KH 150 SE Universal slicer
Operation and Safety Notes
Operation and Safety Notes... Page

5 - 12

Q W E R T
Last information update: 12/2006 BA-Ident-No.: 150SE-122006-1/UK/IE Komperna GmbH Burgstrae 21 D-44867 Bochum

Content

Introduction
Dear Customer.... Intended usage... Items supplied... Features.... Technical data... Page Page Page Page Page 7

Safety

Important safety instructions... Page 7

Before the First Usage

First steps.... Page 8 Setting up the appliance... Page 8 Adjust the infinite slice-thickness setting.. Page 8

Operation

Working advice.... Selecting mode of operation.. Setting the Vario-switch cutting blade speed.. Slice thickness - setting and cutting.. Page Page Page Page 9 9
Cleaning, maintenance and disposal
Cleaning.... Maintenance/Removing/assembling the cutting blade. Special accessories... Disposal.... Page 10 Page 10 Page 11 Page 11

Information

Warranty/Customer Service.. Page 11 Declaration of Conformity/Manufacturer.. Page 12
Introduction Slicer KH 150 SE Introduction Dear Customer,
before using the slicer for the first time please read carefully and thoroughly through these operating instructions and the safety advice, completely familiarising yourself with the appliance. You may find it useful to open out the page illustrating the slicer and describing both it and its operation. Retain these instructions for future reference and pass them on to whoever might acquire the appliance at a future date. 1 Slicer KH 150 SE 1 Cleaning brush 1 Food holder plate 1 Slice tray 1 Screw helper and 2 spare adjustment screws 1 perating instructions with Warranty/Service O information

Features

QBlade protector WVario-switch for blade speed ESwitch for intermittent/continuous operation RKnob for unlocking the blade covering TAppliance housing YBlade cover UCable winder/Cable depot IPower cable OSupporting table with guide slot PFoodstuff carriage {Food holder plate with finger guard }Cutting blade qFood support plate w egulator (Infinite control slice-thickness R controller) (Fig. C) eScrew helper rSpare adjustment screws tSlice/catch tray (Fig. D) yScrew-clip for blade disassembly (Fig. E) uCleaning brush (Fig. F)

Intended usage

This appliance is intended exclusively for slicing normal household foodstuffs. The food to be sliced must be thawed, unpacked and free from bones before it can be sliced with the appliance. All other uses, and modifications to the appliance, are deemed to be improper usage and may result in serious physical injury. The manufacturer accepts no liability for damages that result from improper use of the appliance or are caused by incorrect operation of it. Not for commercial use.

Items supplied

Directly after unpacking the appliance check it to ensure that all components are available and that there are no signs of visible damage.
Introduction/Safety Technical data
Nominal voltage: 230 V ~ 50 Hz Nominal power: 150 W Continuous operation time: COT = 10 Minuten Cutting blade: r einforced, non-rusting serrated blade, 17 cm A fterwards, have the slicer examined by an authorised service centre before you use it again. n the event of damage to the power cable, I the repair may only be carried out by the manufacturer, his service centre or a suitably qualified specialist. To avoid physical injuries: o not use the slicer if your hands are wet or D you are standing on a wet floor. Do not use the slicer if it is wet or moist. The appliance may not be used outdoors. Set up and store the slicer out of reach of children. Do not leave the slicer unattended if it is ready for immediate use. Tips for personal safety: The slicer is intended exclusively for domestic use and not for commercial purposes. lways ensure that the slicer is safely set up A or installed before you take it into use. his appliance should always be used with the T food carriage P and the food holder plate {. Exceptions are possible, if for example the size and shape of the food to be sliced does not permit the use of these devices. Do not use the appliance to cut bones or deep-frozen food. o not use the appliance if it is damaged in any D way. Promptly arrange to have the appliance repaired at an authorised service centre or by an other suitably qualified specialist. se the appliance with the supplied accessories U only. o claims under the warranty nor a liability for N damages will be accepted if they result from improper or incorrect use of the slicer.

