Taking a video

Press the Shutter button completely down and release. To stop recording, press and release the Shutter button again.
Reviewing the picture or video just taken
After you take a picture or video, the LCD displays a quickview for approximately 5 seconds.
Tag a picture/video for email or as a favorite, or tag a picture for print. If you press no buttons, the picture/ video is saved.
Delete Play a video. adjust the volume on your Video Out device.)
To review pictures and videos anytime, see page 8.
Understanding picture-taking icons
In capture modeno buttons pressed
Self-timer Date stamp Album Flash mode Picture size Pictures/time remaining Storage location Zoom: wide telephoto digital Focus Zone White balance ISO speed Low battery Camera mode Exposure compensation
In capture modeshutter pressed halfway
Auto Exposure/ Auto Focus warning

Low battery

Exposure compensation
Using the auto-focus framing marks (to take pictures)
When using the LCD as a viewfinder, framing marks indicate the camera focus area. The camera attempts to focus on foreground subjects, even if the subjects are not centered in the scene. 1 Press the Shutter button halfway. When the framing marks turn green, focus is accomplished.

Framing marks

Center focus Center wide focus Side focus Center and side focus Left and right focus
2 If the camera is not focusing on the desired subject (or if the framing marks disappear), release the Shutter button, recompose the scene, and repeat step 1. 3 Press the Shutter button completely down to take the picture. NOTE: Framing marks do not appear in Landscape or Video mode. When you use Focus Zone (see page 22) and set Center Zone, the framing marks are fixed at Center Wide.

Using the flash

Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows.
Press the button repeatedly to scroll through flash modes (see Flash modes below). The current flash mode is shown in the LCD status area.

Flash-to-subject distance Zoom position Wide angle Telephoto Flash modes Auto Flash Fill Flash fires When the lighting conditions require it. Every time you take a picture, regardless of the lighting conditions. Use when the subject is in shadow or is backlit (when the light is behind the subject). Once, so the subjects eyes become accustomed to the flash, then fires again when the picture is taken. (If the lighting conditions require flash but do not require Red-eye reduction, the flash may fire only once.) Never Flash distance 211.5 ft (0.63.5 m) @ ISO 6.6 ft (0.62.0 m) @ ISO 140

Redeye Off

Reviewing pictures and videos on your camera
Press the Review button to view and work with your pictures and videos.

Videos: OK Play/pause.

for previous/next. Review. (Press again to exit.)
Rewind to beginning (during playback). Next picture/video (during playback).
To save battery power, use an optional Kodak EasyShare dock or Kodak 3-volt AC adapter. (See www.kodak.com/go/c533accessories or www.kodak.com/go/c503accessories.) NOTE: Pictures taken at the 4.4 MP (3:2) quality setting are displayed at a 3:2 aspect ratio with black bars at the top of the screen. A videos duration is displayed at the top of the LCD.
Magnifying a picture during review
W/T magnify 1X - 8X. view other parts of the picture. OK return to 1X.
Viewing multi-up (thumbnails) during review
view multi-up thumbnails. view previous/next row of thumbnails. view previous/next thumbnail. OK view single picture.
Understanding review icons

Pictures

Print tag/number of prints Favorite tag Email tag Picture number Image storage location
Protected Scroll arrows Review mode

Videos

Video length Favorite tag Email tag Video number Image storage location Playback time counter Volume control (for Video Out device) Date/Time Scroll arrows Review mode

view single picture.

Deleting pictures and videos during review
Press Review. for previous/next. Press Delete. Follow the screen prompts.
Using the undo delete feature If you accidentally delete a picture, you can use Undo Delete to retrieve it. This feature is only available immediately after you delete a picture. NOTE: You cannot use Undo Delete if your picture is larger than 20 MB. Protecting pictures and videos from deletion
Press Review. for previous/next. Press Menu. Press to highlight Protect, then press OK.
The picture or video is protected and cannot be deleted. The Protect icon the protected picture or video. Press the Menu button to exit the menu.

appears with

Transferring and printing pictures
CAUTION: Install EasyShare software before connecting the camera to the computer. Failure to do so may cause the software to load incorrectly.

