Reviews & Opinions
Independent and trusted. Read before buy Kenwood KRF-V6010!

Kenwood KRF-V6010

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Kenwood KRF-V6010 Home Cinema Amplifier, size: 591 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Kenwood KRF-V6010About Kenwood KRF-V6010
Here you can find all about Kenwood KRF-V6010 like manual and other informations. For example: review.

Kenwood KRF-V6010 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Kenwood KRF-V6010 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Kenwood KRF-V6010 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 1. Page 1 of 1. Average Rating:
englte 4:45pm on Thursday, July 8th, 2010 
disc error I received the Kenwood DVF 3080 as a gift in Dec 05. The player was part of a home theater system with Bose speakers and a tuner. Disc error I bought this unit to replace an old CD player which had given up the ghost. Disc error . . . The one we bought has trouble reading discs and we frequently get a disc error message.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

AUDIO VIDEO SURROUND RECEIVER
KRF-V7010 KRF-V6010 KRF-V5010

INSTRUCTION MANUAL

KENWOOD CORPORATION
This instruction manual is for some models. Model availability and features (functions) may differ depending on the country and sales area.
About the supplied remote control (RC-R0507).
Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio/video components. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc.). Using the remote control without completely understanding its design and how to switch the operation modes may result in incorrect operations.
B60-3609-CS MA (T, E2, Q) ID 99/98/2

Remote Control

Operations

Preparation

Getting started
Before applying the power
Units are designed for operation as follows. U.K. and Europe.. AC 230 V only Russia... AC 220 V only
Caution : Read this page carefully to ensure safe operation.
KRF-V7010/V6010/V5010 (En/T)

Unpacking

Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage. We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.

For the United Kingdom

Preparations
Factory fitted moulded mains plug
1. The mains plug contains a fuse. For replacement, use only a 13Amp ASTA-approved (BS1362) fuse. 2. The fuse cover must be refitted when replacing the fuse in the moulded plug. 3. Do not cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer. If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

Accessories

FM indoor antenna (1)

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code: Blue : Neutral Brown : Live Do not connect those leads to the earth terminal of a three-pin plug. AM loop antenna (1) Loop antenna stand (1)
REQUIREMENT BY NEDERLAND GAZETTE
Batteries are supplied with this product. When they empty, you should not throw away. Instead, hand them in as small chemical waste.
For KRF-V7010 Remote control unit (1) RC-R0507

Batteries (R03/AAA) (4)

Safety precautions

WARNING :

TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
For KRF-V6010, KRF-V5010 Batteries (R06/AA) (2) Remote control unit (1) RC-R0307

Cleaning

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
Do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to clean the cabinet. Use a clean dry cloth. Do not use contact cleaners because it could cause a malfunction. Be specially careful against contact cleaners containing oil, for they may deform the plastic components.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED DANGEROUS VOLTAGE WITHIN THE PRODUCTS ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

Contents

Caution : Read the pages marked safe operation. carefully to ensure

This manual is divided in to four sections, Preparations, Operations, Other, and Remote Control. The DSP (Digital Signal Processor) used for this receiver incorporates a variety of high quality adjustable sound fields, like "LIVE" and "HALL", to add the presence associated with an arena, jazz club or stadium (etc.) to the original signal. It is compatible with almost any kind of program source.
Shows you how to connect your audio and video components to the receiver and prepare the surround processor. We've tried to make setting up your system as easy as possible. However, since this receiver works with all of your audio and video components, connecting the system can be fairly complex.

DVD 6-channel input

If you own a DVD player equipped with 6-channel output, this receiver allows you to obtain the full surround sound impact of DVD source material featuring multi-channel encoding. Since the source signals are digital and each channel is input independently, the resulting ambience is far superior to what can be achieved with conventional surround sound systems.
Shows you how to operate the various functions available from the receiver.
Shows you additional information such as In case of difficulty (troubleshooting) and Specifications.
Universal IR (InfraRed) remote control (RC-R0507 only)
In addition to the basic receiver, the remote control supplied with this receiver can also operate almost all of your remote controllable audio and video components. Just follow the simple setup procedure to register the components you have connected.
Remote Control (Separate booklet) (RC-R0507 only)
Includes the Quick Start Guide, which shows you how to operate other components using the remote control, as well as a detailed explanation of all remote control operations. Once you have registered your components with the proper setup codes, youll be able to operate both this receiver and your other AV components (TV, VCR, LD player, CD player, etc.) using the remote control supplied with this receiver.
MACRO play (RC-R0507 only)
The MACRO function lets you perform a series of operations automatically, like turning ON the power of the receiver and connected components, switching the input selectors, and starting playback. (Be sure to register your components before starting the macro set up procedure.
RDS (Radio Data System) tuner
The receiver is equipped with a RDS tuner that provides several convenient tuning functions: RDS Auto Memory, to automatically preset up to 30 RDS stations broadcasting different programs; station name display, to show you the name of the current broadcast station; and PTY search to let you tune stations by program type.
PTY (Program TYpe) search
Lets you tune stations by specifying the type of program you want to hear.

