AUDIO VIDEO CONTROL CENTER

KRF-V7200D KRF-V6200D

INSTRUCTION MANUAL

B60-5678-00/00 (E, X) KW

Before applying power
Caution : Read this page carefully to ensure safe operation. Units are designed for operation as follows. Australia...AC 240 V only Europe....AC 230 V only

Unpacking

Unpack the unit carefully and make sure that all the accessories are present. FM indoor antenna (1) AM loop antenna (1)
Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU countries that have adopted separate waste collection systems)
Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment should be recycled at a facility capable of handling these items and their waste by products. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment.
Remote control unit (1) RC-R0732

Batteries (R03) (2)

If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and packing materials in case you need to move or ship the unit in the future. Keep this manual handy for future reference.
Notes on instructions Safety precautions
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN
The operating instructions given in this manual assume that the user mainly operates the receiver using the remote control unit. When the same operation is also available on the main unit, the operating method is indicated in illustrations. The [VOLUME CONTROL], [MULTI CONTROL] and [INPUT SELECTOR] knobs on the main unit are operated by turning the knobs clockwise or counterclockwise.

Example:

Getting into the setup mode
The setup procedure is identical for all of the setting elements. Once you remember the following procedure, you can easily set up other setting elements.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT S E N C LO S U R E T H AT MAY B E O F S U F F I C I E N T MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

SETUP MULTI CONTROL

The knob on the main unit is pointed with an arrow to indicate that it can be turned in either direction. The operating procedures refer to those of the remote control unit. Some SETUP MULTI CONTROL operations are also available using the key / (or knob) of the same name on the main unit.

Remote control operations for Kenwood DVD players. 40 Troubleshooting.. 41 Specifications.. 44
Setting up the system.. 8
Speaker placement...8 Digital connections...9 Connecting a DVD player (6-channel input). 10 Connecting audio components.. 11 Connecting video components.. 12 Connecting video components (COMPONENT VIDEO).. 13 Connecting the speakers (KRF-V7200D).. 14 Connecting the speakers (KRF-V6200D).. 15 Connecting the terminals.. 16 Connecting to the AV AUX jacks and USB jack.. 16 Connecting the antennas.. 17

Special features

PURE AUDIO MODE
This is the mode for enjoying audio sources in high-quality stereo. It shuts off the power to the video circuitry as well as the display to eliminate their influence on the audio circuitry and improve the reproduced audio quality.
USB host for digital audio player
The easily accessible front-mounted USB jack can accept USB mass-storage-class compliant digital audio players or flash memories. Audio files recorded in the USB device can be played, and tag information such as title, artist name and album name can also be displayed.

Speaker settings.. 18

Speaker setup (Easy Setup)... 18 Speaker setting flow... 19 Getting into the setup mode.. 19 Speaker setup ("SP SETUP")... 20 Adjusting the speaker level ("TEST TONE").. 20 Distance setting ("DISTANCE")... 21 Low frequency effects level ("LFE LVL"). 21

True home theater sound

This unit incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software. Select a surround mode according to your equipment or the software you are going to play and enjoy! Dolby Digital Dolby Digital EX Dolby Pro Logic II Dolby Pro Logic IIx DTS DTS-ES Neo:6 DSP surround modes DVD 6-channel input

Normal Playback.. 22

Preparing for playback.. 22 Listening to a source component.. 23 Listening to music with PURE AUDIO MODE. 23
Operation of USB source. 24
Playable USB device and files.. 25
Adjusting the sound.. 26 Ambience effects.. 27
Surround modes.. 27 Surround play.. 30 DVD 6-channel playback... 31
Listening to radio broadcasts.. 32
Tuning (non-RDS) radio stations. 32 Using RDS (Radio Data System).. 32 RDS Auto Memory... 33 Presetting radio stations manually.. 33 Receiving preset stations.. 34 Receiving preset stations in order (P.CALL).. 34 Tuning by program type (PTY search). 35 Using the DISPLAY key.. 35
Names and functions of parts

Main unit

PTY indicator Speaker indicator AUTO indicator Frequency display, Input display, Preset channel display, Surround mode display AUTO DETECT indicator DIGITAL indicator Band indicators DSP MODE indicator RDS indicator 6CH INPUT indicator DTS / DTS-ES indicator DISCRETE 6.1 indicator DOLBY DIGITAL / DOLBY DIGITAL EX indicator PRO LOGIC indicator Neo:6 indicator MATRIX 6.1 indicator

KRF-V6200D

FRONT SURROUND CENTER DVD / 6CH IN SUB WOOFER

KRF-V7200D

CENTER VIDEO2 IN OUT VIDEO1 IN COAXIAL OPTICAL DVD/6CH CD/DVD DIGITAL IN
SUB WOOFER FRONT SURROUND DVD / 6CH IN C

MONITOR OUT

MONITOR DVD OUT IN VIDEO

FRONT OUT L/R

SURROUND OUT L/R

SUBWOOFER OUT

CENTER OUT COAXIAL DIGITAL OUT (AUDIO)

DVD player

VIDEO OUT (Yellow RCA pin cord)
Note: If the DVD player has COMPONENT VIDEO OUT, COMPONENT VIDEO connection is possible. (<Connecting video components (COMPONENT VIDEO)> #)
Connecting audio components

CD/DVD

REC OUT PLAY IN REC OUT PLAY IN MD / TAPE VIDEO 1 AUDIO
OUT Cassette deck or MD player IN

OUT CD or DVD player

Other component
Connecting video components

About the S-VIDEO jacks

If you use the S-VIDEO jacks to connect your video components, be sure to connect your monitor and video recording components also with S-VIDEO jacks.

DVD IN

VIDEO 2 MONITOR IN OUT

S-VIDEO

VIDEO2 IN

VIDEO1 OUT

VIDEO1 IN
REC OUT PLAY IN REC OUT PLAY IN PLAY IN MD / TAPE VIDEO 1 VIDEO 2 AUDIO

AUDIO OUT

VIDEO OUT

AUDIO OUT AUDIO IN

Video component with recording function
VIDEO OUT VIDEO IN VIDEO IN

Monitor TV

Note: A video component with digital audio outputs should be connected to the VIDEO 2 jacks.
Connecting video components (COMPONENT VIDEO)

Y VIDEO2 IN MONITOR OUT

COMPONENT VIDEO

AUDIO OUT*

VIDEO OUT VIDEO IN
Video component VIDEO OUT
Notes: * If the DVD player has 6 channel output, connecting to DVD/6CH IN jacks is possible. (<Connecting a DVD player (6-channel input)> 0) If some of the video equipment are connected to the COMPONENT jacks and the rest are connected to the normal (composite) VIDEO jacks, make sure to connect the TV to the MONITOR OUT jacks of both COMPONENT VIDEO and VIDEO. Depending on the type of TV, it may be necessary to switch the input of the TV according to the type of video input (COMPONENT input or COMPOSITE input). Refer to the instruction manual of your TV for more information.

12m2 SMALL

24m2 MEDIUM

35m2 LARGE

Press [EASY SETUP].

Speaker setting flow

The detailed settings below allow you to enjoy full performance of the receiver according to the environment of your listening room. Speaker settings consist of 4 elements.
Speaker Setup ("SP SETUP") )
Select whether each speaker channel is used or, if used, its size. The Easy Setup function also allows you to make speaker settings easier. See <Speaker setup (Easy Setup)> *
Test Tone ("TEST TONE") )
Select the output level from each speaker.

