Your camera has 16 MB of internal memory. You can purchase an SD or MMC card to conveniently store more pictures and videos. NOTE: We recommend Kodak SD and MMC cards. When using the card for the first time, format it in this camera before taking pictures (see page 27).
SD or MMC card (optional)

Notched corner

CAUTION: A card can only be inserted one way; forcing it may cause damage. Inserting or removing a card when the Ready light is blinking may damage pictures, card, or camera. See page 52 for storage capacities. Purchase SD or MMC cards at a dealer of Kodak products or www.kodak.com/go/c310accessories or www.kodak.com/go/cd40accessories
Taking pictures and videos

Taking a picture

3 Press the Shutter button

to take the picture.

Ready light

Turn on camera.

4 When the Ready light
Frame your subject in the viewfinder or LCD screen.
blinks green, the picture is being saved; you can still take pictures.

Taking a video

Press the Shutter button down and release, or press and hold for more than 2 seconds. The camera does not record audio.
To stop recording, press the Shutter button again.
Reviewing the picture or video just taken
After you take a picture or video, the camera LCD screen displays a Quickview for approximately 5 seconds. While the picture or video and

Delete

are displayed:
If you take no action, the picture/video is saved.

OK to play/pause a video

Tag a picture/video for email or as a favorite, or tag a picture for print.
To view pictures and videos anytime, see page 7.
Using the camera LCD screen as a viewfinder
IMPORTANT: The Liveview feature significantly depletes battery power; use it sparingly. 1 Turn the Mode dial to any Still mode. 2 Press the OK button to turn on the camera screen. 3 Frame your subject in the camera screen. 4 Press the Shutter button to take the picture. 5 To turn off the LCD screen, press the OK button.

OK button

To make the LCD screen turn on whenever the camera is on, see Liveview, page 25
Picture/video capture screens
Self-timer Date stamp Flash Picture quality Pictures/video time remaining Image storage location Album name Mode description

Zoom: Telephoto Wide

Low battery Capture mode Exposure compensation

Using digital zoom

Use digital zoom in any Still mode to get up to 5X closer to your subject. IMPORTANT: You may notice a decrease in printed image quality when using digital zoom. The blue slider on the zoom indicator pauses and turns red when the picture quality reaches the limit for an acceptable 4 x 6 in. (10 x 15 cm) print. 1 Press the OK button to turn on the LCD screen, then press to zoom in. The LCD screen displays the zoomed image and the zoom indicator. 2 Press

appears

CAUTION: Formatting internal memory or an SD or MMC card deletes all (including protected) pictures, videos. (Formatting internal memory also deletes email addresses, album names, and favorites. To restore them, see EasyShare software Help.)
Deleting pictures and videos
Press Review. (To exit, press Review again.)
for previous/next. Press Delete. Follow the screen prompts.
PICTURE or VIDEOdeletes the displayed picture or video. EXITexits the Delete screen. ALLdeletes all pictures and videos from your current storage location. NOTE: To delete protected pictures and videos, remove protection before deleting.
Transferring and printing pictures
CAUTION: Install Kodak EasyShare software before connecting the camera or optional dock to the computer. Failure to do so may cause the software to load incorrectly.

Installing the software

1 Close all software applications that are open on your computer (including anti-virus software). 2 Place the Kodak EasyShare software CD into the CD-ROM drive. 3 Load the software: Windows OSif the install window does not appear, choose Run from the Start menu and type d:\setup.exe where d is the drive letter that contains the CD. Mac OS Xdouble-click the CD icon on the desktop, then click the Install icon. 4 Follow the on-screen instructions to install the software. Windows OSselect Complete to automatically install the most commonly used applications. Select Custom to choose the applications you wish to install. Mac OS Xfollow the on-screen instructions. NOTE: When prompted, register your camera and software. Registering lets you sign up for information that keeps your system up-to-date. To register later, visit www.kodak.com/go/register. 5 If prompted, restart the computer. If you turned off anti-virus software, turn it back on. See the anti-virus software manual for details. For information on the software applications included on the Kodak EasyShare software CD, click the Help button in the Kodak EasyShare software. 12
Transferring pictures with the USB cable
1 Turn off the camera. 2 Plug the labeled end of the USB cable (model U-8) into the labeled USB port on your computer. See your computer users guide for details. 3 Plug the other end of the USB cable into the labeled USB port on the camera. 4 Turn on the camera. Kodak EasyShare software opens on your computer. The software prompts you through the transfer process. NOTE: Visit www.kodak.com/go/howto for an online tutorial on connecting.
Also available for transferring
You can also use these Kodak products to transfer your pictures and videos.
Kodak EasyShare camera dock, Kodak EasyShare printer dock (see page 17) Kodak multi-card reader, Kodak SD multimedia card reader-writer
Purchase these and other accessories at a dealer of Kodak products or www.kodak.com/go/c310accessories or www.kodak.com/go/cd40accessories

