Kenwood KRF-V5200D Manual
Kenwood KRF-V5200d Home Cinema Amplifier, size: 5.4 MB
Here you can find all about Kenwood KRF-V5200D like manual and other informations. For example: price.
Kenwood KRF-V5200D manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Kenwood KRF-V5200D please write about it to help other people. [ Report abuse or wrong photo | Share your Kenwood KRF-V5200D photo ]
Kenwood DVF 5400, KRF V5200D (czarny), Heco Victa 500 ...
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
AUDIO VIDEO CONTROL CENTER
B60-5676-00/00 (E, X) KW
Before applying power
Caution : Read this page carefully to ensure safe operation. Units are designed for operation as follows. Australia...AC 240 V only Europe....AC 230 V only
Unpack the unit carefully and make sure that all the accessories are present. FM indoor antenna (1) AM loop antenna (1)
Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU countries that have adopted separate waste collection systems)
Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment should be recycled at a facility capable of handling these items and their waste by products. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment.
Remote control unit (1) RC-R0517
Batteries (R03) (2)
If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and packing materials in case you need to move or ship the unit in the future. Keep this manual handy for future reference.
Notes on instructions Safety precautions
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
RISK OF ELECTRIC SHOCK DO NOT OPEN
The operating instructions given in this manual assume that the user mainly operates the receiver using the remote control unit. When the same operation is also available on the main unit, the operating method is indicated in illustrations. The [VOLUME CONTROL], [MULTI CONTROL] and [INPUT SELECTOR] knobs on the main unit are operated by turning the knobs clockwise or counterclockwise.
Getting into the setup mode
The setup procedure is identical for all of the setting elements. Once you remember the following procedure, you can easily set up other setting elements.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT S E N C LO S U R E T H AT MAY B E O F S U F F I C I E N T MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
SETUP MULTI CONTROL
The knob on the main unit is pointed with an arrow to indicate that it can be turned in either direction. The operating procedures refer to those of the remote control unit. Some SETUP MULTI CONTROL operations are also / available using the key (or knob) of the same name on the main unit.
Press [SETUP] to enter the setup mode. Use [MULTI CONTROL 5/] to select the element to setup.
Display "SP SETUP" "TEST TONE" "DISTANCE" "LFE LVL" "EXIT" Selection Speaker setup Test tone Distance Low frequency effects level Exit the setup mode.
Press [SETUP] to get into the setup mode of the selected element.
Options to be selected are listed in a table.
IMPORTANT SAFETY INSTRUCTIONS
Caution : Read this page carefully to ensure safe operation.
Read Instructions All the safety and operating instructions should be read before the product is operated. Retain Instructions The safety and operating instructions should be retained for future reference. Heed Warnings All warnings on the product and in the operating instructions should be adhered to. Follow Instructions All operating and use instructions should be followed. 1. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 2. Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards. 3. Water and Moisture This product shall not be exposed to dripping and splashing for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. Do not place an object containing liquid, such as a flower vase, on the appliance. 4. Accessories Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer. Any mounting of the product should follow the manufacturers instructions, and should use a mounting accessory recommended by the manufacturer. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 5. Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. 6. Power Sources This product should be operated only from the type of power source indicated on the product. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. 7. 12. Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 13. Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance this indicates a need for service. g) If an abnormal smell or smoke is detected. 14. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 15. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 16. Wall or Ceiling Mounting This product should be mounted to a wall or ceiling only as recommended by the manufacturer. 17. Heat This product should be situated away from heat sources such as radiators, heat registers, stoves, or other products that produce heat. Do not place a flaming object, such as a candle or lantern, or near the product. 18. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 19. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
CAUTION Polarization This product may be equipped
with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
8. Power Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 9. Lightning For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 10. Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 11. Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE
ANTENNA LEAD IN WIRE GROUND CLAMPS ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMP POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
NEC NATIONAL ELECTRICAL CODE
Notes: 1. Item 7 is not required except for grounded or polarized equipment. 2. Item 19 complies with UL in the U.S.A.
To ensure safety, read the items carrying this marking carefully.
