Kenwood KVT-522dvdy Manual
Kenwood KVT-522dvdy Car Audio, size: 7.6 MB
Kenwood KVT-522dvdy Installation
Kenwood KVT-522dvdy Installation Manual
Here you can find all about Kenwood KVT-522dvdy like manual and other informations. For example: review.
Kenwood KVT-522dvdy manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Kenwood KVT-522dvdy please write about it to help other people. [ Report abuse or wrong photo | Share your Kenwood KVT-522dvdy photo ]
User reviews and opinions
|jonathanpledger||10:29pm on Friday, August 20th, 2010|
|Panasonic GF1 Screen Protector The screen protector does exactly what it says on the packaging! Great reception as well - no loss of channels Some people experience poor quality image when replacing a freewview box with a more expansive PVR box.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
MONITOR WITH DVD RECEIVER
KVT-522DVD KVT-522DVDY KVT-50DVDRY
Declaration of Conformity with regard to the EMC Directive 2004/108/EC
Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
How to read this manual Before Use Notes 7 Basic Operations 10
Using the Navigation System Control of Other Sources While Displaying the Navigation Screen
Connecting an iPod Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen
Functions During the Playback Screen Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen DVD Disc Menu VCD Zoom Control
USB Device Control
Functions When Displaying the Easy Control Panel Functions While displaying the Control Screen Folder Select
Music Disc & Audio File Listening
Functions While Displaying the Control Screen
Function During TV Screen Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen TV Menu (with KTC-D500E (optional accessory) connected only) Seek Mode Auto Memory Manual Memory Set Station Name
Video File/Picture Watching
Function During Playback Screen Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen Picture Control
Bluetooth Audio Control Radio Listening
Functions While Displaying the Control Screen Seek Mode Auto Memory Manual Memory Radio Text Traffic Information Search for Program Type
Muting Audio Volume upon Reception of Phone call 44
Muting Audio Volume upon Reception of Phone Call 44
Hands Free Unit Control
Control Screen Function When Received a Call Calling by Entering a Phone Number Quick Dialing Controlling Tone-based Services Calling by Phonebook Making a Call Using Outgoing/Incoming Call Records Calling by Voice Recognition Setting Up the Hands-Free Phone Voice Registration Key Word Voice Registration Phone Number Preset SMS (Short Message Service)
How To Use the Character Entry Screen
Setup Menu Audio Setup Crossover Network Setup DVD Setup Language Setup Parental Level Setup DivX Setup System Setup Panel Color Coordinate AV Interface Setup User Interface Direct Source Button Setup Entering Background Background Delete Background Select Touch Panel Adjustment Clock Setup Monitor Setup Security Code Setup iPod Setup TV Setup RDS Setup Bluetooth Setup Registering Bluetooth Unit Registering Bluetooth Unit PIN Code Registering Special Bluetooth Unit Bluetooth Unit Connection Deleting Bluetooth Unit Software Information Setup Memory
Audio Control Menu Audio Control Equalizer Control Tone Setup Zone Control
Battery installation Remote Controller mode switch Common operations (AUD mode) DVD/VCD/CD/Audio files (DVD mode) TV (TV mode) Radio (AUD mode) NAVI (NAVI mode)
DVD Language Codes Help? Troubleshooting Help? Error Specifications
How to read this manual
This manual uses illustrations to explain its operations. The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different.
Sets a station selection.
The mode is switched in following order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency manually.
Stores the current receiving station in memory. 1 Select a station you wish to store in memory
2 Store in memory
Next page 3
The above operation example with the mark differs from the actual operation.
2WARNING To prevent injury or fire, take the following precautions:
To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Do not watch or fix your eyes on the units display when you are driving for any extended period.
Do not touch the recording surface of the disc. Do not stick tape etc. on the disc, or use a disc with tape stuck on it. Do not use disc type accessories. Clean from the center of the disc and move outward. When removing discs from this unit, pull them out horizontally. If the disc center hole or outside rim has burrs, use the disc only after removing the burrs with a ballpoint pen etc.
In this manual, the word "USB device" is used for flash memories and digital audio players which have USB terminals. The word "iPod" appearing in this manual indicates the iPod connected with the KCA-iP300V (optional accessory).