About the STANDBY indicator
This unit has a STANDBY indicator. When the STANDBY indicator is lit, the unit consumes a small amount of power to preserve the memory. This is called STANDBY mode. This mode also lets you turn the power ON using the remote control.

RDS indicator

TUNED indicator MONITOR indicator DSP indicator 3 STEREO indicator STEREO indicator
Remote control unit (RC-R0507)

VIDEO POWER

AUDIO TV
Page references such as RC0 indicate pages in the remote control operation manual (Separate booklet). 1 POWER key @ Use to turn the receiver on and off. Use in combination with the input selector (AUDIO, VIDEO, or TV) keys and SHIFT key to turn various components on and off. 2 MACRO key RC5 Use in combination with the AUDIO, VIDEO, or TV keys to execute a series of commands automatically (MACRO PLAY). 3 VIDEO selector key Selects the video inputs and sets the remote control to operate the component registered at the respective input. 4 Multi control keys RC$ Use to operate the selected component. 5 REC key RC$ Use to operate the selected component. 6 TUNING/SKIP key Use during the setup procedure to specify various settings. Use to operate the tuner or selected component. 7 SUBWOOFER key Use in combination with the VOLUME +/ keys to adjust the volume of the subwoofer.

P. CALL

TUNING/SKIP MUTE

VOLUME

# $ % ^ & *

SUBWOOFER

FUNCTION SHIFT MENU THEME

SETUP FAV

TV/SAT/VID

ALT AUD

REPEAT

RANDOM

DISPLAY
There are some cases in which keys (or knobs) that have the same function on the receiver and on the remote control have different names. In the instructions of this manual, if the names of corresponding keys (or knobs) on the receiver and remote control are different, the name of the remote control key is indicated in parentheses.
8 FUNCTION SHIFT key RC$ Use in combination with the numeric keys to execute alternate commands. 9 Numeric keys RC$ Provide functions identical to those of the original remote control supplied with the component you are controlling. To access the functions printed above the keys, press within 3 seconds of pressing the FUNCTION SHIFT key. Function availability varies for each component. 0 SHIFT key RC5 Use in combination with the AUDIO and VIDEO keys to change the remote control mode without changing the input selector or in combination with the POWER key to turn on and off components programmed into the remote control. ! TV selector key Sets the remote control to operate a TV or cable box. This key does not change the input selector on the receiver.

@ AUDIO selector key Selects the audio inputs and sets the remote control to operate the respective KENWOOD audio component. If you connect audio components from KENWOOD and other makers to the MD/ TAPE or CD jacks, you can set the remote control to operate these components by registering the appropriate setup code at the respective input. # GUIDE key RC% Use to activate the OSD menu functions of registered components. $ VOLUME key % Use to adjust the receiver volume. % MUTE key ^ Use to temporarily mute the sound. ^ SOUND key Use to adjust the sound quality and ambience effects. & LISTEN MODE key Use to select the listening mode. * SETUP key # Use to select the surround sound settings.
Remote control unit (RC-R0307)

TA/NEWS

5 LISTEN MODE key Use to select the listening mode. 6 SOUND key Use to adjust the sound quality and ambience effects. 7 SETUP key # Use to select the surround sound settings. 8 POWER key # Use to switch the power ON/STANDBY when the POWER is turned ON. 9 BASS BOOST key % Use to select the maximum adjustment setting for the low frequency range. 0 SOURCE DIRECT key ^ ! MUTE key ^ Use to temporarily mute the sound. @ MULTI CONTROL key Used to make a variety of settings. # VOLUME CONTROL key

