Feed Component Guide
for Konica Minolta Office Equipment
This guide is designed to help you order high quality, cost-effective Katun feed components for the Toshiba office equipment listed below. You can identify the correct Katun part number for a particular feed component in either of two ways: 1. Cross-reference Katun part numbers with the OEM part number for a given feed component. 2. Locate the feed component in the appropriate machine illustration and then reference its identification letter in the product listing. All Katun feed components are sold tire only unless otherwise noted.

Konica Minolta

4155 Di 450 Di 7155 ColorFORCE 8050 Bizhub PRO C500

Page Number

Katun feed components are sold tire only unless otherwise noted. For the most current feed component cross-reference information, visit www.katun.com/resourcecenter/feedcompguide.html
For the most current feed component cross-reference information, visit www.katun.com/resourcecenter/feedcompguide.html
Installing Katun Feed Tires? Proper Installation Ensures Excellent Performance
Most "crepe-style" (textured surface) Katun tire-only feed tires are imprinted with a directional arrow or mark. When installing, it is essential that the imprinted arrow points in the direction of required tire rotation. In certain machine applications, this may mean that the side for the tire that bears the imprinted arrow faces toward the technician; in other applications, the arrow side may face toward the rear of the machine.

Feed Roller

Directional Arrow Pickup Roller
Paper Paper Feed Direction

Separation Roller

Feed Component Care Tips
Keep bags sealed tightly until feed components will be installed. Store feed components in a cool, dry, and dark location. Clean feed components ONLY with soap and warm water.
Katun feed components are sold tire only unless otherwise noted.
Konica Minolta 4155 (with AD-304, DF-306, LT-251)
Description A B C D E F G H I Pickup Tire Feed Tire Double Feed Prevention Roller Reverse Roller Double Feed Prevention Roller Original Feed Tire Pickup Tire Feed Tire Double Feed Prevention Roller OEM PN 25BA40320 4024-1030-5400-12ER40313 12ER40341 25BA40320 4024-1030-5400-4301 Katun PN

H I G H I

Konica Minolta Di 450 (with PF-115, PF-208)
Description A B C Pickup Roller Feed Roller (with hub assembly) Bypass Upper Separation Roller (with hub assembly) OEM PN 4002-3201-01 4002-3216-01 1136-0162-01 Katun PN
Konica Minolta Di 620 (with C-304, EDH-1)
Description A B C D Pickup/Feed Roller (with hub assembly) Pickup/Feed Roller Original Pickup Roller (with hub assembly) Original Feed Roller (with hub assembly) OEM PN 1075-3051-01 1075-3051-01 4469-3503-01 4469-3504-01 Katun PN

26224 25702

A B A B A B A B
Konica Minolta 7020 (with DB-209/409)
Description A A B C D E Bypass Pickup Tire Bypass Pickup Roller Feed Tire Feed Tire Double Feed Prevention Tire Double Feed Prevention Tire OEM PN 25BA40320 26NA-26NA40090 26NA40110 26NA40120 Katun PN

22793 22794

D C E D C E

Konica Minolta 7022

Description A B C D E Double Feed Prevention Tire Double Feed Prevention Tire Feed Tire Pickup Tire Feed Tire OEM PN 26NA40110 26NA40120 26NA40090 25BAKatun PN

A C B A C B

Konica Minolta 7040 (with DB-208, DB-608, DF-311)
Description A B C D E Pickup Tire Feed Tire Feed Guide Plate (Upper) Separation Pad Assembly Pickup/Feed Roller (with hub assembly) OEM PN 25BA40AA40132 120A-4580 120A45820 Katun PN
Konica Minolta 7050 (with DF-306)
Description A B B C D E F Pickup Tire Double Feed Prevention Roller Feed Tire Feed Tire Double Feed Prevention Tire Original Feed Tire Double Feed Prevention Roller OEM PN 25BA40320 5400-25AA40011 25SA40960 12ER40341 12ER40313 Katun PN

A B C D C D C D C D

Konica Minolta 7075 (with DF-313, EDH-2, LT-401/411, C-305, FN-4/104, FS-108)
Description A B C D E F Feed/Double Feed Prevention Roller Assy Feed Roller Assembly (with hub assembly) Auxiliary Pickup Roller Original Pickup Roller Original Feed Roller Exit Roller OEM PN 55VA-4830 55VA-4840 4014-1443-01 4014-1446-01 4014-1447-01 122H48251 Katun PN

23397 22977

F F A B
Konica Minolta 7155 (with C-403/404, LT-402/412, FN-6/112/113, FS-110/210)

Normal Exit.... 7-16 Alternate Exit.... 7-17 Face Up Exit.... 7-19

Section 8: Applications

Application Function Menu... 8-2 Sheet/Cover Insertion... 8-3 Chapter.... 8-8 Combination.... 8-10