m Important safety instructions
avoid potentially fatal electric shocks: To he slicer may only be connected to a 230 V T AC electricity supply. lways remove the plug from the power socket A before you clean the slicer, if it malfunctions and when you have finished using it. To disconnect the appliance from the electricity supply never pull the plug out by using the power cable, always pull directly on the plug itself. ever submerse the appliance in water and N do not expose it to rain or moisture. Should the appliance fall into water, First remove the plug from the socket and then remove the appliance from the water.
Before the First Usage/Operation Before the First Usage First steps
Carefully remove the slicer from its packaging, remove all packaging materials and keep them together with the main packaging. lean the slicer before it comes into contact C with any foodstuffs (see also the chapter Cleaning). lace the catch tray t below the support P table and on the housing such that the sliced foods can fall in there directly and without hindrance after being cut.
Adjust the infinite slice-thickness setting (see Fig. D)
Through variable tightenings of the adjusting screws r you can determine the movement rate of the infinite slice-thickness setting w. crew both of the adjusting screws r tight S with the screwdriver e. heck, by turning the infinite slice-thickness C control knob w, to see if the desired movement rate is suitable. If it is not, - oosen both adjusting screws r for a lighter l movement rate or - ighten both adjusting screws r further for t a stiffer movement rate.

Setting up the appliance

m Specific safety advice on the placing of the appliance 1. ever set the slicer up on a hot surface or N near an open flame. 2. nsure that the power cable does not pass E over hot or sharp-edged objects. 3. o not allow the power cable to become D kinked or trapped and do not wrap it around the slicer. et the slicer up on a flat, non-slip surface S close to a power socket. nwind the required length of power cable I. U Insert the plug into the power socket. Place the food carriage P on the supporting table with guide slot O. Now press the on the blade cover Y high standing side down, so that the holding clamps (on the underside of the food carriage P) engage. Ensure that these have correctly engaged, in that you check the mobility of the food carriage. Pull to the front for removal of the food car riage P from the guide slot O and lift it from the support table. Push the food holder plate { on to the food carriage.

GB/IE

Operation Working advice
mSpecific safety advice for slicing and for the handling of the appliance 1. ever touch the blade when the slicer is in N operation! There is a risk of grave personal injury! 2. lways use the food carriage P and the food A holder plate {. (Exception: very large pieces of foodstuff). ress the pieces of food to be sliced forward P using the food holder {. 3. se the slicer only for cutting normal household U foods and not for other purposes. Do not use
the slicer for cutting deep-frozen foods, bones, foods with large kernels or for the slicing of still packaged foods. 4. ever use the slicer continuously for more N than 10 minutes. 5. he cutting blade } continues to rotate for a T short while after the slicer has been switched off. 6. or reasons of safety, the slice thickness must F be returned to the 0 setting after use. Soft foodstuffs: irect the food carriage P slowly against the D cutter }. Soft foodstuffs, for example hams or cheeses, are best cut when they are at a low temperature/lightly chilled. Hard foodstuffs: With hard foodstuffs you can direct the food carriage P somewhat faster against the cutter }. You can thus quickly prepare your required amount of of sliced foods, for example salami, bread or gherkins. Intermittent operation (switch for intermittent/ continuous operation E in position II): et the switch for intermittent/continuous S operation to position II.The cutting blade will continue to run for as long as the switch for intermittent/continuous operation is held in this position. alting intermittent operation: Release the H switch for intermittent/continuous operation and wait until the cutting blade comes to a complete standstill.
Setting the Vario-switch cutting blade speed
Low revolutions/Revolution symbol narrow end: et a low revolution speed when you want to S cut soft foodstuffs.Push the Vario-switch W completely in the direction of the sharp end. High revolutions/Revolution symbol wide end: se a high revolution speed for slicing hard U foodstuffs. Push the Vario-switch W completely in the direction of the broad end. N ote: Between the maximum and minimum adjustments you can naturally also carry out further individual settings. Practice appropriate trial slicings.
Selecting mode of operation
Note: The two operating modes can be switched on and off with the rocker switch for intermittent/ continuous operation E. C ontinuous operation/max. 10 minutes (switch E in position I): et the switch for intermittent/continuous S operation to position I. The cutting blade runs without it being necessary to hold the switch in this position. alting continuous operation: Move the switch H for intermittent/continuous operation into the 0 position and wait until the cutting blade comes to a complete standstill.

