Kodak CX6330 Digital Camera, size: 7.2 MB
Part Number: SD-2GB-4489
Here you can find all about Kodak CX6330, for example manual and battery, firmware, software, specs, memory card, driver. You can also write a review.
[ Report abuse or wrong photo | Share your Kodak CX6330 photo ]
Test Video 4 from Kodak CX6330 digital camera
User reviews and opinions
|kshemankar||12:12pm on Wednesday, November 3rd, 2010|
|Well, I recently bought this camera as a simple point and shoot for a relative that needed a better camera than the one they had. Overall. Well, I recently bought this camera as a simple point and shoot for a relative that needed a better camera than the one they had. Overall.|
|widdonckict||11:01pm on Wednesday, October 20th, 2010|
|Fantastic Pictures, Fragile Battery Door This camera takes the best pictures of any digital camera I have ever used! Especially in low light.|
|wrdlbrnft||10:27am on Monday, October 11th, 2010|
|Kodak EASYSHARE CX6330 Format Compact Price (street) Also known as Release Status Discontinued Max resolution 2032 x 1524 Low resolution Unknown Image...|
|ph_il||10:02am on Saturday, October 9th, 2010|
|Overall, it takes good pictures, easy downloading. The select button is terrible.|
|ozmeb||2:41pm on Wednesday, June 16th, 2010|
|Great Camera My first digital camera, so far so good, after 6 months. Great pictures with excellent colour quality. Good sports pictures.|
|OOoMyGod||5:46am on Monday, May 31st, 2010|
|I´ve been using this Kodak 6330 zoom camera for the last 6 months and so far I find it a pretty good camera in its 3 mgpixel group. This is overall a great camera. Great deal for a clean looking 3.1 megapixel! This camera is the easiest to use.|
|Cellin||5:03pm on Saturday, May 1st, 2010|
|We had ours about 6 months when it got droppe... Small, very easy to use Dont drop it, it will cost more to fix than its worth and EATS batteries This camera has a lot of features for the price and the photos are good enough for most web and...|
|Aylieff-Sansom||6:56pm on Thursday, April 29th, 2010|
|easy to use eats batteries like peanuts good picture,design,tecn.services,packet and good price i love smaller machine and more pixels in tft|
|Phluph||10:48pm on Wednesday, April 14th, 2010|
|This was my first digi camera,which I bought 2 years ago and it still works perfectly. We had ours about 6 months when it got dropped.|
|wilsho||3:18pm on Saturday, April 3rd, 2010|
|Good optical zoom ; easy to use ; AA batteries a plus.Videos/sound of house for insurance Dust can get inside the body, viewfinder, behind the lens Size, Video mode with sound, price. Time it takes for the camera to power and be ready for photos.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Angle (W) to zoom out. The lens extends or retracts. The viewfinder or camera screen displays the zoomed image. 3 Press the Shutter button to take the video.
Changing Optional Video Settings
In Video mode, press the Menu button to access optional video-taking settings. Image Storage (page 11) Album (page 34) Setup Menu (page 51)
Use the Set Album (Video) feature to pre-select album names before you take videos. Then, all the videos you take are tagged with those album names.
1 In Video mode, press the Menu button. 2 Highlight Album , then press the OK
button. to highlight an album name, then press the OK button. Repeat to add videos to more than one album. Selected albums are noted with a check mark. 4 To remove a selection, highlight an album name and press the OK button. To remove all album selections, select Clear All. 5 Highlight Exit, then press the OK button. Your selections are saved. If you turn on Liveview, your album selection is displayed on the screen. A plus (+) after the album name means more than one album is selected. 6 Press the Menu button to exit the menu.
When you transfer the tagged videos to your computer, the Kodak EasyShare software opens and categorizes your videos in the appropriate album folder. See the Kodak EasyShare software Help for details. 34
Putting Yourself in the Video
The Self Timer creates a 10-second delay between the time you press the Shutter button and the time video recording begins.
2 Turn the Mode dial to Video
, then press the Self Timer button. 3 Press to highlight a Video Length option, then press the OK button: Unlimitedrecords until you stop recording or until storage is full. Secondsrecords for the specified time or until storage is full. NOTE: If the current storage location does not have adequate space, some video length options are not displayed. (See page 95 for video storage capacities.)