Booklet.... 8-12

Transparency Interleave.... 8-14 Image Insert.... 8-16 Book Copy.... 8-18 Mixed Original... 8-20 Text/Photo Enhance.... 8-22 Reverse Image.... 8-24 Repeat.... 8-25 Frame/Fold Erasure.... 8-27 AUTO Layout.... 8-29 Thin/Thick Paper.... 8-31 Image Shift... 8-32 Non-Image Area Erase... 8-35

Section 9: Job Memory

Job Store... 9-2 Job Recall.... 9-4 Job Memory Form.... 9-5
Section 10: Key Operator Mode
To the Key Operator.... 10-2
How to Access the Key Operator Mode... 10-3
Function Menu Map.... 10-4 System Initial.... 10-6
Time..... 10-6 Language.... 10-7 Output Tray.... 10-8 Copier Initial.... 10-9 Copy Mode.... 10-10 Density.... 10-11 Magnification... 10-12 Tray.... 10-13 Output..... 10-14 Image Quality.... 10-16 Preset Key.... 10-17 Density.... 10-17 Magnification... 10-19 ECM (Electronic Copy Monitor)... 10-20 How to Access the ECM Setting Mode... 10-21 Change ECM Data.... 10-22 ECM Data List.... 10-25 All Counter Reset... 10-27 ECM On/Off Setting.... 10-28 Copy Limit Reached Effect... 10-29 Lock Job Memory... 10-30 Paper Type.... 10-31 Panel Contrast.... 10-32 Key Operator Data.... 10-33 Weekly Timer.... 10-34 How to Access the Weekly Timer Setting Mode.. 10-35 Weekly Timer Setting... 10-36 Weekly Timer Copier ON/OFF Time Set.. 10-37 Machine Working Day Individual Set... 10-39 Lunch Hour Off Function... 10-41 Password Setting... 10-43 Touch Panel Adjustment... 10-44 Paper Size.... 10-45 Power Save.... 10-46 Memory Switch.... 10-48
Section 10: Key Operator Mode (continued)
List Print.... 10-53 KRDS Host.... 10-54 Key Operator ECM Form... 10-56
Section 11: Maintenance & Supplies

Loading Paper... 11-2

Add Paper Indicator.... 11-2 Using the HELP Key... 11-2 Tray Error Indicator (!)... 11-2 Loading Paper in Universal Tray... 11-3 Programming Copy Size of Universal Tray... 11-4 To Display Universal Tray Size Selection Screen.. 11-4 Loading Paper in LCT (Large Capacity Tray).. 11-5 Adding Toner.... 11-6 Inserting a New Staple Cartridge... 11-7 Preventive Maintenance... 11-8 Reading the PM Count and Total Count... 11-8 Cleaning the Left Partition Glass... 11-9 Cleaning the Document Glass and Cover... 11-9 Service, Repairs, Supplies.... 11-10
Section 12: Troubleshooting
Call for Service.... 12-2
Limited Use of the Copier in Trouble... 12-3

Memory Overflow... 12-4

Paper in Main Body Trays Paper in Multi-Sheet Bypass Tray Paper in Automatic Duplex Unit Paper in Finisher Paper Weight Compatibility Chart

Paper Information 4-1

Paper Information
Use the platen glass when originals are not suitable for use with the document feeder, e.g., when size is incompatible, or when originals are folded, stapled, torn, or in generally poor condition. When copying from the platen glass, Automatic Paper Selection (APS) operates unless the setting is changed by the key operator. Specifications
All capacities are stated for 20 lb bond paper Max. original size: 11"x17" (280mmx432mm), sheet or book Max. book weight/thickness: 15 lb [6.8kg]/1.2" [30mm] Original placement: Face down on glass and centered along left side Orientation (portrait-landscape): Same as copy paper
1 Raise the document cover, as shown in the illustration below. 2 Place original FACE DOWN along the left measuring guide. 3 Gently close the document cover, to prevent the original from shifting on the glass.
TIP: To eliminate black copy marks on edges when copying from a book without selecting Book Copy mode, select Frame/Fold Erasure or Non-image Area Erase in Application mode. If the book does not completely cover the platen glass, or if the document cover cannot be completely closed, place white paper over exposed glass to reduce toner consumption.

