After you take a picture or video, the LCD screen displays a Quickview for approximately 5 seconds. While the picture or video and are displayed:
If you press no buttons, the picture/video is saved.

Delete

OK to play/pause a video Tag a picture/video for email or as a favorite, or tag a picture for print.
To view pictures and videos anytime, see page 8.
Picture/video capture screens

Self Timer Date stamp

Picture quality
Pictures/video time remaining Image storage location
Album name Mode description

Zoom: Telephoto Wide

Low battery Capture mode Exposure compensation
Using the LCD screen as a viewfinder
IMPORTANT: The Liveview feature depletes battery power; use it sparingly. 1 Turn the Mode dial to. 2 Press the OK button to turn on the LCD screen. 3 Frame your subject in the LCD screen. 4 Press the Shutter button to take the picture. 5 To turn off the LCD screen, press the OK button.

OK button

To make the LCD screen turn on whenever the camera is on, see Liveview, page 28.

Using digital zoom

Use digital zoom in Auto mode to get up to 5X closer to your subject. IMPORTANT: You may notice a decrease in printed image quality when using digital zoom. The blue slider on the zoom indicator pauses and turns red when the picture quality reaches the limit for an acceptable 4 x 6 in. (10 x 15 cm) print. 1 Press the OK button to turn on the LCD screen, then press. The LCD screen displays the zoomed image and the zoom indicator. 2 Press

Zoom indicator

to zoom in and out.
3 Press the Shutter button to take the picture.
To turn off digital zoom, from the lowest setting, press. NOTE: You cannot use digital zoom for video recording. Digital zoom is available only when Liveview is turned on (see page 28).

Using the flash

Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows. Flash is effective between 3.3 - 7.9 ft (1.0 - 2.4 m). You can only change the flash setting in Auto mode.
Press the button repeatedly to scroll through flash options (see Flash modes table on page 24). The active flash icon is displayed in the LCD screen status area (see page 6).
To change the flash settings, see page 24.
Reviewing pictures and videos
Press the Review button to view and work with your pictures and videos.
Videos: OK to play/pause Rewind to beginning (during playback) Next picture/video (during playback)
Review (Press again to exit)

(previous/next)

To save battery power, use the optional Kodak EasyShare camera or printer dock. (Visit www.kodak.com/go/c530accessories.) NOTE: Pictures taken at 4.4 MP (3:2) quality setting are displayed at a 3:2 aspect ratio with a black bar at the top of the screen.

Transferring and printing pictures
CAUTION: Install Kodak EasyShare software before connecting the camera or optional dock to the computer. Failure to do so may cause the software to load incorrectly.

Installing the software

1 Close all software applications that are open on your computer (including anti-virus software). 2 Place the Kodak EasyShare software CD into the CD-ROM drive. 3 Load the software: Windows OSif the install window does not appear, choose Run from the Start menu and type d:\setup.exe where d is the drive letter that contains the CD. Mac OS Xdouble-click the CD icon on the desktop, then click the Install icon. 4 Follow the on-screen instructions to install the software. Windows OSselect Complete to automatically install the most commonly used applications. Select Custom to choose the applications you wish to install. Mac OS Xfollow the on-screen instructions. NOTE: When prompted, register your camera and software. Registering lets you sign up for information that keeps your system up-to-date. To register later, visit www.kodak.com/go/register. 5 If prompted, restart the computer. If you turned off anti-virus software, turn it back on. See the anti-virus software manual for details. For information on the software applications included on the Kodak EasyShare software CD, click the Help button in the Kodak EasyShare software. 14
Transferring pictures with the USB cable
1 Turn off the camera. 2 Plug the labeled end of the USB cable into the labeled USB port on your computer. See your computer users guide for details. 3 Plug the other end of the USB cable into the labeled USB port on the camera. 4 Turn on the camera. Kodak EasyShare software opens on your computer. The software prompts you through the transfer process. NOTE: Visit www.kodak.com/go/howto for an online tutorial on connecting.
Also available for transferring
You can also use these Kodak products to transfer your pictures and videos.
Kodak EasyShare camera dock, Kodak EasyShare printer dock (see page 19) Kodak multi-card reader, Kodak SD multimedia card reader-writer
Purchase these and other accessories at a dealer of Kodak products or visit www.kodak.com/go/c530accessories.