Slice thickness - setting and cutting
Set the required slice thickness using the control knob w (see Figure C). The settings on the scale do not correspond with the slice thickness in mm. For safety reasons the blade is covered in setting 0.
Operation/Cleaning, maintenance and disposal
lace the food to be sliced on the food P carriage P. If necessary, press the food to be sliced with the food holder plate { lightly against the food support q. witch the appliance on and, whilst lightly S pressing the food to be sliced forward, guide it along the cutting blade }. After using the slicer always set the food support plate into the 0 setting so that the sharp blade is covered. The cutting blade } is ideally suitable for cutting wafer-thin slices of cold cuts or boiled ham (see Fig. A). o safeguard your fingers always use the food T carriage P and the food holder plate { (Exception: slicing very large pieces of foodstuffs). could accumulate on the appliance or behind the cutting blade }. lean all appliance parts not suitable for the C dishwasher with a lightly moistened cloth. Wipe off the appliance housing T, the cutting blade covering Y, the support table with guide slots O and the food support plate q carefully. Do not use abrasive cleaning agents, sponges with rough surfaces or hard brushes. Cleaning brush: se the bristles of the cleaning brush u to U remove remnants such as crumbs from all difficult to reach positions. The flattened end can be excellently used to remove stubborn soiling. arry out all tasks using the cleaning brush C with great care. Should it slip close to the cutting blade, there is the risk of receiving a severe personal injury.
Cleaning, maintenance and disposal Cleaning
mImportant safety advice for cleaning the slicer 1. efore starting to clean the slicer; switch it B off, remove the plug from the mains socket and set the food support plate q into the 0 setting. 2. o not submerse the slicer in water. D 3. isk of serious injury: The cutting blade } R is very sharp!
Maintenance/Removing/assembling the cutting blade
mImportant safety notices for the removal and assembly of the cutting blade! 1. witch the slicer off, remove the plug from the S power socket and set the food support plate q into position 0. 2. Risk of personal injury! The cutting blade is very sharp! For the removal and assembly wear appropriate safety gloves. Otherwise, you could receive cut injuries. pen the blade cover Y by pressing the O blade cover unlock button R. Remove the blade cover Y. emove the plastic screw clip y from the R mounting and screw the blade lock of the cutting blade } out by unscrewing it to the left. hen taking out the blade } make sure that W you grasp it at its centre.
Accessories suitable for dishwashers! lean the food carriage P, the food holder { C and the catch-tray t in the dishwasher. t is necessary to clean the slicer thoroughly I at regular intervals as perishable food scraps

10 GB/IE

Cleaning, maintenance and disposal/Information
he cutting blade } can be cleaned in the T dishwasher. lean the housing behind the blade with a dry C cloth or a soft brush. e-assemble the cutting blade in a reverse R sequence of the above instructions. ue to the special sawtoothing and the high D quality, the cutting blade will retain its sharpness for a very long time. A resharpening of the cutting blade is not necessary. Consult the service centre for your country if you have questions about the cutting blade. To dispose of electrical appliances that you no longer require, please consult your local authorities or city administration.
Information Warranty/Customer Service
With this appliance you receive a warranty of 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the case of a warranty claim, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured. This warranty is valid for the original purchaser only, it is not transferable. The warranty provisions are valid only for material and fabrication defects, they are not valid for wearing parts or wilful damages. The appliance is intended solely for private, not commercial, use. If this product has been subjected to improper or inappropriate handling, abuse, or modifications not carried out by one of our authorised service centres, the warranty will be considered void. Your statutory rights are not restricted in any way by this warranty.

