Careful!

Battery acid could leak out, especially if the batteries are old. Therefore you should remove all batteries if you do not plan to use the scales and remote control unit for long periods of time. This protects the scales and display remote control unit from damages resulting from battery acid leakage.
Avoid static charge or discharge because this could result in display errors or sudden switching off of the scales. No liability will be taken and no guarantee will be made for damages

| Warning!

Do not place the scales and display remote control unit in the immediate vicinity of heat sources such as ovens, heaters and other similar devices. Otherwise the scales and display remote control unit can be damaged beyond repair. The scales and display remote control unit can only be operated at temperatures be4
resulting from opening the casings of scales and/or display remote control unit resulting from repair attempts not made by qualified experts resulting from using the scales and/or display remote control unit for purposes other than intended

IB KH5509-10 UK.indb EN4

2. Usage
The body fat, muscle mass and water analysis scales Balance KH /KH are intended exclusively for

3. Technical data

measuring body weight, body fat, muscle mass and body water of people from seven years of age and a height of at least centimeters measuring the approximate daily caloric requirements non-commercial use in private households.
The body fat, muscle mass and water analysis scales Balance KH /KH are not intended for use by those using medical devices including but not limited to
pacemakers respirators or electrocardiographs.
The body fat, muscle mass and water analysis scales Balance KH/KH are not construed for professional use in hospitals or other medical facilities.

No liability will be assumed and no warranty granted for damages resulting from use of the scales and/or display remote control unit for purposes other than intended!
Power supply, scales: . V AA Power supply, display remote control unit: . V AAA Maximum load/maximum measurable weight: kg/ lb Minimum measurable weight: kg/. lb Tolerance < kg: max. g Tolerance > kg: % +/- , kg Measuring procedure: bioelectrical impedance analysis via four foot sensors Increments for weight measurement:. kg/. lb Fat percentage measurement: % Increments for fat percentage measurement: , % Water percentage measurement: % Increments for water percentage measurement: , % Muscle mass percentage measurement: % Increments for muscle mass percentage measurement: , % Caloric requirements display: in kcal Increments for caloric requirements display: kcal Height entry range: - cm/'"'" Age entry range: years memory locations for personal data Functions: Weight measurement only/ weight, body fat percentage, muscle mass percentage and body water percentage measurement/measurement of approximate daily caloric requirement/display of approximate fitness level Measuring units adjustable: kg/lb, cm/ inches Battery status indicator Overload indicator Error indicator Automatic shutoff of scales: after seconds Automatic shutoff of display remote control unit: after seconds

IB KH5509-10 UK.indb EN5

09.01.2006 16:12:25 Uhr
Operating temperature: C C
4. Scope of delivery ' ' ' ' ' ' ' '
Body fat, muscle mass and water analysis scales Display remote control unit AA/Mignon type batteries for scales AAA/Micro type batteries for display remote control unit double-sided adhesive tape, screws and rawl plugs for wall mounting of display remote control unit Wall Holder for the Display remote control unit Accompanying informational material These instructions for use
5. Components and operating elements
5.1. Display remote control unit

q w e r t y u

Button (Down) Button Button (On/Off ) Button (Up) Battery compartment Infrared receiver Wall Holder for the Display remote control unit

5.2. Scales

i o a 1!
Scales on/off indicator Sensors Battery compartment Holder for display remote control unit

IB KH5509-10 UK.indb EN6

6. Preparing the scales for use
6.1. Unpacking the components
careful not to drop the display remote control unit.
Remove the protective plastic from the two included batteries of type AAA/Micro. Place the display remote control unit face down. The back of the display remote control unit with the battery compartment should now be facing you. Take the cover off the battery compartment. Insert the two AAA/Micro type batteries in the battery compartment. Make sure that the batteries are facing the right direction with regards to polarity (+/) in the battery compartment. The right polarity is depicted on the inside of the battery compartment. Place the cover back on the battery compartment and close it. Turn the scales over so that the top is facing you.
Carefully remove the scales from the packaging. Please make sure that the display remote control unit does not fall out of its holder on the scales. Do not drop the scale and display remote control unit! Otherwise they could be damaged beyond repair.
6.2. Inserting the batteries in the scales
Remove the protective plastic from the four included type AA/ Mignon batteries. Carefully place the scales with the top facing down. Use a towel or other soft material between the scales and the floor to pad the scales and prevent the device from being scratched. The bottom of the scales with the battery compartment should now be facing you. Take the cover off the battery compartment. Insert the four batteries in the battery compartment. Make sure that the batteries are facing the right direction with regards to polarity (+/) in the battery compartment. The right polarity is depicted on the inside of the battery compartment. Place the cover back on the battery compartment and close it. Leave the scales lying upside down.
The scales and the display remote control unit are now operational.