Printing pictures

Printing with a Kodak EasyShare printer dock
Dock your camera to the Kodak EasyShare printer dock and print directlywith or without a computer. Purchase this and other accessories at a dealer of Kodak products or visit www.kodak.com/go/c530accessories.

Printing from an optional SD/MMC card
Automatically print tagged pictures when you insert your card into a printer with an SD/MMC card slot. See your printer users guide for details. Make prints at an SD/MMC card-capable Kodak picture maker. (Contact a location prior to visiting. See www.kodak.com/go/picturemaker.) Take the card to your local photo retailer for professional printing.
Dock compatibility for your camera

Kodak EasyShare dock

I printer dock plus series 3 I series 3 printer docks and

Docking configuration

camera docks

Custom dock insert

Others, including:
I printer dock I printer dock plus I printer dock 6000 I camera dock 6000
Custom dock insert Kodak dock adapter kit D-22
I printer dock 4000 I camera dock II I LS420, LS443 camera dock

Not compatible

Purchase camera docks, printer docks, and other accessories at a dealer of Kodak products or visit www.kodak.com/go/c530accessories.
Doing more with your camera
Place camera on a tripod or flat surface. In Auto mode, press the Menu button. Choose Self Timer.

Using the self-timer

10-second delay (so you have time to get into the scene) 2-second delay (for a steady, auto-shutter release on a tripod)
Compose the scene. Press the Shutter button.
NOTE: The self timer cancels after you take the picture, record the video, or turn off the camera.
Using the self timer for video
Use the same procedure as above, but:
Turn the Mode dial to video
Press the Shutter button completely down. NOTE: The video stops when you press the Shutter button or when no storage space remains.

Running a slide show

Use the Slide Show to display your pictures and videos on the LCD screen. To run a slide show on a television or on any external device, see page 22.

Starting the slide show

1 Press the Review button, then press the Menu button. 2 Press to highlight Slide Show , then press the OK button.
3 Press to highlight Begin Show, then press the OK button. Each picture and video is displayed once, in the order in which you took them. 4 To cancel the Slide Show, press the OK button.
Changing the slide show display interval
The default interval setting displays each picture for 5 seconds. You can set the display interval from 3 to 60 seconds. 1 On the Slide Show menu, press OK button. 2 Select a display interval. To scroll through the seconds quickly, press and hold 3 Press the OK button. The interval setting remains until you change it. to highlight Interval, then press the

Setting Set Album Choose Album names. Icon Options On or Off. Pre-select album names before you take pictures or videos. Then, all the pictures or videos you take are tagged with those album names. See page 30. Continuous (default)as long as there is room on the card or internal memory, or until the Shutter button is pressed. 5, 15, 30seconds
Video Length (Video mode) Choose the video length. This setting remains until you change it.
NOTE: If the current image storage location does not have adequate space, some video length options are not displayed. See page 50 for storage capacities.
Setup Menu Choose additional settings. See Customizing your camera, page 27.

Customizing your camera

Use Setup to customize your camera settings. 1 In any mode, press the Menu button. 2 Press 3 Press to highlight Setup , then press the OK button.
to highlight the setting you wish to change, then press the OK button.
4 Choose an option, then press the OK button.
5 Press the Menu button to exit.
Setting Return Return to previous menu. Liveview Change LCD screen setting so that it is always on or always off (see page 7). This setting remains until you change it. Auto Power Off Select when you would like the camera to turn off. Date & Time Set the date and time. This setting remains until you change it. Video Out Choose the regional setting that lets you connect the camera to a television or external device (see page 22). This setting remains until you change it. Date Stamp (Auto Mode) Imprint the date on pictures. This setting remains until you change it. Video Date Display (Video mode) Display capture date and time before the video starts. This setting remains until you change it. On or Off. Icon Options
3 minutes (default) 1, 3, 5, or 10 minutes See page 2.
NTSC (default)used in most countries except those in Europe and China. North America and Japan use NTSC. PALused in Europe and China. Turn the Date Stamp on or off, or change the date stamp format.
Choose None, or choose a date and time format.
Setting Language Display the LCD screen text in different languages. This setting remains until you change it. Format Format camera memory. Icon See page 2. Options
CAUTION: Formatting deletes all pictures and videos, including those that are protected. Removing a card during formatting may damage the card.
About View firmware version.
Memory Carddeletes everything on the card; formats the card. Cancelexits without making a change. Internal Memorydeletes everything in internal memory including email addresses, album names, and Favorites: formats the internal memory.
Viewing picture/video information
1 Press the Review button, then press the Menu button. 2 Press to highlight Picture or Video Info, then press the OK button. 3 To view information on the next or previous picture or video, press 4 Press the Menu button to exit.