Installing the software

1 Close all software applications that are open on your computer (including anti-virus software). 2 Place the EasyShare software CD into the CD-ROM drive. 3 Load the software: Windows OSif the install window does not appear, choose Run from the Start menu and type d:\setup.exe where d is the drive letter that contains the CD. Mac OS Xdouble-click the CD icon on the desktop, then click the Install icon. 4 Follow the on-screen instructions to install the software. Windows OSselect Complete to automatically install the most commonly used applications, or Custom to choose the ones you wish to install. Mac OS Xfollow the on-screen instructions. 5 If prompted, restart the computer. If you turned off anti-virus software, turn it back on. See the anti-virus software manual for details. For information on the software applications included on the EasyShare software CD, click the Help button in EasyShare software.
Transferring pictures with the USB cable

Turn off camera.

Connect USB cable (U-8). Turn on camera.
Kodak EasyShare software opens on your computer and prompts you through the transfer process.
NOTE: Visit www.kodak.com/go/howto for an online tutorial on connecting.
Also available for transferring
You can also use these Kodak products to transfer your pictures and videos.
Kodak EasyShare camera dock, Kodak EasyShare printer dock (see page 15) Kodak multi-card reader, Kodak SD multimedia card reader-writer
Purchase these and other accessories at a dealer of Kodak products or www.kodak.com/go/c533accessories or www.kodak.com/go/c503accessories.

Printing pictures

Printing with a Kodak EasyShare printer dock
Dock your camera to the Kodak EasyShare printer dock and print directlywith or without a computer. Purchase this and other accessories at a dealer of Kodak products or visit www.kodak.com/go/c533accessories or www.kodak.com/go/c503accessories.
Direct printing with a PictBridge enabled printer
Your camera is compatible with PictBridge technology, so you can print directly to PictBridge enabled printers. You need:
I Camera with fully charged batteries I PictBridge enabled printer I USB cable (may be sold separately)
Connecting the camera to a PictBridge enabled printer 1 Turn off the camera and printer. 2 Connect the appropriate USB cable from the camera to the printer. (See your printer user guide or visit www.kodak.com/go/c533accessories or www.kodak.com/go/c503accessories. Printing from a PictBridge enabled printer 1 Turn on the printer. Turn on the camera. The PictBridge logo is displayed, followed by the current picture and menu. (If no pictures are found, a message is displayed.) If the menu interface turns off, press any button to redisplay it. 2 Press to choose a printing option, then press the OK button.

to choose a picture. Choose the number of copies.

Current Picture Press

Tagged Pictures If your printer is capable, print pictures that you tagged for printing and choose a print size. Index Print All Pictures Image Storage Print thumbnails of all pictures. This option requires one or more sheets of paper. If the printer is capable, choose a print size. Print all pictures in internal memory, on a card, or in Favorites. Choose the number of copies. Access internal memory, a card, or Favorites.
NOTE: During direct printing, pictures are not permanently transferred or saved to the computer or printer.
Disconnecting the camera from a PictBridge enabled printer 1 Turn off the camera and printer. 2 Disconnect the USB cable from the camera and the printer.
Using a printer that is not PictBridge enabled
For details on printing pictures from your computer, click the Help button in EasyShare software.

