KODAK EASYSHARE Digital Frame
Extended user guide P725/P825
www.kodak.com For help with your digital frame, www.kodak.com/go/digitalframesupport
Eastman Kodak Company Rochester, New York 14650 Eastman Kodak Company, 2009 All screen images are simulated. Kodak and EasyShare are trademarks of Eastman Kodak Company. P/N 4H6588_en

Product features

Topbuttons and controls
Delete from frame Copy to frame Play speed/transition Slow w/Wipe Medium w/Pan Zoom Fast w/Fade Play order Shuffle By Date
Navigation Next picture OK/Play/Pause Previous picture

www.kodak.com/go/support

Sidepower and connectors
Power USB connector Memory card slot SD/SDHC/MMC/MS/XD Memory card slot MS/MS Pro Duo

Stand DC-in*

* See Attaching the power cable, page 1 and Attaching the stand, page 2.

Table of contents

1 Getting started...1
Attaching the power cable... 1 Attaching the stand.... 2 Turning your frame on and off... 2 Inserting a memory card... 3 Connecting a USB device... 3

2 Viewing pictures...4

Viewing pictures from internal memory... 4 Viewing pictures from a memory card.. 4 Navigating through your pictures.. 5 Changing play speed, transitions, and order.. 6
3 Doing more with your frame...7
Deleting pictures from the frame.. 7 Copying pictures to internal memory.. 8 Upgrading your firmware (recommended).. 9 Maintaining your frame... 10
4 Troubleshooting and support..11
Learning more about your frame... 11 Picture frame problems... 11 Identifying graphic messages... 13 Identifying error messages... 14

5 Appendix...15

Digital frame specifications... 15 Important safety instructions... 16 Additional care and maintenance... 17 Limited warranty.... 17 Regulatory compliance and advisory.. 19

Getting started

Welcome to your KODAK EASYSHARE Digital Frame. Viewing your pictures couldnt be simpler!
Attaching the power cable
CAUTION: Do not use this power cable with other devices, including digital cameras.
Your power cable may look different from the one pictured. Use the plug that accommodates your type of power outlet.

Attaching the stand

1 Snap the stand onto the frame. 2 Route the power cord through the

cutout in the stand.

Turning your frame on and off
Power button - press and hold (for about 2 seconds), then release
NOTE: Your frame may contain pre-loaded sample pictures, which play only when there are no other pictures loaded (from a memory card, USB device, or internal memory). Sample pictures may not be deleted.

Inserting a memory card

To insert a card, push it firmly into the slot until it clicks and stops. To remove a card, pull it out of the slot.
Top slot*: SECURE DIGITAL/SECURE DIGITAL High Capacity (SD/SDHC) MMC (MULTIMEDIA Card) XD MS (MEMORY STICK) Bottom slot: MS/MS Pro Duo (MEMORY STICK)
*IMPORTANT: Do not insert an MS Pro or MS Pro Duo card in the top slot. It may be difficult to remove.

Connecting a USB device

Supported USB devices include a flash drive, card reader, hard drive*, etc. USB devices and cables are sold separately. * External hard drives must be self-powered and formatted as FAT32.

Viewing pictures

Pictures play from the frames internal memory when no card or USB device is inserted. Pictures play from a memory card or USB device when one is inserted in the frame. NOTE: Your frame may contain pre-loaded sample pictures, which play only when there are no other pictures loaded (from a memory card, USB device, or internal memory). Sample pictures may not be deleted.
Viewing pictures from internal memory
Turn on the frame. The pictures in your frames internal memory play automatically. NOTE: Make sure no memory card or USB device is inserted in the frame. To copy pictures into the frames internal memory, see page 8.

Viewing pictures from a memory card
Turn on the frame. Insert a memory card, USB flash drive, or other USB device (see page 3). Your pictures start playing automatically.
Navigating through your pictures
Press the arrow buttons to navigate through your pictures.

Previous picture

Next picture

Play/Pause

Navigation and play buttons To move more quickly through your pictures, press and hold an arrow button. Previous pictureGo to the previous picture. Play/PauseStart or pause play. Next pictureGo to the next picture.
Changing play speed, transitions, and order
Move the sliders to change the setting.