4 Compose the scene, then press the Shutter
button completely down. Move so that you are in the scene. The Self Timer/Video light blinks slowly for 8 seconds (then quickly for 2 seconds) before the video begins recording. It then stays on while recording. To cancel the Self Timer before the video is taken, press the Self Timer button. (The Self Timer setting remains active.) To turn off the Self Timer, press the Self Timer button twice. 35
Reviewing Pictures and Videos
Press the Review button to view and work with your pictures and videos. To save battery power, place your camera in the optional Kodak EasyShare camera dock 6000 to review pictures and videos (see page 63). Remember, press the Shutter button to take a picture anytimeeven in Review.
to highlight an option: PICTURE or VIDEOcopies the current picture or video. EXITreturns to the Review menu. ALLcopies all pictures and videos from your selected storage location to the other location.
4 Press the OK button.
A progress bar monitors the copy process until complete. (For information on picture numbering, see page 96.) NOTE: m Pictures and videos are copied, not moved. To remove pictures and videos from the original location after they are copied, delete them (see page 39). m Tags that you applied for print, email, and Favorites are not copied. Protection settings are not copied. To apply protection to a picture or video, see page 41.
Displaying Video Date
To display the capture date and time before the video starts: 1 Press the Review button, then press the Menu button. 2 Press to highlight Video Date Display , then press the OK button.
to highlight an option, then press the OK button. 4 Press the Menu button to exit the menu. The capture date and time appear during video playback on the camera. This setting remains until you change it.
Viewing Picture/Video Information
1 Press the Review button, then press the Menu button. 2 Press to highlight Picture Info or
Video Info, then press the OK button. Information about the picture or video is displayed. 3 To view information on the next or previous picture or video, press. Press the Menu button to exit the menu.
Sharing Pictures and Videos
The Share button lets you tag your pictures and videos. When they are transferred to your computer, you can share: Tagged Pictures m By print m By email m As Favorites, for easy organization on your computer Tagged Videos m By email m As Favorites
Print (page 48) Email (page 49) Favorite (page 50)
When Can I Tag My Pictures and Videos?
Press the Share button to tag pictures and videos: m Any time (the last picture taken and the Share menu are displayed). m Just after you take them, during Quickview (see page 17 and page 32). m After pressing the Review button (see page 41). NOTE: Tags remain until removed. If a tagged picture or video is copied, the tag is not copied. In a burst series, only the last picture is tagged during Quickview.
Tagging Pictures for Printing
1 Press the Share button. Press
to locate a picture. 2 Press to highlight Print , then press the OK button.* 3 Press to select the number of copies (0-99). Zero removes the tag for that picture. The Print icon appears in the status area. The default quantity is one. (To change the default, see page 52.)
Tagging Pictures and Videos as Favorites
to locate a picture. 2 Press to highlight Favorite , then press the OK button. The Favorite icon appears in the status area. 3 To remove the tag, press the OK button again. 4 Press the Share button to exit the menu.
Using Favorites On Your Computer
When you transfer Favorite pictures and videos to your computer, you can use Kodak EasyShare software to retrieve, organize, and label them by subject, date, event, or any category you choose. For details, click the Help button in the Kodak EasyShare software.
Click the Help button in the Kodak EasyShare software for details on creating address books, and printing, emailing, and organizing tagged pictures on your computer.
Customizing Your Camera Settings
Use Setup to customize camera settings according to your preferences.
To Access Setup Mode/Menus
1 In any Capture mode (or in Review), press the Menu button. 2 Press to highlight Setup Menu , then press the OK button.
Return to previous menu Default Print Quantity (page 52) Quickview (page 52) Liveview (page 53) Advanced Digital Zoom (page 54) Date & Time Set (page 7) Video Out (page 55) Language (page 55) Format (page 56) About (page 56)
Changing the Default Print Quantity
The Default Print Quantity setting determines the value that is displayed on the Share Print screen (page 48). The default value is 1. 1 Press the Menu button. 2 Press to highlight Setup Menu , then press the OK button.
to highlight Default Print Quantity , then press the OK button. 4 Press to select the new default quantity, then press the OK button. 5 Press the Menu button to exit the menu. This setting remains until you change it.
