KH6510_11_A4_V3_EN.qxd

24.08.2006

12:24 Uhr

Seite 1
Komperna GmbH Burgstrasse 21 D-44867 Bochum www.kompernass.com ID Nr.: KH6510/6511-07/06-V3

12:25 Uhr

Seite 2
DVD player KH 6510/KH 6511 Operating instructions

Seite 3

The Silvercrest KH 6510/6511 DVD player contains copyright protection technology, which protects it from process claims of certain US patents, for example other intellectual property rights of the Macrovision corporation and other copyright owners.
Use of this copyright protection technology must be approved by the Macrovision corporation and is restricted exclusively to non-commercial private home use. any other use requires the express approval of Macrovision Corporation.
Reverse engineering and disassembling are expressly prohibited.
Manufactured under license from Dolby Laboratories, Inc.
Dolby and the double-D-symbols are registered trademarks of Dolby Laboratories, Inc. Confidential Unpublished Works.
1992-1997 Dolby Laboratories, Inc. All rights reserved.
This device is protected by US patents 4.631.603, 4.577.216, 4.819.098, 4.907.093 and 6.516.132.
The license applies exclusively to private use.
The Silvercrest KH 6510/6511 DVD player is licensed as a DivX Certified Product.

Seite 4

Operating controls and connections

Front panel

q w e r t y u i o a s d f g h j k l ; 2) 2! 2@ 2# 2$ 2% 2^ 2& 2* 2( 3) 3! 3@ q w e r t y u i o a s d f g h j k l ; 2) 2! 2@ 2# 2$ 2% 2^ 2& 2* 2( 3) 3! 3@ 3#
Display IR remote sensor Disc tray Button (Open/Close) Memory card slot USB slot Indicator lamp Button (Scan forward) Button (Scan backwards) Button (Skip forward) Button (Skip backwards) Button (Stop) Button / (Play/Pause) Button ON/OFF

Fig. 1 Front panel

f dsaoi

Rear panel

Digital OUT socket "Coaxial" Surround cinch socket "Center" Surround cinch socket "SL" Surround cinch socket "FL" "Video OUT" cinch socket "VGA OUT" socket Stereo cinch socket "L" Stereo cinch socket "R" "Euro Scart" socket Mains cable with power plug "Pr/Cr" cinch socket "Pb/Cb" cinch socket "Y" cinch socket "S-Video OUT" socket Surround "FR" cinch socket Surround "SR" cinch socket Surround "Subwoofer" cinch socket Digital Out "Optical" socket

h j kl ;

3@ 3! 3) 2( 2*

Fig. 1.2 Rear panel

2& 2^ 2% w

Remote control

Button Standby Button Dimmer (Display brightness adjustment) Button (Open/Close) Button. Page +/Button +/- (Increase or reduce volume) Button Mute (Switch off sound) Button Skip + (Skip forward) Button Skip - (Skip backward) Button (Stop) Button (Play) Button DVD/Card/USB (Show contents of memory card) Button OK (Confirm input) Control buttons Button Video Out (Adjust video output) Button Search (Select time position) Button Angle (Change the camera perspective) Button CLR (Delete input) Button PRG (Superimpose the program menu) Button Zoom (Increase/reduce picture size) Button Mark (Bookmark function) Button AB (Repeat sequence) Button Mode (Superimpose playback mode) Button Title (Superimpose DVD/CD contents) Button Menu (Superimpose DVD menu) Button Subtitle (Superimpose subtitles) Button Audio (Change playback language) Button Display (Superimpose disc Information) Button Setup (Superimpose OSD menu) Button Pause/Step Button F.FWD (Scan forward) Button F.RWD (Scan backwards) Button Slow (Adjust playback speed) Number buttons 0 to 9 (Number input 0-9)

3# t 3@ 3) 3! 2( a 2* d f 2& 2^ 2$ 2@ 2% 2# 2! ; h k l 2) g j s y i u o

Fig. 2 Remote control

DVD player SilverCrest KH 6510/6511
1. Technical data 2. Applications and functions 3. Delivery Contents 4. Setting up of the DVD player/Safety instructions 5. Remote control
5.1. Inserting the batteries 5.2. Using the remote control 5.3. Replacing the batteries
6. Connecting the DVD player to a Television
6.1. 6.2. 6.3. 6.4. 6.5. Connecting Connecting Connecting Connection Connection to a television via Scart Cable/RGB to a television via S-Video to a television via video input (composite video) via component signal (YPbPr/Progressive Scan und YUV) via VGA
7. Connecting audio components to the DVD player
7.1. Connecting a HiFi system 7.2. Connecting digital audio components via digital cables 7.3. Connecting digital audio components via analogue cables
8. Necessary settings to the DVD player before operation
8.1. 8.2. 8.3. 8.4. 8.5. 8.6. Using the OSD Menu Language Settings Video settings Audio settings Rating settings Misc settings
9. Initial operation of the DVD player
9.1. Inserting the DVD 9.2. Inserting memory cards/USB memory sticks with MP3-/WMA-/DivX-/JPEG- data 9.3. Removal of Memory cards/USB Memory sticks from the memory card slot
10. Playing back DVDs, VCDs or S-VCDs
10.1. Features during playback of a DVD, VCD or S-VCD
11. Playback of JPEG-Photo CD/WMA/MP3/MPEG4 12. Cleaning of the DVD player 13. Disposal 14. Troubleshooting 15. Glossary / Key Word Index 16. Important warranty notes
Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Hand over the manual to whomsoever you might pass the device on to.

KH 6510/6511

1. Technical data
Power supply: Power consumption : TV standard: Operating temperature: Humidity: Video output Output level: Horizontal resolution: Signal-to-noise ratio: Audio output Impedance: Output level: Harmonic distortion: Dynamic range: Signal-to-noise ratio: AC 220 V - 240 V ~50 Hz 15 Watt PAL/NTSC +5 ~ +35C 5 ~ 90 % (no condensation)
LCD/Plasma picture screens or video-projectors, if for this the corresponding connection potential is available and the connection of a DVD player is provided for/allowed by the manufacturer of the playback device You can connect to the Silvercrest KH 6510/KH 6511 DVD player for sound output, for example music from the speaker of one of the televisions connected to the DVD player from external audio components such as a HiFi system, receiver or surround sound system (analogue/digital)

1 + 0.2/-0.2 Vp-p (75 ) > = 500 Lines >60 dB

IMPORTANT!

10 k 1.8 + 0.2/-0.8 Vrms (1kHz 0 dB) <0.01 % (JIS-A 1kHz, typical) >80 dB (JIS-A 1 KHz, typical) >95 dB (JIS-A 1 kHz, typical) No liability/warranty will be assumed for damage resulting from improper use of the device!

