Video/ TV* Rear view camera* Navigation*

*Optional accessory

You can also turn off the video display by pressing the key longer than 1 second. When you press the key again, the previous video display comes back on. 3 Audio Source Selection/Power Supply [SRC] key Audio source selection changes in the following order each time you press the key.
Switches the source that is output at the AV OUTPUT terminal when it is pressed more than 1 second. q Switch Screen Mode [MODE] key Switches the screen mode. (see page 12)
You can also turn off the power by pressing the key longer than 1 second. When you press the key again,the power turns on. Push it again to turn the power on. 4 Volume Controls [VOLUME] key
Aside from the navigation system, the display turns on
when you apply the parking brake.
It is necessary to set "Navigation Source" of <AV Interface>
to "On" to add Navigation as an audio source that can be selected the with [SRC] key. (see page 53) It is necessary to engage the shift knob of car to "Reverse" to switch to rear iew camera video display.
Basic Operations of Remote Controller

NAV NAV

TV AUD

CANCEL

L SE V.

MENU ZOOM OUT

BAND+
u ATT 4 d ZOOM IN POSITION

ROUTEM VOICE 2-ZONE

VIEW MAPDIR AV OUT

SC1 SC2 OPEN

1.? & 4 GHI 7 PQRS

2 ABC 5 JKL 8 TUV 0

3 DEF 6 MNO 9 WXYZ # BS

DIRECT

REAR VOL

MODE ROUTEM VIEW SC1

1 Remote Control Mode selector switch Selects one of the following remote control modes when switched to AV control mode with [NAV] switch. TV: TV source AUD: Tuner source or attached disc changer/disc player source 2 [NAV] switch Pressing the switch until it locks enters into the navigation system control mode. Pressing the switch again returns to the AV control mode. 3 [SRC] key Audio source changes each time you press the key.

4 [VOL] key

TUNER TV DISC
Adjusts the volume. When you press the key, the volume attenuates. When you press the key again, the volume returns to the previous level.
Zooms in or out the navigation map.
5 [V.SEL] key Video source selection changes in the following order each time you press the key.

q [OPEN] key

Opens or closes the monitor each time you press the key.
Jumps to the function registered in Shortcut 2. w [2-ZONE] key
Turns Zone function on or off each time you press the key. (see page 66 for the <Zone Control>)

Muting Audio Volume upon Reception of Phone call
When the telephone is called, the system is paused automatically. When the telephone is called. The Phone Call ("CALL") screen appears, and the system automatically attenuates the audio volume. Phone Call ("CALL") screen

CALL 13:50

If you want to continue to listen to the audio source during phone call.
The system resumes audio play during the phone call. When the call ends. Hang up the phone. The system resumes playing automatically.

Tuner Control

Various control screens appear in the Tuner Source mode.
Displaying the Easy Control Panel
The Tuner Control Panel is displayed in a floating position of the selected picture.
Adjusts the volume. Switches the source. Switches the band (to AM or FM1/2/3). Tunes in a station. Switches the Seek mode. (see page 16 for the <Seek Mode>)

MODE:FULL AV-OUT:AV-IN1

For receiver key operations, see <KVT-M707 Basic Operations> (see page 8). The Easy Control Panel is hidden when you touch a central part of monitor.

2 SRC TUNER

4 A M F M Preset 1

98.1 MHz

Displaying the Tuner Control screen
You can tune in a station using various functions.

Tuner Control screen

T U N7 R E

AME SEEK Preset 1

16 CRSC FM 1

SCRL DISP 98.1 MHz

y u i o ;
Adjusts the volume. Calls the Tuner Menu. Calls the Sound Effects Menu. (see page 62) Displays the Source Select screen. (see page 44) Calls the Setup Menu. (see page 46) Turns the Traffic Information function On or Off. (see page 18 for the <Traffic Information>) Switches to the FM1/2/3 band. Switches to the AM band. Tunes in a station. Use the <Seek Mode> (see page 16) to change the frequency switching. Switches between 1 to 6 buttons and Function buttons to use. Turns the CRSC function On or Off. (Only when receiving the FM broadcast) Selects the Auto Memory mode. (See page 16 for the <Auto Memory>) Switches the Seek mode. (see page 16 for the <Seek Mode>) Selects the Program Service Name, Station Name, or Radio Text mode for text display. Scrolls the display text.
a When 1 to 6 buttons appear, you can recall the stations on memory. For memory of broadcasting stations, see <Auto Memory> (see page 16) or <Manual Memory> (see page 16). s Indicates current Seek mode.
Displaying the Tuner Menu screen
You can select menu options using various functions.