Special accessories

R ound cutter: An untoothed cutting blade, specifically for the finest of slices, is also available. Orders for special accessories are be directed to the service centre for your country.

Disposal

he packaging is made of 100% enT vironment-friendly material, which can be disposed off at the local recycling centres.
not dispose of electrical appliDo ances with normal household waste. According to the European Directive 2002/96/EG regarding used electrcial and electronic appliances and its implementation in national law, used electrical equipment must be separately collected and disposed of at an approved recycling facility.
GB DES Ltd Units 14-15 Bilston Industrial Estate Oxford Street Bilston WV14 7EG Tel.: 0870/787-6177 Fax: 0870/787-6168 e-mail: support.uk@kompernass.com IE Kompernass Service Ireland c/o Irish Connection 41 Harbour View Howth, Co. Dublin Tel 087-077 Fax: 18398056 e-mail: support.ie@kompernass.com EMC (Electromagentic Compatibility) (89/336/EEC, 93/68/EEC): EMC: EN55015-1, EN55014-2 and confirm this with the CE mark. Type/Machine Designation: Slicer Bifinett KH 150 SE Bochum, 31.12.2006

Declaration of Conformity/ Manufacturer
We, Komperna GmbH, Burgstr. 21, D-44867 Bochum, Germany, declare that this product complies with the following EU directives: Low Voltage Directive (73/23/EEC, 93/68/EEC): GS: EN60335-1: 1994+A1+A2+A11-A16, EN60335-2-14: 1996+A11+A1+A2
Hans Komperna - Managing Director-

Food Slicer

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

KH 150 SE

FOOD SLICER
Komperna GmbH Burgstrae Bochum (Germany)

GB/IE/CY

Operation and Safety Notes
Last Information Update: 11/2007 Ident.-No.: KH 150 SE112007-6

Table of content

Introduction
Dear Customer.... Page Intended usage.... Page Items supplied... Page Features..... Page Technical data... Page 7

Safety

Important safety instructions... Page 7.

Before the First Usage

First steps.... Page 8 Setting up the appliance... Page 8 A djust the infinite slice-thickness setting... Page 8

Operation

Working advice.... Page Selecting mode of operation... Page. Setting the Vario-switch cutting blade speed... Page Slice thickness - setting and cutting... Page 9 9
Cleaning, maintenance and disposal
Cleaning.... Page Maintenance/Removing/assembling the cutting blade.. Page Special accessories.... Page Disposal..... Page 10 11

Information

Warranty/Customer Service... Page 11. Declaration of Conformity/Manufacturer... Page 12
The following icons/symbols are used in this instruction manual: Read instruction manual!

Watts (Effective power)

Observe caution and safety notes!
Keep children and other unauthorised personnel at a safe distance when using electrical tools. Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock. Damaged appliances, power cables and power plugs mean potentially fatal risks from electric shock. Regularly check the condition of the appliance, the power cables and the power plugs. Dispose packaging and appliance in an environmentally-friendly way!
Cautionelectric shock! Dangerous electric currentdanger to life!
Proper procedure and handling.

Voltage

Slicer KH 150 SE
use of the appliance or are caused by incorrect operation of it. Not for commercial use.

Dear Customer,

before using the slicer for the first time please read carefully and thoroughly through these operating instructions and the safety advice, completely familiarising yourself with the appliance. You may find it useful to open out the page illustrating the slicer and describing both it and its operation. Retain these instructions for future reference and pass them on to whoever might acquire the appliance at a future date.

