Reviews & Opinions
Independent and trusted. Read before buy Kenwood VR-517!

Kenwood VR-517

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page 

Download (English)
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Kenwood VR-517About Kenwood VR-517
Here you can find all about Kenwood VR-517 like manual and other informations. For example: remote, review, specs.

Kenwood VR-517 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Kenwood VR-517 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Kenwood VR-517 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

Maintenance of the unit

When the front panel or case becomes dirty, wipe with a soft, dry cloth. Do not use thinner, benzine, alcohol, etc. for these agents may cause discoloration.
In regard to contact cleaner
Do not use contact cleaners because it could cause a malfunction. Be specially careful not to use contact cleaners containing oil, for they may deform the plastic component.

_4942/02-09/EN

3/16/01, 10:16 AM

Contents

Caution : Read the pages marked safe operation. carefully to ensure
Before applying the power. 2
Safety precautions... 2 Unpacking... 2 How to use this manual.. 4 Special features.. 4
In case of difficulty.. 39 Specifications.. 41
Names and functions of parts. 5
Remote control unit (RC-R0615) (VR-506/KRF-V6050D).. 6 Remote control unit (RC-R0511) (VR-505/KRF-V5050D).. 7 Remote control unit (RC-R0617) (VR-517/KRF-V5550D).. 8
Setting up the system.. 9
Connecting audio components.. 10 Connecting video components.. 11 Connecting a DVD player (6-channel input). 12 Digital connections.. 13 Connecting to the AV AUX jacks (VR-506/517/KRF-V6050D only).. 14 Connecting the antennas.. 14 Connecting the system control.. 15 Connecting the speakers.. 16 Preparing the remote control.. 18 Speaker settings.. 19

Normal playback.. 20

Preparing for playback.. 20 Listening to a source component. 21 Adjusting the sound.. 21
For the U.S.A. FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

Recording.. 22

Recording audio (analog sources).. 22 Recording video.. 23 Recording audio (digital sources).. 23
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help.

Memory back up function

Please note that the following items will be deleted from the unit's memory if the power cord is disconnected from the AC outlet for approximately 2 days. Power mode. Input selector settings. Device preset. Picture output. Speaker ON/OFF Volume level. BASS, TREBLE, INPUT level. Subwoofer ON/OFF. Dimmer level. Monitor ON/OFF. MD/TAPE settings. 6ch/2ch input setting. Listen mode setting. Speaker settings. Input mode setting. Midnight mode setting. Broadcast band. Frequency setting. Preset stations. Tuning mode. CINEMA EQ. Source Direct.
Universal IR (InfraRed) remote control (Except for VR-505/KRF-V5050D)
In addition to the basic receiver, the remote control supplied with this receiver can also operate almost all of your remote controllable audio and video components. Just follow the simple setup procedure to register the components you have connected.
Names and functions of parts

Speaker indicator

SP A B TI.VOL CLIP MUTE RDS EON PTY TP TA NEWS
Frequency display, Input display, Preset channel display, Surround mode display
AUTO SOUND indicator Band indicators

PRO LOGIC indicator

CLIP indicator MUTE indicator
AM PRO LOGIC S.DIRECT MEMO MHz 3 STEREO MONITOR ST. TUNED kHz DOWNMIX DSP
DIGITAL indicator S.DIRECT indicator AUTO indicator AUTO FM AUTO SOUND DIGITAL MEMO indicator ST. indicator
DOWNMIX indicator Speaker selection indicators Input channel indicators Output channel indicators
TUNED indicator MONITOR indicator DSP indicator

Display

3 STEREO indicator STEREO indicator

VOLUME CONTROL

STANDBY

DOLBY DIGITAL

DSP MODE

INPUT SELECTOR

SET UP

INPUT MODE

DIMMER

MONITOR

ON/STANDBY ON/STANDBY
SOUND MULTI CONTROL A SPEAKERS B BAND

LISTEN MODE

SOURCE DIRECT

ON OFF

For VR-506/ 505/517

Notes 1. Be sure to insert all connection cords securely. If their connections are imperfect, the sound may not be produced or noise may interfere. 2. Be sure to remove the power cord from the AC outlet before plugging or unplugging any connection cords. Plugging/unplugging connection cords without disconnecting the power cord can cause malfunctions and may damage the unit. 3. Do not connect power cords from components whose power consumption is larger than what is indicated on the AC outlet at the rear of this unit.