3. Delivery Contents

1. 2. 3. 4. 5. 6. 7. 8. DVD player Infra red remote control 2 Batteries for remote control, type AAA/ (Micro cells) RGB-Scart cable Audio/Video-Cinch cable Nero Digital CD Instruction manual Demo DVD (only in Germany/Austria)
Digital audio output Coaxial output and optical output
2. Applications and functions
The Silvercrest KH 6510/ KH 6511 DVD player is exclusively intended. as an electronic entertainment device for the playback.
4. Setting up of the DVD player/Safety instructions
.of DVD videos in 12 cm and 8 cm (diameter) formats with Country/Regional code 2 or , designated by the Logo. .of the video formats MPEG-4/MPEG-4 ASP and with DivX 3.11, DivX 4.x, DivX 5.x, multichannel DivX and DivX Pro as well as Nero Digital compressed videos. . of video-CDs (VCDs) and Super video-CDs (S-VCDs) in 12 cm and 8 cm (diameter) formats, designated by the Logo. . of audio-CDs in 12 cm and 8 cm (diameter) formats, designated by the Logo. . generally of the data format CD Audio (.cda), MP3 (.mp3), Windows Media Audio (.wma), DivX (.avi), Nero Digital (.mp4) und JPEG (.jpg) on the storage media CD-R, CD-RW, USB memory sticks as well as Memory Cards of the type CF I, CF II, SD, MS, MSPro, MMC und SM. . for stationary operation in enclosed spaces . for private, non commercial use You can connect to the Silvercrest KH 6510/ KH 6511 DVD player for image outputs during playback of DVDs, VCDs, S-VCDs, Audio CDs and the MP3 data formats, Windows Media Audio and JPEG Stereo and Mono televisions with the formats PAL or NTSC and the picture formats 4:3 / 16:9. 1 Carefully remove the DVD player and the supplied accessories from the packing 2 Place the DVD player on an even, straight, and non slippery surface In order to avoid technical glitches, damages, and the risk of an electric shock do not run the DVD player. . in the immediate vicinity of a heat source such as an oven, heat fans and similar devices! Heat contact can lead to the equipment overheating and to melting of plastic parts, whereby the DVD player could be irreparably damaged! Do not place any open sources of fire, like candles, on the device.

Seite 9

7.2. Connecting digital audio components via digital cables In order to enjoy Surround Sound during playback of correspondingly equiped DVDs (recognisable by the Dolby Digital or DTS-Logo) you can connect the DVD player to digital Audio components, for example a Dolby Digitalor DTS-Receiver or a suitable Surround system. you can purchase the necessary cables for the hereafter described connection variants from your dealer. Firstly check with the digital components instruction manual to see if it allows for connection to the DVD player. via a coaxial cable or via an optical cable. Connection via coaxial cable In order to connect the DVD player to a digital audio component with a digital coaxial cable. Connect the "COAXIAL" inscribed plug to the corresponding socket on the digital audio component.
NOTE: Make sure that no dirt can enter into the optical cable socket. This could cause signal interference. Always insert the protective plug into the socket if no optical cable is connected.
7.3. Connecting digital audio components via analogue cables If a digital input is not available on the audio component you can connect the DVD player to it via conventional analogue cinch cables.
xConnecting via optical cable In order to connect the DVD player to a digital audio component with an optical cable. Remove the protective plug from the "Optical" inscribed socket on the rear panel of the DVD player and insert the optical cable plug. Insert the plug at the other end of the optical cable in the corresponding socket of the digital audio component. NOTE: The optical cable is a glass fibre cable and must not be bent during installation. Otherwise the glass fibre contained in the cable could break and the cable would become unusable.
In order to connect the DVD player with analogue cables. Insert a cinch cable in each of. the sockets inscribed with "FL" (front left channel) the sockets inscribed with "FR" (front right channel) the sockets inscribed with "SL" (rear left channel) the sockets inscribed with "SR" (rear right channel) the socket inscribed with "CENTRE" (front centre channel) and the socket inscribed with "SUBWOOFER" (Bass) on the rear panel of the DVD player. insert the cinch cables into the corresponding analogue inputs in the digital audio component.

Then keep pressing the button "Video Out" on the remote control until the Image reappears on the television screen. - Brightness: - Sharpness: Here you set the Brightness (1-16) of the DVD player. Here you set the contrast (1-16) of the DVD player.
8.4. Audio settings In this OSD-Menu you can administer the settings for Bass Management, the size of individual loud speakers, Test Sound, Delays, Digital Audio Outputs, Night Mode and ProLogic.

- DivX Sub Position:

8.3. Video settings In this OSD Menu you can administer the settings for Image format, Screen Mode, TV-Standard, Video-Output, Brightness and Sharpness. -Bass management: Here you can Activate/Deactivate the Bass-Management. Activation (on) is necessary if you are not using a 5.1 amplifier with its own speaker management but rather want the sound output transmitted via a particular amplifier. In this case the DVD player must be informed which kind of speaker (Small/Large) is to be run from the respective sound output. In this way the sound and the separation of Highs, Middles and Basses can be optimally conformed. - Front, Center, Surround, Subwoofer LS: Here you can Activate/Deactivate the particular speaker type and set the size. Large: Bass activated. Small: Bass deactivated. (only with the activation of Bass-Management) Small: No speaker connected - Test tones: Here you can switch on a test sound for each particular audio output in order to check your 5.1 Surround settings. - Delays Center, Surround: Here you set the delays for the Centre speaker and the rear Surround speakers. Each increase in the distance setting corresponds to a delay of one millisecond. With optimal settings the sound reaches your listening location at the same time from all directions. Centre: No delays, 0.3, 0.6, 1, 1.4, 1.7 m. Surround: 1, 2, 3, 4 or 5.1 m

- Aspect Ratio:

- Viwe Mode:

- TV-System:

- Video out:
Here you set the Image format, in which the film should be displayed on the television screen (4:3 or 16:9). The correct setting depends on the television to which you would like to connect the DVD player. Here you can adapt the Height and width of the Image to the playback device being used, for example Pan & Scan (Adaptation of Image width formats to the 4:3 Image). Here you set the TV-Standard (PAL/NTSC/ Multi) of your playback device. Only set "Multi" if you have connected the DVD player to a Multi standard television. Here you set the Vidio-Output, through which the DVD player is connected to the playback device.
In the event that you set an incorrect Vidio-Output, for example "P-Scan", although your television is not capable of Progressive Scan, then the television screen will suddenly become black. This is not a defect of the television or the DVD player! In a case such as this. Press the "Stop" button on the front panel of the DVD player or on the remote control.

Always be sure to insert the memory cards into the memory card slots as described below! Never bend the memory cards while inserting them into the memory cards slots! With gentle pressure slide the memory card into the memory card slot as far as it will go. Allow the memory card to slide in without force: Check to make sure that the memory card is one that the DVD player is capable of reading. Do not attempt to insert memory cards of a different type into one of the memory card slots! Make sure that you have inserted the memory card into the memory card slot in the correct manner. Under no circumstances attemt to force the memory card into the memory card slot! Otherwise the DVD player, memory card and the data on the memory card could be damaged! Supported memory card types and capacities Memory cards of the types CFI/CFII (512 MB), SD (512 MB), MS/MSPro (128 MB), MMC (128 MB) and SM (128 MB) can be read. Supported file structure and file formats - 2 file levels are supported - The total file count should be not more than 10 (max. 5 files on each of the 2 file levels) - A max. of 100 files are supported on the memory media - Files with mixed file formats are not supported - A JPEG file larger than 1 MB can lead to faulty images on the television screen

- 13 -

Seite 14
SmartMedia memory cards (SM) NOTE: Only SmartMedia memory cards of type 3.3 V can be used! SmartMedia memory cards of type 5 V cannot be used! You can easily distinguish SmartMedia memory cards by means of the following diagram:
MermoryStick memory cards (MS/MSPro) MemoryStick memory cards must be inserted into the upper memory card slot. Insert MF memory cards into the upper memory card slot straight and with the contacts forward. Thereby. - the side of the memory card that the contacts are on must be facing downwards and - the slanted corner of the memory card must be on the left side.