Turning Off Quickview
After you take a picture or video, Quickview displays it on the camera screen for approximately 5 seconds (see page 17 and page 32). To save battery power, turn off Quickview. 1 Press the Menu button. 2 Press to highlight Setup Menu , then press the OK button. 3 Press to highlight Quickview , then press the OK button.
to highlight Off, then press the OK button. 5 Press the Menu button to exit the menu. The picture is not displayed on the camera screen after you take it. To see the picture or video, press the Review button. This setting remains until you change it.
Turning On Liveview in Still Modes
The Liveview feature lets you use the camera screen as a viewfinder (see page 15). The default setting is Liveview Off. IMPORTANT: Liveview quickly depletes battery power; use it sparingly. To change the Liveview default to On: 1 Press the Menu button. 2 Press to highlight Setup Menu , then press the OK button. 3 Press to highlight Liveview , then press the OK button.
to highlight On, then press the OK button. Liveview is now On by default. The camera screen is on whenever the camera is on (in Still or Video mode). You can still press the OK button to turn Liveview off and on. 5 Press the Menu button to exit the menu. This setting remains until you change it.
Changing Advanced Digital Zoom
You can customize the way the Advanced Digital Zoom turns on. 1 Press the Menu button. 2 Press to highlight Setup Menu , then press the OK button. to highlight Advanced Digital Zoom , then press the OK button. 4 Press to highlight an option: Continuousdigital zoom automatically turns on after the Telephoto button is pressed to the optical zoom limit and held. Pause (default)digital zoom turns on after the Telephoto button is pressed to the optical zoom limit, released, then is pressed again. Nonedisables digital zoom. 5 Press the Menu button to exit the menu. NOTE: Advanced Digital Zoom cannot be activated unless Liveview is on.
Setting Video Out
Video Out is a regional setting that lets you connect to a television or other external device (see page 55). 1 Press the Menu button. 2 Press to highlight Setup Menu , then press the OK button. 3 Press to highlight Video Out , then press the OK button.
to highlight an option: NTSC (default)used in most countries except those in Europe and China. North America and Japan use NTSC. PALused in Europe and China. 5 Press the OK button to accept the change. 6 Press the Menu button to exit the menu. This setting remains until you change it.
Selecting a Language
You can display menus and screen messages in different languages. 1 Press the Menu button. 2 Press to highlight Setup Menu , then press the OK button. 3 Press to highlight Language , then press the OK button.
4 Highlight an option, then press the OK
5 Press the Menu button to exit the menu.
Text is displayed in the selected language. This setting remains until you change it.
Formatting Internal Memory or MMC/SD Card
Formatting erases all pictures and videos, including those that are protected. Removing a card during formatting may damage the card. 1 Press the Menu button. 2 Press to highlight Setup Menu , then press the OK button. 3 Press to highlight Format , then press the OK button.
to highlight an option: MEMORY CARDdeletes everything on the card; formats the card. CANCELexits without making a change. INTERNAL MEMORYdeletes everything in internal memory including email addresses and album names; formats the internal memory.
5 Press the OK button. 6 Highlight Continue Format, then press the OK button.
When the formatting is complete, the Setup menu appears.
Viewing Camera Information
1 Press the Menu button. 2 Press to highlight Setup Menu , then press the OK button. 3 Press to highlight About , then press the OK button.
The camera model and the current firmware version appear.
4 Press the Menu button to exit the menu.
Installing the Software
NOTE: To install software on computers running Windows 2000, Windows XP Pro, or Mac OS X, you need administrator privileges. See your computer users guide.
Windows System Requirements
m Personal computer running Windows 98, 98SE, ME, 2000, or XP OS m 233 MHz processor or greater (300 MHz recommended for Windows m 64 MB of available RAM (128 MB recommended) m 100 MB of available hard disk space m CD-ROM drive m Built-in USB port m Color monitor with a minimum resolution of 800 x 600 pixels; High Color m Internet access for online printing and emailing
(16-bit) or True Color (24-bit) recommended 2000 and XP)
Mac OS X System Requirements
m Macintosh computer with a G3 or G4 processor m Mac OS 10.1.2, minimum m 128 MB of available RAM m 200 MB of available hard disk space m CD-ROM drive m Built-in USB port m Color monitor with a minimum resolution of 800 x 600 pixels; thousands m Internet access for online printing and emailing
or millions of colors recommended
Mac OS 8.6 and 9.x System Requirements
m PowerPC-based Macintosh computer m Mac OS 8.6 or 9.x m 64 MB of available RAM m 200 MB of available hard disk space m CD-ROM drive m Built-in USB port m Color monitor with a minimum resolution of 800 x 600 pixels; thousands m Internet access for online printing and emailing
NOTE: Mac OS 8.6 and 9.x do not support the Share button functions. Mac OS X is recommended for full functionality. or millions of colors recommended
Install the Software
For information on the software applications included on the Kodak EasyShare software CD, click the Help button in the Kodak EasyShare software.