SETUP MULTI CONTROL /

Distance ("DISTANCE")
Select the distance between each speaker and the listening position.
Low Frequency Effects Level ("LFE LVL")
Select the level of bass audio enhancement. Low Frequency Effect channel delivers separate non-directional bass signals to the subwoofer for more dynamic deep bass sound effects.
Speaker settings completed!

To exit the setup mode

Select "EXIT" in the step and press [SETUP].
Speaker setup ("SP SETUP")
This sets up the speakers according to the speaker system in use. Speaker setup is required every time the speaker system is changed.
If "SURR OFF" is selected, no surround back speaker can be selected. "BS LRG" cannot be selected unless "SURR LRG" is selected. If "BS MONO" is selected, surround back signal can only be output at the SURROUND BACK L terminal.
See <Getting into the setup mode> (() and select "SP SETUP". Use [MULTI CONTROL 5/] to select the subwoofer setting.
Speaker Subwoofer Display "SUBW ON" "SUBW OFF" Selection With Subwoofer Without Subwoofer
Adjusting the speaker level ("TEST TONE")
From your usual listening position, adjust the volume output of each speaker. The output level from each speaker should be the same.
See <Getting into the setup mode> (() and select "TEST TONE". Use [MULTI CONTROL 5/] to select either "AUTO" or "MANUAL".
Press [SETUP]. Repeat steps for the rest of the speaker setting.
Speaker Front speaker Display "FRNT LRG" "FRNT NML" "CNTR NML" Center speaker "CNTR LRG" "CNTR OFF" "SURR NML" Surround speaker "SURR LRG" "SURR OFF" "BS LRG" "BS NML" Surround Back speaker "BS OFF" "BS L/R"*1 "BS MONO"*1 Subwoofer remix*2 "RMX ON" "RMX OFF" Selection Large size front speaker Average size front speaker Average size center speaker Large size center speaker No center speaker is connected. Average size surround speaker Large size surround speaker No surround speaker is connected. Large size surround back speaker Average size surround back speaker No surround back speaker is connected. Left and Right Surround Back speakers are connected. Only one Surround Back speaker is connected. Subwoofer re-mix is on. Subwoofer re-mix is off.

Select this setting to play the DVD player connected to DVD/6CH IN jacks.
Analog input ("ANALOG"):

SPEAKERS B

Select this setting to play analog signals from a cassette deck, VCR, or record player. Note: If [INPUT MODE] is pressed too quickly, sound may not be produced. Press [INPUT MODE] again.
Notes: Set Speakers to OFF for stereo playback. When Speakers is set to ON again, the listen mode remains in stereo if the input signal is digital. When the input mode is "6CH INPT", SPEAKERS B cannot be selected.
Listening to a source component
Listening to music with PURE AUDIO MODE
The PURE AUDIO MODE allows you to enjoy music sources in high-quality stereo.

VOLUME

Input source keys Select the music source you want to listen to. Select the source you want to listen to. When using the remote control unit:
Use the Input source keys to select a source. The following input source keys are prepared on the remote control unit: [TUNER] (FM/AM broadcast reception) [CD/DVD] [MD/TAPE] [VIDEO1] [VIDEO2] [DVD/6CH] [AUX] [AV AUX] [USB]
Start playback from the selected source. Press [PURE AUDIO MODE].
While in PURE AUDIO MODE, the listen mode is set to stereo. PURE AUDIO MODE indicator lights up, the display will be turned off, and no video signal is output to the TV monitor.
No video signal to the TV monitor. PURE AUDIO MODE indicator lights up. The display is turned off.
When using the main unit:
Use [INPUT SELECTOR] to select a source. The input sources change as shown below with [INPUT SELECTOR]: 1 Tuner (FM/AM broadcast reception) 2 "CD/DVD" 3 "MD/TAPE" 4 "VIDEO1" 5 "VIDEO2" 6 "DVD/6CH" 7 "AUX" Use [USB/AV AUX] to select USB or AV AUX source. 1 "USB" 2 "AV AUX"

To cancel

Press [PURE AUDIO MODE] again.
PURE AUDIO MODE is also canceled when listen mode is changed. See <Surround play>. Notes: When the input mode is "6CH INPT", the listen mode does not change. (<Selecting the input mode> ) When the PURE AUDIO MODE is canceled, the listen mode remains in stereo if the input signal is digital.
Start playback from the selected source. Use [VOLUME %/] to adjust the volume.

Operation of USB source

Audio files such as MP3 files, WMA files and AAC files can be enjoyed through a USB device. For the information on usable USB devices and audio files, see <Playable USB device and files>
Fast forward and backward (remote control only)
Press [] for fast forward. Press [1] for fast backward.
Keep pressing the key until you reach the desired point. Play starts when the key is released. The display shows the play time.

File skip

Press [4] or [].
The display shows the file number and then changes to the play time. If [4] is pressed while playing, the play start from the beginning of the currently playing file.

Press [BASS BOOST] again.
Muting the sound (remote control only)
Press [MUTE] to mute the sound of the speakers.
"MUTE" indicator blinks.
Adjusting the Tone (remote control only)
You can adjust the sound quality when this unit is in the PCM stereo and analog stereo mode.
Press [MUTE] again so that the "MUTE" indicator goes off.
MUTE can also be deactivated by adjusting volume.
Press [TONE] to select the Tone mode. Use [MULTI CONTROL 5/] to select "TONE ON" or "TONE OFF".

ACTIVE EQ mode

You can enjoy a more impressive sound effect when ACTIVE EQ is turned ON during Dolby Digital and DTS playback and, when in PCM and analog stereo mode.
When in "TONE ON" selection, press [TONE] for the following displays.
Display "BASS" "TREB" Setting Adjusts low frequency range. Adjusts high frequency range. Range -10 +10 (in 2 step) -10 +10 (in 2 step)
Press [ACTIVE EQ] for the following selections.
Display "ACTIVE EQ MUSIC" "ACTIVE EQ CINEMA" "ACTIVE EQ GAME" "ACTIVE EQ OFF" Setting Effective when listening to music. Effective when watching a movie. Effective when playing a game. Active EQ function is off.
Use [MULTI CONTROL 5/] to adjust the sound quality.
ACTIVE EQ function will not be available when REC MODE, AUTO TUNING or PRESET MEMORY is ON and during 96kHz LPCM playback.
ACTIVE EQ indicator lights up.
When the ACTIVE EQ mode is set to ON, set it to OFF and then control the TONE setting.

Press [TONE].

Ambience effects

Surround modes

This unit is equipped with listen modes that allow you to enjoy an enhanced sonic ambience with a variety of video sources. In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand. See <Speaker settings> *.
The below speaker placements are for 7.1 channel surround sound system which are;
Dolby Pro Logic IIx Neo:6
The below speaker placements are for 5.1 channel surround sound system which are;
Dolby Digital Dolby Pro Logic II DTS DSP mode DVD 6-channel
The below speaker placements are for 6.1 channel surround sound system which are;
Dolby Digital EX DTS-ES Neo:6
L: SW : C: R: LS : RS : BS : LB : RB :
Front Left speaker Subwoofer Center speaker Front Right speaker Surround Left speaker Surround Right speaker Surround Back speaker Surround Back Left speaker Surround Back Right speaker
Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories.
"DTS", "DTS-ES" and "Neo:6" are registered trademarks of DTS, Inc.