Me n u

d Selects option from various function menus. f Returns to the Tuner Control screen.
The available functions vary depending on the model used (the tuner specifications and the broadcasting system that can be received).

Tuner Menu screen

Preset Select

Name Set

PTY Search

Radio Text

Seek Mode
Sets a station selection.

Manual Memory

Stores the current receiving station in memory.
If SEEK is not shown, touch N e x t. The mode is switched in following order each time you touch the button.
Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next channel manually.
Select a station you wish to store in memory

Store in memory

2sec. 2sec.

AUTO1 AUTO2 MANU

If 1 to 6 are not shown, touch N e x t. Continue to touch until the memory number appears.

Auto Memory

Stores stations with good reception in memory automatically.
Select a band you wish to store in memory
Select the Auto Memory mode

is not shown, touch

Start Auto Memory
Touch or. Auto Memory terminates when 6 stations are stored or when all stations are tuned in.
The operation ends automatically if you do not operate within 10 seconds.
Lists and tunes in stations in memory one after the other.

Set Station Name

Names a station.
Tune in a station you wish to name

Call the Tuner Menu

Call the Preset Select Menu

TUNER 4

FM1 1) 87.5 MHz FM1 2) 90.1 MHz

Select the Set Name mode

FM1 3) 98.1 MHz FM1 4) 106.1 MHz FM1 5) 108.0 MHz
Enter a name For character entry details, see <Character Entry> (see page 43).

FM 98.1

FM1 6) 87.5 MHz
1 Tunes in the displayed station. The station name is displayed if previously set. 2 Switches the band of the displayed station list. 3 Shows the band and frequency. 4 Returns to the Tuner Menu. 5 Switches the Station List display between the Program Service Name and SNPS (Frequency).

Exit the Set Name mode

You can store up to 30 stations in memory. You can set a station name only after you have applied the parking brake.

Direct Search

Tunes in a station when its frequency is entered.

Traffic Information

When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. When the traffic bulletin starts. The Traffic Information screen appears automatically. Traffic Information screen

Select a band

Select the Direct Search mode

TUNER 13:50

Enter frequency

9 WXYZ

When you enter frequency, signal reception starts. Example: When you receive FM 92.1 MHz

WXYZ 2 ABC 1.? &

Example: When you receive AM 810 kHz

TUV 1.? & 0

1 Adjusts the volume. 2 Calls the Sound Effects Menu. (see page 62) 3 Calls the Setup Menu. (see page 46) 4 Turns the Traffic Information function on or off. If you continue to listen to the audio source during traffic bulletin.
It is necessary to have Traffic Information function set to On in order to have the Traffic Information screen appear automatically. During reception of traffic information the adjusted volume is automatically remembered, and the next time it switches to traffic information it's automatically the remembered volume.

Search for Program Type

A program is tuned when you set its program type.
You can display the radio text.

Call the PTY Search Menu

Display the Radio Text

TUNER 5

All Speech All Music

TUNER 2

R a d i o Te x t

3 SRCH

News Current Affairs Information

Not Found

1 Selects a program type. 2 Scrolls the program type list. 3 Searches for the program type. It is displayed when the Program Type is selected. 4 Continue to touch more than 2 seconds, the currently receiving station is registered to have the selected program type. (The registered program type is displayed.) If you touch it the program type registered in the currently receiving station is displayed. 5 Returns to the Tuner Menu.
1 Displays the Radio Text. 2 Returns to the Tuner Menu.