BASS BOOST

VIDEO 1
VIDEO2/MON. DVD/6CH INPUT

MD/TAPE

TUNING

P.CALL

DISC SKIP A/B +100

VOLUME UP

VOLUME DOWN MULTI CONTROL
REMOTE CONTROL UNIT RC-R0307
1 RDS operation key Use to receive RDS broadcasts. 2 Numeric keys If CD or MD is selected as the input source, these keys function as numeric keys. If tuner is selected as the input source, these keys are used to call up station presets. 3 Input selector keys % Use to select the receivers input source. 4 Component operation keys Use these keys to operate other components with system control connections to the receiver. TUNING (1 ) keys & If tuner is selected as the input source, these keys function as tuning keys. If CD or MD is selected as the input source, these keys function as search keys. P.CALL (4 ) keys ( If tuner is selected as the input source, these keys function as P.CALL keys. If CD or MD is selected as the input source, these keys function as skip keys.
2 key If tape is selected as the input source, this key functions as the play key for side B of the cassette (the side facing away from the front of the deck). BAND (6) key & If tuner is selected as the input source, this key functions as the band selector key. If CD is selected as the input source, this key functions as the play/pause key. If MD is selected as the input source, this key functions as the play key. DISC SKIP, A/B, +100 key If CD is selected as the input source, this key functions as the multi-CD player disc skip key. If TAPE is selected as the input source, this key is used to switch between the two decks (A and B) of a double cassette deck. AUTO key & If tuner is selected as the input source, this key functions as the AUTO key. If CD or MD is selected as the input source, this key functions as the stop key.

Connecting the speakers

1 Strip coating. 2 Loosen. 1 Strip coating. 2 Push lever.

3 Insert cord.

4 Return lever.
Front Speakers A Right Left
The KRF-V6010 and KRF-V5010 are equipped with onetouch speaker termiCenter Speaker nals. They are arranged in the same manner as the speaker terminals of the KRF-V7010. Refer to the instructions on making connections to the KRF-V7010 when making connections to the KRF-V6010 or KRF-V5010.
Never short circuit the + and speaker cords. If the left and right speakers are connected inversely or the speaker cords are connected with reversed polarity, the sound will be unnatural with ambiguous acoustic imaging. Be sure to connect the speakers correctly.

Speaker impedance

After confirming the speaker impedance indications printed on the rear panel of the receiver, connect speakers with matching impedance ratings. Using speakers with a rated impedance other than that indicated on the rear panel of the receiver could result in malfunctions or damage to the speakers or receiver.
CENTER FRONT SPEAKERS SPEAKER

PRE OUT connections

This receiver has additional preout jacks. These can be used for various purposes, but will need to be connected to an external power amplifier as shown in the example below.
FRONT SPEAKERS CENTER SPEAKER

KRF-V7010

Except for KRF-V7010

CENTER

CENTER FRONT SPEAKERS

Power amplifier

SUB WOOFER SURROUND
Surround Speakers Powered Subwoofer

PRE OUT

Powered subwoofer
Use the FRONT SPEAKERS B terminals if you want to connect a second front speaker system. (KRF-V5010 is not equipped with SPEAKERS B terminal.)

SURROUND SPEAKERS

Center Speaker Power amplifier
Left Right Surround Speakers (Be sure to connect both surround speakers)
The KRF-V5010 is equipped with a SUBWOOFER terminal only. Connecting a speaker cord directly to a PRE OUT jack will not produce any sound from the speaker. To use the PRE OUT jacks, press the SPEAKERS A key to the on position (the SPEAKERS key in the case of the KRF-V5010).

3 Insert.

4 Secure.

Speaker placement

Preparing the remote control (RC-R0507)

Loading the batteries

1 Remove the cover. Center speaker 2 Insert the batteries.
Subwoofer Front speaker Surround speaker Listening position

3 Close the cover.

Front speakers : Place to the front left and right of the listening position. Front speakers are required for all surround modes. Center speaker : Place front and center. This speaker stabilizes the sound image and helps recreate sound motion. Be sure to connect a center speaker when using the Dolby 3 Stereo mode. Surround speakers : Place to the direct left and right, or slightly behind, the listening position at even heights, approximately 1 meter above the ears of the listeners. These speakers recreate sound motion and atmosphere. Required for surround playback. Subwoofer : Reproduces powerful deep bass sounds. Although the ideal surround system consists of all the speakers listed above, if you don't have a center speaker or a subwoofer, you can divide those signals between the available speakers in the speaker settings to obtain the best possible surround reproduction from the speakers you have available. #