Ordering prints online

Kodak EasyShare Gallery (www.kodakgallery.com) is one of the many online print services offered in the Kodak EasyShare software. You can easily:

I I I I

Upload your pictures. Edit, enhance, and add borders to your pictures. Store pictures, and share them with family and friends. Order high-quality prints, photo greeting cards, frames, and albumsand have them delivered to your door.
Printing from an optional SD/MMC card
Automatically print tagged pictures when you insert your card into a printer with an SD/MMC card slot. See your printer users guide for details. Make prints at an SD/MMC card-capable Kodak picture maker/picture kiosk. (Contact a location prior to visiting. See www.kodak.com/go/picturemaker.) Take the card to your local photo retailer for professional printing.
Dock compatibility for your camera

Kodak EasyShare dock

I printer dock plus series 3 I printer docks and camera docks

Docking configuration

Custom dock insert Dock

series 3

I printer dock I printer dock plus I printer dock 6000 I camera dock 6000 Kodak dock adapter kit D-22 Custom dock insert
I printer dock 4000 I camera dock II I LS420, LS443 camera dock

Not compatible

Purchase camera docks, printer docks, and other accessories at a dealer of Kodak products or www.kodak.com/go/c533accessories or www.kodak.com/go/c503accessories.
Doing more with your camera

Using optical zoom

Use optical zoom to get up to 3X closer to your subject. Optical zoom is effective when the lens is no closer than 24 in. (60 cm) to the subject or 5 in. (12.7 cm) in Close-up mode. You can change optical zoom before (but not during) video recording. 1 Use the viewfinder or LCD to frame your subject. 2 Press Telephoto (T) to zoom in. Press Wide Angle (W) to zoom out. The zoom indicator shows zoom status. Zoom indicator

Using the self-timer

Place camera on a tripod or flat surface. In any Still mode, press Once for a 10-second delay (so you have time to get into the scene) Again for a 2-second delay (for a steady, auto-shutter release on a tripod) Again for 2-shot (one picture taken after 10 seconds and another picture taken 8 seconds later)
Compose the scene. Press the Shutter button halfway, then completely down.
To cancel the Self-timer before the picture is taken, press the Self-timer button. Use the same procedure to take a video, but:
Turn the Mode dial to Video
Press the Shutter button completely down. NOTE: The video stops when no storage space remains. Only the 2- and 10-second options are available in video mode.

Using burst

Option Description Camera takes up to 3 pictures (3 per second) while the Shutter button is pressed. Burst
First 3 pictures are saved.
Purpose Capture an expected event. Example: A person swinging a golf club.
1 In most Still modes, press the Burst button repeatedly to choose an option. 2 Press the Shutter button halfway to focus and set exposure. 3 Press the Shutter button completely down and hold it to take pictures. The camera stops taking pictures when you release the Shutter button, when the pictures are taken, or when there is no more storage space. NOTE: During quickview, you can delete all pictures in the burst series. To delete selectively, do so in Review (see page 10).
Changing picture-taking settings
You can change settings to get the best results from your camera: 1 Press the Menu button. 2 Press to highlight a setting, then press the OK button. 3 Choose an option, then press the OK button. 4 Press the Menu button to exit.
NOTE: Some settings are unavailable in some modes.

Setting Options

-2.0 to +2.0 (in 0.5 increments) Exposure Compensation Control how much light enters the camera. This setting remains until you turn the Mode dial. Picture Size Choose a picture resolution. This setting remains until you change it. 5.0 MP (default)for printing up to 20 x 30 in. (51 x 76 cm); pictures are highest resolution and largest file size. 4.4 MP (3:2)ideal for printing 4 x 6 in. (10 x 15 cm) prints without cropping. Also for printing up to 20 x 30 in. (51 x 76 cm). 3.1 MP for printing up to 20 x 30 in. (51 x 76 cm); pictures are medium resolution with smaller file size. 2.1 MPfor printing up to 11 x 14 in. (28 x 36 cm); pictures are medium resolution with smaller file size. 1.1 MPfor printing 4 x 6 in. (10 x 15 cm), emailing, Internet, screen display, or for conserving space. Auto (default)automatically corrects white balance. Ideal for general picture taking. Daylightfor pictures in natural lighting. Tungstencorrects the orange cast of household light bulbs. Ideal for indoor pictures under tungsten or halogen lighting without flash. Fluorescentcorrects the green cast of fluorescent lighting. Ideal for indoor pictures under fluorescent lighting without flash.