Select a program type

Search for the program type
Disc Changer/CD player Control
You can recall various control screens during Disc Changer/CD player playback. (with the optional accessory Disc Changer or CD player connected only)

SIRIUS

14 SCN SIRIUS1

SEEK 1ch

Adjusts the volume. Calls the SIRIUS Tuner Menu. Calls the Sound Effects Menu. (see page 62) Displays the Source Select screen. (see page 44) Calls the Setup Menu. (see page 46) Tunes in a station. Switches the band. Switches between 1 to 6 buttons and Function button to use. Starts or stops Channel Scan (that tunes channels one after the other). Switches the Seek mode. SEEK 1: Tunes channels one after the other. SEEK 2: Selects channels in memory one after the other. Changes the display from Song Title & Artist Name, Composer Name, Channel Name, to Category Name. Scrolls the display text.
i When 1 to 6 buttons appear, you can recall the channel on memory. For memory of channel stations, see <Channel Memory> (see page 30). o Seek Mode Indicator
Displaying the SIRIUS Tuner Menu
; Selects options from various function menus. a Returns to the SIRIUS Tuner Control screen.
For SIRIUS Tuner function details, see the Instruction Manual of SIRIUS Satellite Radio Tuner (optional accessory).

SIRIUS Tuner Menu screen

Channel Search 10key Direct

SIRIUS Information

Channel Search
The categories and channels are listed for your channel selection.

Select a category

CAT. Pop
Call the SIRIUS Tuner Menu
The channel list of the selected category appears. Channel Selection screen

SIRIUS 4

CH.SIRIUS HITS 1 CH.STARLITE

Start Channel Searching

CH.SIRIUS LOVE CH.MOVIN' EASY

CH.SIRIUS GOLD

The category list appears.

16CH 1234567

3 Re t u r n
Category Selection screen

CAT.Pop CAT.Rock

CAT.Countr y CAT.Jazz&Standard
1 Tunes in a channel. 2 Scrolls the list. 3 Returns to the Category Selection screen. 4 Returns to the SIRIUS Tuner Menu.

CAT.Clasical

Select a channel

CH.SIRIUS HITS 1

1 Selects a category. 2 Scrolls the list. 3 Returns to the SIRIUS Tuner Menu.
The selected channel is tuned.

Channel Memory

Direct Channel Search
A channel is tuned when you enter its number.

Information Display

The tuned program information is displayed.
Display the Direct Search screen

10key Direct

Display the Information screen

Direct Search screen

Information screen

SIRIUS 3

999ch J a z z E n C l ave

1 Channel Name:

Artist Name:

Song Name:

Cancel
1 Enters a channel number. 2 Returns to the SIRIUS Tuner Menu. 3 Tunes in a channel when you enter is number.

Display the DAB Information screen

Announcement screen

DAB 13:50

1 Service Label:

Ensemble Label:

Traffic News

220.094 Component Lable:

1 Adjusts the volume.

1 Displays the DAB information (such as Service label, Ensemble label, Component label, Audio quality, Region label, and Dynamic label). 2 Scrolls the information display. 3 Returns to the DAB Tuner Menu.
Weather Band Tuner Control
Various control screens appear in the Weather Band Tuner source mode. (with the optional accessory Weather Band Tuner connected only)
The Weather Band Tuner Control Panel is displayed in a floating position of the selected picture.
1 Adjusts the volume. 2 Switches the source. 3 Tunes in a station.

SRC WBT

162.550MHz
Displaying the Weather Band Tuner Control screen

WBT 13:50

Weather Band Tuner Control screen
Adjusts the volume. Calls the Sound Effects Menu. (see page 62) Displays the Source Select screen. (see page 44) Calls the Setup Menu. (see page 46) Tunes in a station.

Character Entry

When you select the Set Disc Name mode or others, the following screen appears for character entry. Character Entry screen

KENWOOD

b i p w c j q x d k r y e l s z f m t
1 Adjusts the volume. 2 Shifts the cursor. 3 Enters a space. If you erase a character, locate the cursor on it and touch this button. 4 Enters characters. 5 Scrolls up or down the character button display. 6 Exits the Character Entry mode and returns to the previous screen.
You can enter characters only after you have applied the parking brake.

