Kodak EasyShare printer dock series 3

Users Guide

www.kodak.com For interactive tutorials, www.kodak.com/go/howto
Eastman Kodak Company Rochester, New York 14650 Eastman Kodak Company, 2004 All screen images are simulated. Kodak, EasyShare, ImageLink, and XtraLife are trademarks of Eastman Kodak Company. P/N 4J1893

Product features

Front/top/side view
Paper tray door Picture Size button
Battery charging lights/ Refresh button Color cartridge light Transfer button/light Left/Right control Paper tray Print button/light
9 Picture Size lights , , , 10 USB device connector (for optional Kodak card reader or PictBridge compatible device) 11 Paper light 12 Camera connector

www.kodak.com/go/support

Back/top/side view
3 Power connector (DC-in)
Slot for paper path Color cartridge (installed as shown) Cartridge door
USB connector (to computer) Cooling vents

Table of contents

1 Getting started...1
Finding a location for your printer dock... 1 Installing the custom camera insert... 2 Connecting the power... 3 Handling and storing the color cartridge... 3 Installing and removing the color cartridge.. 4 Handling and storing the paper... 5 Loading the paper.... 6 Installing and removing the paper tray... 7
2 Setting up your digital camera..8
Choosing the right camera battery for your EasyShare camera. 8 Docking and charging your digital camera... 10 Setting the picture quality... 12 Tagging pictures for printing.. 12
3 Printing without a computer...13
Printing from your digital camera... 13 Printing from a Kodak card reader... 14 Printing tagged pictures... 15 Printing from a PictBridge compatible device.. 15 Changing the printed picture size... 16 Canceling printing.... 19 Removing the perforated tabs from the paper... 19
4 Installing software...20
Minimum system requirements... 20 Installing the software... 20
5 Using the printer dock with a computer...23
Connecting to a computer... 23 Transferring pictures from your digital camera... 24 Transferring pictures from a Kodak card reader.. 25 Printing from a computer.... 26 Canceling printing.... 29
6 Care and maintenance..30
General care.... 30 Cleaning the paper feed roller... 31 Traveling with your printer dock... 32

7 Troubleshooting....33

Printing problems... 33 Transfer/communication problems... 40 Printer dock status lights.... 41

8 Getting help...47

Helpful links... 47 Telephone customer support... 48

9 Appendix...49

Printer dock specifications... 49 Important safety instructions... 50 Upgrading your software and firmware... 51 Additional care and maintenance... 51 Warranty.... 52 Regulatory information... 54

Getting started

Finding a location for your printer dock
Place the printer dock on a flat, clean, dust-free surface, in a dry location, and out of direct sunlight.

5 in. (12.7 cm)

Allow at least 5 in. (12.7 cm) clearance from the back of the printer dock for paper travel. For proper ventilation, make sure the top and back of the printer dock are not blocked. When connecting power or USB cables, keep the cables clear of the paper path to the front and rear of the printer dock.
Avoid areas where ventilation ducts, open doors, or frequent passersby might expose the printer dock and paper to high levels of dust and debris. Airborne dirt particles can affect picture quality. Allow enough space on all sides of the printer dock to let you connect and disconnect cables, change the color cartridge, and add paper.
Installing the custom camera insert
IMPORTANT: Use the custom insert that came with your digital camera to dock the camera, otherwise the camera may not fit on the printer dock. Locate and install the custom insert included with your camera. IMPORTANT: Depending on your camera connector, you may also need to use the Kodak dock adapter D-26. See the instructions included with the dock adapter. a Remove any packing material covering the connector.
b Place the rear tabs of the insert in the slots toward the back of the printer dock. c Press the front of the insert down and snap into place. Purchase a custom camera insert for your Kodak EasyShare digital camera and other accessories at www.kodak.com/go/accessories.

