Here you can find all about Kenwood TS-570D like manual and other informations. For example: service for sale, hf transceiver.
Kenwood TS-570D manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Kenwood TS-570D please write about it to help other people.
[ Report abuse or wrong photo | Share your Kenwood TS-570D photo ]
Kenwood ts 570d
User reviews and opinions
|jayant7k||4:54am on Tuesday, August 10th, 2010|
|Great product especially at the price In a nut shell amazing what you get for your money.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Advanced Digital Technology for Everyone
Voice Synthesizer Unit
Digital Recording Unit
Deluxe Headphones (8 )
Small Headphones (12.5 )
DSP-Compatible Desktop Microphone
Deluxe Desktop Microphone
DC Power Cable
Heavy-Duty Power Supply (22.5 A)
TCXO (Temperaturecompensated Crystal Oscillator) Unit
8.83 MHz CW Filter (500 Hz bandwidth)
8.83 MHz CW Narrow Filter (270 Hz bandwidth)
8.83 MHz SSB Narrow Filter (1.8 kHz bandwidth)
* One of 3 optional IF filters can be selected for installation. Not all products are available in all markets.
enwood has brought the best of HF DSP technology out of the clouds and into the hands of everyone with the new TS-570D(G) and TS-570S(G) (HF+6m). The G series represents the latest advancements in HF radio design from Kenwood, and is even available as an upgrade to pre-existing TS-570 units.
GENERAL Transmitter Frequency Range Receiver Frequency Range Mode Power Requirement Current Drain (approx.) Operating Temperature Frequency Stability Antenna Impedance Microphone Impedance Dimensions, projections not included (W x H x D) Weight (approx.) TRANSMITTER RF Output Power Modulation SSB FM AM Maximum Frequency Deviation (FM) Spurious Radiation Carrier Suppression Unwanted Sideband Suppression Transmit Frequency Response (SSB) XIT Variable Range Antenna Tunable Range SSB/CW/FM/FSK: 100 W; AM: 25 W Balanced modulation Reactance modulation Low-power modulation Less than 5 kHz (wide) Less than 2.5 kHz (narrow) Less than -50 dB More than 40 dB More than 40 dB AM (wide mode) 400 ~ 2600 Hz (within -6 dB) FM 9.99 kHz 16.7 ~ 150 RIT Variable Range Beat Elimination Audio Output Power Audio Output Impedance FM Spurious Response Image Ratio IF Rejection Others Selectivity SSB/CW 160, 80, 40, 30, 20, 17, 15, 12, 10, 6 [TS-570S(G) only] meter bands 500 kHz ~ 30 MHz, 50 MHz ~ 54 MHz A1A (CW), J3E (SSB), A3E (AM), F3E (FM), F1D (FSK) 13.8 V DC 15% 20.5 A (transmit), 2 A (standby) 14 F ~ +122 F (-10 C ~ +50 C) Within 10 x 10 -6 (0.5 x 10 -6 with SO-2) 10-5/8 3-3/4 10-11/16 inch (271 mm) 15 lbs (6.8 kg) FM (12 dB SINAD) Squelch Sensitivity SSB/CW/AM/FSK AM (S/N 10 dB) RECEIVER Circuitry SSB/CW/AM/FSK FM Intermediate Frequency 1st IF 2nd IF 3rd IF Sensitivity SSB/CW/FSK (S/N 10 dB) Double Superheterodyne Triple Superheterodyne 73.05 MHz 8.83 MHz 455 kHz (FM only) Less than 4 V (500 kHz ~ 1.705 MHz), Less than 0.2 V (1.705 ~ 24.5 MHz), Less than 0.13 V (24.5 ~ 30 MHz), Less than 0.13 V (50 ~ 54 MHz) Less than 31.6 V (500 kHz ~ 1.705 MHz), Less than 2 V (1.705 ~ 24.5 MHz), Less than 1.3 V (24.5 ~ 30 MHz), Less than 1.3 V (50 ~ 54 MHz) Less than 0.25 V (28 ~ 30 MHz), Less than 0.25 V (50 ~ 54 MHz) Less than 20 V (500 kHz ~ 1.705 MHz), Less than 2 V (1.705~ 30 MHz), Less than 2 V (50 ~ 54 MHz) Less than 0.25 V (28 ~ 30 MHz), Less than 0.25 V (50 ~ 54 MHz) More than 70 dB More than 70 dB More than 50 dB More than 2.2 kHz (-6 dB), Less than 4.4 kHz (-60 dB) More than 4.0 kHz (-6 dB), Less than 20.0 kHz (-50 dB) More than 12.0 kHz (-6 dB), Less than 25.0 kHz (-50 dB) 9.99 kHz More than 40 dB More than 1.5 W (8 , 10% distortion, with -53 dBm input) 8
TS-570D(G) TS-570S (G)
HF Transceiver HF+6m Transceiver
Kenwood follows a policy of continuous advancement in development. For this reason specifications may be changed without notice. These specifications are guaranteed for Amateur Bands only.