Source Select

The source you wish to listen to can be selected quickly.
Displaying the Control screen
The Source Select screen can be displayed from the control screen of any source.
Press this key several times unit the Control screen appears. Control screen

13:50 TI

SEEK AME Preset 1
Displaying the Source Select screen
1 Adjusts the volume. 2 Select the source. 3 Returns to the Control screen previously displayed. Source Select screen

STANDBY TUNER

CD TV CD-CH AUX EXT
Adjusting the Monitor Display Position and Quality
You can adjust the position and picture quality of the monitor.
Displaying the Screen Control screen
You can adjust the picture quality using the following keys. 1 Brightness Control Disabled if the Auto Dimmer is On. 2 Tint Control Displayed for an NTSC system image on TV or Video. 3 Color Control Displayed on the TV/Video screen only. 4 Contrast Control 5 Black Level Adjustment 6 Displays the Adjust Monitor Position screen. (see page 45 for the <Displaying the Angle Control screen>) 7 Auto Dimmer Setup When turned "On", the display is dimmed automatically when the ambient becomes dark. 8 Returns to the previous screen.

User Interface

You can set up user interface (IF) parameters.
Displaying the User I/F 1 screen

User I/F 1 screen

1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (see page 62) 4 Calls the Setup Menu. 5 Switches the wall paper. 6 Displays the User I/F 2 screen.

Wa l l

Displaying the User I/F 2 screen

User I/F 2 screen

7 Sets an on-screen display of the navigation screen. ( Auto) "Auto": Information is displayed for 5 seconds when updated. "Off": Information is not displayed. 8 Sets an on-screen display of the video playback screen. ( Auto) "Auto": Information is displayed for 5 seconds when updated. "MANU": Information is displayed when you touch on the screen. (see page 24) 9 Sets an on-screen display of the TV screen. ( Auto) (with the optional accessory TV tuner connected only) "Auto": Information is displayed for 5 seconds when updated. "MANU": Information is displayed when you touch on the screen. (see page 24) p Displays the User I/F 1 screen.

Touch Panel Adjustment

You can adjust the touch panel operations.
You can adjust the clock time.
Display the Touch Panel Adjust screen

Display the Clock screen

If Touch touch
is not shown, to display it.

If Clock touch

Touch Adjust

RDS SYNC

To u c h
1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (see page 62) 4 Calls the Setup Menu. 5 Allows you to start touch panel adjustment.
Start to adjust the touch panel
1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (see page 62) 4 Calls the Setup Menu. 5 Clock time display. 6 Adjusts hours. 7 Adjusts minutes. 8 Sets "00" minute. Setup examples: 3:00~3:29 3:00 3:30~3:59 4:Sets the clock time in synchronization with the time data sent from the RDS station. ( Off) When turned "On", the synchronized mode starts and the clock cannot be adjusted manually.
1 Cancels the adjustment and returns to the Touch Panel Adjust screen. 2 Resets to the initial status.

Adjust the clock time

Adjust the positions
Touch the center of left lower and right upper when requested. English |

Security Code Setup

You can set a security code to protect your receiver system against theft.
Start the security code registration

P a s s Wo r d

When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note, the Security Code can be set as the 4 digit number of your choice.
Display the Security Code Setup screen

2 Clear 3

4 Enter

Security

If Security or touch
1 Enters the numbers to make your security code. 2 Clears your entry. 3 Cancels the registration and returns to the Security Code Setup screen. 4 Registers your security code.

Security Code DSI

Set Of f

Enter a security code

Input by four-digit number.
1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (see page 62) 4 Calls the Setup Menu. 5 Allows you to start security code registration. 6 Turns the DSI function on or off. If turned "On", the burglar alarm lamp flashes when the protection panel is removed. ( On)
Register your security code
Reenter the security code Reenter the same security code as that you have entered in Step 3 for confirmation.
If you have already completed the code registration, cannot touch S e t.
If you enter a different security code, the screen returns to Step 3 (for the first code entry).
Register the security code again
Now, your security code is registered. If you press the Reset button or if you disconnect your Receiver from the battery after the code registration, you need to enter the registered security code. See below for details.
If you have pressed the Reset button or if you have disconnected the Receiver from battery.
Enter the correct security code
You must enter the same security code as that you have entered in Step 3 above.

Enter the security code

Now, you can use your Receiver.