Before applying power.. 2
Safety precautions...2 Unpacking....2 Notes on instructions...2
Further adjustments.. 32
Fine adjustment of the sound... 32
Additional functions.. 34
Convenient functions.. 34
Remote control operations for Kenwood DVD players... 35 Troubleshooting.. 36 Specifications.. 38
IMPORTANT SAFETY INSTRUCTIONS. 3
Names and functions of parts.. 5
Main unit...5 Remote control unit...6 Preparing the remote control..7
PURE AUDIO MODE
This is the mode for enjoying audio sources in high-quality stereo. It shuts off the power to the video circuitry as well as the display to eliminate their influence on the audio circuitry and improve the reproduced audio quality.
Setting up the system.. 8
Speaker placement...8 Digital connections...9 Connecting a DVD player (6-channel input). 10 Connecting audio components.. 11 Connecting video components.. 12 Connecting video components (COMPONENT VIDEO) (For Australia). 13 Connecting the speakers... 14 Connecting the terminals.. 15 Connecting the antennas.. 15
True home theater sound
This unit incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software. Select a surround mode according to your equipment or the software you are going to play and enjoy! Dolby Digital Dolby Pro Logic II DTS DSP surround modes DVD 6-channel input
Speaker settings.. 16
Speaker setup (Easy Setup)... 16 Speaker setting flow... 17 Getting into the setup mode.. 17 Speaker setup ("SP SETUP")... 18 Adjusting the speaker level ("TEST TONE").. 18 Distance setting ("DISTANCE")... 19 Low frequency effects level ("LFE LVL"). 19
Normal Playback.. 20
Preparing for playback.. 20 Listening to a source component.. 21 Listening to music with PURE AUDIO MODE. 21 Adjusting the sound.. 22
Ambience effects.. 23
Surround modes.. 23 Surround play.. 25 DVD 6-channel playback... 26
Listening to radio broadcasts.. 27
Tuning (non-RDS) radio stations. 27 Using RDS (Radio Data System).. 27 RDS Auto Memory... 28 Presetting radio stations manually.. 28 Receiving preset stations.. 29 Receiving preset stations in order (P.CALL).. 29 Tuning by Program TYpe (PTY search).. 30 Using the RDS DISP. (display) key.. 30
Recording mode setting in digital audio source recording (main unit only).. 31 Recording audio (analog sources).. 31 Recording video... 31
Names and functions of parts
PTY indicator Speaker indicator AUTO indicator Frequency display, Input display, Preset channel display, Surround mode display AUTO DETECT indicator DIGITAL indicator Band indicators DSP MODE indicator RDS indicator
CLIP indicator MUTE indicator TONE indicator TUNED indicator ST. indicator Input channel status indicator DOLBY DIGITAL indicator PRO LOGIC indicator 6CH INPUT indicator DTS indicator
INPUT SELECTOR PURE AUDIO MODE
Connecting the antennas
The broadcast reception cannot be made unless the antennas are connected. Connect the antennas correctly as instructed below.
AM GND FM 75
AM loop antenna
Place the supplied loop antenna as far as possible from the receiver, TV set, speaker cords and power cord. Adjust the direction for best reception.
Attach to the stand FM indoor antenna
Attach to the stand.
FM outdoor antenna (commercially available)
Use an antenna adapter (commercially available)
Speaker setup (Easy Setup)
The speaker settings can be completed by simply selecting the room type and listening position. The audio will be corrected automatically according to the characteristics of the speaker system in use. If more detailed speaker settings are required, use the procedure in <Speaker setting flow> &.
Use [MULTI CONTROL 5/] to select your listening position.
FRONT CENTER REAR
EASY SETUP MULTI CONTROL
/ Press [EASY SETUP].
The speakers are set up as shown below. Subwoofer : ON Front speaker: Average size Center speaker: Average size Surround speaker: Average size Subwoofer re-mix* : ON * The function for adding the bass of other channels to the subwoofer channel according to the speaker setup.
Press [EASY SETUP] to enter the easy setup mode. Use [MULTI CONTROL 5/] to select your room type.
5m (16'5-3/8") 4m (13'1-7/8")
Note: Easy setup with may not be appropriate with certain speaker systems or listening environment. In this case, go through <Speaker setup ("SP SETUP")> *.
Press [EASY SETUP].
Speaker setting flow
The detailed settings below allow you to enjoy full performance of the receiver according to the environment of your listening room. Speaker settings consist of 4 elements.