I I I I

Upload your pictures. Edit, enhance, and add borders to your pictures. Store pictures, and share them with family and friends. Order high-quality prints, photo greeting cards, frames, and albumsand have them delivered to your door.
Printing from an optional SD or MMC card
Automatically print tagged pictures when you insert your card into a printer with an SD/MMC card slot. See your printer users guide for details. Make prints at an SD/MMC card-capable Kodak picture maker. (Contact a location prior to visiting. See www.kodak.com/go/picturemaker.) Take the card to your local photo retailer for professional printing.
Dock compatibility for your camera

Kodak EasyShare dock

I printer dock I printer dock plus I printer dock 6000 I camera dock 6000

Docking configuration

Custom dock insert Kodak dock adapter kit D-22
I others, including series 3
printer docks and camera docks

Custom dock insert

I printer dock 4000 I camera dock II I LS420, LS443 camera dock

Not compatible

Purchase camera docks, printer docks, and other accessories at a dealer of Kodak products or www.kodak.com/go/c310accessories or www.kodak.com/go/cd40accessories
Doing more with your camera
Putting yourself in the picture or video
The Self Timer creates a 10- or 2-second delay between the time you press the Shutter button and the time the picture or video is taken. 1 Turn the Mode dial to any Still mode for pictures, or to the Menu button. 2 Press to highlight Self Timer 3 Highlight 10 or 2 seconds, then press the OK button. 4 Press the Menu button to turn off the menu screen. The Self Timer icon and delay time appear in the status area. 5 Place the camera on a flat surface or use a tripod. 6 Compose the scene. Press the Shutter button, then move so that you are in the scene. If the Self Timer is set at 10 seconds, the Self Timer light blinks slowly for 8 seconds (then quickly for 2 seconds) before the picture or video is taken. If the Self Timer is set at 2 seconds, the light blinks for 2 seconds before the picture or video is taken. The Self Timer cancels after you take the picture, record the video, or turn off the camera. NOTE: The video stops when you press the Shutter button or when no storage space remains. for videos, then press
, then press the OK button.

Running a slide show

Use the Slide Show to display your pictures and videos on the LCD screen. To run a slide show on a television or on any external device, see page 20.

Starting the slide show

1 Press the Review button, then press the Menu button. 2 Press to highlight Slide Show , then press the OK button.

Flash fires When the lighting conditions require it. Every time you take a picture, regardless of the lighting conditions. Use when the subject is in shadow or is backlit (when the sun is behind the subject).
Flash modes Auto Flash Fill
Red-eye Three times: once to set the exposure, once to reduce red-eye, and once to take the picture. Off Flash never fires.
Changing picture-taking settings
You can change settings to get the best results from your camera: 1 In any mode, press the Menu button. 2 Press to highlight the setting you wish to change, then press the OK button. 3 Choose an option, then press the OK button. 4 Press the Menu button to exit.
Setting Self Timer Put yourself in the picture or video. Exposure Compensation (Still modes) Choose how much light enters the camera. This setting remains until you turn the Mode dial. Icon Options 10, 2 seconds, Off. See page 18. -2.0 to +2.0. If pictures are too dark, increase the value. If pictures are too light, decrease the value.
Setting Picture Size (Still modes) Set picture resolution. This setting remains until you change it. Icon Options 4.0 MP (default)for printing up to 20 x 30 in. (51 x 76 cm); pictures are highest resolution and largest file size. 3.5 MP (3:2 Best)ideal for printing 4 x 6 in. (10 x 15 cm) prints without cropping. Also for printing up to 20 x 30 in. (51 x 76 cm); some cropping may result due to the 3:2 aspect ratio. 3.1 MP (Better)for printing up to 11 x 14 in. (28 x 36 cm); pictures are medium resolution with smaller file size. 2.1 MPfor printing up to 8 x 10 in. (20 x 25 cm); pictures are medium resolution with smaller file size. 1.1 MPfor printing up to 5 x 7 in. (13 x 18 cm); for emailing, Internet, or screen display; pictures are lowest resolution and smallest file size. Color (default)for color pictures. Black & Whitefor black-and-white pictures. Sepiafor pictures with a reddish-brown, antique look. Auto (default)the camera uses the card if one is in the camera. If not, the camera uses internal memory. Internal Memorythe camera always uses internal memory, even if a card is installed.