Analog connections

Audio connections are made using RCA pin cords. These cables transfer stereo audio signal in an analog form. This means the audio signal corresponds to the actual audio of two channels. These cables usually have 2 plugs each end, one red for the right channel and one white for the left channel. These cables are usually packed together with the source unit, or are available at your local electronics retailer.
Connecting audio components
Shape of AC outlets U.S.A. and Canada

Australia

Other countries

SYSTEM CONTROL jacks %

PLAY IN MONITOR OUT DVD

REC OUT

PLAY IN

VIDEO 1

To AC wall outlet
R REC OUT PLAY IN MD/TAPE AUDIO REC OUT PLAY IN VIDEO2/MONITOR
Video component, 3 head cassette deck, or Graphic equalizer
Cassette deck or MD recorder IN
(For VR-505/517/KRF-V5550D) OUT CD or DVD player

OUT Record player

Moving coil (MC) cartridge record player cannot be used directly from the receiver unit. It can only be used when another equalizer amplifier is connected.
When you connect the audio cord of the video component to the VIDEO 2/MONITOR jacks, connect the video cord (yellow RCA pin cords) of the connected component to the VIDEO 2 IN jack.

_4942/10-19/EN

3/16/01, 3:04 PM
Connecting video components

About the S VIDEO jacks

S VIDEO
S Video jacks (VR-506/517/KRF-V6050D)
Use the S VIDEO jacks to make connections to video components with S VIDEO IN/OUT jacks.
If you use the S VIDEO jacks to connect your video playback components, be sure to use the S VIDEO jacks when connecting your monitor and video recording components.

VIDEO 2 IN CD/DVD IN DVD

MONITOR OUT

VIDEO 1 OUT

CD / DVD

VIDEO 1 IN

REC OUT PLAY IN MD / TAPE AUDIO
REC OUT PLAY IN VIDEO 2/MONITOR

REC OUT PLAY IN VIDEO 1

Monitor TV VIDEO IN
IN Video inputs (Yellow RCA pin cords) Video deck IN OUT Video inputs and outputs (Yellow RCA pin cords) IN OUT Audio inputs and outputs

DVD player or LD player

A video component with digital audio outputs should be connected to the VIDEO2 jacks.
Connecting a DVD player (6-channel input)
If you have connected a DVD player to the receiver with digital connection, be sure to read the Input mode settings section carefully. 9

VIDEO 2

VIDEO 3
VIDEO 2 IN MONITOR OUT VIDEO 1 IN
(Except for VR-505/KRF-V5550D)

CD/DVD IN DVD

CENTER
FRONT SURROUND SUB WOOFER VIDEO 2/MONITOR COAXIAL

DVD/6CH. INPUT

S VIDEO cord
VIDEO OUT (Yellow RCA pin cord)

FRONT OUT L/R

SURROUND OUT L/R

CENTER OUT

DVD player COAXIAL DIGITAL OUT (AUDIO) S VIDEO OUT

SUBWOOFER OUT

To switch the speakers off , press the MUTE key.
CAUTION (Except for U.S.A. and Canada)
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard. Do not place any objects impairing heat radiation onto the top of unit. Leave a space around the unit (from the largest outside dimension including projection) equal or greater than, shown below. Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm
CAUTION (For U.S.A. and Canada)
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard. Do not place any objects impairing heat radiation onto the top of unit.

Digital connections

The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD) format digital signals. If you have connected any digital components to the receiver, be sure to read the Input mode settings section carefully. 9

VIDEO 2/MONITOR COAXIAL

CD/DVD OPTICAL

DIGITAL IN

Optical fiber cable
OPTICAL DIGITAL OUT (AUDIO)

CD player

COAXIAL DIGITAL OUT (AUDIO)
COAXIAL DIGITAL OUT (AUDIO) Component with a DTS, Dolby Digital, or PCM COAXIAL DIGITAL OUT
RF digital demodulator (DEM-9991D) (sold separately)
Connect the video signal and analog audio signals to the VIDEO 2 jacks. (See Connecting video components.) !
DOLBY DIGITAL RF OUT (AUDIO)

PCM OUT

LD player
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D). Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver. Connect the video signal and analog audio signals to the VIDEO 2/MONITOR jacks. (See Connecting video components.)
Connecting to the AV AUX jacks
(VR-506/517/KRF-V6050D only)
The AV AUX jacks are convenient for connection of video components such as a camcorder or a video game.

