CV_KH4008_BN25974_LB4.qxd

12.02.2009

13:11 Uhr

Seite 1

LASER SPIRIT LEVEL
KH 4008 LASER SPIRIT LEVEL Operating instructions POZIOMNICA LASEROWA Instrukcja obsugi LZERES VZMRTK Hasznlati utasts LASERSKA VODNA TEHTNICA Navodila za uporabo LASEROV VODOVHA Nvod k obsluze LASEROV VODOVHA Nvod na obsluhu LASERSKA LIBELA Upute za upotrebu LASER-WASSERWAAGE Bedienungsanleitung
KOMPERNASS GMBH BURGSTRASSE 21 D-44867 BOCHUM www.kompernass.com ID-Nr.: KH4008-01/09-V1

13:12 Uhr

Seite 4

l r t y u i o a

k j h g f

IB_KH4008_BN25974_LB4

11:41 Uhr

CONTENT

Safety information Intended use Items supplied Appliance description Commissioning
Inserting the batteries.3 Laser Spirit Level.3 Tripod.3 Adjustment.4

Operation

Normal operation (Fig. 1).Angle option (Fig. 2).4 Line projection (Fig. 3).4
Cleaning and Care Storage Technical Data Disposal Importer Warranty & Service
Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Pass the manual on to whomsoever might acquire the scale at a later date.

Seite 2

LASER SPIRIT LEVEL KH 4008

Safety information

Risk of personal injury!
This appliance is not intended for use by persons (including children) with reduced physical, sensorial or mental cabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Beware of appliance damage!
NEVER subject the appliance to rain. Do not use the appliance in wet or moist environments. Do NOT use the appliance at locations that have a risk of fire or explosion, e.g. close to flammable fluids or gases. All adjustments intended to increase the laser power are forbidden. To avoid damage to the appliance, arrange for repairs to be carried out only by our Customer Services Department or qualified specialists. Regularly check the condition of the batteries. Leaking battery acid can cause damage to the Laser Spirit Level. Remove the batteries if you do not intend to use the Laser Spirit Level for an extended period. Always change all batteries at the same time and always use batteries of the same type. Clean the battery compartment with a dry cloth. No liabilty is accepted by the manufacturer for damage resulting from improper manipulation of the laser and the fine adjustment devices as well as for damages resulting from non-compliance with the safety information.
This appliance contains a Class 2 laser. NEVER direct the laser beam at people or animals. NEVER look directly into the laser. The laser can cause serious eye damage. Do NOT direct the laser beam at strongly reflective materials. Reflected laser beams are also dangerous. In the event of the batteries leaking acids, wear protective gloves. There is a risk of receiving chemical burns! Never open, solder or weld batteries. Do not throw batteries into a fire. Do not recharge batteries.There is a risk of explosion and injury!

Intended use

The appliance is intended for use in the alignment, levelling and angle-marking of domestic building modifications. The appliance is intended for domestic use only. It is not intended for commercial use.

Seite 3

Items supplied
Laser Spirit Level 40 cm Laser-line attachment Laser 90 angling attachment Tripod, height-adjustable from 43-120 cm Levelling plate 2 x 1,5 V Type AAA / LR03 / Micro Transport case Operating instructions

Commissioning

Inserting the batteries
Unscrew the battery compartment cover e by turning the knurled screw of the Laser Spirit Level to the left. Insert two batteries of type AAA / LR03 / Micro as marked in the battery compartment of the Laser Spirit Level. Close and firmly secure the battery compartment cover e.

Appliance description

Laser Spirit Level q Laser Spirit Level w Spirit level e Battery compartment cover with ON/OFF switch r Laser optic t Adjustment spirit level (Levelling plate) y 360 Angle scale u Adjustment screw ( Levelling plate) i Levelling plate o Crank a Fixing screw s Securing ring d Locking lever f Levelling spirit level g Tripod h Centre column with crank adjustment j Mounting base k Securing clamp l Spirit level for angle measurement ; Laser 90 deflection attachment 2) Laser-line attachment 2! Securing screw (Levelling plate)

Switch-on: Turn the ON/OFF switch engages at the rear. Switch-off: Turn the ON/OFF switch engages at the front. until it until it

Tripod

Open the tripod g so wide that the securing ring s touches the rubber ring at the end of the column. Turn the securing ring s clockwise until it is tight. Loosen the locking lever d, release the legs of the tripod g and extend them to the desired length. To neutralise the condition of the surface on which it stands, the tripod g can be exactly aligned with the help of the integrated spirit level f and by adjusting the length of the legs.