Setting Video Date Display (Video mode) Display capture date and time before the video starts. This setting remains until you change it. Language Display the camera screen text in different languages. This setting remains until you change it. Format Format camera memory. Icon Options Choose None, or choose a date and time format.

See page 3.

CAUTION: Formatting deletes all pictures and videos, including those that are protected. Removing a card during formatting may damage the card.
About View camera and firmware information.
Memory Carddeletes everything on the card; formats the card. Cancelexits without making a change. Internal Memorydeletes everything in internal memory including email addresses, album names, and Favorites: formats the internal memory.
Viewing picture/video information
1 Press the Review button, then press the Menu button. 2 Press to highlight Picture or Video Info, then press the OK button. 3 To view information on the next or previous picture or video, press 4 Press the Menu button to exit.
Changing optional review settings
In Review mode, press the Menu button to access optional review settings.
Magnify (pictures) (page 10) Album (page 28) Slide Show (page 19) Multi-up (page 10) Copy (page 20) Protect (page 11) Image Storage (page 24) Picture/Video Information (page 28) Setup Menu (page 25)
Pre-tagging for album names
Use the Set Album (Still or Video) feature to pre-select album names before you take pictures or videos. Then, all the pictures or videos you take are tagged with those album names.

Firston your computer

Use Kodak EasyShare software to create album names on your computer. Then copy up to 32 album names to the album name list on your camera the next time you connect the camera to the computer. See Kodak EasyShare software Help for details.

Secondon your camera

1 In any mode, press the Menu button. 2 Press to highlight Set Album , then press the OK button.
3 Press to highlight an album name, then press the OK button. Repeat to mark pictures or videos for albums. Selected albums are noted with a check mark. 4 To remove a selection, highlight an album name and press the OK button. To remove all album selections, select Clear All. 5 Highlight Exit, then press the OK button. Your selections are saved. If you turn on the LCD screen, your album selection is displayed on the screen. A plus (+) after the album name means more than one album is selected. 6 Press the Menu button to exit. This setting remains until you change it.

Tagging pictures for printing
1 Press the Share button. 2 Press 3 Press to locate a picture. to highlight Print , then press the OK button.*
4 Press to select the number of copies (0 - 99). The default is one. Zero removes the tag for that picture.** The Print icon appears in the status area. 5 Press the OK button.
6 Press the Share button to exit. * To tag all pictures in the image storage location, highlight Print All , press the OK button, then select the number of copies as described above. Print All is not available in Quickview. **To remove the print tagging for all pictures in the image storage location, highlight Cancel Prts , then press the OK button. You cannot cancel prints in Quickview. Printing tagged pictures When you transfer the tagged pictures to your computer, the Kodak EasyShare software print screen opens. For details, click the Help button in the Kodak EasyShare software. For more information on printing from your computer or card, see page 32. NOTE: For the best 4 x 6 in. (10 x 15 cm) prints, set the camera to 3.5MP (3:2) print quality setting. See page 24.
Tagging pictures and videos for emailing
Firston your computer Use Kodak EasyShare software to create an email address book on your computer. Then, copy up to 32 email addresses to the cameras internal memory. Secondtag pictures/videos on your camera 1 Press the Share button. Press 2 Highlight Email to locate a picture/video. , then press the OK button.
3 Highlight an email address, then press the OK button. To tag other pictures/videos with the same address, press to scroll through the pictures. When the picture or video you want is displayed, press the OK button. To send the pictures/videos to more than one address, repeat step 2 for each address. Selected addresses are checked. 32
4 To remove a selection, highlight a checked address and press the OK button. To remove all email selections, highlight Clear All. 5 Highlight Exit, then press the OK button. Your selections are saved. The Email icon 6 Press the Share button to exit. Thirdtransfer and email When you transfer the tagged pictures/videos to your computer, the Email screen opens and lets you send them to the addresses you specified. For details, click the Help button in the Kodak EasyShare software. appears in the status area.
Tagging pictures as favorites
You can preserve your favorite pictures in the Favorites section of your cameras internal memory, then share them with friends and family. NOTE: When you transfer pictures from your camera to your computer, all pictures (including favorites) are stored on your computer at full size. Favorite picturessmaller copies of your originalsare loaded back to your camera, so you can share and enjoy more. Share your favorite pictures in 4 easy steps:

1. Take pictures

2. Tag pictures as 1 Press the Share button. Press favorites 2 Press to highlight Favorite
to locate a picture. , then press the OK button.

Troubleshooting

For step-by-step product support, visit www.kodak.com/go/c310support or www.kodak.com/go/cd40support and select Interactive Troubleshooting & Repairs.

Camera problems

Problem Camera does not turn on. Camera does not turn off. Cause Batteries are not installed correctly. Camera has locked up. Solution Install new batteries (page 1) or charge rechargeable batteries. Remove the battery, then reinsert or replace it. If the camera still does not function, contact Customer Support (page 46).
Pictures remaining number does not decrease after taking a picture.
Picture does not take up The camera is operating normally. enough space to Continue taking pictures. decrease the number.
Short battery life Dirt or oxidation on the with Kodak Ni-MH battery contacts. rechargeable digital camera batteries. Stored pictures are corrupted.
Wipe the contacts with a clean, dry cloth (page 55) before loading batteries in the camera.
Card was removed or the Retake picture. Do not remove card batteries expired while while the ready light is blinking. Keep the ready light was rechargeable batteries charged. blinking.

Problem Cause Solution

In Review mode, Camera may not be Check the image storage location you do not see a accessing the correct setting (page 24). picture (or the image storage location. expected picture) on the LCD screen. In Review mode, a File format is blue or black screen unrecognized. is displayed instead of a picture. Shutter button does Camera is not turned on. not work. Camera is processing a picture; the ready light (near the viewfinder) is blinking red. Transfer the picture to the computer (page 13).
Turn on the camera (page 2). Wait until the ready light stops blinking red before attempting to take another picture.
Card or internal memory Transfer pictures to the computer is full. (page 13), delete pictures from the camera (page 11), switch image storage locations (page 24), or insert a card with available memory (page 3). Shutter button was not pressed. Slide show does not Video Out setting is run on external incorrect. video device. External device is set incorrectly. For best pictures, see page 4. Adjust the camera Video Out setting (NTSC or PAL, page 26). See the external devices users guide.
Picture is too light. Subject was too close for Move so there is at least 2.6 ft (0.8 m) flash. between camera and subject. Too much light. Picture is not clear. Lens is dirty. Subject too close when taking picture. Decrease Exposure Compensation (page 23). Clean the lens (page 56). Move so there is at least 2.6 ft (0.8 m) between the camera and the subject.

Message Cause Solution

Memory card is Card is slow, corrupted, or Insert a new card (page 3) or unusable (Insert new unreadable. format the card (page 27). memory card) Caution: Formatting a card deletes all pictures and videos, including protected files. Date and time have been reset This is the first time you Reset the clock (page 3). turned on the camera; or the batteries have been removed for an extended period of time; or the batteries are exhausted.
No address book on No Email addresses Create and copy address book from camera (Connect with appear because there is no computer. See the Kodak computer to import address book. EasyShare software Help. address book) No album names on Album names have not Create and copy album names from camera (Connect with been copied to the camera computer. See the Kodak computer to import from the computer. EasyShare software Help. album names) Can only mark image with 32 album names. Only the first 32 album names will be saved The maximum number of Delete one or more album names album names (32) have associated with the image been associated with an (page 29). image. NOTE: Albums previously associated with an image persist even though they may not be contained in current album file on camera.
Message Cause Solution Leave the camera off until its cool to the touch, then turn it back on. If the message reappears, contact Customer Support (page 46).
High camera Internal temperature of temperature. (Camera the camera is too high for will be turned off.) the camera to operate. The viewfinder light glows red and the camera turns off. Unrecognized file format Camera cannot read the picture format.
Transfer the picture to the computer (page 13), or delete it (page 11). Turn the Mode dial off, then back on. If the message reappears, contact Customer Support (page 46).
Camera error #XXXX. An error is detected. See users guide.
Camera ready light status
Status Ready light does not turn on and the camera does not work. Cause Solution Camera is not turned on. Turn on the camera (page 2). Batteries are exhausted Install new batteries (page 1) or or are not charged. charge rechargeable batteries. Mode dial was on when Turn Mode dial off, then back on. batteries were reloaded. Ready light blinks green. Ready light blinks amber. Picture is being Camera is operating normally. processed and saved to the camera. Flash is not charged. Camera is initializing. Wait. Resume picture taking when the light stops blinking and turns green.
Status Cause Solution Install new batteries (page 1) or charge rechargeable batteries. Transfer pictures to the computer (page 13), delete pictures from the camera (page 11), switch image storage locations (page 24), or insert a card with available memory (page 3). Wait. Resume picture taking when the light turns green. Change the image storage location to internal memory (page 24), or use a different card.