Dolby Digital

Dolby Digital is a highly sophisticated and versatile audio encoding/decoding technology. Dolby Digital technology can transmit mono, stereo (two-channel), or up to 5.1-channel surround sound (discrete* multichannel audio). In 5.1-channel surround sound, the three front channels (Left/Center/Right) deliver crisp, clean dialogue and accurate placement of on-screen sounds, while twin surround channels (Left Surround/Right Surround) wrap around the audience and immerse them in the action. The LFE (Low-Frequency Effects) channel delivers real impact for explosions and other effects that can, literally, be felt as well as heard. The superior coding efficiency of Dolby Digital-and its ability to deliver high-quality discrete multichannel audio without compromising video quality has made it the designated audio standard for DVD worldwide. * The sound information contained in each of the six available channels is distinct and independent. These six channels are described as a "5.1-channel" system, because there are five full-bandwidth channels with 3 Hz to 20 kHz frequency range for Front Left and Right, Center, and Surround, plus one "Low Frequency Effects" (LFE) subwoofer channel devoted to frequencies from 3 to 120 Hz.

Dolby Pro Logic IIx

Dolby Pro Logic IIx transforms any stereo or 5.1-channel signal into six- or seven-channel, full range surround sound, creating a seamless, natural surround soundfield that immerses you in the entertainment experience. Three listening modes, Movie, Music or Game allow you to tailor the audio to meet the different needs of the programming. In Game mode, for instance, special effects signals are routed to the surround channels for fuller, dramatic impact. Music mode features three additional use controls: Dolby Center Width adjusts the balance of the main vocals in the center and front channels. Dolby Panorama creates a seamless, wraparound surround effect. Dolby Dimension lets you set a deeper or shallower surround soundfield.
DTS Digital Surround is the standard for providing 5.1 channels of discrete digital audio in consumer electronics products and software content. DTS can contain a larger volume of data than Dolby Digital, and can reproduce high quality surround sound. They are the same as the Dolby Digital 5.1 channels, but it is a format that lowered the audio compression rate when recording digitally. Because of that, rich sound with high S/N can be reproduced. Moreover, an exact, magnificent surround sound with wide dynamic range and excelling in separation is a feature of DTS. DTS has a ".1" or LFE channel. The indication "LFE" appears in the display when a signal is being input for this channel.

This unit is compatible with the 96kHz LPCM playback. To play a 96kHz DVD, set the listen mode to "STEREO". In "F-AUTO" input mode, the listen mode will automatically be STEREO. When in "D-MANUAL" input mode (listen mode is not STEREO), "FS 96kHz" will appear in the display and no sound can be heard from the speakers. Press [LISTEN MODE] (the listen mode changes to the "STEREO" mode) to output sound from the speakers.
Connect your DVD player to the DVD/6CH INPUT jacks of this unit. Turn on all other components that will be used. Complete <Speaker settings>.
Select "DVD/6CH" as the input source. Press [INPUT MODE] to select "6CH INPT". Start playback of a DVD disc. Adjust the volume.
Notes: It is not possible to adjust the speaker level or sound effect ([SETUP], [SOUND], [LISTEN MODE], [ACTIVE EQ] and [TONE] will not be functional) of the channels separately when this unit is in the 6CH INPUT mode. Adjust the speaker level with the controls of the DVD player. Refer to the Instruction manual of the DVD players for the detailed operating instructions. For the powered subwoofer, you can adjust the volume of the subwoofer using the subwoofers own volume control.
Listening to radio broadcasts
This unit can store up to 40 stations in the memory and recall them by one-touch operation. Radio stations can be classified into RDS (Radio Data System) stations and other stations. To listen to or store RDS stations in the preset memory see <Using RDS (Radio Data System)>.
Using RDS (Radio Data System)
RDS is a system that transmits useful information (in the form of digital data) for FM broadcasts along with the broadcast signal. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions, such as automatic display of the station name. Before using a function utilizing the RDS, be sure to perform the RDS Auto Memory operation by referring to the description in <RDS Auto Memory>.()
Tuning (non-RDS) radio stations

BAND AUTO/MONO

RDS functions:

RDS AUTO MEMORY function

MULTI CONTROL INPUT SELECTOR

After a few minutes, up to 40 RDS stations are preset in order from channel "01". Stations already stored in the preset memory may be replaced by RDS stations. (i.e., If the RDS AUTO MEMORY function detects 15 RDS stations, the stations currently preset at numbers 0115 will be replaced by the RDS stations.)
Proceed to step within 20 seconds. (If more than 20 seconds elapse, press [MEMORY] again.)
Use [MULTI CONTROL 5/] to select one of the station presets (1 40). Press [MEMORY] again to confirm the setting.
Repeat steps , , , and to store as many stations as necessary. If you store a station at a previously used preset, the previous station will be replaced by the new one.
Receiving preset stations
Receiving preset stations in order (P.CALL)

Numeric keys

TUNER Press [TUNER] to select tuner as the source. Enter the number of the preset station you want to receive (up to "40" preset numbers).
Press the Numeric keys in the following order: For "15" : press [+10], [5] For "20" : press [+10], [+10], [0] If you make a mistake entering a two digit number, press [+10] repeatedly to return to the original display and start again.
P.CALL / TUNER Press [TUNER] to select tuner as the source. Use [P.CALL 4/] to select the desired station.
Each time you press the key, another preset station is received in order. Holding down the [P.CALL 4/], lets you skip through the presets, receiving each preset station at 0.5 second intervals.

Preset number

Tuning by program type (PTY search)
This function lets you set the tuner to automatically search for stations which are currently broadcasting the type of program (genre) you want to listen to. Under certain receiving conditions, it may take more than 1 minute to complete the search.
Press [PTY] to start searching.
Example: Searching for a Rock Music broadcast. Display while searching.

Blinks

Program type name display
Display when a station is received.

Goes out

Station name display
No sound is heard while "PTY" is blinking. If the desired program type cannot be found, "NO PROG" is displayed, then after several seconds the display returns to the original display.
To select another program type
Repeat steps , and. TUNING /

Using the DISPLAY key

Execute the RDS auto memory procedure. Set the broadcast band to FM. Tune to an RDS station.
DISPLAY Pressing [DISPLAY] changes the contents of the display.
Each press switches the display mode as follows: 1 PS (Program Service) name display 2 RT (Radio Text) display 3 Frequency display 1 PS (Program Service) name display: The station name is displayed automatically when an RDS broadcast is received. If no PS data was sent, "NO PS" is displayed.
Press [PTY] to activate the PTY search mode.
When an RDS broadcast is received, the program type is shown on the display. If no PTY data is available, or if the station is not an RDS station, "NONE" is displayed.
While the "PTY" indicator is lit, use [MULTI CONTROL 5/] or [TUNING 1/] to select the program type of your choice.
Program type Pop Music Rock Music Easy Music Light Classical Music Serious Classical Music Other Music News Current Affairs Information Sport Education Drama Culture Science Varied Speech Display "POP M" "ROCK M" "EASY M" "LIGHT M" "CLASSICS" "OTHER M" "NEWS" "AFFAIRS" "INFO" "SPORT" "EDUCATE" "DRAMA" "CULTURE" "SCIENCE" "VARIED" Program type Weather Finance Children's Program Social Affairs Religion Phone In Travel Leisure Jazz Music Country Music National Music Oldies Music Folk Music Documentary Display "WEATHER" "FINANCE" "CHILDREN" "SOCIAL" "RELIGION" "PHONE IN" "TRAVEL" "LEISURE" "JAZZ" "COUNTRY" "NATION M" "OLDIES" "FOLK M" "DOCUMENT"
2 RT (Radio Text) display: Text data accompanying the RDS broadcast scrolls across the display. "NO RT" or "RT----" is displayed if the current RDS station does not provide RT data.