128 MB

5 Volt
You must insert the SmartMedia memory cards (3,3V) into the upper memory card slot. Insert the SM memory card into the upper memory card slot straight and with the contacts forward. Thereby. - the side of the memory card that the contacts are on must be facing upwards and - the slanted corner of the memory card must be on the right side. CompactFlash memory cards (CF I/CF II) CompactFlash memory cards types 1 and 2 must be inserted into the lower memory card slot. Insert CFmemory cards into the upper memory card slot with the contacts straight and forward. The side of the memory card with the manufacturer's logo label must face up.

Open the disc tray on the front panel of the DVD player by pressing the button "Open/Close" on the front panel of the DVD player or on the remote control. "Open" will now appear In the display on the front panel of the DVD player and on the television screen. Insert a DVD/VCD/S-VCD disc in the disc tray with the inscribed/labled side up. Press the button "Open/Close" on the front panel of the DVD player or on the remote control again to close the disc tray. "Close" will appear in the display on the front panel of the DVD player and on the television screen while the disc tray is closing. The contents of the inserted DVD/VCD/S-VCD will now be loaded; this may take a few seconds. Meanwhile "Load" will flash in the display on the front panel of the DVD player and "Read" will appear on the television screen. Playback of the inserted DVD/VCD/S-VCD starts automatically. NOTE: DVDs, VCDs and S-VCDs, that you want to playback with the DVD player possibly have a country code, which is printed on the DVD cover. The DVD player can only playback DVDs/VCDs/S-VCDs with the country code 2. If no country code is printed on the cover of a DVD/VCD/ S-VCD. but instead the symbol , then the DVD/VCD/S-VCD can be played back with the DVD player Then the DVD/VCD/S-VCD can possibly not be played back with the DVD player. You can check this by attempting to play back the DVD.

- 15 -

Seite 16
Stop playback To stop playback of the film on the inserted DVD/VCD/S-VCD press the button "Stop" on the front panel of the DVD player or on the remote control. with the Resume function If you have stopped playback of the inserted DVD/VCD/S-VCD by pressing the "Stop" button once then the DVD player automatically saves the position, at which the playback was interupted. This function is called the "resume function". "Stop [Play to continue]" will be shown on the television screen. As soon as you again press the button "Play" on the front panel of the DVD player or on the remote control playback will continue from the saved position. without Resume function If you have stopped playback of the inserted DVD/VCD/S-VCD by pressing the "Stop" button once and you press the "Stop" button a second time then the saved position, at which playback was interupted, is deleted. As soon as you press the "Play" button again playback of the inserted DVD/VCD/S-VCD will start from the beginning. To activate the DVD Menu NOTE: This function may possibly not be available on all DVDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. Many films on DVD have a root menu on the disc that offers the option to play the main film as well as other options, such as subtitle language selection and film tone direct chapter selection playback of the film's bonus material (background information "Making of" etc.) If such a menu is present on the DVD that is inserted into the DVD player then you can activate it during playback by pressing the button "Menu" on the remote control You select individual menu options by pressing the control buttons on the remote control; to confirm the selected menu option you press. the "Play" button on the front panel of the DVD player or on the remote control or the "OK" button on the remote control. To return to playback press the button "Menu" again on the remote control. Use the button "Page-" and "Page+" to select between the pages of the DVD menu.

NOTE: This function is not available on all DVDs. NOTE: If you stopped playback by pressing the "Stop" button twice (playback stop without resume function) activation of the main menu on the disc is not possible. Playback Control (PBC) with VCDs/S-VCDs Many VCDs/S-VCDs have playback control (in short "PBC"). playback control means a main menu, which allows for operation of several functions of the VCD/S-VCD. If PBC is available on the disc inserted into the DVD player then you must first activate it in order to superimpose the menu. To activate PBC. During playback or while playback is stopped press the button "Mode" on the remote control. The "Playback Mode" menu will be superimposed on the television screen:
The menu option "Mode" is automatically selected first. By pressing the button"OK" on the remote control you can select between the options "Off", "Random" and "PBC". Set to "PBC" and press the "Mode" button again. The "Playback Mode" menu will fade out, PBC is now switched on. NOTE: If you switch PBC on during playback it is possible that playback will stop then start again at the beginning. To superimpose the PBC main menu press the button "Menu" on the remote control during playback. Skip to beginning of chapter (Skip) NOTE: This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. With the "Skip forward" and "Skip backwards" buttons on the remote control or on the front panel of the device you can manoeuvre inside the film on the inserted DVD/VCD/S-VCD during playback. forwards to the beginning of the next chapter or skip backwards to the previous chapter The chapter selected will immediately play back without the necessity of pressing the "Play" button. The number of the selected chapter will show in the display on the front panel of the DVD player to the left of the played time indicator.

On this theme see also the chapter "Superimpose disc information" on page 20. Programming example You may enter the chapters with the numbers 03 and 10 of a film on a DVD/VCD/S-VCD for programmed playback; in this example the main film has the title number 01: In the programme menu the first title is automatically tagged. To confirm the selection press the "OK" button. The chapter of the first title now appears. Select the third chapter with the control buttons and confirm the selection with the "OK" button. The chapter will be filed on the first programme position. Select the tenth chapter with the control buttons and confirm the selection with "OK". The chapter will be filed on the second programme position. Select the option "Playback" with the control buttons below the input field. Press the "OK" button. The programmed playback now starts with chapter 3. Superimpose disc information NOTE: This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. With this function you can superimpose, during playback, on the television screen all available information pertaining to a DVD/VCD/S-VCD inserted in the DVD player. For this. During playback press the "Display" button on the remote control. On the television screen will be superimposed: In respect to DVDs: the time already played back of the currently running DVD in hours, minutes and seconds the time left to the end of the film in hours, minutes and seconds the type of the inserted disc (DVD) the current title number/the total number of titles the current chapter number/the total number of chapters the currently entered playback language the current selected sub title setting the current selected camera perspective/the number of currently available camera perspectives (Angles)
Use the control buttons on the remote control to select the desired title. Confirm the selection by pressing the "OK" button. The chapter pertaining to the title will appear.
Use the control buttons on the remote control to select the desired chapter. Confirm the selection by pressing the "OK" button. The chapter will be filed on the first memory cell. Further chapters will, in turn, be filed in the memory cells 2-16. To delete the current last input select the input field "Delete" with the control buttons or press once the "CLR" button. By pressing the "CLR" button again the last chapter input in each case is always deleted. What are titles and chapters? On this topic, please refer to Section 15. "Glossary / KeyWord Index. When you have programmed the desired chapter select the option "Playback" below the input field using the control buttons. Press the "OK" button. The programmed playback now starts with the chapter entered in the programme memory cell 1. Inside the programmed chapter you can skip to the start of the next or preceeding chapter by pressing the "Skip+" or "Skip-" buttons on the front panel of the DVD player or on the remote control. To delete the programmed playback press the "Stop" button on the front panel of the DVD player or on the remote control twice during playback.