About Video files
Acceptable video files MPEG1, MPEG2, DivX Extensions mpg, mpeg, m1v, m2v, divx, div, avi Acceptable media CD-R/RW/ROM, DVDR/RW, VCD, mass-storage8 KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
Region codes in the world
The DVD players are given a region code according to the country or area it is marketed, as shown in the following map.
DVD disc marks
Symbol Description Indicates a region number. The discs with this mark can be played with any DVD player. Indicates the number of audio languages recorded. Up to 8 languages can be recorded in a movie. You can select a favorite language. Indicates the number of subtitled languages recorded. Up to 32 languages can be recorded.
Operation regulatory marks
With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual.
Discs with limited period of use
If a DVD disc has scenes shot from multiple angles, you can select a favorite angle. Indicates the type of screen for the image. The left mark indicates that a wide image picture (16:9) is displayed on a standard TV set screen (4:3) with a black band at both the top and bottom of the screen (letter box).
Do not leave discs with a limited period of use in this unit. If you load an already expired disc, you may not be able to remove it from this unit.
When the monitor is open
When the monitor is closed
B B D E
B Open/Close the monitor
Disc loading slot
Press to open or close the monitor panel
Do not touch the moving components when you are opening or closing the monitor. If you touch the moving components, you may be hurt or the equipment may be damaged. Do not try to open or close the monitor by hand.
Press on the USB control screen to enter the USB suspend mode, and then remove the USB device. Refer to <USB Device Control> (page 36).
Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device.
A Selecting a source
Press it to display the source select screen. Touch the source button to select the source. Full Source Select screen
1 Scrolls the source display.
The displayed source depends on the type of device connected. In addition, you cannot press the button of currently unavailable source.
Favorite Source Select screen
The following buttons are always displayed on the source select screen and source control screen. 2 Press for at least 2 seconds to erase the buttons. Touch the screen to redisplay the buttons. 3 Displays the Source Select screen. The display switches between Favorite Source Select screen and Full Source Select screen by touching the button. 4 Displays Source Control screen. 5 Displays the Audio Control Menu screen. (page 80) 6 Displays the Setup Menu screen. (page 58) 7 Adjusts the volume. 8 Clock display 9 Displays the Full Source Select screen.
For how to register the frequently used source buttons to Favorite Source Select screen see <Direct Source Button Setup> (page 67).
A Screen Setup
Press the button. Displays the Screen Control Screen (page 46).
C Switches to the Navigation system
Press the button to switch the display to the navigation system screen.
B Switches to the Hands Free control
Press it for more than 1 second to the Hands Free control screen. Press it again for more than 1 second to resume the normal display.
C Turns the display OFF
Press it for more than 1 second to turn the display off. Press [NAV], [SRC] or [FNC] button, or touch the screen to resume the normal display.
Functions of the [NAV] button can be changed to rear view function. See <System Setup> (page 62) for the function setting of the [NAV] button.
B Switching the function screen
The function control screen switches in the following order each time you press the button.
Navigation screen [FNC] button Easy Control buttons appear. Picture or Video playback screen [FNC] button Easy Control buttons appear.
Picture or Video playback screen
DVD VIDEO Mode:Full AVOUT:AVIN
Easy Control button
For the functions of Easy Control buttons, see <Control of other sources while displaying the navigation screen> (page 16).
You can play DVD/VCD using various functions.
For the basic method of how to watch DVD/VCD, see <Basic Operations> (page 10). Set the remote controller mode switch to "DVD" mode before starting operation, see <Remote Controller mode switch> (page 84).
Functions During the Playback Screen
Basic functions are available even when the playback screen is displayed. 1 Display the playback screen
5 Backward Chapter Search Area Selects the previous chapter. 6 DVD Disc Menu Control Buttons Area Displays the Disc Menu Control buttons (page 20). 7 Information Display Button Area VCD playback screen
DVD VCD Mode:Full AVOUT:AVIN
[DVD] button on the "Source Select" screen
8 Scene/Track Number Display 9 Play time Display p Forward Scene/Track Search Area Selects the next scene (when PBC is On) or track (when PBC is Off ). q Backward Scene/Track Search Area Selects the previous scene (when PBC is On) or track (when PBC is Off ). w Zoom Control Button Area Displays the Zoom Control buttons (page 21). e Information Display Button Area
DVD playback screen
The information display is cleared automatically after approximately 5 seconds. Also, the information can be displayed automatically when it is updated.
DVD VIDEO Title
1 T 00:00:05
Title Number Display Chapter Number Display Play Time Display Forward Chapter Search Area Selects the next chapter.