Items supplied

Directly after unpacking the appliance check it to ensure that all components are available and that there are no signs of visible damage. 1 Slicer KH 150 SE 1 Cleaning brush 1 Food holder plate 1 Slice tray 1 Screw helper and 2 spare adjustment screws 1 Operating instructions with Warranty/Service information

Intended usage

This appliance is intended exclusively for slicing normal household foodstuffs. The food to be sliced must be thawed, unpacked and free from bones before it can be sliced with the appliance. All other uses, and modifications to the appliance, are deemed to be improper usage and may result in serious physical injury. The manufacturer accepts no liability for damages that result from improper

6 GB/IE/CY

Features
Blade protector Vario-switch for blade speed Switch for intermittent/continuous operation Knob for unlocking the blade covering Appliance housing Blade cover Cable winder/Cable depot

Introduction/Safety

8 Power cable 9 Supporting table with guide slot 10 Foodstuff carriage 11 Food holder plate with finger guard 12 Cutting blade 13 Food support plate 14 egulator (Infinite control slice-thickness R

controller) (Fig. C)

15 Screw helper 16 Spare adjustment screws 17 Slice/catch tray (Fig. D) 18 Screw-clip for blade disassembly (Fig. E) 19 Cleaning brush (Fig. F)

Technical data

Nominal voltage: 230V~50Hz Nominal power: 150W Continuous operation time: COT = 10 Minuten Cutting blade: reinforced, non-rusting serrated blade, 17cm
Always remove the plug from the power socket before you clean the slicer, if it malfunctions and when have finished using it. To disconnect the you appliance from the electricity supply never pull the plug out by using the power cable, always pull directly on the plug itself. J Never submerse the appliance in water and do not expose it to rain or moisture. Should the appliance fall into water, First remove the plug from the socket and then remove the appliance from the water. Afterwards, have the slicer examined by an authorised service centre before you use it again. J the event of damage to the power cable, the In repair may only be carried out by the manufacturer, his service centre or a suitably qualified specialist. To avoid physical injuries: not use the slicer if your hands Do are wet or you are standing on a wet floor. Do not use the slicer if it is or moist. The appliance may not be used wet outdoors. J up and store the slicer out of Set reach of children. J not leave the slicer unattended if it is ready Do for immediate use. Tips for personal safety J

Safety I mportant safety instructions
avoid potentially fatal To electric shocks:
J slicer may only be connected to a 230V The AC electricity supply.
J slicer is intended exclusively for domestic The use and not for commercial purposes. J Always ensure that the slicer is safely set up or installed before you take it into use. J appliance should always be used with the This food carriage 10 and the food holder plate 11. Exceptions are possible, if for example the size and shape of the food to be sliced does not permit the use of these devices. Do not use the appliance to cut bones or deep-frozen food. J not use the appliance if it is damaged in Do any way. Promptly arrange to have the appliGB/IE/CY 7
Safety/Before the First Usage/Operation
ance repaired at an authorised service centre or by an other suitably qualified specialist. J the appliance with the supplied accessoUse ries only. claims under the warranty nor a liability for No damages will be accepted if they result from improper or incorrect use of the slicer.
j Push the food holder plate 11 on to the food carriage. j Place the catch tray 17 below the support table and on the housing such that the sliced foods can fall in there directly and without hindrance after being cut.

Q Adjust

Before the First Usage First steps
the infinite slice-thickness setting (see Fig. D)
j Carefully remove the slicer from its packaging, remove all packaging materials and keep them together with the main packaging. j Clean the slicer before it comes into contact with any foodstuffs (see also the chapter Cleaning).
Through variable tightenings of the adjusting screws 16 you can determine the movement rate of the infinite slice-thickness setting 14. j Screw both of the adjusting screws 16 tight with the screwdriver 15. j Check, by turning the infinite slice-thickness control knob 14 , to see if the desired movement rate is suitable. If it is not, - oosen both adjusting screws 16 for a lighter l movement rate or - ighten both adjusting screws 16 further for a t stiffer movement rate.

Setting up the appliance

pecific safety advice on the S placing of the appliance
1. Never set the slicer up on a hot surface or near an open flame. 2. Ensure that the power cable does not pass over hot or sharp-edged objects. 3. not allow the power cable to become kinked Do or trapped and do not wrap it around the slicer. j the slicer up on a flat, non-slip surface Set close to a power socket. j Unwind the required length of power cable 8. Insert the plug into the power socket. j Place the food carriage 10 on the supporting table with guide slot 9. Now press the on the blade cover 6 high standing side down, so that the holding clamps (on the underside of the food carriage 10 ) engage. Ensure that these have correctly engaged, in that you check the mobility of the food carriage. to the front for removal of the food Pull carriage 10 from the guide slot 9 and lift it from the support table.