Connecting the antennas

AM loop antenna
The supplied loop antenna is for use indoors. Place it as far as possible from the receiver, TV set, speaker cords and power cord, and adjust the direction for best reception.
AM antenna terminal connections
1 Push lever. 2 Insert cord. 3 Release lever.

FM indoor antenna

S VIDEO V AV AUX L AUDIO R

Registering setup codes for KENWOOD audio components (VR-506/517/KRF-V6050D/V5550D)
If you own remote controllable KENWOOD audio components that are not compatible with system control, registering the setup code enables you to control those components using the remote control supplied with this unit (without connecting system control cords). To register setup codes for your remote controllable KENWOOD audio components, see Registering setup codes for other components.
In order to take advantage of the system control operations, the components must be connected to the correct jacks. To use a CD player it must be connected to the CD jacks. To use a cassette deck (or MD recorder) it must be connected to the MD/TAPE jacks. When using more than one CD player (etc.) only the one connected to the specified jacks may be connected for system control. Some CD players and cassette decks are not compatible with the [SL16] system control mode. Do not make system connections with equipment that is not [SL16] compatible. Some MD players are not system control compatible. You cannot make system control connections to this kind of equipment. Notes 1. [SL16] equipment cannot be combined with [XR], [XS], and [XS8] equipment for system operations. If your equipment consists of this kind of combination, please do not connect any system control cords. Even without system control cords, normal operations can be carried out without effecting performance. 2. Do not connect system control cords to any components other than those specified by KENWOOD. It may cause a malfunction and damage your equipment. 3. Be sure the system control plugs are inserted all the way in to the system control terminals.
Do not connect a system control cord to a cassette deck connected to the VIDEO2/MONITOR jacks.

Connecting the speakers

1 Strip coating. 2 Loosen.
Connection of banana plugs (For U.S.A. and Canada)

1 Secure. 2 Insert.

3 Insert.

4 Secure.

Sound will not be heard if the speaker terminal is not fully secured.
Never short circuit the + and speaker cords. If the left and right speakers are connected inversely or the speaker cords are connected with reversed polarity, the sound will be unnatural with ambiguous acoustic imaging. Be sure to connect the speakers correctly.

1 Strip coating.

2 Push the lever.

Speaker impedance

After confirming the speaker impedance indications printed on the rear panel of the receiver, connect speakers with matching impedance ratings. Using speakers with a rated impedance other than that indicated on the rear panel of the receiver could result in malfunctions or damage to the speakers or receiver.

1 Turn on the power to this receiver by pressing POWER

or ON/STANDBY key(s).

2 Select a speaker system.
1 Press the SET UP key such that the subwoofer setting indication (SUBW ON) appears.
If you selected LRG as the center speaker setting, 1 SURR LRG (large): Large surround speakers are connected to the receiver. 2 SURR NML (normal): Average size surround speakers are connected to the receiver. 3 SURR OFF: Surround speaker setting mode to the receiver is OFF. If you have selected other than LRG as the center speaker setting, 1 SURR ON: Surround speaker setting mode to the receiver is ON. 2 SURR OFF: Surround speaker setting mode to the receiver is OFF. 9 Press the SET UP key again to accept the setting. The receiver enters the speaker volume level adjustment mode. In steps 3 and 4, indications appear only for the selected channels of the speakers that require adjusting.
FM AUTO SOUND DIGITAL AUTO AM PRO LOGIC S.DIRECT MEMO MHz 3 STEREO MONITOR ST. TUNED kHz DOWN MIX DSP
2 Use the MULTI CONTROL keys to select the appropriate subwoofer setting. 1 SUBW ON: Subwoofer setting mode to the receiver is ON. 2 SUBW OFF: Subwoofer setting mode to the receiver is OFF. The initial setting is SUBW ON. When the setting SUBW OFF is selected, the front speakers are automatically set to FRNT LRG and the procedure skips to step 5. When subwoofer output sound is required, select FRNT NML. 3 Press the SET UP key to accept the setting. The front speakers setting indication (FRNT) appears.
3 Adjust the speaker volume.
From your usual listening position, adjust the volume levels. The volume levels from each speaker should be the same.
1 Use the MULTI CONTROL keys to adjust the volume of the test tone output from the speaker channel to be adjusted. The channel indication blinks while the test tone is being output.
The test tone is heard from the speakers in the following sequence for 2 seconds each: = L = C = R = SR = SL = SW If you change the volume level settings for the speakers while listening to music, the settings referred to on this page are also changed. If the speaker setting selects are changed, the speaker level settings are reset. 2 Press the SET UP key. The test tone is turned off. The receiver enters the mode for inputting the distance to the speakers.
4 Use the MULTI CONTROL keys to select the appropriate front speakers setting. 1 FRNT NML (normal): Average size front speakers are connected to the receiver. 2 FRNT LRG (large): Large front speakers are connected to the receiver. For FRNT LRG selection, no sound will be heard from SUBW even when it is set to ON. However, if you select CINEMA EQ. when subwoofer is selected, you will be able to hear sound from the subwoofer. When in STEREO mode, the sound goes directly to front speaker. 5 Press the SET UP key to accept the setting. The center speaker setting indication (CNTR) appears.