- 19 -

Seite 20
For VCDs/S-VCDs: the time already played back of the currently running VCD/S-VCD in hours, minutes and seconds the time left to the end of the film currently playing in hours, minutes and seconds the type of inserted disc (VCD/S-VCD) the current playback language setting To hide the disc information press the "Display" button again. Switch on several playback modes NOTE: This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. During the playback of a DVD/VCD/S-VCD you can switch on the following playback modes: Random Playback When you switch on the random playback the chapters on the inserted DVD/VCD/S-VCD will be played back in random order. To switch on the Random Playback. Press the "Mode" button on the remote control during playback. The "Playback Mode" menu will be superimposed on the television screen:
To switch off repeat play. Press the "Mode" button on the remote control during playback. The "Playback Mode" menu will be superimposed on the television screen: Press the control button to select the menu option "Repeat".
In respect to DVDs: By pressing the "OK" button you select between the options "Individual", "All" and "Off". Select "Individual" to repeat the currently playing chapter until repeat play is switched off or playback is stopped by pressing the "Stop" button twice. Select "All" to repeat all chapters one after the other and also the entire film until repeat play is switched off or the playback is stopped by pressing the "Stop" button twice. For VCDs/S-VCDs: By pressing the "OK" button you select between the options "Off", "Individual" and "All". Select "Individual" to repeat the currently playing title of the VCD/S-VCD until repeat play is switched off or the playback is stopped by pressing the "Stop" button twice. Select "All" to repeat the entire VCD/S-VCD until repeat play is switched off or the playback is stopped by pressing the "Stop" button twice. To switch off repeat play press the "Mode" button during playback. Select the option "Off" in the "Playback Modes" menu under the menu option "Repeat". When you press the "Mode" button again repeat play is switched off. Sequence repeat (A - B) With this function you can repeatedly playback a favourite sequence inside a chapter of the currently playing DVD/VCD/ S-VCD. For this. Press the button "A - B" on the remote control during playback as soon as the beginning of the desired sequence is played back. "Rep A -" will be displayed on the television screen. Press the button "A - B" again as soon as the end of the desired sequence is played back. Take note thereby that the beginning and end of the sequence must be contained inside one chapter. The repeated playback of the selected sequence begins immediately without the necessity of pressing the "Play" button. The sequence will continue to repeat until you press the "A - B" button again in order to switch off the function. Then "Rep AB Off" will be briefly displayed on the television screen.

The menu option "Mode" is automatically selected first. By pressing the "OK" button on the remote control you can select between the options "Normal" and "Random" (with VCDs/S-VCDs the option "PBC" is added). Set to "Random" and press the "Mode" button again. The "Playback Mode" menu is hidden and the random function is now switched on. To switch off the random function press the "Mode" button during playback and select the option "Normal" in the "Playback Mode" menu under the menu option "Modes" by pressing the "OK" button. When you press the "Mode" button again the random function is switched off. Repeated play With the function "Repeated Play" you can.. in respect to DVDs, optionally repeat the title or chapter of the inserted DVD. in respect to VCDs/S-VCDs individual titles and/or the entire VCD/S-VCD repeatedly playback.

- 20 -

Seite 21
Bookmark function During the playback of a DVD/VCD/S-VCD you can place so called "Bookmarks" in order to watch again later selected passages from a film. You can place up to three bookmarks. For this. Press the "Mark" button on the remote control during the playback of a film. On the television screen will be superimposed:
Switch off the DVD player To switch off the DVD player. If a disc inserted into the DVD player is playing you must first stop the playback by pressing the "Stop" button twice on the front panel of the DVD player or on the remote control. Open the disc tray, to remove a currently inserted disc from the DVD player, by pressing the "Open/Close" button on the front panel of the DVD player or on the remote control. After this close the disc tray again by pressing the "Open/Close" button. Press the button "Standby" on the remote control. The DVD player now switches to the "Standby" mode. To switch the DVD player on again press the button "Standby" once more. To turn the DVD player off completely press the "ON/OFF" button on the front panel of the DVD player.
As soon as the passage is reached, on which you want to place a bookmark, press the "OK" button on the remote control. The exact time position of this passage within the film will now be displayed in hours, minutes and seconds under "Bookmark 1". If you want to place another bookmark then press the control button to select "Bookmark 2" in the superimposed field on the television screen. Press the button "OK" again as soon as the passage is reached that you want to place the second bookmark. To place a third bookmark proceed in the same manner. When you have placed all desired bookmarks press the "Mark" button to hide the selected bookmarks on the television screen. Later if you want to skip to the passages, on which you have placed bookmarks press the "Mark" button again. Select the desired bookmark with the control buttons. Confirm the selection by pressing the "OK" button on the remote control. Playback of the selected chapter now begins automatically at the location, on which you have placed the selected bookmark. To delete placed bookmarks press the "CLR" button on the remote control To set the playback volume Press the "Vol +" button on the remote control during playback to increase playback volume or the "Vol-" to reduce playback volume. The volume variance between the values "0" (Sound off) and "16" (Maximum volume) will be superimposed on the television screen. Dimmer Press the button "Dimmer" on the remote control to reduce or increase the brightness of the DVD player's display. On the display appears Hi (bright), "NOr" (normal), "Lo" (Dark) or the display switches off. Mute playback sound (Mute) To mute the playback sound press the button "Mute" on the remote control during playback of DVDs, VCDs/S-VCDs, Audio CDs and CD-Rs/CD-RWs with MP3 or WMA data. The symbol will be displayed on the television screen. When you want to switch on the playback sound again press the button "Mute" once more.

11. Playback of JPEG-Photo CD/WMA/MP3/MPEG4
Place a memory media in the DVD player. If you are using a memory card or USB stick press the "DVD/CARD/USB" button. The contents of the data carrier (CD, DVD, USB memory stick or memory card) will be displayed on the television:
The data will be listed on the left (Data window). On the upper right several settings can be implemented: "Filter", "Repeat", "Mode", "Edit Mode", "Program view" and "Add to Program". On the bottom right is the preview window, in which is displayed the JPEG Image as well as its size. Select a file with the help of the control buttons. Confirm the selection by pressing the "OK" button. The file is implemented i.e. the JPEG-Photo is displayed. Filter function You can filter out designated file types in the display. Switch to the settings window with the help of the control buttons. Select "Filter" and confirm the selection with the "OK" button. You can now select which file types you want to filter out by pressing the "OK" button: Audio, Photo or Video. Press the control button to exit the settings window "Filter".

- 21 -

Seite 22
Repeat function Select the repeat setting in the settings window. By pressing the "OK" button you can select between "Individual" "All" and "Off". - with the "Individual" setting the current file will be repeated until another setting is implemented. - with the setting "All" all files in the current folder will be repeated. - the setting "Off" ends the repeat function. Mode Select the "Mode" setting in the settings window. By pressing the "OK" button you can select between Normal, Random and Intro: - with the setting Random the files will playback in random order. - with the Intro setting 10 seconds of the MP3 data will be played back at a time. If you want to deactivate the Change Mode select the setting "Normal". Edit Mode In Edit Mode you can put together your own programme. Tag the setting "Edit Mode" by pressing the "OK" button.