Indication in feet

1 )FT 3.)M

Indication in meters

The allowable setting range is 1 to 30 feet (0.3 to 9.0 m), adjustable in 1 foot (0.3 m) increments. 3 Press the SETUP key. 4 Repeat steps 2 and 3 to input the distance for the surround speaker. 5 Setup is complete when the input indication reappears.
Display when all speakers have been selected. The speakers you selected appear on the display. Confirm that all the speakers have been correctly selected. If you used the remote control (RC-R0507) to perform the settings, press the VIDEO key at this point to turn off the remote controls own adjustment mode. In this case, the input source is not switched.
Speaker indicator lights.
Models other than KRF-V5010

KRF-V5010

Selecting VIDEO 2/MONITOR
Depending on the component connected to the VIDEO 2/MONITOR jacks, select either the VIDEO 2 setting or the MONITOR setting, as appropriate. 8
Listening to a source component
VOLUME CONTROL INPUT SELECTOR

Adjusting the sound

SOURCE DIRECT VOLUME CONTROL BASS BOOST SOUND

AUDIO VIDEO

PHONES MULTI CONTROL SPEAKERS A/B SPEAKERS, MUTE (KRF-V5010)

VIDEO BASS BOOST

VOLUME VOLUME
VOLUME TUNING/SKIP MUTE SOUND

RC-R0307

MUTE VOLUME SOUND MULTI CONTROL

RC-R0507

1 Use the input selector (INPUT SELECTOR (AUDIO, VIDEO))
to select the source you want to listen to.
The input sources change as shown below: Selecting a source using the INPUT SELECTOR knob 7 TUNER "CD" ("CD"*) "TAPE" or "MD" ("TAPE"*) "PHONO"("PHONO"*) "VIDEO1" ("VCR1"*) "VIDEO2" ("VCR2"*) "DVD 6ch"
The following adjustments are possible if the receiver is in the stereo mode. 1 Press the SOUND key to select the tone mode to be adjusted. BASS: Select this to adjust the low frequency range. (Press the SOUND key once.) TREB: Select this to adjust the high frequency range. (Press the SOUND key twice.)
Selecting a source using the AUDIO key on the remote control (RC-R0507) "CD" ("CD"*) "TAPE" or "MD" ("TAPE"*) TUNER "PHONO"("PHONO"*)

2 Enter the number of the preset you want to receive (up to

"30").

Press the numeric keys in the following order: For "15", press.. 0,5 For "20", press.. 0,0,) If you make a mistake entering a two digit number, press the +10 key several times to return to the original display and start again.

MEMORY

1 Tune to the station you want to store. 2 Press the MEMORY key while receiving the station.
Proceed to step 3 within 5 seconds. (If more than 5 seconds elapse, press the MEMORY key again). When storing radio stations manually, it may take a few seconds before the "MEMORY" indicator appears in the display after pressing the MEMORY key depending on receiving conditions. Blinks for 5 seconds
Receiving preset stations in order (P.CALL)
AUDIO P.CALL TUNER P.CALL

Lights for 5 seconds

3 Use the MULTI CONTROL to select one of the station

presets (1 30).

1 Use the remote control to select the tuner as the source.
The remote control switches to the tuner operating mode.
4 Press the MEMORY key to accept the setting.
Repeat steps 1, 2, 3 and 4 to store as many stations as necessary. If you store a station at a previously used preset, the old station will be replaced by the new one.
2 Use the P.CALL key to select the desired station.
Each time you press the key, another preset station is received in order. Pressing the P.CALL (%) key () does the following: 01=02=03=. 28=29=30=01=02=03= Pressing the P.CALL () key (4) does the following: 01+02+03+. 28+29+30+01+02+03+ Holding down the key, lets you skip through the presets, receiving each for 0.5 seconds apiece.
Receiving preset stations

AUDIO 1-0, +10 TUNER

1-0, +10
Tuning by program type (PTY search)
This function lets you set the tuner to automatically search for stations which are currently broadcasting the type of program (genre) you want to listen to. Under certain receiving conditions, it may take more than 1 minute to complete the search. NO PROG is displayed if this operation is attempted before performing the RDS Auto Memory operation.
3 Press the PTY key to start searching.
EXAMPLE: Searching for a Rock Music broadcast. Display while searching Blinks
A B TI.VOL MUTE RDS EON PTY TP TA NEWS
Program type name display

R OCK M

Display when a station is received. Goes out

Station name display

No sound is heard while PTY is blinking. If the desired program type cannot be found, NO PROG is displayed, then after several seconds the display returns to the original display.