4-2 Paper Information

Specifications
All capacities are stated for 20 lb bond paper Max. RADF tray capacity: 50 sheets Max. original exit tray capacity: 50 sheets Original size range: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", 5.5"x8.5"R, A4 (280mm x 432mm~140mm x 216mm) [See note.] Original placement: Face up; orientation same as copy paper Orientation (portrait-landscape): Same as copy paper feeding direction Original weight: 16 lb~32 lb (no special stock) Curling tolerance/stack height: 10mm or less/20mm or less
ADF MODE 1-1, 1-2 Original size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", 5.5"x8.5"R, A4 Max. feeder capacity: 50 original sheets RADF MODE 2-2, 2-1 Original size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", 5.5"x8.5"R, A4 Max. feeder capacity: 50 original sheets MIXED SIZE ORIGINAL MODE Original size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", 5.5"x8.5"R mixed. Mixed feeder capacity: 50 original sheets Unsuitable RADF Originals

Paper Information 4-5

Paper in Main Body Trays
Paper Weight: 16 lb~24 lb Total Paper Capacity Main body with DB-208: 2,100 sheets, including 100-sheet Multi-Sheet Bypass
Tray 1~4: 500 sheets 20lb/ user-adjustable to any standard size from 11"x17"~5.5"x8.5"
Main body with DB-608: 2,600 sheets, including 100-sheet Multi-Sheet Bypass
Tray 1, 2: 500 sheets 20lb/ user-adjustable to any standard size from 11"x17"~5.5"x8.5" Tray 3: 1,500 sheets 20lb/ fixed to 8.5"x11", 8.5"x11"R or A4R (service adjustable)
Paper in Multi-Sheet Bypass Tray
Paper Size: Adjustable from 11"x17"~5.5"x8.5"R Paper Weight: 16 lb~32 lb; Special (transparency films, labels, hole punch, rag content) Multi-Sheet Bypass Tray Capacity: 100 sheets 20 lb stacked: single feed special stock
Paper in Automatic Duplex Unit
Paper Size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", or 5.5"x8.5"R Paper Weight: 20 lb~24 lb Duplex Tray Capacity: Unlimited stackless duplex tray
NOTE: Reliability and copy quality are not guaranteed for all Special papers. Use only paper that is recommended by Konica. 4-6 Paper Information

Paper in Finisher

The In-Bin Stapler Finisher handles Ledger (11"x17"), Letter/R (11"x8.5"/8.5"x11") and Invoice/R (8.5"x5.5"/5.5"x8.5"). Invoice (5.5"x8.5") size can be output with one staple but not two staples. FS-105 In-Bin Stapler Finisher (capacities at 20lb, unless otherwise indicated) Non-sort mode Finisher upper tray: 100 sheets (11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5"R, A4R, A4) 10 sheets (thin/thick paper, transparency film, etc.) Finisher middle/lower tray: 500 sheets (8.5"x11", 8.5"x11"R, A4R, A4) 300 sheets (11"x17", 8.5"x14", 5.5"x8.5"R) Sort/Group/Staple-sort mode: Finisher middle/lower tray: 500 sheets (8.5"x11", 8.5"x11"R, A4R, A4) 300 sheets (11"x17", 8.5"x14", 5.5"x8.5"R) Paper Exit Switching Function of Finisher Tray When the amount of copies delivered onto the Finisher tray (upper, middle or lower) exceeds its limit described below, the copier automatically shifts the output to another tray to complete the output job. Finisher upper tray: After 100 sheets (irrespective of the paper size) delivery, the output shifts to the middle, then lower tray. Finisher middle tray: After 300 sheets (11"x17" or 8.5"x14", 5.5"x8.5")/500 sheets (8.5"x11" or A4) delivery, the output shifts to the lower tray. Finisher lower tray: After 300 sheets (11"x17" or 8.5"x14", 5.5"x8.5")/500 sheets (8.5"x11" or A4) delivery, the output shifts to the middle tray. The 7040 copier defaults to this Paper Exit Switching function. If you desire to release this function, contact your service representative.

Copy Size Quality (High, Very High)

High Mode Very High Mode

Reserve
Set Reserve Job Job List Screen Mishandled Paper During Reserve Setting When Paper is Depleted for the Job in Progress

Memory Copy

Platen Memory Copy RADF Memory Copy

Rotation

Rotation and APS Rotation and AMS To Release Automatic Rotation
Check Mode and Proof Copy Interrupt Mode Help Mode Using the Multi-Sheet Bypass Tray

Basic Operations 6-1

Basic Operations
The Basic Screen displays after warm-up, when power is turned on; when Auto Power Saver mode is activated; when ECM password is set; when Memory card or Key counter is used; or when Auto/Reset mode is manually or automatically restored. All copying selections can be initiated from the Basic Screen, whether selected with screen keys, or conventional keys, i.e., Application, Output, and Job Memory. When the Electronic Copy Monitor (ECM) is activated, a valid 5-digit ECM password, assigned by the key operator, must be entered before copying can be performed. See p. 5-4. If a Key Counter is required, the message Please insert key counter is displayed. Insert a Key Counter. All of the settings in the Basic Screen, except Print Quantity, can be changed by the key operator in the Initial Setting Menu Screen.
*: The following icons will be displayed in the icon area. Quality key Job list key Scan key Basic Screen Messages and Copier Status Icon area* Folder keys Output quantity/ Enter quantity display Memory indicator Settings Options
Basic Mode keys Add toner icon, Preventive maintenance icon, Staple position icon, Finisher mode icon, Rotation icon, Quality icon (usually displayed above the Quality key), Application icon (usually displayed above the Reserve folder key), Job number icon. NOTE: During the process of successive copying jobs, the message Copier is warming up may be displayed in the message area of the Basic Screen to maintain the copy image quality.