Functions When Displaying the Easy Control Panel
Displays the basic operation buttons on the screen. 1 While the source is playing, press the [FNC] button
Switches to the source control screen to use various playback functions. 1 While the source is playing, press the [FNC] button
SCRN SCRN TI TI
1 Chapter Search (during DVD play) Searches for a chapter. Scene/Track Search (during VCD play) Selects a scene (when PBC is On) or a track (when PBC is Off ). 2 Stops playing. When pressed twice, the disc is played from its beginning when you play it in the next time. 3 Plays or pauses.
When playing a DVD
When the navigation screen is displayed, press the [NAV] button to switch to the source playback screen. The Easy Control Panel is hidden when you touch a central part of the monitor.
When playing a VCD
Switches to the playback screen. Title Number Display (during DVD play) Chapter/Scene/Track Number Display Play Mode Display Play Time Display Volume Label Display When is appeared, the text display is scrolled by pressing it. 7 Ejects the disc. 8 Fast Forwards or Fast Backwards.
9 Stops playing. When pressed twice, the disc is played from its beginning when you play it in the next time. p Selects a chapter, a scene or a track. When the DVD-VIDEO/VCD is paused, touch this button to start single-frame stepping. q Plays or pauses. w Slow Forwards or Backwards. (during DVD play) e Switches the button display. r Switches the Repeat Play operations in the following sequence. DVD: Title Repeat, Chapter Repeat, Repeat Off VCD: Track Repeat, Repeat Off (Available when the PBC is off ) t Switches the play time display in the following sequence. DVD: Chapter, Title, remaining titles VCD: Track, disc, remaining discs (Effective only when the PBC function is off ) y Function Indicator u Appears when a disc is inserted. i Sound indicator o Turns the PBC function of VCD On or Off. (only when VCD Ver 2.0 is in use) ; Appears when PBC is On. a VCD version indicator
DVD Disc Menu
Selects an option from the DVD Disc Menu. 1 Display the Disc Menu Control screen
Me n u Ctrl Top
En t e r Highlight
Canc e l
Ex i t
Calls the Menu. Returns to the Disc Menu screen. Selects a menu option. Enters your menu selection. Returns to the previous menu screen. Displays the Top Menu. Highlight Control. Clears the Disc Menu Control.
Highlight Control You can select a chapter and title for the DVD Menu screen. When you touch the screen, you can select the DVD menu.
Me n u Ctrl Top Menu Return
q Switches the subtitle language. (during program playback only) w Switches the voice language. (during program playback only) e Displays the Zoom Control screen. r Clears the Disc Menu Control. Zoom Control
Me n u Ctrl SUB
En t e r
Z o om
H i g h l i gh t
Z o omC t r l
To cancel Highlight Control, press [FNC] button.
2 Select Disc Menu options Disc Menu
t Changes the zoom ratio at 4 levels (2 times, 3 times, 4 times, or off ) each time you touch. y Scrolls the screen in the direction you touch. u Returns to the Disc Menu Control screen. i Clears the Disc Menu Control.
Me n u Ctrl
13 Z o om
9 Calls the Menu Control. p Switches the picture angle. (during program playback only) English 21
VCD Zoom Control
Displays an enlarged VCD screen. 1 Display the Zoom Control screen
Z o om x2
1 Changes the zoom ratio at 2 levels (2 times or off ) each time you touch. 2 Scrolls the screen in the direction you touch. 3 Clears the Zoom Control button.
You can recall various control screens during CD/Audio file playback.
For the basic method of how to play a music disc/audio file, see <Basic Operations> (page 10). See <List of playable discs> (page 7) for playable discs. See <About Audio file> (page 8) for playable files.
[TV] button on the "Source Select" screen
TV Mode:Full AVOUT:AVIN
TV Mode:Full AVOUT:AVIN TV TV1
G ro u p 1
1 Selects a channel. Use the <Seek Mode> (page 41) to change the channel tuning sequence. 2 Switches to TV1 or TV2.*Switches the Seek mode.*1
1 TV Band Number Display 2 TV Area Group Display. See <TV Setup> (page 74). 3 Memory Number Display 4 Channel Number Display 5 Channel Up Area Increases the channel. 6 Channel Down Area Decreases the channel. 7 Band Switch Area Switches to TV1 or TV2. 8 Information Display Button Area
When the navigation screen is displayed, press the [NAV] button to switch to the source playback screen. The Easy Control Panel is hidden when you touch a central part of the monitor. *1 Not available for the optional digital TV Tuner KTCD500E.