Notice:

The water bubble must be located in the middle of the circular marking. Secure the legs of the tripod with the locking lever d. Screw the levelling plate i onto the thread of the central column h of the tripod g.

Adjustment

Bring the levelling plate i into a horizontal position by turning the adjustment screws u and use of the adjustment spirit level t.

Caution!

This appliance contains a Class 2 laser. NEVER direct the laser beam at people or animals. NEVER look directly into the laser. The laser can cause serious eye damage.
The water bubble of the spirit level t must be located between the two markings. Place the Laser Spirit Level in the mounting base j and fix it firmly with the securing clamp k. If need be, correct the adjustment. Loosen the securing screw 2!, then swivel the levelling plate i complete with the Laser Spirit Level through 90 y, by means of the 360 angle scale. Readjust the horizontal by turning the adjustment screws u and with use of the adjustment spirit level t. A readjustment may be necessary after the return swivel.
Normal operation (Fig. 1)
This measuring method is suitable for indicating measuring points. Switch on the laser of the beforehand adjusted Laser Spirit Level by turning the ON/OFF switch. Using the point laser, mark the distant measuring point. With the 360 rotatable levelling plate i an all-round marking is possible at the same time.

90 Angle option (Fig. 2)

The water bubble of the spirit level w must also be located between the two markings. On the competion of successful adjustment, the laser beam is always at the same height when the Laser Spirit Level is swivelled by means of the 360 angle scale y. Height adjustment is accomplished by turning the crank o on the tripod.
This measuring method is suitable for the marking of vertical lines. Insert the laser 90 deflection attachment ; into the laser optic r of the beforehand adjusted Laser Spirit Level. The exactly by 90 deflected point laser produces a vertical reference level to the laser beam.

Line projection (Fig. 3)

This measuring method is especially helpful with for example the hanging of pictures. Insert the laser line attachment 2) into the laser optic r of the beforehand adjusted Laser Spirit Level. A line is then projected on to the wall, with which previously determined point-markings can be connected.

Caution:

Due to a broader spread there is a reduction in the brightness of the laser beam.

Seite 5

Cleaning and Care
Under no circumstance may the Laser Spirit Level be submersed in water or other liquids. Do not use aggressive detergents or solvents. These could cause damage to the appliance, especially to the lettering. Clean all components of the appliance with a moist cloth. Clean the laser optic r with a soft brush.

Disposal

Do not dispose of the appliance in your normal domestic waste. This product is subject to the European guideline 2002/96/EC. Dispose of the appliance through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.

Battery disposal!

Storage
Always store the appliance components in the transport case. If the appliance is not intended to be used for an extended period, remove the batteries from the battery compartment and store them separately.
Batteries may not be disposed of with normal domestic waste. All consumers are statutorily obliged to dispose of batteries at the collection point in their community/district or with the original supplier. The purpose of this obligation is to ensure that batteries can be disposed of in an environmentally friendly manner. Only dispose of batteries when they are fully discharged. Dispose of all packaging materials in an environmentally responsible manner.

Technical Data

Power supply: Laser class: Max. output (P max): Wave length:(): EN 60825 - 1:2007 Tripod: 2 x 1,5 V Type AAA / LR03 / Micro 2 1mW 650 nm Height adjustable over 43-120 cm

Importer

KOMPERNASS GMBH BURGSTRASSE BOCHUM, GERMANY www.kompernass.com

Seite 6

Warranty & Service
The warranty for this appliance is for 3 years from the date of purchase. This appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase date. Should a claim need to be made under the warranty, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured. The warranty covers ONLY claims for material and maufacturing defects, not for wearing or consumable or for damage to fragile components. This product is for private use only and is not intended for commercial applications. The warranty will become void in the event of abusive and improper handling, use of force and internal tampering not carried or approved by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. DES Ltd Units 14-15 Bilston Industrial Estate Oxford Street Bilston WV14 7EG Tel.: 0870/787-6177 Fax: 0870/787-6168 e-mail: support.uk@kompernass.com Kompernass Service Ireland Tel: 412 (0,082 EUR/Min.)