6-2 Basic Operations

How to Make a Basic Copy (continued)
The Basic Screen (continued)
1 Position original document FACE UP in the document feeder or FACE DOWN on the platen glass. The Basic Screen displays when any key is pressed. 2 Enter the desired print quantity. The entered quantity will be displayed on the upper right position of the message area of the Basic Screen. To change the print quantity, press [C] (CLEAR QTY.) and re-enter print quantity.

Basic Operations 6-29

This function allows you to utilize APS or AMS and copy the original size documents described below onto size 8.5"x11" or 5.5"x8.5", irrespective of the copy paper loading direction. By default, Rotation requires APS or AMS to function; however, the key operator may set the function to always function or never function. See p. 10-48 to p. 10-52.
NOTE: Service can set the copier to display the Output Mode Screen on which the automatic Rotetion function can be activated or deactivated by the touch of the keys. Contact your service representative.
Rotation copying uses memory. ) only) Copy size: 8.5"x11", 8.5"x11"R, 5.5"x8.5" (horizontal loading ( Original size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5" (horizontal loading ( Incompatible: Quality (Very high), Repeat, AUTO layout, Non-image area erase

) only)

Rotation and APS
In APS, the copier automatically uses a 1:1 ratio and makes a copy on the same paper size as the original(s). For example, when size 8.5"x11" copy paper is loaded in the tray horizontally and the copier detects that the original is placed vertically, Rotation and APS function together to rotate the original image by 90 and output the 8.5"x11" copy in the horizontal direction to match the direction of the copy paper.
Original Copy paper Rotation and APS
APS cannot be used alone.
Similarly, when size 8.5"x11" copy paper is loaded in the tray vertically and the copier detects that the original is placed horizontally, Rotation and APS function together to rotate the original image by 90 and output the 8.5"x11" copy in the vertical direction to match the direction of the copy paper.

6-30 Basic Operations

Rotation (continued)

Rotation and AMS

When size 8.5"x11" copy paper is loaded in the tray horizontally and copier detects that the original is placed vertically, Rotation (if required) rotates the original image by 90 and the copy is made with the appropriate AMS ratio to fit the vertical direction of the copy paper.

Original Copy paper Rotation and AMS AMS only
Similarly, when size 8.5"x11" copy paper is loaded in the tray vertically and the copier detects that the original is placed horizontally, Rotation (if required) rotates the original image by 90 and the copy is made with the appropriate AMS ratio to fit the vertical direction of the copy paper.

Original Copy paper

AMS only

Basic Operations 6-31

When the 5.5"x8.5" tray is selected and the copier detects that the original is placed vertically, Rotation rotates the original image by 90 and the copy is made with the appropriate AMS ratio to fit the horizontal direction of the copy paper.
To Release Automatic Rotation
While the Rotation function is initially active on the copier, it can be switched ON/OFF in the Key Operator Mode. Service can set the copier to display Output Mode Screen on which the automatic Rotation function can be activated or deactivated by the touch of the keys. Contact your service representative, if desired. To release automatic Rotation: Press [OUTPUT] to display the Output Mode Screen, then touch AUTO not to highlight it. The Rotation icon will disappear. To recover automatic Rotation: Press [OUTPUT] to display the Output Mode Screen, then touch AUTO to highlight it. The Rotation icon will be display.
Output Mode Screen (machine without Finisher) Output Mode Screen (machine with Finisher)

6-32 Basic Operations

Check Mode and Proof Copy
Use the Check mode to confirm copying selections before pressing the [START PRINT] key. In this mode, use Proof copy to produce a sample of the copied set before copying multiple copies. This is a convenient and cost effective way of viewing the results of the following copying selections. Copying conditions using Memory copy Sheet/Cover insertion Chapter Combination Booklet Image insert Book copy
With Proof copy, all originals are scanned into memory, and only one set is output after you touch PROOF COPY key on the Check Screen. After Proof copy, the V mark will be displayed in the Check Screen. You may change the selection with V mark indicated on the left. When [START PRINT] key is pressed, the job resumes copying until the job is completed.
All settings made can be viewed in the Check Mode Screen. Proof copy cannot be used for testing the Userset density. Proof copy can be operated repeatedly, with the number of operation taken from the print quantity. Proof copy is unavailable with Group, Quality (Very high), and Reserve mode.
Check Screen Check Screen after copying in Proof copy mode

PROOF COPY key

Basic Operations 6-33
Check Mode and Proof Copy (continued)

JOB MEMORY

AUTO RESET
1 Press [CHECK] to display the Check Screen. 2 Confirm the current settings. 3 Verify the settings made for the current job. 4 If necessary, touch PROOF COPY to output a set of sample copy. If only one copied set is needed and the sample set is acceptable, press [STOP/CLEAR] to delete the stored data. 5 Touch EXIT (or press [CHECK]) to exit from the Check mode and return the Basic Screen. 6 If settings are OK, press [START PRINT]. Otherwise, adjust settings, touch OK; then press [START PRINT] when the Basic Screen is displayed. If print quantity is set for two or more, the copier will output all but the sample set.

