4544U/ W4644U) , .

TEL mute ()

, . / (/)

, , . Kenwood .

P.CONT

ANT.CONT

- , , .

K () K ()

. 7 () -4 ()
ISO A-4 A-5 A-7 A-8 B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8