Execute the RDS auto memory procedure. Set the broadcast band to FM. Tune to an RDS station.
To select another program type

Repeat steps 1, 2 and 3.

1 Press the PTY key to activate the PTY search mode.
SP A BTI.VOL MUTE RDS EON PTY TP TA NEWS
Reserving the desired information
When the receiver is tuned to a RDS EON station (a station at which the EON indicator lights up), this function lets you set the receiver to automatically switch stations to receive news or traffic programs as they are broadcast. When the broadcast is over, the receiver returns to the original station automatically.

FM AM MHz kHz

AUTO SOUND DIGITAL AUTO S.DIRECT MEMO. PRO LOGIC STEREO MONITOR ST. TUNED DOWNMIX DSP
When an RDS broadcast is received, the program type is shown on the display. If no PTY data is available, or if the station is not an RDS station, NONE is displayed.
2 While the PTY indicator is lit, use the MULTI CONTROL
to select the program type of your choice.
Display POP M ROCK M M.O.R. M LIGHT M CLASSICS OTHER M NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED

Program type table

Program Type Name Pop Music Rock Music *M.O.R. Music Light Classic Music Serious Classic Music Other Music News Current Affairs Information Sport Education Drama Cultures Science Varied Speech Program Type Name Weather Finance Childrens programmes Social affairs Religion Phone in Travel Leisure Jazz music Country Music National Music Oldies Music Folk Music Documentary Display WEATHER FINANCE CHILDREN SOCIAL A RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT
*M.O.R. Music (Middle of the Road Music)
Set the broadcast band to FM.
1 Complete steps 1~3 of "Presetting RDS stations (RDS

AUTO MEMORY)".

When waiting for information while listening to a RDS station without the EON function
If the EON indicator does not light in steps 3 and 4 and the desired kind of information has already been selected, the information from only the station being received will be waited for.
Skip this step if you have already completed the RDS AUTO MEMORY procedure. The EON function will not work if all 30 FM preset stations were stored manually using the procedure shown in Presetting radio stations manually. Be sure to use the RDS automatic memory function.
2 Press the TA/NEWS key to select the information type

VOLUME TUNING/SKIP SUBWOOFER SOUND

Display dimmer adjustent

SOUND MULTI CONRTOL
The dimmer function lets you select the brightness of the receiver's display. You might find this useful if you darken your room to watch movies or listen to music. Each time you hold down the DISPLAY key for more than two seconds, the display brightness changes among the three available settings. Select the brightness level you find most pleasing.
You can make further adjustments to the sound while listening to playback in the surround mode.
1 Press the SOUND key to select the item you want to adjust. Each press switches the selection as listed below. Note that some items are not displayed in certain modes. BASS (low frequency range sound quality adjustment) TREB (high frequency range sound quality adjustment) Cch (center speaker level adjustment) Sch (surround speaker level adjustment) SW (subwoofer level adjustment) INPUT (input level adjustment) % %

V IDEO1 V IDEO1 V IDEO1

The adjustment item for input level is displayed only when the monitor function is activated. 2 Use the MULTI CONTROL (TUNING/SKIP) to adjust the setting as desired. The adjustment item is displayed for approximately eight seconds. If you use the remote control (RC-R0507) to perform the above setting, press the VIDEO key at this point to turn off the remote controls own adjustment mode. In this case, the input source is not switched.
Input level adjustment (when using the monitor function)
If the input level while using the monitor function is too high, adjust the input level as described below. 1 Turn on the monitor function. ^
2 Press the SOUND key several times until the INPUT indication appears. 3 Use the MULTI CONTROL (TUNING/SKIP) to adjust the input level.

I NPUT -3

The adjustment mode is displayed for approximately eight seconds. The input level may be adjusted to any one of two settings: 0 and -6. (The initial setting is 0.) 4 Press the SOUND key to return to the input indication.

In case of difficulty

Resetting the Microcomputer
If the microcomputer may malfunction (unit cannot be operated, or shows an erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor. If this happens, execute the following procedure to reset the microcomputer and return the unit to its normal operating condition.
With the power cord plugged in, turn the POWER key OFF. Then, while holding down the ON/STANDBY key, press POWER.