Switches to source control screen to use various functions. 1 While the source is playing, press the [FNC] button
7 Select a channel. Use the <Seek Mode> (page 41) to change the channel tuning sequence. 8 Switches to TV1 or TV2. 9 Switches the button display. p Selects the Auto Memory mode. See <Auto Memory> (page 41). q Switches the Seek mode. See <Seek Mode> (page 41). w Indicates current Seek mode. to buttons, you can e When recall channels on memory. For memory of broadcasting stations, see <Auto Memory> (page 41) or <Manual Memory> (page 42). r Sets a name to the tuned station. (page 42) t Lists and selects memorized station.*1
y Memorized stations are displayed. Touch to tune in.*1
*1 Not available for the optional digital TV Tuner KTC-D500E.
1 Switches to the TV screen. 2 Band display 3 TV Area Group Display See <TV Setup> (page 74). 4 Memory Number Display 5 Channel display 6 Channel information display 40 KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
TV Menu (with KTC-D500E (optional accessory) connected only)
Menu Control screen appears by touching the area shown below.
Me n u Ctrl EPG
1 Shows EPG (Electric Program Guide) screen. 2 Shows Digital TV Broadcansting menu screen. 3 Returns to the previous screen. 4 Executes selected menu item. 5 Returns to Digital TV screen. 6 Moves highlight in Digital TV Broadcansting menu.
Initial number screen
6 Phonebook data list. "REC" turns on for data with voice for voice recognition already registered. 7 Scrolls the Phonebook data list. 8 Scrolls the name. 9 Registers the voice for voice recognition to the selected Phonebook. If there are already 35 voice tag registered in the same cell-phone, [Record] button is deactivated. See <Voice Registration> (page 54). p Plays the voice registered in the selected Phonebook data. q Deletes the voice registered in the selected Phonebook data. Touch to display the confirmation screen. Touch [YES] to delete or [NO] to cancel. w Displays the detail of the selected Phonebook data. e Returns to the Initial Input screen.
4 Displays a list of numbers in the Phonebook starting with the selected number.
4 Select the phone number to call
Making a Call Using Outgoing/Incoming Call Records
Calls by selecting a phone number from the outgoing or incoming calls list. 1 Display the Outgoing Calls or Incoming Calls screen
r Calls the selected phone number. t Creates an SMS for the displayed phone number. See <SMS (Short Message Service)> (page 56). y Scrolls the phone number. u Returns to the Name List screen. 5 Make a call
: Outgoing Calls : Incoming Calls The Outgoing Calls or Incoming Calls list screen appears. 2 Select from calls list
To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of your Bluetooth Unit and your cell-phone. Initials including no corresponding name will not be displayed. During search, a non-accent character such as "u" is searched for instead of an accent character such as "".
Example : Outgoing Calls screen
Outgoing Calls list. Scrolls the list. Makes a call to the selected number. Creates an SMS for the selected phone number. See <SMS (Short Message Service)> (page 56). 5 Displays the detail of the selected phone number. 6 Returns to the Hands-Free Control screen. 3 Make a call
The Outgoing Calls list screen or Incoming Calls list screen shows the list of the calls originated from or received at this unit. They are not the ones stored in the cell-phone memory.
Calling by Voice Recognition
Calls by recognizing the registered voice.
In order to perform voice recognition, voice must be registered in the Phonebook data. See <Voice Registration> (page 54). Or, to perform voice recognition by Phone number category (Home, Office, Mobile etc.) of Phonebook data, a key word voice must be registered. See <Key Word Voice Registration> (page 54).
If you hear another Beep sound: Speak the key word within 2 seconds after the Beep, or touch the [Phonebook List] button to select the phone number.
Make a call.
If there are more than one phone numbers registered under the same name, and the key word voice is registered for each phone number, you will hear another beep. For how to register key word, see <Key Word Voice Registration> (page 54).
1 Display the Voice Recognition screen
If there are more than one phone numbers registered under the same name, go to step 3. 3 Select a Phone number category
2 Utter the voice registered in the PhoneBook
Utter within 2 seconds after the Beep. 1 Displays the recognized phone number or address. 2 Cancels voice recognition.