8 GB/IE/CY

Operation Working advice
S pecific safety advice for slicing and for the handling of the appliance
Never touch the blade when the slicer is in 1. operation! There is a risk of grave personal injury! 2. Always use the food carriage 10 and the food holder plate 11. (Exception: very large pieces of foodstuff). Press the pieces of food to be sliced forward using the food holder 11. 3. the slicer only for cutting normal houseUse hold foods and not for other purposes. Do not use the slicer for cutting deep-frozen foods, bones, foods with large kernels or for the slicing of still packaged foods.
4. Never use the slicer continuously for more than 10 minutes. 5. cutting blade 12 continues to rotate for a The short while after the slicer has been switched off. 6. reasons of safety, the slice thickness must For be returned to the 0 setting after use. Soft foodstuffs: j Direct the food carriage 10 slowly against the cutter 12. Soft foodstuffs, for example hams or cheeses, are best cut when they are at a low temperature/lightly chilled. Hard foodstuffs: j With hard foodstuffs you can direct the food carriage 10 somewhat faster against the cutter 12. You can thus quickly prepare your required amount of of sliced foods, for example salami, bread or gherkins.
Halting intermittent operation: Release the switch for intermittent/continuous operation and wait until the cutting blade comes to a complete standstill.

Q Setting

the Vario-switch cutting blade speed
Low revolutions/Revolution symbol narrow end: j a low revolution speed when you want to Set cut soft foodstuffs.Push the Vario-switch 2 completely in the direction of the sharp end. High revolutions/Revolution symbol wide end: j a high revolution speed for slicing hard Use foodstuffs. Push the Vario-switch 2 completely in the direction of the broad end. Note: Between the maximum and minimum adjustments you can naturally also carry out further individual settings. Practice appropriate trial slicings.

Q Slice

Selecting mode of operation
Note: The two operating modes can be switched on and off with the rocker switch for intermittent/ continuous operation 3. Continuous operation/max. 10 minutes (switch 3 in position I): j the switch for intermittent/continuous Set operation to position I. The cutting blade runs without it being necessary to hold the switch in this position. Halting continuous operation: Move the switch for intermittent/continuous operation into the 0 position and wait until the cutting blade comes to a complete standstill. Intermittent operation (switch for intermittent/continuous operation 3 in position II): j the switch for intermittent/continuous Set operation to position II.The cutting blade will continue to run for as long as the switch for intermittent/continuous operation is held in this position.

thickness - setting and cutting
Set the required slice thickness using the control knob 14 (see Figure C). The settings on the scale do not correspond with the slice thickness in mm. For safety reasons the blade is covered in setting 0. j Place the food to be sliced on the food carriage 10. If necessary, press the food to be sliced with the food holder plate 11 lightly against the food support 13. j Switch the appliance on and, whilst lightly pressing the food to be sliced forward, guide it along the cutting blade 12. After using the slicer always set the food support plate into the 0 setting so that the sharp blade is covered. The cutting blade 12 is ideally suitable for cutting wafer-thin slices of cold cuts or boiled ham (see Fig. A).