4 Load the paper into the paper tray, with the Kodak logo side facing down. 5 Close the paper tray cover. Purchase Kodak color cartridge & paper kits and other accessories at a retailer of Kodak products, or visit www.kodak.com/go/accessories.
Installing and removing the paper tray
1 Open the paper tray door on the printer dock. 2 Slide the paper tray cover back until it "clicks" into place, about 1.25 in. (3 cm).
3 Slide the paper tray in the printer tray slot until the tray locks into place. IMPORTANT: To ensure the paper tray fits squarely on the printer dock, make sure to keep the paper tray cover all the way open while installing.
Pull the paper tray out to remove it. Close the paper tray cover and paper tray door to keep out dust and debris.
When the paper tray is empty, the Paper light glows steady amber. After refilling and installing the paper tray, press the Print button to clear the paper error and resume printing.
Setting up your digital camera
Choosing the right camera battery for your EasyShare camera
CAUTION: Damage caused by unauthorized accessories is not covered under warranty.
If your EasyShare digital camera came with non-rechargeable batteries:

Lithium 3 V, CRV3

If your EasyShare digital camera came with a rechargeable Li-Ion battery:

2 AA, 1.5 V

install it in your camera. use the Ni-MH rechargeable battery pack that came with the printer dock* Do not use the Ni-MH rechargeable battery pack that came with the printer dock*
* Contents subject to change. NOTE: The Kodak EasyShare Ni-MH rechargeable battery pack and Kodak Li-Ion rechargeable battery are not charged when you receive them. Completely charge them before using them with your EasyShare camera (see page 10). For battery information for other brands of ImageLink print system compatible cameras, see the camera users guide.

Extending battery life

Limit the following activities that quickly deplete battery power: Reviewing your pictures on the camera screen Using the camera screen as a viewfinder Excessive use of the flash
Dirt on the battery contacts can affect battery life. Wipe the contacts with a clean, dry cloth before loading batteries in the camera. Battery performance is reduced at temperatures below 41 F (5 C). When using your camera in cold weather, carry spare batteries and keep them warm. Do not discard cold batteries that do not work; when they return to room temperature, they may be usable. If you are getting fewer than 20 pictures per charge with your Kodak EasyShare Ni-MH rechargeable battery pack, (and if none of the tips above seem to help), consider refreshing the battery pack (see page 11).
For more information on batteries, see your camera users guide, or visit www.kodak.com/global/en/service/batteries/batteryUsage.jhtml.

Docking and charging your digital camera
Docking your digital camera lets you make prints directly from the camera, transfer pictures from the camera to the computer, and charge the camera battery. The Kodak EasyShare printer dock series 3 is ImageLink print system compatible. So in addition to docking Kodak EasyShare digital cameras, you can dock other brands of ImageLink system compatible digital cameras. 1 Make sure a custom camera insert is installed on the printer dock (see page 2), and a dock-rechargeable battery is installed in the camera (see page 8). 2 Place the camera on the printer dock. Push down to seat the connector. Keep the camera wrist or neck strap clear of the paper path to the front and rear of the printer dock. The camera is now powered by the printer dock instead of the camera battery. The Kodak EasyShare Ni-MH rechargeable battery pack and the Kodak EasyShare Li-Ion rechargeable battery charge up to 3 hours. The Battery charging lights turn on as charging progresses. Charging is complete when all three lights are lit. You may leave the camera on the printer dock to maintain the charge. For battery information for other brands of ImageLink system compatible cameras, see the camera users guide.
Refreshing the Kodak EasyShare Ni-MH rechargeable battery pack
NOTE: The battery refresh feature is intended for use with the Kodak EasyShare Ni-MH rechargeable battery pack only. Li-Ion batteries do not require refreshing. For battery information for other brands of ImageLink system compatible cameras, see the camera users guide. If you are getting fewer than 20 pictures per charge with your Kodak EasyShare Ni-MH rechargeable battery pack, follow the tips under Extending battery life, page 9. If these dont help, the battery pack needs to be refreshed. The refresh cycle completely discharges the battery pack, then fully recharges it. NOTE: A full refresh cycle takes up to 8 hours, depending on how much charge is left in the battery pack. For best results, refresh the battery pack overnight; do not interrupt the discharge/recharge cycle. 1 Make sure the Ni-MH rechargeable battery pack is in the camera. 2 Place your EasyShare camera on the printer dock (see page 10). 3 Press and hold the Battery charging lights/Refresh , until the Battery charging button, lights begin flashing green (approximately 5 seconds).
The charging lights monitor the refresh status:
Descending blinking Discharging battery pack (lights turn off as green lights discharging progresses). Ascending steady green lights Charging battery pack (lights turn on as charging progresses). Charging is complete when all three lights are lit.
Setting the picture quality
Before taking pictures, change the picture quality setting (or resolution) on your digital camera to 3:2. This ensures that the pictures you take are proportional to the printer dock paper, preventing unwanted cropping of your pictures. See your camera users guide for more information.

