URGENT - IMPORTANT INFORMATION
This bulletin is being reissued to provide corrected information regarding the serial number cut-ins for the Charging Corona Soilage Kit #2 (p/n 26NA-K020FOC) and to announce that the Model 7035 EPROM has been upgraded to level 17.0. The initial release of the bulletin contained serial numbers that were already modified during production. As a result, some dealers may have ordered more of the kit than they actually require. To prevent unnecessary installation of kits that have already arrived at your location, refer to the revised serial number table in this bulletin to re-verify the correct number of modification kits required for your field base. Please return any excess kits to Konica Business Technologies via UPS Ground and ship Freight Collect charging Account Number 4R50A7. The return shipping location is: Konica Business Technologies Parts Center Attention: Mod Kit returns 5701 Skylab Road Huntington Beach, CA 92647 We apologize for any confusion that this may have caused. Thank you for your support and cooperation.

PRODUCT:

7020/7025/7030/7035

12/11/01

Supersedes bulletin #9, dated 11/16/01.
The bulletin is being reissued to correct information regarding the serial number cut-ins for the charging corona soilage kit #2. Please refer to the serial number tables in this bulletin. The image EPROM level for the model 7035 has also been upgraded to level 17.0.

SUBJECT:

MODIFICATION KITS

Mo d i f i c a t i o n

k i t s a r e a v a i l a b l e t o e n h a n c e t h e o p e r a t i o n o f m o d e l s , , , a n d 3 5. T h e s e k i t s p r o v i d e t h e f o l l o w ing corrections: E lim ination of toner packing in recycle unit. Reduction of toner m istin g. P r e v e n t i o n o f A D U claw b r e a k a g e.
S e r i a l n u m b e r i n f o r m a t i o n a n d m o d i f i c a t i o n k i t c o n t e n t s a r e p r o v i d e d i n t h i s b u l l e t i n. P lease n o t e t h a t m a c h i n e s m u st have the follow i n g E P R O M levels installed before the m o d ification k its are installed.
Model System control EPROM Level 32.0 Level 32.0 Level 32.0 Level 32.0 Image control EPROM (type 1 & type 2) Level 31.0 Level 31.0 Level 31.0 Level 17.0
T h r o u g h M a y 1 , , t h e s e k i t s c a n b e o b t a i n e d f r o m t h e P a r t s D istribution C e n t e r free of c h a r g e for 0 % of the m a c h i n e s w i t h i n t h e a f f e c t e d s e r i a l n u m b e r r a n g e u s i n g t h e s p e c i a l K o n i N e t o r d e r i n g p r o c e d u r e s p r o v i d e d i n t h i s b u l l e t i n. F o r y o u r c o n v e n i e n c e a n d t o e n a b l e rapid i m p l e m e n t a t i o n o f t h e s e m o d ification s , t h i s p r o g r a m w ill be adm i n i s t e r e d v i a o u r K o n i N e t s p a r e parts order entry system.
DESCRIPTION Charging corona soilage kit #1 Charging corona soilage kit #2 ADU claw damage kit Toner packing kit * Prices are subject to change without notice.
PART NO. 26NA-K010FOC 26NA-K020FOC 26NA-K030FOC 26NA-K040FOC
DEALER UNIT COST* N/C N/C N/C N/C

Page 1 of 6

Bulletin #9A (12/11/01)
SPECIAL ORDERING PROCEDURE
Use the Order Planning Table provided below to determ ine the number of kits necessary for the affected M o d e l s , , a n d 3 5. C o m p a r e y o u r s e r i a l n u m b e r s t o t h e " A f f e c t e d S e r i a l Number Range" shown in the table to establish the total number of your m a chines that will require the upgrade. E n ter this value in the "Total Affected M IF" colum n. P r e v i o u s l y , s o m e k its h a v e b e e n s h i p p e d t o f i e l d s i t e s i d e n t i f i e d t h r o u g h c o n t a c t w ith t h e Technical Support Hotline. If you had already received a quantity of these kits from these special s h i p m e n t s , s i m p l y r e c o r d t h e n u m b e r i n t h e L e s s # K its A l r e a d y R e c e i v e d colum n a n d s u b t r a c t t h i s a m o u n t f r o m y o u r T o t a l A f f e c t e d M IF figure to establish the final "# of K its R e q u i r e d " quantity. N o t e : T h e n u m b e r o f k i t s o r d e r e d w ill b e c o m p a r e d t o o u r r e c o r d s o f y o u r s h i p p e d u n i t s a n d y o u w ill b e c o n t a c t e d i f s i g n i f i c a n t d i s c r e p a n c i e s a r e n o t e d. P l e a s e r e t a i n y o u r w o r k s h e e t a n d backup records should reconciliation be necessary.