Set Up Memory

Audio Set Up and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. 1 Recalls the memorized settings. 2 Memorizes the current Audio Set Up and AV Interface settings. 3 Clears the currently memorized settings. 4 Returns to Set Up Memory screen.
Display the Set Up Memory screen

Set Up Memor y

Memorize or recall the settings When memorizing the Audio Set Up and AV Interface settings:

If Set touch

Up Memor y
If settings have already been memorized, a confirmation message appears. Touch To cancel memorization, touch. When recalling the memorized settings:
Wo u l d Yo u L i k e t o Memorize or Recall the Au d i o & AV s e t u p ?
Touching the screen displays a confirmation message. Touch. To cancel recalling, touch.
1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (see page 62) 4 Calls the Setup Menu. 5 Locks the Audio Set Up and AV Interface settings. is shown in red, you cannot When set the Audio Set Up and AV Interface settings.
When clearing the currently memorized settings:
Touching the screen displays a confirmation message. Touch. To cancel clearing, touch.
Quit memorization/recalling of settings
Display the Memory screen
To cancel memorization, touch Setup Menu screen appears again.

Memory

Please Select the D e s i r e d F u n c t i o n f ro m t h e C h o i c e s B e l ow.
SIRIUS Setup <North American sales only>
You can display the SIRIUS ID. (with the optional accessory SIRIUS Tuner connected only)
Displaying the SIRIUS Set Up screen

SIRIUS Set Up

SIRIUS Set Up screen
1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (see page 62) 4 Calls the Setup Menu. 5 Displays the SIRIUS ID

SIRIUS ID

123456789012

to display it.

DAB Set Up
You can set the DAB reception.(only with the optional accessory DAB Tuner connected)
Displaying the DAB Set Up screen

DAB Set Up screen

DAB Priority Off Off Off

6 DRC 7

Regional INT

PTY Watch

PTY Watch Off

Announcement Select

1 Adjusts the volume. 2 Calls the Sound Effects Menu. (see page 62) 3 Returns to the Control screen of the previous source. 4 Calls the Setup Menu. 5 Turns the DAB Priority On or Off. 6 Turns the Dynamic Range Control function On or Off. 7 Turns the Regional Announcement function On or Off. 8 Sets a program type to be selected automatically when the receiving ensemble starts. 9 Displays the Announcement Selection screen. (see page 61)
is not shown, touch to display it.

Announcement Selection

You can set various announcement reception parameters.
Displays the Announcement Selection screen

(page 60 9)

Announcement Tr a f f i c N e w s Tr a n s p o r t N e w s Off Off Off Off

Wa r n i n g News

4 Re t u r n 1 1
1 Adjusts the volume. 2 Turns the Announcement Reception function On or Off. 3 Scrolls the Announcement items. 4 Returns to the DAB Set Up screen.

Set the announcement parameters

Tr a f f i c N e w s

"Traffic News": Traffic information "Transport News": Time table information of public transportation services "Warning": Lower priority items than alarms (power failure, cutoff of water supply and others) "News": News flash "Weather": Weather forecasting "Events": Event information "Special Events": Undetermined event information "Radio Info": Program information, advance notice "Sports news": Sports news "Financial news": Financial news

Terminate the setup

Sound Use Before Effects Menu
You can set up the receiver sound effects.
You can display the same Sound Effects Menu on the Control screen of any source.

Control screen

Displaying the Sound Effects Menu screen

Sound Effects screen

Adjusts the volume. Calls the Sound Effects Menu. Calls the Setup Menu. (see page 46) Returns to the Control screen of the previous source.
Your setup on the <Sound Effects Menu> is adjusted automatically according to your <Audio Set Up> (see page 47) on the Setup menu. We recommend you to complete the <Audio Set Up> first, then set up the <Sound Effects Menu>.

Audio Control

You can adjust the front/ rear and right/ left audio balance.
Displaying the Audio Control 1 screen

Audio Control 1 screen

1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu. (see page 46) 4 Calls the Sound Effects Menu. 5 Adjusts the right and left volume balance. 6 Adjusts the front and rear volume balance. 7 Adjusts the volume of the present source based on the difference level of original volume.
If you have increased the volume first, then reduced the volume using the "Vol. Offset", the sound generated if you suddenly switch to another source may be extremely loud.
8 Adjusts the subwoofer volume. 9 Turns the Loudness control function On or Off. If turned "On", high and low tones are automatically enhanced during low volume. ( On) p Displays the Audio Control 2 screen.