Play speed/transition

Play order
Play speed and transition
Change how long each picture stays on the screen and the type of transition between pictures.
Slowpictures change every 60 seconds, with wipe transition. Medium (default)pictures change every 10 seconds, with pan and zoom transition. Fastpictures change every 5 seconds, with fade transition.
Change the order in which your pictures play.
Shuffle (default)pictures play in random order. By datepictures play by date, from oldest to newest.
Doing more with your frame
Deleting pictures from the frame
You can delete pictures from your frames internal memory, but not from a memory card or USB device. 1 Remove a memory card or USB device from the frame, if inserted. 2 While pictures are playing from internal memory, press the Delete button.
3 Select the pictures to delete:
To delete the currently displayed picture: Press the Next arrow button once to. highlight Delete single
Delete all Delete single Exit delete
To delete all of the pictures in the current picture source: Press the Next arrow button twice to highlight Delete all.
4 Press OK to confirm the deletion.
Copying pictures to internal memory
Copy pictures from a memory card or USB device into your frames internal memory. Copying to a memory card or USB device is not supported. CAUTION: Removing a card or disconnecting a device while copying may damage your card, pictures, or device. 1 Insert a memory card or USB device (flash drive, card reader, hard drive). See page 3. The pictures start playing. 2 Press the Copy button.

The copy screen shows where you are copying from. (Example - from SD card to internal memory ) 3 Select the pictures to copy:
To copy the currently displayed picture: Make sure Copy single is highlighted. If not, press the Next arrow button to highlight it.
Copy all Copy single Exit Copy Copying from here
To copy all of the pictures on the card or USB device: Press the Next Copy all. arrow button to highlight
4 Press OK. NOTE: Copies are automatically resized to a lower resolution (smaller size). Full resolution is unnecessary for viewing and quickly fills up the frames memory.
Upgrading your firmware (recommended)
Firmware is the software that runs on your frame. Download and install the latest version from the Web to keep your frame up to date.
Check your frames current firmware version
Turn your frame on. Press the Power and the Next buttons at the same time and hold for 5 seconds. Note the firmware version listed on the About screen.
Download the latest firmware
1 On your computer, go to www.kodak.com/go/digitalframedownloads. 2 Enter your frame model and note the firmware version thats available for download. If its newer than the version on your frame, continue with these download and upgrade directions. 3 Follow the screen directions to download the frame firmware to your computer. 4 When the firmware is downloaded, copy the IMG file to the root directory (top level, not in a folder or subfolder) of a memory card or USB flash drive.

Upgrade your frame

1 Remove the memory card or USB flash drive from your computer, then insert it into the frame. The Install Firmware screen appears on your frame. This screen only appears when the firmware upgrade file (IMG) is present on the card or device. 2 Highlight the newer firmware version, then press OK to begin the upgrade.
IMPORTANT: Do not turn off the frame or remove the memory card or USB flash drive during the upgrade! When the upgrade is complete, your frame automatically restarts. If it doesnt, turn the frame off, then back on.

Maintaining your frame

IMPORTANT: Always disconnect the power before cleaning. Do not use water, cleaning solutions, or other adhesives on the frame or any of its parts. Gently wipe the frame and screen with a clean, dry, lint-free cloth. For fingerprints on the frame, apply light pressure.
Troubleshooting and support
For step-by-step product support, visit www.kodak.com/go/digitalframesupport, select your frame model, and select Step-by-Step Solutions & Repair.

Learning more about your frame
www.kodak.com/go/digitalframes Learn more about your frame www.kodak.com/go/digitalframesupport Interactive tutorials Frequently asked questions Downloads Product registration