ADS#09606 Printed in USA
High-end radio technology doesnt mean a high-end budget anymore Kenwood delivers it today with the all-new TS-570D(G) and TS-570S(G) (HF+6m). With 16-bit DSP technology, untouchable digital filtering, heavy-duty transmitter design, a Central Frequency Control System for near-perfect stability, and a large LCD display section coupled with an ergonomically-optimized human interface, the TS-570D/S(G) provides a clean and powerful operating experience. All of this wrapped up in a compact and efficient package makes the TS-570D/S(G) the perfect choice for home or mobiling in your car, RV or boat.
Operator -Oriented Engineering Provides You with the Highest Levels of Performance.
TX Audio Shaping You have 3 ways of tailoring your transmit audio with DSP: Voice Equalizer, Transmit Equalizer and Speech Processor functions, plus you can use the new 9-step TX sound quality monitor volume for precision control. On SSB and AM you can choose between 2 types of Voice Equalizer transmit frequency response settings according to your microphone and operating requirements. The Transmit Equalizer offers 4 frequency response settings on SSB, FM and AM: high boost for improved clarity, bass boost for stronger sound, formant pass to minimize extraneous sounds, and conventional mode for an analog sound. The Speech Processor works across three bands (SSB, FM and AM) for high compression and minimal distortion. By combining the Speech Processor gain settings with the Transmit Equalizer, you are able to shape your voice for virtually any application, plus it is now available for RX as well, complete with its own independent settings. CW Auto Tune a World first Now you no longer have to adjust the VFO while operating on CW the CW Auto Tune function does it for you automatically by adjusting the VFO to your preset pitch at the touch of a button. In the new G models the CW auto tune mode links only with the RIT frequency without changing the transmit frequency so incoming traffic can be tracked even if it is slightly off frequency. Scanning The TS-570D/S(G) has a wealth of scanning capabilities including variable speed with timebased or carrier-based resume modes, channel scan, group channel scan, all except locked out channels, or it can be programmed to scan a frequency range between two channels. The scanhold function stops the scanning for 5 seconds.
The Feature Packed TS-570D(G)/TS-570S(G) is the Perfect Choice for Any and All Requirements.
Hot Receiver Section
The wide-band receiver covers from 500 kHz through 30 MHz continuously with high selectivity and sensitivity. The two built-in pre-amps
7MHzband RF Band Pass Filter Response
REF -29.3 dBm 5 dB/ CENTER 7.0 MHz ATT 10 dB
Kenwoods TS -570D/S(G) with Advanced Technology Upgrade
16-bit AF-stage DSP delivers superb audio quality on both transmit and receive Adjustable transmit sound quality and NR1 Noise Reduction System Digital filtering with 3 new CW DSP filters give you the edge when conditions are tough Compact enough for mobiling, yet large enough to build a station around
provide a positive tactile feedback, frequencies can be directly entered on the 10-key pad, and radio controls can be customized by assigning specific menus, features, or panel switches to the Programmable Function (PF) key. And of course, Kenwoods Fine mode allows 1 Hz steps on the VFO dial for precise manual tuning. Extensive Memory Functions You have a bank of 100 memories available, with 90 assignable for standard memories and 10 for programmable VFO,
The amber-colored backlight LCD frequency display is large, with a 4-stage dimmer, and is laid out in a clear and informative manner. The 7-digit alphanumeric sub-display provides menu
RBW 3.0 kHz VBW 1.0 kHz
SWP 10 s
SPAN 14.0 MHz
CENTER 7.0 MHz
Built-in Keyer The full-featured electronic keyer provides solid and reliable keying at any speed with dual key inputs on the back one for a paddle and one for a key. You can choose between the new Manual Weight feature where the relative length of dots and dashes can be altered in 16 steps between 1:2.5 and 1:4.0, or two types of AutoWeight one that adjusts to the keying speed automatically and one that works on a fixed weight percentage. The Weight Reverse function lessens the weight as the keying speed increases, allowing for easier switching between keying hands. And during CW message playback, the paddle input can be prioritized with the Insert Keying Settings function.