4 Calls the displayed phone number. 5 Creates an SMS to the displayed address. See <SMS (Short Message Service)> (page 56). 6 Selects the Phone number category. 7 Scrolls the phone number. 8 Returns to the previous screen. 4 Make a call
If the voice recognition is succeeded and there is only one phone number found:
A message is displayed if the voice is not recognized. Read the message for the further operation.
Make a call. 3 Displays the phonebook list.
Setting Up the Hands-Free Phone
The Hands-Free system can be set as follows. 1 Display the Hands Free Setup screen 8
p 2 Setup each item
"ON": Beep is heard. "OFF": Beep is canceled. Returns to the Hands-Free Control screen. Returns to the "Hands Free Setup 1" screen. Sets whether to use cell-phone phonebook, outgoing calls list and incoming calls list. ( "ON") "ON": Yes. "OFF": No. Sets the SMS function. ( "ON") "ON": Use SMS function. "OFF": SMS not available. Registers the voice to select phone number category with voice recognition. See <Key Word Voice Registration> (page 54). Registers the phone number to Hands Free Control screen preset button. See <Phone Number Preset> (page 55). Returns to the Hands-Free Control screen.
Either the time interval for automatic answer set on this unit or the time interval set on the cell-phone, whichever is shorter, takes effect. Select the speaker which is further from the microphone in order to prevent howling or echoes.
1 Moves to the "Hands Free Setup 2" screen. 2 Sets an automatic response time after call termination. ( "8") "Off": This function can not use. "0-99": Sets to calling ring time (second). 3 Sets a ringing tone output position. ( "Front R") "Front L": Outputs the tone from the front left-hand side speaker. "Front R": Outputs the tone from the front right-hand side speaker. "Front All": Outputs the tone from the both front speakers. 4 Sets the beep of the incoming call. ( "ON") "ON": Beep is heard. "OFF": Beep is canceled. 5 Sets the beep of the incoming SMS. ( "ON") English 53
1 Display the Security Code Setup screen Touch Menu" screen (page 58). in the "Setup
If you enter a different security code, the screen returns to Step 3 (for the first code entry).
6 Register the security code again
1 Displays the Security code input screen. 2 Turns the SI function on or off. If turned "ON", the burglar alarm lamp flashes when the vehicle ignition is off. ( "ON") 2 Start Security Code setup
Now, your security code is registered. If you press the Reset button or if you disconnect your receiver from the battery after the code registration, you need to enter the registered security code.
If you have already completed the code registration, you cannot touch.
3 Enter a security Code
Input four-digit number.
If you have pressed the Reset button or if you have disconnected the Receiver from battery. 1 Enter the correct security code
Performs setup when using iPod. 1 Display the iPod Setup screen Touch Menu" screen (page 58). 2 Setup each item
You must enter the same security code as that you have entered in Step 3. 2 Enter the security code 1 Sets the Audio book playback speed. 2 Sets Wide Screen on or off.
Now, you can use your Receiver.
"Wide Screen" cannot be set while the iPod is connected.
If you enter an incorrect security code, you cannot use your Receiver for a while.
Incorrect entry count or more
Receiver inoperable time 5 minutes 1 hour 24 hours
The TV signal receiving areas can be set. (with the optional accessory TV Tuner connected only) 1 Displaying TV Setup screen Touch Menu" screen (page 58). 2 Setting up TV
You can set RDS related parameters. 1 Display the RDS Setup screen in the "Setup Touch Menu" screen (page 58). 2 Setup each item
1 Moves to "TV2 Area Set" screen. 2 Sets the present TV1 receiving area.
1 Moves to "RDS Setup 2" screen. 2 Sets a news bulletin interrupt time. 3 Turns the Alternative Frequency function On or Off. ( "ON") 4 Turns the Region Restriction function On or Off. ( "ON") 5 Turns the Auto TP Seek function On or Off. ( "ON")
3 Returns to the "TV1 Area Set" screen. 4 Sets the present TV2 receiving area.
6 Returns to the "RDS Setup 1" screen. 7 Selects a display language for the PTY function.
Registers and selects Bluetooth unit. 1 Display the Bluetooth Setup screen Touch Menu" screen (page 58). 2 Setup each item
Registering Bluetooth Unit
Registers the Bluetooth unit to be connected. 1 Display the Connect Device List screen
2 Search for a Bluetooth unit
1 Sets cell-phone for Hands Free and Audio player for Bluetooth Audio. 2 Sets the PIN code of Bluetooth unit to enter when registering (pairing) from the cellphone or audio player side.