Digital audio output Coaxial output and optical output
2. Applications and functions
The Silvercrest KH 6515/ KH 6516 DVD player is exclusively intended. as an electronic entertainment device for the playback.
4. Setting up of the DVD player/Safety instructions
.of DVD videos in 12 cm and 8 cm (diameter) formats with Country/Regional code 2 or , designated by the Logo. .of the video formats MPEG-4/MPEG-4 ASP and with DivX 3.11, DivX 4.x, DivX 5.x, multichannel DivX and DivX Pro as well as Nero Digital compressed videos. . of video-CDs (VCDs) and Super video-CDs (S-VCDs) in 12 cm and 8 cm (diameter) formats, designated by the Logo. . of audio-CDs in 12 cm and 8 cm (diameter) formats, designated by the Logo. . generally of the data format CD Audio (.cda), MP3 (.mp3), Windows Media Audio (.wma), DivX (.avi), Nero Digital (.mp4) und JPEG (.jpg) on the storage media CD-R, CD-RW, USB memory sticks as well as Memory Cards of the type CF I, CF II, SD, MS, MSPro, MMC und SM. . for stationary operation in enclosed spaces . for private, non commercial use You can connect to the Silvercrest KH 6515/ KH 6516 DVD player for image outputs during playback of DVDs, VCDs, S-VCDs, Audio CDs and the MP3 data formats, Windows Media Audio and JPEG Stereo and Mono televisions with the formats PAL or NTSC and the picture formats 4:3 / 16:9. 1 Carefully remove the DVD player and the supplied accessories from the packing 2 Remove the protective foil from the front reflector. 3 Place the DVD player on an even, straight, and non slippery surface In order to avoid technical glitches, damages, and the risk of an electric shock do not run the DVD player. . in the immediate vicinity of a heat source such as an oven, heat fans and similar devices! Heat contact can lead to the equipment overheating and to melting of plastic parts, whereby the DVD player could be irreparably damaged! Do not place any open sources of fire, like candles, on the device.

Warning!

In case of overheating there is a risk of fire! . do not play in moist environments, for example in cellars or in the sauna! Moisure penetrating the applicance can lead to malfunctions and cause irreparable damage to the DVD-Player! This device was only designed for stationary operation under normal climatic conditions (temperate climate).

Moisture penetrating into the device creates the risk of an electric shock! . not in the immediate vicinity of water, for example in the bath tub or in the swimming pool. Do not place containers filled with water, for example flower vases, on the DVD player.

Danger! Laser radiation!

The DVD player is equiped with a "Class 1 Laser". Never open the device. Never attempt to repair the device. There is invisible laser radiation inside the device. Do not expose yourself to the laser beam as this could lead to eye injuries.
If water runs into the DVD player or if it falls into water it can be irreparably damaged and the risk of an electric shock exists! . not in cupboards, on shelves or other enclosed furnishings as well as not on beds and covers because the ventilation of the DVD player will be impaired and it could overheat. For the same reason do not place another piece of equipment (i.e. a television) on the DVD player. In order to guarantee sufficient ventilation the selected location of the DVD player must provide for a clearance of at least 10 cm at the rear, on top, and on either side from walls and any other object. This device must not be placed in the immediate vicinity of flammable materials, for example curtains, flammable liquids etc.

5. Remote control

5.1. Inserting the batteries 1 Open the battery compartment on the back of the remote control. 2 Now insert the two batteries type AAA/R 03 (micro cells) included in the package into the battery compartment. Make sure that the batteries are inserted in accordance with the correct polarity. 3 Replace the battery compartment cover.
When overheated the DVD player can be irreparably damaged and the risk of a fire exists!
5.2. Using the remote control In order to guarantee faultless operation when using the remote control Always point the remote control, during use, directely at the DVD player Make sure that there are no obstructions between the remote control and the DVD player that will hinder reception When using the remote control place yourself not more than 5 metres from the DVD player Otherwise interferences can occur during operation of the DVD player functions with the remote control.
For damage to the DVD player that results from. The effects of moisture water penetrating into the equipment Overheating. no liability/warranty will be assumed!
5.3. Replacing the batteries If the operation of the DVD player via the remote control does not function properly or does not function at all the batteries must be replaced Always renew all batteries in order to return the remote control to its full performance ability. NOTE: Used batteries may not be disposed of in household waste. Hand in used batteries at a collection location or disposal site or return them to the place where you bought them. Should you yourself at some time dispose of the DVD player's remote control then you should beforehand, without fail, remove the batteries!

On this topic see also capital
8.3 "Video settings: Set the television standard" Depending on the features of the television, there are various options for connecting the DVD player to it: 6.1. Connecting to a Television via Scart Cable/RGB Note: Connecting the DVD player to a television with a Scart cable via the RGB input offers a high quality connection. Select this connection variation in the case of televisions equiped with an RGB input. If you are not sure if the television is equiped with an RGB input then you can check this by consulting the television's instruction manual.
Connect the jack inscribed with S-video to a television S-Video socket using an S-Video cable. Insert the white audio cinch cable plug into the cinch socket inscribed "L" on the rear panel of the DVD player. Then insert the white plug at the other end of the audio cinch cable into the left channel audio socket on the television. Insert the red audio cinch cable plug into the cinch socket inscribed "R" on the rear panel of the DVD player. Then insert the red plug at the other end of the audio cinch cable into the right channel audio socket on the television. For playback select the matching channel on your television Check with the television's instruction manual on how you can set the AV channel. In the OSD menu select the menu Video/Video output/RGB.
Connect the jack inscribed with Euro Scart to a television Scart socket by using the supplied Scart cable. For playback select the matching channel on your television Check with the television's instruction manual on how you can set the AV channel. In the OSD menu select the menu Video/Video output/RGB.
On this topic see also capital 8.3
"Video settings: Video output.

Seite 7

6.3. Connecting to a television via video input (composite video) For this connection variant the television must be equiped with Audio/Video cinch sockets (Composite Video). In order to connect the DVD player to a television via Composite Video you will need: Audio/Video cinch cable
NOTE: For both variants the television, to which you want to connect the DVD player must have two unoccupied Audio cinch sockets available. The cable connections are the same in both cases; YPbPr-signal for Progressive Scan however can only be used if the television (or Video projector), to which you want to connect the DVD player, is capable of Progressive Scan. If you are not sure whether the television (or Video projector), to which you want to connect the DVD player is capable of Progressive Scan and has cinch sockets available then you can check this by consulting the television's (or Video projectors's) instruction manual. For both variations "YPbPr" and "YUV" you will need an audio cinch cable (not supplied) an YUV cable (not supplied) These can be obtained from your dealer.

If the USB memory stick is inserted correctly into the port the green control light next to the lower loading slot will light up. Press the button "DVD/Card/USB" on the remote control to show the contents of the memory card.
9.3. Removal of Memory cards/USB Memory sticks from the memory card slot Memory cards/USB Memory sticks should only be removed after the memory card slot is deactivated. Thus avoiding the possibility of damage or data loss. Press the button "DVD/Card/USB" on the remote control to return to the DVD mode. The green control light next to the memory card slot will go out. You can now remove the memory card/USB memory stick from the memory card slot.