See Customizing your camera on page 24. 640 x x 240 Available only in Video mode. Continuous (default) 5 seconds 15 seconds 30 seconds Available only in Video mode.
Setup Menu Choose additional settings. Video Size

Video Length

Customizing your camera
Use Setup to customize your camera settings. 1 In any mode, press the Menu button. 2 Press 3 Press to highlight Setup , then press the OK button.
to highlight the setting you wish to change, then press the OK button.
4 Choose an option, then press the OK button. 5 Press the Menu button to exit. NOTE: These settings remain until you change them.
Setting Return to previous menu. Liveview Change liveview default to on or off. On (default) Off Options
NOTE: In some modes, the LCD turns on even if the liveview option is set to Off. (To turn the LCD on/off any time, press the LCD/Info button.)
Camera Sounds Choose to enable or disable sound effects. All On (default)applies a sound effect to camera functions. Shutter Onlyapplies a sound effect only when you press the Shutter button. All Offdisables sound effects.
Auto Power Off 10 minutes Choose inactivity time until camera turns off. 5 minutes 3 minutes (default) 1 minute Date & Time See page 2.
Video Out NTSC (default)used in North America and Japan; most common format. Choose the regional setting that lets you connect the camera to a television or other PALused in Europe and China. external device (see page 27). Orientation Sensor Orient pictures so that they are displayed with the correct side up. Date Stamp Imprint the date on pictures. Video Date Display Display Date/Time at the start of video playback. On (default) Off Off (default) YYYY MM DD, MM DD YYYY, DD MM YYYY YYYY MM DD (default) MM DD YYYY, DD MM YYYY, YYYY MM DD H:M, MM DD YYYY H:M, DD MM YYYY H:M, None See page 2.

Language Format

Memory Carddeletes everything on the card; formats the card. CAUTION: Cancelexits without making a change. Formatting deletes all Internal Memorydeletes everything in pictures/videos, including internal memory including email addresses, those that are protected. album names, and favorites; formats the Removing a card during internal memory.

formatting may damage the card.
About View camera information.

Running a slide show

Use the Slide Show to display your pictures/videos on the LCD. To run a slide show on a television or on any external device, see page 27. To save battery power, use an optional Kodak 3V AC adapter. (Visit www.kodak.com/go/c533accessories or www.kodak.com/go/c503accessories.)

Starting the slide show

1 Press the Review button, then press the Menu button. 2 Press to highlight Slide Show , then press the OK button.
3 Press to highlight Begin Show, then press the OK button. Each picture and video is displayed once. To interrupt the Slide Show, press the OK button.
Changing the slide show display interval
The default interval setting displays each picture for 5 seconds. You can set the display interval from 3 to 60 seconds. 1 On the Slide Show menu, press button. 2 Select a display interval. To scroll through the seconds quickly, press and hold 3 Press the OK button. The interval setting remains until you change it. to highlight Interval, then press the OK
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated. 1 On the Slide Show menu, press to highlight Loop, then press the OK button.
2 Press to highlight On, then press the OK button. The slide show repeats until you press the OK button or until battery power is exhausted. The Loop feature remains until you change it.
Displaying pictures and videos on a television
You can display pictures/videos on a television, computer monitor, or any device equipped with a video input. (Image quality on a television screen may not be as good as on a computer monitor or when printed.) NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct (see Video Out on page 25). The slide show stops if you connect a cable while the slide show is running. 1 Connect an audio/video cable from the camera USB, A/V Out port to the television video-in port (yellow) and audio-in port (white). See your television users guide for details. 2 Review pictures/videos on the television.

Cropping pictures

Press Review. for previous/next. Press Menu, choose Crop , then press OK. to move the crop box.