Tagging pictures for printing
NOTE: The following procedure pertains to Kodak EasyShare digital cameras. For information on tagging pictures on other brands of ImageLink system compatible cameras, see the camera users guide. 1 Press the Share button. 2 Press to locate a picture. 3 Make sure Print is highlighted (to tag all pictures in the current image storage location, highlight Print All ), then press the OK button. 4 Press to select the number of copies (0 - 99). The default is one. Zero removes the tag for a selected picture. The Print icon is displayed in the status area.
To apply a print quantity to other pictures, press the print quantity as is, or press to change it.

to locate them. Keep

5 Press the OK button. 6 Press the Share button to exit. NOTE: To remove print tagging from all pictures: from the Share menu, highlight Cancel Prints press the OK button. To print tagged pictures from your digital camera, see page 15. To print tagged pictures from your computer, see page 26. 12

, then

Printing without a computer
IMPORTANT: Wait until printing is complete before removing paper, the paper tray, or the camera. Failure to do so can cause paper misfeeds or jams.
Printing from your digital camera
1 Take a picture with your camera (see your camera users guide). 2 Place the camera on the printer dock (see page 10). The current or most recent picture appears on the camera screen.
To print the current picture, press the Print button,
NOTE: If you tagged pictures for printing using your digital camera, instead of printing the current picture, all tagged pictures are printed (see page 15).
Press the Left/Right control on the printer dock, pictures to print.

to review and choose

3 Press the Print button, The copy screen appears.
To print more than one copy, press press.
to select the number of copies, then
(If you dont press any buttons, after 10 seconds printing starts automatically.) The Print light blinks, and printing starts.The paper cycles four times during the printing process before the finished print is ejected. The first three passes apply layers of yellow, magenta, and cyan colors to the print, and the fourth pass applies the Kodak XtraLife coating that protects and preserves the image.
Printing from a Kodak card reader

Printing duplicate pictures on the same sheet
Method 1: by setting it up on your digital camera 1 Tag the pictures you want to print on your digital camera (see page 12). For each picture, choose the number of copies you would like to print. 2 Place the camera on the printer dock, or insert the memory card into a connected Kodak 8-in-1 or 6-in-1 card reader (sold separately). If your camera is docked, a message appears on the camera screen indicating that tagged pictures have been found. 3 Press the Picture Size button repeatedly to select either 2 up , 4 up , or 9 up , depending on the picture size you wish to print (see page 16). 4 Press Method 2: using the printer dock Place the camera on the printer dock, or insert the memory card into a connected Kodak 8-in-1 or 6-in-1 card reader (sold separately). The current or most recent picture appears on the camera screen.

to begin printing.

Press the Left/Right control on the printer dock, picture to print.

to review and choose a

5 Press the Print button, The copy screen appears.
to select the number of copies, then press
(If you dont press any buttons, after 10 seconds printing starts automatically.)

Canceling printing

Press and hold for 2 seconds. The print job is canceled and ejected from the printer dock. If you cancel a print during the fourth pass (clear coat), the print is ejected upon completion. NOTE: Using the Print button to cancel a print job only works when printing from a docked camera.
Removing the perforated tabs from the paper
IMPORTANT: Remove perforated tabs only after printing. Paper missing perforated tabs will not feed properly. 1 Fold the tabs up, then down. 2 Remove each tab and discard.