Press [SOUND] repeatedly until the speaker to be adjusted appears on the display. ("C", "RS", "RB", "BS", LB", "LS", or "SW")
Use the [MULTI CONTROL 5/] to adjust the level.
Input level adjustment (analog sources only)

SOUND MULTI CONTROL /

If the input level of an analog source signal is too high, the CLIP indicator will blink to indicate. Adjust the input level.
Press [SOUND] repeatedly until "INPUT" appears on the display. Use the [MULTI CONTROL 5/] to adjust the level. Press [SOUND] until the desired item appears on the display.
Each time you press the key, the menu changes as follows. Note that some items are not displayed depending on speaker settings and listen mode. Display "C" "RS" "RB"* "BS"* "LB"* "LS" "SW" "INPUT" "NIGHT" "PANORAMA" "DIMENSION" "CENTER WIDTH" Adjustment Center speaker level Surround right speaker level Surround Back right speaker level Surround Back speaker level Surround Back left speaker level Surround left speaker level Subwoofer level Input level Midnight mode Panorama mode Dimension Center width Range -10 +10dB -10 +10dB -10 +10dB -10 +10dB -10 +10dB -10 +10dB -10 +10dB -6, -3, 0 "ON", "OFF" "ON", "OFF" *4 *2 *

Remark

Midnight mode (Dolby Digital and DTS mode only)
When watching movies at night, you might not be able to raise the volume as loud as normal. Midnight mode compresses the dynamic range of previously specified heavy sound passage of the Dolby Digital and DTS mode sound track (like scenes with sudden increases in volume) to minimize the difference in volume between the scenes with heavy sound passage and scenes with normal sound passage. This makes it easy to hear all of the sound track, even when listening at low volumes.
Press [SOUND] repeatedly until "NIGHT" appears on the display.
This can be selected only if "CD/DVD", "DVD/6CH" or "VIDEO2" is selected as the source and the listen mode is set to "DOLBY DIGITAL" or "DTS".
Input source name Exit the adjustment mode. * "RB" and "LB" can be selected when "BS L/R" is selected in the speaker setup. "BS" can be selected when "BS MONO" is selected in the speaker setup. *1 The adjustment is only temporary for the current input selection. The value will return automatically to the original setup value when the power is turned on/off or when the input selection is changed. *2 Analog mode only *3 Dolby Digital and DTS mode only *4 Pro Logic II Music mode and Pro Logic IIx Music mode only

VOLUME /

PHONES
Display dimmer adjustment
The dimmer function lets you select the brightness of the display and indicators of this unit. You might find this useful if you darken your room to watch movies or listen to music.

Press [DIMMER].

The brightness of the display changes among the three available settings. Select the brightness level you find most pleasing.
Use [VOLUME %/] to adjust the volume.
The brightness of the LED indicators changes in 2 levels.
Remote control operations for Kenwood DVD players
The remote control of this unit can control Kenwood DVD players directly without using the remote control supplied with the DVD player. DV-4900, DV-4070B, DV-2070, DV-203, DVF-9010, DVF-K7010, DVF-5010, DVF-R9030, DVF-R7030, DVF-3530, DV-402, DV-5900, DV-5700, DVF-R9050, DVF-J6050, DV-505, DV-503, DV-502, DVF-3550, DVF-3050, DVF-R4050, DVF-605, DV-6050, DVF-R5060, DVF-3060, DVF-3060K, DV-705, DVF-R5070, DVF-3070, DVF-3080, DVF-N7080, DVF-8100, DVF-3200, DVF-3250, DVF-3300, DVF-3400 and DVF-5400.
How to operate the DVD player with the remote control
Press [ DVD] to turn the DVD player on. Press [CD/DVD] or [DVD/6CH] to operate the functions of the DVD player. Press each key for DVD player operation. Refer to the operation manual of the DVD players for the detailed operating instructions. (To return to the receiver operation mode, press other Input source key.)
DVD player operation keys
You can perform these basic operations using the keys described below when connected to Kenwood DVD player.

REPEAT

AUDIO SUBTITLE DIMMER ACTIVE EQ

AUDIO SUBTITLE

TOP MENU
ENTER (Cursor (Cursor (Cursor (Cursor ) ) ) )

RETURN BAND ENTER

RETURN (Pause) ( Play) (Stop) (Skip) (Skip)

(Search) (Search)

FOLDER

Troubleshooting

Troubles are not always due to malfunction or failure of the system. In case of a trouble, check the following tables before calling for service.

Amplifier Symptom

No sound from the speakers.
The speaker cords are disconnected. VOLUME is set to the minimum position. MUTE is ON. The SPEAKERS switches are set to OFF.

Remedy

Connect it properly referring to <Connecting the speakers>. $% Adjust the volume to a proper level. Turn OFF the MUTE. Set the SPEAKERS switch to ON. Turn the power off, eliminate the short-circuiting, then turn on the power again. If the standby indicator still blinks after eliminating the short-circuiting, there may be an internal defect. Switch it off, unplug the power cord and call for service. Remove the USB device and turn on the power again. Connect it properly referring to <Connecting the speakers>. $% Set it up properly referring to <Speaker settings>. * Connect it properly referring to <Connecting the speakers>. $% Set it up properly referring to <Speaker settings>. * Select a surround mode. Adjust the speaker levels using the test tone. ) Set the input mode to digital manual before starting playback of the Dolby Digital source. Press the [INPUT MODE] key to select to full auto mode. Copy-guarded video software cannot be recorded. Turn off the PURE AUDIO MODE. While the PURE AUDIO MODE is on, the display is turned off.

KRF-V7200D KRF-V6200D

KENWOOD

B60-5678-00/00 (E, X) KW

: . : ... 240 ... 230

, , -.

FM (1) (1)

(1) RC-R0732

(R03) (2)
- , . , -. KENWOOD . .

: , .

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
, . , . [VOLUME CONTROL], [MULTI CONTROL] [INPUT SELECTOR] .
Getting into the setup mode
The setup procedure is identical for all of the setting elements. Once you remember the following procedure, you can easily set up other setting elements.
: , ( ). , . . , , , . .

SETUP MULTI CONTROL

, , . SETUP. MULTI CONTROL / .
Press [SETUP] to enter the setup mode. Use [MULTI CONTROL 5/] to select the element to setup.
Display "SP SETUP" "TEST TONE" "DISTANCE" "LFE LVL" "EXIT" Selection Speaker setup Test tone Distance Low frequency effects level Exit the setup mode.
Press [SETUP] to get into the setup mode of the selected element.

, , ( ).