Install Kodak EasyShare software before connecting the camera or optional dock to the computer. Failure to do so may cause the software to load incorrectly.
1 Before you begin, close all software
applications that are open on your computer (including anti-virus software). 2 Place the Kodak EasyShare software CD into the CD-ROM drive. 3 Load the software: Windows-based computerif the install window does not appear, choose Run from the Start menu and type d:\setup.exe where d is the drive letter that contains the CD. Mac OS 8.6 or 9.xon the install window, click Continue. Mac OS Xdouble-click the CD icon on the desktop, then click the Install icon.
Chapter Follow the on-screen instructions to install the software. m Windows-based computersselect Typical to automatically install
the most commonly used applications. Select Custom to choose the applications you wish to install. m Mac OS 8.6 or 9.xselect Easy to automatically install the most commonly used applications. m Mac OS Xfollow the on-screen instructions. NOTE: When prompted, take a few minutes to electronically register your camera and software. This lets you receive information regarding software updates and registers some of the products included with the camera. You must be connected to your Internet service provider to register electronically. To register later, see www.kodak.com/go/register. 5 If prompted, restart the computer. If you turned off anti-virus software, turn it back on. See the anti-virus software manual for details.
Connecting Camera to Computer
Install Kodak EasyShare software before connecting the camera or optional dock to the computer. Failure to do so may cause the software to load incorrectly. You can transfer pictures and videos from the camera to the computer using: m The (included) USB cable. m The (optional) Kodak EasyShare camera dock 6000. See page 63 for connecting with the camera dock. m The (optional) Kodak EasyShare printer dock 6000. Purchase these and other accessories at a dealer of Kodak products or www.kodak.com/go/cx6330accessories.
Camera Dock 6000 Package Contents
1 Camera dock 6000 (with universal insert
2 5-volt AC power adapter
Your AC adapter may differ from the one pictured. 3 Kodak EasyShare Ni-MH rechargeable battery pack 4 Quick Start Guide (not shown)
Do not use the 5-volt AC power adapter to power your camera without the dock. It is not compatible with your camera alone.
Installing the Custom Camera Insert
A universal insert is pre-installed in the camera dock. It allows all Kodak EasyShare CX/DX6000 series and LS600 series cameras to use the camera dock. A custom insert is included with your camera. It provides a perfect fit for the Kodak EasyShare CX6330 zoom digital camera.
Remove the Universal Insert
1 Place your thumbs against the front of the
universal insert. Press in and lift.
2 Lift the side edge of the insert, then remove
the insert from the dock.
3 Save the universal insert as a spare.
Install the Custom Insert
1 Position the custom insert so that the cutout
lines up with the camera dock connector. Snap it into place. To order a custom insert, visit www.kodak.com/go/cx6330accessories.
2 Fit the insert into the groove in the dock.
Connecting the Camera Dock 6000
After the Kodak EasyShare software is loaded (see page 57), connect the camera dock to your computer and to a power outlet. You need: m The USB cable included with your camera m The 5-volt AC adapter included with the camera dock IMPORTANT: Make sure your camera is NOT in the camera dock when you are connecting to power and the computer.
1 Plug the labeled
end of the USB cable into the labeled USB port on your computer. See your computer users guide for details. 2 Plug the other end of the USB cable into the square USB connector on the back of the camera dock. 3 Plug the AC adapter into the round power connector on the back of the camera dock and into a power outlet. Your AC adapter may differ from the one pictured or may have additional plugs. Use the plug that accommodates your type of power outlet.
Use only the 5-volt AC adapter included with the camera dock 6000. Other adapters may cause damage to your camera, camera dock, or AC adapter. Leave the camera dock connected so its always ready to transfer pictures and videos.
Installing the Rechargeable Battery
You received (2) Kodak Max digital camera batteries (AA) with your camera. To take full advantage of your camera dock 6000, replace the AA batteries with the Kodak EasyShare Ni-MH rechargeable battery pack that is packaged with the camera dock.
