T E C H N O L O G Y

Memory Module Specification

KHX1600C9D3B1/2G

2GB 256M x 64-Bit DDR3-1600MHz CL9 240-Pin DIMM

DESCRIPTION:

This document describes Kingston's 256M x 64-bit 2GB (2048MB) DDR3-1600MHz CL9 SDRAM (Synchronous DRAM) memory module, based on sixteen 128M x 8-bit DDR3 FBGA components. This module has been tested to run at DDR3-1600MHz at a low latency timing of 9-9-9-27 at 1.7V to 1.9V. The SPD is programmed to JEDEC standard latency DDR3-1333MHz timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers and requires +1.5V. The JEDEC standard electrical and mechanical specifications are as follows:

FEATURES:

JEDEC standard 1.5V 0.075V Power Supply VDDQ = 1.5V 0.075V 667MHz fCK for 1333Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 5,6,7,8,9,10 Posted CAS Programmable Additive Latency: 0, CL - 2, or CL - 1 clock Programmable CAS Write Latency(CWL) = 7(DDR3-1333) 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address 000 only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower then TCASE 85C, 3.9us at 85C < TCASE. 95C Asynchronous Reset PCB : Height 1.180 (30.00mm), double sided component

PERFORMANCE:

CL(IDD) Row Cycle Time (tRCmin) Refresh to Active/Refresh Command Time (tRFCmin) Row Active Time (tRASmin) Power UL Rating Operating Temperature Storage Temperature 9 cycles 49.5ns (min.) 110ns 36ns (min.) 1.800 W (operating) 94 V - 0 0o C to 85o C -55o C to +100o C
Document No. 4805601-001.A00

05/21/10

Page 1

ValueRAM

MODULE DIMENSIONS:

Units: millimeters

133.35
18.80 15.80 11.00 8.00 0.00

w/ Heatsink Assembly

Page 2

kingston.com/hyperx

Kingston HyperX blu
For entry-level gamers or PC enthusiasts.
Kingston Technology, the worlds independent memory leader, proudly offers HyperX memory for gamers and PC enthusiasts. HyperX modules are specifically engineered and tested for higher speeds and lower latencies. HyperX is available in five distinct desktop product lines and one notebook product line to meet the specific needs of everyone from the entry-level gamer to the seasoned pro. Kingston HyperX blu is ideal for the entry-level gamer or PC enthusiast. It features a new streamlined clipless design. Its heatspreaders provide thermal performance at an improved price point. HyperX blu is available in DDR2 and DDR3 and in speeds up to 1600MHz.
Capacities 1GB2GB (with 2GB and 4GB kits) Frequency speed DDR2: 800MHz DDR3: 1333MHz1600MHz Operating temperature 0 C to 85 C Storage temperature -55 C to 100 C Dimensions 133.35mm x 30.00mm DDR2 and DDR3 Available in a variety of CAS Latencies JEDEC standard 1.5V 0.075V

r m s.g ste sy

sy ste
Like all Kingston memory modules, HyperX blu is 100% tested and backed by a lifetime warranty, 24/7 free technical support and legendary Kingston reliability.
2010 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley, CA 92708 USA. All rights reserved. All trademarks and registered trademarks are the property of their respective owners.
Printed in the USA MKD-150

Features:

New streamlined clipless design Compatible tested for use with all popular brands of motherboards Reliable 100% tested Easy to install Guaranteed lifetime warranty, 24/7 live technical support

Kingston Part Numbers:

DDR3 KHX1333C9D3B1K2/2G KHX1333C9D3B1K2/4G KHX1600C9D3B1/2G KHX1600C9D3B1K2/2G KHX1600C9D3B1K2/4G KHX1600C9D3B1K2/4GX DDR2 KHX6400D2B1/1G KHX6400D2B1/2G KHX6400D2B1K2/2G KHX6400D2B1K2/4G

memory