: .
. , . 1. - . , . . 2. - , ,. . 3. - , , ., . 4. - , , , . . . , , , KENWOOD. -. ( .), . , . 5. - , . . , . 10 . , , .,. , . , , . 6. - , . , , KENWOOD . 7. - - ( ). . , . , , . . 8. - , . . . 9. - , , . - . 10. - , ,. . 11. - ,. . . 12. - . KENWOOD. 13. , - . a) . b) . ) . d) . , . . e) . f) . 14. - , , , -, . , . 15. - , , . 16. - . 17. - , , , . 18. - . . . 19. - , , .
: 1. 7 , . 2. 19 UL .

: , .

... 2
... 2 ... 2 .. 2 ... 4 .. 5 . 6 . 7 .. 8 .. 9 DVD- (6- ).. 10 .. 11 .. 12 (COMPONENT VIDEO).. 13 (KRF-V7200D). 14 (KRF-V6200D). 15 .. 16 AV AUX USB. 16 .. 17 (Easy Setup - ). 18 .. 19 .. 19 (SP SETUP). 20 (TEST TONE).. 20 (DISTANCE).. 21 (LFE LVL). 21 .. 22 . 23 PURE AUDIO MODE.. 23
(P.CALL)... 34 (PTY). 35 DISPLAY.. 35

... 36

( ).. 36 ( ). 36 .. 36 .. 37 .. 39

.. 3 .. 5

.. 39 DVD- Kenwood .. 40 .. 41 .. 44

PURE AUDIO MODE -.23

. PURE AUDIO MODE , , .

.. 18

USB -.24
USB, , mass-storage -. , USB-, , .

-.27

, . ! - Dolby Digital - Dolby Digital EX - Dolby Pro Logic II - Dolby Pro Logic IIx - DTS - DTS-ES - Neo:6 - DSP - 6- DVD

.. 22

USB-.. 24
USB- .. 25 .. 26 .. 27 .. 27 . 30 6- DVD-. 31 . 32 .. 32 RDS. 32 RDS (RDS Auto Memory). 33 .. 33 . 34
PTY AUTO RDS CLIP MUTE TONE TUNED ST. DOLBY DIGITAL/ DOLBY DIGITAL EX Neo:6 , , AUTO DETECT DIGITAL DSP MODE
6CH INPUT DTS/DTS-ES DISCRETE 6.1 MATRIX 6.1

PRO LOGIC

VOLUME CONTROL

DOLBY DIGITAL

ACTIVE EQ

SPEAKRS B

PURE AUDIO MODE

SPEAKERS A/B/OFF

MULTI CONTROL
INPUT SELECTOR PURE AUDIO MODE

USB/AV AUX

LISTEN MODE PHONES
AUTO/MONO ACTIVE EQ INPUT MODE VIDEO L-AUDIO-R USB

(1) / . , . (2) DOLBY DIGITAL , Dolby Digital. DTS , DTS. ACTIVE EQ , ACTIVE EQ. SPEAKERS B , , SPEAKER B. (3) (4) VOLUME CONTROL (5) PHONES . (6) SPEAKERS A/B/OFF / . (7) LISTEN MODE .
(8) SETUP . (9) MULTI CONTROL . I<</>>I () USB- /. . (10) BAND . >/II / USB-. (11) AUTO/MONO . USB-. (12) ACTIVE EQ ACTIVE EQ. (13) INPUT MODE , .
(14) INPUT SELECTOR . (15) PURE AUDIO MODE PURE AUDIO MODE PURE AUDIO MODE. , PURE AUDIO MODE. (16) USB/AV AUX USB AV AUX. (17) AV AUX , , . (18) USB USB-, , .
STANDBY, . . . 5
(5) . DVD- Kenwood. * FIRST FILE USB-, , USB-. (6) LISTEN MODE . (7) PURE AUDIO MODE PURE AUDIO MODE. (8) ENTER TOP MENU MENU RETURN ON SCREEN DVD-*. (9) II DVD- Kenwood. * BAND . >/II / USB-. DVD- Kenwood. * AUTO/MONO . USB-. DVD- Kenwood. * (10) P.CALL I<</>>I . () USB- /. DVD- Kenwood. * (11) (). (12) AUTO MEMORY FM RDS. (13) MEMORY . (14) RECEIVER /. DVD / DVD-. (15) ACTIVE EQ ACTIVE EQ. (16) DIMMER . (17) BASS BOOST . (18) TONE . (19) SOUND . (20) SETUP . (21) EASY SETUP . (22) MULTI CONTROL / . (23) VOLUME . (24) MUTE .

REPEAT

RECEIVER

SUBTITLE

DIMMER

FIRST FILE

BASS BOOST

EASY SETUP

LISTEN MODE

TOP MENU

RETURN BAND

ON SCREEN

CD/DVD

MD/TAPE

AV AUX

VIDEO 1

VIDEO 2

DVD/6CH

DISPLAY TIME DISPLAY PREV.

AUTO MEMORY MEMORY

FOLDER NEXT
(1) ANGLE DVD- Kenwood. * (2) REPEAT DVD- Kenwood. * (3) AUDIO DVD- Kenwood. * (4) SUBTITLE DVD- Kenwood. * 6
(25) TUNING <</>> / USB-. . DVD- Kenwood. *. (26) DISPLAY USB-. RDS. TIME DISPLAY , USB, . (27) FOLDER PREV. USB-. FOLDER NEXT USB-. (28) PTY . : - * DVD- < DVD- Kenwood > .40.

, [RECEIVER] . , .

(.)
- 1. : 1. . . 2. , . 3. , . , .

- R03, . [3] .

, . . , . 1. . . 2. , , . , . 3. , , .
, RCA. . , . : - - . , .

(6.1ch)

, , , < > -.41.

(7.1ch)

. , .

, , . , , .

. , .

. , .

. - , , : - 10 , - 10. - . , , . .
, . (. , , ).
. 6.1- . 7.1- . : - , , , .
DIGITAL IN DTS, Dolby Digital . , DTS, Dolby Digital PCM (CD) . , , < > -.22.
COAXIAL DVD / 6CH OPTICAL CD/DVD DIGITAL IN OPTICAL VIDEO2

, , .

COAXIAL DIGITAL OUT (AUDIO)

- DVD-

DTS, Dolby Digital PCM
OPTICAL DIGITAL OUT (AUDIO)
: - * VIDEO 2. (. < > .12).

DVD- (6- )

DVD- < >.22.

KRF-V6200D

FRONT SURROUND CENTER DVD / 6CH IN SUB WOOFER

KRF-V7200D

CENTER VIDEO2 IN OUT VIDEO1 IN COAXIAL OPTICAL DVD/6CH CD/DVD DIGITAL IN
SUB WOOFER FRONT SURROUND DVD / 6CH IN C

MONITOR OUT

MONITOR DVD OUT IN VIDEO

FRONT OUT L/R

SURROUND OUT L/R

SUBWOOFER OUT

CENTER OUT COAXIAL DIGITAL OUT (AUDIO)

( RCA)

VIDEO OUT
: - * DVD- , (. < (COMPONENT VIDEO)> -.13). 10
REC OUT PLAY IN REC OUT PLAY IN MD / TAPE VIDEO 1 AUDIO

OUT IN

S-VIDEO

S-VIDEO, S-VIDEO.