CV_KH4008_BN25974_LB3

12.02.2009

12:40 Uhr

Seite 1

LASER SPIRIT LEVEL

KH 4008

LASER SPIRIT LEVEL Operating instructions LASERVESIVAAKA Kyttohje LASERVATTENPASS Bruksanvisning LASERVATERPAS Betjeningsvejledning AAI-EZEP LASER-WASSERWAAGE Bedienungsanleitung KOMPERNASS GMBH BURGSTRASSE 21 D-44867 BOCHUM www.kompernass.com ID-Nr.: KH4008-01/09-V1

12:41 Uhr

Seite 4

l r t y u i o a

k j h g f

IB_KH4008_BN25974_LB3

11:08 Uhr

CONTENT

Safety information Intended use Items supplied Appliance description Commissioning
Inserting the batteries....3 Laser Spirit Level....3 Tripod.....3 Adjustment.....4

Operation

Normal operation (Fig. 1)....Angle option (Fig. 2)....4 Line projection (Fig. 3)....4
Cleaning and Care Storage Technical Data Disposal Importer Warranty & Service
Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Pass the manual on to whomsoever might acquire the scale at a later date.

Seite 2

LASER SPIRIT LEVEL KH 4008

Safety information

Risk of personal injury!
This appliance is not intended for use by persons (including children) with reduced physical, sensorial or mental cabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Beware of appliance damage!
NEVER subject the appliance to rain. Do not use the appliance in wet or moist environments. Do NOT use the appliance at locations that have a risk of fire or explosion, e.g. close to flammable fluids or gases. All adjustments intended to increase the laser power are forbidden. To avoid damage to the appliance, arrange for repairs to be carried out only by our Customer Services Department or qualified specialists. Regularly check the condition of the batteries. Leaking battery acid can cause damage to the Laser Spirit Level. Remove the batteries if you do not intend to use the Laser Spirit Level for an extended period. Always change all batteries at the same time and always use batteries of the same type. Clean the battery compartment with a dry cloth. No liabilty is accepted by the manufacturer for damage resulting from improper manipulation of the laser and the fine adjustment devices as well as for damages resulting from non-compliance with the safety information.
This appliance contains a Class 2 laser. NEVER direct the laser beam at people or animals. NEVER look directly into the laser. The laser can cause serious eye damage. Do NOT direct the laser beam at strongly reflective materials. Reflected laser beams are also dangerous. In the event of the batteries leaking acids, wear protective gloves. There is a risk of receiving chemical burns! Never open, solder or weld batteries. Do not throw batteries into a fire. Do not recharge batteries.There is a risk of explosion and injury!

Intended use

The appliance is intended for use in the alignment, levelling and angle-marking of domestic building modifications. The appliance is intended for domestic use only. It is not intended for commercial use.

Seite 3

Items supplied
Laser Spirit Level 40 cm Laser-line attachment Laser 90 angling attachment Tripod, height-adjustable from 43-120 cm Levelling plate 2 x 1,5 V Type AAA / LR03 / Micro Transport case Operating instructions

Commissioning

Inserting the batteries
Unscrew the battery compartment cover e by turning the knurled screw of the Laser Spirit Level to the left. Insert two batteries of type AAA / LR03 / Micro as marked in the battery compartment of the Laser Spirit Level. Close and firmly secure the battery compartment cover e.

Appliance description

Laser Spirit Level q Laser Spirit Level w Spirit level e Battery compartment cover with ON/OFF switch r Laser optic t Adjustment spirit level (Levelling plate) y 360 Angle scale u Adjustment screw ( Levelling plate) i Levelling plate o Crank a Fixing screw s Securing ring d Locking lever f Levelling spirit level g Tripod h Centre column with crank adjustment j Mounting base k Securing clamp l Spirit level for angle measurement ; Laser 90 deflection attachment 2) Laser-line attachment 2! Securing screw (Levelling plate)
Switch-on: Turn the ON/OFF switch engages at the rear. Switch-off: Turn the ON/OFF switch engages at the front. until it until it

Tripod

Open the tripod g so wide that the securing ring s touches the rubber ring at the end of the column. Turn the securing ring s clockwise until it is tight. Loosen the locking lever d, release the legs of the tripod g and extend them to the desired length. To neutralise the condition of the surface on which it stands, the tripod g can be exactly aligned with the help of the integrated spirit level f and by adjusting the length of the legs.