Speaker Setup ("SP SETUP") *
Select whether each speaker channel is used or, if used, its size. The Easy Setup function also allows you to make speaker settings easier. See <Speaker setup (Easy Setup)> ^
Test Tone ("TEST TONE") *
Select the output level from each speaker.
SETUP MULTI CONTROL /
Select the music source you want to listen to. Start playback from the selected source. Press [PURE AUDIO MODE].
While in PURE AUDIO MODE, the listen mode is set to stereo. The display will be turned off and PURE AUDIO MODE indicator lights up.
PURE AUDIO MODE indicator
When using the main unit: Use [INPUT SELECTOR] to select a source.
The input sources change as shown below with [INPUT SELECTOR]: 1 Tuner (FM/AM broadcast reception) 2 "CD/DVD" 3 "MD/TAPE" 4 "VIDEO1" 5 "VIDEO2" 6 "DVD/6CH" 7 "AUX" "AV AUX" can be selected with [AV AUX].
Press [PURE AUDIO MODE] again.
PURE AUDIO MODE is also cancelled when listen mode is changed. See <Surround play>. Notes: When the input mode is "6CH INPT", the listen mode does not change. (<Selecting the input mode> )) During PURE AUDIO MODE, no video signal is output. When the PURE AUDIO MODE is canceled, the listen mode remains in stereo if the input signal is digital.
Start playback from the selected source. Use [VOLUME %/] to adjust the volume.
Adjusting the sound
One-touch low frequency emphasis (Bass Boost) (remote control only)
You can adjust the sound quality when this unit is in the PCM stereo and analog stereo modes.
Press [BASS BOOST].
MULTI CONTROL ACTIVE EQ
ACTIVE EQ BASS BOOST TONE MULTI CONTROL /
Press the key once to select the maximum (+10) low frequency emphasis setting. TONE will automatically be turned ON. This key does not function when this unit is in the sound quality or ambience effects adjustment mode. When the ACTIVE EQ mode is set to ON, set it to OFF and then control the BASS BOOST setting.
Press [BASS BOOST] again.
Muting the sound (remote control only)
MUTE Press [MUTE] to mute the sound of the speakers.
"MUTE" indicator blinks.
Adjusting the Tone (remote control only)
You can adjust the sound quality when this unit is in the PCM stereo and analog stereo mode.
Press [MUTE] again so that the "MUTE" indicator goes off.
MUTE can also be deactivated by adjusting volume.
Press [TONE] to select the Tone mode. Use [MULTI CONTROL 5/] to select "TONE ON" or "TONE OFF".
ACTIVE EQ mode
You can enjoy a more impressive sound effect when ACTIVE EQ is turned ON during Dolby Digital and DTS playback and, when in PCM and analog stereo mode.
Press [ACTIVE EQ] for the following selections; When in "TONE ON" selection, press [TONE] for the following displays.
Display "BASS" "TREB" Setting Adjusts low frequency range. Adjusts high frequency range. Range -10 +10 (in 2 step) -10 +10 (in 2 step) Display "ACTIVE EQ MUSIC" "ACTIVE EQ CINEMA" "ACTIVE EQ GAME" "ACTIVE EQ OFF" Setting Effective when listening to music. Effective when watching a movie. Effective when playing a game. Active EQ function is off.
Use [MULTI CONTROL 5/] to adjust the sound quality.
ACTIVE EQ function will not be available when REC MODE, AUTO TUNING or PRESET MEMORY is ON and during 96kHz LPCM playback.
ACTIVE EQ indicator lights up.
When the ACTIVE EQ mode is set to ON, set it to OFF and then control the TONE setting.
This unit is equipped with listen modes that allow you to enjoy an enhanced sonic ambience with a variety of video sources. In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand. See <Speaker settings> ^.
Dolby Digital is a highly sophisticated and versatile audio encoding/decoding technology. Dolby Digital technology can transmit mono, stereo (two-channel), or up to 5.1-channel surround sound (discrete* multichannel audio). In 5.1-channel surround sound, the three front channels (Left/Center/Right) deliver crisp, clean dialogue and accurate placement of on-screen sounds, while twin surround channels (Left Surround/Right Surround) wrap around the audience and immerse them in the action. The LFE (Low-Frequency Effects) channel delivers real impact for explosions and other effects that can, literally, be felt as well as heard. The superior coding efficiency of Dolby Digital-and its ability to deliver high-quality discrete multichannel audio without compromising video quality has made it the designated audio standard for DVD worldwide. * The sound information contained in each of the six available channels is distinct and independent. These six channels are described as a "5.1-channel" system, because there are five full-bandwidth channels with 3 Hz to 20 kHz frequency range for Front Left and Right, Center, and Surround, plus one "Low Frequency Effects" (LFE) subwoofer channel devoted to frequencies from 3 to 120 Hz.