DVD IN

VIDEO 2 MONITOR IN OUT

S-VIDEO

VIDEO2 IN

VIDEO1 OUT

VIDEO1 IN

REC OUT PLAY IN REC OUT PLAY IN PLAY IN MD / TAPE VIDEO 1 VIDEO 2 AUDIO

AUDIO OUT

AUDIO OUT AUDIO IN
VIDEO OUT VIDEO IN VIDEO IN

: - VIDEO2. 12

(COMPONENT VIDEO)

Y VIDEO2 IN MONITOR OUT

COMPONENT VIDEO

AUDIO OUT*

VIDEO OUT VIDEO IN

AUDIO OUT VIDEO OUT

: - * DVD- 6- , DVD/6 CH. (. < DVD- (6- )> .10. - COMPONENT, () VIDEO, MONITOR OUT COMPONENT VIDEO VIDEO. - ( : COMPONENT ). . 13

(KRF-V7200D)

SUB WOOFER PRE OUT
6.1- . BS MONO -.20.

FRONT SPEAKERS (6-16 )

SURROUND SPEAKERS (6-16 )
+ R RED L WHITE SPEAKER B R L SPEAKER A
+ R GREEN CENTER L R L GRAY BLUE SURROUND TAN BROWN SURROUND BACK
: - , , . , , , . 14

(KRF-V6200D)

6.1- ( ). BS MONO.20.
SURROUND SUB WOOFER BACK PRE OUT
+ R GREEN CENTER L GRAY BLUE SURROUND

L f

: - , , . , , , . 15

AV AUX USB

L-AUDIO-R
: - (+) (-) . - , . .

, . ( )

USB- ( )
: - USB- USB- : - USB-, USB mass storage. - USB- 500. - USB-. < USB- > .25.

, . , .

, , . , . [1] .

AM GND FM 75

FM ( )

[4] .

[5] , .

. , . . [1] .

[2] .

75- FM 75 .

(Easy Setup )
, (). . , , < > .19. [6] [MULTI CONTROL] / ().

FRONT CENTER REAR

EASY SETUP MULTI CONTROL
[7] [EASY SETUP]. - : ON () : Average ( ) : Average ( ) : Average ( ) (KRF-V7200D: [2] 7_1): ON (). Subwoofer re-mix *: ON () * , , . : - . (SP SETUP.20).
[1] [EASY SETUP], . [2] [MULTI CONTROL] / . 7_1 7.1- . 6_1 6.1- .

- KRF-V6200D .

[3] [EASY SETUP]. [4] [MULTI CONTROL] / (SMALL - , MEDIUM , LARGE - ).
5m (16'5-3/8") 4m (13'1-7/8")

3m (9'10-3/8")

6m (19'8-7/8")

7m (23'3/8")

4m (13'1-7/8")

12m2 SMALL

24m2 MEDIUM

35m2 LARGE

[5] [EASY SETUP]. 18

, , . 4.

(). , .

(SP SETUP) -.20

, , . Easy Setup . < (Easy Setup - )> .18.

(TEST TONE) -.20

SETUP MULTI CONTROL /

(DISTANCE) -.21

(LFE LEVEL) -.21

. .

[1] [SETUP], . [2] [MULTI CONTROL] / (). SP SETUP TEST TONE DISTANCE LFE LEVEL EXIT .

[3] [SETUP], .

[2] EXIT, [SETUP].

(SP SETUP)

. . [1] < > (.19) SP SETUP. [2] [MULTI CONTROL] / . SUBW ON . SUBW OFF .
- FRNT NML, CNTR LRG . - CNTR NML CNTR OFF, SURR LRG . - SURR OFF, . - BS LRG , SURR LRG. - BS MONO, SURROUND BACK L.

(TEST TONE)

. . [1] < > (.19) TEST TONE. [2] [MULTI CONTROL] / AUTO MANUAL. AUTO MANUAL ( 2 ). .
[3] [SETUP]. [4] [2]-[3] . FRNT LRG FRNT NML CNTR NML CNTR LRG CNTR OFF SURR NML SURR LRG SURR OFF BS LRG BS NML BS OFF BS L/R *1 BS MONO *1 Subwoofer re-mix *2 RMX ON RMX OFF
. . . . . . . . . . . . . . .

[3] [SETUP]. [4] . AUTO: , , [MULTI CONTROL] / . , [SETUP]. MANUAL: [MULTI CONTROL] / [SETUP]. .
, BS LRG BS NML. *2 , . [5] TEST TONE. - ,.< > .19. : - (SUBW OFF), FRNT LRG. - FRNT LRG, , (ON). , RMX ON, . - . 20
[5] . - ,.< > .19.

(DISTANCE)

. [1] , , . (L) - ________ () (C) - ________ () (R) - ________ () (RS) - ________ () (BS) - ________ () (BS) - ________ () * (BS) - ________ () (LS) - ________ () C (SW) - ________ () * , BS MONO. [2] < > (.19) DISTANCE. [3] [MULTI CONTROL] / . - .

(LFE LVL)

Dolby Digital DTS. [1] < > (.19) DISTANCE. [2] [MULTI CONTROL] / . - 0 -10 1.

[3] [SETUP].

- , EXIT (). [4] , [SETUP].
[4] [SETUP]. [5] [3]-[4], . [6] LFE LVL. - ,.< > .19.

INPUT SELECTOR

( )
, DIGITAL IN (CD/DVD, VIDEO2 DVD/6CH INPUT), , . [1] [INPUT SELECTOR] CD/DVD, VIDEO2 DVD/6CH. [2] [INPUT MODE]. : - F-AUTO *1 ( ) - D-MANUAL ( ) - 6CH INPT *2 *3 ( DVD/6CH) - ANALOG *1 ( ) , . 6CH INPT , DVD/6CH. *3 DTS.
LISTEN MODE SPEAKERS A/B/OFF

INPUT MODE

(F-AUTO):
. (Dolby Digital, DTS PCM) . , F-AUTO. AUTO DETECT. DIGITAL.

AUTO DETECT DIGITAL

[1] . [2] , [RECEIVER].

(D-MANUAL):

[SPEAKERS A/B/OFF] .

, .

, F-AUTO. D-MANUAL. , . - , [LISTEN MODE]. DVD-, DVD/6CH IN. , , .

6- (6CH INPT):

(ANALOG):
, SPEAKER B, SPEAKERS B.

SPEAKERS B

: - [INPUT MODE] , . [INPUT MODE].
: - (OFF) . , . - 6CH INPT, SPEAKERS B . 22

PURE AUDIO MODE

.

VOLUME

[1] , . [2] . [3] [PURE AUDIO MODE]. - PURE AUDIO MODE . - PURE AUDIO MODE, .

. PURE AUDIO MODE. .

[1] , . : . : - [TUNER] ( FM/AM) - [CD/DVD] - [MD/TAPE] - [VIDEO1] - [VIDEO2] - [DVD/6CH] - [AUX] - [AV AUX] - [USB] : [INPUT SELECTOR]. [INPUT SELECTOR] : (1) ( FM/AM) (2) CD/DVD (3) MD/TAPE (4) VIDEO1 (5) VIDEO2 (6) DVD/6CH (7) AUX USB AV AUX [USB/AV AUX]. (1) USB (2) AV AUX [2] . [3] [VOLUME CONTROL] [VOLUME] /, .
[PURE AUDIO MODE]. - PURE AUDIO MODE , . < > .30. : - 6CH INPT, . < > .22. - , PURE AUDIO MODE, .