Tagging pictures and videos for emailing
Firston your computer Use Kodak EasyShare software to create an email address book on your computer. Then, copy up to 32 email addresses to the cameras internal memory. Secondtag pictures/videos on your camera 1 Press the Share button. Press 2 Highlight Email to locate a picture/video. , then press the OK button.
3 Highlight an email address, then press the OK button. To tag other pictures/videos with the same address, press to scroll through the pictures. When the picture or video you want is displayed, press the OK button. To send the pictures/videos to more than one address, repeat step 2 for each address. Selected addresses are checked. 34
4 To remove a selection, highlight a checked address and press the OK button. To remove all email selections, highlight Clear All. 5 Highlight Exit, then press the OK button. Your selections are saved. The Email icon 6 Press the Share button to exit. Thirdtransfer and email When you transfer the tagged pictures/videos to your computer, the Email screen opens and lets you send them to the addresses you specified. For details, click the Help button in the Kodak EasyShare software. appears in the status area.
Tagging pictures as favorites
You can preserve your favorite pictures in the Favorites section of your cameras internal memory, then share them with friends and family. NOTE: When you transfer pictures from your camera to your computer, all pictures (including favorites) are stored on your computer at full size. Favorite picturessmaller copies of your originalsare loaded back to your camera, so you can share and enjoy more. Share your favorite pictures in 4 easy steps:

1. Take pictures

2. Tag pictures as 1 Press the Share button. Press favorites 2 Press to highlight Favorite
to locate a picture. , then press the OK button.
The Favorite icon appears in the status area. To remove the tag, press the OK button again. Press the Share button to exit the menu.
3. Transfer pictures to your computer
1 To enjoy full functionality, install and use the EasyShare software
that was packaged with this camera. (See page 14.)
2 Connect the camera to the computer using the USB cable (see

page 15) or an EasyShare dock. The first time you transfer pictures, the software helps you make choices about your favorite pictures. Then, your pictures are transferred to the computer. Favorite pictures (smaller versions of the originals) are loaded to the Favorites section of your cameras internal memory.
4. View favorites on your camera
1 Turn the Mode dial to Favorites. 2 Press to scroll through favorites.
To exit Favorites mode, turn the Mode dial to any other position.
NOTE: The camera holds a limited number of favorites. Use Camera Favorites in the EasyShare software to customize the size of your camera Favorites section. Videos tagged as favorites remain in the Favorites folder in the EasyShare software. For more details, click the Help button in the Kodak EasyShare software. Optional settings In Favorites mode, press the Menu button to access optional settings.
Slide Show (page 21) Multi-up (page 10) Picture Information (page 29) Remove all favorites (page 37) Setup Menu (page 27)
NOTE: Pictures taken at the 4.4 MP (3:2) quality setting are displayed at a 3:2 aspect ratio with a black bar at the top of the screen. (See Picture Size, page 26.) 36
Removing all favorites from your camera
1 Turn the Mode dial to Favorites 2 Press the Menu button. 3 Highlight , then press the OK button. All pictures stored in the Favorites section of internal memory are removed. Favorites are restored the next time you transfer pictures to the computer. 4 Press the Menu button to exit the menu.
Preventing favorites from transferring to the camera
1 Open the Kodak EasyShare software. Click the My Collection tab. 2 Go to the Albums view. 3 Click the Camera Favorites Album for your camera. 4 Click Remove Album. The next time you transfer pictures from your camera to the computer, use the Camera Favorites Wizard/Assistant in the Kodak EasyShare software to either recreate your Camera Favorites Album or to turn off the Camera Favorites feature. Printing and emailing favorites 1 Turn the Mode dial to Favorites 2 Press the Share button. 3 Highlight Print or Email , then press the OK button. NOTE: Favorites that were taken on this camera (not imported from another source) are good for prints up to 4 x 6 in. (10 x 15 cm). Press to locate a picture.