Continued to next page

Muting the sound

The MUTE key lets you mute the sound of the speakers. Press the MUTE key.
SP A B TI.VOL MUTE CLIP RDS EON PTY TP TA NEWS

To cancel

Blinks
Press the MUTE key again so that the MUTE indicator goes off. MUTE ON can also be deactivated by turning the volume control knob.

Recording a music source

When recording a music source, switch the VIDEO2/MONITOR setting to MONITOR. Use the INPUT SELECTOR knob to select the source (other than TAPE) you want to record. 2 Set the cassette deck or MD recorder to record. 3 Start playback, then start recording.
SOURCE DIRECT playback (for analog input sources only)
Use this function to pass the source material direct to the amplifier, bypassing any audio processing. Press the SOURCE DIRECT key.
Recording tapes or MD (with MONITOR function)
When you press the LISTEN MODE, SOUND, or SET UP keys, or switch to another input source, SOURCE DIRECT playback will be canceled. If CINEMA EQ. is switched ON, SOURCE DIRECT key will not be effective. When recording a music source, switch the VIDEO2/MONITOR setting to MONITOR. 9
MONITOR = MD/TAPE recording 1 Press the MONITOR key.
Press the SOURCE DIRECT key again. If SOURCE DIRECT playback was activated while in surround mode, canceling SOURCE DIRECT playback will reactivate the previous surround mode.
2 Use the INPUT SELECTOR knob to select a source other than MD/TAPE. 3 Start playback on the cassette deck connected to the MONITOR jacks and start recording on the cassette deck or MD recorder connected to the MD/TAPE jacks. MD/TAPE = MONITOR recording 1 Use the INPUT SELECTOR knob to select MD/TAPE. 2 Start playback on the cassette deck connected to the MD/TAPE jacks and start recording on the cassette deck or MD recorder connected to the VIDEO2/MONITOR jacks. To copy tapes using a double cassette deck, refer to the instruction manual of the double cassette deck.
Listening with headphones
1 (VR-506/KRF-V6050D) Press the SPEAKERS A or B key so that the speaker indicator goes off. (VR-505/517/V5050D/V5550D) Press the SPEAKER key so that the speaker indicator goes off. Make sure the SPEAKERS indicators are turned off.
Make sure the SP indicators are turned off.
MONITOR function (analog sources only)
You can connect a cassette deck or graphic equalizer to the VIDEO2/ MONITOR jacks of the receiver. If a graphic equalizer is connected, the MONITOR key should be left in the on position. Alternately, if a cassette deck equipped with a 3-head system is connected to the VIDEO2/ MONITOR jacks, you will be able to monitor the just-recorded signal while making recordings on the cassette deck. By switching the MONITOR key on and off, you can compare the sound of the source signal and the just-recorded signal. For more information, refer to the instruction manual of the connected component.

DVD player operation keys You can perform these basic operations using the keys described below when connected to KENWOOD DVD player.