Ready light blinks red Batteries are low or and camera turns off. exhausted. Ready light glows steady red. Cameras internal memory or card is full.
Camera processing memory is full. Card is read-only.
Ready light glows steady green.
Camera is on; ready to Camera is operating normally. take a picture or video.

Getting help

www.kodak.com/go/c310support www.kodak.com/go/cd40support www.kodak.com/go/pcbasics www.kodak.com/go/c310downloads www.kodak.com/go/cd40downloads

Helpful Web links

Help with your camera Help with Windows operating system and working with digital pictures Download the latest camera software and firmware
Optimize your printer for truer, more vibrant www.kodak.com/go/onetouch colors Get support for cameras, software, accessories, more Purchase camera accessories Register your camera View online tutorials www.kodak.com/go/support www.kodak.com/go/c310accessories www.kodak.com/go/cd40accessories www.kodak.com/go/register www.kodak.com/go/howto

Software help

Click the Help button in the Kodak EasyShare software. Also, see the tutorial on the CD for help with connecting your camera to a computer.
Telephone customer support
If you have questions concerning the operation of the software or camera, you may speak with a customer support representative.

Before you call

Have the camera, camera dock, or printer dock connected to your computer. Be at your computer, and have the following information available:
I Operating system I Processor speed (MHz) I Computer model I Amount of memory (MB) I Exact error message you received I Version of Kodak EasyShare software CD I Camera serial number
NOTE: See next page for customer support numbers.
Australia Austria Belgium Brazil Canada China Denmark Ireland Finland France Germany Greece Hong Kong India Italy Japan Korea

631 0024

Netherlands New Zealand Norway Philippines Poland Portugal Singapore Spain Sweden Switzerland Taiwan Thailand Turkey United Kingdom United States International Toll Line International Toll Fax

For more information on batteries, see www.kodak.com/global/en/service/batteries/batteryUsage.jhtml

Battery information

Battery life for Kodak C-series digital cameras
Use the following batteries. Actual battery life may vary based on usage.
CRV3 lithium battery AA (2) lithium batteries KAA2HR Ni-MH rechargeable battery (per charge) Ni-MH AA (2) rechargeable batteries (per charge) oxy-alkaline AA (2) non-rechargeable batteries 500600
Battery Life (Approx. number of pictures in Auto mode)
Battery life test method: CIPA Memory card used in test: Kodak SD 128 MB memory card
We do not recommend or support alkaline batteries. For acceptable battery life, and to make sure your camera operates dependably, use the replacement batteries listed above.

Extending battery life

Limit the following activities that quickly deplete battery power: Reviewing your pictures on the camera screen (see page 7) Using the camera LCD screen as a viewfinder (see page 5) Excessive use of the flash (see page 22)
Dirt on the battery contacts can affect battery life. Wipe the contacts with a clean, 55
dry cloth before loading batteries in the camera.
Battery performance is reduced at temperatures below 41F (5C). When using your camera in cold weather, carry spare batteries and keep them warm. Do not discard cold batteries that do not work; when they return to room temperature, they may be usable.
Visit www.kodak.com/go/c310accessories or www.kodak.com/go/cd40accessories for: Kodak EasyShare camera dockpowers your camera, transfers pictures to your computer, and charges the available Kodak Ni-MH rechargeable digital camera battery KAA2HR. Kodak EasyShare printer dockpowers your camera, makes 4 x 6 in. (10 x 15 cm) prints with or without a computer, transfers pictures, and charges the available Kodak Ni-MH rechargeable digital camera battery KAA2HR.
Upgrading your software and firmware
Download the latest versions of the software included on the Kodak EasyShare software CD and the camera firmware (the software that runs on the camera). Visit www.kodak.com/go/c310downloads or www.kodak.com/go/cd40downloads.