7. Selecting a suitable location
Only place the scales on a level, flat, scratchproof, non-slip surface. The display remote control can be assembled on a wall above the scales with or without a wall holder. This is an alternative should the scales only be used exclusively at one location. For the assembly of the wall holder / display remote control use either the double-sided adhesive tape or both of the supplied plugs and
6.3. Inserting batteries in the display remote control unit
Push the display remote control unit out of its holder on the back of the scales. Be

IB KH5509-10 UK.indb EN7

09.01.2006 16:12:26 Uhr
screws. Take note that there should be no impediments between the scales and the infrared receiver of the display remote control. Otherwise it could malfunctions with the display remote control. If you wish to secure the wall holder with the plugs and screws, with the assistance of the wall holder transfer the correct distance between the boreholes to the wall. Small drilling mistakes can be evened out with the help of the slotted holes.
Take the display remote control unit in your hand and press the on/off button once. Balance will be displayed moving across the screen. Press and hold the i button until - is displayed on the screen. As soon as you release the i button, the number of one of the ten memory locations will be displayed on the screen. You can choose one of the other ten memory locations by pressing the up and down buttons. Press the i button as soon as the desired memory location is displayed on the screen. Now either lb or kg will blink on the display screen. Press the up and down buttons to switch between weight display in kg and height display in cm according to the metric system and weight display in lb (pounds) and height display in feet and inches according to the British measurement system. Once the desired display mode (lb or kg) is displayed, press the i button.
Please make sure no water or moisture can enter the scales or display remote control unit. Otherwise the scales and display remote control unit can be damaged beyond repair. This could also cause danger of electric shock!
Do not place the scales and display remote control unit in the immediate vicinity of heat sources such as ovens, heaters and other similar devices. Otherwise the scales and display remote control unit can be damaged beyond repair. The scales and display remote control unit can only be operated at temperatures between and Celsius. The scales should be kept within this temperature range even while not being used. Temperatures outside of this range can result in malfunctioning or long-term damages.

8. Prior to initial use

Before using the scales for the first time, you should enter your personal data. Ten memory locations are available for storing your personal data. To store your personal data:
Now the symbol for woman or the symbol for man will appear on the display screen. You can switch between the two symbols by pressing the up and down buttons. Select appropriate symbol by pressing the i button. Age will be displayed and a number between and will blink on the screen. Choose the number corresponding to your age by pressing the up or down buttons. Upon entering an age

IB KH5509-10 UK.indb EN8

between and , the child symbol will be displayed on the lower right edge of the screen between and , the adult symbol will be displayed on the lower right edge of the screen Once the number corresponding to your age appears in the display, press the i button.
ble deciding between two categories: select the category with lower amount of physical strain.
The height indicator blinks on the display screen. Press the up or down button to select a value corresponding to your height. Press the i button as soon as the appropriate value is displayed. The number of the memory location, in which you stored your personal data, blinks on the screen. Now you can enter the personal data of other people in other memory locations. To do this select another memory location by pressing the up or down buttons. Subsequently repeat steps to. end the process of entering personal data. Briefly press the on/off button once to turn off the display remote control unit.
The symbol for everyday physical strain will blink on the right side of the display screen. The symbol stands for people who primarily carry out their daily activities seated. This includes people who work sitting in an office or occupational drivers. stands for people who primarily carry out their daily activities standing or walking. This includes groups such as sales people or restaurant personnel. for people exposed to excessive physical strain. This includes many occupations with high physical exertion. for people exposed to extreme physical strain. In addition to serious athletes, this could include other occupations with extreme physical strain such as miners. Switch between the symbols by briefly pressing the up and down buttons. Select the symbol corresponding to the category which most accurately fits your everyday physical strain. Press the i button as soon as the appropriate symbol is displayed on the screen.