Thirdtransfer to your computer
When you transfer the tagged pictures or videos to your computer, EasyShare software opens and categorizes your pictures in the appropriate album. See EasyShare software Help for details.
Tagging pictures/videos for albums
Use the Album feature in Review mode to tag the pictures/videos in your camera with album names. Firston your computer Use EasyShare software to create albums on your computer, then copy up to 32 album names to the cameras internal memory. See EasyShare software Help for details. Secondon your camera 1 Press the Review button, then locate the picture or video. 2 Press the Menu button. 3 Press 4 Press to highlight Album , then press the OK button.
to highlight an album folder, then press the OK button.
To add other pictures to the same album, press to scroll through the pictures. When the picture you want is displayed, press the OK button. To add the pictures to more than one album, repeat step 4 for each album. The album name appears with the picture. A plus (+) after the album name means the picture was added to more than one album. To remove a selection, highlight an album name and press the OK button. To remove all album selections, select Clear All. Thirdtransfer to your computer When you transfer the tagged pictures/videos to your computer, EasyShare software opens and categorizes your pictures/videos in the appropriate album folder. See EasyShare software Help for details.

Sharing your pictures

Press the Share button to tag your pictures and videos. When they are transferred to your computer, you can share them. Use the Share button:
Any time. (The most recent picture/video taken is then displayed.)
Just after you take a picture/video, during quickview. After pressing the Review button.
Tagging pictures for printing
1 Press the Share button. Press 2 Press to highlight Print to locate a picture. , then press the OK button.*
3 Press to select the number of copies (0-99). Zero removes the tag for that picture. Optional: You can apply a print quantity to other pictures. Press to locate a picture. Press to change the print quantity. Repeat until the desired print quantity is applied to pictures. 4 Press the OK button. The Print icon appears in the status area. 5 Press the Share button to exit the menu. * To tag all pictures in the storage location, highlight Print All, press the OK button, then indicate the number of copies. Print All is not available in quickview. To remove print tagging for all pictures in the storage location, highlight Cancel Prints, then press the OK button. Cancel Prints is not available in quickview. Printing tagged pictures When you transfer the tagged pictures to your computer, Kodak EasyShare software print screen opens. For details, click the Help button in EasyShare software. For more information on printing from your computer, printer dock, PictBridge enabled printer, or card, see page 12. NOTE: For the best 4 x 6 in. (10 x 15 cm) prints, set the camera to the 4.4 MP (3:2) print quality setting. (See Picture Size on page 20.)

NOTE: The camera holds a limited number of favorites. Use Camera Favorites in the EasyShare software to customize the size of your camera Favorites section. Videos tagged as favorites remain in the Favorites folder in EasyShare software. For details, click the Help button in EasyShare software.

Optional settings

In Favorites mode, press the Menu button to access optional settings.
Slide Show (page 26) Multi-up (page 8) Remove all favorites (page 34) Setup Menu (page 24)
NOTE: Pictures taken at the 4.4 MP (3:2) quality setting are displayed at a 3:2 aspect ratio with black bars at the top of the screen. Removing all favorites from your camera 1 Turn the Mode dial to Favorites 2 Press the Menu button. 3 Highlight Remove Favorites , then press the OK button. All pictures stored in the Favorites section of internal memory are removed. Favorites are restored the next time you transfer pictures to the computer. 4 Press the Menu button to exit the menu. Preventing favorites from transferring to the camera 1 Open Kodak EasyShare software. Click the My Collection tab. 2 Go to the Albums view. 3 Click the Camera Favorites Album for your camera. 4 Click Remove Album. The next time you transfer pictures from your camera to the computer, use the Camera Favorites Wizard/Assistant to either recreate your Camera Favorites Album or to turn off the Camera Favorites feature. Printing and emailing favorites 1 Turn the Mode dial to Favorites 2 Press the Share button. 3 Highlight Print or Email , then press the OK button. NOTE: Favorites that were taken on this camera (not imported from another source) are good for prints up to 4 x 6 in. (10 x 15 cm). Press to locate a picture.