Company: ________________________________ Model 7030 Affected Serial Number Range 26NE0000126NE07234 26PE0000126PE00457 26NE0723526NE11635 26PE0045826PE05823 26NE0000126NE22066 26SE0000126SE03220 26PE0000126PE11668 26TE0000126TE03100 26NE0000126NE22066 26SE0000126SE03220 26PE0000126PE11668 Preparer: _________________________________________ Less # of Kits Already Received
Part Number 26NA-K010FOC Charge corona kit #1 " 26NA-K020FOC Charge corona kit #2 " 26NA-K030FOC ADU claw kit " " " 26NA-K040FOC Toner packing kit " "

Total Affected MIF

# of Kits Required
N o t e : F o r m o d e l s a n d , th e s e r i a l n u m b e r r a n g e a lso includes m a c h ines w ith a 26QE- prefix for the 7020 and a 26RE- prefix for the 7030.
N e x t , s i m p l y p r o c e e d t o K o n i N e t t o p r o c e s s y o u r o r d e r a s i f i t w e r e a n o r m a l s p a r e p a r t s o r d er. S i g n o n a n d s e l e c t A p p lication s , t h e n L i n e O r d e r E n t r y. E n s u r i n g t h a t y o u h a v e s e l e c t e d y o u r Parts contract, apply your PO control number and proceed to enter the appropriate number of m o d ification k i t s b y i n d i v i d u a l p a r t n u m b e r. Y o u m a y s e lect either R o u t i n e o r E m e r g e n c y O r d e r a n d a n y s h i p p i n g s e r v i c e l e v e l b a s e d o n t h e u r g e n c y o f y o u r i n d i v i d u a l n e e d s. W h ile there is no charge for the kits, all applicable charg e s for shipping and Emergency Order service fees will apply.

Page 2 of 6

Y o u m a y e n t e r m o r e t h a n o n e o r d e r a n d s h i p t o d i f f e r e n t d e s t i n a t i o n s a s l o n g a s t h e t o t a l q u antity o r d e r e d d o e s n o t e x c e e d t h e n u m b e r o f a f f e c t e d m a c h i n e s t h a t y o u a r e s u p p o r t i n g a n d e l i g i b le to receive. Orders will be processed on a first-in, first-out basis and shipped prom p tly to the requested destinations.
S e r i a l n u m b e r r a n g e s a r e l i s t e d b e l o w a n d k it contents are listed on the follow i n g p a g e s.
Serial Number Range Table
Kit # 26NA-K010FOC Charge corona kit #1 Model 7030 26NA-K020FOC Charge corona kit #26NA-K030FOC ADU claw kit 26NA-K040FOC Toner packing kit 7030 Serial Number Range 26NE00001 to 26NE07234 All machines are modified. 26PE00001 to 26PE00457 26NE07235 to 26NE11635 All machines are modified. 26PE00458 to 26PE5823 26NE00001 to 26NE22066 26SE00001 to 26SE03220 26PE00001 to 26PE11668 26TE00001 to 26TE03100 26NE00001 to 26NE22066 26SE00001 to 26SE03220 26PE00001 to 26PE11668

Page 3 of 6

Charging Corona Soilage Countermeasure Kits 1 and 2: Models 7020 and 7030
T h is provides a countermeasure against the soiling of the charging corona that results from toner spilling inside the m a c h i n e. T h e r e a r e t w o k i t s b e c a u s e s o m e o f t h e m o d ification p a r t s h a v e a l r e a d y b e e n i n s t a l l e d i n s o m e m a c h ines (refer to serial num b e r r a n g e t a b l e ).
These parts have been abolished # Developing cover assembly (Kit #1)
B Developing cover part/A assembly (Kit #1 & 2)
Developing seal/T (Kit #1)
Developing seal/U (Kit #1)

View A

View B
# These parts were abolished on m a chines after the serial number range listed in the table. T he abolishment of these parts has nothing to do with the machines operations. The size of the o p e n i n g i n t h e c o v e r w a s c h a n g e d ; this is th e m o d ification. Note: The 2 screws that attach the developing cover assem b ly (p/n 26N A -6062) to the developing unit are no longer needed. The 2 plastic hooks are all that is needed to secure the developing cover assem b ly to the developing unit.