Output Mode for Machine without Finisher
This section describes five output modes for a copier without the Finisher. For the copier with Finisher installed, refer to p. 7-2 ~ p. 7-13.
Sort with normal exit (default) Group with normal exit Sort with alternate exit Group with alternate exit Face up exit

Normal Exit

Sort with normal exit (default) Example: 3 set copies Group with normal exit Example: 3 set copies

Originals

7-14 Output Modes
Output Mode for Machine without Finisher (continued)

Alternate Exit

Sort with alternate exit Example: 3 set copies (8.5"x11") Group with alternate exit Example: 3 set copies (8.5"x11")

Face Up Exit

Sort with alternate exit
Example: 3 sets copies (8.5"x11") Example: 3 sets copies (8.5"x11")
Originals Sort with normal exit
Example: 3 sets copies Example: 3 sets copies
Group with alternate exit

Group with normal exit

Output Modes 7-15
When Alternate exit is not required, you can use the normal mode with Sort or Group. Sort mode: The original set will be copied in amounts determined by the Print Quantity setting. Sorted sets will not be offset from each other. Group mode: Each original page will be copied in amounts determined by the Print Quantity setting. The grouped sets will not be offset from each other.
1 Press [OUTPUT] to display the Output Mode Screen. 2 Touch SORT or GROUP, then touch OK to complete the setting and return to the Basic Screen.

7-16 Output Modes

In this mode, every other finished set rotates 90 (degrees) upon exit provided 8.5"x11" paper and 8.5"x11"R are separately loaded in trays. Sort with Alternate Exit: The original set will be copied in amounts determined by the Print Quantity setting. Sorted sets will be offset from each other. Group with Alternate Exit: Each original page will be copied in amounts determined by the Print Quantity setting. The grouped sets will be offset from each other.
Not available for the copier with Finisher installed 8.5"x11" and 8.5"x11"R paper should be loaded in any tray including Multi-sheet bypass tray. Use RADF, or operate Memory copy. Available only Group with alternate exit when not using Platen memory copy but setting originals onto the platen glass. Incompatible: APS, Quality (Very high), Sheet/Cover insertion, Booklet, Transparency interleave, Mixed original, Repeat, AUTO layout, Thin/Thick paper, Non-Image area erase

Option: Touch Booklet on the Chapter Insertion Setting No. Screen to use this function. To change the selection of paper tray for copying title pages, touch Copy Insertion on the screen.
6 When all entries are made, touch OK. 7 Enter the desired print quantity. 8 Position originals FACE UP in the document feeder. 50 originals can be set. When using Platen memory copy, position original(s) FACE DOWN on the platen glass and touch SCAN on the Basic Screen to scan. 250 originals can be stored in memory. See p. 6-26. When using the RADF memory copy, position original(s) FACE UP in the document feeder and touch SCAN on the Basic Screen to scan. 250 originals can be stored in memory. See p. 6-28.
9 Press [START PRINT]. After copying is completed, touch Chapter on the Application Selection Screen or press [AUTO RESET] to release the mode and reset the machine.
NOTES: 1. Entering the same page number twice will prevent the copier from proceeding to the next operation. Delete it, if entered. 2. Chapter insertions occur in sequence even if original page numbers are entered out of sequence. 3. When a page number is larger that the total original page count, insertion occurs as the last page of the document. Applications 8-9

Combination

Use this function to lay out and copy a fixed number (2, 4, or 8) of pages onto one sheet of copy paper (2 in 1, 4 in 1, or 8 in 1).
Use RADF. RADF memory copy is available to store up to 1,500 images unless memory overflow occurs. Platen memory copy is available. Original paper: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"R, 5.5"x8.5", A4 (16 lb ~ 32 lb) Copy paper: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"R, A4R, A4 (20 lb bond recommended) AMS is automatically selected. The copy size in tray 1 and original size are sensed, and the correct ratio will be automatically selected.
NOTE: When using any tray other than the tray 1, select the desired tray on the Tray Selection Screen.
Setting options: 2 in 1; 4 in 1; 8 in 1; Layout holiz.; Layout verti. Incompatible: APS, Quality (Very high), Sheet/Cover insertion, Chapter, Booklet, Image insert, Book copy, Mixed original, Repeat, Frame/Fold erasure, AUTO layout, Non-image area erase
Application Selection Screen Combination Mode Selection Screen