The below speaker placements are for 5.1 channel surround sound system which are;
Dolby Digital Dolby Pro Logic II DTS DSP mode DVD 6-channel
Dolby Pro Logic II
Dolby Pro Logic II technology processes any high quality stereo (two-channel) movie and music audio into five playback channels of full-bandwidth surround sound. A matrix surround decoding technology, Dolby Pro Logic II detects the directional cues that occur naturally in stereo content and uses these elements to create a five-channel surround sound playback experience. Dolby Pro Logic II is fully compatible with all Dolby Pro Logic technologies. It provides optimal audio for playback in a 5.1channel home theater system for the thousands of videocassettes and TV programs encoded in four-channel Dolby Surround (the encoding counterpart to Dolby Pro Logic's decoding technology). (Dolby Pro Logic II surround Movie mode) Dolby Pro Logic II also enables video game consoles to encode five-channel surround sound information into a stereo signal with virtually no impact on the console's CPU, which means all this extra audio won't slow your game down. (Dolby Pro Logic II surround Game mode) Dolby Pro Logic II can bring new life to your CD collection. Play your music through your home theater system, and you'll hear seamless, natural sound with new depth and detail. It's almost like hearing a newly remastered CD. (Dolby Pro Logic II surround Music mode)
Select the listen mode according to the source being played back.
When "Dolby Digital" is selected:
"DOLBY DIGITAL" will scroll from right to left.
When the DTS signal is input:
LISTEN MODE VOLUME CONTROL
Listen mode DTS 5.1 channel surround mode Stereo mode
Indicator "DTS" "DTS"
When "DTS" is selected:
LISTEN MODE VOLUME /
When the analog signal or digital signal (except for Dolby Digital or DTS signal) is input:
Display "PL II MOVIE" "PL II MUSIC" "PL II GAME" "PRO LOGIC" "ARENA" "JAZZ CLUB" "THEATER" "STADIUM" "DISCO" "STEREO" Listen mode Pro Logic II surround Movie mode Pro Logic II surround Music mode Pro Logic II surround Game mode Pro Logic mode DSP surround ARENA mode DSP surround JAZZ CLUB mode DSP surround THEATER mode DSP surround STADIUM mode DSP surround DISCO mode Stereo mode Indicator "PRO LOGIC" "PRO LOGIC" "PRO LOGIC" "PRO LOGIC" "DSP MODE" "DSP MODE" "DSP MODE" "DSP MODE" "DSP MODE"
Turn on the related components. Complete <Speaker settings>. ^ Select the source you wish to play back with surround sound. Select the input mode (analog or digital) for the source you wish to playback. (Noise may be produced when a DTS source is played by selecting the analog input.) )
Adjust the volume.
Notes: Depending on the type of the signal or speaker setting, some listen modes cannot be selected. When playback is started, the sound may be cut or interrupted before the input source is confirmed as Dolby Digital. To enjoy Dolby Digital surround (as well as all the other listen modes) from a single component, be sure to use a Dolby Digital compatible source component. Dolby Digital or DTS signal having more channels than the maximum number of playback channels available using this units current settings is input, downmixing is performed to match the number of available channels.
Start playing the video software. Press [LISTEN MODE] to select the listen mode.
The listen mode settings are stored separately for each input. If the input mode is set to full auto ("AUTO DETECT" lights), the unit selects the optimal listen mode automatically based on the type of input signal and the speaker settings. Each press of [LISTEN MODE] switches the setting as listed.