2 Selects items to be adjusted for tone curve setup. If turned "OFF", only Level can be setup for tone curves. 3 Displays the Tone curve setup screen. (page 82)
You can set a Tone curve. 1 Display the Tone screen
You can set the front and rear audio source. 1 Display Zone Control Touch in the "Audio Control Menu" screen (page 80).
See <Equalizer Control> (page 81). 2 Set the Tone
1 Displays the current source. 2 Set the Zone Control
Tone curve becomes flat. Bass adjustment items are displayed. Middle adjustment items are displayed. Treble adjustment items are displayed. Sets the Center frequency. Sets the level. Sets the Q factor. (Only Bass and Middle can be set) 8 Bass DC Extend settings (Only when Bass is selected) If turned "ON", it extends the bass center frequency to the low register by approximately 20%. 9 Returns to the "Equalizer" screen.
2 Turns the Zone Function (that sets different source sounds for front and rear speakers) On or Off. 3 Sets the front and rear audio source separately. (This button appears when the Zone function is On.)
When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source.
4 Adjusts the volume of the rear channel. (This button appears when the Zone function is On.)
There are following limitations when zone function is set to "On". - There is no output from the subwoofer. - <Audio Setup> (page 58) and <Equalizer Control> (page 81) are not available. - When "DVD" or "USB" is selected as the front source, the rear source can be selected from "Front" (same source as front), "iPod" or "VIDEO", etc. When the rear source is set to "Front", "DVD" or "USB", the same source screen or control screen is displayed in the rear monitor. See <AV Interface Setup> (page 64).
For KVT-522DVDY/KVT-50DVDRY : This unit can be operated using the Remote Controller supplied with this unit. For KVT-522DVD : Optional Remote Controller KNA-RCDV330 is designed for controlling this unit.
Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving. Do not place the battery near an open flame or heat source. This may cause the battery to explode. Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician. Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a physician.
Use two "AAA"/"R03"-size batteries. Insert the batteries with the + and poles aligned properly, following the illustration inside the case.
Remote Controller mode switch
The functions operated from the remote controller differ depending on the position of the mode switch.
AUD mode Switch to this mode when controlling a selected source or tuner source, etc.
DVD mode Switch to this mode when playing DVDs or CDs etc. with the player integrated in this unit.
If the Remote Controller operates only over shorter distances or does not operate at all, it is possible that the batteries are depleted. In such instances, replace the both batteries with new ones.
TV mode Switch to this mode when controlling TV.
The position of the remote control mode switch is indicated in the title of each mode, e.g., "(AUD mode)". When controlling a player that is not integrated in the unit, select "AUD" mode.
Common operations (AUD mode)
Source switching Switches to the source to be played.
DISP SRC MODE TOP MENU FNC/PBC MENU DVD SETUP RETURN V.SEL
OPEN Opens or closes the monitor each time you press the key.
Volume control Adjusts the volume.
AM FM+ OPEN VOL
Cursor key Moves the cursor when displaying menu.
2ABC 3 DEF
Volume attenuator Press the key once to lower the volume. Press again to restore the previous volume.
Push the unit's Reset button. If the "Error 0767" message does not disappear, see your nearest Kenwood dealer.
No Device (USB device)/Disconnected (iPod): The USB device/iPod is selected as a source although no USB device/iPod is connected.
Wire or insulate the speaker cord as appropriate and then push the Reset button (page 6).
Hot Error : When the internal temperature of this unit rises to 60C or more, the protection circuit is activated and you may not be able to operate the unit. At such times this message will appear.
Change the source to any source other than USB/iPod. Connect an USB device/iPod, and change the source to USB/iPod again.
No Music: The connected USB device contains no playable audio file. Media was played that doesnt have data recorded that the unit can play. USB Device Error!!: The connected USB device is rated a current capacity higher than the allowable limit.
Use the unit again after reducing the temperature inside the vehicle.
Hold Error : Activation of the protective circuit when the temperature inside the disc changer is higher than 60 degrees Celsius stops the disc changer from operating. At such times this message will appear.
Use when the temperature at the site where the disc changer has been fitted has dropped.
Mecha Error : The disc player is malfunctioning.
Check the USB device.