Picture frame problems

If. Frame does not turn on. Try one or more of the following
Make sure the power cable that was included with your frame is
connected securely (see page 1).
Unplug the power cable for 5 seconds, then reconnect the cable.
Press and hold the power button (for about 2 seconds), then release. Frame freezes up or Unplug the power cable for 5 seconds, then reconnect the cable. Press and hold the power button (for about 2 seconds), then doesnt work properly. release. Reset the frame. Press the Play and Power buttons (see page i) at the same time, and hold for 5 seconds. (Resetting your frame does not erase your saved files.)
If. Try one or more of the following
Nothing happens when Insert a certified SD/SDHC/MMC/XD Card, with images, into the upper designated card slot, then push to seat it (see page 3). a memory card or USB device is connected. Insert a certified MS/MS Pro Duo Card, with images, into the lower designated card slot only, then push to seat it (see page 3). NOTE: Do not insert an MS Pro or MS Pro Duo card in the top slot. It may be difficult to remove. Make sure the USB device is connected securely (see page 3). Make sure the file format of your pictures is supported. (See page 15). NOTE: Pictures may take a longer time to display when the files are large or when using a large capacity memory card or other connected device.
Identifying graphic messages
Graphics appear on the screen to let you know whats happening with your pictures and your frame.

Graphic

Description Internal memorythe current picture source is the frames internal memory. Memory cardthe current picture source is an inserted memory card. USB devicethe current picture source is a USB flash drive or other USB device. Pausepicture play is paused. Copyappears when you press the Copy button (see page 8). Default selection is Copy single picture. Deleteappears when you press the Delete button (see page 7). Default selection is Exit delete. Copy complete Delete complete Deleting from a card or USB device is prohibited. You may only delete pictures from the frames internal memory.
Identifying error messages
Error icon and meaning The card/device is empty.
Insert a different card or device with pictures (see
Try one or more of the following
The card/device is unreadable or corrupt.

page 3).

File is corrupted or its an See page 15 for supported file formats. unsupported file format. Internal memory is full, unable to copy.

Delete pictures from internal memory (see

page 7).

Copy errorno memory Insert a memory card or USB device and press the Copy button again. card or USB device is inserted. Copy error.
Recopy the picture to a different memory card or

USB device.

Turn off the frame, then turn it back on. Insert the
card or device in the frame. Try the copy again. If the problem persists, contact customer support help, at www.kodak.com/go/digitalframesupport. Delete error.
Turn off the frame, then turn it back on. Try the delete again. If the problem persists,
contact customer support help, at www.kodak.com/go/digitalframesupport. Unknown error.
Turn off the frame, then turn it back on. If the
problem persists, contact customer support help, at www.kodak.com/go/digitalframesupport.

Appendix

Digital frame specifications
For more specifications, visit www.kodak.com/go/digitalframesupport.
KODAK EASYSHARE P725/P825 Digital Frames Color display P725 P825 17.8 cm (7 in.) diagonal digital LCD, 800 x 600 pixels, 4:3 aspect ratio, 14.2 x 10.6 cm (5.6 x 4.2 in.) active area 20.3 cm (8 in.) diagonal digital LCD, 800 x 600 pixels, 4:3 aspect ratio, 16.2 x 12.2 cm (6.4 x 4.8 in.) active area 512 MB Manufacturer, Model #: Malata MPA-05015, EIAJ class 2 DC plug Input: 100-240V AC 50/60 Hz. Output: 5V DC 1.5 Amp
Internal storage capacity P725, P825 Power supply P725 P825
Communication with USB devices USB 2.0 High Speed Type A Other features Picture formats Memory cards see page 3 Temperature JPEG, EXIF 2.2 Top card slot: SD (SECURE DIGITAL); MMC (MULTIMEDIA Card); XD; MS (MEMORY STICK) Bottom card slot: MS (MEMORY STICK)/MS Pro Duo Operating: 32 to 104 F (0 to 40 C) Storage: -25 to 160 F (-32 to 71 C)
KODAK EASYSHARE P725/P825 Digital Frames Size Weight P725: 17.3 x 14.2 x 6.4 cm (6.8 x 5.6 x 2.5 in.) P825: 20.3 x 16.5 x 6.6 cm (8 x 6.5 x 2.6 in.) P725: 441 gm (1.0 lb.) includes frame, stand, and AC adapter P825: 599 gm (1.3 lb.) includes frame, stand, and AC adapter
Important safety instructions
CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. KODAK AC Adapters and Battery Chargers are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support.
The use of an accessory that is not recommended by Kodak may cause fire, electric shock, or injury. For approved accessories, visit www.kodak/go/accessories. Use only the AC adapter that was packaged with your frame. Use of other AC adapters may damage the frame and void your warranties. Do not place frame near open flame sources such as lighted candles or heaters. Do not expose this product to liquid, moisture, or extreme temperatures.

