CV_KH4412_E26060_LB6.qxd

07.01.2009

14:58 Uhr

Seite 2

LAMINATOR

KH 4412
LAMINATOR Operating instructions

Seite 4

IB_KH4412_E26060_LB6

03.02.2009

13:34 Uhr

Seite 1

CONTENT
1. Intended use 2. Items supplied 3. Appliance description 4. Technical data 5. Safety instructions 6. Suitable laminating pouches 7. Operating levels 8. Preparing for hot lamination 9. Preparing for cold lamination 10. Lamination process 11. Anti-Blocking Function (ABS) 12. Cleaning and care 13. Storage 14. Disposal 15. Warranty & Service 16. Importer
Read these operating instructions carefully before using the appliance for the first time and preserve this maual for later reference. Pass this manual on to whoever might acquire the appliance at a future date.

LAMINATOR KH 4412

1. Intended use
The laminator is intended exclusively for use in private households, for the hot and cold lamination of documents made from paper or cardboard. It is NOT intended for use with any other materials. It is also NOT intended for commercial or industrial applications. No warranty is provided for damages resulting from improper use of the appliance!

4. Technical data

Power supply: Power consumption: Power consumption: Laminating speed:

Foil size

220 - 240 V~ 50 Hz 1,4 A 300 W

80 Micron

125 Micron
approx. 45 Sec. approx. 35 Sec.
approx. 55 Sec. approx. 40 Sec.

2. Items supplied

1x Laminator Lervia KH 4412 10x Laminating pouches DIN A4 for hot laminating (80 micron) 10x Laminating pouches DIN A5 for hot laminating (80 micron) 10x Laminating pouches for hot lamination of business (80 micron) 1 x Operating Instructions
Lamination thickness: Foil width: Pouch thickness: Hot lamination: Cold lamination: Protection class:
max. 1 mm (cold lamination) Max. 230 mm max. 125 Micron max. 200 Micron II

5. Safety instructions

This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance. Unplug the power cable after every use and before cleaning, so as to prevent the appliance from being switched on inadvertently. Check the appliance and all components for visible damages. The safety concept can only work if the appliance is in a fault-free condition. Never perform hot lamination on flammable, heat-sensitive and/or meltable materials and do not laminate drawings on temperature-sensitive paper or material that will undergo changes in colour or quality when subjected to heat.

3. Appliance description

q Pouch guide (rear) w Pouch format restraint e ON / OFF switch r Selector switch for hot and cold lamination
(HOT and COLD) t ON / OFF Indicator lamp y Indicator lamp "Ready" u Pouch ejector slot (front) i Anti-Blocking switch and pouch thickness switch o Slot for manual pouch input

Seite 3

Never laminate valuable or unique documents. Although the laminator satisfies all predominant safety norms and standards, errors can never be completely discounted - as with all electrical appliances. Errors with the laminator can result in damage to the document being laminated. Do not laminate any materials with a thickness greater than 1.0 mm. Should you do so, the laminating pouch could become angled incorrectly inside the device. This would damage the laminating pouch, the document being laminated as well as the laminator. Do not use an extension cable. Place the appliance where the power wall socket is easily accessible, so that in the event of an emergency the plug can be quickly withdrawn. Do not use an external timing switch or a separate remote control system to operate the appliance.

Fire hazard!

Do not use the appliance near hot surfaces. Do not retain the appliance in places exposed to direct sunlight, this could lead to overheating and cause irreparable damage. Do not leave the appliance unattended when in use. NEVER cover the ventilation slits on the top of the appliance while it is switched on.

Injury hazard!

Keep children away from the connecting cable and the appliance. Children frequently underestimate the danger from electrical appliances. Ensure the appliance has a secure positioning. Do not operate the appliance if it has fallen or is damaged. Arrange for the appliance to be checked and, if needed, repaired by experts. Some parts of the appliance become very hot during operation. To avoid burns, do not touch these parts.

Risk of electrical shock!
Connect the appliance to a power socket with a mains voltage of 220 -240 V ~ /50 Hz. Do not operate the appliance if the power cable or power plug is damaged. Arrange for defective power plugs and/or cables to be replaced at once by qualified technicians or our Customer Service Department. Never immerse the appliance in water. Just wipe it with a damp cloth. Do not expose the appliance to precipitation and never use it in a humid or wet environment. Ensure that the power cable does not become wet during operation. Unplug the appliance immediately after use. The appliance is free of electricity only when you remove the power plug from the power socket. Do not open the housing or attempt to repair the appliance yourself. Should you do so, safety is no longer assured and the warranty is voided.
6. Suitable laminating pouches
For hot lamination you can use pouches with a width of up to 230 mm and a thickness of maximum 125 Micron. Please note that each laminating pouch may only be used once. For hot lamination, use only laminating pouches that are expressly designated for hot lamination. For cold lamination, use only laminating pouches that are expressly designated for cold lamination. Note that the laminating pouches included with the laminator are intended exclusively for hot lamination.