1 Open the battery door on the bottom of the
2 Install the Ni-MH rechargeable battery pack
The battery pack can only be inserted into the camera in the orientation shown. If the Battery Pack does not easily install, reposition it and try again. DO NOT FORCE IT. Doing so can damage your camera. 3 Close the battery door.
IMPORTANT: The battery pack is not charged when you receive it. See page 68 for charging instructions.
Docking the Camera
To charge the battery or to transfer pictures and videos from the camera to the computer:
1 Flip down the camera dock foot.
The camera dock now sits at the proper angle for viewing the camera screen. 2 Turn off the camera. NOTE: If a USB cable is plugged into the camera Foot itself, unplug it.
3 Match the connector and alignment pins on
the camera dock to the camera. Push down until the camera is securely seated. The Transfer light glows green when the camera is seated.
If a rechargeable battery is in the camera, the first battery charging light glows green.
Transfer light Charging lights
The camera is now powered by the camera dock instead of the camera batteries.
NOTE: If the Kodak EasyShare Ni-MH rechargeable battery pack requires charging, charging begins (see page 68).
Charging the Battery
rechargeable battery pack is installed in the camera (see page 66). 2 Turn off the camera and place it in the Charging camera dock (see page 67).
1 Make sure the Kodak EasyShare Ni-MH
If the battery requires charging, charging begins after a brief battery check. m Full charging takes about 2.5 hours. m Charging stops if you turn on the camera. If the camera is left in the camera dock with the power on, charging resumes when the camera enters auto power-off (see page 99). m Charging is suspended during picture transfer.
Charging Lights Status
Charging Lights Cause Green lights Camera is properly docked. Battery is either being checked or is less than half charged. Battery is more than half charged. Battery is fully charged. Red light Battery is not properly installed (see page 66). (blinking) Battery or connector pin is damaged. Camera and battery have been exposed to extreme temperatures. Slowly return to room temperature. No lights Camera is not properly seated in the camera dock. AC adapter is not connected. Correct battery is not installed (see page 66). 68
TroubleshootingCamera Dock 6000
Problem Pictures are not transferred to the computer Cause AC adapter or USB cable is not securely connected. Software is not installed. Too many applications running on computer. Camera was removed from the camera dock during picture transfer. Transfer button was not pressed. Solution Check the connections (page 65). Install the software (page 57). Close all software applications and try again. Replace the camera on the camera dock and press the Transfer button. Press the Transfer button.
Earlier Cameras and Docks
Your Kodak EasyShare camera dock 6000 requires a Kodak EasyShare CX/DX6000 or LS600 series digital camera. Earlier camera models (Kodak EasyShare 4000 series and previous) require the original Kodak EasyShare camera dock or camera dock II.
When you have questions about your camera or camera dock 6000, start here. Additional technical information is available in the ReadMe file located on the Kodak EasyShare software CD. For updates to Troubleshooting information, see www.kodak.com/go/cx6330support.
Problem Cause Camera does not Batteries are not turn on. properly installed. Battery is not charged. Camera does not A non-approved battery turn off; lens does may be in the camera. not retract. Pictures Picture does not take remaining up enough space to number does not decrease the number. decrease after You did not take a taking a picture. picture. Picture orientation is not accurate. Stored pictures are corrupted. Solution Reinstall the batteries (page 4). Recharge the battery (page 68). Use the batteries that came with your camera, or an approved replacement battery (page 97). The camera is operating normally. Continue taking pictures. Use Review (page 37) or Quickview (page 17) to make sure a picture was taken. Set the Orientation Sensor (page 29).
The camera was rotated or tilted while the picture was taken. The card was removed Retake picture. Do not remove or the batteries expired card while the ready light is while the ready light blinking. Keep battery charged. was blinking.