Some trouble may have occurred to the connected USB device.
Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected.
Disc Error :
Change the source to any source other than USB. Remove the USB device.
Authorization Error: Connection to the iPod has failed.
Remove the iPod and then reconnect it.
The unit does not support the iPod.
An unplayable disc is inserted.
Read Error : Disc is quite dirty.
See <iPod that can be connected to this unit> (page 7).
Update your iPod: The iPod's software is an older version which the unit can not support.
Clean the disc, referring tot he section on <Handling discs> (page 6).
Disc is upside down.
Load the disc with the labeled side up.
Region code Error : The disc you wanted to play has a region code that cannot be played with this unit. Parental level Error: The disc you wanted to play has a higher level than the parental level you set.
Confirm that the software for the iPod is the latest version. See <iPod that can be connected to this unit> (page 7).
MONITOR WITH DVD RECEIVER
KVT-522DVD KVT-522DVDY KVT-50DVDRY
1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the wire of the wiring harness. 4. Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. 5. Take Connector A on the wiring harness and connect it to the external power connector on your vehicle. 6. Connect the wiring harness connector to the unit. 7. Install the unit in your car. 8. Reconnect the - terminal of the battery. 9. Press the reset button.
If the console has a lid, make sure to install the unit so that the faceplate will not hit the lid when closing and opening. If the fuse blows, first make sure the wires arent touching to cause a short circuit, then replace the old fuse with one with the same rating. Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the - wires or ground them to any metal part in the car. After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. Mount the unit so that the mounting angle is 30 or less. This unit has the cooling fan (page 5) to decrease the internal temperature. Do not mount the unit in a place where the cooling fan of the unit are blocked. Blocking these openings will inhibit the cooling of the internal temperature and result in malfunction.
If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.
Accessories 1..1 2..1 3..2 4..1
Mounting and wiring this product requires skills and experience. For safetys sake, leave the mounting and wiring work to professionals. Make sure to ground the unit to a negative 12V DC power supply. Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. If the power is not turned ON (PROTECT is displayed), the speaker wire may have a short-circuit or touched the chassis of the vehicle and the protection function may have been activated. Therefore, the speaker wire should be checked. Make sure that all wire connections are securely made by inserting jacks until they lock completely. If your vehicles ignition does not have an ACC position, or if the ignition wire is connected to a power source with constant voltage such as a battery wire, the power will not be linked with the ignition (i.e., it will not turn on and off along with the ignition). If you want to link the units power with the ignition, connect the ignition wire to a power source that can be turned on and off with the ignition key. Use a commercially available conversion connector if the connector does not fit in the vehicle connector. Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals.
Connecting Wires to Terminals
Connector Function Guide
Pin Numbers for ISO Connectors External Power Connector A-4 A-5 A-6 A-7 A-8 Speaker Connector B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 Cable Colour Functions
2WARNING Connecting the ISO Connector
The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2 or 3, make the connection as illustrated. Please be sure to reconnect the cable as shown 2 below to install this unit to the Volkswagen vehicles etc.
Yellow Blue/White Orange/White Red Black
Battery Power Control Dimmer Ignition (ACC) Earth (Ground) Connection
Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black
Rear Right (+) Rear Right () Front Right (+) Front Right () Front Left (+) Front Left () Rear Left (+) Rear Left ()
1 (Default setting) The A-7 pin of the vehicles ISO connector is linked with the ignition, and the A-4 pin is connected to the constant power supply.
Ignition cable (Red) Unit Battery cable (Yellow) A-4 Pin A-7 Pin Vehicle
2 The A-7 pin of the vehicles ISO connector is connected to the constant power supply, and the A-4 pin is linked to the ignition.
3 The A-4 pin of the vehicles ISO connector is not connected to anything, while the A-7 pin is connected to the constant power supply (or both the A-7 and A-4 pins are connected to the constant power supply).
When the connection is made as in 3 above, the units power will not be linked to the ignition key. For that reason, always make sure to turn off the units power when the ignition is turned off. To link the units power to the ignition, connect the ignition cable (ACC.red) to a power source that can be turned on and off with the ignition key.
Connector A Battery wire (Yellow)
USB device (commercially available)
Ground wire (Black) Ignition wire (Red) FUSE ( 15A )
Connect to the vehicle's parking brake detection switch harness. Parking sensor wire (Light Green)
For the sake of safety, be sure to connect the parking sensor.