7. Operating levels

Switch setting Selector switch r Switch setting Foil thickness switch i
Laminating foil thickness

HOT HOT COLD

> 60 - - 125 to 200
The attainment of the operating temperature is indicated through the lighting up of the green LED indicator lamp "Ready" y. For a more uniform laminating result we recommend, especially for thinner foils (below 125 Micron) and with adjustment to a different foil thickness, to first wait an additional ca. 2-3 minutes before beginning with lamination.
Tip: For high-gloss photos, select the switch setting "125".
Lay the document to be laminated into a laminating pouch of the appropriate size. Make certain that all corners of the document have at least two millimetres of space to the edge of the laminating pouch, as shown in Fig. 1. Make certain that you use only one pouch for laminating. First open it up, as shown in Fig. 2.

8. Preparing for hot lamination
Insert the pouch guide q into the holes provided on the rear of the laminator. Fold apart the pouch guide q. Insert the laminator power plug into a power socket. Ensure the appliance has a stable positioning. Switch the appliance on by flipping the ON / OFF switch e. The red ON / OFF Indicator lamp t now glows. Place the selector switch for hot or cold lamination r to "HOT". Only activate the pouch thickness switch i when the appliance is switched on.

Fig. 1

For information about the lamination process, please read section 10.
Shift the pouch thickness switch i to the desired foil thickness (80 or 125 Micron). The laminator now heats itself up to the operating temperature. The laminator has reached its operating temperature as soon as the green LED indicator light "Ready" y glows.

Seite 5

Fig. 2
Switch the appliance on by flipping the ON / OFF switch e. The red ON / OFF LED indicator lamp t glows. Place the selector switch for hot or cold lamination r to "COLD". As soon as the green LED indicator lamp "Ready" y glows, you can start with cold lamination. Lay the document to be laminated into a laminating pouch of the appropriate size. Make certain that all corners of the document have at least two millimetres of space to the edge of the laminating pouch, as shown in Fig. 1. Make certain that you use only one pouch for laminating. First open it up, as shown in Fig. 2. For information about the lamination process, please read section 10.
9. Preparing for cold lamination
If you have previously performed hot lamination: After hot laminating, allow the laminator to cool down completely before beginning with cold lamination. Remember, the rolls inside the laminator will still be hot. These can damage the laminating pouch and the document to be laminated! Insert the pouch guide q into the holes provided on the rear of the laminator. Fold apart the pouch guide q. Insert the laminator power plug into a power socket. Ensure the appliance has a stable positioning. Note: With cold lamination, ALWAYS place the Anti-Blocking switch i to 125 mic.

10. Lamination process

Lay the laminating pouch on the pouch guide
q. Place the right or left edge of the laminating pouch on the pouch format restraint w (closed
side to the front). Slide the pouch format restraint w together until the selected format size is reached. This prevents the laminating pouch from being pulled in at an angle. Should the laminating pouch be pulled in at an angle, use the "Anti-Blocking Funktion" as described in chapter 11.

Now slide the laminating pouch slowly into the When you have slid the laminating pouch several centimetres into the slot, it will be pulled in automatically. Release the laminating pouch as soon as you notice it being pulled in automatically.
slot for manual pouch input o.

Seite 6

Ensure there is at least 30 cm of open space in front of the laminator. If you do not, the laminating pouch will not be completely ejected from the laminator after lamination. This could damage the laminated pouch.

12. Cleaning and care

Life-threatening risk of electrical shock: NEVER open the housing. There are no user serviceable components inside. NEVER immerse the appliance components into water or other liquids! Cleaning the housing: Clean the surface of the housing with a slightly noistened dish cloth.
The laminated pouch is ejected from the pouch
ejector slot u of the laminator. Only after hot lamination: When the laminated pouch is ejected from the pouch ejector slot u of the laminator it is still hot and its shape may change slightly. For this reason, allow the laminated pouch to cool down for at least one minute before touching it. To improve the lamination result, you can weigh down the still hot laminated pouch with a book, a file folder or any other heavy, flat object. This helps achieves a flat, flawless surface.
First remove the power plug. Allow the appliance to cool down completely. Ensure that no moisture can permeate into the
appliance. Cleaning the interior of the appliance: With every lamination, contaminants are deposited on the rollers inside the laminator. Over time, this reduces the performance of the laminator. You should therefore clean the rollers inside the laminator after use.
11. Anti-Blocking Function (ABS)
At the start of the lamination process, the pouch may be pulled in at an angle or jam itself inside the appliance.
Prepare the appliance as described in chapter 8 "Preparing for hot lamination", up to the point where the green LED indicator lamp "Ready" y glows.
Slide the Anti-Blocking switch (ABS) i to the position ABS. The laminate pouch is not pulled any further in. Remove the laminate pouch. Slide the Anti-Blocking switch (ABS) i back to the desired foil thickness. Re-start the lamination process.