ACTIVE EQ.

[4] [MULTI CONTROL] / . - ACTIVE EQ, (OFF), . [5] [TONE].
, . , , , 18. 5.1- : - Dolby Digital - Dolby Pro Logic II - DTS - DSP - DVD 6- 7.1- : - Dolby Pro Logic IIx - Neo:6
L: SW : C: R: LS : RS : BS : LB : RB :

6.1- : - Dolby Digital EX - DTS-ES - Neo:6
Dolby Laboratories. Dolby, Pro Logic D Dolby Laboratories.
DTS, DTS-ES Neo:6 DTS, Inc. 27

Dolby Digital

Dolby Digital /. Dolby Digital , () 5.1- ( ). 5.1- (//) , , ( ) . LFE . Dolby Digital , , DVD- . - , 6 , . 6 , 5.1- ,. ( ), ( 3 20 ), (LFE) 3 120.

Dolby Pro Logic IIx

Dolby Pro Logic IIx 5.1- - , , . Movie (), Music () Game () . , Game . Music : - Dolby Center Width ( ) -- . - Dolby Panorama () , . - Dolby Dimension () , .
DTS Digital Surround 5.1 . DTS Dolby Digital . 5.1- Dolby Digital, (). , /. , DTS , . DTS LFE .1. LFE LFE.

Dolby Digital EX

Dolby Digital EX 5.1- Dolby Digital. Dolby Digital EX ( ) . , Dolby Digital Surround EX (), DVD-, 5.1- . , Surround EX , , .

Dolby Pro Logic II

Dolby Pro Logic II () 5 . , Dolby Pro Logic II , , 5 . Dolby Pro Logic II Dolby Pro Logic. Dolby Pro Logic II 5.1- , 4- Dolby Surround ( , Dolby Pro Logic). ( Dolby Pro Logic II Movie) Dolby Pro Logic II 5- , , . ( Dolby Pro Logic II Game). Dolby Pro Logic II -. , . , . ( Dolby Pro Logic II Music).

DTS-ES

, (LS) (RS). , . DTS Extended Surround ( ) ES.

Neo:6

Neo:6 6 , . 6.1- 5.1- , , . ( .1 ). Neo:6 Extended Surround, 5.1- . Neo:6 . Neo:6 Music (), - , .
DSP . ( , FM). ARENA, JAZZ CLUB, THEATER, STADIUM DISCO.
DSP Digital Sound Processor ( ). . ( ). DSP , , .
, . , . , LFE. < (LFE LVL)> .21. , S.

6- DVD

DVD- 6- (5.1) , , DVD-, . , , . 6- DVD 6CH INPUT. : - LFE - , .

. DIGITAL.

PL IIx MUSIC *: MUSIC Pro Logic IIx ( DOLBY DIGITAL PRO LOGIC). PL IIx GAME *: GAME Pro Logic IIx ( DOLBY DIGITAL PRO LOGIC). PL II MOVIE *: MOVIE Pro Logic II ( DOLBY DIGITAL PRO LOGIC). PL II MUSIC *: MUSIC Pro Logic II ( DOLBY DIGITAL PRO LOGIC). PL II GAME *: GAME Pro Logic II ( DOLBY DIGITAL PRO LOGIC). PRO LOGIC: Pro Logic ( DOLBY DIGITAL PRO LOGIC). STEREO: ( DOLBY DIGITAL). * , 2-. Dolby Digital EX:

DOLBY DIGITAL EX.

DOLBY DIGITAL EX.

LISTEN MODE VOLUME /

40 , ( ). , RDS, . RDS RDS.
RDS , ( ) FM. , RDS, , . RDS RDS , .33.

BAND AUTO/MONO

RDS (RDS AUTO MEMORY) 40 RDS. 40 RDS, FM. (PS) . PTY , (). RT [DISPLAY], , . , NO RT RT ----. RDS, RDS.
MULTI CONTROL / BAND TUNER
[1] [TUNER] . [2] [BAND], . FM AM.

AUTO/MONO

: - , RDS .
[3] [AUTO/MONO], . ( AUTO) ( AUTO ).
- AUTO. , . ( ). [4] [MULTI CONTROL] / [TUNING <</>>] . ST.

RDS (RDS Auto Memory)

40 RDS. PTY, , RDS Auto Memory.
c RDS Auto Memory 1, RDS. , RDS, . < RDS (RDS Auto Memory)>.

MULTI CONTROL /

TUNER AUTO MEMORY
[1] [TUNER] . [2] [BAND] FM. [3] [AUTO MEMORY].

MEMORY

[1] , . [2] [MEMORY].
[3] 20. ( 20 , [MEMORY] ). - RDS , 01 ( 40 ). - , , RDS,. RDS AUTO MEMORY 15 RDS, 01-15 . [3] [MULTI CONTROL] / (140). [4] [MEMORY], . - [1], [2], [3] [4] . - , , .

(P.CALL)

P.CALL /
[1] TUNER, . [2] ( 40). : 15 [+10], [5]. 20 [+10], [+10], [0]. - , [+10] , , .
[1] TUNER . [2] [P.CALL I<</>>I] . - () . - [P.CALL >>I] [P.CALL I<<] , 0,5.

(PTY)

, (), . .

: , -

- , PTY. - , NO PROG .

[1], [2] [3].

TUNING /

DISPLAY

- RDS. - FM. - RDS.

DISPLAY

[DISPLAY]. [DISPLAY] : (1) (PS) (2) (RT) (3) (1) (PS): RDS . PS , NO PS.

[1] , [PTY].

RDS, . PTY RDS, NONE. [2] PTY [MULTI CONTROL] / [TUNING <</>>] .
- POP M WEATHER - ROCK M FINANCE EASY M CHILDREN . LIGHT M SOCIAL . CLASSICS RELIGION OTHER M PHONE IN NEWS TRAVEL AFFAIRS LEISURE INFO JAZZ SPORT COUNTRY EDUCATE NATION M DRAMA OLDIES , CULTURE FOLK M SCIENCE DOCUMENT VARIED
(2) (RT): , , . , NO RT RT- - - -.

(3) : .

[3] [PTY], .

( )

, 2- . A-REC. , . M-REC ( ). [4] , . - - , [AUTO/MONO].

[1] [INPUT SELECTOR] ( MD/), .

AUTO/MONO INPUT SELECTOR

[1] [INPUT SELECTOR] (CD/DVD, DVD/6CH VIDEO 2), . [2] MD- . [3] , 2-3 [AUTO/ MONO]. - : . - A-REC: (DTS, Dolby Digital ) , . - M-REC: . - M-REC, . , , . - A-REC, , . - A-REC , . A-REC:

[2] MD- . [3] , .

[1] [INPUT SELECTOR] ( VIDEO 1), . [2] , VIDEO 1, . - (REC MODE). < >. [3] , . - . .

-REC:

.
(). . ( ) . [1] [SOUND] , (C, RS, RB, BS, LB, LS SW).
[2] [MULTI CONTROL] / .

SOUND MULTI CONTROL /

, CLIP. .

[1] [SOUND] INPUT.