Please note that resetting the microcomputer will clear the contents of the memory and returns the unit to the state it was in when it left the factory.

Amplifier

Symptom No sound from the speakers. Cause The speaker cords are disconnected. VOLUME is set to the minimum position. MUTE is ON. The SPEAKERS switches are set to OFF. The standby indicator blinks and sound is not output. Sound is not output from one of the speakers. Speaker cords are short-circuited. Remedy Connect them properly referring to Connecting the speakers ! Adjust the volume to a proper level. Turn OFF the MUTE. ^ Set the SPEAKERS switch(es) to ON. $ Turn the power off, eliminate the short-circuiting, then turn on the power again. ! Connect it properly referring to Connecting the speakers. Connect it properly referring to Connecting the speakers. Select a surround mode. Adjust the speaker levels using the test tone. $ Insert the audio cord plugs securely into the PHONO jacks. Connect the grounding wire to the GND terminal on the rear panel.
The speaker cord is disconnected.
Sound is not output from the surround speakers and / or the center speaker, or their sound is very small.
The surround speaker cords and/or the center speaker cord is disconnected. A surround mode has not been engaged. The surround and/or center volume controls are set to the minimum level. The audio cord from the turntable is not connected to the PHONO jacks. The turntable is not grounded.
A humming noise is generated when the PHONO input selector is selected.
Symptom Radio stations cannot be received. Cause No antenna is connected. The broadcast band is not set properly. The frequency of the desired station is not tuned. Noise due to ignition noise from an automobile. Noise due to interference from an electric appliance. Noise due to a nearby TV set. The preset station belongs to a frequency that cannot be received. The preset memory was cleared because the power cord had been unplugged for a long period of time. Remedy Connect an antenna. Set the broadcast band properly. Tune the frequency of the desired station. & Install the outdoor antenna away from the road. Turn off the power to the appliance. Install the receiver farther away from the TV. Preset a station with a receivable frequency. Preset the station again.

Interference.

A station which was preset cannot be received by pressing the corresponding numeric key.

Remote control unit

Symptom Remote control operation is not possible.
Cause Batteries are exhausted. The remote control unit is too far away from the main system, controlling angle is too large, or there is an obstacle between the receiver and the remote. The audio cords and system control cords are not connected properly. No software is loaded in the source component. An attempt is made to play a tape which is being recorded in the cassette deck.
Remedy Replace with new batteries. @# Operate the remote control unit within the controllable range.
Connect properly referring to Setting up the system. 8 Place software in the source component you want to play. Wait until recording has completed.

Memory back up function

Please note that the following items will be deleted from the unit's memory if the power cord is disconnected from the AC outlet or the main power switch is turned off for approximately 3 days. Power mode. Input selector settings. Volume level. Broadcast band. Frequency setting. Preset stations.

Specifications

AUDIO section
Rated power output during STEREO operation KRF-V7010 (DIN) 1 kHz, 0.7% at 4 .. 100 W + 100 W KRF-V6010 (DIN) 1 kHz, 0.7% at 4 .. 90 W + 90 W KRF-V5010 (DIN) 1 kHz, 0.7% at 4 .. 50 W + 50 W Effective power output during SURROUND operation KRF-V7010 FRONT(1kHz, 0.7% T.H.D. at 4 one channel driven)... 100 W + 100 W CENTER (1kHz, 0.7% T.H.D. at 4 one channel driven)... 100 W SURROUND(1kHz, 0.7% T.H.D. at 4 one channel driven)... 100 W + 100 W KRF-V6010 FRONT(1kHz, 0.7% T.H.D. at 4 one channel driven).... 80 W + 80 W CENTER (1kHz, 0.7% T.H.D. at 4 one channel driven).... 80 W SURROUND(1kHz, 0.7% T.H.D. at 4 one channel driven).... 80 W + 80 W KRF-V5010 FRONT(1kHz, 0.7% T.H.D. at 4 one channel driven).... 50 W + 50 W CENTER (1kHz, 0.7% T.H.D. at 4 one channel driven).... 50 W SURROUND(1kHz, 0.7% T.H.D. at 4 one channel driven).... 50 W + 50 W Total harmonic distortion KRF-V7010.. 0.03%(1 kHz, 50W, 4 ) KRF-V6010.. 0.03%(1 kHz, 40W, 4 ) KRF-V5010.. 0.03%(1 kHz, 25W, 4 ) Signal to noise ratio PHONO (MM).. 75 dB (IHF'66) 55 dB (DIN 50mW output) CD... 91 dB (IHF'66) 56 dB (DIN 50mW output) Input sensitivity / impedance PHONO (MM).. 2.5 mV / 27 k CD... 200 mV / 47 k DVD 6CH (SUBWOOFER).. 200 mV / 10 k Output level / impedance TAPE REC.. 200 mV / 1 k PRE OUT (CENTER, SURROUND).. 1 V / 1 k (only KRF-V7010, KRF-V6010) PRE OUT (SUBWOOFER).. 1 V / 600 Tone control BASS.. 10 dB (at 100 Hz) TREBLE... 10 dB (at 10 kHz)