Then run a sheet of DIN A4 paper folded in the
middle (maximum thickness 1.0 mm) without a laminating pouch and with the fold first slowly into the slot for manual pouch input o.

Seite 7

Release the sheet as soon as you notice it being
pulled in automatically. The contaminants on the rollers inside the laminator are now transferred to this sheet of paper. The paper is ejected from the pouch ejector slot u of the laminator. Repeat this cleaning process several times. Use a fresh clean sheet of paper each time. When you no longer see any contaminants on the paper, the rollers inside the laminator are clean.
15. Warranty & Service
The warranty for this appliance is for 3 years from the date of purchase. This appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase date. Should a claim need to be made under the warranty, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured. The warranty covers ONLY claims for material and maufacturing defects, not for wearing or consumable or for damage to fragile components. This product is for private use only and is not intended for commercial applications. The warranty will become void in the event of abusive and improper handling, use of force and internal tampering not carried or approved by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. DES Ltd Units 14-15 Bilston Industrial Estate Oxford Street Bilston WV14 7EG Tel.: 0870/787-6177 Fax: 0870/787-6168 e-mail: support.uk@kompernass.com Irish Connection Harbour view Howth Co. Dublin Tel: 00353 (0) Fax: e-mail: support.ie@kompernass.com

13. Storage

Allow the appliance to cool down completely before placing it in storage. Do not store the laminator in damp locations where moisture could enter inside the appliance. (E.g. cellars)!

14. Disposal

Do not dispose of the appliance in your normal domestic waste. This product is subject to the European guideline 2002/96/EC. Dispose of the appliance through an approved dis-posal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre. Dispose of all packaging materials in an environmentally responsible manner.

Seite 8

16. Importer
KOMPERNASS GMBH BURGSTRASSE BOCHUM, GERMANY www.kompernass.com
KOMPERNASS GMBH BURGSTRASSE 21 D-44867 BOCHUM www.kompernass.com ID-Nr.: KH4412-01/09-V2

16. Importatore

- 16 -

Seite 17

CONTENT
1. Intended use 2. Items supplied 3. Appliance description 4. Technical data 5. Safety instructions 6. Suitable laminating pouches 7. Operating levels 8. Preparing for hot lamination 9. Preparing for cold lamination 10. Lamination process 11. Anti-Blocking Function (ABS) 12. Cleaning and care 13. Storage 14. Disposal 15. Warranty & Service 16. Importer
Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Pass the manual on to whomsoever might acquire the appliance at a later date.

- 17 -

Seite 18

LAMINATOR KH 4412

1. Intended use
The laminator is intended exclusively for use in private households, for the hot and cold lamination of documents made from paper or cardboard. It is NOT intended for use with any other materials. It is also NOT intended for commercial or industrial applications. No warranty is provided for damages resulting from improper use of the appliance!

4. Technical data

Power supply: Power consumption: Power consumption: Laminating speed:

Foil size

220 - 240 V~ 50 Hz 1,4 A 300 W

80 Micron

125 Micron
approx. 45 Sec. approx. 35 Sec.
approx. 55 Sec. approx. 40 Sec.

2. Items supplied

1x Laminator Lervia KH 4412 10x Laminating pouches DIN A4 for hot laminating (80 micron) 10x Laminating pouches DIN A5 for hot laminating (80 micron) 10x Laminating pouches for hot lamination of business (80 micron) 1 x Operating Instructions
Lamination thickness: Foil width: Pouch thickness: Hot lamination: Cold lamination: Protection class:
max. 1 mm (cold lamination) Max. 230 mm max. 125 Micron max. 200 Micron II

5. Safety instructions

This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance. Unplug the power cable after every use and before cleaning, so as to prevent the appliance from being switched on inadvertently. Check the appliance and all components for visible damages. The safety concept can only work if the appliance is in a fault-free condition. Never perform hot lamination on flammable, heat-sensitive and/or meltable materials and do not laminate drawings on temperature-sensitive paper or material that will undergo changes in colour or quality when subjected to heat.