When the Dolby Digital signal is input:
Display "DOLBY DIGITAL" "PL II MOVIE"* "PL II MUSIC"* "PL II GAME"* "PRO LOGIC"* "STEREO" Listen mode Dolby Digital surround mode Pro Logic II surround Movie mode Pro Logic II surround Music mode Pro Logic II surround Game mode Pro Logic mode Stereo mode Indicator "DOLBY DIGITAL" "DOLBY DIGITAL" and "PRO LOGIC" "DOLBY DIGITAL" and "PRO LOGIC" "DOLBY DIGITAL" and "PRO LOGIC" "DOLBY DIGITAL" and "PRO LOGIC" "DOLBY DIGITAL"
* Available when the input signal has only 2 channels.
96kHz LPCM playback
This unit is compatible with the 96kHz LPCM playback. To play a 96kHz DVD, set the listen mode to "STEREO". In "F-AUTO" input mode, the listen mode will automatically be STEREO. When in "D-MANUAL" input mode (listen mode is not STEREO), "FS 96kHz" will appear in the display and no sound can be heard from the speakers. Press [LISTEN MODE] (the listen mode changes to the "STEREO" mode) to output sound from the speakers.
DVD 6-channel playback
Using a DVD player or the like equipped with six (5.1) output channels and this unit, you can enjoy surround sound playback. Connecting a DVD player which can decode the surround signal itself is also acceptable.
INPUT MODE VOLUME CONTROL
Connect your DVD player to the DVD/6CH INPUT jacks of this unit. Turn on all other components that will be used. Complete <Speaker settings>.
Select "DVD/6CH" as the input source. Press [INPUT MODE] to select "6CH INPT". Start playback of a DVD disc. Adjust the volume.
Notes: It is not possible to adjust the speaker level or sound effect ([SETUP], [SOUND], [LISTEN MODE], [ACTIVE EQ] and [TONE] will not be functional) of the channels separately when this unit is in the 6CH INPUT mode. Adjust the speaker level with the controls of the DVD player. Refer to the Instruction manual of the DVD players for the detailed operating instructions. For the powered subwoofer, you can adjust the volume of the subwoofer using the subwoofers own volume control.
Listening to radio broadcasts
This unit can store up to 40 stations in the memory and recall them by one-touch operation. Radio stations can be classified into RDS (Radio Data System) stations and other stations. To listen to or store RDS stations in the preset memory see <Using RDS (Radio Data System)>.
Using RDS (Radio Data System)
RDS is a system that transmits useful information (in the form of digital data) for FM broadcasts along with the broadcast signal. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions, such as automatic display of the station name. Before using a function utilizing the RDS, be sure to perform the RDS Auto Memory operation by referring to the description in <RDS Auto Memory>.()
Tuning (non-RDS) radio stations
RDS AUTO MEMORY function
MULTI CONTROL INPUT SELECTOR
Automatically selects and stores up to 40 RDS stations in the preset memory. If fewer than 40 RDS stations have been stored in the preset memory, regular FM stations will be stored in the remaining places.
PS (Program Service) Name Display
Automatically displays the station name transmitted by the RDS station.
MULTI CONTROL / BAND TUNER Use [TUNER] to select the tuner. Use [BAND] to select the desired broadcast band.
Each press switches the band as follows: 1 FM 2 AM
PTY (Program TYpe) identification Search
Automatically tunes to a station that is currently broadcasting the specified program type (genre).
RT (Radio Text) function
Displays the radio text data transmitted by some RDS stations when you press [RDS DISP.]. There is "NO RT" or "RT ----" display if no text data is transmitted. The "RDS" indicator lights up when an RDS broadcast (signal) is received.
Note: Some functions and function names may differ for certain countries and areas.
Use [AUTO/MONO] to select the desired tuning method.
Each press switches the tuning method as follows: Selection Auto tuning Manual tuning Operation The next station is tuned automatically. Select a station manually. Indicator "AUTO" lit "AUTO" not lit
Normally, set to "AUTO" (auto tuning). If the radio waves are weak and there is a lot of interference, switch to manual tuning. (With manual tuning, stereo broadcasts will be received in monaural.)
Use [MULTI CONTROL 5/] or [TUNING 1/] to select the station.
"ST." lights when a broadcast is being received in stereo.
RDS Auto Memory
This function automatically stores up to 40 RDS stations in the preset memory. In order to use the PTY function, the RDS stations must be stored in the preset memory using the RDS AUTO MEMORY function.
Presetting radio stations manually
The RDS auto memory function assigns preset numbers to RDS stations starting from preset number "1". Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations. See <RDS Auto Memory>.