If. Camera does not recognize SD/MMC card. Try one or more the following
I Purchase a certified SD/MMC card. I Reformat the card (page 29). Caution: Formatting a card deletes all pictures and videos, including protected files. I Insert a card into the slot, then push to seat (page 4).
Camera freezes up I Turn the camera off, then back on. Make sure the camera is turned off before inserting or removing a card. when a card is inserted or removed. Memory card full. I Insert a new card (page 4), transfer pictures to the computer (page 15), or delete pictures (page 13). internal memory (page 29). Caution: Formatting a card deletes all pictures and videos, including protected files.
I Transfer pictures to the computer (page 15), then format the card or
Camera/computer communications
If. Try one or more of the following The computer does I Visit www.kodak.com/go/camerasupport. not communicate I Turn on the camera (page 2). with the camera. I Install new batteries (page 1) or charge rechargeable batteries. I See the Power Management section of the laptop users guide to disable this feature. I Connect cable to camera and computer port (page 15). I Install the software (page 14). I Disconnect the USB cable. Close all open applications. Re-install the software (page 14). I Disconnect camera from the computer. Close all software applications, reconnect camera. I Close that software before starting the Kodak software. Cannot transfer pictures. (The Add New Hardware Wizard cannot locate drivers.)
I Disconnect USB cable. (If using camera dock or printer dock,
disconnect cable and remove camera from dock). Close all open applications. Re-install the software (page 14).
I Disconnect the USB cable. Close all open applications. Re-install the

software (page 14).

LCD screen messages
If. No images to display Try one or more of the following
I Change image storage location setting (page 26).
If. Memory card requires formatting Memory card cannot be read (Please format memory card or insert another card)
I Unplug the USB cable from the camera. Only one USB connection allowed. Disconnect cable or rem. (remove) camera from dock.

Try one or more of the following
I Insert a new card (page 4) or format the card (page 29).
Caution: Formatting a card deletes all pictures and videos, including protected files.
Internal memory requires formatting Internal memory cannot be read (Please format internal memory) No memory card (Files not copied)
I Format the internal memory (page 29). Caution: Formatting deletes all pictures and videos, including protected files. (Formatting internal memory also deletes email addresses, album names, and Favorites. To restore them, see the Kodak EasyShare software Help.)
I Insert a card (page 4).
Not enough space I Delete pictures from the image storage location you are copying to (page 13), or insert a new card (page 4). to copy files (Files not copied)
If. Try one or more of the following
Memory card is I Insert a new card (page 4), move the switch on the card to unlock the card, or change the image storage location to internal memory locked (Insert new (page 26). memory card) Read-only memory card. Remove write protection to capture or write to card.
I Insert a new card (page 4) or format the card (page 29). Memory card is unusable (Insert Caution: Formatting a card deletes all pictures and videos, new memory card) including protected files.
Date and time have been reset No address book on camera (Connect with computer to import address book) No album names on camera (Connect with computer to import album names)
I Reset the clock (page 2). I Create and copy address book from computer. See the Kodak

EasyShare software Help.

I Create and copy album names from computer. See the Kodak
Can only mark I Delete one or more album names associated with the image (page 32). image with 32 album names. Only the first 32 album names will be saved High camera temperature. (Camera will be turned off.) Unrecognized file format
I Leave the camera off until its cool to the touch, then turn it back on. If the message reappears, visit www.kodak.com/go/c530support and select Interactive Troubleshooting & Repairs. I Transfer the picture to the computer (page 15), or delete it (page 13).
Camera error Turn camera off, then back on. If the message reappears, visit #XXXX. See users www.kodak.com/go/c530support and select Interactive Troubleshooting & Repairs. guide.
Camera ready light status
If. Try one or more of the following Ready light does I Turn on the camera (page 2). not turn on and the I Install new batteries (page 1) or charge rechargeable batteries. camera does not I Turn camera off, then back on. work. Ready light blinks I Camera is operating normally. green. Ready light blinks I Wait. Resume picture taking when the light stops blinking and turns green. amber. Ready light blinks I Install new batteries (page 1) or charge rechargeable batteries. red and camera turns off.

Ready light glows I Transfer pictures to the computer (page 15), delete pictures from the camera (page 13), switch image storage locations (page 26), or insert steady red. a card with available memory (page 4). I Wait. Resume picture taking when the light turns green. I Change the image storage location to internal memory (page 26), or use a different card. Ready light glows I Camera is operating normally. steady green.

