CHROMA METER

CS-100A

SPECIFICATIONS

Model Type Acceptance angle Optical system Angle of view Focusing distance Receptors Spectral response Response time Luminance units Measuring range Accuracy Repeatability Chroma Meter CS -100A SLR spot colorimeter for measuring light-source and surface luminance and chromaticity 1 85mm f/2.8 lens; SLR viewing system; flare factor less than 1.5% 9 with 1 measurement area indication 1014mm (40 in.) to infinity 3 silicon photocells filtered to detect primary stimulus values for red, green and blue light ) Closely matches CIE 1931 Standard Observer curves (x2,y, and z FAST: Sampling time: 0.1s, Time to display: 0.8 to 1.0s; SLOW: Sampling time: 0.4s, Time to display: 1.4 to 1.6s cd/m2 or fL (switchable) FAST: 0.01 to 299,000cd/m2 (0.01 to 87,530fL); SLOW: 0.01 to 49,900cd/m2 (0.01 to 14,500fL) Luminance (Y): 2% of reading 1 digit Chromaticity (x,y): 0.004 (Illuminant A measured at ambient temperature of 18 to 28C/64 to 82F) Luminance (Y): 0.2% of reading 1 digit Chromaticity (x,y) : FAST: Y 100cd/m2 or above: 0.001; 48.1 to 99.9cd/m2: 0.002; below 48.1cd/m2 : below measurement range SLOW: Y 25.0cd/m2 or above: 0.001; 12.0 to 24.9cd/m2: 0.002; below 12.0cd/m2: below measurement range (Measurement subject: Illuminant A) 1; set by measurement or numerical input Absolute color: Yxy; color difference: (Yxy) External: LCD; 3 values (Y, x, and y) of 3 digits each with additional indications Viewfinder: 3-digit LCD (showing luminance value Y) with LED backlight RS-232C; baud rate: 4800bps Measurement process can be started by external device connected to data output terminal One 9V battery; power can also be supplied via data output terminal 0 to 40C, relative humidity 85% or less (at 35C) with no condensation -20 to 55C , relative humidity 85% or less (at 35C) with no condensation 79x208x154mm (3-1/8x8-3/16x6-1/16 in.) 890g (2 lb.) without battery Lens cap; Eyepiece cap; Protective filter, ND eyepiece filter; 9V battery; Chromaticity chart; Case Specifications are subject to change without notice.
A compact, lightweight, battery-powered instrument with a 1 measurement angle for high-accuracy non-contact measurements of the luminance and chromaticity of light sources and reflective subjects
Target value Measurement modes Display Data communication External control Power source Operating temperature /humidity range Storage temperature/humidity range Dimensions Weight Standard accessories

MAIN FEATURES

MAIN APPLICATIONS
Compact and lightweight Measurements of subjects at a distance
SLR (single-lens-reflex) viewing system and flare-free optical system provide accurate measurements of subjects at a distance with virtually no influence from light outside the measurement area
Light-Source Measurements
Luminance and chromaticity of small light sources such as LEDs, miniature neon lamps, etc. Luminance and chromaticity of general light sources such as tungsten lamps, fluorescent lamps, etc. Luminance and chromaticity of traffic signals, airport guidance lights, emergency exit signs, etc.
OPTIONAL ACCESSORIES Data Processor DP-101
Compact, portable, multi-function data processor to increase the versatility of Minolta Chroma Meter CS-100A Additional Color Notations
When DP-101 is used with the CS-100A, measured values can be calculated in terms of Yxy, L*a*b*, Yu'v', color temperature, and distance from blackbody locus uv for absolute color values and in terms of (Yxy), (L*a*b*), E*ab, (Yu'v'), and u'v' for color difference.

Close-Up Lenses

Close-Up Lenses No.153 No.135 No.122 No.110 Minimum measuring area 8.0mm 5.2mm 3.2mm 1.3mm
Measurements of small subjects
1 measurement angle allows measurements of subjects as small as 14.4mm (at a subject distance of 1014mm); by using optional Close-Up Lenses, subjects as small as 1.3mm can be measured.
Reflective-Subject Measurements
Color measurements of subjects which cannot be measured by contact methods, such as distant building walls, justpainted surfaces, subjects with complicated shapes, or subjects which should not be touched for sanitary reasons.

Long Eye-Relief Eyepiece

When the Long Eye-Relief Eyepiece is used, the measuring area and measurement display inside the viewfinder can be seen with the eye 5cm (2 in.) away from the eyepiece.
Data Storage and Printout

DP-101 has memory space for up to 300 sets of measurement data and a built-in thermal printer for printing out data either at the time of measurement or from memory at a later time.
Color difference can also be measured Calibration to a user-selected reference is also possible Luminance units of cd/m2 or fL can be selected

Display Measurements

Luminance and chromaticity of color TVs and CRTs Luminance measurements of monochrome TVs and SRTs Luminance and chromaticity of projection TVs and video projectors.
Interval Timer for Automatic Measurements