MULTI CONTROL /
TUNER Use [TUNER] to select the tuner. Use [BAND] to set the broadcast band to "FM". Press [AUTO MEMORY]. Tune to the station you want to store. Press [MEMORY] while receiving the station.
Proceed to step within 20 seconds. (If more than 20 seconds elapse, press [MEMORY] again.) After a few minutes, up to 40 RDS stations are preset in order from channel "01". Stations already stored in the preset memory may be replaced by RDS stations. (i.e., If the RDS AUTO MEMORY function detects 15 RDS stations, the stations currently preset at numbers 0115 will be replaced by the RDS stations.)
Use [MULTI CONTROL 5/] to select one of the station presets (1 40). Press [MEMORY] again to confirm the setting.
Repeat steps , , , and to store as many stations as necessary. If you store a station at a previously used preset, the previous station will be replaced by the new one.
Receiving preset stations
Receiving preset stations in order (P.CALL)
TUNER Press [TUNER] to select tuner as the source. Enter the number of the preset station you want to receive (up to "40" preset numbers).
Press the Numeric keys in the following order: For "15" : press [+10],  For "20" : press [+10], [+10],  If you make a mistake entering a two digit number, press [+10] repeatedly to return to the original display and start again.
P.CALL / TUNER Press [TUNER] to select tuner as the source. Use [P.CALL 4/] to select the desired station.
Each time you press the key, another preset station is received in order. Holding down the [P.CALL /4], lets you skip through the presets, receiving each preset station at 0.5 second intervals.
Tuning by Program TYpe (PTY search)
This function lets you set the tuner to automatically search for stations which are currently broadcasting the type of program (genre) you want to listen to. Under certain receiving conditions, it may take more than 1 minute to complete the search.
Press [PTY] to start searching.
Example: Searching for a Rock Music broadcast. Display while searching.
Program type name display
Display when a station is received.
Station name display
No sound is heard while "PTY" is blinking. If the desired program type cannot be found, "NO PROG" is displayed, then after several seconds the display returns to the original display.
To select another program type
Repeat steps , and. TUNING /
Using the RDS DISP. (display) key
Execute the RDS auto memory procedure. Set the broadcast band to FM. Tune to an RDS station.
Press [PTY] to activate the PTY search mode. Pressing [RDS DISP.] changes the contents of the display.
Midnight mode (Dolby Digital and DTS mode only)
When watching movies at night, you might not be able to raise the volume as loud as normal. Midnight mode compresses the dynamic range of previously specified heavy sound passage of the Dolby Digital and DTS mode sound track (like scenes with sudden increases in volume) to minimize the difference in volume between the scenes with heavy sound passage and scenes with normal sound passage. This makes it easy to hear all of the sound track, even when listening at low volumes.
Press [SOUND] repeatedly until "NIGHT" appears on the display.
This can be selected only if "CD/DVD", "DVD/6CH" or "VIDEO2" is selected as the source and the listen mode is set to "DOLBY DIGITAL" or "DTS".
*1 The adjustment is only temporary for the current input selection. The value will return automatically to the original setup value when the power is turned on/off or when the input selection is changed. *2 Analog mode only 3 * Dolby Digital and DTS mode only *4 Pro Logic II Music mode only.
Use [MULTI CONTROL 5/] to select the "ON" or "OFF" setting.
Use the [MULTI CONTROL 5/] to adjust the setting as desired.
Some Dolby Digital or DTS software may not be compatible with the Midnight mode.
Panorama mode (Pro Logic II Music mode only)
When listening to music, you will be able to enjoy the "wraparound" sound effect when you adjust the panorama mode.
Center Width mode (Pro Logic II Music mode only)
Center Width adjustment allows you to enjoy an enhanced sound when listening to music through center image from only center speaker, or left and right speakers or various combinations adjustments.
Press [SOUND] repeatedly until "PANORAMA" appears on the display.
The "PANORAMA" setting indication scrolls across the display.
Press [SOUND] repeatedly until "CENTER WIDTH" appears on the display.
The "CENTER WIDTH" indication scrolls across the display.
"PANORAMA" will be scrolled from right to left.
Use [MULTI CONTROL 5/] to adjust the leftcenter-right output.