Automatic Antenna Tuner The built-in Automatic Antenna Tuner is preset for immediate matching at 18 points between the 1.8 and 28 MHz Amateur bands. And dual antenna connectors on the TS-570D(G) are an added convenience. (The TS-570S(G) has one connector each for HF and 6m.)
AF-stage Digital Signal Processing
Interference Reduction AF-stage digital signal processing provides extensive control over received signals by identifying and filtering interference using digital algorithms. This results in interference reduction capabilities simply not attainable with analog designs. In addition, the new NR1 system is operator-adjustable in 9-step increments, or it can be assigned to track input signal strength automatically. Both the NR1 and NR2 settings now track when changing mode groups (eg. SSB/AM/FM to CW/FSK). The new Dual Selectable Beat
Cancel (BC) function also works against intermittent beat interference (except in CW mode). In SSB/AM/FM modes you can select a Hi/Low cut DSP slope tune using up to 441 possible combinations. In CW and FSK, the DSP acts as a VBT (Variable Band Tuning) that alters passband width, for rejection of nearby signals. The super-narrow CW filter (50 Hz) enables effective filtering even during very crowded conditions, with its center frequency tied to the pitch frequency so they track together. The G model also incorporates 3 new CW DSP filters: 80 Hz, 150 Hz, 500 Hz, for a total of 11 user-selectable filters. You can now also use the One-touch DSP filter wide mode to instantly check band conditions when operating in narrow mode. When used in conjunction with the equalizer, the CW filter reduces ringing to almost undetectable levels. There are also 3 optional filters that can be easily installed (one at a time) to acquire various IF filter bandwidth selections (see optional accessories). The DSP also provides 2 types of noise reduction the Line Enhancer Method (NR1) for SSB/AM and the
mode guidance, split frequency display and digital filter selection options. The accompanying analog meter provides S-readings, PWR, COMP, SWR and ALC information. Optimal Sizing The 10-5/8 X 3-3/4 inch panel size make the TS-570D/S(G) suitable for any mobile operation, yet its large display and sophisticated user features make it a perfect candidate to build a first-class base station with. This versatility means that you only need one radio for all your home and field operations.
(one each for high band and low band) allow you to select better sensitivity or higher IMD performance, and the dedicated 7 MHz and 14 MHz bandpass filters deliver improved SW intermodulation rejection. During split-frequency operations you can receive your transmit frequency with a touch of the TF-Set button. The transmit frequency can be changed, even if the receive frequency is locked, as long as the button is held. Other receiver section features include IF Shift, Noise Blanker to eliminate pulse type noise, AGC, All-Mode Squelch and RF Gain.
Packet & FSK
The packet filter bandwidth and AF input/output levels are fully selectable. You can adjust the ACC2 (PKD) input/output and ANO output levels. FSK features include selectable shift frequencies between 170, 200, 425 and 850 Hz. The KEY polarity and Hi/Low tones are switchable to match your RTTY device (TU, MCP). The FSK reverse function lets you match transmission methods to the other party if necessary, for example changing the BFO frequency from LSB (normal) to USB (reverse).
In addition to the CW Auto Tune function, the TS-570D/S(G) has a host of CW features often found only on larger-class models. The full/semi break-in switching and delay time settings are fully adjustable. In semi break-in the delay time between key release and active receive mode can be set for between 50 milli-seconds and 1000 milli-seconds. When using VOX operation the delay time can be set for between 150 milliseconds and 3000 milli-seconds. Other features include CW side tone monitor and volume setting, CW reverse mode and a 3 channel CW message memory.
FM Features (Built-in)
The TS-570D/S(G) has built-in CTCSS functionality with 38 sub-tones settings plus a 1750 Hz tone and switchable Narrow/Wide deviation modes. The sub-tone can be set for burst or continuous, depending on the input requirements of the target repeater system, and can be assigned to any of the first 90 memory channels. FM is not necessarily included in all models.