Installing software

Macintosh computers
Power Mac G3, G4, G5, G4 Cube, iMac;
Minimum system requirements
Windows OS-based computers
Windows 98, 98SE, ME, 2000 SP1, or
XP OS Internet Explorer 5.01 or higher 233 MHz processor or greater 64 MB RAM (128 MB RAM for Windows XP OS) 200 MB hard disk space available CD-ROM drive Available USB port Color monitor, 800 x 600 pixels (16-bit or 24-bit recommended)
PowerBook G3, G4; or iBook computers

Printing from a computer

We recommend using Kodak EasyShare software (included) for printing. This software lets you take advantage of a wide range of features, including full color enhancement, red-eye reduction, picture organization, and much more. If there are no pictures on your computer, use the printer dock to transfer pictures from your camera or memory card before printing (see page 24). IMPORTANT: Wait until printing is complete before removing paper or the paper tray. Failure to do so can cause paper misfeeds or jams.
Printing with Kodak EasyShare software
1 Make sure Kodak EasyShare software is installed (see page 20) and the printer dock is connected to your computer (see page 23). 2 Click the My Collection tab. 3 Select the pictures you wish to print. 4 Click the Print at Home tab. 5 Make sure the printer dock is selected as the current printer. 6 Change any other settings, such as paper size and print layout, then click Print. NOTE: The Picture Size button on the printer dock is disabled when printing from a computer. Set printing options using EasyShare software. See the EasyShare software Help for details.
Printing tagged pictures from your computer 1 Make sure Kodak EasyShare software is installed (see page 20) and the printer dock is connected to your computer (see page 23). 2 Transfer the tagged pictures to your computer (see page 24). 3 Follow steps 4 through 6 above.
Printing using other applications
1 Make sure the printer driver is installed (see page 20), and the printer dock is connected to your computer (see page 23). 2 Open the pictures you wish to print in the application from which you want to print. 3 Access printer settings by selecting Print or Page Setup from the File menu (depending on your application and operating system). 4 Make sure the printer dock is selected as the current printer. 5 Change any other settings as needed, then click OK or Print. (Depending on your application and operating system, you may first need to return to the main menu and select Print from the File menu.) NOTE: The Picture Size button on the printer dock is disabled when printing from a computer. Set printing options in the application from which you are printing.

Printing problems

If. Try the following Paper does not IMPORTANT: Use only Kodak color cartridge & paper kits for your printer dock. Do not use inkjet paper. feed (Paper light may The paper tray may be empty. Load paper (page 6), re-install the paper glow steady tray, then press. amber) Check the paper:
1 Remove the paper tray (page 7). 2 Inspect the paper supply: make sure paper is not damaged in any
way, or removable tabs have not been detached. Replace with new paper if necessary.
3 Carefully "fan" the paper to keep the sheets from sticking together. 4 Reload the paper tray. Do not exceed the fill line. 5 Re-install the paper tray, then press
Clean the paper feed roller (page 31).

to resume printing.

Multiple sheets 1 Remove the paper tray (page 7). of paper are 2 Remove the paper supply from the paper tray. Carefully "fan" the paper pulled through to keep the sheets from sticking together. printer 3 Reload the paper tray. Do not exceed the fill line.
4 Re-install the paper tray, then press

If. Try the following

IMPORTANT: Use only Kodak color cartridge & paper kits for your Printer is printer dock. Do not use inkjet paper. jammed (Paper and/or If the Paper light is blinking quickly: cartridge lights 1 Remove the paper tray (page 7). may blink quickly) 2 Disconnect the power from the printer dock for 5 seconds, then reconnect the power.
Carefully remove the paper if it does not automatically eject.
IMPORTANT: Always check the paper slot on the back of the printer dock for jammed paper:
3 Remove the paper supply from the paper tray. Carefully "fan" the
paper to keep the sheets from sticking together.
4 Reload the paper tray. Do not exceed the fill line. 5 Re-install the paper tray, then press
If the Color cartridge light is blinking quickly, check the color cartridge:
IMPORTANT: The color cartridge may lock in place if there is a paper error. Do not attempt to remove the cartridge without first clearing the paper error. Make sure the Paper light is off before attempting to remove the cartridge (see Paper light under Printer dock status lights, page 41).