Additional care and maintenance
To clean the frame or screen, use a soft, lint-free cloth dampened with lens cleaning solution or a water-based cleaning solution. Use light pressure. Do not allow chemicals, such as suntan lotion, to contact painted surfaces. Service agreements are available in some countries. Contact a dealer of Kodak products for more information. For digital frame disposal or recycling information, contact your local authorities. In the US, visit the Electronics Industry Alliance at www.eiae.org or visit www.kodak.com/go/digitalframesupport.

Limited warranty

Kodak warrants Kodak consumer electronic products and accessories (Products), excluding batteries, to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair.
Limited warranty coverage
Warranty service is only available from within the country where the Products were originally purchased. You may be required to ship Products, at your expense, to the authorized service facility for the country where the Products were purchased. Kodak will repair or replace Products if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak along with proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole remedies under the warranty. If replacement parts are used in making repairs, those parts may be remanufactured, or may contain remanufactured materials. If it is necessary to replace the entire Product, it may be 17
replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer.

Limitations

This warranty does not cover circumstances beyond Kodak's control. This warranty does not apply when failure is due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with incompatible accessories or attachments (such as third party ink or ink tanks), failure to follow Kodak's operation, maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters and cables), or claims made after the duration of this warranty. Kodak makes no other express or implied warranty for this product, and disclaims the implied warranties of merchantability and fitness for a particular purpose. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the purchase date or such longer period as required by law. The option of repair, replacement, or refund is Kodak's only obligation. Kodak will not be responsible for any special, consequential or incidental damages resulting from the sale, purchase, or use of this product regardless of the cause. Liability for any special, consequential or incidental damages (including but not limited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services, or claims of your customers for such damages resulting from the purchase use or failure of the Product), regardless of cause or for breach of any written or implied warranty is expressly disclaimed.

Your rights

Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction.
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.
Regulatory compliance and advisory
FCC compliance and advisory
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation.

Canadian DOC statement

DOC Class B ComplianceThis Class B digital apparatus complies with Canadian ICES-003. Observation des normes-Classe BCet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.
Hereby, Eastman Kodak Company declares that this Kodak Product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Licensing

Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), streaming applications (via Internet, intranets and/or other networks), other content distribution systems (pay-audio or audio-on-demand applications and the like) or on physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for such use is required. For details, please visit http://mp3licensing.com.

Australian C-Tick

Waste Electrical and Electronic Equipment labeling
In Europe: For human/environmental protection, it is your responsibility to dispose of this equipment at a collection facility established for this purpose (separate from municipal waste). For more information, contact your retailer, collection facility, or appropriate local authorities; or visit www.kodak.com/go/recycle. Product weight with adapter and stand: P725, 441 gm. P825, 599 gm

Russian GOST-R

Eastman Kodak Company Rochester, New York 14650

VCCI Class B ITE

Korean Class B ITE

China RoHS

A AC adapter attaching, 1 safety information, 16 specifications, 15 appendix, 15 B By date play order, 6 C cable power, connecting, 1 USB, connecting, 3 card, memory inserting, 3 slot, ii supported types, 15 viewing pictures from, 4 cleaning frame, 10, 17 copying to internal memory, 8 D delete pictures, 7 disposal, recycling, 17 download firmware, 9 duration, changing, 6 E error icons, 14 F file formats, supported, 15 firmware, upgrading, 9 flash drive connecting, 3 viewing pictures from, 4 frame, picture resetting, 11 specifications, 15 troubleshooting, 11 turn on/off, 2 freeze or lock screen, reset, 11 G graphic messages, 13