Center image will be heard from Center speaker only.
1 "ON" : PANORAMA mode is ON. 2 "OFF" : PANORAMA mode is OFF.
Center image will be heard from Left and Right speakers only.
Dimension mode (Pro Logic II Music mode only)
When listening to music with certain recordings, you will also be able to achieve a suitable balance from all the speakers by adjusting the dimension mode.
When in other positions, center image from Center speaker, Left and Right speakers can be heard simultaneously with various combinations. When the center speaker is switched OFF, this mode will not be effective.
Press [SOUND] repeatedly until "DIMENSION" appears on the display.
The "DIMENSION" indication scrolls across the display.
Use [MULTI CONTROL 5/] to adjust the soundfield towards the rear or the front.
Soundfield is adjusted towards the front.
Soundfield is in neutral position.
Soundfield is adjusted towards the rear.
Listening with headphones (main unit only)
Press [SPEAKERS ON/OFF] so that the speaker indicator goes off.
Make sure the "SP" indicator is turned off.
If you turn off all of the speakers when in surround mode, the surround mode will be canceled as well, resulting in stereo playback.
Connect headphones to the PHONES jack.
Display dimmer adjustment
The dimmer function lets you select the brightness of the display and indicators of this unit. You might find this useful if you darken your room to watch movies or listen to music.
The brightness of the display changes among the three available settings. Select the brightness level you find most pleasing.
Use [VOLUME %/] to adjust the volume.
The brightness of the LED indicators changes in 2 levels.
Remote control operations for Kenwood DVD players
The remote control of this unit can control Kenwood DVD players directly without using the remote control supplied with the DVD player. DV-4900, DV-4070B, DV-2070, DV-203, DVF-9010, DVF-K7010, DVF-5010, DVF-R9030, DVF-R7030, DVF-3530, DV-402, DV-5900, DV-5700, DVF-R9050, DVF-J6050, DV-505, DV-503, DV-502, DVF-3550, DVF-3050, DVF-R4050, DVF-605, DV-6050, DVF-R5060, DVF-3060, DVF-3060K, DV-705, DVF-R5070, DVF-3070, DVF-3080, DVF-N7080, DVF-8100, DVF-3200, DVF-3250, DVF-3300, DVF-3400 and DVF-5400.
How to operate the DVD player with the remote control
Press [ DVD] to turn the DVD player on. Press [CD/DVD] or [DVD/6CH] to operate the functions of the DVD player. Press each key for DVD player operation. Refer to the operation manual of the DVD players for the detailed operating instructions. (To return to the receiver operation mode, press other Input source key.)
DVD player operation keys
You can perform these basic operations using the keys described below when connected to Kenwood DVD player.
Dvdr3305 765MB LN-T4053H CT-F2121 Powerbank 4 MD-5653GT FT-1000MP CLX-3160FNG DSL-2640R NRK-ORA-E AC 9004 WF-B1261 Wheel LE40B651t3W KF510 DCR-TRV6E Kawai Q-80 FGX730SC 720C Elite BD461 Ilea 100 Midi Dump Fisheasy 2 Black Photo R265 Pocketbook 30I TX-SA500 TK52001 0 T VGN-SZ61wn-C SPA900 6530G Nikkor Pulsar 590 Optio L20 Df Igps 3 6 37LC4R ST290 KH 2157 Mediaimprerssion N656U T2351 Technical Data DR-MV1sus-dr-mv1 ID-16 FO-780 1315XI Pa3455U Spirit3000 UF-770 HD7546 AQV24nsgn 50PG60 SDW-M12BE PCG-NV309 PSR-292 HM-133 KDC-W6541U X3-02 PD-F27 Express 1897 SV-SD90 SA6025 XEC-1000 T2030 LFC20740ST ECB-8610 NV-GS140EG KX-TG5561 DS10A MW88L-S DCR-TRV16 Ford Kuga KS-3200HT Hazer 1-1-0 GPS-CS1kasp Toolbox 5 AJ3112 KX-TCD202FX LDF6920ST 11471 Price CDX-S2010X 5065R CDX-393 Iaudio X5 DCR-SR68E TK7522 NAD 319 CT-S830S PSR-293 E352DN EXC-F CS5121-3 AW1805Q M3510 DV-HR300U ICD-SX45 MKI9100
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101