Nothing Check the USB connections from the printer dock to the computer (page 23). happens when you try to print The computer may be transferring pictures. Wait a few seconds, then try to again. (from computer) Access the printer menu for your system. Remove check marks next to Pause Printing and Offline, if checked. Close unnecessary software applications. Disconnect then reconnect the USB cable from the printer dock to the computer (page 23). Make sure Kodak EasyShare software is installed (page 20). Install if necessary. If you choose Custom installation, make sure to install the printer driver. Uninstall, then reinstall Kodak EasyShare software (page 20). Make sure your computer meets the minimum system requirements (page 20). Upgrade your system if necessary. Printing is slow NOTE: When printing a large number of prints, printing may slow down to prevent the
print head from overheating.
Make sure the printer dock is not placed in direct sunlight or is not
operating in a high-temperature environment.
Make sure the cooling vents are not blocked or dirty (page 1). Close unnecessary software applications. Make sure your computer meets the minimum system requirements
(page 20). Upgrade your system if necessary.
IMPORTANT: The color cartridge may lock in place if there is a paper Unable to error. Do not attempt to remove the cartridge without remove color cartridge (paper first clearing the paper error. Make sure the Paper light is light may glow off before attempting to remove the cartridge (see Paper steady amber or light under Printer dock status lights, page 41). blink) Check to see if the paper tray is empty or if paper is missing perforated tabs. Reload paper if necessary (page 6), then try again. Make sure paper is not jammed. Clear the jam if necessary (page 34), then try again. Disconnect then reconnect the power and try again. IMPORTANT: Upon reconnecting the power, the color cartridge may advance to the next picture slot on the ribbon, resulting in a supply mismatch (see below).
Paper runs out Supply mismatch can result from several different situations, including: before the color Scrapping of paper as a result of jams or other errors cartridge (or Gradual advancement of the color cartridge ribbon as a result of vice versa) removing ribbon slack or clearing jams Advancement of the color cartridge ribbon upon reconnecting power to unlock the color cartridge Supply mismatch is likely to occur as you continue to use your printer dock. If you wish to keep your cartridge and paper supply synchronized, discard unused cartridge or paper when one or the other is fully depleted.

Picture Size lights Light status One light glows steady green Cause The indicated picture size is available and selected. Action/solution None required. To change picture size, press the Picture Size button repeatedly.

All lights are off

There are no pictures in the camera, To enable the picture size on the card, or on the PictBridge option: compatible device. 1 Take pictures. The camera is not docked, a 2 Dock the camera or compatible Kodak card reader or connect a compatible PictBridge compatible device is not Kodak card reader connected, or a memory card is not (page 14) or PictBridge inserted. compatible device (page 13). If using a card reader, make sure a memory card is inserted. The camera is not properly seated on the connector. Reseat the camera on the printer dock (page 10).
The camera or card reader is None required. transferring pictures to the computer, or has established an active connection to the computer.
Transfer button/light Light status Light glows steady green Light blinks green Cause The printer dock is ready for transferring pictures. Action/solution None required.
Pictures are being transferred None required. to the computer. After transferring pictures, the transfer light continues to blink green until either the Transfer button is pressed again or the connection is no longer available. There are no pictures in the camera or on the memory card. None required. To enable Transfer: 1 Connect printer dock to computer (page 23).

Light is off

The camera is not docked, a compatible Kodak card reader 2 Take pictures. is not connected, or a memory 3 Dock the camera, or connect a card is not inserted. compatible Kodak card reader The printer dock is not (page 14). If using a card reader, connected to the computer. make sure a memory card is inserted. The camera is not properly seated on connector.
Reseat the camera on the printer dock (page 10).
The printer dock is printing in The Transfer button is disabled. standalone mode. The computer is off. Turn on the computer.
Still having problems? Visit www.kodak.com/go/support, or see Chapter 8, Getting help, or contact your camera manufacturer. 46

Printer dock

Getting help
Get support for your product (FAQs, troubleshooting information, etc.) www.kodak.com/go/printerdocks