9. Using the scales

9.1. Measuring body weight only
To simply measure your current body weight:
Press the on/off button to turn on the display remote control unit. Balance and will appear on the display screen. Lightly touch the top of the scales with your foot. The on/off indicator on the scales should be illuminated in red. After a few seconds the on/off indicator will turn green and. kg will appear in the display screen. To switch between display of the body weight in kg and lb (pounds/English measurement system): Briefly press the i button.

Most people tend to overestimate their actual daily physical strain. If you are having trou-

Stand on the scales.

IB KH5509-10 UK.indb EN9

09.01.2006 16:12:27 Uhr

Never stand on only one side of the scales. Always stand in the middle of the scales with both feet. Then place your feet on the right and left sensors. Otherwise the scales can tilt to the side and be damaged beyond repair. You could also fall! Please make sure that the surface of the scales is dry before you stand on it. Otherwise you could slip down!
If no new body weight measurement is carried out within seconds, then the scales will turn off automatically. The display remote control unit will turn off automatically after seconds if no buttons are pressed.
9.2. Measuring body weight, body fat, muscle mass and body water percentages as well as caloric requirement
9.2.1. Important notes on measuring Use the scales without clothes on if possible. This results in the most accurate measurements. Always stand on the scales without shoes and socks on. Otherwise it is not possible to measure body fat, body water, muscle mass and caloric requirement. Furthermore the displayed body weight will be higher than your actual body weight. Body weight, body fat and body water percentages are not subject to considerable fluctuation within a single day. These natural fluctuations can result in considerable differences between measurements taken at different times of the day. Therefore you should make sure to carry out measurements
Do not place a load of more than kilograms on the scales! Otherwise the scales could be damaged beyond repair!
Use the scales without clothes on if possible. This results in the most accurate measurements. Stand on the scales without shoes and socks on. Otherwise the measurements may be incorrect.
Your body weight appears in the display screen. The body weight display can fluctuate while measurements are being taken. Therefore you should stand as still as possible. After a few seconds a blinking H will appear to the left of the weight display on the screen. The measuring process is complete when the H stops blinking. The weight displayed is your current body weight. If you remain standing on the scales, the device will automatically shut off after seconds. If you step down from the scales,. kg will appear again on the display screen after a few seconds. The scales are now ready for further body weight measurement.
under the same conditions and at the same time of day.
Otherwise the measurements can not be compared. Differing measurement values could be related to differing conditions for measurement and not to actual changes. The most accurate and realistic measurement values can be obtained in the early evening. Furthermore you should always carry out measurement before mealtimes. Large discrepancies between the measured values and the actual values can be more likely for the following groups of people:

IB KH5509-10 UK.indb EN10
children under seven years of age and with a height of less than cm Women going through menopause High-performance/professional athletes People suffering a flu or fever People with swelling in their legs People with osteoporosis Pregnant women Dialysis patients
Press the up button once. - appears on the display screen. Subsequently the number of one of the memory locations for personal data will blink on the screen. Select the memory location of your own personal data by pressing the up or down button. Press the i button when the memory location number corresponding to your personal data is displayed on the screen. Stand on the scales. Make sure that your feet are on the scales sensors. All measurements will be carried out.
Measurement of body fat, muscle mass and body water percentages as well as caloric requirement is not recommended for these groups of people due to expected false results. However, use of the scales does not represent a health risk for any of the above mentioned groups of people. To measure
the body weight, the percentage of body fat, the percentage of muscle mass and the percentage of body water as well as your personal daily caloric requirement: Press the on/off button to turn on the display remote control unit. Balance and will appear on the display screen. Lightly touch the top of the scales with your foot. The on/off indicator on the scales should be illuminated in red. After a few seconds the on/off indicator will turn green and. kg will appear in the display screen.
Do not place a load of more than kilograms on the scales! Otherwise the scales could be damaged beyond repair! The body weight appears in the lower part of the display screen. The body weight display can fluctuate while measurements are being taken. Therefore you should stand as still as possible. After a few seconds a blinking H will appear to the left of the weight display on the screen. The measuring process is complete when the H stops blinking. The weight displayed is your current body weight. Remain standing calmly on the scales.
IB KH5509-10 UK.indb EN11