Kit #1

26NA-K010FOC Description Developing cover assembly Developing seal T Developing cover part/A assembly Developing seal U Part Number 26NA-3062 26NA30980 26NA-3050 26NA30990 Quantity 1 1

Page 4 of 6

Kit #2
26NA-K020FOC Description Developing cover part A/assembly Part Number 26NA-3050 Quantity 1
ADU Claw Damage Countermeasure Kit: Models 7020, 7025, 7030, and 7035
T h i s p r o v i d e s a c o u n t e r m e a s u r e a g a i n s t A D U lock claw b r e a k a g e o n t h e r i g h t d o o r.
ADU lock claw ADU cover ADU reinforce stay/front Lock part

Front part of main frame

ADU lock claw
26NA-K030FOC Description ADU lock claw Lock part Part Number 26NA50963 26NA10181 Quantity 2 2
Toner Packing Countermeasure Kit: Models 7020, 7025, and 7030
T h i s p r o v i d e s a c o u n t e r m e a s u r e a g a i n s t n o i s e a n d d a m a g e i n t h e t o n e r r e c y c l e u n i t w h ich r e s u lts from t o n e r p a c k i n g. I n s t a l l a t i o n i n s t r u c t i o n s a r e i n c l u d e d w ith this bulletin.
26NA-K040FOC Description Screw guide part/rear assembly Collect cover/C assembly Agitating plate/A Toner conveyance gear/1 Spewing PV sheet/B Part Number 26TA-2050 26TA-2270 26TA21510 26TA21460 26TA21610 Quantity 1

Page 5 of 6

SCAN GLASS CLEANING
I n a d d i t i o n t o t h e p r e v i o u s l y m e n t i o n e d m o d ification k its, K o n i c a h i g h l y r e c o m m e n d s t h a t y ou clean the scan glass and platen glass with a few drops of R a in-X. This will prevent the scan glass from g e t t i n g d i r t y a n d t h u s p r o d u c i n g l i n e s o n c o p i e s. T h i s p r o c e d u r e s h o u l d b e p e r f o r m e d at every service call.

242-15

Corporate Publishing Services

Page 6 of 6

TONER PACKING COUNTERMEASURE INSTALLATION Preliminary Installation Instructions
B e fore installing the T o n e r P a c k i n g C o u n t e r m e a s u r e K it , rem o v e t h e 4 s t a r r e d ( * ) item s (sh o w n in the illustra tion) from the collect cover/C a s s e m b l y.

Collect cover/C assembly

Toner Packing Countermeasure Kit Installation
1. Parts to be used Screw guide/rear assy Collection cover/C assy Agitator plate/A

Notch: new style part

Toner conveyance gear/1

Spewing PV sheet/B

E-ring & screw
Save! Not included with kit.
2. Procedure 1. Remove cartridge rail.
2. Remove pulley, belt, and shaft holder.
3. Remove screw guide/rear assy

Note: Save e-ring.

4. Remove agitator plate.
5. Install new agitator plate
Install the plate as shown in the photo so that it is vertical to the shaft. Use flat-headed screw (M2 X 2).

Note: Save screw.

6. Ensure that seal is attached.

Ring-shape seal

7. Install new screw guide/rear assy

8. Install new gear

9. Secure gear with E-ring.
Turn the boss so that it faces inside of machine.
* Ensure that all 3 agitator plates are vertical.
10. Adjust the phases of agitator plates and PET and then install the collection cover assy. * Install the PET towards agitator plates so that the PET will appear on the right side of the photo.
11. Attach toner spewing PV sheet.
Ensure that the sheet is attached securely.
Attach the sheet in Lshape on this surface.
12. Install cartridge rail.

Wo r k g r o u p D o c u m e n t S y s t e m

Versatility you can use.

Think of the Konica 7035 as a onesystem solution for all your document production needs. As a 35-ppm printer, copier, scanner and fax its loaded with the kind of features that busy workgroups and low-volume depart m e n t s usually have to make do without. Features like Job Reserve/Dual Access, which allows users to store up to five copy jobs for true multi-functionality. The Konica 7035 even features an innovative polymer-based toner system for sharper, clean images and enhanced resolution. Of fering a wide variety of paper-source, finishing and serv e r options, the Konica 7035 is f lexible, so you can tailor it to meet the particular needs of your organization. All in all the Konica 7035 is versatility you can use.