POWER 3

Numeric keys (Select tracks)

9 POWER

RECEIVER (Receiver mode) RETURN (Return) TITLE (Title) %(Cursor ) (Cursor ) #(Cursor \) @(Cursor |) ENTER (Enter) 6 (3 Play) 7 (Stop) 8 (Pause)
MENU (Menu) OSD (OSD menu)
P.CALL MULTI CONTROL ENTER BAND P.CALL

1 (Search) (Search)

_4942/32-44/EN 32
CASSETTE deck, CD player & MD recorder operations

(For VR-505/KRF-V5050D)

You can perform these basic operations using the keys described below when connected to KENWOOD cassette deck, MD recorder or CD player equipped with system control operations. %
Cassette deck operation keys

CD player operation keys

P.CALL MULTI CONTROL ENTER BAND

4 (Skip down)

(Skip up) 6 (3 Play/Pause) 7 (Stop)
1 (Rewind) (Fast forward)
2 (Play) 6 (3 Play) 7 (Stop)
1 (Search) (Search) DISC SKIP
MD recorder operation keys
4 (Skip down) 1 (Search) (Search) +100 (Select track)
(Skip up) 6 (3 Play) 7 (Stop)
A/B+100 BASS BOOST DISC SKIP
Notes 1. Certain codes may only operate some of the function available on a given model. 2. The charts above show the typical functions available for each component. Some manufacturers use different key combinations to perform similar functions. For that reason, we have programmed extra functions on some of the unused number keys to help you control your equipment.

_4942/32-44/EN

3/16/01, 3:11 PM
POWER 3 TV 6 VCR 9 RETURN LSTN M. DSS DVD 0 CABLE MENU SET UP P.CALL MULTI CONTROL +10 OSD SOUND 9 RETURN LSTN M. DSS 2 3

POWER P.CALL

RC-R0617

RC-R0615

_4942/32-44/EN 34 3/16/01, 3:11 PM

POWER POWER

0 CABLE MENU SET UP P.CALL
4 (Skip down) 1 (Search) (Search) DISC SKIP

(Skip up)

6 (3 Play/Pause) 7 (Stop)

RETURN LSTN M. DSS

MENU SET UP P.CALL
4 (Skip down) 1 (Search) (Search) +100 (Select tracks)

6 (3 Play) 7 (Stop)

Other components' operations (For VR-506/517/KRF-V6050D/V555OD)
Refer to the following for the type of remote control operations available for each component. Select the input source. Press the keys corresponding to the operations you desire. Refer to the following sections for details.
When pressing keys in succession, press each key firmly and be sure to wait at least 1 second before pressing the next key. Numeric keys function the same as the numeric keys on the original remote. These keys can be used to perform the basic operations of KENWOOD and other makers' components which the setup code for each component had been entered beforehand.

TV operation keys

ENTER (Enter)

TV SEL. (TV Selector)

INPUT SEL. (Input Selector)

MUTE VOLUME

RC-R0617 RC-R0615 Continued to next page
_4942/32-44/EN 36 3/16/01, 3:11 PM

VCR operation keys

6 (3 Play) 7 (Stop) 8 (Pause) INPUT SEL. (Input Selector)
DVD player operation keys
RETURN (Return) MENU (Menu) OSD (OSD menu)
%(Cursor ) (Cursor ) #(Cursor \) @(Cursor |) ENTER (Enter) 6 (3 Play) 7 (Stop) 8 (Pause)
TITLE (Title) 4 (Skip down) (Skip up)
%(Cursor ) (Cursor ) @(Cursor |) #(Cursor \) ENTER (Enter) 6 (3 Play) 7 (Stop) 8 (Pause)
DSS receiver operation keys

0 CABLE

%(Cursor ) (Cursor ) #(Cursor \) @(Cursor |) ENTER (Enter)
%(Cursor ) (Cursor ) @(Cursor |) #(Cursor \) ENTER (Enter)
AUTO DVD INPUT SEL. TUNER DISC SEL. CINE.EQ B.BOOST RECEIVER TITLE PHONO
Cable tuner operation keys
POWER 3 TV 6 VCR 9 RETURN LSTN M. DSS DVD

Tuning

T (P. CALL +)

BAND AUTO

In case of difficulty
Resetting the Microcomputer
The microcomputer may malfunction (unit cannot be operated, or shows an erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor. If this happens, execute the following procedure to reset the microcomputer and return the unit to its normal operating condition.
For U.S.A. and Canada Unplug the power cord from the wall outlet, then plug it back in while holding down the POWER key. For other countries
Please note that resetting the microcomputer will clear the contents of the memory and returns the unit to the state it was in when it left the factory.
With the power cord plugged in, turn the POWER key OFF. Then, while holding down the ON/STANDBY key, press POWER.