Displaying the Audio Control 2 screen
q Adjusts the bass boost of the B.M.S power amplifier (optional accessory).

Audio Control 2 screen

You may not set some models of power amp boost to "+18". See the catalog or instruction manual of power amplifier.
BMS AMP Bass Flat BMS AMP FREQ 12 Normal
w Sets the center frequency of bass boost you have set for "AMP Bass". If you set the center frequency to "Low", it will be dropped approximately 20% to 30%. e Displays the Audio Control 1 screen.

Audio Control 2

Equalizer
You can set up the equalizer.
Displaying the Equalizer screen

Equalizer screen

To n e

System Q Natural

System Q-EX
1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu. (see page 46) 4 Calls the Sound Effects Menu. 5 Selects an equalizer curve type. You can select any of the following equalizer curves. "Natural" "Rock" "Pops" "Easy" "Top40" "Jazz" 6 Selects items to be adjusted for tone curve setup. If turned "Off", only Level can be setup for tone curves. 7 Displays the Tone curve setup screen. (see page 65)

Tone curve setup

You can set a Tone curve.

Set a level

Display the Tone setup screen

Set a Q factor

Q Factor

Tone setup screen

Ba s s DC E X T
You can set it up only when Bass or Middle is adjusted.
Close the Tone setup screen
1 Adjusts the volume. 2 Bass adjustment items are displayed. 3 Middle adjustment items are displayed. 4 Treble adjustment items are displayed. 5 Bass DC Extend settings If turned "On", it extends the bass center frequency to the low register by approximately 20%. 6 Tone curve becomes flat. 7 Returns to the Equalizer screen.
Tone curve can be set for each source.
Select a frequency band you wish to adjust
You can adjust the following frequency bands. "Bass": 40, 50, 60, 70, 80, 100, 120, 150 Hz "Middle": 500, 1k, 1.5k, 2k Hz "Treble": 10k, 12.5k, 15k, 17.5k Hz

Set a center frequency

Zone Control
You can set the front and rear audio source.
Displaying the Zone Control screen

Zone Control screen

AV-IN1
1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu. (see page 46) 4 Calls the Sound Effects Menu. 5 Turns the Zone Function (that sets different source sounds for front and rear speakers) On or Off. 6 Sets the front and rear audio source separately. (This button appears when the Zone function is On.)

When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. However, if you have set the "Area" to "Reverse", the audio source that is output at the AV OUTPUT terminal is switched depending on the front sound source.
7 Switches the front and rear audio sources. (This button appears when the Zone function is On.) Use "Reverse" to change over the front and rear audio sources. 8 Adjusts the volume of the rear channel. (This button appears when the Zone function is On.)
There are following limitations when zone function is set to "On". - There is no output from the subwoofer. - Equalizer (see page 64) and Loudness (see page 63) are not effective for the rear channel (or front channel when "Area" is set to "Reverse"). - Audio Setup function (see page 47) and Equalizer setting function (see page 64) are not available.

Troubleshooting Guide

What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General
? The power does not turn on.

The fuse has blown.

? No television/video image appears.
The unit is not connected to the parking brake
After checking for short circuits in the wires, replace the fuse with one having the same rating.
The speaker wire has a short-circuit or touches
detection switch. Make proper connections according to <INSTALLATION MANUAL>.
The parking brake is not engaged.
the chassis of the vehicle, and then the protection function is activated. Wire or insulate the speaker cable properly and press the reset button.
For safety reasons no television/video images are displayed while the vehicle is moving. Engaging the parking brake will cause images to be displayed.

? The screen is dark.

The unit is in a location where temperature is
? The message "Disconnected cable found.
Please confirm a connection line." is displayed and the unit cannot be used. Receiver unit is disconnected. Connect the wire correctly, referring to the section on <INSTALLATION MANUAL>.
? The desired source is NOT selected although
you pressed the SRC button.
A non-connected source cannot be selected.
low. If the temperature of the monitor unit drops, the screen may appear darker when power is first turned on due to the characteristics of a liquid crystal panel. Wait a while after turning power on for the temperature to rise. Normal brightness will return.