Assembly Instructions

Study these instructions carefully before assembling and ucing the equipment. The lnstructions contain important information for your safety and for the use and maintenance of the rowing machine. Keep the instructions in a safe place for your own information, for maintenance work and ordering spare parts. For Your Safety
The rowing machine should be used only for its intended pur In case of enquiry, please contact your KETTLER dealer. If the equipment is in regular use, check all its components thor-
pose, i.e. for physical exercise by adult persons.
Any other use of the equipment is prohibited and may be dan-
gerous. The manufacturer cannot be held liable for damage or injury caused by improper use of the equipment.
The rowing machine has been designed in accordance with the
oughly every months. Pay particular attention to the tightness of bolts and nuts.
Instruct persons using the equipment (in particular children) on
possible sources of danger during exercising.
Before beginning your program of exercise, consult your doctor
latest standards of safety. Any features which may have been a possible cause of injury have been avoided or made as safe as possible.
The unit complies with the DIN EN 957 - 1/7, H. It is therefore
to ensure that you are fit enough to use the equipment. Base your program of exercise on the advice given by your doctor. Incorrect or excessive exercise may damage your health.
Any interference with parts of the product that are not described
unsuitable for therapeutic use.
Incorrect repairs and structural modifications (e.g. removal or
replacement of original parts) may endanger the safety of the user.
Damaged components may endanger your safety or reduce the
within the manual may cause damage, or endanger the person using this machine. Extensive repairs must only be carried out by KETTLER service staff or qualified personnel trained by KETTLER.
To ensure that the safety level is kept to the highest possible
lifetime of the equipment. For this reason, worn or damaged parts should be replaced immediately and the equipment taken out of use until this has been done. Use only original KETTLER spare parts.
standard, determined by its construction, this product should be serviced regularly (once a year) by specialist retailers.

sleeves of the hydraulic absorbers and the rowing levers. Care should be taken that the oil does not drip onto the floor!
After a longer period of disuse, the hydraulic absorbers may not

Handling the equipment

Before using the equipment for exercise, check carefully to en-
sure that it has been correctly assembled.
Do not set the equipment up in rooms which are frequently used
or close to doors, entries etc.
It is not recommended to use or store the apparatus in a damp
room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc.). This may cause corrosion.
The rowing machine must be set up on an even impact-resistant
achieve their best performance at once. Before beginning exercising or after a period of disuse, it is recommended to activate the absorbers by several pumping movements.
Do not use corrosive or abrasive materials to clean the equip-
ment. Ensure that such materials are not allowed to pollute the environment.
To operate correctly, the pulse function requires a minimum volt-
base. To absorb the vibrations, lay a straw or rubber mat under the machine.
The product is designed for use by adults and children should

age of 2,7 volts.

Please ensure that liquids or perspiration never enter the ma-
not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly.
A few drops of viscous oil should be applied to the bearing
chine or the electronics.
Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.
When training intensivly shock absorbers may become very hot.
Please avoid contact and do not touch the shock absorbers after training.
Instructions for Assembly
Ensure that you have received all the parts required (see check The equipment must be assembled with due care by an adult

list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings carefully
person. If in doubt call upon the help of a second person, if possible technically talented.
The fastening material required for each assembly step is shown
and carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters.
Please note that there is always a danger of injury when work-
in the diagram inset. Use the fastening material exactly as instructed. The required tools are supplied with the equipment.
Bolt all the parts together loosely at first, and check that they
ing with tools or doing manual work. Therefore please be careful when assembling this machine.
Ensure that your working area is free of possible sources of dan-
ger, for example dont leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!
have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced.
For technical reasons, we reserve the right to carry out prelimi-
nary assembly work (e.g. addition of tubing plugs).
List of spare parts page 22 - 23
When ordering spare parts, always state the full article number, spare-part number, the quantity required and the inspection number stamped on the back. Example order: Art. no. 07977-900 / spare-part no. 33100100/ 2 pieces / inspection no.. Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this should be clearly stated on the order by adding the words with fastening material. KETTLER GB Ltd. KETTLER House, Merse Road North Moons Moat Redditch, Worcestershire B98 9HL KETTLER International Inc. 1355, London Bridge Road USAVirginia Beach, Virginia 23450 www.kettler.net

Instructions de montage

Lire attentivement les prsentes instructions avant le montage et la premire utilisation de l'appareil. Elles contiennent des renseignements importants relatifs la scurit des personnes ainsi qu' l'emploi et l'entretien du rameur. Conserver soigneusement les dites instructions pour d'ventuels renseignements ainsi que pour effectuer l'entretien de l'appareil ou commander des pices de rechange. Pour votre scurit