09.01.2006 16:12:28 Uhr

Four rotating zeros are displayed in the upper section of the display screen. This indicates that the measurement process for body fat, muscle mass and body water percentages as well as caloric requirement is being carried out. As soon as the measurement process is complete, the following information will appear in sequence in the upper section of the display screen:

Fig. 5a: Display of body fat percentage and body weight
and the percentage of your body weight which is body fat and the percentage of your body weight which is body water and the percentage of your body weight which is muscle mass and your daily caloric requirement in kilocalories (kcal) Your body weight will continue to be displayed in the lower section of the display screen. The four values will continue to be displayed until the scales are automatically shut off. Your general health condition is depicted by a symbol in the lower left corner of the display screen. The following displays are possible:
Fig. 5b: Display of body water percentage and body weight
Fig. 5c: Display of muscle mass percentageand body weight
Fig. 5d: Display of daily caloric requirementand body weight
The percentual displays of body fat, body water and muscle mass elements must be considered individually. The sum of the measured results can exceed %, as the muscle and fat tissue elements also contain a water element.
Under fat Healthy Over fat Obese
If you would like to track the development of your body fat, muscle mass and body water percentages over a period of time: Write down the displayed measurement results in a table after each measurement. We recommend comparing your measurement results with the tables in the accompanying informational material to gain a better understanding of the values.
IB KH5509-10 UK.indb EN12
This informational material includes average values for body fat, body water and muscle mass percentages according to age and gender.
If you remain standing on the scales, the device will automatically shut off after seconds. If you step down from the scales,. kg will appear again on the display screen after a few seconds. The scales are now ready for further body weight measurement.
up or down button briefly. Each time you press one of these buttons, one of the measurement areas (body fat percentage, muscle mass percentage, body water percentage and caloric requirement) are displayed. The current measurement result is displayed for each measurement area and the previous measurement result blinks in the display screen.
9.4. Display previous measurement results
To display your most recently measured results for

Check to make sure that the batteries have been properly inserted in the compartment on the bottom of the scales. Make sure that the batteries are facing the right direction with regards to polarity (+/) in the battery compartment. The right polarity is depicted on the inside of the battery compartment. Check to see if the batteries in the scales are empty. A warning symbol will appear on the display screen before the batteries are completely empty. This is also explained in chapter. Maintenance of the scales. Replace all four batteries with new AA/Mignon type batteries.
11.2. The display remote control unit can not be turned on
If you can not turn on the display remote control unit by press the on/off button:
10.2. Replacing the batteries of the display remote control unit
If this symbol appears on the display screen: The batteries of the display remote control unit are almost empty. In this case, replace both batteries with new AAA/Micro type batteries.
Check to make sure that the batteries have been properly inserted in the compartment on the back of the display remote control unit. Make sure that the batteries are facing the right direction with regards to polarity (+/) in the battery compartment. The right polarity is depicted on the inside of the battery compartment.
IB KH5509-10 UK.indb EN15
Check to see if the batteries in the display remote control unit are empty. A warning symbol will appear on the display screen before the batteries are completely empty. This is also explained in chapter. Maintenance of the scales. Replace the batteries with two new AAA/Micro type batteries.
11.4.2. Err If this error message is displayed, then the scales can not measure body fat, muscle mass and body water percentages.
11.3. The display screen is not functioning properly
Measurement will not function properly if you are wearing shoes or socks. Always take your shoes and socks off before standing on the scales. Make sure that you have both feet on the sensors on the top of the scales. If measurement is still not possible:
The scales contain sensitive electronic components. Therefore it is possible that the scales will not function properly if there are radio transmission devices in the immediate vicinity. This could include mobile phones, walkietalkies, CB devices, radio remote control units, other remote control units and microwave devices. If the display screen is not functioning properly, you should remove this type of device from the immediate vicinity of the scales. In most cases it should suffice to switch off the devices while the scales are being used.