Troubleshooting

For step-by-step product support, visit www.kodak.com/go/c533support or www.kodak.com/go/c503support and select Interactive Troubleshooting & Repairs.

Camera problems

If. Camera does not turn on. Camera does not turn off. Try one or more the following
I Install new batteries (page 1). I Charge rechargeable batteries. I Remove the battery, then reinsert or replace it.
Pictures remaining I The camera is operating normally. Continue taking pictures. number does not decrease after taking a picture. Short battery life I Wipe the contacts with a clean, dry cloth (page 51) before loading batteries in the camera. with Kodak Ni-MH rechargeable I Use the Refresh feature on your camera dock series 3 or printer dock series 3. digital camera batteries. Stored pictures are I Retake picture. Do not remove card while the ready light is blinking. Keep rechargeable batteries charged. corrupted. In Review mode, I Check the image storage location setting (page 23). you do not see a picture (or the expected picture) on the LCD screen.

Date and time have been reset
I Reset the clock (page 2).
No address book in I Create and copy address book from computer. See the Kodak EasyShare software Help. camera (Connect with computer to import address book) No album names in camera (Connect with computer to import album names) High camera temperature. (Camera will be turned off.)
I Create and copy album names from computer. See the Kodak

EasyShare software Help.

I Leave the camera off until its cool to the touch, then turn it back on.
If. Can only mark picture or video with 32 album names. Only the first 32 album names will be saved Unrecognized file format Try one or more of the following
I Delete one or more album names associated with the image

(page 29).

I Transfer the picture to the computer (page 12), or delete it (page 10).
Camera error I Turn camera off, then back on. #XXXX. See users guide.

Camera

Getting help

Helpful links

Email, write, or phone customer support www.kodak.com/go/contact
Get support for your product (FAQs, www.kodak.com/go/c533support or troubleshooting information, arrange for repairs, www.kodak.com/go/c503support etc.) Purchase camera accessories (camera docks, printer docks, lenses, cards, etc.) Download the latest camera firmware and software See online demonstrations of your camera www.kodak.com/go/c533accessories or www.kodak.com/go/c503accessories www.kodak.com/go/c533downloads or www.kodak.com/go/c503downloads www.kodak.com/go/howto

Software

Get information on EasyShare software www.kodak.com/go/easysharesw (or click the Help button in EasyShare software)
Get help with the Windows operating system and www.kodak.com/go/pcbasics working with digital pictures
Get support for other cameras, software, accessories www.kodak.com/go/support Get information on Kodak EasyShare printer docks Get information on Kodak inkjet products Optimize your printer for truer, more vibrant colors Register your camera www.kodak.com/go/printerdocks www.kodak.com/go/inkjet www.kodak.com/go/onetouch www.kodak.com/go/register
Telephone customer support
If you have questions concerning this product, contact your customer support representative and have this information available:
I Operating system I Processor speed (MHz) I Computer model I Amount of memory (MB) I Exact error message you received I Version of Kodak EasyShare software CD I Camera serial number
Australia Austria Belgium Brazil Canada China Denmark Ireland Finland France Germany Greece Hong Kong India Italy Japan Korea

Operating temperature 32-104F (0-40C)

Storage capacities

Actual storage capacity varies depending on subject composition, card brand, and other factors. You may be able to store more or fewer pictures and videos. Favorites take up additional space in internal memory.

Picture storage capacity

Number of pictures 5.0 MP Internal memory 16 MB SD/MMC 32 MB SD/MMC 64 MB SD/MMC 128 MB SD/MMC 256 MB SD/MMC 512 MB SD/MMC 1 GB SD/MMC 4.4 MP (3:2) 3.1 MP 2.1 MP 1.1 MP 1482 2966