Helpful links

Purchase full range of digital camera and www.kodak.com/go/accessories dock accessories. Download latest printer dock software, www.kodak.com/go/printerdockdownlo firmware and drivers ads See online tutorials www.kodak.com/go/howto Software Get information on EasyShare software www.kodak.com/go/easysharesw (or click the Help button in the EasyShare software) Get help with the Windows operating www.kodak.com/go/pcbasics system and working with digital pictures Other Get support for Kodak docks, cameras, software, accessories, more Get information on Kodak EasyShare printer docks Get information on Kodak inkjet products Optimize your printer for truer, more vibrant colors Register your printer dock www.kodak.com/go/support www.kodak.com/go/printerdocks www.kodak.com/go/inkjet www.kodak.com/go/onetouch www.kodak.com/go/register

Telephone customer support
If you have questions concerning the operation of the software or printer dock, you may speak with a customer support representative. Before you call, have the camera or dock connected to your computer. Be at your computer, and have the following information available:
Computer model, Operating system Processor type and speed (MHz) Amount of memory (MB) & free hard disk space
Greece Hong Kong India Italy
Printer dock and camera serial numbers Version of Kodak EasyShare software Exact error message you received
Spain Sweden Taiwan Thailand 7260
Australia 701 Austria Belgium Brazil Canada China 150000

5540 9002

Switzerland 53 51
Japan 6027 Korea Netherlands
0024 UK 9372 US Outside US
Denmark Indonesia Ireland Finland France 1 17056
New Zealand 786 Norway 21 33
International +458 Toll Line 6714
Philippines / 9600 International +Metro Manila / Toll Fax 6363 036

Portugal

Germany 0035 Singapore
Visit: http://www.kodak.com/US/en/digital/contacts/DAIInternationalContacts.shtml 48

Appendix

Printer dock specifications
For more specifications, visit www.kodak.com/go/printerdocks.
Printer dock specifications Printing process Thermal dye transfer Operating environment (for Temperature: 50 to 95 F (10 to 35 C) optimum picture quality) Humidity: 10% to 86% RH Power Output: 24 V DC Input: 100 V to 120V AC @ 50/60 Hz, via AC power adapter (US and Canada only) 100 V to 240V AC @ 50/60 Hz, via AC power adapter (all other countries) Consumption while printing: 60 watts maximum Approximately 90 seconds for full 4 x 6 in. print NOTE: First print may take an additional 25 seconds when printing from camera. Print speed is dependent on picture size, number of continuous prints, and environmental conditions. Without paper tray: 5.28 x 7.40 x 3.27 in. (134 x 188 x 83 mm) With paper tray: 12.17 x 7.40 x 3.27 in. (309 x 188 x 83 mm) Weight Print size Without paper tray: 33.5 oz (950 g) With paper tray: 38.4 oz (1090 g) 4 x 6 in. (102 x 152 mm) Paper size with perforated 4 x 7.25 in. (102 x 184 mm) tabs Picture resolution 300 ppi, continuous tone

Print speed

Important safety instructions

Using this product

Read and follow these instructions before using Kodak products. Always follow basic safety procedures. The use of an accessory attachment that is not recommended by Kodak, such as an AC adapter, may cause fire, electric shock, or injury. CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Do not expose this product to liquid, moisture, or extreme temperatures. Kodak AC adapters and battery chargers are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards.