Step off the scales and wait until it automatically shuts off. Subsequently turn the scales on again and start the measurement process again. If measurement is still not possible:
Avoid static charge or discharge because this could result in display errors or sudden switching off of the scales.
You should always carry out measurements with clean dry feet. In some rare cases however your feet could be too dry for the measurement functions to function properly. In order to exclude the possibility that this is the cause of the error message: Moisten your feet using a damp cloth. Subsequently carry out the measurement again.
11.4. Error messages appear on the display screen
11.4.1. 0-Ld If this error message is displayed, then the weight on the scales exceeds kg. The scales are not intended for weight exceeding kg.
11.4.3. This error message indicates that the display remote control unit can not establish a connection to the scales. Possible causes for this could be:
The scales are turned off. Turn the scales on by gently touching the top of the scales with your foot. The display remote control unit is too far away from the scales. In this case, move closer to the scales with the display remote control unit.
IB KH5509-10 UK.indb EN16
There is an obstacle between the infrared receiver on the display remote control unit and the scales. In this case, remove the obstacle. The display remote control unit is being held at an angle which hinders connection between the infrared receiver and the scales. In this case, hold the display remote control unit with the infrared receiver facing the scales.
one of the memory locations for personal data will blink on the screen.
Select the memory location of your own personal data by pressing the up or down button. Press the i button when the memory location number corresponding to your personal data is displayed on the screen. Make sure that the displayed data correctly corresponds to your personal data. If the displayed data contains errors, then you have to store your personal data again. The process of storing personal data is explained in chapter. Prior to initial use. If the entered personal data contains no errors:

11.5. Measurement results seem unrealistic
If you doubt the correctness of the displayed measurement results:
Make sure you are carrying out the measurements correctly: Are you carrying out the measurement without clothes on and especially without shoes and socks on? Do you have both feet on the scales sensors? Are your feet dry and clean? Do you remain still on the scales until the measurement results are displayed? If you have carried out the measurements correctly:
Carry out measurements daily over a period of one week. If these measurement return similar results: Compare your measurement results with the average values in the tables in the accompanying informational material. Use the average values to determine whether there are large differences between these values and your own measurement results. If this is the case, please consult your physician to have the measurement results checked.

11.6. Other malfunctions

Please refer to one of our service partners in your area if
Make sure that the stored personal data is correct. If errors were made when making the entries, it could result in false results. To do this: Turn the display remote control unit on by pressing the on/off button. Subsequently press the up or down button once briefly. - appears on the display screen. Subsequently the number of
the malfunctions described in sections. to. can not be rectified as described or other malfunctions occur while using the scales and/or display remote control unit.
You will find the addresses of our service partners on the warranty card. You will find the warranty card with the scales.
IB KH5509-10 UK.indb EN17

09.01.2006 16:12:31 Uhr

12. Cleaning the scales
Clean the scales only using a mild cleanser and a damp cloth. If different people use the scales, then the top of the scales should be cleaned after each usage. You should use a disinfectant with fungicide to prevent the spread of athletes foot. Clean the display remote control unit only using a slightly damp cloth. Please make sure no water or moisture can enter the scales or display remote control unit.
Place the display remote control unit in the holder on the scales. Store the scales in a clean, dry place. Make sure that the scales can not fall from the storage place. Do not place any heavy or sharp objects on the scales. We suggest using the original packaging to store the scales.

Booklet UK.indb 3

06.01.2006 13:33:14 Uhr
dark (possibly strong smelling) urine, a noticeably decreased urge to pass water, a dry mouth, dry lips and skin, nausea or constipation. Body water values that are too low do not necessarily indicate low consumption of fluids. This could also be caused by consuming dehydrating substances (alcohol, drinks containing caffeine such as coffee or black tea and some foods such as asparagus) or medicines. In order to counteract the loss of fluids, adults should consume approximately two liters of fluid, preferably in the form of water, unsweetened fruit juices, fruit or herbal teas. Nonetheless, it would be a mistake to believe that above-average body water levels are harmless or even healthy. The exact opposite is true. High levels of body water can be a sign of serious health problems such as reduced kidney function. Improperly functioning kidneys and resulting reduced urine production with the same amount of fluid consumption can lead to water collecting in the body. Too much water in the bodily tissue places a burden on the heart and results in increased blood pressure. Water collecting in the lungs could even cause life-threatening lung edemas. The importance of body water for individual health can hardly be stressed enough. And that is precisely why you should begin checking your personal body water proportion on a regular basis.
Body fat A curse or a blessing?
For a long time, the total body weight was used to determine whether or not someone was to be considered overweight. However, body weight alone does not indicate whether or not someone is overweight nor is it a good measure of general health. This is due to the fact that our bodies can consist of varying proportions of muscle mass and fat. An example of this: If someone exercises regularly, then we can generally assume that his/her body weight consists of a higher portion of muscle