Video storage capacity

Minutes/seconds of video VGA (640 x 480) Internal memory 16 MB SD/MMC 32 MB SD/MMC 64 MB SD/MMC 128 MB SD/MMC 256 MB SD/MMC 512 MB SD/MMC 1 GB SD/MMC 14 sec. 20 sec. 39 sec. 1 min. 18 sec. 2 min. 36 sec. 5 min. 55 sec. 11 min. 49 sec. 23 min. 39 sec. QVGA (320 x 240) 34 sec. 50 sec. 1 min. 39 sec. 3 min. 18 sec. 6 min. 24 sec. 14 min. 29 sec. 28 min. 57 sec. 57 min. 57 sec.
NOTE: If you are using a 1 GB or larger memory card, video recording may stop automatically after 80 mins. Press the Shutter button to start a new video file.
Important safety instructions
CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Do not expose this product to liquid, moisture, or extreme temperatures. Kodak AC adapters and battery chargers are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support.

Using this product

The use of an accessory attachment that is not recommended by Kodak, such as an AC adapter, may cause fire, electric shock, or injury. Use only a USB-certified computer. Contact your computer manufacturer if you have questions. If using this product in an airplane, observe all instructions of the airline.
Battery safety and handling
CAUTION: When removing the battery, allow it to cool; it may be hot.

I I I I I I

Use only batteries approved for this product to avoid risk of explosion. Keep batteries out of the reach of children. Do not allow batteries to touch metal objects, including coins. Otherwise, a battery may short circuit, discharge energy, become hot, or leak. Do not disassemble, install backward, or expose batteries to liquid, moisture, fire, or extreme temperature. Do not charge non-rechargeable batteries. Remove the battery when the product is stored for an extended period of time. In the unlikely event that battery fluid leaks inside the product, contact Kodak customer support. In the unlikely event that battery fluid leaks onto your skin, wash immediately with water and contact your local health provider. For additional health-related information, contact your local Kodak customer support. Dispose of batteries according to local and national regulations.

Limited warranty coverage
This limited warranty will be honored only within the geographical location that Kodak digital cameras and accessories were purchased. Kodak will REPAIR or REPLACE Kodak EasyShare digital cameras and accessories if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Such repair service will include all labor as well as any necessary adjustments and/or replacement parts. Such repair or replacement is the sole remedy under this warranty. If replacement parts are used in making repairs, these parts may be remanufactured, or may contain remanufactured materials. If it is necessary to replace the entire product, it may be replaced with a remanufactured product.

Limitations

Request for Warranty service will not be accepted without proof of date of purchase, such as a copy of the original dated Kodak EasyShare digital camera or accessory sales receipt. (Always keep the original for your records.) This warranty does not apply to the battery(s) used in digital cameras or accessories. This warranty does not cover circumstances beyond Kodaks control, nor problems caused by failure to follow the operating instructions in the Kodak EasyShare digital cameras and accessories Users Guides. This warranty does not apply when failure is due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with incompatible accessories or attachments, failure to follow Kodaks operation, maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters and cables), or claims made after the duration of this warranty. 52
Kodak makes no other express or implied warranty for this product. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the purchase date. The option of replacement is Kodaks only obligation. Kodak will not be responsible for any special, consequential or incidental damages resulting from the sale, purchase, or use of this product, regardless of the cause. Liability for any special, consequential or incidental damages (including but not limited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services, or claims of your customers for such damages resulting from the purchase, use or failure of the product), regardless of cause or for breach of any written or implied warranty is expressly disclaimed and excluded herefrom.

Your rights

Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction.

Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.

Regulatory compliance

FCC compliance and advisory
Kodak EasyShare C533/C503 zoom digital camera This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation.

Australian C-Tick

Canadian DOC statement
DOC Class B ComplianceThis Class B digital apparatus complies with Canadian ICES-003. Observation des normes-Class BCet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.
Waste Electrical and Electronic Equipment labeling
In the European Union, do not discard this product as unsorted municipal waste. Contact your local authorities or go to www.kodak.com/go/recycle for recycling program information.

Korean Class B ITE

English translation: As this equipment has obtained EMC registration for household use, it can be used in any area including residential areas.

VCCI Class B ITE

English translation: This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.