Getting help

www.kodak.com/go/c530support www.kodak.com/go/pcbasics www.kodak.com/go/c530downloads www.kodak.com/go/onetouch

Helpful Web links

Help with your camera Help with Windows operating system and working with digital pictures Download the latest camera software and firmware Optimize your printer for truer, more vibrant colors
Get support for cameras, software, accessories, www.kodak.com/go/support more Purchase camera accessories Register your camera View online tutorials www.kodak.com/go/c530support www.kodak.com/go/register www.kodak.com/go/howto

Software help

Click the Help button in the Kodak EasyShare software. Also, see the tutorial on the CD for help with connecting your camera to a computer.
Telephone customer support
If you have questions concerning the operation of the software or camera, have your device connected to your computer, and have this information available:
I Operating system I Processor speed (MHz) I Computer model I Amount of memory (MB) I Exact error message you received I Version of Kodak EasyShare software CD I Camera serial number
Australia Austria Belgium Brazil Canada China Denmark Ireland Finland France Germany Greece Hong Kong India Italy Japan Korea

5007 0035

Netherlands New Zealand Norway Philippines

Poland

Portugal Singapore Spain Sweden Switzerland Taiwan Thailand

00800 4411625

00800 44140775

631 0024

Turkey
United Kingdom United States International Toll Line International Toll Fax

00800 448827073

(toll) ++458 6962
For the most up-to-date listings, visit: www.kodak.com/go/dfiswwcontacts

Appendix

Camera specifications
For more specifications, visit www.kodak.com/go/c530support.

Operating temperature 32-104F (0-40C)

Storage capacities

Actual storage capacity varies depending on subject composition, card brand, and other factors. You may be able to store more or fewer pictures and videos. Favorites take up additional space in internal memory.

Picture storage capacity

Number of pictures 5.0 MP 16 MB internal memory 16 MB SD/MMC 32 MB SD/MMC 64 MB SD/MMC 128 MB SD/MMC 256 MB SD/MMC 512 MB SD/MMC 1 GB SD/MMC 4.4 MP (3:2) 4.0 MP 3.1 MP 2.1 MP 1.1 MP 1800 3631

Video storage capacity

Minutes/seconds of video QVGA (320 x 240) 16 MB internal memory 16 MB SD/MMC 32 MB SD/MMC 64 MB SD/MMC 128 MB SD/MMC 256 MB SD/MMC 512 MB SD/MMC 1 GB SD/MMC 43 secs. 46 secs. 1 min. 37 secs. 3 mins. 16 secs. 6 mins. 44 secs. 13 mins. 17 secs. 26 mins. 38 secs. 53 mins 45 secs.
NOTE: If you are using a 1 GB or larger memory card, video recording may stop automatically after 58 mins. Press the Shutter button to start a new video file.

Power-saving features

If no action for 1 minute The camera Screen turns off. To turn it back on Press any button. Turn the Mode dial off and on again.
3 minutes or select Enters auto power off. 1, 5, or 10 minutes
Important safety instructions

Using this product

Read and follow these instructions before using Kodak products. Always follow basic safety procedures. Use only a USB-certified computer. Contact your computer manufacturer if you have questions. The use of an accessory attachment that is not recommended by Kodak, such as an AC adapter, may cause fire, electric shock, or injury. If using this product in an airplane, observe all instructions of the airline. CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Do not expose this product to liquid, moisture, or extreme temperatures. Kodak AC adapters and battery chargers are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks, do not touch the glass or liquid. Contact Kodak Support.

Battery safety and handling
CAUTION: When removing batteries, allow them to cool first; batteries may be hot.

I I I I I I

Read and follow all warnings and instructions supplied by the battery manufacturer. Use only batteries that are approved for this product. Keep batteries out of the reach of children. Do not allow batteries to touch metal objects, including coins. Otherwise, a battery may short circuit, discharge energy, become hot, or leak. Do not disassemble, install backward, or expose batteries to liquid, moisture, fire, or extreme temperature. Replace all batteries of a set at the same time. Do not mix new batteries with used ones. Do not mix rechargeable and non-rechargeable batteries. Do not mix lithium, Ni-MH, and Ni-Cd batteries together. Do not mix batteries of different chemistry types, grades, or brands. Failure to observe this precaution may cause leakage. Remove batteries when the product is stored for an extended period of time. In the unlikely event that battery fluid leaks inside the product, contact your local Kodak Customer Service representative. In the unlikely event that battery fluid leaks onto your skin, wash immediately with water and contact your local health provider. For additional health-related information, contact your local Kodak Customer Service representative. Dispose of batteries according to local and national regulations. Do not charge non-rechargeable batteries.
For more information on batteries, see www.kodak.com/global/en/service/batteries/batteryUsage.jhtml