[1] [SOUND] , . . , . C ( , : -10 +10 ) RS ( , : -10 +10 ) RB * ( , : -10 +10 ) BS * ( , : -10 +10 ) *1 LB * ( , : -10 +10 ) LS ( , : -10 +10 ) SW ( , : -10 +10 ) INPUT ( , : -6, -3, 0) *2 NIGHT (/ , : ON (), OFF ()) *3 PANORAMA (/ Panorama, : ON (), OFF ()) DIMENSION ( ) *4 CENTER WIDTH ( ) : .
* RB LB , BS L/R. BS , BS MONO. *1 . , . *2 . *3 Dolby Digital DTS. *4 Pro Logic II Music Pro Logic IIx Music
[2] [MULTI CONTROL] / .
Midnight ( Dolby Digital DTS)
. Dolby Digital DTS (, ) , . . [1] [SOUND] NIGHT. , CD/DVD, DVD/6CH VIDEO 2 DOLBY DIGITAL DTS. [2] [MULTI CONTROL] / (ON) (OFF) .

- Dolby Digital DTS .

Panorama ( Pro Logic IIx Music Pro Logic II Music)
Panorama, . [1] [SOUND] PANORAMA. - PANORAMA.
Center Width ( Pro Logic IIx Music Pro Logic II Music)
Center Width , , . [1] [SOUND] CENTER WIDTH. - CENTER WIDTH. [2] [MULTI CONTROL] / - . .

PANORAMA .

[2] [MULTI CONTROL] / PANORAMA. - ON: PANORAMA. - OFF: PANORAMA.
Dimension ( Pro Logic IIx Music Pro Logic II Music)
, DIMENSION. [1] [SOUND] DIMENSION. - DIMENSION. [2] [MULTI CONTROL] / ( ). - . - , .

( c )

[1] [SPEAKERS A/B/OFF], .

, SP.

- , . [2] PHONES.

VOLUME /

PHONES
. , . [DIMMER]. DIMMER . . [3] [VOLUME] / .

- 2 .

DVD- Kenwood
DVD- Kenwood , , . DV-4900, DV-4070B, DV-2070, DV-203, DVF-9010, DVF-K7010, DVF-5010, DVF-R9030, DVF-R7030, DVF-3530, DV-402, DV-5900, DV-5700, DVF-R9050, DVF-J6050, DV-505, DV-503, DV-502, DVF-3550, DVF-3050, DVF-R4050, DVF-605, DV-6050, DVF-R5060, DVF-3060, DVF-3060K, DV-705, DVF-R5070, DVF-3070, DVF-3080, DVF-N7080, DVF-8100, DVF-3200, DVF-3250, DVF-3300, DVF-3400 DVF-5400.

DVD-

[1] DVD-, [DVD]. [2] DVD-, [CD/DVD] [DVD/6CH]. [3] DVD-. DVD-. ( , ).
, , DVD-, DVD- Kenwood.
ANGLE REPEAT DVD RECEIVER
AUDIO SUBTITLE DIMMER ACTIVE EQ

AUDIO SUBTITLE

TOP MENU MENU

RETURN

II () >/II (> Play) (/) I<< ( ) >>I ( )

<< ( ) >> ( )
TUNER CD/DVD MD/TAPE AV AUX

FOLDER

. , , .
. . . MUTE ( ). (OFF) . . . . < > .14-15. . MUTE. (ON) . , . , . , . USB- . < > .14-15. < > .18. < > .14-15. < > .18. . . Dolby Digital . [INPUT MODE] . . PURE AUDIO MODE.23. PURE AUDIO MODE, -.23.
USB- . . . . / . / . . . / . Dolby Digital DVD- . DVD- . . . . , DVD-. . . PURE AUDIO MODE. PURE AUDIO MODE.
. . . . . . , . . , . ,. . . . . . . . . .
. DVD-. . . . , . , . . -.7. [CD/DVD] [DVD/6CH], .
, , USB- . USB- USB- . <NO SUPPORT> DEVICE <NO SUPPORT> PROTOCOL <NO SUPPORT> FILE SYSTEM <NO SUPPORT> SIZE NO FILE NO PLAY , USB. USB-. , . . . , . . DRM ( ). . . . . USB-. . - .
NO TITLE ERROR 1 ERROR 2 ERROR 3
, . , . [ ], . - , , () .

-,. . , ,. .

, , . , , , ,. .
, , , 2. - ( ) - - BASS, TREBLE, INPUT - (/) - ACTIVE EQ - - - ( , Midnight, Panorama, Dimension, Center Width) - -
KRF-V7200D: (63 - 20 , 0,7%, 6 ).. 100 + 100 KRF-V6200D: (63 - 12,5 , 0,7%, 6 ). 100 + 100 RMS (1 , 10%, 6 ).. 120 + 120 (1 , 0,7%, 6 , ). 100 + 100 (1 , 10%, 6 , ). 120 + 120 (1 , 0,7%, 6 , )100 (1 , 10%, 6 , ) 120 (1 , 0,7%, 6 , ). 100 + 100 (1 , 10%, 6 , ). 120 + 120 ( KRF-V7200D) (1 , 0,7%, 6 , )100 (1 , 10%, 6 , ) 120 KRF-V7200D.. 0,02% (1 , 50 , 6 ) KRF-V6200D.. 0,05% (1 , 50 , 6 ) (IHF66) KRF-V7200D : CD/DVD. 20 - 80 , +0 . -3,0 KRF-V6200D : CD/DVD. 20 - 70 , +0 . -3,0 / (IHF66) CD/DVD... 100 / CD/DVD, AUX, MD/TAPE, VIDEO1, VIDEO2.. 550 /40 AV AUX.. 550 /50 DVD/6CH INPUT.. 550 /27 / REC OUT (MD/TAPE, VIDEO1).. 550 /470 PRE OUT (SURROUND BACK) ( KRF-V6200D). 0,9 /2,2 PRE OUT (SUBWOOFER).. 1,5 /1,5 BASS ( ).. +/-10 ( 100 ) TREBLE ( ).. +/-10 ( 10 ) . 32 , 44,1 , 48 , 96 / .. -15 -21 / 660 +/- 30 / .. 0,5 -/75 VIDEO/ .. 1 -/75 VIDEO/ .. 1 -/75 S-VIDEO/ Y.. 1 -/75 .. 0,286 -/75 S-VIDEO/ Y.. 1 -/75 .. 0,286 -/75 COMPONENT VIDEO/ Y.. 1 -/75 C CB/CR... 0,7 -/75 COMPONENT VIDEO/ Y.. 1 -/75 C CB/CR... 0,7 -/75

(AUDIO)

.. 87,5 - 108,0 (DIN 75 ) MONO. 1,3 /13,2 (DEV 40 , / 26 ) STEREO. 45 /42,1 (DEV 46 , / 46 ) (DIN 1 ) MONO.. 0,2% ( 71,2 ) STEREO.. 0,8% ( 71,2 ) / ( , DIN) MONO. 65 ( 40 , 71,2 ) STEREO 60 ( 40 , 71,2 ) (DIN 1 ).. 36 (DIN +/-400 ).. 64 (30 - 15 ).. +0,5 , -3,0
.. 531 - 1602 .. 16 /(600 /) / (30% ).. 50 USB-.. USB- mass storage .. USB 1.1 () .. 500
KRF-V7200D... 240 KRF-V6200D... 250 , . 0,6 . 1 ( 90 ) .. 2 ( 90 ) ... 345 () KRF-V7200D... 9,6 KRF-V6200D... 8,3 : 1. KENWOOD . . 2. ( ) .