MS CARD

Open the disc tray on the front panel of the DVD player by pressing the button "Open/Close" on the front panel of the DVD player or on the remote control. "Open" will now appear In the display on the front panel of the DVD player and on the television screen. Insert a DVD/VCD/S-VCD disc in the disc tray with the inscribed/ labled side up. Press the button "Open/Close" on the front panel of the DVD player or on the remote control again to close the disc tray. "Close" will appear in the display on the front panel of the DVD player and on the television screen while the disc tray is closing. The contents of the inserted DVD/VCD/S-VCD will now be loaded; this may take a few seconds. Meanwhile "Load" will flash in the display on the front panel of the DVD player and "Read" will appear on the television screen. Playback of the inserted DVD/VCD/S-VCD starts automatically. NOTE: DVDs, VCDs and S-VCDs, that you want to playback with the DVD player possibly have a country code, which is printed on the DVD cover. The DVD player can only playback DVDs/VCDs/S-VCDs with the country code 2. If no country code is printed on the cover of a DVD/VCD/ S-VCD. but instead the symbol , then the DVD/VCD/S-VCD can be played back with the DVD player Then the DVD/VCD/S-VCD can possibly not be played back with the DVD player. You can check this by attempting to play back the DVD.

- 15 -

Seite 16
Depending on the inserted DVD/VCD/S-VCD it is possible that the contents of the DVD/VCD/s-VCD will not playback immediately, rather first a selection menu appears on the television screen. In this event select the menu option which will start the playback of the film with the control button on the remote control. To start the playback of the film. Press the "OK" button on the remote control. or Press the "Play" button on the front panel of the DVD player or on the remote control. "Play" will briefly be superimposed on the television screen. In the display on the front panel of the DVD player will be shown. if you have inserted a DVD: "DVD" the number of the currently playing title and chapter the played back so far time of the currently playing DVD in hours, minutes and seconds if you have inserted a VCD/S-VCD: "VCD" or "S-VCD" the number of the currently playing title the played back so far time of the currently playing VCD/S-VCD in hours,minutes and seconds 10.1. Features during playback of a DVD, VCD or S-VCD During the playback of a DVD/VCD/S-VCD you can use the following DVD player features. Pause playback To pause the playback of the inserted DVD/VCD/S-VCD. During playback press the button / "Play/Pause" on the front panel of the DVD player or the button "Pause/Step" on the remote control. " " will now appear in the display on the front panel of the DVD player, "Pause" will be displayed on the television screen. On the screen, you will see a paused image of the currently displayed scene. Press the button "Pause/Step" on the remote control to jump to the next image. To continue with the playback of the film press the button "Play".

Stop playback To stop playback of the film on the inserted DVD/VCD/S-VCD press the button "Stop" on the front panel of the DVD player or on the remote control. with the Resume function If you have stopped playback of the inserted DVD/VCD/S-VCD by pressing the "Stop" button once then the DVD player automatically saves the position, at which the playback was interupted. This function is called the "resume function". "Stop [Play to continue]" will be shown on the television screen. As soon as you again press the button "Play" on the front panel of the DVD player or on the remote control playback will continue from the saved position. without Resume function If you have stopped playback of the inserted DVD/VCD/S-VCD by pressing the "Stop" button once and you press the "Stop" button a second time then the saved position, at which playback was interupted, is deleted. As soon as you press the "Play" button again playback of the inserted DVD/VCD/S-VCD will start from the beginning. To activate the DVD Menu NOTE: This function may possibly not be available on all DVDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. Many films on DVD have a root menu on the disc that offers the option to play the main film as well as other options, such as subtitle language selection and film tone direct chapter selection playback of the film's bonus material (background information "Making of" etc.) If such a menu is present on the DVD that is inserted into the DVD player then you can activate it during playback by pressing the button "Menu" on the remote control You select individual menu options by pressing the control buttons on the remote control; to confirm the selected menu option you press. the "Play" button on the front panel of the DVD player or on the remote control or the "OK" button on the remote control. To return to playback press the button "Menu" again on the remote control. Use the button "Page-" and "Page+" to select between the pages of the DVD menu.

- 16 -

Seite 17
NOTE: This function is not available on all DVDs. NOTE: If you stopped playback by pressing the "Stop" button twice (playback stop without resume function) activation of the main menu on the disc is not possible. Playback Control (PBC) with VCDs/S-VCDs Many VCDs/S-VCDs have playback control (in short "PBC"). playback control means a main menu, which allows for operation of several functions of the VCD/S-VCD. If PBC is available on the disc inserted into the DVD player then you must first activate it in order to superimpose the menu. To activate PBC. During playback or while playback is stopped press the button "Mode" on the remote control. The "Playback Mode" menu will be superimposed on the television screen:

Skip to beginning of chapter (Skip) NOTE: This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. With the "Skip forward" and "Skip backwards" buttons on the remote control or on the front panel of the device you can manoeuvre inside the film on the inserted DVD/VCD/S-VCD during playback. forwards to the beginning of the next chapter or skip backwards to the previous chapter The chapter selected will immediately play back without the necessity of pressing the "Play" button. The number of the selected chapter will show in the display on the front panel of the DVD player to the left of the played time indicator. Entry of the title number via number keys NOTE: This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. Instead of using the Skip function you can also enter the title from within the film on the inserted DVD/VCD/S-VCD direct by entering the title number via the number buttons 0 to 9 on the remote control. For this. During playback or while playback is stopped press the number button, corresponding to the title number, on the remote control, for example the "3" button for the third title or "1" followed by "0" for the tenth title. The numbers entered will be briefly superimposed on the television screen. Then press the "OK" button on the remote control. Playback of the title with the entered number will now automatically begin. Search function You can also use the search function to select a title or chapter from the inserted DVD/VCD/S-VCD directly: Direct chapter or time selection via the Search function NOTE: These functions may not be available on all DVDs/VCDs/S-VCDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen.

The input field "Title" marked " " is automatically selected first. Enter the desired title with the number buttons 0 to 9. The title 01 is with most DVDs the main film. Press the control button to select the input field "Chapter" marked " ". Enter the desired chapter with the number buttons 0 to 9. Press the control button to select the input field "time" marked " : ". Enter the time position in hours, minutes and seconds with the number buttons 0 to 9. Examples: To start playback 1 hour, 5 minutes and 30 seconds from the beginning of a film you press, one after the other, the number buttons. "0", "1" for 1 hour; "0", "5" for 5 minutes; "3", "0" for 30 seconds Subsequently press the "OK" button to start playback at the selected position. If you want to delete a position in the input field then select the position to be deleted with the control button and press the button "CLR" on the remote control. The index now skips back to " ". To hide the "Search" menu press the button "Search" again on the remote control. Rapid search forward/backward To select designated passages with Quick search during playback of the inserted DVD/VCD/S-VCD. For Quick search forward press the button "F.FWD". once for doubled Quick search speed; "x2" will be displayed on the television screen twice for quadrupled Quick search speed; "x4" will be displayed on the television screen three times for eightfold Quick search speed; "x8" will be displayed on the television screen four times for sixteenfold Quick search speed; "x16" is displayed on the TV screen five times for thirtytwofold Quick search speed; "x32" is displayed on the TV screen

- 18 -

14:20 Uhr

Seite 19

Frame advance/reverse playback NOTE: This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. To shunt the contents of an inserted DVD/VCD/S-VCD forward one frame at a time. During playback press the "Pause/Step" button to stop playback. On the screen, you will see a paused image of the currently displayed scene. With each further press on the "Pause/Step" button you will shunt the paused image forward one frame at a time. To continue with playback press the "Play" button on the front panel of the DVD player or on the remote control. Zoom NOTE: This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. During playback of an inserted DVD/VCD/S-VCD you can zoom in to the image on the television screen in three stages. For this you press the "Zoom" button on the remote control. once for the first zoom stage; "1" will be displayed on the television screen twice for the second zoom stage; "2" will be displayed on the television screen three times for the third zoom stage; "3" will be displayed on the television screen Sections of the enlarged image can be shunted with the control buttons. To switch off the zoom function and return to the normal image size you press the "Zoom" button once more; "Off" will appear on the TV screen. Change the camera perspective (Angle) This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. Many films on DVD/VCD/S-VCD contain chapters which were recorded simultaneously from various camera perspectives. Films that have such chapters available allow you to observe the same chapter from various perspectives. For this, during the playback of the inserted DVD/VCD/S-VCD, you press the "Angle" button on the remote control. With each press of the "Angle" button you will be switched to one of the available camera perspectives.