3. Appliance description

q Pouch guide (rear) w Pouch format restraint e ON / OFF switch r Selector switch for hot and cold lamination

(HOT and COLD) t ON / OFF Indicator lamp y Indicator lamp "Ready" u Pouch ejector slot (front) i Anti-Blocking switch and pouch thickness switch o Slot for manual pouch input

- 18 -

Seite 19
Never laminate valuable or unique documents. Although the laminator satisfies all predominant safety norms and standards, errors can never be completely discounted - as with all electrical appliances. Errors with the laminator can result in damage to the document being laminated. Do not laminate any materials with a thickness greater than 1.0 mm. Should you do so, the laminating pouch could become angled incorrectly inside the device. This would damage the laminating pouch, the document being laminated as well as the laminator. Do not use an extension cable. Place the appliance where the power wall socket is easily accessible, so that in the event of an emergency the plug can be quickly withdrawn. Do not use an external timing switch or a separate remote control system to operate the appliance.

Fire hazard!

Do not use the appliance near hot surfaces. Do not retain the appliance in places exposed to direct sunlight, this could lead to overheating and cause irreparable damage. Do not leave the appliance unattended when in use. NEVER cover the ventilation slits on the top of the appliance while it is switched on.

Injury hazard!

Keep children away from the connecting cable and the appliance. Children frequently underestimate the danger from electrical appliances. Ensure the appliance has a secure positioning. Do not operate the appliance if it has fallen or is damaged. Arrange for the appliance to be checked and, if needed, repaired by experts. Some parts of the appliance become very hot during operation. To avoid burns, do not touch these parts.
Risk of electrical shock!
Connect the appliance to a power socket with a mains voltage of 220 -240 V ~ /50 Hz. Do not operate the appliance if the power cable or power plug is damaged. Arrange for defective power plugs and/or cables to be replaced at once by qualified technicians or our Customer Service Department. Never immerse the appliance in water. Just wipe it with a damp cloth. Do not expose the appliance to precipitation and never use it in a humid or wet environment. Ensure that the power cable does not become wet during operation. Unplug the appliance immediately after use. The appliance is free of electricity only when you remove the power plug from the power socket. Do not open the housing or attempt to repair the appliance yourself. Should you do so, safety is no longer assured and the warranty is voided.

6. Suitable laminating pouches
For hot lamination you can use pouches with a width of up to 230 mm and a thickness of maximum 125 Micron. Please note that each laminating pouch may only be used once. For hot lamination, use only laminating pouches that are expressly designated for hot lamination. For cold lamination, use only laminating pouches that are expressly designated for cold lamination. Note that the laminating pouches included with the laminator are intended exclusively for hot lamination.

- 19 -

Seite 20

7. Operating levels

Switch setting Selector switch r Switch setting Foil thickness switch i
Laminating foil thickness

> 60 - - 125 to 200

The attainment of the operating temperature is indicated through the lighting up of the green LED indicator lamp "Ready" y. For a more uniform laminating result we recommend, especially for thinner foils (below 125 Micron) and with adjustment to a different foil thickness, to first wait an additional ca. 2-3 minutes before beginning with lamination.
Tip: For high-gloss photos, select the switch setting "125".
Lay the document to be laminated into a laminating pouch of the appropriate size. Make certain that all corners of the document have at least two millimetres of space to the edge of the laminating pouch, as shown in Fig. 1. Make certain that you use only one pouch for laminating. First open it up, as shown in Fig. 2.
8. Preparing for hot lamination
Insert the pouch guide q into the holes provided on the rear of the laminator. Fold apart the pouch guide q. Insert the laminator power plug into a power socket. Ensure the appliance has a stable positioning. Switch the appliance on by flipping the ON / OFF switch e. The red ON / OFF Indicator lamp t now glows. Place the selector switch for hot or cold lamination r to "HOT". Only activate the pouch thickness switch i when the appliance is switched on.
For information about the lamination process, please read section 10.
Shift the pouch thickness switch i to the desired foil thickness (80 or 125 Micron). The laminator now heats itself up to the operating temperature. The laminator has reached its operating temperature as soon as the green LED indicator light "Ready" y glows.