8-10 Applications

Combination (continued)
Layout Original Portrait type 2 in in in in in in 1

Landscape type 2 4

Applications 8-21

Text/Photo Enhance
Photo Mode Use the Photo mode to reproduce a half-tone photo image. The copy will closely represent the half-tones of the original image. Text Mode Use the Text mode when copying the text original. In this mode, text is improved in comparison to using the general mode. Increase Contrast Mode Select Increase Contrast to darken lightly printed images (e.g., pencil) without changing background exposure. In cases where the image is light and background is dark, the background will not be changed.
Original paper: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"R, 5.5"x8.5", A4 (16 lb ~ 32 lb) Copy paper: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"R, A4R, A4 (20 lb bond recommended) Memory copy can be used. Setting options: TEXT; PHOTO; INCREASE CONTRAST Incompatible: None
Application Selection Screen Text/Photo Enhance Screen

8-22 Applications

Text/Photo Enhance (continued)
Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation

Standard

Photo mode

Increase contrast mode

Text mode
1 Press [APPLICATIONS] to display the Application Selection Screen. 2 Touch Text/Photo Enhance to enter the Text/Photo Enhance Screen. 3 Touch TEXT, PHOTO, or INCREASE CONTRAST, as required. 4 Touch OK to return to the Application Selection Screen. 5 Select additional copying features, as desired. 6 Touch OK to complete the setting and return to the Basic Screen. 7 Enter print quantity. 8 Position original(s) FACE UP in the document feeder or FACE DOWN on the platen glass. When using Platen memory copy, position original(s) FACE DOWN on the platen glass and touch SCAN on the Basic Screen to scan. See p. 6-26. When using RADF memory copy, position original(s) FACE UP in the document feeder and touch SCAN on the Basic Screen to scan. See p. 6-28.
9 Press [START PRINT]. After copying is completed, touch Text/Photo Enhance on the Application Selection Screen or press [AUTO RESET] to release the mode and reset the machine.

Applications 8-23

Reverse Image
Use Reverse image to reverse the image from black-on-white to white-on-black, and vice versa.
Original paper: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"R, 5.5"x8.5", A4 Copy paper: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"R, A4R, A4 (20 lb bond recommended) Incompatible: Book copy, AUTO layout, Non-image area erase

Reverse Image copying

1 Press [APPLICATIONS] to display the Application Selection Screen. 2 Touch Reverse Image. 3 Select additional copying features, as desired. 4 Touch OK to complete the setting and return to the Basic Screen. 5 Enter print quantity. 6 Position original(s) FACE UP in the document feeder or FACE DOWN on the platen glass. When using Platen memory copy, position original(s) FACE DOWN on the platen glass and touch SCAN on the Basic Scree to scan. See p. 6-26. When using RADF memory copy, position original(s) FACE UP in the document feeder and touch SCAN on the Basic Scree to scan. See p. 6-28.

7 Press [START PRINT]. After copying is completed, touch Reverse Image on the Application Selection Screen or press [AUTO RESET] to release the mode and reset the machine.

8-24 Applications

Repeat
Use Repeat to create labels, business cards, tickets, etc., by repeating the selected image down the page. Manual Setting mode Starting from the upper left corner of the 11"x17" original, select vertical and horizontal dimensions of 10mm ~ 150mm for image area and repeat the original image as many time down the page as your dimensions allow. Auto Setting mode A setting will automatically be made according to the size of the original to allow the image to be repeated the maximum number of times. Non-image area erase will be activated automatically.
Use platen glass. (RADF cannot be used.) Repeat width: 10~150mm Scanning area: 11"x17" ~ 10mm x 10mm Copy paper: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"R, A4R, A4 (20 lb bond recommended) Platen memory copy is available. Copy mode: 1-1 mode only. (When using Platen memory copy, 1-2 mode can be selected.) Setting options: Vertical/ Horizontal; AUTO Incompatible: Using RADF, Alternate exit, Sort, Group, Staple-sort, 1-2 (compatible with Platen memory copy), 2-2, 2-1, APS, AMS, Quality (Very high), Sheet/Cover insertion, Combination, Chapter, Booklet, Transparency interleave, Image insert, Book copy, Mixed original, Reverse image (compatible with Vertical/Horizontal of Repeat), Frame/Fold erasure, AUTO layout, Image shift, Non-image area erase (compatible with AUTO of Repeat)
Application Selection Screen Repeat Mode Selection Screen
NOTE: The auto setting mode of the Repeat image function may not operate properly if the lighting in the work place is directly over the platen glass. In this case consult your service representative about an appropriate place for installation. Applications 8-25

Repeat (continued)

NOTES: 1 A locked job is indicated by a lock icon on the Job key number. 2 Only the key operator can lock a job. 3 A locked job cannot be overwritten unless it is unlocked by the key operator. 4 A blank key indicates that no job is stored under that key. 5 [* * * * * *] displayed on a Job number key indicates that a job is stored but unnamed. 6 Job Memory entries can be recorded on the Job Memory Form included at the end of this section.