Notice:

The water bubble must be located in the middle of the circular marking. Secure the legs of the tripod with the locking lever d. Screw the levelling plate i onto the thread of the central column h of the tripod g.

Adjustment

Bring the levelling plate i into a horizontal position by turning the adjustment screws u and use of the adjustment spirit level t.

Caution!

This appliance contains a Class 2 laser. NEVER direct the laser beam at people or animals. NEVER look directly into the laser. The laser can cause serious eye damage.
The water bubble of the spirit level t must be located between the two markings. Place the Laser Spirit Level in the mounting base j and fix it firmly with the securing clamp k. If need be, correct the adjustment. Loosen the securing screw 2!, then swivel the levelling plate i complete with the Laser Spirit Level through 90 y, by means of the 360 angle scale. Readjust the horizontal by turning the adjustment screws u and with use of the adjustment spirit level t. A readjustment may be necessary after the return swivel.
Normal operation (Fig. 1)
This measuring method is suitable for indicating measuring points. Switch on the laser of the beforehand adjusted Laser Spirit Level by turning the ON/OFF switch. Using the point laser, mark the distant measuring point. With the 360 rotatable levelling plate i an all-round marking is possible at the same time.

90 Angle option (Fig. 2)

The water bubble of the spirit level w must also be located between the two markings. On the competion of successful adjustment, the laser beam is always at the same height when the Laser Spirit Level is swivelled by means of the 360 angle scale y. Height adjustment is accomplished by turning the crank o on the tripod.
This measuring method is suitable for the marking of vertical lines. Insert the laser 90 deflection attachment ; into the laser optic r of the beforehand adjusted Laser Spirit Level. The exactly by 90 deflected point laser produces a vertical reference level to the laser beam.

Line projection (Fig. 3)

This measuring method is especially helpful with for example the hanging of pictures. Insert the laser line attachment 2) into the laser optic r of the beforehand adjusted Laser Spirit Level. A line is then projected on to the wall, with which previously determined point-markings can be connected.

Caution:

Due to a broader spread there is a reduction in the brightness of the laser beam.

Seite 5

Cleaning and Care
Under no circumstance may the Laser Spirit Level be submersed in water or other liquids. Do not use aggressive detergents or solvents. These could cause damage to the appliance, especially to the lettering. Clean all components of the appliance with a moist cloth. Clean the laser optic r with a soft brush.

Disposal

Do not dispose of the appliance in your normal domestic waste. This product is subject to the European guideline 2002/96/EC. Dispose of the appliance through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.

Battery disposal!

Storage
Always store the appliance components in the transport case. If the appliance is not intended to be used for an extended period, remove the batteries from the battery compartment and store them separately.
Batteries may not be disposed of with normal domestic waste. All consumers are statutorily obliged to dispose of batteries at the collection point in their community/district or with the original supplier. The purpose of this obligation is to ensure that batteries can be disposed of in an environmentally friendly manner. Only dispose of batteries when they are fully discharged. Dispose of all packaging materials in an environmentally responsible manner.

Technical Data

Power supply: Laser class: Max. output (P max): Wave length:(): EN 60825 - 1:2007 Tripod: 2 x 1,5 V Type AAA / LR03 / Micro 2 1mW 650 nm Height adjustable over 43-120 cm

Importer

KOMPERNASS GMBH BURGSTRASSE BOCHUM, GERMANY www.kompernass.com

Seite 6

Warranty & Service
The warranty for this appliance is for 3 years from the date of purchase. This appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase date. Should a claim need to be made under the warranty, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured. The warranty covers ONLY claims for material and maufacturing defects, not for wearing or consumable or for damage to fragile components. This product is for private use only and is not intended for commercial applications. The warranty will become void in the event of abusive and improper handling, use of force and internal tampering not carried or approved by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. DES Ltd Units 14-15 Bilston Industrial Estate Oxford Street Bilston WV14 7EG Tel.: 0870/787-6177 Fax: 0870/787-6168 e-mail: support.uk@kompernass.com Kompernass Service Ireland Tel: 412 (0,082 EUR/Min.)