- 20 -

Seite 21

Fig. 2

Switch the appliance on by flipping the ON / OFF switch e. The red ON / OFF LED indicator lamp t glows. Place the selector switch for hot or cold lamination r to "COLD". As soon as the green LED indicator lamp "Ready" y glows, you can start with cold lamination. Lay the document to be laminated into a laminating pouch of the appropriate size. Make certain that all corners of the document have at least two millimetres of space to the edge of the laminating pouch, as shown in Fig. 1. Make certain that you use only one pouch for laminating. First open it up, as shown in Fig. 2. For information about the lamination process, please read section 10.

9. Preparing for cold lamination
If you have previously performed hot lamination: After hot laminating, allow the laminator to cool down completely before beginning with cold lamination. Remember, the rolls inside the laminator will still be hot. These can damage the laminating pouch and the document to be laminated! Insert the pouch guide q into the holes provided on the rear of the laminator. Fold apart the pouch guide q. Insert the laminator power plug into a power socket. Ensure the appliance has a stable positioning. Note: With cold lamination, ALWAYS place the Anti-Blocking switch i to 125 mic.

10. Lamination process

Lay the laminating pouch on the pouch guide
q. Place the right or left edge of the laminating pouch on the pouch format restraint w (closed
side to the front). Slide the pouch format restraint w together until the selected format size is reached. This prevents the laminating pouch from being pulled in at an angle. Should the laminating pouch be pulled in at an angle, use the "Anti-Blocking Funktion" as described in chapter 11.
Now slide the laminating pouch slowly into the When you have slid the laminating pouch several centimetres into the slot, it will be pulled in automatically. Release the laminating pouch as soon as you notice it being pulled in automatically.

- 21 -

slot for manual pouch input o.

Seite 22

Ensure there is at least 30 cm of open space in front of the laminator. If you do not, the laminating pouch will not be completely ejected from the laminator after lamination. This could damage the laminated pouch.

12. Cleaning and care

Life-threatening risk of electrical shock: NEVER open the housing. There are no user serviceable components inside. NEVER immerse the appliance components into water or other liquids! Cleaning the housing: Clean the surface of the housing with a slightly noistened dish cloth.
The laminated pouch is ejected from the pouch
ejector slot u of the laminator. Only after hot lamination: When the laminated pouch is ejected from the pouch ejector slot u of the laminator it is still hot and its shape may change slightly. For this reason, allow the laminated pouch to cool down for at least one minute before touching it. To improve the lamination result, you can weigh down the still hot laminated pouch with a book, a file folder or any other heavy, flat object. This helps achieves a flat, flawless surface.
First remove the power plug. Allow the appliance to cool down completely. Ensure that no moisture can permeate into the

appliance. Cleaning the interior of the appliance: With every lamination, contaminants are deposited on the rollers inside the laminator. Over time, this reduces the performance of the laminator. You should therefore clean the rollers inside the laminator after use.
11. Anti-Blocking Function (ABS)
At the start of the lamination process, the pouch may be pulled in at an angle or jam itself inside the appliance.
Prepare the appliance as described in chapter 8 "Preparing for hot lamination", up to the point where the green LED indicator lamp "Ready" y glows.
Slide the Anti-Blocking switch (ABS) i to the position ABS. The laminate pouch is not pulled any further in. Remove the laminate pouch. Slide the Anti-Blocking switch (ABS) i back to the desired foil thickness. Re-start the lamination process.
Then run a sheet of DIN A4 paper folded in the
middle (maximum thickness 1.0 mm) without a laminating pouch and with the fold first slowly into the slot for manual pouch input o.

- 22 -

Seite 23
Release the sheet as soon as you notice it being
pulled in automatically. The contaminants on the rollers inside the laminator are now transferred to this sheet of paper. The paper is ejected from the pouch ejector slot u of the laminator. Repeat this cleaning process several times. Use a fresh clean sheet of paper each time. When you no longer see any contaminants on the paper, the rollers inside the laminator are clean.
15. Warranty & Service
The warranty for this appliance is for 3 years from the date of purchase. This appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase date. Should a claim need to be made under the warranty, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured. The warranty covers ONLY claims for material and maufacturing defects, not for wearing or consumable or for damage to fragile components. This product is for private use only and is not intended for commercial applications. The warranty will become void in the event of abusive and improper handling, use of force and internal tampering not carried or approved by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. DES Ltd Units 14-15 Bilston Industrial Estate Oxford Street Bilston WV14 7EG Tel.: 0870/787-6177 Fax: 0870/787-6168 e-mail: support.uk@kompernass.com Irish Connection Harbour view Howth Co. Dublin Tel: 00353 (0) Fax: e-mail: support.ie@kompernass.com

13. Storage

Allow the appliance to cool down completely before placing it in storage. Do not store the laminator in damp locations where moisture could enter inside the appliance. (E.g. cellars)!