Battery safety and handling
CAUTION: When removing batteries, allow them to cool first; batteries may be hot.
Read and follow all warnings and instructions supplied by the battery manufacturer. Use only batteries that are approved for this product. Keep batteries out of the reach of children. Do not allow batteries to touch metal objects, including coins. Otherwise, a battery may short circuit, discharge energy, become hot, or leak. Do not disassemble, install backward, or expose batteries to liquid, moisture, fire, or extreme temperature.
Replace all batteries of a set at the same time. Do not mix new batteries with used ones. Do not mix rechargeable and non-rechargeable batteries. Do not mix lithium, Ni-MH, and Ni-Cd batteries together. Do not mix batteries of different chemistry types, grades, or brands. Failure to observe this precaution may cause leakage. Remove batteries when the product is stored for an extended period of time. In the unlikely event that battery fluid leaks inside the product, contact your local Kodak Customer Service representative. In the unlikely event that battery fluid leaks onto your skin, wash immediately with water and contact your local health provider. For additional health-related information, contact your local Kodak Customer Service representative. Dispose of batteries according to local and national regulations. If the battery contacts touch metal objects, the battery may short-circuit, discharge energy, become hot, or leak. Do not charge non-rechargeable batteries.
For more information on batteries, see www.kodak.com/global/en/service/batteries/batteryUsage.jhtml
Upgrading your software and firmware
Download the latest versions of the software included on the Kodak EasyShare software CD and the printer dock firmware (the software that runs on the printer dock). Visit www.kodak.com/go/printerdockdownloads.
Additional care and maintenance
Do not allow chemicals, such as suntan lotion, to come into contact with the painted surface of the printer dock. If the printer dock has been subjected to inclement weather or you suspect water has gotten inside the printer dock, turn off the printer dock and remove the paper tray and color cartridge. Allow all components to air-dry for at least 24 hours before using the printer dock again. If this does not resolve the problem, contact customer support (see page 48). 51
Connect a tripod directly to the camera; do not connect a tripod to the camera dock or printer dock. Service agreements are available in some countries. Contact a dealer of Kodak products for more information. The printer dock and the AC power adapter contain a small amount of lead in the circuit board. Disposal of this material may be regulated due to environmental considerations. Disposal of the color cartridge is not regulated and should not be subject to state or local landfill, incineration, or recycling requirements. For more disposal or recycling information, contact your local authorities. In the US, visit the Electronics Industry Alliance Web site at www.eiae.org.

paper tray, i door, i installing, removing, 7 PictBridge compatible device, printing from, 15 picture size and number of copies, 16 button, i changing default, 16 lights, i, 45 printing different pictures on same sheet, 17 printing different sizes/layouts, 16 printing duplicate pictures on same sheet, 18 pictures automatic color correction of, 28 printing different pictures on same sheet, 17 printing duplicate pictures on same sheet, 18 printing from Kodak card reader, 14 printing from PictBridge compatible device, 15 printing tagged, 15 reviewing on camera, 13, 18 selecting number of copies, 12, 13, 16 setting quality, 12 tagging for automatic printing, 12 transferring from camera, 24 transferring from Kodak card reader, 25
power AC adapter & cord, 3 connecting, 3 connector (DC-in), ii, 3 print button/light, i, 44 print order bypassing, 15 creating on camera (tagging pictures), 12 printing, 15 printer driver installing, 20 updating, 47, 51 printing canceling, 19, 29 from a computer, 26 from applications, 27 from docked camera, 13 from Kodak card reader, 14 from PictBridge compatible device, 15 print order, 15 problems, 33 tagged pictures from computer, 27 tagging pictures for, 12 with Kodak EasyShare software, 26 Q quality setting on camera, 12 R recharging. See charging recycling and disposal of batteries, 50 of printer dock, 51
refresh button, i, 11 of Ni-MH rechargeable battery pack, 11 regulatory information Canadian compliance, 55 FCC compliance, 54 VCCI compliance, 55 requirements, system, 20 reviewing pictures on camera, 13, 18 S safety, 50 service and support, 48 setup color cartridge, 4 custom camera insert, 2 loading paper, 6 location for printer dock, 1 paper tray, 7 slot, paper path, ii software help, 47 installing, 20 Kodak EasyShare, printing with, 26 printing from applications, 27 system requirements, 20 uninstalling, 22 upgrading, 47, 51 specifications, 49 status lights, 41 supplies & accessories, ordering, 47 support, technical, 48 system requirements, computer, 20 59
T tagging pictures for printing, 12 telephone support, 48 transfer button/light, i, 46 transferring pictures from camera to computer, 24 from Kodak card reader, 25 problems, 40 traveling with printer dock, 32 tray, paper. See paper tray troubleshooting printing problems, 33 status lights, 41 transferring pictures, 40 U uninstalling software, 22 upgrading software & firmware, 47, 51 URLs, Kodak web sites, 47 USB cable, 14, 15, 23, 25 connector (from device), i, 14, 15, 25 connector (to computer), ii, 23 V VCCI compliance, 55 vents, cooling, ii W warranty, 52 Windows OS installing software on, 20 system requirements, 20 uninstalling software, 22 60