Subtitle superimpose/Hide NOTE: This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. If the film on the inserted DVD/VCD/S-VCD has subtitles available then you can superimpose them onto the television screen during playback by pressing the "Subtitle" button on the remote control. With the first press of the "Subtitle" button the subtitles of the first available language are superimposed on the television screen. With each further press of the "Subtitle" button subtitles in other available languages, one after the other, will be superimposed on the television screen. The number of the currently superimposed sub title language will be superimposed on the television screen ( i.e. "1/10" for the first of ten available sub title languages). When the last of the available sub title languages has been superimposed (i.e. "10/10" for the tenth of ten available sub title languages) then you can switch off the sub title function by pressing the "Subtitle" button again. "Off" will be superimposed on the television screen. To change playback language NOTE: This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. With many films on DVD/VCD/S-VCD you can select another playback language during the playback by pressing the "Audio" button on the remote control. With the first press of the "Audio" button the first available playback language will be switched on. With each further press of the "Audio" button other available playback languages will be switched on one after the other. The current switched on playback language will be superimposed on the television screen.

- 19 -

Seite 20
Programmed play (Program) NOTE: This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. With the "Programme" function you can compile your own programme by selecting only certain chapters of an inserted DVD/VCD/S-VCD for playback. You can select the order in which the chapters are played yourself. You can compile a maximum of 16 chapters of a film for programmed play. To use the programmed play. During playback or when playback is stopped press the "PRG" button on the remote control. The program menu is displayed on the screen:

When you have programmed the desired chapter select the option "Playback" below the input field using the control buttons. Press the "OK" button. The programmed playback now starts with the chapter entered in the programme memory cell 1. Inside the programmed chapter you can skip to the start of the next or preceeding chapter by pressing the "Skip+" or "Skip-" buttons on the front panel of the DVD player or on the remote control. To delete the programmed playback press the "Stop" button on the front panel of the DVD player or on the remote control twice during playback. NOTE: If you are not sure which number a programmable title, and/ or a chapter has then you select the corresponding chapter with the "Skip+"/ "Skip-" button during playback of the film and subsequently press the "Display" button on the remote control to superimpose all the information on the inserted DVD/VCD/S-VCD onto the television screen. Here you will find, among other things, the current title as well as the chapter numbers.
On this theme see also the chapter "Superimpose disc
information" on page 20. Programming example You may enter the chapters with the numbers 03 and 10 of a film on a DVD/VCD/S-VCD for programmed playback; in this example the main film has the title number 01: In the programme menu the first title is automatically tagged. To confirm the selection press the "OK" button. The chapter of the first title now appears. Select the third chapter with the control buttons and confirm the selection with the "OK" button. The chapter will be filed on the first programme position. Select the tenth chapter with the control buttons and confirm the selection with "OK". The chapter will be filed on the second programme position. Select the option "Playback" with the control buttons below the input field. Press the "OK" button. The programmed playback now starts with chapter 3. Superimpose disc information NOTE: This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt to execute a function that is not available, the symbol is displayed on the television screen. With this function you can superimpose, during playback, on the television screen all available information pertaining to a DVD/VCD/S-VCD inserted in the DVD player.
Use the control buttons on the remote control to select the desired title. Confirm the selection by pressing the "OK" button. The chapter pertaining to the title will appear.

By pressing the "OK" button on the remote control you can select between the options "Normal" and "Random" (with VCDs/S-VCDs the option "PBC" is added). Set to "Random" and press the "Mode" button again. The "Playback Mode" menu is hidden and the random function is now switched on. To switch off the random function press the "Mode" button during playback and select the option "Normal" in the "Playback Mode" menu under the menu option "Modes" by pressing the "OK" button. When you press the "Mode" button again the random function is switched off. Repeated play With the function "Repeated Play" you can.. in respect to DVDs, optionally repeat the title or chapter of the inserted DVD. in respect to VCDs/S-VCDs individual titles and/or the entire VCD/S-VCD repeatedly playback. To switch off repeat play. Press the "Mode" button on the remote control during playback. The "Playback Mode" menu will be superimposed on the television screen: Press the control button to select the menu option "Repeat".
In respect to DVDs: By pressing the "OK" button you select between the options "Off", "Individual" and "All". Select "Individual" to repeat the currently playing chapter until repeat play is switched off or playback is stopped by pressing the "Stop" button twice. Select "All" to repeat all chapters one after the other and also the entire film until repeat play is switched off or the playback is stopped by pressing the "Stop" button twice. or Continuously press the button "Repeat" during playback until the desired option is selected: "Repeat Off", "Repeat Chapter" and "Repeat Title" appear on the television screen one after the other.
The menu option "Mode" is automatically selected first.

- 21 -

Seite 22
For VCDs/S-VCDs: By pressing the "OK" button you select between the options "Off", "Individual" and "All". Select "Individual" to repeat the currently playing title of the VCD/S-VCD until repeat play is switched off or the playback is stopped by pressing the "Stop" button twice. Select "All" to repeat the entire VCD/S-VCD until repeat play is switched off or the playback is stopped by pressing the "Stop" button twice. To switch off repeat play press the "Mode" button during playback. Select the option "Off" in the "Playback Modes" menu under the menu option "Repeat". When you press the "Mode" button again repeat play is switched off. Sequence repeat (A - B) With this function you can repeatedly playback a favourite sequence inside a chapter of the currently playing DVD/VCD/S-VCD. For this. Press the button "A - B" on the remote control during playback as soon as the beginning of the desired sequence is played back. "Rep A -" will be displayed on the television screen. Press the button "A - B" again as soon as the end of the desired sequence is played back. Take note thereby that the beginning and end of the sequence must be contained inside one chapter. The repeated playback of the selected sequence begins immediately without the necessity of pressing the "Play" button. The sequence will continue to repeat until you press the "A - B" button again in order to switch off the function. Then "Rep AB Off" will be briefly displayed on the television screen. Bookmark function During the playback of a DVD/VCD/S-VCD you can place so called "Bookmarks" in order to watch again later selected passages from a film. You can place up to three bookmarks. For this. Press the "Mark" button on the remote control during the playback of a film. On the television screen will be superimposed:

If you want to place another bookmark then press the control button to select "Bookmark 2" in the superimposed field on the television screen. Press the button "OK" again as soon as the passage is reached that you want to place the second bookmark. To place a third bookmark proceed in the same manner. When you have placed all desired bookmarks press the "Mark" button to hide the selected bookmarks on the television screen. Later if you want to skip to the passages, on which you have placed bookmarks press the "Mark" button again. Select the desired bookmark with the control buttons. Confirm the selection by pressing the "OK" button on the remote control. Playback of the selected chapter now begins automatically at the location, on which you have placed the selected bookmark. To delete placed bookmarks press the "CLR" button on the remote control To set the playback volume Press the "Vol + " button on the remote control during playback to increase playback volume or the "Vol-" to reduce playback volume. The volume variance between the values "0" (Sound off) and "16" (Maximum volume) will be superimposed on the television screen. Dimmer Press the button "Dimmer" on the remote control to reduce or increase the brightness of the DVD player's display. On the display appears Hi (bright), "NOr" (normal), "Lo" (Dark) or the display switches off. Mute playback sound (Mute) To mute the playback sound press the button "Mute" on the remote control during playback of DVDs, VCDs/S-VCDs, Audio CDs and CD-Rs/CD-RWs with MP3 or WMA data. The symbol will be displayed on the television screen. When you want to switch on the playback sound again press the button "Mute" once more. Switch off the DVD player To switch off the DVD player. If a disc inserted into the DVD player is playing you must first stop the playback by pressing the "Stop" button twice on the front panel of the DVD player or on the remote control. Open the disc tray, to remove a currently inserted disc from the DVD player, by pressing the "Open/Close" button on the front panel of the DVD player or on the remote control. After this close the disc tray again by pressing the "Open/Close" button.

As soon as the passage is reached, on which you want to place a bookmark, press the "OK" button on the remote control. The exact time position of this passage within the film will now be displayed in hours, minutes and seconds under "Bookmark 1".

- 22 -

Seite 23
Press the button "Standby" on the remote control. The DVD player now switches to the "Standby" mode. To switch the DVD player on again press the button "Standby" once more. To turn the DVD player off completely press the "ON/OFF" button on the front panel of the DVD player.
11. Playback of JPEG-Photo CD/WMA/MP3/MPEG4
Place a memory media in the DVD player. If you are using a memory card or USB stick press the "DVD/CARD/USB" button. The contents of the data carrier (CD, DVD, USB memory stick or memory card) will be displayed on the television:
Mode Select the "Mode" setting in the settings window. By pressing the "OK" button you can select between Normal, Random and Intro: - with the setting Random the files will playback in random order. - with the Intro setting 10 seconds of the MP3 data will be played back at a time. If you want to deactivate the Change Mode select the setting "Normal". Edit Mode In Edit Mode you can put together your own programme. Tag the setting "Edit Mode" by pressing the "OK" button.
The data will be listed on the left (Data window). On the upper right several settings can be implemented: "Filter", "Repeat", "Mode", "Change Mode", "Program view" and "Add to Program". On the bottom right is the preview window, in which is displayed the JPEG Image as well as its size. Select a file with the help of the control buttons. Confirm the selection by pressing the "OK" button. The file is implemented i.e. the JPEG-Photo is displayed. Filter function You can filter out designated file types in the display. Switch to the settings window with the help of the control buttons. Select "Filter" and confirm the selection with the "OK" button. You can now select which file types you want to filter out by pressing the "OK" button: Audio, Photo or Video. Press the control button to exit the settings window "Filter". Repeat function Select the repeat setting in the settings window. By pressing the "OK" button you can select between "Individual" "All" and "Off". - with the "Individual" setting the current file will be repeated until another setting is implemented. - with the setting "All" all files in the current folder will be repeated. - the setting "Off" ends the repeat function.

DVDs DVD is short for "Digital Versatile Disc". DVDs are used to store audio and video data; they exist in the sizes 8 cm and 12 cm (diameter). With a storage capacity many times greater than that of CD-Rs/CD-RWs, DVDs offer up to eight hours of playback time for the audio and video data they contain.
Remote control does not function
Check to see that the remote control batteries are inserted into the battery compartment according to the correct polarity. Check whether the batteries in the remote control are dead and replace both batteries, if necessary.

- 25 -

Seite 26
VCDs/S-VCDs With "Video CD" (VCD) and "Super Video CD" (S-VCD) two compression processes, thus space saving, are designated for storage of films on CDs. VCDs and S-VCDs exist in the sizes 8 cm and 12 cm (diameter). Their storage capacity is lower than that of DVDs. Therefore they offer only a playback duration, for the Audio and Video stored on them, of 20 minutes (8 cm format) and/or 74 minutes (12 cm format). VCDs exist in two versions: Only audio and video data can be played back on version 1.1 VCDs/S-VCDs. PBC (Playback control) functions are available on version 2.0 VCDs/S-VCDs. In addition, paused images can be displayed in high resolution. Playback Control (PBC) VCDs/S-VCDs of version 2.0 have Playback Control ("PBC"). This means that a root menu is available on the VCD/S-VCD, with which various features of the VCD/SVCD can be accessed. What are titles and chapters? Titles are the largest units of video and audio data on DVDs; with many DVDs the (Main) film has the title number 01. For bonus material (i.e. film trailers, background information etc.), that is available on many DVDs, current additional title numbers can be used. Chapters are the next smaller unit of video and audio data beneath titles. If the title or titles on a DVD/VCD/S-VCD are subdivided into chapters, they are assigned numbers that can be entered to select the chapters directly. Please note that not all DVDs are the title or titles (numbered) subdivided into chapters Are chapters also indicated as "scenes" (i.e. in the DVD's main menu) What are Scart, S-Video, Composite-Video Progressive Scan, YUV and HDMI? Scart Scart refers to a 21-pin, standardised connector over which the RGB signals, video signals and S-video signals as well as numerous control and additional signals are transmitted. S-video When the DVD player is connected to a television via S-video, the brightness and colour signals are separated; this achieves better image sharpness and less "colour noise. Colour noise refers to the overlaying of the colourful, usually highly saturated parts of a video image with irregular, variable flaw patterns.
Composite video Video signal or FBAS signal; this refers to a video signal that contains both colour and brightness information. Progressive scan Normally TV sets and Video projectors with so called "Half images" are controlled. This results in clearly visible line structures. In contrast, progressive scan refers to the supply of full images (with this DVD player at the YPbPr output), progressive scan signals can only be processed by playback devices (primarily large screen televisions, projectors) that offer this feature. The image quality is significantly better than typical video signals. YUV (component video out) YUV refers to the component signal, which is available with this device at the YPbPR output in the form of "half images"; as a rule this is the best signal for the control of large screen televisions and projectors, which can not process Progressive scan signals. As with RGB video signals, the YUV consists of three separate video signals: the brightness signal "Y" and both colour difference signals "Pb/Cb" and "Pr/Cr" Half images (interlacing) / full images (progressive scanning) A standard television image consists of 576 visible lines; first the odd then the even image lines are displayed in alternation. In other words, one half image is shown at a time. In this way, only 30 full images (60 half images) can be displayed per second. This method is referred to as "interlace" format. Contrary to this with the so called progressive or "Progressive scan" format all images are shown every time, that is to say 60 full images per second are displayed. This increases the overall quality of the image; for example paused images and text appear sharper. HDMI HDMI is short for "High Definition Multimedia Interface" and refers to a 19 contact interface for complete digital transmission of audio and video data. With its high bandwidth HDMI handles all known today home electronics digital video and audio formats. HDMI transmits audio data up to frequencys of 192 kHz with text widths of up to 24 Bit on up to 8 channels. Thus not only all of today's image and sound formats introduced into home electronics including HDTV (up to the highest present resolution of 1080i) are transmitted without loss of quality but also future formats with yet higher resolutions.