Amplifier

Symptom No sound from the speakers. Cause The speaker cords are disconnected. VOLUME is set to the minimum position. MUTE is ON. The SPEAKERS switches are set to OFF. The standby indicator blinks and sound is not output. Sound is not output from one of the speakers. Speaker cords are short-circuited. Remedy Connect them properly referring to Connecting the speakers & Adjust the volume to a proper level. Turn OFF the MUTE. Set the SPEAKERS switch(es) to ON. ) Turn the power off, eliminate the short-circuiting, then turn on the power again. Connect it properly referring to Connecting the speakers. & Connect it properly referring to Connecting the speakers. & Select a surround mode. Adjust the speaker levels using the test tone. ( Insert the audio cord plugs securely into the PHONO jacks. Connect the grounding wire to the GND terminal on the rear panel. Set the input mode to digital manual before starting playback of the Dolby Digital source. 9 Press the INPUT MODE key to select to digital auto mode. 9 Copy-guarded video software cannot be recorded.

The speaker cord is disconnected.
Sound is not output from the surround speakers and / or the center speaker, or their sound is very small.
The surround speaker cords and/or the center speaker cord is disconnected. A surround mode has not been engaged. The surround and/or center volume controls are set to the minimum level. The audio cord from the turntable is not connected to the PHONO jacks. The turntable is not grounded.
A humming noise is generated when the PHONO input selector is selected.
When playing a Dolby Digital source signal using a DVD player, the sound is cut off soon after it starts. No sound is produced during playback from a DVD player. A video source cannot be recorded normally.
There are many possible causes for this problem, depending on the type of DVD player used.
The input mode is set to digital manual.
The software is copy-guarded.
Symptom Radio stations cannot be received. Cause No antenna is connected. The broadcast band is not set properly. The frequency of the desired station is not tuned. Noise due to ignition noise from an automobile. Noise due to interference from an electric appliance. Noise due to a nearby TV set. Remedy Connect an antenna. $ Set the broadcast band properly. Tune the frequency of the desired station. Install the outdoor antenna away from the road. Turn off the power to the appliance. Install the receiver farther away from the TV.

Interference.

A station which was preset cannot be received by pressing the corresponding numeric key.
The preset station belongs to a frequency that cannot be received. The preset memory was cleared because the power cord had been unplugged for a long period of time.
Preset a station with a receivable frequency. Preset the station again.

Remote control unit

Symptom Certain inputs cannot be selected using the remote control. Remote control operation is not possible.
Cause No setup codes registered at for the respective input(s). The remote control is set to a different operation mode. Batteries are exhausted. The remote control unit is too far away from the main system, controlling angle is too large, or there is an obstacle between the receiver and the remote. The audio cords and system control cords are not connected properly. No software is loaded in the source component. An attempt is made to play a tape which is being recorded in the cassette deck. The remote control has not been set to the operation mode for the component you wish to control. The microprocessor of the remote control malfunctions.

Remedy Register a setup code at the respective input(s). Press the source select keys or source POWER keys to select the appropriate operation mode. Replace with new batteries. Operate the remote control unit within the controllable range.
Connect properly referring to Setting up the system. Place software in the source component you want to play. Wait until recording has completed. Press the source select keys or source POWER keys to activate the operation mode for the component you want to control before operation. Reset the microprocessor.
_4942/32-44/EN 40 3/16/01, 3:11 PM

Specifications

For U.S.A and Canada AUDIO section (VR-506)
Rated power output during STEREO operation 100 watts per channel minimum RMS, both channels driven, at 8 from 40Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC) Effective power output during SURROUND operation FRONT (40-20kHz, 0.7% T.H.D. at 8 one channel driven)... 100 W + 100 W CENTER (40-20kHz, 0.7% T.H.D. at 8 one channel driven)... 100 W SURROUND (40-20kHz, 0.7% T.H.D. at 8 one channel driven)... 100 W + 100 W Total harmonic distortion.. 0.050% (1 kHz, 50W, 8 ) Frequency response CD.. 10 Hz ~ 60 kHz, +0 dB, 3.0 dB Signal to noise ratio (IHF66) PHONO (MM).. 74 dB CD.... 90 dB Input sensitivity / impedance PHONO (MM).. 2.5 mV / 27 k CD... 200 mV / 47 k MONITOR IN (VIDEO2/MONITOR). 200 mV / 47 k DVD/6ch INPUT... 200 mV / 47 k Output level / impedance TAPE REC.. 200 mV / 1 k MONITOR OUT (VIDEO2/MONITOR). 200 mV / 1 k PRE OUT (SUBWOOFER).. 1.5 V / 2.2 k Tone control BASS... 10 dB (at 70 Hz) TREBLE... 10 dB (at 10 kHz)