7035 Highlights

35 ppm Printing/Copying 600 x 600 dpi Resolution Standard Stackless Duplex Konica SPHERICA Toner Imaging Technology GUI Print Driver with PC Faxing and Password Print Support M M PLC5e Print Controller with 10/100BaseT Network Card* True Adobe PostScript 3 * Network Scanning*

*Optional

Features
Integrated Printing, Copying, Scanning, Faxing
KONICA 7035 SPECIFICAT I O N S
Configuration Speed First Copy Resolution Standard Memory/Maximum Memory Reduction/Enlargement Continuous Copying Maximum Original Size Average Monthly Page Volume Maximum Monthly Page Volume Paper Handling Standard Input Capacity Min. - Max. Paper Size Min. - Max. Paper Weights Drawer Base Options DB-209 DB-409 Max. Paper Capacity (w/opt. LCT) Automatic Duplex Finisher Options Total Finisher Capacity 2 Tray Option (FS-107) 3 Tray Option (FT-107) 4 Tray Option (FT-107) Console with stationary platen 35 cpm (8.5"x 11"); 16 cpm (11"x 17") 4.8 seconds 600 x 600 dpi 32 MB/288 MB 25% to 400% 1-999 11"x 17" 30,000 - 45,000 Pages 100,000 Pages 2 x 500 Sheets (universal), Multi by-pass 50 Sheets 5.5"x 8.5"/11"x 17" 16-32lbs 2 x 500 Sheets (universal) 1 x 1,500 Sheets (8.5"x 11") 2,550 Sheets Standard/Stackless 1,100 Sheets 100 + 1,000 = 1,100 Sheets 100 + 100 + 600 = 800 Sheets 100 x 4 = 400 Sheets

FEAT U R E S

Konicas powerful digital-engine technology delivers high-perf o rmance multi-functionality ideal for high-volume workgroups and midsize depart m e n t s.

Touch Screen Controls

The easy-to-use, intuitive interface guides users through all basic machine functions and provides detailed access to advanced copy and fa x f e a t u res. The touch screen controls also provide unique print-driver applications such as Stamp and Wa t e rmark.

Modular Design

W ith several paper-source, finishing and print controller options to choose from, the Konica 7035 is engineered to provide a multi-functional solution for growing o rganizations now and in the future. Stapling/Sorting Finisher option gives users multi-position stapling.
Innovative Polymer-based Toner Technology
B reakthrough toner technology off e r s superb image quality, and excellent gradation and sharpness.
Job Memory, OHP Interleave, Image Shift, Frame/Fold Erasure, ECM, APS, AMS, ATS, Book Copy, Stamp/Watermark
PRINTER SPECIFICAT I O N S

Inner Exit Tray (IT-101)

Two non-sorting trays integrated into the machine base allow users to conveniently direct print jobs to one tray and copy jobs to the other. Overall capacity i s 150 sheets.

Type Speed Resolution Memory Network Card Printer Drivers Options

Super G3 Fax Kit

Transmits at twice the speed of regular G3 faxes (less than 2 seconds per page). Options allow for memory expansion, b roadcast and group faxing capabilities.
Windows Controller (IP-011)*
Compatibility/Compression Standard Memory Resolution PC Fax Support Modem Speed One Touch Keys
Optional Print Controller (IP-011) 100 MHz Procesor 35 ppm 600 x 600 dpi 16 MB standard/80 MB Max. KN-304 10/100 BaseT W indows 95/98, NT 4.0 MU-MB MU-MB NIC Card KN-304

FAX SPECIFICAT I O N S

Optional PLC Print Controller (IP-421) with 166 MHz Processor 35 ppm 600 x 600 dpi 32 MB/160 MB KN-303 10/100 BaseT Windows 95/98, NT 4.0, Macintosh 9.x Hard Disk Drive, Adobe PS 3 Kit NIC Card KN-303; MU-MB MU-MB; MU-MB
Low-cost, embedded controller option for printing in a Windows-based environment. O ffers real-time printer diagnostics.
PCL5e Controller (IP-421)*
The IP-421 Print Controller supports more demanding applications (Adobe PostScript option available), including network scanning, and is based on Konicas New Open A rchitecture, a platform for seamless capability upgrades.
All specifications are approximate and subject to change. All names are trademarks or registered trademarks of their respective companies.
ITU Group 3 with ECM, T.30, V34 & V.8, Super GMB, Max. 16 MB 200 x 200 dpi/400 x 400 dpi Yes with IP-421 & KN-303 card 33.6 Kbps 20
DIMENSIONS, WEIGHTS & YIELDS
Machine Weight Main Body Dimensions w/Document Feeder Electrical Requirements Drum/Developer Yield Toner Yield
159 lbs 17" W x 23.4" D x 34.4" H 120V, 60Hz 200,000/200,000 26,000
KONICA BUSINESS TECHNOLOGIES, INC.
w ww.konicabt.com K B T-01-3
2001 Konica Business Technologies, Inc.

Printed in U.S.A.