Problem Picture is not clear. Cause The lens is dirty. Subject too close when taking picture. Solution Clean the lens (page 94). Move so there is at least 23.6 in. (60 cm) between the camera and the subject, or at least 5.1 in. (13 cm) at Wide in Close-up mode. Subject or the camera Place the camera on a flat, steady moved while the surface or use a tripod. picture was taken. The subject is too far Move so there is no more than away for the flash to be 11.8 ft (3.6 m) between the effective. camera and the subject; 6.9 ft (2.1 m) in Telephoto. Auto focus was not To take the best possible pictures, achieved. press the Shutter button half-way and hold. When the ready light glows green, press the Shutter button the rest of the way down to take the picture. (If the yellow light blinks, release the Shutter button and recompose picture.) Camera is in Close-up Use Close-up mode when subject mode. is 5.1-27.6 in. (13-70 cm) from the lens in Wide Angle; 8.7-27.6 in. (22-70 cm) in Telephoto. Video Out setting is Adjust the camera Video Out incorrect. setting (NTSC or PAL, page 55). External device is set See the external devices users incorrectly. guide. 77
Slide show does not run on external video device.
Problem The computer cannot communicate with the camera. Cause There is a problem with the configuration of the USB port on the computer. Camera power is off. Battery is not charged. Some Advanced Power Management utilities on laptops turn off ports to save battery life. USB cable is not securely connected. Software is not installed. Solution See this file on the EasyShare software CD: USB.html Or, go to: www.kodak.com/go/ camerasupport Turn on the camera (page 6). Recharge the battery (page 68). See the Power Management section of the laptop users guide to disable this feature.
Connect cable to camera and computer port (page 61). Install the software (page 57). Software is installed Disconnect the USB cable. Close all incorrectly. open applications. Uninstall, then re-install the software (page 57). To uninstall, go to Start/Settings/ Control Panel/Add/Remove Programs. Too many applications Disconnect camera from the are running on the computer. Close all software computer. applications, reconnect camera. The Battery Monitor or Close that software before starting similar software runs the Kodak software. constantly.
Kodak EasyShare CX6330 zoom digital camera Zoom (still capture) 3X optical, 3.3X digital
Original Factory Settings
Feature Date/Time Date/Time Stamp Default Print Quantity Digital Zoom initiation Exposure Compensation Flash Factory Setting 2003/01/01; 12:00 Off 1 Pause 0.0 Auto, Night: Auto flash Sport: Auto flash Landscape, Close-up, Video: Flash Off Auto English Off On Best On 5 seconds Off None NTSC
Image Storage Language Liveview Orientation Sensor Picture Quality Quickview Slide Show Interval Slide Show Loop Video Date Display Video Out
Upgrading Your Software and Firmware
Download the latest versions of the software included on the Kodak EasyShare software CD and the camera firmware (the software that runs on the camera). See www.kodak.com/go/cx6330downloads.
Tips, Safety, Maintenance
m Always follow basic safety precautions. Refer to the Important Safety m Do not allow chemicals, such as suntan lotion, to come into contact with m If the camera has been subjected to inclement weather or you suspect
the painted surface of the camera. water has gotten inside the camera, turn off the camera and remove the batteries and card. Allow all components to air-dry for at least 24 hours before using the camera again. If this does not resolve the problem, contact customer support (page 88). m Blow gently on the lens or camera screen to remove dust and dirt. Wipe gently with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions unless they are designed specifically for camera lenses. Do not wipe the camera lens or camera screen with chemically treated eyeglass lens tissue. It may scratch the lens. m Wipe the outside of the camera with a clean, dry cloth. Never use harsh or abrasive cleaners or organic solvents on the camera or any of its parts. m Service agreements are available in some countries. Contact a dealer of Kodak products for more information. m For rechargeable battery disposal information, visit the Rechargeable Battery Recycling Corporation Web site at www.rbrc.com. m For digital camera disposal or recycling information, contact your local authorities. In the US, visit the Electronics Industry Alliance Web site at www.eiae.org or the Kodak Web site at www.kodak.com/go/cx6330support. Instructions booklet packed with your camera.