Job Memory 9-3

Job Recall
Use Job Recall to recall jobs that are already stored in Job Memory.
Interrupt mode cannot be used while in Job Memory

Job Recall Check Screen

1 Place original(s) as required for the job you are about to recall. 2 Press [JOB MEMORY] to display the Job No. Selection Screen. 3 Touch a Job No. key to select a job you want to recall, and to highlight the key. If required, scroll with the Upper or Lower arrows to reach the desired Job No. key (1~15). To cancel the recall mode, touch CANCEL to return to the Basic Screen. 4 Touch Job Check. The Job Recall Check Screen displays to enable you to review the settings. Touching CANCEL on the Job Recall Check Screen returns to the Job No. Selection Screen. 5 When the desired Job No. key is highlighted, touch OK to complete the setting, and to return to the Basic Screen. To cancel the job, press [AUTO/RESET]. 6 Press [START PRINT].
NOTES: 1 A locked job is indicated by a lock icon on the Job key number. 2 Only the key operator can lock a job. 3 A locked job cannot be overwritten unless it is unlocked by the key operator. 4 A blank key indicates that no job is stored under that key. 5 [* * * * * *] displayed on a Job number key indicates that a job is stored but unnamed. 6 Job Memory entries can be recorded on the Job Memory Form included at the end of this section. 9-4 Job Memory

Job Memory Form

Make a copy of this form to record frequently-used copy jobs stored in Job Memory. Update the information when changes are made. Make additional copies, as needed.

JOB NUMBER/NAME

JOB DESCRIPTION

Job Memory 9-5

Section 10 : Key Operator Mode

To the Key Operator

How to Access the Key Operator Mode
Function Menu Map System Initial [1]
Time [1] Language [2] Output Tray [3]

Copier Initial [2]

Copy Mode [1] Density [2] Magnification [3] Tray [4] Output [5] Image Quality [6]

Preset Key [3]

Density [1] Magnification [2]
ECM (Electronic Copy Monitor) [4]
How to Access the ECM Setting Mode Change ECM Data [1] ECM Data List [2] All Counter Reset [3] ECM On/Off Setting [4] Copy Limit Reached Effect [5]
Lock Job Memory [5] Paper Type [6] Panel Contrast [7] Key Operator Data [8] Weekly Timer [9]
How to Access the Weekly Timer Setting Mode Weekly Timer Setting [1] Weekly Timer Copier ON/OFF Time Set [2] Machine Working Day Individual Set [3] Lunch Hour Off Function [4] Password Setting [5]

10-10 Key Operator Mode

Density [2]
Set Copy density to be effective after power on or after Auto/Reset occurs.
Setting options: AES; manual Default setting: AES on Increase Contrast cannot be set as an initial condition
Key Operator Mode Screen Copier Initial Setting Menu Screen Copy Density Initial Setting Screen
2 Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen. 3 Touch 2. Density to display the Copy Density Initial Setting Screen. 4 Touch AES to select AES mode, or touch the density level required. Nine exposure levels are displayed. 5 Touch OK to complete the setting and return the Copier Initial Setting Menu Screen. 6 If no further changes are required, proceed to step 9. 7 If other copier initial setting changes are required, touch desired key from [1]~[6]. 8 If no other copier initial settings are required, touch RETURN to restore the Key Operator Mode Screen. 9 Turn power OFF. 10 Turn the copier power switch back ON to perform copying operations.

Key Operator Mode 10-11

Magnification [3]
Set the magnification ratio you initially want to display after the user turns the power on or after Auto/Reset restores the Initial settings.
NOTICE: This setting should not conflict with the Initial setting for Paper Tray. For example, if APS is selected for the initial paper tray setting, a ratio setting other than AMS will be ignored.
Setting options: AMS; 1.00; ratio 0.25~4.00
Key Operator Mode Screen Copier Initial Setting Menu Screen Magnification Initial Setting Screen
2 Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen. 3 Touch 3. Magnification to display the Magnification Initial Setting Screen. The default setting is 1.00. 4 Select the desired setting from the Magnification Initial Setting Screen: To select 1.00 if it is not already displayed, touch 1.00. To select another ratio, touch upper/lower arrow key to display the desired ratio, or enter a 3-digit ratio using the keypad on the Control panel. To select AMS, touch AMS. 5 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen. 6 If no further changes are required, proceed to step 9. 7 If other copier initial setting changes are required, touch desired key from [1]~[6]. 8 If no other copier initial settings are required, touch RETURN to restore the Key Operator Mode Screen. 9 Turn power OFF. 10 Turn the copier power switch back ON to perform copying operations.