VIDEO section

VIDEO inputs / outputs VIDEO (composite).. 1 Vp-p / 75

FM tuner section

Tuning frequency range U.K. and Europe... 87.5 MHz ~ 108 MHz Russia... 87.5 MHz ~ 108 MHz, 65.0 MHz ~ 74.0 MHz Usable sensitivity (DIN, 75 ) MONO.. 1.2 V / 13.2 dBf (40 kHz DEV., S/N 26 dB) STEREO. 35 V / 42.1 dBf (46 kHz DEV., S/N 46 dB) Total harmonic distortion (DIN, 1 kHz) MONO... 0.2% (65.2 dBf input) STEREO.. 0.8% (65.2 dBf input) Signal to noise ratio (DIN weighted, 1 kHz) U.K. and Europe MONO.. 65 dB (40 kHz DEV., 65.2 dBf input) STEREO.. 60 dB (46 kHz DEV., 65.2 dBf input) Russia MONO.. 63 dB (40 kHz DEV., 65.2 dBf input) STEREO.. 58 dB (46 kHz DEV., 65.2 dBf input) Stereo separation (DIN, 1 kHz).. 36 dB Selectivity (DIN, 300 kHz)... 64 dB Frequency response (30 Hz ~ 15kHz). +0.5 dB, 3.0 dB

AM tuner section

Tuning frequency range.. 531 kHz ~ 1,602 kHz Usable sensitivity (30% mod., S/N 20 dB).. 16 V / (600 V/m) Signal to noise ratio (30% mod., 1 mV input). 50 dB

GENERAL

Power consumption KRF-V7010, KRF-V6010... 280 W KRF-V5010... 210 W AC outlet SWITCHED.. 2 (total 150 W max.) Dimensions... W : 440 mm H : 144 mm KRF-V7010... D : 400 mm KRF-V6010, KRF-V5010.. D : 390 mm Weight (Net) KRF-V7010, KRF-V6010... 8.6 kg KRF-V5010... 8.2 kg
Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product. Model __________________ Serial Number _______________________

 

Tags

EL-6890S Fishfinder 595C M187DN SP-202 ZDF221S VGN-NS10j S IC-R6 32PFL9632D 10 BV9560B 732NW Plus 2 3 Jseblod CCK DSC-T300 Freestyle Lite TS4GMP320-J DTC-690 DTH700 PSR-275-PSR-273 Omron H5CX Hts3440 DAV-X10 MK361 LE37M87BD Micro Sport SD-P1600 Photo EW6507 Alive MC 1033 LQ-1150 CCD-TRV57E DVD-LS50 -5010 Bose 151 Fantom-X8 Review FT-301 CDP-CX450 Cyber-shot CKA5720 OPL-2724 Casio Vivicam 8025 IGO 2441 Dvdr5500-31 UE-46C5100 SUP 015 HS820 TX-SV636 L4S5mg322 DCR-TRV730 MTD 790 MAX-VJ550 5007MG -CB773F-ej- ST 2022 R08 AF 37LG7000 TX1500 B Panel SRT 5010 PSX-1 LE22A457c1C ZDF201 W2242TQ-BF Server CLD-900 DEH-P6850MP NAD T562 T303C RM-AV2100 Eser12psamb IC-A22-E MRP-F256 KX-T7350 DCR-TRV738E 1100 S RTS III Laptop Motorola V750 XT6050 Jet 335 DVR-610 FAV80850S Annexe A TX-SR604 Samsung L77 DSC-P93 Cyber Shot ICF-CD855V 1655 TNT 400-2003 DGX-620 DCR-TRV60E KX-P2123 Mario Bros Imedia 1618 ALU RAD Chef 2200 BSG71370UC

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101