GB/IE/CY 9

Operation/Cleaning, maintenance and disposal
j safeguard your fingers always use the food To carriage 10 and the food holder plate 11 (Exception: slicing very large pieces of foodstuffs).
Q Cleaning, Q Maintenance/Removing/
assembling the cutting blade
I mportant safety notices for the removal and assembly of the cutting blade!
maintenance and disposal Cleaning
mportant safety advice for I cleaning the slicer
1. Switch the slicer off, remove the plug from the power socket and set the food support plate 13 into position 0. 2. Attention! Risk of personal m injury! The cutting blade is very sharp! For the removal and assembly wear appropriate safety gloves. Otherwise, you could receive cut injuries. j Open the blade cover 6 by pressing the blade cover unlock button 4. Remove the blade cover 6. j Remove the plastic screw clip 18 from the mounting and screw the blade lock of the cutting blade 12 out by unscrewing it to the left. j When taking out the blade 12 make sure that you grasp it at its centre. j cutting blade 12 can be cleaned in the The dishwasher. j Clean the housing behind the blade with a dry cloth or a soft brush. j Re-assemble the cutting blade in a reverse sequence of the above instructions. j Due to the special sawtoothing and the high quality, the cutting blade will retain its sharpness for a very long time. A resharpening of the cutting blade is not necessary. Consult the service centre for your country if you have questions about the cutting blade.
1. Before starting to clean the slicer; switch it off, remove the plug from the mains socket and set the food support plate 13 into the 0 setting. 2. not submerse the slicer in water. Do 3. Attention! Risk of serious m injury: The cutting blade 12 is very sharp! Accessories suitable dishwashers! for j Clean the food carriage 10 , the food holder 11 and the catch-tray 17 in the dishwasher. j is necessary to clean the slicer thoroughly at It regular intervals as perishable food scraps could accumulate on the appliance or behind the cutting blade 12. j Clean all appliance parts not suitable for the dishwasher with a lightly moistened cloth. Wipe off the appliance housing 5 , the cutting blade covering 6 , the support table with guide slots 9 and the food support plate 13 carefully. Do not use abrasive cleaning agents, sponges with rough surfaces or hard brushes. Cleaning brush: j the bristles of the cleaning brush 19 to reUse move remnants such as crumbs from all difficult to reach positions. The flattened end can be excellently used to remove stubborn soiling. j Carry out all tasks using the cleaning brush with great care. Should it slip close to the cutting blade, there is the risk of receiving a severe personal injury.

10 GB/IE/CY

Special accessories
Round cutter: An untoothed cutting blade, specifically for the finest of slices, is also available. Orders for special accessories are be directed to the service centre for your country.
Cleaning, maintenance and disposal/Information

Disposal

packaging is wholly composed of The environmentally-friendly materials that can be disposed of at a local recycling
GB DES Ltd Units 14-15 Bilston Industrial Estate Oxford Street Bilston (Great Britain) WV14 7EG Tel.: 0870/787-6177 Fax: 0870/787-6168 e-mail: support.uk@kompernass.com IE Kompernass Service Ireland c/o Irish Connection 41 Harbour View Howth, Co. Dublin (Ireland) Tel 087-077 Fax: 18398056 e-mail: support.ie@kompernass.com
centre. o not dispose of electric equipD ment in the household waste! According to the European Directive 2002/96/EG regarding used electrcial and electronic appliances and its implementation in national law, used electrical equipment must be separately collected and disposed of at an approved recycling facility. To dispose of electrical appliances that you no longer require, please consult your local authorities or city administration.
Information Warranty/Customer Service
With this appliance you receive a warranty of 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the case of a warranty claim, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured. This warranty is valid for the original purchaser only, it is not transferable. The warranty provisions are valid only for material and fabrication defects, they are not valid for wearing parts or wilful damages. The appliance is intended solely for private, not commercial, use. If this product has been subjected to improper or inappropriate handling, abuse, or modifications not carried out by one of our authorised service centres, the warranty will be considered void. Your statutory rights are not restricted in any way by this warranty.

GB/IE/CY 11

Q Declaration
of Conformity/ Manufacturer
We, Komperna GmbH, Burgstr. 21, 44867 Bochum, Germany, declare that this product complies with the following EU directives: Low Voltage Directive 2006/95/EC GS: EN60335-1: 1994+A1+A2+A11-A16, EN60335-2-14: 1996+A11+A1+A2 Electromagentic Compatibility 2004/108/EC EMC: EN55015-1, EN55014-2 and confirm this with the CE mark. Type/Machine Designation: Slicer Bifinett KH 150 SE Bochum, 30.11.2007
Hans Komperna - Managing Director-

We reserve the right to make technical modifications in the course of further development. 12 GB/IE/CY