Connect to vehicles reverse lamp harness when using the optional rear view camera.
Reverse sensor wire (Purple/White)
To steering remote
Steering remote control input (Light Blue/Yellow)
To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required. When this terminal is not in use, leave its cap on. Connect to the terminal that is grounded when either the telephone rings or during conversation. To connect the Kenwood navigation system, consult your navigation manual. Connect either to the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle. Mute wire (Brown)
Power control/ Motor antenna control wire (Blue/White)
If no connections are made, do not let the cable come out from the tab.
Do not connect. Wiring harness (Accessory 1)
FM/AM antenna input (JASO)
Wiring harness (Accessory 2)
AV IN REAR VIEW CAMERA
Audio/Visual input / Rear View Camera Input Visual input (Yellow) Audio left input (White) Audio right input (Red) Audio/Visual Output Visual output (Yellow) Audio left output (White) Audio right output (Red)
REVERSE AV OUT
Rear/Subwoofer Preout Audio left output (White) Audio right output (Red)
Front Preout Audio left output (White) Audio right output (Red)
Optional Accessory Connection
iPod (commercially available) KCA-iP300V (Optional Accessory)
Audio Input Resistance-free stereo type mini plug (3.5)
iPod AUDIO IN
Audio Output (Black) Visual Input (Yellow) Resistance-free mini plug (3.5) Visual Output (Yellow) USB terminal
KCA-BT200 input (Optional Accessory)
Connection cable (Included in the Navigation System)
TV Tuner (Optional Accessory)
TV ANTENNA INPUT
Navigation System (Optional Accessory)
TO MONITOR UNIT
Connection cable (Included in the TV tuner)
Installation/Removing the Unit
Firewall or metal support
Screw (M4X8) (commercially available)
Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw (commercially available) Metal mounting strap (commercially available)
Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip).
Removing the Hard Rubber Frame (escutcheon)
1. Engage the catch pins on the removal tool 3 and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure.
Escutcheon (Accessory 4) Removal Tool (Accessory 3)
Removing the Unit
1. Remove the hard rubber frame by referring to the removal procedure in the section <Removing the Hard Rubber Frame>. 2. Remove the Hex-head screw with integral washer (M4 8) on the back panel. 3. Insert the two removal tools 3 deeply into the slots on each side, as shown.
Removal Tool (Accessory 3)
The frame can be removed from the top side in the same manner.
4. Lower the removal tool toward the bottom, and pull out the unit halfway while pressing towards the inside.
2. When the lower level is removed, remove the upper two locations.
Be careful to avoid injury from the catch pins on the removal tool.
5. Pull the unit all the way out with your hands, being careful not to drop it.
DR-110 SH09ZA8 GT-I8000 M16 Sensation 9415 Fp-IN9 SLI Lexmark 4500 IC-703 Plus ROC 85 RX-7000RBK LG 9100 LE32B450 DAV-S400 3G XV250T U8330 LN46C530f1F HMC012KD1 Ultigrill AY89 KSC-SW1 Singer 4228 Mitel 5324 MFC-8660DN TM9178 Autocad MEP Battleship G663scvi EUF27391W5 AM-U310 E 510 Powershot A410 RMP-5 X7500 SGH-I200 Avic-F710BT Eo-ettl II 2000H EFG 502 PRO 454 SRT 5429 PMC-R30L EQ-500U Mcbr170WMD Float F60850VIM 32PF5321 AX34proii WD-1223FB VP-D323I Uk TD9473 ML3471ND-ETS Gigax1008B DCR-PC350 AVR-1911 Kodak V603 DCD-500AE Rebel Siege II Intex 87PO 24 XE AQV12VBC VP-D963 Speedmaster 3000 YP-Z5FZ DP-C265 A7VL-VM Earth Array Krynn Rgbv3100-6038570-41bsgbvg051-41csgbvg034-41dsgbvg034 H5474N0 RX-V420RDS AIR800 801 LE40A556p1F Minox BL Desktop PC NAD C270 WF8702RSW 2 0 Gpsmap 60 GO 630 Gpsmap 76CX Review GX-350 FVS318G Photosmart M537 DSC-H3 SEB 324 DMR-E500H AH530 Dampfsterilisator Rcs-55 Kenwood MA-5 RM-PP404 VT3800 Drive RT-20LA30 Akm515BC Printer Nvgs320 HQ7742
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101