Booklet UK.indb 4

mass than the body weight of someone who does not exercise. The athletic person could be considerably heavier due to muscle mass and yet healthier than the non-athletic person. A person who loses weight by dieting could actually weigh less in comparison to someone else, and yet still have a higher proportion of body fat and therefore have a poorer general health condition. Diets tend to reduce muscle mass instead of fat. For these reasons, being overweight has increasingly become defined as having excess body fat. The number of syndromes related to high amounts of body fat in our western industrialized world is cause for concern. Body fat levels that are too high are associated with high cholesterol, high blood pressure, heart problems, diabetes and even cancer, as proven by scientific research. The physical impact of being overweight should not be underestimated either. On the other hand, it is important not to forget that body fat also has important functions. Too little fat can result in deficiency of vitamins and minerals stored in the fat, which play important roles in the human organism. In addition to this, body fat contributes considerably to regulating body temperature, as does body water. It is fat which pads the joints and protects internal organs. Excess body fat forms if the energy balance is positive, which means that the quantity of calories consumed is greater than the calories burned. The process of consuming food provides the human body first and foremost with the energy required to carry out the basic vital functions. These include breathing, blood circulation and maintaining the minimum body temperature. Furthermore, food consumption provides the energy required to carry out all daily activities such as walking, talking and athletic training. And finally a part of the energy obtained from food is used for digesting the food itself. The number of calories actually needed to carry out all of the above mentioned functions is far below what is generally assumed to be the case. This is due not least to the largely static activities that make up our daily lives. Furthermore, many people estimate the number of calories burned by indi5

Booklet UK.indb 5

vidual activities as higher than it actually is. These false assumptions along with frequent consumption of foods that are too fatty and lack of exercise are seen in the large numbers of overweight people in our society, which unfortunately also includes children to no small degree. This in turn increases the risk of serious diseases. The key to reducing excess body fat lies in attaining a negative energy balance, which means more calories have to be burned than are consumed. This can be done by eating a balanced and low fat diet, which of course has to be designed to fit individual needs. For example, someone who does a lot of hard physical work will naturally burn a significantly higher number of calories than does someone who primarily works in a sitting position. To achieve long-term success in reducing body fat, a change in diet behavior should always be coupled with increased physical activity. Exercise not only consumes additional energy, but also contributes to developing muscle mass. The role this plays in attaining a negative energy balance is not to be underestimated, because muscles also require more energy even when they are not being used. Measuring body fat and muscle proportions, which has until recently not been possible using normal scales, can help you lead a healthier life. Go ahead and start living healthier today!

Booklet UK.indb 6

Overview
Average distribution of body fat, body water and muscle mass as related to body weight.
Years of age low Proportion Proportion water muscle as % as % very high normal normal

Proportion fat as %

normal

high Men

> 5060 > 60
< 8 < 8 < 8 < 11 < 13 < 15 < 17 < 12 < 15 < 20 < 22 < 24 < 26 < 28

2635 2837

2634 Women 3747
> 24 > 24 > 24 > 26 > 28 > 30 > 34 > 30 > 33 > 36 > 38 > 40 > 42 > 47
> 64 > 63,5 > 62,5 > 61 > 60 > 59 > 58 > 60 > 58,5 > 56 > 53 > 52 > 51 > 50
< 45 < 45 < < 40 < 40 < 36 < 36

Booklet UK.indb 7

06.01.2006 13:33:15 Uhr

Booklet UK.indb 32