DIGITAL AUDIO section

Sampling frequency.. 32 kHz, 44.1 kHz, 48 kHz, 96kHz Input level / impedance / wave length Optical.. (15 dBm ~ 21 dBm), 660 nm 30nm Coaxial... 0.5 Vp-p / 75

VIDEO section

VIDEO inputs / outputs VIDEO (composite).. 1 Vp-p / 75 S VIDEO inputs / outputs (VR-506/517) S VIDEO (luminance signal).. 1 Vp-p / 75 S VIDEO (chrominance signal).. 0.286 Vp-p / 75

FM tuner section

Tuning frequency range.. 87.5 MHz ~ 108 MHz Usable sensitivity (MONO). 1.3 V (75 )/ 13.2 dBf (75 kHz DEV., SINAD 30 dB) 50dB quieting sensitivity STEREO... 28 V (75 )/ 40.2 dBf Total harmonic distortion (1 kHz) MONO... 0.5% (71.2 dBf input) STEREO.. 0.7% (71.2 dBf input) Signal to noise ratio (1 kHz, 75 kHz DEV.) MONO.. 75 dB (71.2 dBf input) STEREO... 68 dB (71.2 dBf input) Stereo separation (1 kHz)... 40 dB Selectivity (400 kHz)... 70 dB Frequency response.. (30 Hz ~ 15kHz), +0.5 dB, 3.0 dB

Tuning frequency range 9 kHz step... 531 kHz ~ 1,602 kHz 10 kHz step.. 530 kHz ~ 1,610 kHz Usable sensitivity.. 16 V / (600 V/m) Signal to noise ratio (30% mod. 1 mV input).. 50 dB
Power consumption KRF-V6050D/V5050D.. 270 W KRF-V5550D... 200 W AC outlet SWITCHED.. (total 90 W max.) Dimensions... W : 440 mm H : 143 mm D : 400 mm Weight (Net) (KRF-V6050D/V5050D).. 9.3 kg (KRF-V5550D)... 8.4 kg

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product. Model __________________ Serial Number ________________________

 

Tags

EBM-900 Rode NT3 WK-1630 Gabbana WF-S1061 Iriver E100 IT-C200 D-E441 IC-4KL Letters TX-26LXD65F MG15fxmsdm RHT-G550 RC-3001 Remote Pocket PC 42LG51RC Mh-71 ML-2510 ETS CLP-650 Watch C50 MB-387W Symphony 2200 IX 4000 DVD-S35 Omron CQM1 Ft-1000MP RB-1552 LD-1416T NP-R519-da04UA ZWM280 FZR600L K7VM3 A120S C950-52477-5 Sirius DVD-R120E 50PS6000 Digitech RP20 Transporter Smcwusbt-G SU-X320 TDS 500D B 380 FWD796-21M Lexmark 8300 PCG-K315B CM480 System Samsung J843 ESF43011 Professional Assault Mixer SL-MV60 GWA-4164B RM4230 RX-D13 KX-W1030 D-E404 DCR-DVD703E Specs W2442PA-SF DVP-SR700H PG-200 Final Bout LHX-557 AV-21A10 SD 600 Optra M410 Modeler TX-28DTM1 All-IN-ONE KX-TGA807E Olympus C-25 HC-4500 380EX TX-14S3TP DG2661 Canon MV5 ER2061 KX-TCD150NE DCR-DVD100 NP-R509-xa02ES DAV-DX250 SX Mini 4340CT DA6241 G4010 Wixe13 DVP721VR Review Samsung 172N CN 3656 DVR 522 YBR125-2006 Ms 10 Yanmar 3GM R580 Js02 Externe SC-PM86D TX-DS939 Dvdr3440H-31

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101