VS-3 The VS-3 option provides a synthesized voice output to aid visually-impaired operators or as an added measure of convenience and safety for mobile operators. PC Control Option You can integrate your TS-570 Series with a PC via a 9-pin D-SUB and RS-232C interface. The RCP-2 Radio Control Program also allows the HF operator to set-up and program multiple radios, and save the configuration data to disk. DRU-3A The DRU-3A Digital Recording Unit is an available option that enhances contesting or general operation. Data Transfer Memory settings can be transferred between radios using the copy mode. VOX Circuit In SSB, FM and AM modes the transmitter can be activated by voice, with a fully selectable delay time and gain. Linear Amplifier Control An external Linear Amplifier can be controlled via the menu and the remote jack control relay.
Advanced Technology Upgrade is available in new production models and for pre-existing TS-570D/S; contact your dealer for details.
SPAC (Speech Processing by Auto Correlation) Method (NR2) for CW. The Line Enhancer Method automatically forms a filter shape around CANCELED the target signal for a custom, dynamic BEAT BEAT BEAT noise reduction capability. In conditions where weak CW TARGET SIGNAL signals are buried deep in the noise, the SPAC Method has the ability to pull them out with either the 20 milli-second or 7.5 milli-second correlation time settings. In addition, the DSP Beat Cancel function suppresses multiple beats on SSB, FM and AM immediately upon detection, great for 40-meter broadcast station carriers.
The TS-570D/S(G) represents the latest advancements in the human-machine interface as applied to radio transceiver design. Kenwood engineers have achieved a fine balance between size, features, display, controls and performance to deliver a transceiver that will give you outstanding results regardless of your operating style or location.
High Performance Transmitter Section
The heavy-duty transmitter makes the TS-570D/S(G) ideal for contesting, mobiling and FSK applications, delivering between 5 and 100 watts in 5 watt increments. The large heatsink and high-capacity cooling fan system designed specifically for this model enables continuous operation under a wide range of environmental conditions. High frequency stability is achieved with a one-point frequency control system that uses a single crystal to control all internal oscillating frequencies (except in FM mode). Stability can even be raised to a pro-grade +/- 0.5 PPM (within 7 Hz on the 14 MHz band) with the optional SO-2 TCXO.
New Menu and User Features
There are 46 types of menu features to assist both the novice and expert operator. The Online Guide feature provides information on a scrolling sub-display so you wont need to refer to the manual, the click encoder and entry keys
On 6m too!
DSP 100 watts Preset Auto Antenna Tuner
programmable scan and longterm memory functions. The scroll function lets you browse memory contents, memory channel copy sends the contents of one channel to another, lock-out memory changes the scan map to exclude certain channels, and memory shift alters the frequency stored in a channel. In addition, there are 5 quick memories to capture a current operation on-the-fly, available in SSB, CW, FM, AM and FSK modes ideal for contest operation.
TS-570S(G) HF+6m Transceiver (Accessories sold separately.)
Download free RCP-2 control software from the Internet!
MX5800SA-22S CDE-9801R EP-MVP4A Module GNX3000 Travelmate 660 KRC-158RA Spirit FX8 Bandu DCR-HC21E Compact 300 RD-300GX CR 125 RV-NB10B Cl2909 7 2000 Drive HOW2R1 DM2000V2 Roommate Ixus 75 Flix 10 PJ551 SE-50 CPX1WF Df Igps SGH-I900C Krups FEM FW-C255 U8550 Nokia 330 730 SE DS27930 Bluetrek G3 Extreme ERB34250W8 MHC-RG66T Nerorobo AZ1500-00C VR600-02 XE-A303 CT-939MK2 RCM 169 SGH-X100 SRU538 Wide 2000 Miele S251 MEX-BT2500 PC150 Paziral CU-L43dbe5 MV750I BC 545 WA 1000 RHT-S10 AV505D SA-AX920 Gigaset 4035 Panda Sonoclock 610 TX-32LX600F Service For Sale PT-LB51NTE AR-200 WS771B Ique 3200 RL39ebms KH 6519 EWF14450 300 WL RS21kcns X-snipe 300 VPL-HW15 XR-11XC Scanmaker 3740 Hf Transceiver 170S6FS DCR-PC55E EQ-500U If-ED UE37B6000 BMW 323I Uk Versatis 155 SA-CRW55 Wrt54GC FS-1370DN XR-C2600 EL-W516B J300I RU-27FB30C Adat-LX20 AVT275X DTH8060E FAV40760 DCR-TRV120 P1001 MEH-P5100R HD-hlan CDX-3100 ZE4600 52xl2e S
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101