Waste Electrical and Electronic Equipment labeling
In the European Union, do not discard this product as unsorted municipal waste. Contact your local authorities or go to www.kodak.com/go/recycle for recycling program information.

Korean Class B ITE

VCCI Class B ITE
English translation: This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.

Australian C-Tick

A AA battery, installing, 1 About, 27 accessories, 13 battery, 55 buying, 46 camera dock, 56 printer dock, 14, 56 SD/MMC card, 3 albums, tagging pictures for, 28, 29 alkaline batteries, warning, 1 Australian C-Tick regulatory information, 60 auto flash, 7 power-down, 53 B batteries expected life, 55 extending life, 55 loading, 1 types, 1, 51, 55 battery safety, 54 battery compartment, ii button controller, ii Delete, ii delete, 5 Flash/Status, ii flash/status, 7
Menu, ii Review, ii review, 7 Share, ii shutter, i zoom, 6 C cable audio/video, 20 USB, 13 camera dock, 56 camera screen, ii error messages, 41 reviewing pictures, 7 reviewing videos, 7 turning Liveview default on/off, 26 Canadian compliance, 60 caring for your camera, 56 Class B ITE, 60 clock, setting, 2, 3, 26 Color Mode, 24 computer connecting camera, 12, 13 transfer to, 12 controller buttons, ii copy pictures card to memory, 20 memory to card, 20 to computer via USB cable, 13 CRV3 battery loading, 1 61
customer support, 46 customizing camera settings, 25 D date displaying on video, 27 imprinting on pictures, 26 setting, 26 Date and Time, 26 date setting, 2, 3 Date Stamp, 26 Delete button, ii deleting during quickview, 5 formatting precaution, 27 from internal memory, 11 from SD/MMC card, 11 protecting pictures, videos, 10 digital zoom, 6 displaying slide show, 19 disposal, recycling, 57, 60 dock camera, 56 printer, 14, 56 dock connector, ii downloading pictures, 12 E EasyShare software, 12 emailing pictures, videos, 32 error messages, 41 expected life, 55 Exposure Compensation, 23 external video device 62
setting video out, 26 viewing pictures, videos, 20 F favorites removing, 35 settings, 34 tagging, 33 FCC compliance, 59 firmware finding version on camera, 27 firmware, upgrading, 56 flash, i settings, 7 Flash/Status button, ii Format, 27 formatting internal memory/card, 27 G grip, i, ii guidelines, battery, 55 H help camera, 36 EasyShare software, 46 support, 46 web links, 46 I Image Storage, 24 setting storage location, 24 information about camera, 27 installing

for email, 32 for print, 32 tagging pictures for albums, 28, 29 television, slide show, 20 time, setting, 2, 3, 26 timer, shutter delay, 18 tips battery guidelines, 55 care & maintenance, 56 transfer, via USB cable, 13 trash can, deleting, 5 tripod socket, ii troubleshooting camera, 36 camera/computer communications, 40 error messages, 41 ready light status, 44 turning camera on and off, 2 U upgrading software, firmware, 56 URLs, Kodak web sites, 46 USB (universal serial bus) transferring pictures, 13 USB cable camera port, ii V VCCI compliance, 60 Video Date Display, 27 Video Length, 25 Video Out, 26 65
videos checking settings, 8 copying, 20 deleting, 11 display date on, 27 emailing tagged, 32 protecting, 10 record light, i reviewing, 7 setting recording time, 25 storage capacities, 52 transfer to computer, 12 viewing, 7 viewfinder, ii lens, i viewing camera information, 27 viewing picture after taking, 5, 7 W warranty, 57 WEEE Waste Electrical and Electronic Equipment, 60 Windows OS-based computers installing software, 12 wrist strap post, i