Angle Finder VN

Angle Finder VN allows the measuring area and measurement display inside the viewfinder to be seen at an angle of 90 to the normal viewfinder optical axis. Angle Finder VN can also be focused and the magnification can be set to 1x or 2x.
Type Measurement modes Chromatic systems Battery-powered multi-function data processor for use with Konica Minolta Chroma Meter CS-100A Absolute and difference Absolute color: Yxy, Yu'v', L*a*b*, color temperature, distance from blackbody locus uv Color difference: (Yxy), (Yu'v'), u'v', (L*a*b*), E*ab (4 for each calibration channel and 1quick-input temporary target-color channel); set by measurement or numerical input Space for 300 sets of measurement data divisible into 16 pages; built-in NiCd battery for backup maintains data in memory even if POWER switch is set to OFF 16-character x 2-line dot-matrix LCD with adjustable viewing angle 24-character thermal-dot Maximum, minimum, mean, and standard deviation Timer interval user-selectable from 3s to 99m RS-232C format; transmission rate: 9600 baud (can be set by service personnel to 600, 1200, 2400, or 4800; output voltage: CMOS 5V; RS-232C terminal uses DIN 8-pin connector) Multiple-measurement-averaging mode; remote-control socket; can supply to CS-100A 6 AA-size batteries or included AC Adapter 220x50x200mm (8-11/16x2x7-7/8 in.) 1300g (2.87 lb.) not including batteries Data Cable DP-A12; AC Adapter AC-A11; thermal paper (one roll); DIN 8-pin plug (1); 3.5mm (1/8-inch) subminiature plug; Shoulder Case DP-A30
Calibration channels Target color channels
SYSTEM DIAGRAM (Optional Accessories)
EASY-TO-READ DISPLAY Viewfinder Image
Measuring area (1) Field of view (9) Measured luminance (cd/m 2 or fL)

Data memory

Long Eye-Relief Eyepiece Close-Up Lenses

Display Printer Statistical calculations Interval timer Data communication
No. 153 No. 135 No. 122 No. 110

Connecting Cable

Data Cable DP-A12
(Included with Data Processor DP-101 as a standard accessory)

LS-A12

White Calibration Plate (for 45-0 / for d-0)

External display

Measured value Measurement mode
Power source Dimensions Weight Standard accessories

Data Processor DP-101

Specifications are subject to change without notice. 11 12

SAFETY PRECAUTIONS

To ensure correct use of the instrument, please adhere to the following. Before using the instrument, be sure to read the instruction manual. Always use the specified power. Use of inappropriate power may result in afire or electric shock.

CERTIFIED

The manufacturing center of Konica Minolta Sensing Inc. (Location: Aichi Pref., Japan) was approved by the British certification organization Lloyds Register Quality Assurance for certification under the ISO 9001: 1994 international quality management system standards on March 3, 1995. Since its establishment in 1990, the center has carried out the development and production of precision instruments and associated application software for the measurement of color, light, and shape. Certification was awarded to the centers quality management system, including design, manufacturer, management of manufacture, calibration and servicing.Certification was carried over to the ISO 9001: 2000 standards in February, 2003.
3-91, Daisennishimachi, Sakai.Osaka 590-8551, Japan Konica Minolta Photo Imaging U.S.A., Inc. Konica Minolta Photo Imaging Canada, Inc. Konica Minolta Photo Imaging Europe GmbH Konica Minolta Photo Imaging France S.A.S. Konica Minolta Photo Imaging UK Ltd. Konica Minolta Photo Imaging Austria GmbH Konica Minolta Photo Imaging Benelux B.V. Konica Minolta Photo Imaging (Schweiz)AG Konica Minolta Business Solutions Italia S.p.A. Konica Minolta Photo Imaging Svenska AB Konica Minolta Photo Imaging (HK)Ltd. Shanghai Office Konica Minolta Photo Imaging Asia HQ Pte Ltd. KONICA MINOLTA SENSING, INC. Seoul Office 725 Darlington Avenue, Mahwah, NJ 07430, U.S.A. Phone: 888-473-2656 (in USA), 201-529-6060 (outside USA) FAX: 201-529-Meyerside Drive,Mississauga, Ontario L5T 1C9, Canada Phone: 905-670-7722 FAX: 905-795-8234 Europaallee 17, 30855 Langenhagen, Germany Phone: 0511-740440 FAX: 0511-741050 Paris Nord II, 385, rue de la Belle-Etoile, B.P. 50077, F-95948 Roissy C.D.G. Cedex, France Phone: 01-49386550 / 01-30866161 FAX: 01-48638069 / 01-30866280 Precedent Drive, Rooksley Park, Milton Keynes United Kingdom Phone: 01-908200400 FAX: 01-908618662 Amalienstrasse 59-61, 1131 Vienna, Austria Phone: 01-87882-430 FAX: 01-87882-431 Postbus 6000, 3600 HA Maarssen, The Netherlands Phone: 030-2470860 FAX: 030-2470861 Riedstrasse 6, 8953 Dietikon, Switzerland Phone: 01-7403727 FAX: 01-7422350 Via Stephenson 37, 20157, Milano, Italy Phone: 02-39011-1 FAX: 02-39011-219 Solnastrandvgen 3, P.O.Box 9058 S-17109, Solna, Sweden Phone: 08-627-7650 FAX: 08-627-7685 Room 1818, Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong Phone: 852-34137508 FAX: 852-34137509 Rm 1211, Ruijin Building No.205 Maoming Road (S) Shanghai 20020, China Phone: 021-64720496 FAX: 021-64720214 10, Teban Gardens Crescent, Singapore 608923 Phone: +65 6563-5533 FAX: +65 6560-9721 801, Chung-Jin Bldg., 475-22, BangBae-Dong, Seocho-ku, Seoul, Korea Phone: 02-523-9726 FAX: 02-523-9729