Battery information

Battery life for Kodak C-series digital cameras
Use the following batteries. Actual battery life may vary based on usage.
CRV3 lithium battery (2) lithium batteries AA Ni-MH rechargeable digital camera battery KAA2HR (per charge) (2) Ni-MH rechargeable batteries AA (per charge) (2) oxy-alkaline non-rechargeable batteries AA 500600
Battery Life (Approx. number of pictures in Auto mode)
Battery life test method: CIPA Memory card used in test: Kodak SD 128 MB memory card
We do not recommend or support alkaline batteries. For acceptable battery life, and to make sure your camera operates dependably, use the replacement batteries listed above.

Extending battery life

Limit the following activities that quickly deplete battery power: Reviewing your pictures on the LCD screen (see page 8) Using the camera LCD screen as a viewfinder (see page 7) Excessive use of the flash (see page 24)
Dirt on the battery contacts can affect battery life. Wipe the contacts with a clean, dry cloth before loading batteries in the camera.
Battery performance is reduced at temperatures below 41F (5C). When using your camera in cold weather, carry spare batteries and keep them warm. Do not discard cold batteries that do not work; when they return to room temperature, they may be usable.

Visit www.kodak.com/go/c530accessories for: Kodak EasyShare camera dockpowers your camera, transfers pictures to your computer, and charges the available Kodak Ni-MH rechargeable digital camera battery KAA2HR. Kodak EasyShare printer dockpowers your camera, makes 4 x 6 in. (10 x 15 cm) prints with or without a computer, transfers pictures, and charges the available Kodak Ni-MH rechargeable digital camera battery KAA2HR.
Upgrading your software and firmware
Download the latest versions of the software included on the Kodak EasyShare software CD and the camera firmware (the software that runs on the camera). Visit www.kodak.com/go/c530downloads.
Additional care and maintenance
If the camera has been subjected to inclement weather or you suspect water has gotten inside the camera, turn off the camera and remove the batteries and card. Allow all components to air-dry for at least 24 hours before using the camera again. Blow gently on the lens or LCD screen to remove dust and dirt. Wipe gently with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions unless designed specifically for camera lenses. Do not allow chemicals, such as suntan lotion, to contact painted surfaces. Service agreements are available in some countries. Contact a dealer of Kodak products for more information. For digital camera disposal or recycling information, contact your local authorities. In the US, visit the Electronics Industry Alliance Web site at www.eiae.org or the Kodak Web site at www.kodak.com/go/c530support. 55

Warranty

Limited warranty
Kodak warrants Kodak EasyShare digital cameras and accessories (excluding batteries) to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair.
Limited warranty coverage
This limited warranty will be honored only in the geographical location that Kodak digital cameras and accessories were purchased. Kodak will REPAIR or REPLACE Kodak EasyShare digital cameras and accessories if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Such repair service will include all labor as well as any necessary adjustments and/or replacement parts. Such repair or replacement is the sole remedy under this warranty. If replacement parts are used in making repairs, these parts may be remanufactured, or may contain remanufactured materials. If it is necessary to replace the entire product, it may be replaced with a remanufactured product.

Limitations

Request for Warranty service will not be accepted without proof of date of purchase, such as a copy of the original dated Kodak EasyShare digital camera or accessory sales receipt. (Always keep the original for your records.) This warranty does not apply to the battery(s) used in digital cameras or accessories. This warranty does not cover circumstances beyond Kodaks control, nor problems caused by failure to follow the operating instructions in the Kodak EasyShare digital cameras and accessories Users Guides.
This warranty does not apply when failure is due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with incompatible accessories or attachments, failure to follow Kodaks operation, maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters and cables), or claims made after the duration of this warranty. Kodak makes no other express or implied warranty for this product. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the purchase date. The option of replacement is Kodaks only obligation. Kodak will not be responsible for any special, consequential or incidental damages resulting from the sale, purchase, or use of this product, regardless of the cause. Liability for any special, consequential or incidental damages (including but not limited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services, or claims of your customers for such damages resulting from the purchase, use or failure of the product), regardless of cause or for breach of any written or implied warranty is expressly disclaimed and excluded here from.

Your rights

Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction.
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.

Regulatory compliance