H help frame, 11 support URLs, 11 troubleshooting and support, 11 I icons, screen, 13 inserting memory cards, 3 USB device, 3 internal memory capacity, 15 copying into, 8 playing from, 4
L locked screen, reset, 11 M memory card. See card, memory messages on screen, 13, 14 N navigating through pictures, 5 next play, 5 P pictures copying to internal memory, 8 deleting, 7 navigating through, 5 playback speed, 6 sample, pre-loaded, 4 viewing, 4 play by date, 6 play/pause button, 5 playing pictures, 4 power button, 2 connecting, 1 power supply, specifications, 15 previous play, 5 R recycling, disposal, 17 regulatory compliance, 19 reset frame, 11 S safety information, 16
screen cleaning, 10, 17 error icons, 14 settings, changing, 6 shuffle play, 6 specifications, frame, 15 speed, changing play, 6 stand, attaching, 2 storage capacity, internal memory, 15 T thumb drive. See flash drive. transitions, changing, 6 troubleshooting error messages, 14 frame, 11 turn on frame, 2 U upgrade firmware, 9 USB device, connecting, 3 type, 15 W warranty, 17 Web sites, help, 11

P825_DATASHEET_18550915_JULY09_EN

EasyShare P825

Digital Frame
Quality and value wrapped into one perfect gift.
Shopping for that person who has everything? The Kodak EasyShare P825 Digital Frame makes finding the right gift simpler than ever. Everyone loves to relive favourite memories and because of Kodak Colour Science Technology, those memories will be as vivid as the moment they happened. If youre looking for something special, look to the name you know and trust. Give them a Kodak EasyShare P825 Digital Frame, and turn you shouldnt have into so happy you did.
Give a frame as a personalised gift by including your own pictures to get the show started Enjoy stunning picture quality the 8" (20.3 cm) high resolution 4:3 viewing screen features proprietary Kodak Colour Science Technology for crisper detail and more vibrant colours Plug-and-play just insert your memory card or USB flash drive with your digital pictures and your slide show automatically begins Store up to 4,000 pictures* with 512 MB internal memory and keep your entire picture collection on your frame. Pictures are automatically resized to fit more on the frame Efficient power consumption and mercury-free displays make KODAK Frames easy on the environment Customise the way you see pictures with three different transitions and duration times to choose from
18550915_P825_DataSheet_UK.indd 1

5/8/09 15:56:10

Without Kodak Colour Science
Stunning picture quality with proprietary Kodak Colour Science Technology.
Plug-and-play just insert your memory card or USB flash drive with your digital pictures and your slide show automatically begins.
Store up to 4,000 pictures* (512 MB).
Specifications Image file formats: JPEG, EXIF Weight (without power supply): 452 g (15.9 oz.) Dimensions: 6.5 x 8.0 x 2.6" (16.5 x 20.3 x 6.6 cm) Display size: 8" (20.3 cm) diagonal Display area: 6.4 x 4.8" (16.2 x 12.2 cm) Display resolution: 800 x 600 pixels Aspect ratio: 4:3 Display type: aSi TFT active matrix Display backlight: LED Display brightness: 270 NITs (typical) Contrast ratio: 500:1 (typical) Memory cards supported: Secure Digital (SD)/SDHC, MultiMedia Card (MMC), Memory Stick (MS), MS Pro/MS Pro Duo, xD-Picture Card (xD)
Power consumption: 4.8 watts (frame running in slide show mode) Power supply: V AC, Hz, 5 V DC 1.5 Amp, EIAJ Class 2 DC plug Operating temperature: 32 to 120 F (0 to 49 C) Storage temperature: 32 to 160 F (0 to 71 C) Warranty: One year Package contents Kodak EasyShare P825 Digital Frame with Stand Power supply with 1.8 m cord AC plug Quick Start Guide
* Actual storage capacity will vary based on image content.
USB mass storage: USB Hi-Speed Type A Internal memory: 512 MB
For more information on the Kodak EasyShare P825 Digital Frame, visit www.kodak.com/go/easyshare
18550915_P825_DataSheet_UK.indd 2 18545285_P730_PPI_UK
filename project job no publication size route operator date
05/01/x 297mm (+3mm BLEED) K / KODAK_EAME / CAPTURE_2009 / P Ser. P730 PPIsheet 18545285

5/8/09 15:56:15

account director creative director designer copy writer account manager art director artworker jason rich cmyk pantone

pages 2

18550915/07/09/EN
odak, 2009. KODAK and EASYSHARE are trademarks of Kodak. K Product specifications subject to change without prior notice. Simulated images.