10-12 Key Operator Mode

Tray [4]
Set paper tray priority to be in effect after power is turned on or after Auto/Reset occurs. This function sets tray priority, not paper size priority. Therefore, if paper size is changed in the tray, the tray will still remain the priority tray. The initial paper tray setting should not conflict with the initial setting for Lens Mode. For example, if the initial paper tray setting is APS, the initial setting for paper tray priority will be ignored.

KRDS Host Menu Screen 10-53
Language [2] 10-7 Language Selection Screen 10-7 LCT (Large Capacity Tray) 11-5 Laser Safety 2-2 Lead Edge Delete 3-11 LEFT BINDING 8-19 Left partition glass 11-9 Lens Mode 6-10~6-16 LENS MODE key 6-11, 6-12, 6-14, 6-15 LIGHT key 10-31 Lighter key 10-17 Limit key 10-22, 10-25 Limited Use 12-3 List Print [14] 10-52 Load RADF effect 10-49 Loading Paper 11-2~11-5 Lock Job Memory [5] 10-29 Lunch Hour Off Function [4] 10-40 Lunch Hour Off Setting Screen 10-40
JAM indicator 6-24 Job Check key 9-4 JOB LIST key 6-22 Job List Screen 6-22 Job Lock key 10-29 Job Memory 9-1~9-5 Job Memory Form 9-5 JOB MEMORY key 9-3, 9-4 Job memory list key 10-52 Job Memory Lock/Delete Screen 10-29 Job memory recall 10-50 Job Name Registration Screen 9-2, 9-3 Job No. Selection Screen 9-2, 9-3, 9-4 Job Recall 9-4 Job Recall Check Screen 9-4 Job Store 9-2~9-3 Job Store Check Screen 9-2, 9-3
Machine Information 3-1~3-12 Machine Labels 2-4 Machine Specifications 13-1~13-4 Machine Working Day Individual Set [3] 10-38~10-39 Magnification [2] 10-18 Magnification [3] 10-11 Magnification Initial Setting Screen 10-11 Magnification Selection Screen 3-11, 6-11, 6-12, 6-14, 6-15 Main power switch 12-2 Maintenance & Supplies 11-1~11-10 Manual Setting Mode 8-25 Manual Shut-Off 5-3 Memory Copy 6-26~6-29 MEMORY COPY key 6-26, 6-29, 8-2 Memory Overflow 12-4~12-7 Memory Switch [13] 10-47~10-51 Memory Switch Screen 10-48 Mixed Original 8-20~8-21 Mixed Original key 8-21 Mixed Originals 4-5, 8-21 Multi-Sheet Bypass Tray 4-6, 4-8, 6-38, 8-4
Key click sound 10-50 Key Operator ECM Form 10-55 Key Operator Data [8] 10-32 Key Operator Data Input Screen 10-32 Key Operator Mode 10-1~10-55 Key Operator Mode Screen 10-2, 10-3, 10-6, 10-7, 10-9, 10-10, 10-11, 10-12, 10-13, 10-14, 10-15, 10-16, 10-17, 10-18, 10-20, 10-21, 10-22, 10-23, 10-24, 10-25, 10-26, 10-27, 10-28, 10-29, 10-30, 10-31, 10-32, 10-34, 10-35, 10-36, 10-37, 10-38, 10-39, 10-40, 10-41, 10-42, 10-43, 10-44, 10-45, 10-46, 10-48, 10-52, 10-53, 10-54 Key Operator Password 3-11, 10-2, 10-3, 10-6, 10-7, 10-9, 10-10, 10-11, 10-12, 10-14, 10-15, 10-16, 10-18, 10-20, 10-22, 10-25, 10-26, 10-27, 10-28, 10-29, 10-30, 10-31, 10-32, 10-34, 10-35, 10-36, 10-38, 10-40, 10-42, 10-43, 10-44, 10-45, 10-48, 10-52, 10-53, Key Operator Password Entry Screen 10-2, 10-3 KRDS Host [15] 10-53~10-Index
Name Input Screen 10-21, 10-22, 10-32 Name key 10-22, 10-25, 10-32 NEXT key 10-46 NO key 10-23, 10-35 No key 10-25, 10-26 No.1 1~4 key 10-17 No.2 5~8 key 10-17 No.3 9~12 key 10-17 No.4 13~16 key 10-17 Non Image Area Erase 10-49
Non-Image Area Erase 3-12, 8-35~8-36 Non-Image Area Erase key 8-36 Non-Sort Mode 7-4~7-5 NOR. key 10-31 NORMAL key 10-15 Normal Exit 7-14, 7-16