Index camera dock, 71 charging battery, 68 connection, 65 connector on camera, iv docking camera, 67 lights status, 69 package contents, 63 specifications, 70 camera screen picture location icon, 8 reviewing pictures, 37 reviewing videos, 37 status area, 8 turning off liveview, 53 turning off quickview, 52 using as viewfinder, 15 Canadian compliance, 100 card, memory, 96 caring for your camera, 94 changing storage location, 11 charging battery via camera dock, 68 charging lights camera dock, 68 checking storage setting, 12 cleaning camera, lens, 94 clock, setting, 7 computer connecting camera, 61
connecting camera dock, 65 system requirements, 57 transfer to, 61, 69 connecting camera dock, 65 camera to camera dock, 67 connector for camera dock, iv contents camera, 3 camera dock, 63 copy pictures card to memory, 45 memory to card, 45 to computer via camera dock, 69 to computer via USB cable, 61 CRV3, 4 customer support, 88 customizing camera settings, 51 D date imprinting on pictures, 28 setting, 7 DCIM folder, card, 96 DC-in, ii, iii, 99 default settings, 93
Index delete button, ii deleting by formatting, 56 during quickview, 17, 32 from internal memory, 39 from MMC/SD Card, 39 protecting pictures, videos, 41 digital zoom changing, 54 using, 18 displaying slide show, 43 disposal, recycling, 94 dock camera, 63 printer, 62 downloading pictures, 61, 69 E EasyShare software, 57 emailing pictures, videos, 49 error code, 83 exposure compensation, 24 external video device setting video out, 55 viewing pictures, videos, 44 F favorites, tagging, 50 FCC compliance, 100 file names, card, 96 firmware upgrading, 94 version, 56 flash settings, 19 unit, i focus framing marks, 16 folders, card, 96 formatting internal memory, 56 MMC/SD card, 56 G guidelines, battery, 97 H help camera dock, 71 software, 88 support, 87 web links, 87 I icons
Index camera status, 8 mode dial, 14 image storage menu, 11 information about camera, 56 about pictures, videos, 46 installing batteries, 4 MMC/SD card, 10 software, 59 internal memory formatting, 56 setting storage location, 11 storage capacity, 95 K Kodak digital camera batteries, 4 Kodak EasyShare software getting help, 88 installing, 59 upgrading, 94 Kodak web sites, 87 L language, setting, 55 LCD (liquid crystal display). See camera screen lens, i cleaning, 94
Index troubleshooting camera dock, 71 turning camera on and off, 6 U upgrading software, firmware, 94 URLs, Kodak web sites, 87 USB (universal serial bus) connection location, iii transferring pictures, 61 V video setting video out, 55 videos checking location, 12 copying, 45 date display, 46 deleting, 39 emailing tagged, 49 file naming, 96 protecting, 41 reviewing, 37 storage capacities, 95 taking, 31 transfer to computer, 61, 69 viewing, 37 viewfinder, i, ii
using camera screen, 15 viewing camera information, 56 picture, video information, 46 viewing picture after taking, 17, 37 magnified, 40 viewing video, after taking, 32 W white balance, 92 wide angle button, ii Windows installing software, 59 system requirements, 57 wrist strap, 5 wrist strap post, i Z zoom button, ii changing digital, 54 digital, 18 optical, 18
RM-TP503 RT-909 Memory Card NW-S615F 42LB1DR DSC-S980 B KX-FP205E Tassimo Scanjet 4600 Matrix 97 Shift CFX20 Lumina 1998 KX-TG6413 CXT85 DCR-TRV520E SD 623 TK-T200 CT-29H32E Control 53-0021 TA-RW404 RA-217 LXT320 AW122N 42WM03L HT-Z110R Scanmaker 6000 XL2270HD BOY 71 0645 RE-29FB51RQ SU-X101 H6315 Deville 1995 DCR-TRV238E N150 Ja05 GA-6wmmc7-1 IC-FR3000 PDM-02 Nokia 6650 300 DN HM-DR10000 2 IX 7600G VC-C4-vc-c4R Battery AX-M7 M3N HW VGC-RA51 Processer PCA 450 PSR-4500 Dvdr3300H-19 DVP-NS765P Laserjet 4000 CS50 4 Tri Beam 2156 C PW50-2005 Colibri 25 KDL-46Z5100 Volvo V50 UX-D57CL TEW-637AP DS210plus HBR49 VGN-NS20e P KA 2888 WTC1381F LA26A450c1N LE-32B350F SRU530 Surgeteuse 700 Digital Elph PSS680 MS-7512 SR-S2028CVW GV-D200 Firmware 28LD5200E Models SC-DX200 Software Sup 012 DMC-LZ10 T-4087 Studioworks 452V Beuvljg RP200 FX-570CD Edition Driver Specs TM-EC5658V Logger Asus W1J ZWR275 GTM 21 RA-02 Mity3 DX-610 Yamaha 200 Grizzly HD4646 M-4000P
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101